serial: Add Actions Semi OWL UART support

[u-boot] / configs / puma-rk3399_defconfig

diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 62a8d7c859f8ca675bd2734b5a5a2a8f150e3340..c11a69bfe670b54bc534f0c2a1eba77af4492aa7 100644 (file)
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -1,20 +1,25 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_TARGET_PUMA_RK3399=y
+CONFIG_DEBUG_UART_BASE=0xFF180000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_STACK_R_ADDR=0x80000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-ddr1600"
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
 # CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
@@ -23,8 +28,9 @@ CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_ATF=y
 CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -54,10 +60,12 @@ CONFIG_ROCKCHIP_EFUSE=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
@@ -74,10 +82,9 @@ CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM=y
 CONFIG_SPL_RAM=y
-CONFIG_DEBUG_UART_BASE=0xFF180000
-CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DM_RTC=y
+CONFIG_RTC_ISL1208=y
 CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_SYS_NS16550=y
 CONFIG_ROCKCHIP_SPI=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y