* Code cleanup:

[u-boot] / board / esteem192e / esteem192e.c

diff --git a/board/esteem192e/esteem192e.c b/board/esteem192e/esteem192e.c
index 792a61cf8566d641a7e73ad3451119a36d65aba5..986964b61cae4a7571d67fc25025df918d5e642d 100644 (file)
--- a/board/esteem192e/esteem192e.c
+++ b/board/esteem192e/esteem192e.c
@@ -47,14 +47,14 @@ const uint sdram_table[] =
        /*
         * SDRAM Initialization (offset 5 in UPMA RAM)
         *
-         * This is no UPM entry point. The following definition uses
-         * the remaining space to establish an initialization
-         * sequence, which is executed by a RUN command.
+        * This is no UPM entry point. The following definition uses
+        * the remaining space to establish an initialization
+        * sequence, which is executed by a RUN command.
         * NOP, Program
         */
-        0x0F0A8C34, 0x1F354C37, /* last */
+       0x0F0A8C34, 0x1F354C37, /* last */
 
-        _NOT_USED_,  /* Not used */
+       _NOT_USED_,  /* Not used */
 
        /*
         * Burst Read. (Offset 8 in UPMA RAM)
@@ -87,7 +87,7 @@ const uint sdram_table[] =
         * Exception. (Offset 3c in UPMA RAM)
         */
        0x0FFB8C00, 0x1FF74C03, /* last */
-                               _NOT_USED_, _NOT_USED_
+                               _NOT_USED_, _NOT_USED_
 };
 
 /* ------------------------------------------------------------------------- */
@@ -186,38 +186,38 @@ long int initdram (int board_type)
     else {
 
        if(size_b0 < size_b1) {
-          memctl->memc_br2 &= 0x00007FFE;
-          memctl->memc_br3 &= 0x00007FFF;
+         memctl->memc_br2 &= 0x00007FFE;
+         memctl->memc_br3 &= 0x00007FFF;
 
-         /*
-          * Adjust OR3 for size of bank 1
-          */
-          memctl->memc_or3 |= 15 * size_b1;
+        /*
+         * Adjust OR3 for size of bank 1
+         */
+         memctl->memc_or3 |= 15 * size_b1;
 
-         /*
-          * Adjust OR2 for size of bank 0
-          */
-          memctl->memc_or2 |= 15 * size_b0;
+        /*
+         * Adjust OR2 for size of bank 0
+         */
+         memctl->memc_or2 |= 15 * size_b0;
 
-          memctl->memc_br2 += (size_b1 + 1);
+         memctl->memc_br2 += (size_b1 + 1);
 
        }
        else {
 
-          memctl->memc_br3 &= 0x00007FFE;
+         memctl->memc_br3 &= 0x00007FFE;
 
 
-         /*
-          * Adjust OR2 for size of bank 0
-          */
-          memctl->memc_or2 |= 15 * size_b0;
+        /*
+         * Adjust OR2 for size of bank 0
+         */
+         memctl->memc_or2 |= 15 * size_b0;
 
-         /*
-          * Adjust OR3 for size of bank 1
-          */
-          memctl->memc_or3 |= 15 * size_b1;
+        /*
+         * Adjust OR3 for size of bank 1
+         */
+         memctl->memc_or3 |= 15 * size_b1;
 
-          memctl->memc_br3 += (size_b0 + 1);
+         memctl->memc_br3 += (size_b0 + 1);
 
 
        }
@@ -269,8 +269,6 @@ long int initdram (int board_type)
     immap->im_ioport.iop_pddat = 0x0055;      /* set alternating pattern on test port */
 
 
-
-
     return (size_b0 + size_b1);
 }