1 Technical notes on version 2.2.x
4 Beta Release Version 2.2.10-b2
6 kes Rework SD acquire for read to handle autochanger Volume
8 kes Implement regression that explicitly tests swapping a Volume
9 from one drive to another.
10 kes Enhance disk-changer to detect most error conditions.
11 kes Fix SD code so that it properly swaps a Volume between drives.
14 kes Prevent a Volume that is being swapped from being freed from
15 the volume list. This will most likely fix, at least partially,
17 kes Fix strippath so that it does not get a buffer overrun and crash FD.
19 kes Make inability to change owner/group when creating a dir only a
20 warning rather than an error.
22 ebl Fix SQL query in migration code
24 kes Force unload of volume when wrong volume mounted in SD.
26 kes Fix bat seg fault at termination.
27 kes Add Bacula generated version to bat about box.
30 Beta Release Version 2.2.10-b1
32 kes Permit multiple simultaneous restores -- experiment.
34 kes Backport development stream SD reservation system changes.
38 kes Move final volume swapping code to DCR method and
39 call it from acquire_for_read().
40 kes When wrong volume is mounted during read, unload_autochanger.
42 kes Stop searching for Volumes in SD askdir if DIR returns the
43 same volume name twice in a row.
45 kes Tweak the swap Volume from one drive to another code so that
47 kes Resolve several problems with recycling that broke the new
48 code (these problems are in 2.2.9 as well).
49 kes Remove the volume lock when calling the sysop code.
50 kes Don't mark a reserved volume with no writers as unused otherwise
53 kes Rework class structures for VOLRES, DCR, and DEVICE to make
54 the method names a bit more logical, and for more logically
55 handling the responsibilities.
57 kes Remove redundant code in terminating the scheduler that just
58 causes a seg fault in many cases.
59 kes Cleanup releasing a volume and make it a DCR method.
60 kes Improve algorithm for detecting pre-reserved volume and
63 kes Tweak volume swapping code so it works.
64 kes Correct name overloading in mount.c
65 kes Replace released flag in VOLRES with reserved and add access
66 methods for the VOLRES class.
67 kes Prevent volume from being released while being swapped.
68 kes Refactor parts of stored/mount.c
70 ebl Add sanity checks for VolWriteTime and VolReadTime
71 ebl Take care of bad clock changes while computing VolWriteTime
72 and VolReadTime. This should fix or limit #1066
73 kes Correct error string numbers in dird/catreq.c
74 kes Restructure reserving, acquiring, and mounting volumes. Calls to
75 autochanger are deferred for mount.c -- simplifes the code.
77 kes Do not prune any running job. It just fails the job.
78 kes Lock the volumes when changing dev->reserved_device and marking
79 the volume unused otherwise the device can get reserved by
80 another job before the volume is released, thus blocking it.
83 Beta Release Version 2.2.9-b7
85 kes Close bat console windows first to eliminate error message
87 kes Remove useless code in Scheduler that causes seg fault on
89 kes Correct some SD catalog request error messages.
90 kes Don't allow pruning of any running job.
91 kes Turn off code in read_record that causes a seg fault in the SD
92 when reading past an EOS_LABEL.
93 kes Turn off unloading the autochanger in reserve.c as it just
95 kes Lock volumes when unreserving a device.
96 kes Do not mark volume unused when recycling.
97 kes When acquiring, don't mark volume unused if it is reserved (busy).
99 Beta Release Version 2.2.9-b6
101 kes Eliminate ./configure warning on po directory
102 kes Fix bug #1063, reuse of freed ptr in list nextvol.
103 kes Release regex compile buffer in filed/job.c
104 kes Add proper type of const char in sql_create.c
105 kes Turn off debug in daemon termination routines
106 kes Move free_volume_list() before devices are freed in stored.c
107 kes Fix reference to uninitalized stack variables in bregex.c.
108 This should correct bug #1067.
110 kes Fix possible seg fault in SD when freeing a volume entry.
112 kes Apply patch from bug #1069 that corrects spurious error messages
113 when ACLs enabled on SGI but no ACL exists.
114 ebl Fix a storage deamon segfault at debug level 500.
116 Beta Release Version 2.2.9-b5 -- not released
118 Beta Release Version 2.2.9-b4
120 kes Re-enable code to remember last volume mounted on a non-tape
122 kes Add patch supplied in bug #1068 that fixes a SD crash when using
123 a Virtual autochanger.
124 kes Generate correct JobMedia records during spooling/despooling when
125 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
126 <tih@hamartun.priv.no> for excellent analysis and testing.
128 Beta releae version 2.2.9-b3
130 kes Rework certain SD locking based on gdb tracebacks of deadlocks
131 sent by Eric. This code now uses only the volume_lock() rather
132 than the reservations lock when at EOM and acquiring a new
134 kes Ensure only one exit point in several subroutines.
136 Beta release version 2.2.9-b2
138 kes Fix to initial tape drive open to release the volume name
140 Beta Release Version 2.2.9-b1
142 kes Fix to JobMedia fix.
143 kes Fix bug pointed out by Peter Much that causes the StorageId to
144 be updated when reading a tape (during migration, it could have
145 been incorrectly set to the write StorageId).
147 kes Implement autostart scripts for Debian
149 kes Fix mtx-changer.in for broken Debian mt program.
151 kes Massive commit of all fixes and back ports to create 2.2.9
153 kes Apply doc fix from bug #1062.
154 kes Resolve crash and improper restore wx-console Win32 restore
155 GUI. Fixes bug #1065.
156 kes Update Win32 wxWidgets to latest version.
157 kes Attempt to do correct handling of Win32 mount points. Should
159 kes Fix Win32 FD backup/restore memory leak due to improper termination
160 of BackupRead/Write. This fixes bug# 1038.
161 kes Add const to AIX prototype for initgroups()
163 kes Undo bug #1047 heap overrun fix as it is not correct.
165 kes Fix creating first JobMedia record during Migration to include
166 proper index. This caused slow restores of migrated jobs.
168 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
169 and do not strip paths on symbolic links.
170 kes Set catalog backup database and user name from values specified on
171 the ./configure line.
172 ebl Apply patch to correct bug #1031, about wrong pool source information
175 Release Version 2.2.8
177 kes Apply patch from Martin to correct bug #1040, bscan sets existing
179 kes Fixed important spelling error in doc -- bug #1045.
181 kes Move initialization of read/write res lock earlier in the code.
