]> git.sur5r.net Git - u-boot/shortlog
u-boot
2017-03-29 Stefan Roesenet: mvpp2: Remove unreferenced in_use_thresh from...
2017-03-29 Stefan Roesenet: mvpp2: Configure SMI PHY address needed for PHY...
2017-03-29 Stefan Roesenet: mvpp2: Enable PHY polling mode on PPv2.2
2017-03-29 Stefan Roesenet: mvpp2: Add missing PHY_INTERFACE_MODE_RGMII_ID
2017-03-29 Stefan Roesenet: mvpp2: Add GoP and NetC support for port 0 (SFI)
2017-03-29 Stefan Roesenet: mvpp2: Add GoP and NetC support for ports 2 &...
2017-03-29 Stefan Roesenet: mvpp2: Read phy-speed from DT to select between...
2017-03-29 Stefan Roesenet: mvpp2: Restructure probe / init functions
2017-03-29 Stefan Roesenet: include/phy.h: Add new PHY interface modes
2017-03-29 Stefan Roesenet: mvpp2: Add RX and TX FIFO configuration for PPv2.2
2017-03-29 Stefan Roesenet: mvpp2: Handle eth device naming in multi-CP case...
2017-03-29 Stefan Roesearm64: mvebu: armada-7k/8k: Enable MVPP2 ethernet driver
2017-03-29 Thomas Petazzoniarm64: marvell: dts: add PPv2.2 description to Armada...
2017-03-29 Stefan Roesenet: mvpp2: Enable compilation for Armada 7K/8K platforms
2017-03-29 Stefan Roesenet: mvpp2.c: Clear all buffer / descriptor areas befor...
2017-03-29 Stefan Roesenet: mvpp2: Move probe function from MISC to ETH DM...
2017-03-29 Stefan Roesenet: mvpp2: Add MDIO support for PPv2.2
2017-03-29 Thomas Petazzoninet: mvpp2: finally add the PPv2.2 compatible string
2017-03-29 Thomas Petazzoninet: mvpp2: adapt rxq distribution to PPv2.2
2017-03-29 Thomas Petazzoninet: mvpp2: rework RXQ interrupt group initialization...
2017-03-29 Thomas Petazzoninet: mvpp2: add AXI bridge initialization for PPv2.2
2017-03-29 Thomas Petazzoninet: mvpp2: handle misc PPv2.1/PPv2.2 differences
2017-03-29 Thomas Petazzoninet: mvpp2: handle register mapping and access for...
2017-03-29 Thomas Petazzoninet: mvpp2: adjust mvpp2_{rxq,txq}_init for PPv2.2
2017-03-29 Thomas Petazzoninet: mvpp2: adapt mvpp2_defaults_set() to PPv2.2
2017-03-29 Thomas Petazzoninet: mvpp2: adapt the mvpp2_rxq_*_pool_set functions...
2017-03-29 Thomas Petazzoninet: mvpp2: adjust the allocation/free of BM pools...
2017-03-29 Thomas Petazzoninet: mvpp2: introduce PPv2.2 HW descriptors and adapt...
2017-03-29 Thomas Petazzoninet: mvpp2: introduce an intermediate union for the...
2017-03-29 Thomas Petazzoninet: mvpp2: add hw_version field in "struct mvpp2"
2017-03-29 Thomas Petazzoninet: mvpp2: add and use accessors for TX/RX descriptors
2017-03-29 Thomas Petazzoninet: mvpp2: store physical address of buffer in rx_desc...
2017-03-29 Thomas Petazzoninet: mvpp2: remove support for buffer header
2017-03-29 Thomas Petazzoninet: mvpp2: use "dma" instead of "phys" where appropriate
2017-03-29 Stefan Roesenet: mvpp2: enable building on 64-bit platforms (more...
2017-03-29 Thomas Petazzoninet: mvpp2: enable building on 64-bit platforms
2017-03-29 Thomas Petazzoninet: mvpp2: simplify MVPP2_PRS_RI_* definitions
2017-03-29 Thomas Petazzoninet: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DE...
2017-03-29 Thomas Petazzoninet: mvpp2: remove unused register definitions
2017-03-29 Thomas Petazzoninet: mvpp2: simplify mvpp2_bm_bufs_add()
2017-03-29 Stefan Roesenet: mvpp2: Round up top tx buffer boundaries for dcach...
2017-03-29 Stefan Roesebitops.h: Include bitsperlong.h as needed for GENMASK_ULL
2017-03-29 Vlad Zakharovarc: use timer driver for ARC boards
2017-03-29 Vlad Zakharovarc: dts: separate single axs10x.dts file
2017-03-29 Vlad Zakharovdrivers: timer: Introduce ARC timer driver
2017-03-29 Dirk Eibacharm: mvebu: Add gdsys ControlCenter-Compact board
2017-03-29 mario.six@gdsys.ccdm: Add callback to modify the device tree
2017-03-29 Stefan Roesearm: mvebu: theadorable: Add 'pcie' test command
2017-03-29 Stefan Roesearm: mvebu: theadorable: Add board-specific PEX detecti...
