2 Release 1.38.4 16Jan06 released 17 Jan 06:
4 - Add two new queries to query.sql provided by Arno. One
5 list volumes known to the Storage device, and the other
6 lists volumes possibly needing replacement (error, ...).
8 - Add periodic (every 24 hours) garbage collection of memory
9 pool by releasing free buffers.
11 - Correct bug counting sized (for display only) in smartall.c
12 - Print FD mempool stats if debug > 0 rather than 5.
14 - Correct bug in alist.c that re-allocated the list if the
15 number of items goes to zero.
16 - Move the reservation system thread locking to the top level
17 so that one job at a time tries all possible drives before
19 - Implement a reservation 'fail' message queue that is built
20 and destroyed on each pass through the reservation system.
21 These messages are displayed in a 'Jobs waiting to reserve
22 a drive' list during a 'status storage='. Note, multiple
23 messages will generally print for each JobId because they
24 represent the different problems with either the same drive
25 or different drives. If this output proves too confusing
26 of voluminous, I will display it only when debug level 1
27 or greater is enabled in the SD.
29 - Add enable/disable job=<job-name>. This command prevents
30 the specified job from being scheduled. Even when disabled,
31 the job can be manually started from the console.
32 - During 'update slots' clear all InChanger flags where the
33 StorageId is zero (old Media records).
38 - Fix autochanger code to strip leading spaces from returned
39 slots number. Remove bc from chio-changer.
40 - Back port a bit of 1.39 crypto code to reduce diffs.
41 - Fix first call to autochanger that missed close()ing the
42 drive. Put close() just before each run_program(). Fixes
45 - Add PoolId to Job record when updating it at job start time.
47 - Pull in more code from 1.39 so that there are fewer file
48 differences (the new ua_dotcmds.c, base64.h, crypto.h
49 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
50 util.c. Aside from ua_dotcmds.c these are mostly crypto
52 - Implement new method of walking the jcr chain. The
53 incr/dec of the use_count is done within the walking
54 routines. This should prevent a jcr from being freed
55 from under the walk routines.
57 Release 1.38.3 05Jan06:
59 - Move the suitable_drive flag to a better place to prevent
60 premature termination of the reservation if all drives
61 are busy -- should fix Arno's diff/inc pool failures.
63 - Add mutex to single thread VSS code in Win32.
67 - Add OPENSSL_INC to console dependencies, lib dependencies, and
68 wx-console dependencies in Makefile.in
69 - Add OPENSSL INC/LIB to gnome2_console Makefile.in.
70 - Simplify code in askdir.c that waits for creating an appendable
71 volume so that it can handle multiple returns from the wait
73 - Modify the wait code to permit multiple returns.
74 - Return a zero when "autochanger drives" is called and
75 it is not an autochanger.
76 - Make rewind_dev() a method taking a DCR as an argument.
77 This permits closing and reopening the drive if the
78 rewind fails as happens if the drive was loaded while the
79 file descriptor was open. This refreshes the file descriptor.
80 - Remove the ST_OPENED flag and always rely on fd < 0 for knowing
81 if the device is open or not. This should eliminate
83 - Return error if reserve cannot find at least one suitable device.
84 - Make wait_for_sysop() return correct state information.
85 - Fix Win32 state file problem. write was not using compat
86 code. This should fix bug #500.
88 - Modify gui on command to set only GUI mode and not batch.
89 - Modify .messages command to always print messages regardless
91 - If GUI mode is on, suppress automatic printing of
93 - Delete old bnet packet code.
94 - Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
96 - Modify restore command in wx-console to set gui on and to use
97 only .messages instead of messages. Hopefully this fixes bug
101 - Fix seg fault in exit of acquire when canceling a job --
102 reported by Wolfgang Denk
104 - Implement load balancing code.
105 - Pull a few files from 1.39 where we can maintain compatibility.
106 - Rewrite reservation algorithm again. Rename variables to be
107 more logical, add HEARTBEAT with Director, allow cancel of
108 jobs stuck in reservation, add last resourt any_drive.
110 - Remove quotes from Version table name -- it breaks things.
111 - Fix seg fault if user labels a drive directly bug #513
112 - Remove quotes around Version as it breaks things.
114 - Merge in Aleksandar Milivojevic's mods to the spec file.
115 - Apply sparse code fix for raw drives and fifos. Bug 506
116 - Thorsten fixed Unicode cd problem with wx-console bug 505.
118 - Correct reservation system to do a last ditch try
119 for any mounted volume, then anyone anywhere.
120 - Add quotes around table Version because of
121 error in MySQL 4.1.15 -- bug report submitted.
122 - Correct some minor problems with btape in the fill
124 - Updates to ssh-tunnel from Joshua Kugler.
125 - Added a report.pl program from Jonas Bjorklund.
126 - Simplify the O_NONBLOCK open() code for tape drives,
127 and always open nonblocking.
128 - Do not wait for open() if EIO returned (shouldn't happen).
129 - Eliminate 3 argument to tape open().
130 - Correct the slot # edited in the 3995 Bad autochanger unload
132 - With -S on bscan (show progress) do not divide by zero.
134 - Make cancel pthread_cond_signal() pthread_cond_broadcast().
135 - When dcr is freed, also broadcast dev->wait_next_vol signal.
136 - Remove unused code in wait_for_device.
137 - Make wait_for_device() always return after 120 seconds of wait.
139 - Use localhost if no network configured
141 - Eliminated duplicate MaxVolBytes in cat update -- bug 509.
142 - Remove debug print.
143 - Add bail_out in error during state file reading.
145 - Merge updates into 1.38 branch
146 - Update specs to include mysql4 define.
147 - Stop read_record() if status not ok in second loop.
148 - Return rec->FileIndex in dcr->VolLastIndex for normal
149 and partial records in read_record(). This allows bscan
150 to get FileIndex at EOT correct.
151 - Fix butil.c to correctly set dcr -- fixes seg fault in bls.
153 - Apply patch supplied by user (slightly modified) to fix
154 correct detection of holes in block devices and FIFOs.
156 - Apply patch supplied by user (slightly modified)
157 to fix SD hang with multiple pools and bad client
160 - Add nagios plugin to the examples directory. Submitted by
162 - Remove warning message about multiple saves of hardlinked files
163 from find_one.c as it can generate too many warning messages.
165 - Reset timeout values before select() per patch from
166 Frank Sweetser for problems with non-blocking sockets.
167 - Unlink the state file if either reading or writing it gets
168 errors. Hopefully this will fix Win32 exit problems.
169 - Add sanity check in append.c to ensure that dcr is not NULL.
170 This can happen if multiple drive autochanger SCSI control
171 channel and drive indicies do not correspond.
173 - Get next volume from Scratch pool before creating a volume.
174 - Set new Pool defaults in Vol when moved from Scratch Pool.
175 - Remove argument from create_bacula_database for SQLite as it
177 - Add back next_vol index code so that two drive autochangers can get
179 - Change a bunch of debug levels to aid debugging autochangers.
180 - Fix reservation so that mutexes are properly applied.
181 - Rework reservation algorithm so that two drives can be used
184 - Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
185 If this patch is applied, the number of days can be specified with
186 "list nextvol days=xx"
189 My use case is to be able to preview the next scheduled job (and the
190 next tape to be used) on fridays if there are no scheduled jobs during
193 - Fix font code in gnome2 console user patch. Fixes bug #501.
194 - Fix malformatted bnet error message that caused seg fault
196 - Applied user patch to improve README.vc8 in src/win32.
198 - Correct some more editing of JobId's (for 64 bit compatibility).
199 - Ensure that StorageId is stored in Media record when ever possible.
200 - Add Migration Job to Job.
201 - Change Start Storage daemon job to require read and write storage
203 - Pass read storage data to SD as well as write storage data.
204 - Remove old code from winservice.cpp
205 - Break on error in scan.
206 - Fix typo in signal.c
207 - Separate read/write DCR in SD. Add jcr->read_dcr.
208 - Cleanup how find_device() works.
209 - Add read output to Status in SD.
211 - Remove abs() in bfile.c so that it compiles on Solaris. Bug #491.
213 Changes to 1.38.2: 22 November 2005
214 - Fix crash in tray-monitor when daemon disconnects. Bug #479.
215 - Fix bnet-server bug found on OpenBSD. Bug #486
216 - Fix cancel failure bug. Bug #481
217 - Fix failure when Pool name has spaces. Bug #487
218 - Fix SD crash in autochanger code. Mutex failure. Bug #488
219 - Fix a couple of free()s in src/filed/acl.c
220 - Fix memory overrun in bfile.c in building OS X resource
221 fork filename. Bug #489
222 - Add Pool name to SD status output.
223 - Add Python install dir for Solaris to configure. Bug #492
225 Changes to 1.38.1: 15 November 2005
226 - Apply SunOS patch for ACLs submitted by David Duchscher.
227 - Make sure to set storage before trying to set drive.
228 - Add bacula_mail_summary.sh to examples directory. It makes
229 a single email summary of any number of jobs. Submitted
231 - Make sure when we do a mount to unblock the device even
232 if the drive could not be opened.
233 - Merge Scott's new spec files.
234 - Add doc on setting up Win32 environment variable supplied
235 by Kees van den Broek.
