Merge branch 'master' of git://git.denx.de/u-boot-sunxi

[u-boot] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index c19fa142f3a8dc57e05b0ff449f1af5e9621e813..66834c33e30d2cdc121a845cc90c089bc1d5c9e6 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,37 +1,44 @@
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
+# SPDX-License-Identifier: GPL-2.0+
 
-obj-$(CONFIG_$(SPL_)DM)                += core/
-obj-$(CONFIG_$(SPL_)CLK)       += clk/
-obj-$(CONFIG_$(SPL_)LED)       += led/
-obj-$(CONFIG_$(SPL_)PINCTRL)   += pinctrl/
-obj-$(CONFIG_$(SPL_)RAM)       += ram/
+obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
+obj-$(CONFIG_$(SPL_TPL_)DM) += core/
+obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
+obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
+obj-$(CONFIG_$(SPL_TPL_)LED) += led/
+obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
+obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
+obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
+obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
+obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
+obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
 
+ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
+obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
+obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
-obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
-obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
-obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
-obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
-obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
+obj-$(CONFIG_SPL_DM_RESET) += reset/
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
-obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
-obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
 obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
-obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
+obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/
+obj-$(CONFIG_SPL_PCH_SUPPORT) += pch/
+obj-$(CONFIG_SPL_RTC_SUPPORT) += rtc/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
 obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
@@ -39,47 +46,48 @@ obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
-obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
+obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
 obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+obj-$(CONFIG_SPL_FPGA_SUPPORT) += fpga/
+obj-$(CONFIG_SPL_THERMAL) += thermal/
+
+endif
 endif
 
 ifdef CONFIG_TPL_BUILD
 
-obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/
-obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
-obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/
 obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
-obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/
-obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/
-obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/
-obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/
 
 endif
 
 ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
 
 obj-y += adc/
+obj-y += ata/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
+obj-$(CONFIG_FASTBOOT) += fastboot/
+obj-y += firmware/
 obj-$(CONFIG_FPGA) += fpga/
-obj-y += hwmon/
 obj-y += misc/
+obj-$(CONFIG_MMC) += mmc/
+obj-$(CONFIG_NVME) += nvme/
 obj-y += pcmcia/
 obj-y += dfu/
 obj-$(CONFIG_X86) += pch/
+obj-y += phy/allwinner/
 obj-y += phy/marvell/
 obj-y += rtc/
+obj-y += scsi/
 obj-y += sound/
 obj-y += spmi/
 obj-y += sysreset/
-obj-y += timer/
 obj-y += tpm/
-obj-y += twserial/
 obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/