2017-03-29 Stefan Roesearm: mvebu: AXP: Add possiblity to configure PEX detect...
2017-03-29 Konstantin... arm64: a37xx: Remove DM_I2C_COMPAT from the board config
2017-03-29 Konstantin... arm64: a37xx: Disable DB configurations on ESPRESSOBin...
2017-03-29 Konstantin... arm64: mvebu: Add default config for ESPRESSOBin board
2017-03-29 Konstantin... arm64: dts: Add device tree for ESPRESSOBin board
2017-03-29 Konstantin... mvebu: a37xx: Add init for ESPRESSBin Topaz switch
2017-03-29 Konstantin... mvebu: neta: a37xx: Add fixed link support to neta...
2017-03-29 Konstantin... mvebu: neta: Add support for board init function
2017-03-29 Konstantin... arm64: a37xx: Handle pin controls in early board init
2017-03-29 Konstantin... arm64: a37xx: dts: Add pin control nodes to DT
2017-03-29 Konstantin... arm64: a37xx: Enable bubt command support on A3720-DB
2017-03-29 Konstantin... arm64: a37xx: Enable Marvell ETH PHY support
2017-03-29 Konstantin... arm64: mvebu: Rename the db-88f3720 to armada-37xx...
2017-03-29 Konstantin... mvebu: usb: xhci: Add VBUS regulator supply to the...
2017-03-29 Konstantin... arm64: mvebu: Add default configuraton for MACCHIATOBin...
2017-03-29 Rabeeh Khouryarm64: mvebu: dts: Add DTS file for MACCHIATOBin board
2017-03-29 Konstantin... mvebu: pcie: Add support for GPIO reset for PCIe device
2017-03-29 Konstantin... arm64: mvebu: dts: Add i2c1 pin definitions to CPM
2017-03-29 Konstantin... arm64: mvebu: gpio: Add GPIO nodes to A8K family devices
2017-03-29 Philipp Tomsichdtoc: make ScanTree recurse into subnodes
2017-03-29 Jean-Jacques... drivers: ti_qspi: use syscon to get the address ctrl_mo...
2017-03-29 Jean-Jacques... regmap: use fdt address translation
2017-03-29 Lokesh Vutladm: core: Fix Handling of global_data moving in SPL
2017-03-29 Stefan Roesemmc: xenon_sdhci: Add missing host->max_clk to Xenon...
2017-03-29 Xu Ziyuanmmc: drop unnecessary send_status request
2017-03-29 Kevin Liummc: sdhci: only flush cache for data command
2017-03-29 Felipe Balbimmc: tangier: Add Intel Tangier eMMC/SDHCI driver
2017-03-29 Felipe Balbimmc: pci: Add CONFIG_MMC_PCI
2017-03-21 Lokesh Vutlaconfigs: am43xx_evm: Enable SPL_DM
2017-03-21 Lokesh VutlaARM: AM43xx: Enable DM_I2C/SPI/ETH
2017-03-21 Lokesh VutlaARM: dts: am43xx: Add u-boot specific dtsi
2017-03-21 Lokesh Vutlaconfigs: dra7xx_evm: Enable SPL_DM
2017-03-21 Lokesh Vutlaconfigs: am57xx_evm: Enable SPL_DM
2017-03-21 Lokesh VutlaARM: dts: OMAP5+: Add u-boot specific dtsi
2017-03-21 Lokesh VutlaARM: OMAP2+: define _image_binary_end to fix SPL_OF_CONTROL
2017-03-21 Tom Rinispl: Correct call to spl_common_init() with SPL_STACK_R...
2017-03-20 Jon Masonboard: ns2: Add support for Broadcom Northstar 2
2017-03-20 ahaslam@baylibre.comda850: Add instructions to copy AIS image to NAND
2017-03-20 Max FilippovPass empty CFLAGS on invocation of libfdt/setup.py
2017-03-20 George McCollisterKconfig: Don't use RSA_FREESCALE_EXP on IMX
2017-03-20 Tero KristoARM: am43xx: fix SOC revision print outs
2017-03-20 Robert P. J... test-fit.py: Minor grammar/spelling/clarification tweaks
2017-03-20 Philipp Tomsichpart_efi: document device-tree binding for part_efi...
2017-03-20 Philipp Tomsichdoc: move documentation for /config node into a separat...
2017-03-20 Philipp Tomsichpart_efi: support padding between the GPT header and...
2017-03-20 Roger Quadrosnet: don't override ethernet address environment
2017-03-20 Roger QuadrosARM: k2g: setup PRU ethernet MAC addresses
2017-03-20 Roger QuadrosARM: Use Kconfig for board EEPROM's I2C bus and chip...
2017-03-20 Nishanth Menonboard: ti: am57xx-idk: Auto detect LCD Panel
2017-03-20 Roger Quadrosboard: ti: am571x-idk: Update pinmux for ICSS2 Ethernet
2017-03-20 Roger Quadrosboard: ti: am571x-idk: Support 6 port Ethernet or 4...
next