board: arm: Add support for Broadcom BCM7445

[u-boot] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5ff6809e94cad5733ac7e31fe18fbf602acab89d..4fbb424037bc9ad3aae37080ffc151836781a0f2 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -74,12 +74,28 @@ config ARM_ASM_UNIFIED
 config THUMB2_KERNEL
        bool
 
+config SYS_ARM_CACHE_CP15
+       bool "CP15 based cache enabling support"
+       help
+         Select this if your processor suports enabling caches by using
+         CP15 registers.
+
 config SYS_ARM_MMU
        bool "MMU-based Paged Memory Management Support"
+       select SYS_ARM_CACHE_CP15
        help
          Select if you want MMU-based virtualised addressing space
          support by paged memory management.
 
+config SYS_ARM_MPU
+       bool 'Use the ARM v7 PMSA Compliant MPU'
+       help
+         Some ARM systems without an MMU have instead a Memory Protection
+         Unit (MPU) that defines the type and permissions for regions of
+         memory.
+         If your CPU has an MPU then you should choose 'y' here unless you
+         know that you do not want to use the MPU.
+
 # If set, the workarounds for these ARM errata are applied early during U-Boot
 # startup. Note that in general these options force the workarounds to be
 # applied; no CPU-type/version detection exists, unlike the similar options in
@@ -92,6 +108,9 @@ config SYS_ARM_MMU
 # CONFIG_ARM_ERRATA_621766
 # CONFIG_ARM_ERRATA_798870
 # CONFIG_ARM_ERRATA_801819
+# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
+
 config ARM_ERRATA_430973
        bool
 
@@ -161,6 +180,12 @@ config ARM_ERRATA_852423
 config ARM_ERRATA_855873
        bool
 
+config ARM_CORTEX_A8_CVE_2017_5715
+       bool
+
+config ARM_CORTEX_A15_CVE_2017_5715
+       bool
+
 config CPU_ARM720T
        bool
        select SYS_CACHE_SHIFT_5
@@ -204,6 +229,15 @@ config CPU_V7M
        select HAS_THUMB2
        select THUMB2_KERNEL
        select SYS_CACHE_SHIFT_5
+       select SYS_ARM_MPU
+       select SYS_THUMB_BUILD
+
+config CPU_V7R
+       bool
+       select HAS_THUMB2
+       select SYS_CACHE_SHIFT_6
+       select SYS_ARM_MPU
+       select SYS_ARM_CACHE_CP15
 
 config CPU_PXA
        bool
@@ -223,6 +257,7 @@ config SYS_CPU
        default "arm1136" if CPU_ARM1136
        default "arm1176" if CPU_ARM1176
        default "armv7" if CPU_V7A
+       default "armv7" if CPU_V7R
        default "armv7m" if CPU_V7M
        default "pxa" if CPU_PXA
        default "sa1100" if CPU_SA1100
@@ -238,6 +273,7 @@ config SYS_ARM_ARCH
        default 6 if CPU_ARM1176
        default 7 if CPU_V7A
        default 7 if CPU_V7M
+       default 7 if CPU_V7R
        default 5 if CPU_PXA
        default 4 if CPU_SA1100
        default 8 if ARM64
@@ -367,7 +403,7 @@ choice
 
 config ARCH_AT91
        bool "Atmel AT91"
-       select SPL_BOARD_INIT if SPL
+       select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
 
 config TARGET_EDB93XX
        bool "Support edb93xx"
@@ -471,13 +507,6 @@ config TARGET_X600
        select SUPPORT_SPL
        select PL011_SERIAL
 
-config TARGET_MX31PDK
-       bool "Support mx31pdk"
-       select BOARD_LATE_INIT
-       select CPU_ARM1136
-       select SUPPORT_SPL
-       select BOARD_EARLY_INIT_F
-
 config TARGET_WOODBURN
        bool "Support woodburn"
        select CPU_ARM1136
@@ -513,6 +542,16 @@ config TARGET_VEXPRESS_CA15_TC2
        select CPU_V7_HAS_VIRT
        select PL011_SERIAL
 
+config ARCH_BCMSTB
+       bool "Broadcom BCM7XXX family"
+       select CPU_V7A
+       select DM
+       select OF_CONTROL
+       select OF_PRIOR_STAGE
+       help
+         This enables support for Broadcom ARM-based set-top box
+         chipsets, including the 7445 family of chips.
+
 config TARGET_VEXPRESS_CA5X2
        bool "Support vexpress_ca5x2"
        select CPU_V7A
@@ -639,6 +678,10 @@ config ARCH_MX28
        select PL011_SERIAL
        select SUPPORT_SPL
 
+config ARCH_MX31
+       bool "NXP i.MX31 family"
+       select CPU_ARM1136
+
 config ARCH_MX7ULP
         bool "NXP MX7ULP"
        select CPU_V7A
@@ -675,6 +718,13 @@ config ARCH_MX5
        select BOARD_EARLY_INIT_F
        imply MXC_GPIO
 