182 This fixes the crash with a null conf file. This fixes bug
184 kes Redefine CURES in lib/parse_conf to be URES and move it all
185 into lib/parse_conf.c -- this responds to bug #1042, but does
186 not fix it. The fix is not to compile with FORTIFY_SOURCE.
187 kes Backport fix de-referencing a NULL pointer in the scanner from
188 the trunk SVN. I don't think this was reported as a bug.
190 Beta release Version 2.2.8
192 kes Re-enable the new job code editing (%f).
194 kes Fix bsnprintf for float point numbers. I broke recently when
195 parameterizing some variables.
197 kes Move Heartbeat documentation from Job to Director resource.
198 This fixes bug #1033.
200 kes Fix existing switch drive SD code to call autochanger to release
201 any old volume. This must be done to keep the autochanger from
202 releasing subsequently newly reserved volumes in doing a close().
203 This should possibly fix bugs #1032 and #1018.
204 kes Apply big backport of current SVN SD code that corrects a number
205 of race conditions. This is a first step in fixing bug #1018.
207 ebl Fixes bug #1028 where "Selection Type" option was not usable
211 Release Version 2.2.7
213 kes Partial back out (disabled) %f job code editing because it
214 does not build on Win32.
215 kes Fix seg fault Frank Sweetser reports in regression testing
216 on his systems. The problem was that the original author of
217 bsnprintf.c did not take into account the side effects of
218 using ++x in the argument to a #define.
220 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
221 that implements double quoting include names in conf files,
222 and also allows piping input by having the first character
223 be a vertical bar (|).
224 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
225 that implement %f in RunScripts to pass the FileSet name.
226 kes Skip leading | when lex input comes from a pipe as suggested
227 by Michael Stapelberg <michael@stapelberg.de>.
229 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
230 Nerijus Baliunas <nerijus@users.sourceforge.net>
232 kes This patch corrects a problem where the maximum concurrent storage
233 jobs counter gets out of sync during restore jobs causing jobs to
234 'wait on max Storage jobs'. This patch fixes bug #1009.
236 kes Add new include to postgresql.c suggested by Marc Cousins so
237 that it compiles correctly with pgre version 8.3. Also fix
238 misuse of %x with pointer (should be %p).
240 kes This patch fixes bcopy so that it produces correct Volumes.
242 kes This patch eliminates spurious output to the console during a VerifyVolume
243 job that contains encrypted data. It fixes bug #1024.
245 kes This patch prevents the 'status dir' command from trying to use a scratch
246 volume and possibly moving it from one pool to another. This patch fixes
249 kes Fix --archivedir addition to configure. Replace it with
250 --with-archivedir in configure.in This fixes the regression
252 kes This patch fixes bug #1012 where the job is canceled because
253 of Max Run Time exceeded when the job has not yet started.
255 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
256 one 'part' to write. Instead of each part being stored on disk,
257 written to DVD, then deleted from disk, all parts are written to disk,
258 and only the last is written and deleted from disk.
260 kes Correct typos in disk-changer.in
262 kes This patch fixes the status command to include the formating string for
263 JS_AttrInserting. It fixes bug #1021.
264 kes This patch should fix the Mac OS X build problem on the latest
265 Darwin, where sys/types.h was not included correctly (apparently
266 due to a change in the Mac headers). The solution was to explicitly
267 ensure that it is defined for the ./configure.
268 This patch also has a rebuild of configure that includes the Debian
269 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
270 kes This patch should ensure that queued messages to the console are
271 displayed as soon as possible. It should fix bug #1007, but has been
272 reported not to work.
274 kes This patch fixes the infinite loop when trying to increase the
275 maximum number of volumes in a Pool during the add command.
276 This patch fixes bug #1008.
278 Release Version 2.2.6
280 kes Get fix for joblist bug in bat from trunk.
282 kes This patch fixes bug #1003 where putting the message output from
283 a Verify job into the catalog results in a recursive loop. The problem
284 seems to show up only with postgresql (to be verified).
286 kes Fix bug #942 where lots of emails where generated when the heartbeat
287 interval was low and Bacula wanted a different tape from the one in
290 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
291 which was updated during a restore (or a reading migration) bug #982
293 ebl Use qmake-qt4 instead of qmake when available (debian system).
295 kes Add a security warning to src/cats/make_catalog_backup.in indicating
296 that passing the password via the command line (arg 3) is insecure.
297 This responds to bug #990 (it doesn't fix it).
298 kes Apply 2.2.5-postgresql-errors.patch
299 kes Remove unneeded File table index on JobId, which is already
300 present as the first index of another multi-index.
302 kes Set default debug_level to zero. This corrects bugs #991 and #993.
303 kes Fix a crash in bat when it cannot connect to the Director for example
304 if the Director is not running.
306 kes Activate Close button on tray-monitor window. This fixes
309 kes Fix spurious warning message printed when creating a volume with
310 a LabelFormat. This fixes bug #976.
312 Release Version 2.2.5
314 kes Add JobId in place of Job name in all the Jmsg() output.
315 kes Correct the APP_DESC for the Win32 storage service (remove an e).
317 kes Add new SD despooling attributes and Dir inserting attributes
318 job status codes. This fixes bug #961.
319 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
321 kes Fix doc issue. This fixes bug #963.
322 kes Fix listing performance problems in bat. Pointed out by
324 ebl Fix replace on restore. This fixes bug #969
325 kes Fix bat code that tests for Win32. This should fix bug #968
326 kes Query 5 list wrong Vol after migration. This fixes bug #960
328 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
329 in back porting from 2.3.x
331 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
332 The details are included in the notes in this file.
334 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
335 messages; it fixes a problem opening the SQLite3 database when multiple
336 simultaneous jobs were running; it fixes a bug with certain versions of
337 MySQL where batch inserts failed because of table name character case
338 (upper/lower) differences.
339 kes Fix race condition that drops final block written to volume.
340 This happens in rare cases with multiple simultaneous jobs
341 when the Volume fills. This fixes bug #964. May be related
342 to bug #935 and possibly #903.
344 kes Fix FD->SD authorization failure, which was due to spurious
345 wakeups from a pthread_cond_timedwait(). Simply check the
346 predicate before continuing. This fixes bug #953
347 dvl Add new configuration item --archivedir
348 dvl Adjust regression tests to use tmp not /tmp. This will allow
349 multiple concurrent runs of the regression tests.
351 kes Fix race condition that drops final block written to volume.
352 This happens in rare cases with multiple simultaneous jobs
353 when the Volume fills. This fixes bug #964. May be related
354 to bug #935 and possibly #903.
355 kes Eliminate more strerror() and replace with bstrerror().
356 kes Remove BSD getopt and replace with unrestricted IBM version.
357 kes Fix Win32 build for changed calling sequences.
359 kes Fix FD->SD authorization failure, which was due to spurious
360 wakeups from a pthread_cond_timedwait(). Simply check the
361 predicate before continuing. This fixes bug #953.
362 kes Add const char where needed (more to do).
364 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
365 kes Don't overwrite error message in check_tables_version.
367 kes Unlock batch insert tables with same calls used elsewhere.
368 kes Allow starting 59 jobs a second.
369 kes Make SD session key more random.
370 kes Add retry for SQLite opening db if it fails. Probably helps
372 kes Suppress extra error messages during batch insert failure.
374 kes Put some FD auth code on dbglvl rather than fixed.
375 kes Return insert attributes error message in db msg buffer to avoid
376 false error messages. Helps fix bug #966.
377 kes Separate batch init error messages. Probably helps fix bug #966.
378 kes If Dir gets an error during inserting attributes, cancel SD.
379 This reduces unnecessary error messages.
381 ebl Cleanup batch insert code. Probably fixes bug #965.
383 kes Turn off some code when batch insert not enabled.
384 kes Edit FD name in connect error messages.
386 kes Add code to handle tray monitor separated from Win32 FD.
387 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
389 kes Fix ANSI tape labeling. This fixes bug #954.
390 kes Increase the max block size to 4MB fixes bug #957.
391 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
392 is not properly mounted (recognized) during a poll.
393 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
394 Job that has differences reports Verify OK.
396 Release Version 2.2.4
398 kes Increase size of name string when FD making connection to SD.
401 kes Add code to try to fix bug #908.
402 kes Add waits to multiple exit detection code to try to force pid
403 file to always be deleted.
404 kes Restore good dev.tar.gz to rescue set appropriate binary property.
406 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
407 trying to switch drives by checking for blocking before unblocking.
409 kes Cancel storage daemon in all cases where FD reports error. This
410 should fix virtually all cases of bug #920.
412 kes Fix error message that was clobbered when Dir tells SD it does not
413 have write permission on Volume. This should fix a minor point
414 in bug #942, but not the main problem.
415 kes Add code to cancel job in SD if FD connection fails. This should
417 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
418 kes Fix migration code to get correct Volume name with multiple volumes
419 by skipping |. Fixes bug #936.
420 kes Implement patch supplied by Landon to fix bug #944 where using
421 TLS with bconsole uses 99+% of the CPU.
422 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
424 kes Move patches into patches directory.
426 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
429 ebl Using "m" in bconsole will show messages like before,
430 and not memory usage.
432 Release Version 2.2.3
433 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
436 kes Fix bug #935, and probably also bug #903 where files were not
437 restored. MediaId was not properly set in JobMedia record after
440 kes Add ./configure search in qwt-qt4 for qwt package
441 kes Apply Martin Simmons patch that should turn off the new API usage
442 when batch insert is turned off allowing building on older
445 Release Version 2.2.2
447 ebl Detect if new PosgreSQL batch insert API is present.
448 kes Correct incorrect mempool call causing Director crash.
449 sb Update spec files for 2.2.1 release
451 Release Version 2.2.1
453 kes Update POTFILES.in
454 kes Cleanup a few underquoted AC_DEFUNs in configure
455 kes Apply patch from Martin Simmons that adds a test for va_copy to
458 kes Fix bug 921 by increasing the number of tries to create a new volume
460 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
461 can be called multiple times. Implement a version for machines
462 without va_copy() that gets a big buffer.
464 kes Integrate more portable zone offset code into bsmtp.c
465 Submitted by Attila Fülöp.
467 kes Fix bad SD->FD return status reported by
468 (James Harper) <james.harper@bendigoit.com.au>
469 ebl Fix a bug in read_close_session which return random status
470 thanks to James Harper
472 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
473 and directory names during restore of single file/directories.
474 kes Add sanity checks to .sql command when string is empty. Hopefully
475 that will resolve Dirks Director crash.
477 kes Apply patch submitted by Martin Simmons that corrects a seg fault
478 in the bsmtp chat subroutine when debug is >= 10.
480 kes Fix Director crash when running bat SQL queries.
481 kes Add David's notes on Item 8: Copy pools.
483 kes Rework projects file to be current and ready for a vote.
484 kes Enhance lex scanner error message.
486 kes Tweak LICENSE file to mention BSD code.
487 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
488 if specified on the ./configure.
489 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
490 This class is intended to allow us to open a second bsock to the
491 Director while in the restore subdialog.
493 kes Fix configure to create bat Makefile before creating dependencies.
494 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
495 kes Add a tooltip to the tray monitor.
496 dvl Set the Director's PID file before dropping privs. This fixes
499 kes Update AUTHORs file
500 kes Increase the default max concurrent jobs to 20 in FD and SD to
501 correspond with the default .conf files.
502 kes Rewrite the Win32 service routines. This eliminates the 3 copies
503 some different, of the same file created by RN when porting the
505 kes Rearrange some of the Win32 directories and the placement of the files
507 kes Set DEVELOPER flag in version.h
509 ========================================================================
510 Release Version 2.2.0
512 kes Apply a second doc patch from Marc.
513 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
514 improves the tips section that discusses how to setup multiple
517 kes Update bat README file.
518 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
519 corrects a typo in the Recycle status check in db_find_next_volume().
520 This will probably fix a number of annoying problems with multiple
522 kes Modify most of dird/msgchan.c to use bsock class calls rather than
523 bnet calls -- no functionality change.
525 kes Modify the Verify output to specify if files are missing on
526 the Volume(s) or disk. Fixes confusion in bug #916.
527 kes When more than one Volume is read in a migration job, the last
528 Volume bytes reported are from the last read volume rather than
529 the last written volume. Fixed. This fixes bug #910.
530 kes Fix display of Recycle flag after update volume=foo recycle=yes.
531 It previously printed New Recyle flag is: no. This fixes bug
534 kes Correct seg fault when switching tape drives during restore.
535 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
536 be used until after 2.2.0 release.
538 kes Remove fnmatch() in SD that permitted wild card specifications.
541 kes Fix %g in filename returned by SQL for browse tree reported by
543 kes Fix configure so that it puts config.out in the cwd rather than
545 kes Attempt to fix the locking problem reported by Eric in bug #906.
