+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Timesys Corporation
* Copyright (C) 2015 General Electric Company
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* Configuration settings for the GE MX6Q Bx50v3 boards.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __GE_BX50V3_CONFIG_H
#include <asm/arch/imx-regs.h>
#include <asm/mach-imx/gpio.h>
-#define BX50V3_BOOTARGS_EXTRA
-#if defined(CONFIG_TARGET_GE_B450V3)
-#define CONFIG_BOARD_NAME "General Electric B450v3"
-#elif defined(CONFIG_TARGET_GE_B650V3)
-#define CONFIG_BOARD_NAME "General Electric B650v3"
-#elif defined(CONFIG_TARGET_GE_B850V3)
-#define CONFIG_BOARD_NAME "General Electric B850v3"
-#undef BX50V3_BOOTARGS_EXTRA
-#define BX50V3_BOOTARGS_EXTRA "video=DP-1:1024x768@60 " \
- "video=HDMI-A-1:1024x768@60 "
-#else
-#define CONFIG_BOARD_NAME "General Electric BA16 Generic"
-#endif
+#define CONFIG_BOARD_NAME "General Electric Bx50v3"
#define CONFIG_MXC_UART_BASE UART3_BASE
#define CONSOLE_DEV "ttymxc2"
#define CONFIG_IMX_WATCHDOG
#define CONFIG_WATCHDOG_TIMEOUT_MSECS 6000
-#define CONFIG_LAST_STAGE_INIT
-
-#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_MXC_OCOTP
#endif
/* MMC Configs */
-#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_BOUNCE_BUFFER
/* USB Configs */
#ifdef CONFIG_USB
/* Serial Flash */
#ifdef CONFIG_CMD_SF
-#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 20000000
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
#define CONFIG_LOADADDR 0x12000000
-#define CONFIG_SYS_TEXT_BASE 0x17800000
#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
+ "bootcause=POR\0" \
+ "bootlimit=10\0" \
"image=/boot/fitImage\0" \
+ "fdt_high=0xffffffff\0" \
+ "dev=mmc\0" \
+ "devnum=1\0" \
+ "rootdev=mmcblk0p\0" \
+ "quiet=quiet loglevel=0\0" \
"console=" CONSOLE_DEV "\0" \
- "fdt_high=0xffffffff\0" \
- "sddev=0\0" \
- "emmcdev=1\0" \
- "partnum=1\0" \
- "setargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/${rootdev} rw rootwait cma=128M " \
- BX50V3_BOOTARGS_EXTRA "\0" \
+ "setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
+ "ro rootwait cma=128M " \
+ "bootcause=${bootcause} " \
+ "${quiet} console=${console} ${rtc_status} " \
+ "${videoargs}" "\0" \
+ "doquiet=" \
+ "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
+ "then setenv quiet; fi\0" \
+ "hasfirstboot=" \
+ "ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
+ "/boot/bootcause/firstboot\0" \
+ "swappartitions=" \
+ "setexpr partnum 3 - ${partnum}\0" \
+ "failbootcmd=" \
+ "bx50_backlight_enable; " \
+ "msg=\"Monitor failed to start. Try again, or contact GE Service for support.\"; " \
+ "echo $msg; " \
+ "setenv stdout vga; " \
+ "echo \"\n\n\n\n \" $msg; " \
+ "setenv stdout serial; " \
+ "mw.b 0x7000A000 0xbc; " \
+ "mw.b 0x7000A001 0x00; " \
+ "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
+ "altbootcmd=" \
+ "run doquiet; " \
+ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
+ "run hasfirstboot || setenv partnum 0; " \
+ "if test ${partnum} != 0; then " \
+ "setenv bootcause REVERT; " \
+ "run swappartitions loadimage doboot; " \
+ "fi; " \
+ "run failbootcmd\0" \
"loadimage=" \
"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
- "tryboot=" \
- "if run loadimage; then " \
- "run doboot; " \
- "fi;\0" \
- "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
+ "doboot=" \
+ "echo Booting from ${dev}:${devnum}:${partnum} ...; " \
"run setargs; " \
- "bootm ${loadaddr}#conf@${confidx};\0 " \
+ "bootm ${loadaddr}#conf@${confidx}\0" \
+ "tryboot=" \
+ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
+ "run loadimage || run swappartitions && run loadimage || " \
+ "setenv partnum 0 && echo MISSING IMAGE;" \
+ "run doboot; " \
+ "run failbootcmd\0" \
#define CONFIG_MMCBOOTCOMMAND \
- "setenv dev mmc; " \
- "setenv rootdev mmcblk0p${partnum}; " \
- \
- "setenv devnum ${sddev}; " \
- "if mmc dev ${devnum}; then " \
- "run tryboot; " \
- "setenv rootdev mmcblk1p${partnum}; " \
- "fi; " \
- \
- "setenv devnum ${emmcdev}; " \
"if mmc dev ${devnum}; then " \
+ "run doquiet; " \
"run tryboot; " \
"fi; " \
#define CONFIG_ARP_TIMEOUT 200UL
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_CMDLINE_EDITING
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-#ifndef CONFIG_SYS_DCACHE_OFF
-#endif
-
#define CONFIG_SYS_FSL_USDHC_NUM 3
/* Framebuffer */
+#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_FG_COL 0xFF
+#define CONFIG_SYS_CONSOLE_BG_COL 0x00
+#define CONFIG_HIDE_LOGO_VERSION
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_CMD_BMP
#endif
#define CONFIG_PWM_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
+#define CONFIG_RTC_RX8010SJ
+#define CONFIG_SYS_RTC_BUS_NUM 2
+#define CONFIG_SYS_I2C_RTC_ADDR 0x32
+
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
projects / u-boot / blobdiff