+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
*
* Tom Cubie <tangliang@allwinnertech.com>
*
* Configuration settings for the Allwinner sunxi series of boards.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _SUNXI_COMMON_CONFIG_H
#ifdef CONFIG_ARM64
#define CONFIG_BUILD_TARGET "u-boot.itb"
+#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#endif
/* Serial & console */
#define SDRAM_OFFSET(x) 0x2##x
#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */
-#define CONFIG_SYS_TEXT_BASE 0x2a000000
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
* since it needs to fit in with the other values. By also #defining it
* we get warnings if the Kconfig value mismatches. */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
/* V3s do not have enough memory to place code at 0x4a000000 */
-#ifndef CONFIG_MACH_SUN8I_V3S
-#define CONFIG_SYS_TEXT_BASE 0x4a000000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x42e00000
-#endif
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
* since it needs to fit in with the other values. By also #defining it
* we get warnings if the Kconfig value mismatches. */
#define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */
#ifdef CONFIG_AHCI
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SUNXI_AHCI
#define CONFIG_SYS_64BIT_LBA
#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */
+
+#ifdef CONFIG_ARM64
+/*
+ * This is actually (CONFIG_ENV_OFFSET -
+ * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
+ * directly in a makefile, without the preprocessor expansion.
+ */
+#define CONFIG_BOARD_SIZE_LIMIT 0x7e000
+#endif
+
+#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
+/* If we have two devices (most likely eMMC + MMC), favour the eMMC */
+#define CONFIG_SYS_MMC_ENV_DEV 1
+#else
+/* Otherwise, use the only device we have */
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
#define CONFIG_SYS_MMC_MAX_DEVICE 4
#elif defined(CONFIG_ENV_IS_NOWHERE)
#define CONFIG_ENV_SIZE (128 << 10)
*/
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* standalone support */
#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
-#define CONFIG_SPL_FRAMEWORK
-
#ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */
#define CONFIG_SPL_BOARD_LOAD_IMAGE
#endif
/* GPIO */
#define CONFIG_SUNXI_GPIO
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_VIDEO_SUNXI
/*
* The amount of RAM to keep free at the top of RAM when relocating u-boot,
* to use as framebuffer. This must be a multiple of 4096.
*/
#define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20)
-/* Do we want to initialize a simple FB? */
-#define CONFIG_VIDEO_DT_SIMPLEFB
-
-#define CONFIG_VIDEO_SUNXI
-
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_STD_TIMINGS
#define CONFIG_I2C_EDID
/* allow both serial and cfb console. */
/* stop x86 thinking in cfbconsole from trying to init a pc keyboard */
-#endif /* CONFIG_VIDEO */
+#endif /* CONFIG_VIDEO_SUNXI */
/* Ethernet support */
-#ifdef CONFIG_SUNXI_EMAC
-#define CONFIG_PHY_ADDR 1
+#ifdef CONFIG_SUN4I_EMAC
#define CONFIG_MII /* MII PHY management */
#endif
-#ifdef CONFIG_SUNXI_GMAC
-#define CONFIG_PHY_ADDR 1
+#ifdef CONFIG_SUN7I_GMAC
#define CONFIG_MII /* MII PHY management */
#define CONFIG_PHY_REALTEK
#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
#endif
-#ifdef CONFIG_USB_MUSB_SUNXI
-#define CONFIG_USB_MUSB_PIO_ONLY
-#endif
-
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#endif
-
-#ifdef CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
-#define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
-#define CONFIG_ANDROID_BOOT_IMAGE
-
-#define CONFIG_FASTBOOT_FLASH
-
-#ifdef CONFIG_MMC
-#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
-#endif
-#endif
-
-#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
-#endif
-
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_PREBOOT
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
#endif
#define CONFIG_MISC_INIT_R
#ifndef CONFIG_SPL_BUILD
-#include <config_distro_defaults.h>
#ifdef CONFIG_ARM64
/*
"ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0"
#ifdef CONFIG_MMC
-#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
#if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
-#define BOOT_TARGET_DEVICES_MMC_EXTRA(func) func(MMC, mmc, 1)
+#define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \
+ BOOTENV_DEV_MMC(MMC, mmc, 0) \
+ BOOTENV_DEV_MMC(MMC, mmc, 1) \
+ "bootcmd_mmc_auto=" \
+ "if test ${mmc_bootdev} -eq 1; then " \
+ "run bootcmd_mmc1; " \
+ "run bootcmd_mmc0; " \
+ "elif test ${mmc_bootdev} -eq 0; then " \
+ "run bootcmd_mmc0; " \
+ "run bootcmd_mmc1; " \
+ "fi\0"
+
+#define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \
+ "mmc_auto "
+
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na)
#else
-#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
#endif
#else
#define BOOT_TARGET_DEVICES_MMC(func)
-#define BOOT_TARGET_DEVICES_MMC_EXTRA(func)
#endif
#ifdef CONFIG_AHCI
#define BOOT_TARGET_DEVICES(func) \
func(FEL, fel, na) \
BOOT_TARGET_DEVICES_MMC(func) \
- BOOT_TARGET_DEVICES_MMC_EXTRA(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
BOOT_TARGET_DEVICES_USB(func) \
func(PXE, pxe, na) \
#define SUNXI_MTDPARTS_DEFAULT
#endif
+#define PARTS_DEFAULT \
+ "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \
+ "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \
+ "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \
+ "name=system,size=-,uuid=${uuid_gpt_system};"
+
+#define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b"
+
+#ifdef CONFIG_ARM64
+#define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae"
+#else
+#define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3"
+#endif
+
#define CONSOLE_ENV_SETTINGS \
CONSOLE_STDIN_SETTINGS \
CONSOLE_STDOUT_SETTINGS
"console=ttyS0,115200\0" \
SUNXI_MTDIDS_DEFAULT \
SUNXI_MTDPARTS_DEFAULT \
+ "uuid_gpt_esp=" UUID_GPT_ESP "\0" \
+ "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
+ "partitions=" PARTS_DEFAULT "\0" \
BOOTCMD_SUNXI_COMPAT \
BOOTENV
projects / u-boot / blobdiff