Add PCI support for Sorcery board.

[u-boot] / include / configs / Alaska8220.h

diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 49c78200ff6088e18abc2477549369ef984bddc4..dc01f0cb11e3828a05c88a235371d296a8251414 100644 (file)
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -48,38 +48,45 @@
 /*
  * Serial console configuration
  */
-#define CONFIG_PSC_CONSOLE     1       /* console is on PSC */
+
+/* Define this for PSC console
+#define CONFIG_PSC_CONSOLE     1
+*/
+
 #define CONFIG_EXTUART_CONSOLE 1
 
 #ifdef CONFIG_EXTUART_CONSOLE
+#   define CONFIG_CONS_INDEX   1
+#   define CFG_NS16550_SERIAL
 #   define CFG_NS16550
 #   define CFG_NS16550_REG_SIZE 1
 #   define CFG_NS16550_COM1    (CFG_CPLD_BASE + 0x1008)
+#   define CFG_NS16550_CLK     18432000
 #endif
 
 #define CONFIG_BAUDRATE                115200      /* ... at 115200 bps */
 
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200, 230400 }
 
-#define        CONFIG_TIMESTAMP                        /* Print image info with timestamp */
+#define CONFIG_TIMESTAMP                       /* Print image info with timestamp */
 
 /*
  * Supported commands
  */
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_BOOTD   | \
-                               CFG_CMD_CACHE   | \
+#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
+                               CFG_CMD_BOOTD   | \
+                               CFG_CMD_CACHE   | \
                                CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_NET     | \
+                               CFG_CMD_DIAG    | \
+                               CFG_CMD_EEPROM  | \
+                               CFG_CMD_ELF     | \
+                               CFG_CMD_I2C     | \
+                               CFG_CMD_NET     | \
                                CFG_CMD_NFS     | \
-                               CFG_CMD_PING    | \
                                CFG_CMD_PCI     | \
+                               CFG_CMD_PING    | \
                                CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   | \
+                               CFG_CMD_SDRAM   | \
                                CFG_CMD_SNTP    )
 
 #define CONFIG_NET_MULTI
@@ -260,10 +267,17 @@
 #define CFG_BOOTMAPSZ          (8 << 20)   /* Initial Memory map for Linux */
 
 /* SDRAM configuration */
-#define CFG_SDRAM_TOTAL_BANKS           2
-#define CFG_SDRAM_SPD_I2C_ADDR          0x51            /* 7bit */
-#define CFG_SDRAM_SPD_SIZE              0x40
-#define CFG_SDRAM_CAS_LATENCY           4               /* (CL=2)x2 */
+#define CFG_SDRAM_TOTAL_BANKS          2
+#define CFG_SDRAM_SPD_I2C_ADDR         0x51            /* 7bit */
+#define CFG_SDRAM_SPD_SIZE             0x40
+#define CFG_SDRAM_CAS_LATENCY          4               /* (CL=2)x2 */
+
+/* SDRAM drive strength register */
+#define CFG_SDRAM_DRIVE_STRENGTH       ((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
+                                        (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
+                                        (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
+                                        (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
+                                        (DRIVE_STRENGTH_LOW  << SDRAMDS_SBD_SHIFT))
 
 /*
  * Ethernet configuration