546 kes Make berrno class to leave errno unchanged after constructor call.
547 kes Make bnet_server use the heap rather than the stack to allocate
548 its socket fd pointers to avoid a crash at termination. Problem
549 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
551 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
552 and putting it in depkgs-qt along with Qt4.3.
554 kes Rework code in acquire.c that switches drives for reading when
555 the Media Type does not match. This should fix bug #906
557 ebl Fix a director segfault during job setup #907
558 kes Correct seg fault in postgresql when first operation returns no
559 rows. Fixes Dirks File browser problem seg fault with bat.
561 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
562 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
565 kes Implement PopUp YES/NO dialog for bat.
567 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
569 kes Correct RunScript to terminate job in FD on failure.
570 kes Change abort_on_error and AbortJobOnError to fail_on_error
571 and FailJobOnError in RunScripts.
572 kes Minor tweaks of code formating in RunScripts, principally to
573 avoid depassing 80 columns.
575 kes Eliminate one #ifdef Win32 in bsmtp
576 kes Implement grow tool to grow a file for testing very large databases.
577 kes Add big-vol-test to test Bacula seeking with > 5GB.
580 kes Modify find_next_volume() to return all values in Media record.
581 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
585 kes Update Release notes
587 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
588 Warning, in previous beta version, all media get from scratch keep their
591 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
592 This should fix bug #842. Made a note to look at removing the temp
593 files at the end of the install.
594 kes Add ability to mount and unmount a file device providing it is
595 marked as being removable and has the appropriate mount and unmount
596 commands defined in the Device resource. This fixes bug #830.
597 kes When applying a storage override, release all previous storage
598 definitions rather than just prepending the new storage.
599 This should prevent a good deal of confusion.
601 kes Implement ./configure search for qwt libraries.
603 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
604 Win32 FD. This should fix bug #893.
605 kes Remove an unnecessary beep in Win32 init code.
606 kes Update copyright dates in Win32 executable about boxes.
607 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
608 code with a BSD getopt.c and getopt.h.
609 kes Remove sched.h from the Win32 compat directory -- not used.
610 kes Remove the Exit menu item from the Win32 tray monitor. If you really
611 need to shut it down, do it through the services panel or the command
613 kes Remove some inappropriate Bacula FSFE copyrights.
614 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
615 kes Fix regress config non-portable test as pointed out by
616 Florian Heigl <florian.heigl@gmail.com>
617 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
618 as pointed out by Florian Heigl <florian.heigl@gmail.com>
620 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
621 Reported by Frank Sweetser.
625 kes Fix client-only build.
626 kes Integrate client-only fixes for bsys (initgroups) and conio from
627 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
628 kes Make arguments to get_scratch_volume() in same order as other
630 kes Rework the prune_volumes() subroutine so that after purging and
631 no volume found in desired pool, it will check for a scratch
632 volume. This prevents recycling the whole scratch pool.
633 kes Add code to status storage to print boffset_t (largefile support).
635 kes Move qwt (Graphics libarary for Qt4) to depkgs.
636 kes You now need a --with-qwt=<dir> to be able to build bat.
637 kes Update src/win32/cats/bacula_cats.def to include the new
638 db_get_query_dbids() call on Win32.
640 kes Correct a problem when selecting a scratch volume and moving
641 it to another pool that lost some columns.
642 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
643 kes Enhance Autochanger error messages to include Volume and device name.
644 kes Rework prune_volumes() code to take account of InChanger flag,
645 and to handle recycling volumes going to the Scratch pool and
646 current pool because the RecyclePool directive.
647 kes Implement a better and more efficient db_get_query_dbids() to
648 handle creating and passing back a list of DBIds.
652 kes Start work on new more efficient DBId subroutine. First use
653 will be for recycling volume to Scratch inchanger.
654 kes Increase number of JobIds in pruning from 1000 to 10000.
655 This to be replaced by above routine.
656 kes Begin implementation of building Qt4 on Win32.
657 kes Correct typo in fix I added for bad TLS shutdown.
658 kes Pull 2.0.3 patches into patches directory.
659 kes Update Release notes. Include qt-console in line count.
660 kes Update Projects file.
662 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
663 bug in migration code where a job that spanned two volumes
666 kes Implement new BST_DESPOOLING blocked state. Change from locking
667 during despooling in SD to blocking. This means that other threads
668 can work with the device structure, in particular the reservations
669 system while despooling.
671 kes Fix return in reservation message queue that missed clearing
672 the jcr lock (implemented 26Jun07 below).
673 kes Rename a number of dev methods to make locking function names
675 kes Document locking in lock.c. Move lock structures to new file
678 kes Move reservations message lock to lock jcr only this
680 kes Move main SD locking code into lock.c (new file).
681 kes Update Win32 build to include lock.c
685 kes Dirk committed the qwt library code for drawing graphs in bat.
686 kes Tweak install of qwt so that it is integrated with ./configure.
688 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
689 out by Eric (my typo).
690 ebl Fix configure.in to get batch mode enable
691 kes Return correct string from authenticate.cpp in bat when connecting
693 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
694 spurious line drops when using TLS.
695 kes Do not file reparse points when restoring a file that already
698 kes Implement Windows reparse points -- similar to directories, but
699 we do not descend into it. This is a first cut. They seem to
700 be backed up, but restore is not yet tested.
701 kes Remove restore_blocking in tls code when shutting a socket to leave
702 it in blocking mode. Hopefully this will fix the encryption bug
703 reported by Frank Sweetser.
704 kes When opening a file for backup, tell the OS that we are going to
705 read it sequentially -- optimization.
706 kes Change variable names in authenticate_director() to not conflict
707 with member names in bat. Caused great confusion with compiler,
710 kes Queue openssl error messages in case of comm problem.
711 kes Do shutdown() call if socket terminated.
712 kes Remove some duplicated code in tls.c
713 kes Move more of the bsock member variables into private and access
715 kes Add Frank Sweetser's tls-test to the regression suite.
717 kes Add Swedish sv.po file
719 kes Don't print clock skew message in FD if less than 3 seconds diff.
720 kes Add a bit of VSS info to status client.
721 kes Implement a first cut of Vista VSS, using Win2003 code.
726 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
727 loaded tape but uses first drive).
728 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
729 This was indeed a Win32 issue.
731 kes Simplify search of autochanger for in-use Volume.
732 kes Fix exit condition of check for in-use volume. kes Remove
733 inappropriate my_postgresql_free_result() in db_close()
735 kes Fix bad return in FD when encryption signature not found.
