--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Kshitij Gupta <kshitij@ti.com>
+ *
+ * Configuration settings for the 242x TI H4 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
+#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31_HCLK_FREQ 26000000
+#define CONFIG_MX31_CLK32 32000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Temporarily disabled */
+#if 0
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+#endif
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_HARD_I2C 1
+#define CONFIG_I2C_MXC 1
+#define CFG_I2C_MX31_PORT2 1
+#define CFG_I2C_SPEED 100000
+#define CFG_I2C_SLAVE 0xfe
+
+#define CONFIG_MX31_UART 1
+#define CFG_MX31_UART1 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+
+#define CONFIG_BOOTDELAY 3
+
+#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
+
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 192.168.23.168
+#define CONFIG_SERVERIP 192.168.23.2
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
+ "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
+ "bootargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2 rootfstype=jffs2" \
+ "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)" \
+ "bootcmd=run bootcmd_net\0" \
+ "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 $(uimage); bootm\0" \
+ "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; bootm 0x80000000\0" \
+ "unlock=yes\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "prg_uboot=tftpboot 0x80000000 $(uboot); protect off 0xa0000000 +0x20000; erase 0xa0000000 +0x20000; cp.b 0x80000000 0xa0000000 $(filesize)\0" \
+ "prg_kernel=tftpboot 0x80000000 $(uimage); erase 0xa0040000 +0x180000; cp.b 0x80000000 0xa0040000 $(filesize)\0" \
+ "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0"
+
+
+#define CONFIG_DRIVER_SMC911X 1
+#define CONFIG_DRIVER_SMC911X_BASE 0xa8000000
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "uboot> "
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0 /* memtest works on */
+#define CFG_MEMTEST_END 0x10000
+
+#define CFG_LOAD_ADDR 0 /* default load address */
+
+#define CFG_HZ 32000
+
+#define CONFIG_CMDLINE_EDITING 1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x80000000
+#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_FLASH_BASE 0xa0000000
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 259 /* max number of sectors on one chip */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
+
+#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_OFFSET 0x00 /* environment starts here */
+#define CFG_ENV_SIZE 4096
+#define CFG_I2C_EEPROM_ADDR 0x52
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */
+
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV "nor0"
+
+#endif /* __CONFIG_H */
projects / u-boot / blobdiff