configs: Remove empty #ifdef/#ifndef blocks from configs

[u-boot] / include / configs / ipam390.h

diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index f78aa47ae26669d0829c6a31cb0bfbb0df1ed37d..08978fa6581eb1aafd24105612912ecb0d4f9fc8 100644 (file)
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
  * Based on:
@@ -8,8 +9,6 @@
  * Based on davinci_dvevm.h. Original Copyrights follow:
  *
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -19,20 +18,15 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_BARIX_IPAM390
 
 /*
  * SoC Configuration
  */
-#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_SOC_DA8XX               /* TI DA8xx SoC */
-#define CONFIG_SOC_DA850               /* TI DA850 SoC */
 #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
 #define CONFIG_SYS_CLK_FREQ            clk_get(DAVINCI_ARM_CLKID)
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_TEXT_BASE           0xc1080000
 
 /*
  * Memory Info
@@ -59,20 +53,6 @@
 /*
  * PLL configuration
  */
-#define CONFIG_SYS_DV_CLKMODE          0
-#define CONFIG_SYS_DA850_PLL0_POSTDIV  1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV1  0x8000
-#define CONFIG_SYS_DA850_PLL0_PLLDIV2  0x8001
-#define CONFIG_SYS_DA850_PLL0_PLLDIV3  0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV4  0x8003
-#define CONFIG_SYS_DA850_PLL0_PLLDIV5  0x8002
-#define CONFIG_SYS_DA850_PLL0_PLLDIV6  CONFIG_SYS_DA850_PLL0_PLLDIV1
-#define CONFIG_SYS_DA850_PLL0_PLLDIV7  0x8005
-
-#define CONFIG_SYS_DA850_PLL1_POSTDIV  1
-#define CONFIG_SYS_DA850_PLL1_PLLDIV1  0x8000
-#define CONFIG_SYS_DA850_PLL1_PLLDIV2  0x8001
-#define CONFIG_SYS_DA850_PLL1_PLLDIV3  0x8002
 
 #define CONFIG_SYS_DA850_PLL0_PLLM     24
 #define CONFIG_SYS_DA850_PLL1_PLLM     24
@@ -133,13 +113,11 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART0_BASE /* Base address of UART0 */
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-#define CONFIG_CONS_INDEX      1               /* use UART0 for console */
 
 /*
  * Flash & Environment
  */
 #define CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_OFFSET              0x0 /* Block 0--not used by bootcode */
 #define CONFIG_ENV_SIZE                        (128 << 10)
 #define        CONFIG_SYS_NAND_USE_FLASH_BBT
@@ -177,7 +155,6 @@
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_LOAD
 
 /*
@@ -186,7 +163,6 @@
 #ifdef CONFIG_DRIVER_TI_EMAC
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 #define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
@@ -198,13 +174,8 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16 /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_MX_CYCLIC
 
 /*
@@ -225,8 +196,8 @@
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"      \
        "mtddevname=uboot-env\0" \
        "mtddevnum=0\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0"                           \
-       "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                        \
        "u-boot=/tftpboot/ipam390/u-boot.ais\0"                 \
        "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \
                "nand write c0000000 20000 ${filesize}\0"       \
@@ -237,44 +208,17 @@
                "nand write c0000100 180000 20000\0"            \
        "\0"
 
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_SAVES
-
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
 #endif
 
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_LZO
-#define CONFIG_RBTREE
-#define CONFIG_CMD_UBIFS
-
-#define MTDIDS_NAME_STR                "davinci_nand.0"
-#define MTDIDS_DEFAULT         "nand0=" MTDIDS_NAME_STR
-#define MTDPARTS_DEFAULT       "mtdparts=" MTDIDS_NAME_STR ":" \
-                                       "128k(u-boot-env),"     \
-                                       "1408k(u-boot),"        \
-                                       "128k(bootparms),"      \
-                                       "384k(factory-info),"   \
-                                       "4M(kernel),"   \
-                                       "-(rootfs)"
 
 /* defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \
                                                CONFIG_SYS_MALLOC_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SPL_LDSCRIPT    "board/$(BOARDDIR)/u-boot-spl-ipam390.lds"
 #define CONFIG_SPL_STACK       0x8001ff00
 #define CONFIG_SPL_TEXT_BASE   0x80000000
 #define CONFIG_SPL_MAX_SIZE    0x20000
@@ -287,11 +231,8 @@
                                        GENERATED_GBL_DATA_SIZE)
 
 /* add FALCON boot mode */
-#define CONFIG_CMD_SPL
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x00200000
 #define CONFIG_SYS_SPL_ARGS_ADDR       LINUX_BOOT_PARAM_ADDR
-#define CONFIG_CMD_SPL_NAND_OFS                0x00180000
-#define CONFIG_CMD_SPL_WRITE_SIZE      0x400
 
 /* GPIO support */
 #define CONFIG_DA8XX_GPIO