Merge branch 'master' of git://git.denx.de/u-boot-sunxi

[u-boot] / doc / README.zynq

diff --git a/doc/README.zynq b/doc/README.zynq
index 043c9701409026f7793cdbfc0450462fc094390a..5b0672c50359d95e0cd18a7630bdb8456d097cb6 100644 (file)
--- a/doc/README.zynq
+++ b/doc/README.zynq
@@ -1,10 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0+
 #
 # Xilinx ZYNQ U-Boot
 #
 # (C) Copyright 2013 Xilinx, Inc.
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
 
 1. About this
 
@@ -17,9 +15,8 @@ Xilinx Zynq-7000 All Programmable SoCs enable extensive system level
 differentiation, integration, and flexibility through hardware, software,
 and I/O programmability.
 
-* zc70x
-  - zc702 (single qspi, gem0, mmc) [1]
-  - zc706 (dual parallel qspi, gem0, mmc) [2]
+* zc702 (single qspi, gem0, mmc) [1]
+* zc706 (dual parallel qspi, gem0, mmc) [2]
 * zed (single qspi, gem0, mmc) [3]
 * microzed (single qspi, gem0, mmc) [4]
 * zc770
@@ -30,16 +27,10 @@ and I/O programmability.
 
 3. Building
 
- # Configure for zc70x board
-   $ make zynq_zc70x_config
-     Configuring for zynq_zc70x board...
-
- # Building default dts for zc702 board
+ ex. configure and build for zc702 board
+   $ make zynq_zc702_config
    $ make
 
- # Building specified dts for zc706 board
-   $ make DEVICE_TREE=zynq-zc706
-
 4. Bootmode
 
 Zynq has a facility to read the bootmode from the slcr bootmode register
@@ -64,23 +55,21 @@ bootmode strings at runtime.
 
 - Added basic board configurations support.
 - Added zynq u-boot bsp code - arch/arm/cpu/armv7/zynq
-- Added zynq boards named - zc70x, zed, microzed, zc770_xm010, zc770_xm012, zc770_xm013
+- Added zynq boards named - zc70x, zed, microzed, zc770_xm010/xm011/xm012/xm013
 - Added zynq drivers:
   serial - drivers/serial/serial_zynq.c
   net - drivers/net/zynq_gem.c
   mmc - drivers/mmc/zynq_sdhci.c
-  mmc - drivers/mmc/zynq_sdhci.c
-  spi-  drivers/spi/zynq_spi.c
+  spi - drivers/spi/zynq_spi.c
+  qspi - drivers/spi/zynq_qspi.c
   i2c - drivers/i2c/zynq_i2c.c
+  nand - drivers/mtd/nand/zynq_nand.c
 - Done proper cleanups on board configurations
 - Added basic FDT support for zynq boards
 - d-cache support for zynq_gem.c
 
 6. TODO
 
-- Add zynq boards support - zc770_xm011
-- Add zynq qspi controller driver
-- Add zynq nand controller driver
 - Add FDT support on individual drivers
 
 [1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm