configs: Remove empty #ifdef/#ifndef blocks from configs

[u-boot] / include / configs / zynq-common.h

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index b10cb3f572204131e2af35d3b322eb917504036d..a6f2aceea1def75f60e32637874bf9d3bbc0bd09 100644 (file)
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- * (C) Copyright 2013 Xilinx, Inc.
+ * (C) Copyright 2013 - 2018 Xilinx, Inc.
  *
  * Common configuration options for all Zynq boards.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_ZYNQ_COMMON_H
@@ -38,19 +37,9 @@
 #if defined(CONFIG_ZYNQ_GEM)
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHY_MARVELL
-# define CONFIG_PHY_REALTEK
-# define CONFIG_PHY_XILINX
-# define CONFIG_BOOTP_BOOTPATH
-# define CONFIG_BOOTP_GATEWAY
-# define CONFIG_BOOTP_HOSTNAME
 # define CONFIG_BOOTP_MAY_FAIL
 #endif
 
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-#endif
-
 /* QSPI */
 #ifdef CONFIG_ZYNQ_QSPI
 # define CONFIG_SF_DEFAULT_SPEED       30000000
@@ -79,11 +68,6 @@
 #define CONFIG_MTD_DEVICE
 #endif
 
-/* MMC */
-#if defined(CONFIG_MMC_SDHCI_ZYNQ)
-# define CONFIG_ZYNQ_SDHCI_MAX_FREQ    52000000
-#endif
-
 #ifdef CONFIG_USB_EHCI_ZYNQ
 # define CONFIG_EHCI_IS_TDI
 
@@ -91,7 +75,6 @@
 # define DFU_DEFAULT_POLL_TIMEOUT      300
 # define CONFIG_USB_CABLE_CHECK
 # define CONFIG_THOR_RESET_OFF
-# define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
        "dfu_ram_info=" \
        "set dfu_alt_info " \
@@ -124,19 +107,9 @@
 # define DFU_ALT_INFO
 #endif
 
-#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQ_USB)
-# define CONFIG_SUPPORT_VFAT
-#endif
-
-#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
-#define CONFIG_SYS_I2C_ZYNQ
-#endif
-
 /* I2C */
 #if defined(CONFIG_SYS_I2C_ZYNQ)
 # define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ_SPEED             100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE             0
 #endif
 
 /* EEPROM */
@@ -149,7 +122,9 @@
 #endif
 
 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE                        (128 << 10)
+#ifndef CONFIG_ENV_SIZE
+# define CONFIG_ENV_SIZE                       (128 << 10)
+#endif
 
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -157,14 +132,15 @@
 /* Environment */
 #ifndef CONFIG_ENV_IS_NOWHERE
 # define CONFIG_ENV_SECT_SIZE          CONFIG_ENV_SIZE
-# define CONFIG_ENV_OFFSET             0xE0000
+# ifndef CONFIG_ENV_OFFSET
+#  define CONFIG_ENV_OFFSET            0xE0000
+# endif
 #endif
 
 /* enable preboot to be loaded before CONFIG_BOOTDELAY */
 #define CONFIG_PREBOOT
 
 /* Boot configuration */
-#define CONFIG_BOOTCOMMAND             "run $modeboot || run distro_bootcmd"
 #define CONFIG_SYS_LOAD_ADDR           0 /* default? */
 
 /* Distro boot enablement */
@@ -172,7 +148,6 @@
 #ifdef CONFIG_SPL_BUILD
 #define BOOTENV
 #else
-#include <config_distro_defaults.h>
 
 #ifdef CONFIG_CMD_MMC
 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
@@ -186,7 +161,7 @@
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
-#if defined(CONFIG_CMD_PXE)
+#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 #else
 #define BOOT_TARGET_DEVICES_PXE(func)
@@ -264,9 +239,6 @@
 
 /* Miscellaneous configurable options */
 
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
 #define CONFIG_SYS_MAXARGS             32 /* max number of command args */
 
@@ -285,11 +257,6 @@
                                        CONFIG_SYS_INIT_RAM_SIZE - \
                                        GENERATED_GBL_DATA_SIZE)
 
-/* Enable the PL to be downloaded */
-#define CONFIG_FPGA_ZYNQPL
-
-/* FIT support */
-#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
 /* Extend size of kernel image for uncompression */
 #define CONFIG_SYS_BOOTM_LEN   (60 * 1024 * 1024)
@@ -302,7 +269,6 @@
 /* Commands */
 
 /* SPL part */
-#define CONFIG_SPL_FRAMEWORK
 
 /* MMC support */
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
@@ -328,7 +294,6 @@
 
 /* qspi mode is working fine */
 #ifdef CONFIG_ZYNQ_QSPI
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x100000
 #define CONFIG_SYS_SPI_ARGS_OFFS       0x200000
 #define CONFIG_SYS_SPI_ARGS_SIZE       0x80000