736 Probably caused a crash.
737 kes Inhibit missing encryption signature error messages for
738 file types where no signature computed.
739 kes Correct inverted check on autochanger in reservation system.
740 kes Tweak debug code in autochanger reservation.
742 kes Add some additional locking in the cats directory in subroutines
743 that modify packet variables called from batch insert.
744 kes Rework how dcrs are allocated. new_dcr() can now be called
745 with an existing pointer, and it will simply clean it up.
746 This allows the reservation system to test various different
747 devices, and will permit easy device changes.
748 kes A bunch of changes all over to handle new new_dcr() calling
750 kes Work more on the Volume management in the SD. Remember Volumes
751 for tape drives and for autochangers (even virtual disk changers).
752 kes When looking at the Volume list to reserve a drive, handle
753 autochanger names correctly by interating through the changer
754 devices. Also call the Director to see if a Volume is suitable
756 kes Fix some bugs in bscan. Make sure all media records are written.
757 Make sure that valid JobMedia records are written for disk files.
758 Previously they were completely wrong.
759 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
760 that the URLs don't change and so that the developers will all
761 work off the same copy. Rebuild from scrach.
762 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
766 kes Fix seg fault in FD from incorrect digest size.
767 kes Fix argument to non-OpenSSL crypto.c subroutine.
771 kes Remove a few malloc()s from the encryption code.
772 kes Use the class calls to bsock in filed/backup.c and restore.c in
773 place of the old bnet_xxx code.
774 kes Implement code that does an on the fly calculation of the
775 signing digest during restore of encrypted files. It makes
776 a best guess at the algorithm, and if it is not correct, will
777 then revert to the old code which reads the file after it is
779 kes Implement at least one missing crypto stream in stream_to_ascii()
780 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
781 #877 where a reload with bad syntax causes Dir to exit.
783 Cut: 2.1.14 beta (not released)
785 kes Do not free a volume on a tape drive until another volume is
786 mounted and read, or the autochanger unloads the volume.
787 This should help the SD re-use volumes that are already mounted,
788 and should fix bug #886.
789 kes Apply patch from user brettedgar that allows gnome2-console include
790 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
791 kes Apply patch from Lucien Weller that fixes day of week calculation
792 because of DST flag problem. Fixes bug #887.
794 kes Move find_next_appendable_volume() to after acquiring a valid device
795 in reserve.c. This fixes bug #864 -- confirmed by reporter.
797 kes Unable to reproduce bug 872. However added additional testing for
799 kes Bug #874 resolved by documenting SQLite limitations.
800 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
801 kes Bug #881 resolved by removing typo in mtx-changer script.
802 kes Made Frank Sweetser's wiki the official Bacula wiki with his
803 approval. Added a link to the wiki on the web page, and implemented
804 a backup from http://paramount.ind.wpi.edu
806 kes Fix update allfrompool to pass pool name.
808 kes Convert to pure GPL v2 license.
809 kes Fix sscanf problems reported by Peter Buschman that caused
810 a bus error on Solaris.
811 kes Rework (simplify) the select prompt in bat.
812 kes Move get_jobid_from_tid() into lib and create a
814 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
815 should definitely fix the problem of lost error messages in the
817 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
818 kes Eliminate tcpd.h from the project. Enclose the #include from the
819 library with extern C ...
820 kes Add print of signal name when a signal is trapped.
824 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
826 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
827 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
828 makes SQLit3 run 30 times faster, though a bit less safe.
829 kes Implement --with-batch-insert in configure and detection of thread
830 safe libraries. It is on by default, but turned off if no thread
831 safe library (e.g. SQLite 2) is available.
833 kes Fix Bacula PostgreSQL buffer overruns.
834 kes Do better checking for NULL results returned from PostgreSQL;
835 implement retry for failed queries; clear results buffer after
836 failed query. Hopefully this will correct the PostgreSQL failures.
838 kes Implement algorithm to handle only one appendable volume with
839 Prefer Mounted Volumes = no.
840 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
841 returned from a query.
842 kes Make volume lock recursive.
843 kes Implement an additional volume reservation algorithm that
844 starts by considering all reserved volumes then uses the
845 old brute force algorithm of searching the resources to
846 find a suitable device.
847 kes Add new reservations debug code and refine the old code.
848 kes Update the win32/dll/bacula.defs file.
850 kes Tweak reservations algorithm to permit a few more cases, i.e.
851 volume reserved, but on different drive, ...
852 kes Enhance SD status to include Pool and Media Type for drive in a
853 more readable format (a bit longer).
854 kes Fix PostgreSQL double free.
856 kes Minor refactoring of restore decryption code.
857 kes Add code to smartall.c to detect double free of a buffer.
859 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
860 so that bsmtp will create a correct email address (mailbox only).
861 kes Modify 'memory' command so that the buffers are listed as 'In use'
862 to avoid confusion with Orphaned buffers.
863 kes I reworked the OpenSSL include/lib flags to be handled in
864 the standard Bacula way, which should fix bug #863 concerning
865 non-standard OpenSSL libraries.
867 kes Implement Help Browser window for bat.
868 kes Fix reload bug that reset StorageId to zero.
870 kes Fix TLS #ifdefing when TLS turned off.
871 kes Ensure that when labelling a tape with Slot=0 that InChanger
873 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
875 kes Add StartTime to final uar_sel_jobid_temp query so that we can
876 add DISTINCT (required by PostgreSQL).
877 kes Implement BSOCK authenticate_director() method. Eventually will
878 authenicate all daemons.
879 kes Move several more functions into the BSOCK class.
881 kes Add code to tell the OS that we no longer need a cached
882 file that we were reading. In findlib/bfile.c. Also,
883 only cache files that we are reading. Thanks to
884 Tobias Oetiker <tobi@oetiker.ch> for the idea.
885 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
886 kes Implement script to automatically generate cats and dll .def
888 kes Update README.mingw32 to include new .def file generation.
889 kes Correct typo in UTF-8 error message as reported by:
890 jhernandez <julianhernandez@gmail.com>
891 kes Add additional sm_check() code on debug level 1.
892 kes Set default debug level to 1.
893 kes Trap SIGABRT in attempt to get traceback.
895 kes Reduce bat connect timeout from 30 to 15 seconds.
896 kes More restructuring and implementing BSOCK class in place of
898 kes Remove a few unnecessary malloc() tests in crypto code.
899 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
900 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
901 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
903 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
905 kes Fix Verify InitCatalog. The attributes were not pointing to the
906 correct saved location.