236 - Turn off API debug output unless debug set to avoid confusing
238 - Add Solaris ACL detection in configure.in as supplied by
240 - Implement "autochanger drives" protocol so that Dir knows
241 how many drives an autochanger has.
242 - Do not request drive number in label, ... if only one drive.
243 - Turn off debug code.
244 - Fix update slots to clear slot number of every slot before
245 setting it. This fixes (I believe) bug #471
246 - Make unmount unload the autochanger slot.
247 - Modify open() on mount to be read-only and non-blocking,
248 otherwise the mount can block for a long time.
249 - Make a few error message numbers unique.
250 - Make a few error messages more correct.
251 - Apply patch from Thorsten to fix Win98 stat() command.
252 - Remove delete of CVS from all makefiles.
253 - Fix seg fault when clicking on Add button in wx-console
254 restore panel. Bug #470.
255 - Fix copyright date and URL typo -- bug #468.
256 - Change autostart install for FreeBSD to look for rc.conf
257 rather than rc.local as suggested fix for bug #466.
258 - Apply patch supplied by Eric Bollinger to fix PostgreSQL
259 grant on status. Bug #465
260 - Apply patch supplied by Eric Bollinger to fix PostgreSQL
261 update script. Bug #464
262 - Fix off by one for last Slot of autochanger for label.
263 - Update release date.
264 - Tweak an authentication error message in dir.
265 - Fix autoloader so that mutex is set and released around
266 each run_program(). There was a missing set.
267 - Remove an unnecessary drive release in autochanger.
268 - Modify configure.in to add execute option to sqlite3 catalog
270 - Create update_xxx_table_8_to_9 scripts for updatedb
271 - Fix wrong variable in bpipe.c debug output reported by user.
272 - Fix improper placement of encode_and_send_attributes() in
273 FD backup.c causing first file of non-portable Win32 backup
274 to have wrong stream. Reported by Thorsten.
275 - Move the -lcrypt for PostgreSQL after the PostgreSQL libs in
276 autoconf/bacula-macros/db.m4 as suggested by user. Fixes bug #457.
277 - Remove @STATIC_CONS@ from tray-monitor Makefile as suggested
278 by user. Fixes bug #456.
280 Released 1.38.0 (28Oct05): 31 October 2005
284 - Don't overwrite pthreadVCE.dll or msvcr71.dll during Win32
286 - Update README.win32 instructions.
288 - Make db_get_job_record() return Name so that the ACL
289 can be checked. Fixes bug #446
291 - Insure that all the SD tools init the Autochanger
296 - Print error message if no Changer Command found.
297 - Apply fix from Martin Simmons to clear structure before
298 using it in IPADDR -- fixes a bind() bug on AIX.
300 - Add NetBSD fstype patch from Geert Hendrickx <ghen@telenet.be>
301 - Update num_parts only when writing to DVD.
303 - Fix error conditions in bpipe.c DVD routine (terminate buffer).
304 - Use a bigger buffer 32K as suggested by Arno in bpipe.c.
305 - Increase dvd mount timeout with patch from Arno.
306 - Modify DVD code so that it keeps a state flag that indicates
307 when the freespace variable is valid. freespace_errno, now has
308 either 0 or an errno. There are no negative errnos.
309 - Create is_freespace_ok() to test state flag. Also, set_freespace_ok()
310 and clear_freespace_ok(). Modify code to use them. This
311 simplifies a bit the logic of the freespace code.
312 - Edit 64bit debug values correctly in dvd.c
313 - Fix %e variable to check num_parts rather than part.
314 - Use static buffer instead of static buffers for FI_to_ascii()
315 and stream_to_ascii() debug routines in SD. This is to prevent
316 possible race conditions between two threads (possibly Phil's
319 - Add a .dir command that separates arguments with commas. It
320 is intended to be used in the tree routines to get a
321 machine readable output for GUIs like wx-console.
322 - Make configure set dvd-handler to have execute permission.
323 - Install dvd-handler as is done for other dvd-xxx scripts.
324 - In block.c call dvd_write_part() to write last part rather
325 than dvd_open_next_part().
326 - Prefix some DVD subroutines with dvd_
328 - Add extra debug to Update media error for VolFiles decrease
330 - Do not update dev->file on set_ateof() for non-tape.
332 - Mark DVD volume in error if part cannot be written.
333 - If a DVD is mounted, unmount it before asking operator
334 to mount an different one.
335 - Add Arno's dvd-handler script to the scripts directory and
336 integrate with configure. It replaces both existing scripts.
337 - Make default schedule start at 23:10
338 - Implement gui release in Makefile. It creates two .tar.gz
339 bacula-web and bimagemgr.
341 - Add README plus tar release to gui project.
342 - Manual documentation
343 - Tweak bacula.man doc
344 - Add PRAGMA synchronous = NORMAL; to SQLite3 tables. This
345 speeds up SQLite3 so it is only about 10% slower than version
346 2.xx. Thanks to Russell Howe for this tip.
347 - Add msvcr71.dll to pebuilder .inf file as it is needed by
348 Bacula FD. Thanks to Brandon for passing this fix to Scott.
350 - Add VolumePurged method to Python JobEvents class. Fixes
352 - Add JobId index to File table for MySQL.
353 - Correct tray-monitor crash of bacula-dir. qstatus_cmd()
354 code referenced the wrong pointer. Fixes bug #438.
355 - Add bacualnovss.mak file from Martin.
356 - Remove Pool from restore string in wbrestorepanel.cpp. Patch
357 from user for bug #433.
358 - Correct code in wbrestorpanel.cpp with misplaced parens. Patch
359 from user for bug #431
360 - Correct printing filenames/date/times in wbrestorepanel.cpp due to bad
361 column alignment. Patch from user for bug #432.
365 - Add fix to compat.h supplied by Martin Simmons that permits
366 building the Win32 FD without VSS.
368 - Bring cats/bdb_x.c routines up to version 1.37 (return values
371 - Integrate libwrap patch from Szechuan Death. They should
373 - Clean up patches directory for next release.
374 - Add PS variable in bacula.in script as recommended by a user.
375 - Correct mtx-changer.in so it only creates a temp file when
377 - Add patch supplied by user in a bug report to fix gnome2
379 - Add patch from Peter Eriksson <peter@ifm.liu.se> to correct
380 NLS error in tray-monitor.c
382 - Add code to catalog_update to detect NULL db pointer.
383 - Remove char *msg argument from catalog_request and
386 - Fix mode change open in btape.c
387 - Use nonblocking opens on Linux only.
388 - Move set_blocking code for tapes into method to
389 simplify main line code.
390 - Cleanup the code for ensuring we advance tape on fsf.
391 This should fix IBM problems -- patch from Adam Thorton
393 - Remove test for BMT_EOD in fixup_device... this eliminates
394 need for status_dev() routine.
395 - Before doing label ensure device is in read-write mode.
399 - Tweak daemon.c berrno, copyright.
401 - Fix handling of temp file in mtx_changer.in, reported as
402 a security bug, but it is not really. Bug #422
403 - Fix security problem of handling temp file in randpass.
405 - During label/relabel, add new_volume to VOLRES list in SD.
407 - Apply Landon's patch for the TLS ANS1 API change.
409 - Make single exit path in first_open_device().
411 - Make new_volume walk through all Vols looking for dev
414 - Make "quit" command in console always allowed.
415 - Remove the storage list between each console command to
416 keep Dir from remembering a previously selected SD.
417 - Add code to reservation VOLRES subroutines to try to ensure
418 we don't end up with two Volumes on the same drive.
419 - Simplify the mutex code in VOLRES a bit to reduce the chance
422 - Apply Nicolas' dvd-freespace.in patch.
423 - Make sure SQL table names are not translated.
424 - Eliminate incorrect message saying barcodes not
425 found in "label barcodes" -- fixes bug report.
429 - Add ability to have passwords on backup of catalog as
430 alternate 3rd argument. Submitted by Andrew Ford
431 <A.Ford@ford-mason.co.uk>
432 - Turn off TapeAlert by default if user enables a Device
433 and add a note to install mtx.
435 - Fix out of order volumes during restore.
439 - Final tweaks to build Win32.
440 - Enable debug code in ua_label.c
441 - Remove devices from the Volume list even if no
442 Volume is in drive. Hopefully this fixes Arno's problem
443 of multiple volumes listed in the same drive.
445 - Apply Landon's patch for TLS default values.
446 - Correct LOCALEDIR problem in build of Win32
447 - Correct ssize_t problem in build of Win32
448 - Add code to llprint pools and volumes to debug next item.
449 - From bug report, fix resetting Pool defaults in Volume. It
450 was a typo "Max" was missing in several places.
451 - Don't allow translation of database Volume Status values.
453 Changes to 1.37.37 released 26 Aug 05
455 - Ensure that the drive is closed before calling the
456 mtx-changer script so that the script can access the drive.
457 - Add drive name to reserved Volume list printout in SD.
459 - Fix bug in acquire.c that incorrectly reported volume
461 - Add additional debug code and messages in reserve.c
462 - Eliminate unwanted warning message in reserve.c
464 Changes to 1.37.36 released 22 Aug 05
466 - Landon's fix for NLS detection
467 - Eliminate incorrect compiler warning on FreeBSD.
