POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the...

[u-boot] / README

diff --git a/README b/README
index 7c1634580a28c054a8b5f5955bfa62920e944b24..5e2bca41c1acd9b28ee7ded28e85b2b3048192bf 100644 (file)
--- a/README
+++ b/README
@@ -672,6 +672,7 @@ The following options need to be configured:
 
                CONFIG_RTC_MPC8xx       - use internal RTC of MPC8xx
                CONFIG_RTC_PCF8563      - use Philips PCF8563 RTC
+               CONFIG_RTC_MC13783      - use MC13783 RTC
                CONFIG_RTC_MC146818     - use MC146818 RTC
                CONFIG_RTC_DS1307       - use Maxim, Inc. DS1307 RTC
                CONFIG_RTC_DS1337       - use Maxim, Inc. DS1337 RTC
@@ -1414,6 +1415,11 @@ The following options need to be configured:
                Currently supported on some MPC8xxx processors.  For an
                example, see include/configs/mpc8349emds.h.
 
+               CONFIG_MXC_SPI
+
+               Enables the driver for the SPI controllers on i.MX and MXC
+               SoCs. Currently only i.MX31 is supported.
+
 - FPGA Support: CONFIG_FPGA
 
                Enables FPGA subsystem.
@@ -1555,6 +1561,10 @@ The following options need to be configured:
                before giving up the operation. If not defined, a
                default value of 5 is used.
 
+               CONFIG_ARP_TIMEOUT
+
+               Timeout waiting for an ARP reply in milliseconds.
+
 - Command Interpreter:
                CONFIG_AUTO_COMPLETE
 
@@ -1997,8 +2007,11 @@ Configuration Settings:
 - CFG_BOOTMAPSZ:
                Maximum size of memory mapped by the startup code of
                the Linux kernel; all data that must be processed by
-               the Linux kernel (bd_info, boot arguments, eventually
-               initrd image) must be put below this limit.
+               the Linux kernel (bd_info, boot arguments, FDT blob if
+               used) must be put below this limit, unless "bootm_low"
+               enviroment variable is defined and non-zero. In such case
+               all data for the Linux kernel must be between "bootm_low"
+               and "bootm_low" + CFG_BOOTMAPSZ.
 
 - CFG_MAX_FLASH_BANKS:
                Max number of Flash memory banks
@@ -2743,6 +2756,20 @@ Some configuration options can be set using Environment Variables:
 
   bootfile     - Name of the image to load with TFTP
 
+  bootm_low    - Memory range available for image processing in the bootm
+                 command can be restricted. This variable is given as
+                 a hexadecimal number and defines lowest address allowed
+                 for use by the bootm command. See also "bootm_size"
+                 environment variable. Address defined by "bootm_low" is
+                 also the base of the initial memory mapping for the Linux
+                 kernel -- see the descripton of CFG_BOOTMAPSZ.
+
+  bootm_size   - Memory range available for image processing in the bootm
+                 command can be restricted. This variable is given as
+                 a hexadecimal number and defines the size of the region
+                 allowed for use by the bootm command. See also "bootm_low"
+                 environment variable.
+
   autoload     - if set to "no" (any string beginning with 'n'),
                  "bootp" will just load perform a lookup of the
                  configuration from the BOOTP server, but not try to