907 kes Implement message callback so that GUI is sure to get all
908 daemon messages. Currently displayed in a dialog in bat.
909 kes Ignore SIGUSR2 (Bacula timer) in bat.
910 kes Apply regress patch from bug #859 to allow regress to work
911 with Solaris compiler.
913 kes Begin adding TLS support to bat.
914 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
915 clean up lex.c and make it more readable.
917 kes Move more bnet functions into the BSOCK class.
918 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
919 kes Complete change of berrno strerror() method to bstrerror()
923 kes Cleanup incorrect email addresses in bsmtp.
924 kes Make bat display initial messages rather than discard them.
926 kes First cut of adding .mod to the run command.
927 kes Implement auto display of messages in bat.
928 kes Enhanced preferences to allow all Bacula output to be
931 kes Fixed bug #856 autochanger documentation.
932 kes Rework bsmtp date editing for Win32. This fixes bug #854.
933 kes Add new cats entry point so Win32 builds.
935 kes Attempt to fix bsmtp date editing on OSes without %z editing.
936 kes Do better checking for the MySQL 64 bit libraries looking for both
937 .a and .so libraries.
938 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
939 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
940 kes Require the thread safe version of MySQL during configure. Thanks
941 to Andre Noll for pointing this out.
942 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
943 continuing in migration code.
944 kes Apply implementation of tray-monitor font derived from gnome-console
945 submitted by Andreas Piesk <a.piesk@gmx.net>
947 kes Eliminate important memory loss in SQLite
948 kes Fixed the batch insert MySQL thread specific data that was not
949 being freed. See cats/mysql.c:db_thread_cleanup().
950 kes Fix restore before command.
951 kes Convert old hdr.name to name() in a few places.
952 kes Implement update jobid command.
953 kes Return all time_t dates in db_get_job_record()
954 kes Stop watchdog in SD earlier.
955 kes Put Pool just after Storage in please mount message.
956 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
959 kes Update the po files.
960 kes Fix Verify InitCatalog by making it cache attributes.
962 kes Change name bacula-bat to bat for man 1 page to correspond to
964 kes Check for client and store NULL pointers in status command. This
966 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
967 kes Fix sign extended editing of %p.
968 kes Clean out a little old #ifdefing in cats/mysql.c
970 kes If time diff between DIR and FD is more than 600 seconds convert
971 INFO message to WARNING.
972 kes Implement heap size display in status for all daemons.
973 kes Attempt to fix MySQL db open memory loss (not successfull).
974 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
975 kes Eliminate memory loss in MySQL (possibly other SQLs) during
976 Query. This looks like a MySQL but but by doing extra releases,
977 the memory goes away. This should fix bug #847.
979 kes When backup fails, cancel SD before waiting for sd termination.
980 kes If SD is waiting for FD to connect during cancel, wake up the
982 kes Fix fsf code so that errno is correctly reported.
983 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
985 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
986 the original jobb's FileSetId.
987 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
988 spooling in migration jobs. Not yet tested.
989 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
990 reading conf file from a pipe. However, do it with open_bpipe()
991 rather than popen. Not yet tested.
993 kes Fix an ugly bug where the VolCatBytes were getting updated
995 kes Implement bconsole memory command that prints current memory
996 usage, plus smartalloc dump.
997 kes Clarify some error messages in backup, admin, and migrate.
998 kes Shrink label dialog to smaller size.
999 kes Invert Cancel OK buttons on restore to be OK Cancel.
1000 kes More strerror() to bstrerror() conversions.
1002 kes Start implementing bstrerror() in place of strerror().
1003 kes First cut at stripping path -- seems to work.
1005 kes Prevent door and port files from being restored (mostly
1007 kes Free an unreleased buffer in compat code.
1008 kes Change console Job name from *Console* to -Console- to eliminate
1009 Win32 filename problems. Put Win32 path separator when creating
1010 Console file. This fixes bug #846.
1011 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1013 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1015 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1016 to force Win32 error message.
1018 kes First cut strip path. The data should be passed to the FD,
1019 but nothing is done with it yet.
1020 kes Enhance the digest and signature routines in the crypto
1021 library to accept a JCR and to use it to print error messages
1022 so that they will go in the Job report rather than the daemon's
1024 kes Simplify some of the verify signature code.
1025 kes Simplify a few of the alternative returns in the signature
1028 ebl Use only POSIX regex instead of GNU regex in breg.c for
1029 File relocation. It fix broken freebsd compilation.
1030 kes Convert all other Dir files to use ne ua class message
1032 kes Tentative fix for missing digest signature in bug 807.
1033 kes Correct handle problem in new win32_ftruncate routine.
1034 kes Convert ua_purge.c and ua_update.c to use new ua class
1035 message routines for bat.
1037 kes Correct incorrect installation of LICENSE in Win32 installer.
1038 kes Display LICENSE at the beginning of the Win32 install.
1039 kes Attempt to correct the need for the png files to be installed
1041 kes Reapply my bat.conf install script in qt-console. I think I
1042 editted bat.pro instead of bat.pro.in and it was lost.
1043 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1044 the /var/lock/subsys for subsysdir. Also corrects typos in the
1047 kes First cut update job.
1048 kes Correct configure to include qmake of src/qt-console directory.
1050 kes Make restore job yes/mod/no print in one command so GUI works.
1051 kes First cut implementing backup and restore client.
1052 kes Correct editing in Verify output that caused a seg fault.
1054 kes Insure that bat.conf is not overwritten during installation.
1055 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1056 while I was implementing migration in March 2006 !
1058 ebl Cleanup file relocation, using char *RegexWhere instead of
1059 char *where + bool where_use_regexp
1060 kes Update some manpages and add bat manpage.
1061 kes Make a first cut at converting bacula.spec.in for bwx-console
1063 kes Apply patch from John Goerzen to add hostname as fourth argument
1064 to make_catalog_backup script.
1065 kes Fix typos I introduced into bsmtp.c
1066 kes Make pm_strxxx() routines handle input of NULL pointer. This
1067 is to protect from NULL pointers returned from SQL databases.
1068 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1069 kes Add more debug to FIFO code -- fix fifo regression test.
1071 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1072 kes Add thread timer to bnet_connect() to break from OS if wait time
1075 kes Update Win32 build to include new files, new symbols, and
1077 kes Implement socket level heartbeat (tcp_keepidle)
1078 ebl Commit File relocation patch
1079 kes Make bat have 'make install' target.