+config ARCH_OWL
+       bool "Actions Semi OWL SoCs"
+       select ARM64
+       select DM
+       select DM_SERIAL
+       select OF_CONTROL
+
 config ARCH_QEMU
        bool "QEMU Virtual Platform"
        select DM
@@ -707,14 +757,27 @@ config ARCH_SNAPDRAGON
 
 config ARCH_SOCFPGA
        bool "Altera SOCFPGA family"
+       select ARCH_EARLY_INIT_R
+       select ARCH_MISC_INIT
        select CPU_V7A
-       select SUPPORT_SPL
-       select OF_CONTROL
-       select SPL_OF_CONTROL
        select DM
+       select DM_SERIAL
        select ENABLE_ARM_SOC_BOOT0_HOOK
-       select ARCH_EARLY_INIT_R
-       select ARCH_MISC_INIT
+       select OF_CONTROL
+       select SPL_LIBCOMMON_SUPPORT
+       select SPL_LIBDISK_SUPPORT
+       select SPL_LIBGENERIC_SUPPORT
+       select SPL_MMC_SUPPORT if DM_MMC
+       select SPL_NAND_SUPPORT if SPL_NAND_DENALI
+       select SPL_OF_CONTROL
+       select SPL_SERIAL_SUPPORT
+       select SPL_DM_SERIAL
+       select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
+       select SPL_SPI_SUPPORT if DM_SPI
+       select SPL_WATCHDOG_SUPPORT
+       select SUPPORT_SPL
+       select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+       select SYS_NS16550
        select SYS_THUMB_BUILD
        imply CMD_MTDPARTS
        imply CRC32_VERIFY
@@ -795,6 +858,15 @@ config ARCH_ZYNQ
        imply CMD_CLK
        imply FAT_WRITE
        imply CMD_SPL
+       imply ARCH_EARLY_INIT_R
+
+config ARCH_ZYNQMP_R5
+       bool "Xilinx ZynqMP R5 based platform"
+       select CPU_V7R
+       select OF_CONTROL
+       select DM
+       select DM_SERIAL
+       select CLK
 
 config ARCH_ZYNQMP
        bool "Xilinx ZynqMP based platform"
@@ -988,6 +1060,19 @@ config TARGET_LS1012A2G5RDB
          development platform that supports the QorIQ LS1012A
          Layerscape Architecture processor.
 
+config TARGET_LS1012AFRWY
+       bool "Support ls1012afrwy"
+       select ARCH_LS1012A
+       select BOARD_LATE_INIT
+       select ARM64
+       imply SCSI
+       imply SCSI_AHCI
+       help
+        Support for Freescale LS1012AFRWY platform.
+        The LS1012A FRWY board (FRWY) is a high-performance
+        development platform that supports the QorIQ LS1012A
+        Layerscape Architecture processor.
+
 config TARGET_LS1012AFRDM
        bool "Support ls1012afrdm"
        select ARCH_LS1012A
@@ -1179,6 +1264,7 @@ config ARCH_STM32MP
        select DM_SERIAL
        select OF_CONTROL
        select OF_LIBFDT
+       select MISC
        select PINCTRL
        select REGMAP
        select SUPPORT_SPL
@@ -1211,9 +1297,7 @@ config ARCH_ROCKCHIP
        select DM_REGULATOR
        select ENABLE_ARM_SOC_BOOT0_HOOK
        select SPI
-       imply CMD_FASTBOOT
        imply DISTRO_DEFAULTS
-       imply FASTBOOT
        imply FAT_WRITE
        imply USB_FUNCTION_FASTBOOT
        imply SPL_SYSRESET
@@ -1252,6 +1336,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcm283x/Kconfig"
 
+source "arch/arm/mach-bcmstb/Kconfig"
+
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-exynos/Kconfig"
@@ -1270,6 +1356,8 @@ source "arch/arm/cpu/armv7/ls102xa/Kconfig"
 
 source "arch/arm/mach-imx/mx2/Kconfig"
 
+source "arch/arm/mach-imx/mx3/Kconfig"
+
 source "arch/arm/mach-imx/mx5/Kconfig"
 
 source "arch/arm/mach-imx/mx6/Kconfig"
@@ -1288,6 +1376,8 @@ source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-owl/Kconfig"
+
 source "arch/arm/mach-rmobile/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
@@ -1318,6 +1408,8 @@ source "arch/arm/cpu/armv7/vf610/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
 
+source "arch/arm/mach-zynqmp-r5/Kconfig"
+
 source "arch/arm/cpu/armv7/Kconfig"
 
 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
@@ -1355,7 +1447,6 @@ source "board/freescale/ls1046ardb/Kconfig"
 source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
-source "board/freescale/mx31pdk/Kconfig"
 source "board/freescale/mx35pdk/Kconfig"
 source "board/freescale/s32v234evb/Kconfig"
 source "board/gdsys/a38x/Kconfig"
@@ -1374,6 +1465,7 @@ source "board/spear/spear600/Kconfig"
 source "board/spear/x600/Kconfig"
 source "board/st/stv0991/Kconfig"
 source "board/tcl/sl50/Kconfig"
+source "board/ucRobotics/bubblegum_96/Kconfig"
 source "board/birdland/bav335x/Kconfig"
 source "board/timll/devkit3250/Kconfig"
 source "board/toradex/colibri_pxa270/Kconfig"