468 - Move Win32 errno message build into berrno constructor.
471 - A number of minor Win32 fixes.
472 - Remove a PostQuitMessage() as suggested by Thorsten so that
473 BartPE restore can work correctly.
474 - Fix for create JobMedia so that VolIndex remains valid even
475 during a delete Job or pruning -- bug 402.
476 - Minor tweak for Win32 build.
478 - Win32 fix -- remove debug O_NONBLOCK code.
479 - Fix bug 399 -- make_catalog_backup does not work for sqlite3
480 - Implement unloading a volume in a different drive if it
481 is needed in the current drive.
482 - Implement search for unused autochanger drive.
483 - Implement search for exact Volume in reservation before
485 - Fix picking up drive in Dir so that it is not done in
487 - Eliminate double check on "loaded" for autochanger.
489 - Start coding better reservation algorithm
490 - Always look for slot for label command.
491 - Add more debug code for autochangers.
492 - Apply fix from Stephan Leemburg <sleemburg@jvc.nl> for
493 improper scanning of schedule resource:
494 Run = Level=Full Pool=Catalog daily at 1:20
495 - Apply patch from Chris Lee <labmonkey42@gmail.com> for
496 adding --enable-build-dird --enable-build-stored.
497 - Tweak datadir definition in configure.in
499 - Fix bug that missed drive=nn specification.
500 - Eliminate nonblocking kludge in heartbeat of FD as
501 it caused high CPU usage.
502 - Pickup loaded slot when doing open() of tape drive.
503 - Make autochanger reservation code go through full list
504 first pass until exact match found.
506 - Fix how FileSet is saved in job record to correct continual
508 - Make datadir print on config.out listing.
509 - Move get FileSet record up in backup init to eliminate continual
510 Full save seen by Peter Sjoberg.
511 - Add VolumeName to read-only Python variables.
512 - Add VolumePurged event for Python.
513 - Suppress /dev/ Filesystem change prohibited INFO messages.
514 - Do not delete FT_RAW files before restore (allows FIFOs
515 to be used for restore).
517 - Add drive specification to mount, unmount, release, label,
518 and relabel for Autochangers. Note Dir<->SD protocol has
523 - Disable parts of NLS as the configure does not work here.
524 - In job backup init (backup.c) define definitive Job level and
525 since time, *then* apply Job Pool override selection if any.
527 - Modified bconsole script so that it is improperly
528 installed, it will refuse to execute. This avoids
529 recursive call loops.
533 - Apply David's ACL fix to src/filed/acl.c
535 - Apply patches sent by David Duchscher <kreios@gmail.com> for
536 making ACLs work on MacOS X and FreeBSD.
538 - Apply patch in bug#397 that improved configure
539 - find readline under $with_readline/include/readline
540 - no libutil under Solaris
541 - no need for -ldl under Solaris
542 - Make reservation system single threaded during the
543 search to avoid two threads competing for the same
545 - Correct a return code in find_suitable_device_for_job()
546 Possibly cause of "busy writing to another volume".
548 - Modify open() for tape so nonblocking really works.
549 - Use fcntl() to reset blocking status rather than close()
550 and reopen the drive.
551 - Make sure dev->open() is always called so that any change
552 in read/write permissions will occur.
553 - Open drives initially in daemon in read-only mode.
554 - Ensure that each time the VolHdr.VolumeName is zapped
555 or changed that free_volume() is called on the old name.
559 - Require 5 arguments to mtx-changer except list and slots
560 - Turn -EPIPE status returns from bpipe to ETIME
561 - Include Slot in SD status output
562 - Do not term_dev() during initialization in SD if the device
563 could not be opened. In the case of a tape drive, there may
564 be no tape in the drive.
568 - Correct PostgreSQL database scripts as suggested by a user.
569 - Add additional info to FATAL message generated when a device
570 is busy writing to another volume.
571 - Suppress an inappropriate NULL Volume name message after a cancel.
572 - Correct a warning message in reserve.c
574 - Apply user's patch to make mutiple modifiers for times
576 - Make read_dev_volume_label() handle ANSI/IBM labels
577 correctly -- ie space over any label at the beginning
580 - Make ANSI/IBM writing of HDR1/2 labels ignore any
581 errors if at end of tape.
582 - Apply Martin's patch to improve Python detection in
584 - Temporarily turn off disk seeking until I find the
585 cause of the problem.
587 - Add OSF1 patch supplied by user.
588 - Use number of files selected from write_bsr() only
589 if it is not defined.
590 - Explicitly seek to end of file when getting size for
592 - Correctly set EndBlock position in JobMedia record
594 - Remove unnecessary set StartBlock in bscan. Caused bscan
597 - Modify mtx-changer to wait a maximum of 300 seconds.
598 - Do restart of failed jobs only for Backups job types.
599 - A number of DVD updates from Nicolas.
601 - Turn off old service helper code in Win32.
602 - Correct Messages bug found by Phil in stored.
604 - Complete (almost) documentation of 1.38.
605 - Add error messages for error conditions with VSS.
606 - Fix additional problems with VSS backup that I introduced.
609 - Correct compiler complaints in wx-console and tray-monitor.
610 - Correct VSS problems recognizing c:
611 - Add VSS before job status
612 - Fix output of status from being one big line.
613 - Change cd xx; make to cd xx && make as suggested by Phil.
614 - Cleanup projects file
615 - Remove unnecessary casting of FF_PKT in filed.
616 - Apply Thorsten's bugfix for vss_generic.cpp
617 - Add check for df path for dvd_freespace
618 - Use df to get space used on DVD.
619 - Change sense of flag indicating erase DVD or not before writing.
620 - Fix bpipe so that it never modifies the result pointer.
621 - Replace more dev_name by print_name().
622 - Rewrite edit_device_codes_dev() so it does not overwrite the
624 - Update printing of labels (for bls) so that critical information
625 is printed (Job name and timestamp).
626 - Cleanup old spool files when starting the SD.
627 - Modify vss.cpp to allow C: as a path name. Otherwise VSS
628 doesn't work when only a drive name is given.
629 - Modify vss.c to eliminate double / in filenames.
630 - Update doc -- particularly the restore chapter.
632 - Make all files in working directory have .xxx at end.
633 - Work on DVD writing.
634 - Fix keepatime bug (bugs database).
635 - Move Python variables from Job to Bacula. They are
636 DirName, Version, ConfigFile, and WorkingDir
637 - Fix delete of bootstrap to only occur on Bacula created
639 - Allow cancelling a Job name that is not active. It is
642 - Fix name space pollution by OpenSSL 0.9.8 reported by
643 Matthias Kurz -- applied his patch.
644 - Fix bpipe.c so that it does not modify results pointer.
645 ***FIXME*** calling sequence should be changed.
646 - Remove some remaining references to dev_name.
647 - Fix calls to mount_dev() and unmount_dev() to
648 correspond to returned value (bool instead of int).
649 - Try without success to make DVD writing work.
652 - Convert dvd-writepart to Python.
653 - Increase delay from 3 seconds to 5 seconds between SIGTERM and SIGKILL when
654 killing external programs.
656 - Add gettext macros in autoconf/gettext-macros.
657 - Modify how localedir is set in configure.in.
658 - Remove setlocale check (useless).
660 - Mark translatable strings in all source files.
662 - Create French and Italian translation files (fr.po, it.po).
663 - Add support for translation in configure and Makefiles.
664 - Update autoconf/aclocal.m4 so it is automatically created with aclocal
665 (Note: autoconf/gnome-macros is not used anymore, it may be removed).
667 - Fix src/lib/bpipe.c:run_program and run_program_full_output to detect if the watchdog
668 killed the program, and return an error if it is the case.
670 - Modify parse_config to get a LEX_ERROR_HANDLER as a parameter
671 - lex_open_file now returns NULL if the file can't be opened. All calling functions have
673 - Remove set_exit_on_error function
675 - Fix "unknown device type" problem with DVD devices.
676 - Fix crash when there is no media in the DVD drive.
678 - Update the documentation and ReleaseNotes.
680 - Add FreeSpaceCommand in Device (SD configuration file) and implement it.
681 - Some modifications (again) on how guessed volume names are handled (now it should work).
682 - Part files on the hard disk are removed if they are empty.
684 - Major fixes on how guessed volume names are handled.
685 - Minor fix in src/stored/append.c.
686 - Replace, when possible, POOLMEM by POOL_MEM in the new code of src/stored/dev.c.
687 - New script, scripts/dvd-freespace, which gets the free space available on a writable DVD.
689 - Add WritePartAfterJob directive in Job resource (Director)
690 - Add WritePartAfterJob directive in Schedule Resource (Director)
691 - Implement these new directives
693 - New function, open_guess_name_dev in src/stored/dev.c, which tries to guess the volume
694 name of a mounted device, so the label can be read.
695 - New script, scripts/dvd-writepart, which write parts to DVD+/-R(W).
696 - Removed WriteFirstPartCommand directive in Device (SD configuration file).
697 - Use readdir_r instead of readdir (src/stored/dev.c:open_guess_name_dev).
699 - Add RequiresMount, MountPoint, MountCommand, UnmountCommand directives in Device (SD configuration file).