1080 kes Warn during install if old gnome-console binary found.
1081 kes Warn during install if old wx-console binary found.
1082 kes Add -8 option to bsmtp command line to add content type utf-8.
1083 Fixes bug #809. (Character coding problem in bsmtp).
1084 kes If < is found in target (from, to, cc) then do not enclose the
1085 target in < > in bsmtp. Fixes bug #772 (malformed address).
1086 kes When printing certain items in dbcheck, stop after 300000.
1087 Fixes bug #822. (dbcheck loops).
1088 kes Incorrect status in Dir after waiting for mount with poll set.
1091 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1093 kes Print waiting to reserve a device every 5 mins.
1095 kes Don't call close_part in label.c if tape and relabel.
1096 kes Don't free volume if busy in close() -- should help with
1098 ebl Fix #824 RunScript bug (After script could be execute twice)
1099 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1100 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1101 Add a regression script to test RunScript
1103 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1106 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1107 deprecated. No additional bugs will be fixed, and they will be dropped
1108 in a future release (probably 2.4.0).
1109 kes Change name of wx-console to bwx-console to make it more Bacula
1111 kes Change the name of gnome-console to bgnome-console to make it
1114 kes Some time in March, a Feature Request with patch from Jorj Bauer
1115 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1117 The ability for the director to validate a Client (FD) CN against
1118 an arbitrary set of patterns rather than the hostname, with
1119 A new 'TLS Allowed CN' set of directives which are implemented
1120 in the Client resource. Then pattern matching is used in place
1121 of hostname matching against the Certificate's CN. As an example, we
1122 have certificates which (a) use a local CA, and (b) have a CN of the
1124 kes Add new/changed entry points to Win32 build
1125 kes Create unaccepted-projects for projects that are not accepted.
1126 kes Simplify locking in the reservations system.
1127 kes Add more debug code in reservations.
1128 kes Make sure error condition on reserving a volume is handled correctly.
1129 kes Correct handling of volume_in_use.
1130 kes Correct handling of initializing a device.
1131 kes Move handling of broadcasting releasing a device into release_device().
1132 kes Correct attaching dcr to dev so that it is only done if device
1133 is properly initiated.
1135 kes Locking debug level tweaks in SD.
1136 kes Tweak new Volume code.
1138 kes Add exec external-command [wait-seconds] to bconsole. This
1139 executes the external-command. Note! normally external-command
1140 should be enclosed in double quotes.
1141 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1142 it should normally be off in a production system.
1144 kes Implement die command for SD so that we can force it to dump.
1145 kes Implement SD lock debug code.
1146 kes Implement new algorithm for keeping Volume list in SD. It
1147 is now owned by the device.
1149 kes Implement new code for freeing in use volumes that should
1150 resolve if not all, some of the problems of multiple drive
1151 tape conflicts described in bug 801.
1153 kes Fix gui/bacula-web/images files in svn.
1154 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1156 ebl Fix a bug in batch mode (in string escape)
1157 kes Correct migration prune SQL typo that crept in in a
1158 recent 2.1.x change.
1160 kes Move bnet_despool() into class in bsock.c
1161 kes Modify job report to include director name and Build OS.
1162 kes Move drop root privilege and check_catalog() before fork.
1163 kes Add update database scripts (version 9 to 10) to updatedb directory.
1165 ebl Check size and age of each file after its backup to see if
1166 it has changed during backup, if 'checkfilechanges' is set.
1167 The FD will do an extra check (stat(2)) after
1168 each file backup. mtime, ctime and size are compared with
1169 'before backup' information. If time or size mismatch, an
1170 error message will be generated. You must upgrade FD to use it.
1172 kes Make database name and user configurable
1173 --with-db-name=xxx --with-db-user=xxx
1174 kes Add back database type to message.c for debugging.
1176 kes Implement dir_sql() which issues an SQL query.
1177 kes Modify bat medialist to use dir_sql() and do some minor C++
1178 formatting as well as eliminating a number of pointers, simplifing
1181 kes Fix some of the mtx-changer grep commands for tape label readers.
1182 kes Convert a number of bsendmsg into the appropriate send/warning/error
1183 message class calls.
1184 kes Suppress the using database message in the .sql command.
1185 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1187 kes Add context menu for floating a window.
1188 kes Some minor cleanup and name changes in qt-console
1189 kes Add doing mt setblk 0 in Win32 mtx-changer.
1190 kes Apply Martin's bug fix to move definition of ENODATA for
1192 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1193 sqlite2 and sqlite3.
1195 kes More pruning cleanup.
1196 kes Turn on wait_for_drive by default in mtx-changer.
1197 kes Turn on Batch insert code by default as it now passes regression.
1198 kes Add ./configure --enable-bat to enable building of Bat.
1199 No install yet though.
1201 kes Implement a new .sql command for bat.
1202 kes Implement code to turn off pruning in obtaining the next volume.
1203 Pruning is turned off for the status dir command, but turned on
1204 for SD requests and for the list nextvolume command.
1206 kes Correct Qmsg() that was not updated correctly when committing a
1207 previous change (probably the recent TLS patch).
1209 kes Write new subroutine is_volume_purged() that explicitly checks
1210 if the Volume is purged, and if so marks it as such. This should
1211 resolve problems reported about needing to mount twice to recycle
1213 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1214 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1215 amount of duplicated code.
1216 kes Do volume pruning only for the Media Type desired (reduces pruning time
1217 if multiple Media Types are in the same pool).
1218 kes Implement more detailed info in the Job report for the Bacula version
1220 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1222 ebl Add bbatch tool to bench database and insert mode.
1223 Fix sql quote stuff in batch mode
1224 Fix sql stuff for mysql
1226 kes Correct problems with am/pm scheduling. Fixes bug #808.
1227 kes Implement new prunning code that prunes up to 1000 jobs at
1228 the same time. The same technique can be applied to a number
1229 of other prune/purge subroutines.
1230 kes Add an insanity check when starting a new tape job to ensure
1231 that the tape position has not been changed. If so fail the
1233 kes Fix Win32 build for dlls to add the folllowing:
1234 src/lib/bsock.c -- new file with new entry points
1235 src/lib/dlist.c -- new entry points
1236 src/cats/sql_create.c -- new entry point
1237 src/cats/sql_cmds.c -- new DATA item exported
1239 ebl batch mode cleanup bscan-test is ok now.
1240 kes Implement SD code to check length of disk volume before appending.
1242 kes Correct return status on db_batch... routines.
