Merge branch 'master' of git://git.denx.de/u-boot-sunxi

[u-boot] / arch / arm / dts / sun50i-h5-nanopi-neo2.dts

diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
index c08af7881b9a7c1154a7213f904247d67836e50a..cc268a69786c532f46e9d8d1ae81e9eadc24c2d0 100644 (file)
--- a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
+++ b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
@@ -1,18 +1,17 @@
 /*
  * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
- *  a) This library is free software; you can redistribute it and/or
+ *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
- *     This library is distributed in the hope that it will be useful,
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
@@ -42,7 +41,6 @@
  */
 
 /dts-v1/;
-
 #include "sun50i-h5.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -52,6 +50,7 @@
        compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
 
        aliases {
+               ethernet0 = &emac;
                serial0 = &uart0;
        };
 
@@ -59,28 +58,102 @@
                stdout-path = "serial0:115200n8";
        };
 
+       leds {
+               compatible = "gpio-leds";
+
+               pwr {
+                       label = "nanopi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               status {
+                       label = "nanopi:blue:status";
+                       gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       reg_gmac_3v3: gmac-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "gmac-3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <100000>;
+               enable-active-high;
+               gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+       };
+
        reg_vcc3v3: vcc3v3 {
                compatible = "regulator-fixed";
                regulator-name = "vcc3v3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
        };
+
+       reg_usb0_vbus: usb0-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb0-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+               status = "okay";
+       };
 };
 
-&mmc0 {
-       compatible = "allwinner,sun50i-h5-mmc",
-                    "allwinner,sun50i-a64-mmc",
-                    "allwinner,sun5i-a13-mmc";
+&ehci0 {
+       status = "okay";
+};
+
+&ehci3 {
+       status = "okay";
+};
+
+&emac {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+       pinctrl-0 = <&emac_rgmii_pins>;
+       phy-supply = <&reg_gmac_3v3>;
+       phy-handle = <&ext_rgmii_phy>;
+       phy-mode = "rgmii";
+       status = "okay";
+};
+
+&external_mdio {
+       ext_rgmii_phy: ethernet-phy@7 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <7>;
+       };
+};
+
+&mmc0 {
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
        status = "okay";
 };
 
+&ohci0 {
+       status = "okay";
+};
+
+&ohci3 {
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;
        status = "okay";
 };
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbphy {
+       /* USB Type-A port's VBUS is always on */
+       usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
+       status = "okay";
+};