700 - Implement these directives (volumes can now be restored from a manually written DVD).
701 - Add WriteFirstPartCommand, WritePartCommand directives in Device (SD configuration file).
702 - Implement these directives (DVD writing now works).
703 - New function run_program_full_output in src/lib/bpipe.c.
704 - Lots of bugfixes and cleanups in the new code.
706 - Add VolParts field in Media table
707 - Add MaximumPartSize directive in Device (SD configuration file)
708 - File Volumes can now be splitted in multiple files ("parts")
709 - Fix SQL error in sql_list while doing "llist jobmedia"
711 Changes to 1.37.30 released 16 July 2005:
713 - Fix "dir" command scanning field misalignment in
715 - Switch to using the wxWidgets Unicode library.
716 - Include msvcr71.dll in distribution.
717 - Add VSS to status line in Win32 FD if enabled.
718 - Get VSS build scripts working with Thorsten's help.
719 - Unlink the bootstrap file after sending it to
721 - Remove sending include/exclude lists to the FD during
722 a restore -- deprecated code.
723 - Cleanup the bootstrap files in the FD.
727 - Remove old commented out code from configure.in
728 - Add baculavssfd.mak file for building VSS version of
730 - Correct date (year) in vss.cpp and vss_generic.cpp
732 - I finally found and squashed the elusive SD crash.
733 I needed to initialize the used volume list before
734 firing off the device initialization thread.
737 - Make sure that bpipe results are zapped even on
739 - Lots of documentation.
740 - Do not prune volume marked as append when needing a
742 - Print a warning message in SD if a non-used Volume
743 is specified and autolabel not turned on.
744 - Correct a bug in chksum.c concerning SHA1 signatures
745 (an * should have been & when checking for a bit flag).
746 - Print File:Block for all label records in label.c -- concerns
747 primarily bls when doing Job listings (-j).
748 - Correct is_volume_in_use() to return false if testing
749 on the same device where the Volume is already mounted.
750 - Define a init_done flag in the SD that is set when the
751 devices are initialized and make users connecting wait.
752 This prevents useless connect failure warning messages.
753 - Do additional device locking in ask_op_to_mount_volume()
754 to prevent race conditions with a user labeling a Volume
757 - Add a test for error return from bnet_wait... in heartbeat.c
758 in FD to avoid CPU loop.
759 - Implement TLS in gnome console and wx-console.
763 - Correct a NULL pointer reference in the mount command.
764 - Correct typo in Copyright
765 - Add detection of EOM for IBM drives (i.e. errno == ENOSPC)
767 - Remove temp file created in mtx-changer script.
768 - Make fsf_dev() into a class method.
770 - Modify mtx-changer.in script to return slot:barcode for
771 Volumes that are loaded in the drives.
772 - Correct some more places where dev->is_blocked() needs
773 to be checked in dircmd.c in SD.
776 - Add code to ensure that reserved but unused volumes
778 - Correct how Volumes are mounted and handled so that the SD
779 does not get stuck if multiple volumes are used (recycling,
781 - Correct bug where you could relabel a volume while it
782 was being acquired -- created chaos.
784 - Correct seg fault caused by open() calling sequence change.
786 - Add new rc-chio-changer script by Rudolf Cejka to
787 examples/autochangers
788 - Apply Rudolf's changes to bacula.in
789 - Expand the space from 8 to 10 characters in editing
790 file sizes for restore and dir of catalog, otherwise
791 GB sizes are truncated -- fixes bug report.
792 - Modify wx-console to know about 10 character widths.
793 - Allow decending into top level directory if "recurse=no"
794 is set. Fixes a bug report.
795 - Install pthreadVCE.dll when installing console or wx-console
796 on Win32 systems. Fixes bug report.
798 - Tweak dvd-writepart script to prevent door from opening/closing
800 - Remove GROUP BY in several PostgreSQL commands to prevent error.
802 - Ensure that < as first character of filename list is not treated
803 as a directory for restore.
804 - Add debug to heartbeat in FD as it seems to go into an
805 infinite loop from time to time during SD failure in DVD writing.
806 - Add more debug code to dvd writing.
807 - Attempt not to destroy existing fs on DVD.
809 - Detect device mounted for DVD and suppress be sure to
810 mount message after label.
811 - Set Cleaning tape status to "Cleaning" and force no
813 - Get DVD writing working with new standard Bacula open()
815 - Rename get_filename() to make more sense.
816 - Detect "is already mounted on" on mount command so to avoid
817 error if device is already mounted.
818 - Eliminated guess_name() code. It may be necessary to
820 - Eliminate seg fault from printing invalid results.
821 - Make dvd_write_part() bool.
824 - Attempt to fix DVD writing by eliminating a number of the
825 DVD subroutines to simplify.
826 - Modify DEVICE::open() to take dcr as first argument. This
827 will permit providing more info to DVD opening.
828 - Fix scanning for time/size items which in some cases
830 - Eliminate read_dvd_volume_label(). New code (not yet written)
831 *must* open dvd appropriately before calling
832 read_dev_volume_label.
833 - Modify open_first_part() open_next_part() to take DCR as
835 - Make label command from console work on DVDs.
836 - Make mount command from console work on DVDs.
837 Unmount does not work yet.
841 - Add Database vendor to CatalogRes tuple for Python.
843 - Implement DoesVolumeExist(Vol) for Python.
844 - Prevent python command from seg faulting if no arg given.
848 - Add set_mode method in DEVICE.
849 - Correct set_mode method in DEVICE
850 - Add more DVD debug info
852 - Check for incorrect duration and size modifiers in conf files.
854 - Make Version a tuple (version, build-date)
855 - Add CatalogRes tuple (DBName, Address, User, Password,
857 - Add Version, ConfigFile, and WorkingDir as Python attributes
859 - Implement code (principally for Win32) that on failure to
860 create a file, it will cd into the directory and attempt
861 to create the file using a relative path. This avoids creating
862 files with paths which fail on Win32.
863 - Fix parsing of times and sizes with decimal numbers.
864 - Make free_volume_list() in SD work if vol list is not
865 initialized (./bacula-sd -t).
867 - Add debug error printout when open() fails.
868 - If open() of DVD fails in mount.c, return false.
869 - Split open() code for DVD into separate subroutine in dev.c
871 Changes to 1.37.25 released on 20 Jun 05:
873 - Fix bug where Storage daemon gets confused about what
874 tape is mounted. (one line of code was inadvertently
879 - DVD writing/reading seems to be mostly working.
880 - Set execute bits on dvd-freespace and dvd-writepart
881 - Make dvd-freespace use existing dummy file.
882 - Modify dvd-freespace to pickup size from Track Size:
884 - Add Date, Job, level to updates to .bsr file in
886 - Add debug info to dvd-freespace.in
887 - Fix hard coded bacula.sql in make_catalog_backup reported
889 - Make sure a verify volume to catalog never reports an error
890 if there are zero files to verify.
891 - Remove confusing debug info in filed/backup.c on network
893 - Make sure output from console is not sent to system log.
894 - Convert open_dev() into a class method.
895 - Change VolHdr.VolName to VolHdr.VolumeName.
896 - Add a flag in the device state word to indicate that
897 we found Media in the drive (DVD).
898 - Make mount_dev() and unmount_dev() return bool.
900 Changes from Nicolas Boichat:
902 - Modify parse_config to get a LEX_ERROR_HANDLER as a parameter
903 - lex_open_file now returns NULL if the file can't be opened. All calling functions have
905 - Remove set_exit_on_error function
907 - Fix "unknown device type" problem with DVD devices.
908 - Fix crash when there is no media in the DVD drive.
910 - Update the documentation and ReleaseNotes.
912 - Add FreeSpaceCommand in Device (SD configuration file) and implement it.
913 - Some modifications (again) on how guessed volume names are handled (now it should work).
914 - Part files on the hard disk are removed if they are empty.
916 - Major fixes on how guessed volume names are handled.
917 - Minor fix in src/stored/append.c.
918 - Replace, when possible, POOLMEM by POOL_MEM in the new code of src/stored/dev.c.
919 - New script, scripts/dvd-freespace, which gets the free space available on a writable DVD.
921 - Add WritePartAfterJob directive in Job resource (Director)
922 - Add WritePartAfterJob directive in Schedule Resource (Director)
923 - Implement these new directives
925 - New function, open_guess_name_dev in src/stored/dev.c, which tries to guess the volume
926 name of a mounted device, so the label can be read.
927 - New script, scripts/dvd-writepart, which write parts to DVD+/-R(W).
928 - Removed WriteFirstPartCommand directive in Device (SD configuration file).
929 - Use readdir_r instead of readdir (src/stored/dev.c:open_guess_name_dev).
931 - Add RequiresMount, MountPoint, MountCommand, UnmountCommand directives in Device (SD configuration file).
932 - Implement these directives (volumes can now be restored from a manually written DVD).
933 - Add WriteFirstPartCommand, WritePartCommand directives in Device (SD configuration file).
934 - Implement these directives (DVD writing now works).
935 - New function run_program_full_output in src/lib/bpipe.c.
936 - Lots of bugfixes and cleanups in the new code.
