serial: Add Actions Semi OWL UART support

[u-boot] / include / i2c.h

diff --git a/include/i2c.h b/include/i2c.h
index 7726028044e32c4d2ebeb949283c4564d8cbd0ee..d33f827500b17dbbf7f9e722b760b3b3fc27c4aa 100644 (file)
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2009 Sergey Kubushyn <ksi@koi8.net>
  * Copyright (C) 2009 - 2013 Heiko Schocher <hs@denx.de>
@@ -6,8 +7,6 @@
  * (C) Copyright 2001
  * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
  *
- * SPDX-License-Identifier:    GPL-2.0+
- *
  * The original I2C interface was
  *   (C) 2000 by Paolo Scaffardi (arsenio@tin.it)
  *   AIRVENT SAM s.p.a - RIMINI(ITALY)
@@ -660,12 +659,7 @@ extern struct i2c_bus_hose i2c_bus[];
 #endif
 
 #ifndef I2C_SOFT_DECLARATIONS
-# if defined(CONFIG_MPC8260)
-#  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
-# elif defined(CONFIG_8xx)
-#  define I2C_SOFT_DECLARATIONS        volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-# elif (defined(CONFIG_AT91RM9200) || \
+# if (defined(CONFIG_AT91RM9200) || \
        defined(CONFIG_AT91SAM9260) ||  defined(CONFIG_AT91SAM9261) || \
        defined(CONFIG_AT91SAM9263))
 #  define I2C_SOFT_DECLARATIONS        at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA;
@@ -674,15 +668,6 @@ extern struct i2c_bus_hose i2c_bus[];
 # endif
 #endif
 
-#ifdef CONFIG_8xx
-/* Set default value for the I2C bus speed on 8xx. In the
- * future, we'll define these in all 8xx board config files.
- */
-#ifndef        CONFIG_SYS_I2C_SPEED
-#define        CONFIG_SYS_I2C_SPEED    50000
-#endif
-#endif
-
 /*
  * Many boards/controllers/drivers don't support an I2C slave interface so
  * provide a default slave address for them for use in common code.  A real
@@ -814,11 +799,6 @@ static inline u8 i2c_reg_read(u8 addr, u8 reg)
 {
        u8 buf;
 
-#ifdef CONFIG_8xx
-       /* MPC8xx needs this.  Maybe one day we can get rid of it. */
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
 #ifdef DEBUG
        printf("%s: addr=0x%02x, reg=0x%02x\n", __func__, addr, reg);
 #endif
@@ -830,11 +810,6 @@ static inline u8 i2c_reg_read(u8 addr, u8 reg)
 
 static inline void i2c_reg_write(u8 addr, u8 reg, u8 val)
 {
-#ifdef CONFIG_8xx
-       /* MPC8xx needs this.  Maybe one day we can get rid of it. */
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
 #ifdef DEBUG
        printf("%s: addr=0x%02x, reg=0x%02x, val=0x%02x\n",
               __func__, addr, reg, val);