Merge branch 'master' of git://git.denx.de/u-boot-sunxi

[u-boot] / arch / arm / dts / sun8i-h3-orangepi-one.dts

diff --git a/arch/arm/dts/sun8i-h3-orangepi-one.dts b/arch/arm/dts/sun8i-h3-orangepi-one.dts
index adab1cbfc921e6a13cbe21dbcaf4d6423b8fd46e..245fd658defbc698bf5f77fe96d8e946c37851b3 100644 (file)
--- a/arch/arm/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-one.dts
@@ -46,7 +46,6 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Xunlong Orange Pi One";
@@ -61,6 +60,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -89,6 +99,35 @@
                        gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
                };
        };
+
+       reg_vdd_cpux: vdd-cpux-regulator {
+               compatible = "regulator-gpio";
+               regulator-name = "vdd-cpux";
+               regulator-type = "voltage";
+               regulator-boot-on;
+               regulator-always-on;
+               regulator-min-microvolt = <1100000>;
+               regulator-max-microvolt = <1300000>;
+               regulator-ramp-delay = <50>; /* 4ms */
+
+               gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+               enable-active-high;
+               gpios-states = <0x1>;
+               states = <1100000 0x0
+                         1300000 0x1>;
+       };
+};
+
+&cpu0 {
+       cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
 };
 
 &ehci1 {
@@ -102,13 +141,24 @@
        status = "okay";
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-       cd-inverted;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+       status = "okay";
+};
+
+&ohci0 {
        status = "okay";
 };
 
@@ -117,37 +167,61 @@
 };
 
 &pio {
-       leds_opc: led_pins@0 {
-               allwinner,pins = "PA15";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       leds_opc: led_pins {
+               pins = "PA15";
+               function = "gpio_out";
        };
 };
 
 &r_pio {
-       leds_r_opc: led_pins@0 {
-               allwinner,pins = "PL10";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       leds_r_opc: led_pins {
+               pins = "PL10";
+               function = "gpio_out";
        };
 
-       sw_r_opc: key_pins@0 {
-               allwinner,pins = "PL3";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       sw_r_opc: key_pins {
+               pins = "PL3";
+               function = "gpio_in";
        };
 };
 
+&reg_usb0_vbus {
+       gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;
        status = "okay";
 };
 
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+       status = "disabled";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+       status = "disabled";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+       status = "disabled";
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
 &usbphy {
-       /* USB VBUS is always on */
+       /* USB Type-A port's VBUS is always on */
+       usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
        status = "okay";
 };