938 - Add VolParts field in Media table
939 - Add MaximumPartSize directive in Device (SD configuration file)
940 - File Volumes can now be splitted in multiple files ("parts")
941 - Fix SQL error in sql_list while doing "llist jobmedia"
944 - Renamed to make unique version for open_next_part()
948 - Renamed to make unique version for open_next_part()
953 - Fix the same state variable problem in open_next_part().
954 - C++ify the SD code a bit more.
956 - Add more debug code and clarify debug code for DVDs.
957 - Do not save and restore state in open_first_part()
958 since state should be properly set after open_dev().
959 - Make default mandir /usr/share/man
960 - Install Bacula man page.
961 - Implement passing of FileSet Enable VSS to FD.
962 - Move main body of reserve drive code into subroutine
963 so that it can be called multiple times.
965 - Eliminate getpass() for Win32 builds in console as the
966 function does not exist.
968 - Correct some reservation problems in SD when no devices
970 - Start removing #ifdef HAVE_TLS by sneaky tricks.
971 - Begin implementation of TLS in wx-console
972 - Remove ignoring SIGCHLD from console.
973 - Rework the dlist binary search routines for implemenation
974 of the Volume reservation code -- make it more general.
975 - Strip double slashes // from Win32 filenames in an attempt
976 to resolve restore problems on some systems.
977 - Fix a minor bugs in the trace code that caused the first
978 line output to be lost.
979 - Implement a good first cut at adding Volume reservation code
980 to the storage daemon (in file reserve.c).
981 - Remove old unused code from the tree.c routines.
985 - Fix compile problems on Win32
986 - Start writing Volume reservation list (already exists, but
987 is not really very good).
988 - Implement attribute caching to put Signature into database
989 at the same time as the file attributes thus eliminating a
990 number of database accesses.
991 - Correct a reservation problem.
992 - Implement full Dir Storage use.
993 - Reduce a bit of TLS #ifdeffing.
999 - Add more documentation to mtx-changer.in
1000 - Correct link to manual in authenticate.c in various
1002 - Create a new src/stored/reserve.c file where the
1003 Use Storage command is processed and drives are
1005 - Modify src/stored/autochanger.c to keep track of each
1006 Slot that is loaded for each device.
1007 - Ensure that changer_command and changer_name are picked
1008 up from Autochanger resource if not specified, and if
1009 neither is specified, err.
1011 - Fix bextract.c compile problem
1013 - Make make distclean clean a bit better
1015 - Remove old code in jcr.c
1016 - Make testls release jcr chain when terminating.
1018 - Implement Maximum Job Spool Size (actually DCR based)
1020 - Use light weight non-recursive locking on jcr chain.
1021 - Make JCR a class and implement inc_use_count() and
1022 dec_use_count() methods that ensure that the jcr is
1023 locked when inc/dec the use count.
1024 - Remove the global jcr lock when traversing the jcr
1026 - Use dlist to implement the jcr chain rather than hand
1027 crafted next and prev links.
1028 - Lock the jcr chain inside each function that modifies
1033 - Fix compile problem of ua_restore.c on broken compilers.
1034 - Apply patch from bug 326 to permit bacula status by any user.
1035 - Fix bug 325 -- conversion of 12:30pm to 24hour time.
1037 - Put Dmsg() on inside if() to avoid calling subroutine.
1038 - Make restore.bsr have unique name.
1039 - Allow user to define bsr filename on restore command line
1040 with bootstrap=xxx.bsr
1041 - Add limit=nnn to "list jobs" command.
1042 - Remove old restore code that did not use .bsr file.
1043 - unlink automatically generated bsr file.
1044 - Cleanup heartbeat code so that duped fd is almost sure
1045 to be released. Previously under certain conditions, the
1046 memory was not released due to race conditions.
1047 - Shorten copyright.
1049 - Unify the reserve_device() for a single device into one subroutine.
1051 - Modify wait during use_device to happen only after all devices
1052 have been examined rather than in the reserve_device code.
1053 - Correct updating count of number of Volumes in a pool.
1057 - Add more debug to SD for Autochangers + status output.
1058 - Add Scratch to PoolType in PostgreSQL make...tables and do not
1059 permit NULL PoolTypes. Fix for bug 319 reported by Eric.
1061 - Add quotes around filename in parse_config error message. Bug
1064 - Change nested \include to \input so that sections are properly
1065 included in the pdf manual -- update the Web site.
1066 - Set reconnect flag in MySQL packet to 1 to ensure that connection
1067 is re-established. MySQL 5 changed default to 0. Fixes bug report.
1068 - Fix Scratch pool handling as reported in a bug by Eric Bollengier
1069 by applying his patch.
1070 - Remove delete job in favor of delete jobid.
1071 - Add = NULL to configfile definitions as reported by Eric in a bug
1073 - Update winbacula.nsi.in to reflect new manual file structure.
1075 - Correct a minor build problem with wx-console.
1076 - Add cancel() to Dir Python scripting.
1077 - Re-correct bug in parse-config error handling.
1078 - Reorganization of use_command in SD to permit
1079 waiting and multiple drive autochanger support.
1081 - Correct bug in parse_config error handling.
1082 - Where ever possible mark a volume in error or not
1083 InChanger in mount.c
1084 - Fix bug in changing tape pools after first backup. Reported
1086 - Enhance mtx-changer to use Working Directory as temp.
1087 - Remove all but initial setup locking of Res in SD.
1089 - Add Client OS type to Job report.
1090 - Add version to manual
1091 - Update the Web site to have a single page for
1092 the documentation links.
1094 Changes to 1.37.18 release 08May05:
1096 - Correct attribute definition compile error in 1.37.17
1097 - Correct inverted order of CreateTime and MD5 pointed out
1098 by a user in a bug report in FileSet db routine causing
1099 the MD5 to print in the output instead of the time/date.
1103 - Implement cstrlen() in sql list routines.
1104 - Implement caching of attributes to add the
1105 signature so that only one DB call will be made
1106 per file. Not yet turned on.
1107 - Fix Win32 build for TLS.
1108 - Optimize File pruning to eliminate one database call.
1109 - Fix bug that prevented File pruning from working.
1110 - Implement a cstrlen() which returns the character
1111 length of a UTF-8 string.
1113 - Move test for MaxStartDelay as suggested by Peter.
1114 - Implement Python methods (I had to read the Python source
1116 - Implement run() method in Director.
1117 - Add Priority and Scheduled time to Job report.
1118 - Add JobInit and JobRun events.
1119 - Add Priority as Python read/write attribute to Job.
1120 - Correct typo in bsmtp reported by Jo.
1122 Changes to 1.37.16 (07May05): released 07May05
1124 - Implement cstrlen() in sql list routines.
1125 - Implement caching of attributes to add the
1126 signature so that only one DB call will be made
1127 per file. Not yet turned on.
1128 - Fix Win32 build for TLS.
1129 - Optimize File pruning to eliminate one database call.
1130 - Fix bug that prevented File pruning from working.
1131 - Implement a cstrlen() which returns the character
1132 length of a UTF-8 string.
1134 - Move test for MaxStartDelay as suggested by Peter.
1135 - Implement Python methods (I had to read the Python source
1137 - Implement run() method in Director.
1138 - Add Priority and Scheduled time to Job report.
1139 - Add JobInit and JobRun events.
1140 - Add Priority as Python read/write attribute to Job.
1141 - Correct typo in bsmtp reported by Jo.
1143 Changes to 1.37.16 (03May05): released 05May05
1145 - Make a few tls ifdef tweaks.
1146 - Fix create_file.c Win32 problem pointed out by
1148 - Fix really ugly bstrncpy() but found by Thorsten.
1149 - Move winapi.h/c from findlib to lib for inclusion in
1152 - Thorsten Engel finished his work on Win32 Unicode. We
1153 now have a single executable that runs on all Win32 machines.
1154 - Move job initialization code after job scheduling so that
1155 Verify jobs check for the prior JobId after they are really
1156 started rather than before.
1157 - Fix lib/fnmatch.c so that it does proper testing before folding.
1158 - More documentation -- at tls and ansi labels chapters.
1159 - Fix fileset_convert.pl to handle empty Exclude statements.
1160 - Turn regex back off in Win32
1162 - Fix sign extension problem in lex.c that reads UTF-8
1163 with Chinese characters incorrectly.
1167 - Remove a few HAVE_TLS #ifdefs
1168 - Implement final Python style interface. More implemention to
1169 be done, but the interface should change little if at all.
1171 - Make default no tls support. You must add
1172 --with-openssl to get tls support.
1174 - Update Web header to include google search in the search
1175 box -- thanks to input from Michel Meyers.
1176 - Fix md5sum so that it builds with the new openssl stuff.
1177 - Take some enhancements to the md5sum test program proposed
1180 - Apply Tru64 patch supplied by Pascal Pederiva <freebsd@paped.com>
1181 - Apply Unicode fixes for Win32 from "Thorsten Engel"
1182 <thorsten.engel@matrix-computer.com>
1183 - More work on Python read feature in FD.
1185 - Fix (hopefully) the ftello() overflow reported by Peter.
1186 - Landon Fuller committed his TLS patch.
1187 - Fixed two minor warnings in console.c with TLS turned off.
1188 - Updated the Makefile.in for wx-windows and tray-monitor
1189 to handle TLS. I can only build the tray-monitor.
