board: arm: Add support for Broadcom BCM7445

[u-boot] / drivers / mmc / Makefile

diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index d505f37f0194ff152747fe8775c3c0cd5192f28f..f6191862d6e33cb4418f63a1b016b15f0f36e3ba 100644 (file)
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -1,12 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
 
 obj-y += mmc.o
 obj-$(CONFIG_$(SPL_)DM_MMC) += mmc-uclass.o
+obj-$(CONFIG_$(SPL_)MMC_WRITE) += mmc_write.o
 
 ifndef CONFIG_$(SPL_)BLK
 obj-y += mmc_legacy.o
@@ -16,9 +15,6 @@ obj-$(CONFIG_SUPPORT_EMMC_BOOT) += mmc_boot.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
-obj-$(CONFIG_SPL_SAVEENV) += mmc_write.o
-else
-obj-y += mmc_write.o
 endif
 
 obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
@@ -49,6 +45,7 @@ obj-$(CONFIG_STM32_SDMMC2) += stm32_sdmmc2.o
 obj-$(CONFIG_MMC_SDHCI)                        += sdhci.o
 obj-$(CONFIG_MMC_SDHCI_ATMEL)          += atmel_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)                += bcm2835_sdhci.o
+obj-$(CONFIG_MMC_SDHCI_BCMSTB)         += bcmstb_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_CADENCE)                += sdhci-cadence.o
 obj-$(CONFIG_MMC_SDHCI_KONA)           += kona_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_MSM)            += msm_sdhci.o
@@ -64,4 +61,6 @@ obj-$(CONFIG_MMC_SDHCI_XENON)         += xenon_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_ZYNQ)           += zynq_sdhci.o
 
 obj-$(CONFIG_MMC_SUNXI)                        += sunxi_mmc.o
-obj-$(CONFIG_MMC_UNIPHIER)             += uniphier-sd.o
+obj-$(CONFIG_MMC_UNIPHIER)             += tmio-common.o uniphier-sd.o
+obj-$(CONFIG_RENESAS_SDHI)             += tmio-common.o renesas-sdhi.o
+obj-$(CONFIG_MMC_BCM2835)              += bcm2835_sdhost.o