# CONFIG_ARM_ERRATA_621766
# CONFIG_ARM_ERRATA_798870
# CONFIG_ARM_ERRATA_801819
+# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
+
config ARM_ERRATA_430973
bool
config ARM_ERRATA_855873
bool
+config ARM_CORTEX_A8_CVE_2017_5715
+ bool
+
+config ARM_CORTEX_A15_CVE_2017_5715
+ bool
+
config CPU_ARM720T
bool
select SYS_CACHE_SHIFT_5
select CPU_V7_HAS_VIRT
select PL011_SERIAL
+config ARCH_BCMSTB
+ bool "Broadcom BCM7XXX family"
+ select CPU_V7A
+ select DM
+ select OF_CONTROL
+ select OF_PRIOR_STAGE
+ help
+ This enables support for Broadcom ARM-based set-top box
+ chipsets, including the 7445 family of chips.
+
config TARGET_VEXPRESS_CA5X2
bool "Support vexpress_ca5x2"
select CPU_V7A
select BOARD_EARLY_INIT_F
imply MXC_GPIO
+config ARCH_OWL
+ bool "Actions Semi OWL SoCs"
+ select ARM64
+ select DM
+ select DM_SERIAL
+ select OF_CONTROL
+
config ARCH_QEMU
bool "QEMU Virtual Platform"
select DM
bool "Altera SOCFPGA family"
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
- select CPU_V7A
+ select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select DM
select DM_SERIAL
- select ENABLE_ARM_SOC_BOOT0_HOOK
+ select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
select OF_CONTROL
select SPL_LIBCOMMON_SUPPORT
select SPL_LIBDISK_SUPPORT
select SPL_OF_CONTROL
select SPL_SERIAL_SUPPORT
select SPL_DM_SERIAL
+ select SPL_RESET_SUPPORT
select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
select SPL_SPI_SUPPORT if DM_SPI
select SPL_WATCHDOG_SUPPORT
select SUPPORT_SPL
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
select SYS_NS16550
- select SYS_THUMB_BUILD
+ select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
+ select ARM64 if TARGET_SOCFPGA_STRATIX10
imply CMD_MTDPARTS
imply CRC32_VERIFY
imply DM_SPI
imply DM_SPI_FLASH
imply FAT_WRITE
- imply HW_WATCHDOG
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+ select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
+config TARGET_LS1012AFRWY
+ bool "Support ls1012afrwy"
+ select ARCH_LS1012A
+ select BOARD_LATE_INIT
+ select ARM64
+ imply SCSI
+ imply SCSI_AHCI
+ help
+ Support for Freescale LS1012AFRWY platform.
+ The LS1012A FRWY board (FRWY) is a high-performance
+ development platform that supports the QorIQ LS1012A
+ Layerscape Architecture processor.
+
config TARGET_LS1012AFRDM
bool "Support ls1012afrdm"
select ARCH_LS1012A
source "arch/arm/mach-bcm283x/Kconfig"
+source "arch/arm/mach-bcmstb/Kconfig"
+
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
+source "arch/arm/mach-owl/Kconfig"
+
source "arch/arm/mach-rmobile/Kconfig"
source "arch/arm/mach-meson/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/tcl/sl50/Kconfig"
+source "board/ucRobotics/bubblegum_96/Kconfig"
source "board/birdland/bav335x/Kconfig"
source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"