1190 - Fix bscan to open tape in read-only mode (actually fix
1191 it so that it doesn't use the standard open routine).
1192 - Correct what appears to be an error in setting the
1193 return value in dvd.c
1195 - Get FD Python running -- design Python backup interface.
1196 - Fix seg fault in SD when referencing Alert Command.
1197 - More documentation.
1198 - Fix one more thing in Win32 build.
1202 - Put in production here
1206 - Fix SQLite and PostgreSQL table creation script syntax
1208 - Fix new Python code to work for Director.
1209 - Move lib/python.c to lib/pythonlib.c so that debug output
1210 is easier to read (can distinguish lib from dird, ...).
1211 - Cleanup Python build so that Python is not dragged
1212 into programs that don't use it.
1216 - Reset NumVols in Pool record from database on every update
1218 - Modify DB to support multiple simultaneous copies and
1220 - Pass copy and stripe between DIR and SD and put into
1221 the JobMedia DB record.
1222 - Update and test SQLite and MySQL datebase creation and
1224 - Implement version 9 of the DB.
1226 - Convert more atoi to str_to_int64() for DB.
1227 - Implement filling in NumVols by querying DB rather
1228 than trying to keep track of it.
1229 - Add storage name to string passed to in use storage=
1230 - Fix newVolume() so that the Python script is always
1232 - Fix handling of pool,PoolId, and storage in ua_output.
1233 - Same fix in ua_status.c
1234 - Remove required locking of resources
1235 - Replace pthread_cond_signal() by pthread_cond_broadcast()
1236 hoping to fix the /lib/tls hang problems (lost signal).
1237 - Move resource locking seaching from parse_conf.c to res.c
1239 - Modify end of volume handling so that fixup_... does not
1240 redo what block.c has already done -- writing Vol info to
1241 DIR. This fixes a bug with bad numbers of files on a tape
1242 when it filled as reported by Peter.
1243 - In release_device() do not update the DIR on the Volume
1244 info if the the information was already written at the
1247 - NOTE!!!! This version has a new DIR <--> SD protocol. Both
1248 must be updated at the same time.
1249 - Begin implementation of passing all the Storage and Device
1250 possibilities to the SD for examination during the reserve
1252 - Modify the reserve and acquire code in the SD to make a
1253 job wait if the device is not available.
1254 - Implement New Volume Each Job in DIR and pass to SD, not yet
1256 - Remove init/update of the Device resource in DIR
1257 - Remove passing PoolId to SD and back.
1259 - Remove \a and -e from error echos in most Makefiles.
1260 - Add more debug code when there are errors on the tape
1261 to try to find Peter's tape problem.
1262 - Add wait.c (oops forgot previously).
1263 - Move all the reserve/acquire_device_for_read/append to have
1264 only a DCR as the argument.
1265 - Rework the reserve_device_for_append() in stored to wait
1266 if the drive is not available. Note! This is a short
1269 - Comment out Multiple Connections in the document.
1270 - Move the P() and V() to subroutines so that they can be accessed
1271 from class methods. The reference to strerror() caused problems.
1272 - Implement new DEVICE class methods block() and unblock() that
1273 do what was previously done in 3 lines of code.
1274 - Implement wait_for_device(), which will wait for any device
1275 to be released then return. This requires a new global mutex
1276 and condition variable, and is implemented in src/stored/wait.c
1277 - Change the code in reserve_device_for_read(), which previously
1278 failed the job to use the new device wait code.
1280 - Apply reschedule patch to 1.37 code.
1281 - Add copyright to title page of manual so it is clear.
1282 - Create patch for rescheduling problem found by Ludovic. Storage
1283 pointers were lost during rescheduling.
1284 - Attempt to fix 2.6 rescue disk -- failed!
1285 - Start working on adding a wait routine in the SD.
1286 - Cleanup some old invalid doc in watchdog.
1287 - Convert a number of references to dev->dev_name to dev->print_name().
1288 - Add new wait.c file to SD.
1289 - Add a few more methods to DEVICE in SD to cleanup code a
1290 bit -- implement a few of the methods.
1292 - Fix more print_name()s for printing device name.
1293 - Modify open_dev to try 10 times every 6 seconds to
1294 open the device if it gets an I/O error (meaning no
1295 volume mounted). This gives a bit of settling in time
1296 for an autochanger and avoids spurious messages.
1297 - Change all yes/no to yes|no in the manual.
1298 - Fix win32 create_file.c typo.
1299 - Fix a typo in an error message.
1301 - Detect if fseeko exists with autoconf. If so, use it
1303 - Remove old bacula-*.conf from examples directory (out
1305 - Remove latex-fr index files from CVS.
1306 - Rewrite code that stops reading the tape so that the
1307 tape is marked at EOT, then once the work is done,
1308 the EOT flag is removed.
1309 - Flush output to file after every send in console.
1310 - Make setting VolFiles to smaller number fatal.
1311 - Disable Multiple Connections code.
1312 - Add patch from user for NetBSD statvsfs() fix to
1314 - Take more care with errors in acquire.c
1315 - Don't run through dvd code in append.c if bad status
1317 - Modify code so that an autochanger fault is fatal.
1318 - Use dev->print_name() in more places.
1319 - Implement dev->can_steal_lock() to simplify code.
1320 - Make btape re-read first 10000 records on fill command.
1321 - Check error return and fail job from fseeko and ftello
1322 in spool.c. Don't let a -1 slip in as size.
1326 - Apply NetBSD patch from kardel in bug 258.
1328 - Add a second job and a second client to the default
1329 bacula-dir.conf file.
1330 - Remove old style Include/Excludes.
1331 - Fix ANSI labels to put EOF1 and EOF2 after each file mark.
1332 - Add Python to SD and FD.
1334 - Implement IBM labels
1335 - Implement EOF and EOV labels at the end of a volume.
1336 - Fix a rather ugly problem with the PoolId not getting
1337 passed correctly. Now the DIR passes the Pool name and
1338 Media Type to the SD, who passes them back when requesting
1339 the next Volume. The DIR then looks up the correct PoolId.
1340 This takes more time, but always works, AND allows wild
1341 card Media Types (i.e. the SD can decide).
1342 - The DIR <==> SD protocol has changed.
1346 - Fix scanf of PoolId in catreq to handle 64 bit Ids.
1348 - Add new ua_update.c file and move update_cmd there.
1349 - Modify "update slots" to obtain actual number of slots.
1350 - Tweak autochanger code to handle new slots request.
1351 - Modify autochanger code to lock/unlock around slots and
1354 - Patch the FD so that it does not issue an error message if
1355 it attempts to restore the permissions on a Win32 drive.
1356 - Edit "Resource-name" (physical-name) for the device name
1357 everywhere in the SD.
1358 - Remove .linked.tex files in preparation for cutover to
1359 using .tex in place of .wml.
1361 - Copy latest config.sub and config.guess from autoconf.
1362 - Try new way of identifying drives with:
1363 "resource-name" (physical-name)
1364 More work need to a complete conversion.
1366 - Rework some of the autochanger data so that the DIR has
1367 the number of drives.
1368 - Modify the way the Device info is returned so that it comes
1369 back as a special message type and can be sent anytime the
1370 Device status changes.
1371 - Copy the change name and changer command into the device
1372 record if none is specified.
1373 - Require the change command and changer name to be specified in
1374 and AutoChanger resource.
1375 - Force all the Media Type records of all devices in an Autochanger
1378 - Add new "run" command to Job resource in DIR. This permits
1379 cloning a job as many times as you want.
1380 - Pass PoolId to SD on Query request. It is now used in the
1381 Find_media catalog request.
1382 - Reworked the Device resource in the DIR. Eliminated num_waiting
1383 and use_count, but added max_writers, reserved, and PoolId.
1384 - This DIR is nolonger compatible with previous SDs.
1385 - Add since and cloned keywords to the Console run command
1387 - Implemented store_alist_str() to allow multiple string items
1388 to be specified in a .conf file.
1389 - Added %s (since time) to Job code editing.
1390 - Reworked reserving drives in the SD. It now does it much simpler
1393 - Integrate HP-UX patch from Olivier Mehani <olivier.mehani@linbox.com>
1394 - Fix FD job.c to test correctly for no level.
1398 - Change Developers to Developer's Guide as requested by Michael.
1399 - Fix developers link in manual
1400 - Add additional dcr changes in SD to allow multiple dcrs.
1402 - Fix a few problems with the MySQL table create in 1.37.
1403 - Delete the new tables in the table delete files.
1404 - Increase the number of items permitted in a conf table.
1405 - Make Director loop over alternative Devices specified in the
1406 Storage resource until one is reserved by SD.
1407 - Fix storing of StorageId in Media records.
1408 - Add AutoSelect = yes|no in bacula-sd.conf
1409 - Add Autochanger support to Label command.
1410 - Do not autoselect devices with autoselect set false
1412 - Implement setting DIR Storage device to Autochanger
1414 - Select first available device in Autochanger.
1415 - Pass back actual device name used.
1416 - Allow Query of AutoChanger.
1417 - Modify Query to include name of AutoChanger if
1418 Device belongs to one.
1419 - Remove old Pool code in jobq.c
1420 - Add Autoselect flag to query and DEVICE class (still
1423 - Lock autochanger script when running.
