configs: Remove empty #ifdef/#ifndef blocks from configs

[u-boot] / include / configs / sunxi-common.h

diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 582aba298af921c1e1bae96f642a0226f366f2c4..21371f4919f3ae8b38d0127b82cde318254b0754 100644 (file)
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net>
  *
@@ -6,8 +7,6 @@
  * Tom Cubie <tangliang@allwinnertech.com>
  *
  * Configuration settings for the Allwinner sunxi series of boards.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _SUNXI_COMMON_CONFIG_H
@@ -64,7 +63,6 @@
 #define SDRAM_OFFSET(x) 0x2##x
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
 #define CONFIG_SYS_LOAD_ADDR           0x22000000 /* default load address */
-#define CONFIG_SYS_TEXT_BASE           0x2a000000
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
@@ -75,11 +73,6 @@
 #define CONFIG_SYS_SDRAM_BASE          0x40000000
 #define CONFIG_SYS_LOAD_ADDR           0x42000000 /* default load address */
 /* V3s do not have enough memory to place code at 0x4a000000 */
-#ifndef CONFIG_MACH_SUN8I_V3S
-#define CONFIG_SYS_TEXT_BASE           0x4a000000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x42e00000
-#endif
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
@@ -147,6 +140,16 @@
 #endif
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
+
+#ifdef CONFIG_ARM64
+/*
+ * This is actually (CONFIG_ENV_OFFSET -
+ * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
+ * directly in a makefile, without the preprocessor expansion.
+ */
+#define CONFIG_BOARD_SIZE_LIMIT                0x7e000
+#endif
+
 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
 #define CONFIG_SYS_MMC_ENV_DEV         1
@@ -180,8 +183,6 @@
 
 #define CONFIG_SYS_MONITOR_LEN         (768 << 10)     /* 768 KiB */
 
-#define CONFIG_SPL_FRAMEWORK
-
 #ifndef CONFIG_ARM64           /* AArch64 FEL support is not ready yet */
 #define CONFIG_SPL_BOARD_LOAD_IMAGE
 #endif
@@ -286,12 +287,10 @@ extern int soft_i2c_gpio_scl;
 
 /* Ethernet support */
 #ifdef CONFIG_SUN4I_EMAC
-#define CONFIG_PHY_ADDR                1
 #define CONFIG_MII                     /* MII PHY management           */
 #endif
 
 #ifdef CONFIG_SUN7I_GMAC
-#define CONFIG_PHY_ADDR                1
 #define CONFIG_MII                     /* MII PHY management           */
 #define CONFIG_PHY_REALTEK
 #endif
@@ -302,13 +301,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 #endif
 
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#endif
-
-#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
-#endif
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_PREBOOT
 #endif
@@ -316,7 +308,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_MISC_INIT_R
 
 #ifndef CONFIG_SPL_BUILD
-#include <config_distro_defaults.h>
 
 #ifdef CONFIG_ARM64
 /*