1424 - Mark Volume not InChanger if correct volume is not
1426 - Corrected some typos in the make_xxx_tables.in files.
1427 - Made preliminary split of pre-run and run code for each
1428 job type. This will permit early opening of SD for reserving
1430 - Add offline and autochanger fields to Device Query record.
1431 - Correct pthread_mutex_init() for autochanger in SD.
1432 - Tweak Makefile for LaTeX manual, plus add nav buttons.
1434 - Clean up drive reservation system. Add more sanity checks.
1435 - Implement a few more methods for the DEVICE class in SD.
1436 - Add latex directories to make clean
1437 - move DEV_BSIZE to B_DEV_BSIZE to avoid conflicts with
1438 certain header files (FreeBSD).
1440 - Fix an ASSERT that was triggering in stored/acquire.c
1441 attempt to fix a bug report.
1443 - Corrected SunOs to SunOS in btraceback (user submitted).
1444 - Applied patch from Roger Haa¥kansson <hson@ludd.luth.se>
1445 to warn the user of defective AWKs during ./configure.
1447 - Add some changes submitted by a user for HP client build.
1448 Not all changes accepted.
1449 - Rework code in filed/backup.c to ease #ifdefing and make
1450 program flow more obvious.
1451 - Split DVD code out of dev.c into dvd.c
1452 - Tweak #ifdefing to add back all the performance measurement
1453 #defines in version.h
1454 - Put most of MTIOCGET code in a subroutine to simplify the
1456 - Make clean remove old CVS files
1457 - Remove unnecessary image files from Latex directory
1458 - Implement remaining parts of Storage DB record and
1459 its use in the Director.
1461 FullMaxWaitTime, Differential Max Wait Time, and
1462 Incremental Max Wait time in Job resource.
1463 - Start work on SD Autochanger code.
1465 - Add back JobId index for MySQL as default -- speeds up
1467 - Add more database fields and fix the update scripts to
1468 include the new items.
1469 - Pass actual level to FD so that ClientRun editing can reflect
1470 correct level -- ditto for job status. This makes the DIR
1471 incompatible with older clients!
1472 - Move jobq.c acquire resources to static subroutine so that
1473 the code logic becomes clearer. This is in preparation for
1474 actually using the new Device resources.
1475 - Fix some lower case problems in sql_cmds.c reported by
1477 - Correct a seg fault in the SD reported by a user. Occurred
1478 only when a high debug level was set.
1479 - Modify init_dev() in dev.c to take JCR as first arg so that
1480 proper error messages can be reported in next item.
1481 - Modify the query and use device SD commands to attempt to
1482 open the device if it could not previously be opened.
1483 - Correct error message for Could not reserve device.
1484 - Correct some minor details with Autochanger resource in SD.
1486 - Fix seg fault if debug level 900 set in SD.
1487 - Truncate Win32 child return code to 8 bits.
1488 - Remove some old lld's.
1492 - Make another attempt at fixing the ClientRunXXX return code
1493 bug on Win32 machines.
1494 - Apply ua_status patch from Carsten Paeth <calle@calle.in-berlin.de>
1495 which enforces console ACLs in the status command for Jobs.
1497 - Fix Media LabelDate and FirstWritten to be correctly set.
1498 - Fix deadlock in multiple simultaneous jobs.
1499 - Fix tape "truncation"/"number of files" after restore bug.
1501 - Ensure that correct error messages are returned when
1502 reading an ANSI label.
1504 - Modified ANSI label code to preserve any ANSI label
1505 already found by skipping over it rather than rewriting
1507 - Split the ANSI label code into ansi_label.c
1508 - Do not let user relabel an ANSI labeled tape.
1509 - Applied a patch for the console help command supplied
1511 - Added some new dev methods. Most notably was
1512 set_eof(), which handles setting all the dev variables
1513 when an EOF is just read. This is now used most everywhere
1516 - Added code to detect that no files were inserted into the
1517 tree for a restore. If a specific JobId was specified, the
1518 user has the option of restoring everything.
1519 - More progress in implementing 64 bit DB Ids.
1520 - Modified the daemon start messages for RH.
1521 - Implement update scripts for all database types.
1522 - First cut at implementing restore directory (it will not
1525 - OK, I think ANSI labels work.
1526 - Added Label Type = ANSI|IBM|Bacula to Device resource in SD.
1527 If this is set, it will force writing of the appropriate
1529 - Added Check Labels = yes|no to Device resource in SD. If this
1530 is set, Bacula will check for ANSI labels and accept them,
1531 otherwise, ANSI labels will not be accepted when the tape
1534 - Second cut ANSI labels.
1536 - Merge Preben's patch for ACLs and for Mac OS X resource forks.
1538 - Display more informative message when a device was not
1539 found or could not be opened.
1540 - Add the sqlite3 database scripts.
1541 - Add some patches for 1.36.1 (note, I have now prepared
1542 a 1.36.2 with all the patches and some new features --
1544 - Some minor doc updates.
1545 - Add Arno's baculareport.pl script to the examples directory.
1546 29Jan05 -- after vacation
1547 - Add support for SQLite3 (it seems to run at 1/2 the speed
1548 of SQLite2). Use --with-sqlite3 instead of --with-sqlite
1550 - Add target for running qemu to boot Rescue CDROM
1551 - Add code to support kernel 2.6 in Rescue CDROM -- does NOT yet
1553 - Implement ANSI labels -- not yet tested.
1554 This required changes to DB format. No upgrade script yet.
1555 Note, more work needed to modify "update" command to handle
1556 changing label types, also must restrict volume name lengths
1558 - Add new Device, Storage, and MediaType records to DB. No
1560 - Add MediaType to bsr file record types. Not yet used in SD.
1561 - Permit multiple device specifications in Storage resource in
1563 - Implement Device resources. Director requests Device resource
1564 info from SD on startup.
1565 - Note!!!! DIR->SD incompatible with previous versions.
1566 - Remove multiple Storage definitions in Job resource. One can
1567 still specify multiple Storage resources, but they all go into
1568 a single alist, and imply sending data to each Storage daemon
1570 - Implement Device query command between DIR and SD.
1571 - Allow DIR to "reserve" a Device. It will then be acquired
1572 when the FD connects to the SD.
1573 - Turn all DIR resources into classes, and implement a few class
1574 methods -- more to come.
1575 - Turn DEVICE in SD into a class, and implement a number of inline
1576 class methods -- more to come.
1577 - I had serious problems with ACL errors on my Laptop, and so had
1578 to add the following patch:
1581 /***** Do we really want to silently ignore errors from acl_get_file
1582 and acl_to_text? *****/
1586 - Added edit_int64()
1587 - Reworked and tested a bit the htable routines.
1588 - Major changes to SD acquire.c -- DIR can now reserve devices. Needs
1590 - Made a special state code for DVD -- this simplifies the logic
1591 of the code, but I probably broke it. Testing needed!!!!
1592 - Add AutoChanger resource to SD, but not yet used.
1596 - Integrate Preben 'Peppe' Guldberg <peppe@wielders.org>'s
1597 acl patch. Fix case where configured but no ACL exists.
1598 Rework calling arguments to be shorter and positioned
1599 more typically in Bacula usage.
1601 - Fix scripts/bacula.in to have awk on an environment variable
1602 and add comments for Solaris users.
1603 - Turn off inet_aton in src/lib/address_conf.c for Win32
1604 - Add new files to win32 build and eliminate a compiler warning.
1605 - Add sample DVD Device resource to bacula-sd.conf
1607 - Integrate Nicolas' patch for direct DVD support.
1609 - Fix fstype error returns.
1610 - Apply Preben's cleanup.patch which puts back much of the
1611 cleanup code in src/filed/restore.c
1613 - Apply all of Preben's patches, but revert to old backup.c
1614 and old restore.c in filed. Also turn off code in new
1615 acl.c because of errors. The new code, when fully implemented
1616 moves platform specific code into acl.c.
1617 One of the patches also implements WildFile and WildDir -- thanks.
1619 - Implement Python in the SD (no events yet though).
1620 - Fix some typos in the previous commit.
1622 - Enhance CDROM boot to include some documentation at boot time.
1623 - NOTE!!!!! The CDROM will not boot 2.6 kernels because the
1624 boot sequence has changed significantly. Updates to come
1626 - Add memtest option to CDROM boot.
1627 - Include Nicolas' changes to fix llist JobMedia records.
1628 - Make sure that ClientRunBefore/After messages from the program
1629 are terminated with a newline. Add strerror to output error
1631 - Return program exit status code in Win32.
1633 - Add memtest86 to Bacula Rescue disk
1634 - Enhance Rescue disk startup screen
1636 - Move some variables to eliminate Solaris 2.6 compiler warnings.
1637 - Fix the seg fault at the end of a job in the FD when using
1638 old style include/excludes.
1640 - Apply Preben's ACL patch.
1641 - Integrate Preben's restore patch.
1642 - Integrate Preben's verify teaks.
1643 - Fix doc/latex/Makefile to copy/remove .eps files when building
1644 html and web outputs.
1646 - Fix Bacula so that it does not exit if there is a syntax error
1647 in its conf file during a reload command. Bug 182.
1648 - Apply fixes suggested for old Solaris networking.
1650 - Apply Preben 'Peppe' Guldberg <peppe@wielders.org>
1651 three patches that clean up white space:
1652 ws.patch.02.strings:
1653 Breaks strings that span lines into concatenated strings. I am not sure
1654 if you like this one. Other code works with concatenated strings, though.
1655 ws.patch.03.trailing:
1656 This removes trailing whitespace. No changes resulted from this for
1658 ws.patch.04.leading:
1659 This replaces space runs at the start of line with tabs. No changes
1661 - Fix overriding storage specification to be done
1662 through a subroutine.
1663 - Fix autoconf so it runs with FC3.
1664 - Add Python4.3 to configure search paths.
1665 - Always copy and delete storage definitions into jcr.
1666 - Check that VolumeName supplied by Python is valid.
1669 - Fix undefined in non-Python build.
1670 - Update rescue disk to include mkinitrd
1671 - Fix umount_drives in rescue disk (only one arg to umount)
1672 - Ensure that if SD is manually set in Console, it is used.
1673 - Put generate_event on pointer and plug it in init. This
1674 permits using it in /lib
1675 - Correct despooling size reported to be Job specific rather
1676 than for the whole drive.
1678 - Fix bug 207. jcr use count off by one when manually
1680 - Remove FNMATCH test in configure.in and always use
1681 the one in our library to get the FN_CASEFOLD GNU
1682 extensions on all platforms.
1683 - While using the rescue CDROM after my computer would not
1684 boot, I realized that it would be very useful to have
1685 a umount_disks. So, it is not implemented, along with
1686 updates to the READMEs and some minor tweaks.
1687 - Moved mounting the CDROM in the rescue boot from /cdrom
1688 to /mnt/cdrom (more standard location).
1689 - Reboot in CDROM rescue should now work -- requires -d
1690 option (no write) to work.
1691 - Hopefully fixed all the IPV6/4 problems and buffer
1692 problems with networking in lib. Bugs 190 and 204.
1693 Cleaned up a lot of #ifdefing problems by using routines
1696 - Apply Preben 'Peppe' Guldberg <peppe@wielders.org>
1698 - Remove duplicate code from chksum.h (mentioned by Preben).
1700 - Integrate Tim Oberfoell <oberfoell@web.de> patch to ACLs
1701 to handle both the "standard" and "default" ACLs.
1703 - Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
1704 three cleanup patches (btest, verify, find).
1705 - Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
1706 three cleanup patches (backup, chksum, and verify)
1708 - Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
1709 patch to avoid doing MTIOCGET on OSes that do not support
1711 - Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
1712 patch to add filesystem type matching to FileSets in the
1714 - Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
1715 patch to add Mac OSX resource fork support (save/restore)
1716 to Bacula -- HFS Plus support.
1717 - Add FileSet to client Job listing query.
1719 - Integrated Preben 'Peppe' Guldberg <peppe@wielders.org>
1720 patch to backup directories skipped (due to no file system
1721 changes or no recursion), and to add a slash to the end
1722 of the directory name during the match process.
1723 - Implement Jamie ffolliott <jamieff@inline.net>
1724 patch to dird_conf.c that enables Multiple Connections and
1725 fixes a typo in show. The rest of his patch awaits my suggested
1728 - Implement run command in Python
1730 - Implement conversion of the manual, and some minor
1731 tweaks to the script tags.
1732 - Apply a patch supplied by Preben 'Peppe' Guldberg that implements
1733 ignore case in wild cards and regexes.
1734 - Fix a truncated line in the above patch due to my cut and paste.
1736 - Fix it so that the InChanger flag is only changed for Volumes
1738 - Add PIDOF configuration path and apply to bacula.in
1739 - Add user supplied patch to add inet_aton() of old Solaris
1741 - Require pools to match before allowing multiple simultaneous
1742 accesses to same storage resource.
1743 - Add patch supplied by Martin to correct buffer overrun in
1744 bsnprintf() with no library snprintf().
1746 - Apply user supplied patch that implements No Hard Links.
1747 - Document Python interface
1748 - Add hardlink keyword patch supplied by David R Bosso <dbosso@lsit.ucsb.edu>
1750 - Fix non-python prototypes in dummy routines.
1751 - Add python 2.3 to config search list (user submitted patch)
1752 - Add JobStatus to Python variables.
1754 - Add "python restart" command in Console.
1755 - Make built-in variables table driven.
1756 - First cut of Python Events for Bacula. Director only.
1757 StartJob, EndJob, NewVolume events.
1760 Technical notes on version 1.37
1767 - dvd.c: update VolParts when writing the last part.
1769 - configure: add check for dd, remove check for df
1770 - block.c:do_dvd_size_checks: Check we are writing to a dvd before doing tests
1771 (reported by David Raine on the list, "[Bacula-users] LTO drive - End Of Volume error").
1772 - Update bacula-sd.conf.in to use dvd-handler correctly.
1773 - dvd.c:dvd_write_part: Increase timeout when writing the first part (see the code for
1776 - Modify .backups command to get a fileset parameter (fix bug #444).
1778 - Fix bug when recycling DVD devices (append flag was removed).
1779 - Add tests for dvd+rw-format in configure script.
1780 - scripts/dvd-handler: Reformat DVD-RW when needed. This needs dvd+rw-format.
1781 - Add patch for dvd+rw-tools in patches dir (this should probably be elsewhere).
1783 - Remove scripts/dvd-freespace and scripts/dvd-writepart, as they are now
1784 merged into scripts/dvd-handler. Note: Documentation needs to be updated.
1785 - scripts/dvd-handler: "zero" brand-new DVD+/-RW to fix a problem with some
1786 DVD-writers, thanks to Arno Lehmann for reporting this, and providing the
1788 - new scripts/dvd-handler. Note: it also needs a patched version of dvd+rw-tools.
1789 - new scripts/dvd-freespace. Note: it needs a patched version of dvd+rw-tools.
1790 - dvd.c:dvd_write_part: Don't write empty part. (Fix 4GB crossing bug reported by Arno Lehmann)
1792 - dvd.c:dvd_write_part: Use part_size and not max_part_size when setting write timeout.
1793 - dvd.c:do_mount_dev: When checking if the DVD is mounted, do not count ., .. and .keep (needed on Gentoo).
1795 - Convert dvd-writepart to Python.
1796 - Increase delay from 3 seconds to 5 seconds between SIGTERM and SIGKILL when
1797 killing external programs.
1799 - Add gettext macros in autoconf/gettext-macros.
1800 - Modify how localedir is set in configure.in.
1801 - Remove setlocale check (useless).
1803 - Mark translatable strings in all source files.
1805 - Create French and Italian translation files (fr.po, it.po).
1806 - Add support for translation in configure and Makefiles.
1807 - Update autoconf/aclocal.m4 so it is automatically created with aclocal
1808 (Note: autoconf/gnome-macros is not used anymore, it may be removed).
1810 - Fix src/lib/bpipe.c:run_program and run_program_full_output to detect if the watchdog
1811 killed the program, and return an error if it is the case.
1813 - Modify parse_config to get a LEX_ERROR_HANDLER as a parameter
1814 - lex_open_file now returns NULL if the file can't be opened. All calling functions have
1816 - Remove set_exit_on_error function
1818 - Fix "unknown device type" problem with DVD devices.
1819 - Fix crash when there is no media in the DVD drive.
1821 - Update the documentation and ReleaseNotes.
1823 - Add FreeSpaceCommand in Device (SD configuration file) and implement it.
1824 - Some modifications (again) on how guessed volume names are handled (now it should work).
1825 - Part files on the hard disk are removed if they are empty.
1827 - Major fixes on how guessed volume names are handled.
1828 - Minor fix in src/stored/append.c.
1829 - Replace, when possible, POOLMEM by POOL_MEM in the new code of src/stored/dev.c.
1830 - New script, scripts/dvd-freespace, which gets the free space available on a writable DVD.
1832 - Add WritePartAfterJob directive in Job resource (Director)
1833 - Add WritePartAfterJob directive in Schedule Resource (Director)
1834 - Implement these new directives
1836 - New function, open_guess_name_dev in src/stored/dev.c, which tries to guess the volume
1837 name of a mounted device, so the label can be read.
1838 - New script, scripts/dvd-writepart, which write parts to DVD+/-R(W).
1839 - Removed WriteFirstPartCommand directive in Device (SD configuration file).
1840 - Use readdir_r instead of readdir (src/stored/dev.c:open_guess_name_dev).
1842 - Add RequiresMount, MountPoint, MountCommand, UnmountCommand directives in Device (SD configuration file).
1843 - Implement these directives (volumes can now be restored from a manually written DVD).
1844 - Add WriteFirstPartCommand, WritePartCommand directives in Device (SD configuration file).
1845 - Implement these directives (DVD writing now works).
1846 - New function run_program_full_output in src/lib/bpipe.c.
1847 - Lots of bugfixes and cleanups in the new code.
1849 - Add VolParts field in Media table
1850 - Add MaximumPartSize directive in Device (SD configuration file)
1851 - File Volumes can now be splitted in multiple files ("parts")
1852 - Fix SQL error in sql_list while doing "llist jobmedia"