1243 kes Add call to db_write_batch_file_records() to migration code.
1244 ebl Fix AfterJob timing
1245 kes Move the checking of the database in initializion of the Director
1246 to after we drop privileges. This avoids the need for both root
1247 and bacula access to the DB.
1248 kes Correct a misplaced variable definition in src/filed/backup.c
1249 kes Correct how the new batch insert db_create_attributes_record()
1250 uses the arguments. Caused a seg fault in bscan.
1251 kes Implement lock() and unlock() methods in DEVICE class.
1252 Implement block() and set_block(xx) methods in DEVICE class.
1253 kes Modify bnet_connect() so that it uses time() to check for the
1254 wait time expiring (on some OSes, some system calls may not
1255 return immediately).
1256 kes Modify Verify to obtain the previous JobId when it is actually
1257 running rather than at schedule time (as it was in 1.38.x).
1258 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1260 kes When checking pid in pid file, continue running if the pid is
1261 the same as ours. This occurs on IRIX after a system crash.
1264 kes Extend new GUI API.
1265 kes Make the ua structure a class, and implement send_msg(),
1266 error_msg(), warning_msg(), and info_msg().
1268 kes Apply fix from for building wx-console on the Mac from
1270 kes Implement new select mechanism for GUI programs.
1271 kes Reorganize initialization of stackedWidgets in bat.
1273 kes Add updated nagios plugin supplied by Christian Masopust.
1275 kes More bat implementation.
1276 kes File migrate bug with Pool Occupancy using mediaid instead
1277 of jobids. Fixes bug #795.
1278 kes Fix orphaned buffers in filed backup and verify due to
1279 crypto buffers not freed during errors. Fixes bug #789.
1280 kes Extend new GUI api code to tree commands.
1281 kes Ensure that tree and dot commands check console ACLs.
1282 kes Permit marking directory with trailing slash.
1283 kes Allow 20 console connections (instead of only 10).
1285 kes Add smartctl call to bacula-sd.conf as an example of getting
1288 kes Modify jobq.c to let simultaneous restore jobs run. This may
1289 cause them to fail if they cannot get a drive.
1290 kes Add Client Connect Wait to Storage daemon to permit users to
1291 modify the time the SD waits for a FD connection.
1293 kes Correct virtual changer check which was backwards. This caused
1294 volumes to be unloaded into slots already occupied.
1296 kes Apply Command ACL filter to JobId list in restore command.
1297 kes Correct typeo in var.c patch.
1299 kes Don't let Bacula prune File or Job records for the current Job.
1300 kes Fix variable substitution pad + inc bug reported (with patch)
1303 kes Correct SQLite log table index as reported by Luca Berra.
1305 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1307 kes Begin implementing new comm signals for API.
1308 kes Fix a few places in lib/message.c where the open fd may
1310 kes Continue implementing lib/bsock.c (real class). Make jcr,
1311 who, host, and port private. There are new methods to access
1312 them for non-class use. This required touching a number of files.
1314 kes Add LANG=C to autoconf/randpass so it works with languages other
1315 than English. Fixes bug #788.
1317 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1319 You will not be able to generate Include/Exclude list any more.
1320 It will be fixed soon.
1321 If you want to use this, you can apply
1322 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1324 kes Restore of sockets created false error messages because Bacula
1325 no longer restores sockets, but the code was still trying to
1326 set the attributes on a non-existent file. Reported by a user.
1327 ebl finish RecyclePool feature
1328 Media will takes Pool.RecyclePool
1329 when moving from Scratch to a Pool or when user will do
1330 update volume=xxx frompool
1331 To use it, add RecyclePool = aPool to your Pool resource
1334 RecyclePool = Scratch
1338 kes Expand new BSOCK class adding signal() and new BNET signals.
1339 kes Begin enhancing the dot commands adding a new API function
1340 that returns more information and will make it easier
1341 to interface to the Director from a program.
1343 kes Make DEVICE fd private. Its new name is m_fd, and can be
1344 obtained with dev->fd() outside the class. This is the
1345 first of many DEVICE members to be made private.
1346 kes Implement Michael Renner's idea on having a virtual disk
1347 changer. I made some minor modifications (e.g. I did not
1348 implement the Virtual Changer directive, but simply set
1349 the Changer Command to an empty string.
1351 kes Implement a BSOCK send() method that writes the whole record
1352 in a single write() request rather than in two.
1353 ebl add update volume=xxx recyclepool=yyyy
1354 volume takes recyclepool from pool when using update volume=xxx from pool
1356 kes Fix encryption deblocking bug, which caused some restored files
1357 to be truncated. This fixes bug #763.
1358 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1359 kes Fix 12am/pm bug as reported in bug #782.
1361 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1362 ebl Use btime_t instead of uint64_t in media patch.
1364 kes Optimize the use of the database a bit in the Status dir command.
1365 Only open it when needed, ensure that if any previous database
1366 was opened, it is closed.
1368 kes Correct VolCatBytes bug from media patch.
1369 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1370 in the case of orphaned records.
1371 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1372 and File records in 300K chunks to be more efficient. This
1373 idea came from Juan Luis Frances (if I remember right).
1374 kes Apply Eric's scratch patch that moves a purged Volume to
1375 the RecyclePool. Question: how is RecyclePool set? what
1376 happens to the ScratchPool?
1377 kes Apply Eric's media patch that collects read/write media
1378 times as well as byte counts. This patch requires a
1379 simultaneous upgrade of the DIR and SD. Note, there
1380 should be some way to turn off timing. I'm not sure
1381 times are in Bacula units.
1382 kes Apply Eric's batch-insert patch.
1384 kes Update projects list.
1386 kes Implement Include/Exclude file lists in FD as dlists using
1387 the new dlistString class. This permits efficiently having
1388 large include/exclude lists and completes project Item 25.
1389 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1390 console is authorized to cancel the job. This fixes bug
1392 kes Modify SD so that the VolCatJobs medium record is updated
1393 at the beginning of a Job rather than the end. This
1394 fixes bug #775 where exceeding MaxVolJobs caused jobs
1396 kes Added a mutex around getting and setting Volume information
1397 so that multiple simultaneous jobs will single thread.
1399 Switch to using Subversion
1400 kes Remove src/pygtk-console/ from configure
1402 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1403 plus the entrypoints.
1404 kes Apply patch supplied that corrects debug print
1405 in canceling jobs for max run time. Supplied as
1406 part of bug #621, which was previously fixed.
1408 kes Test on job_canceled() and sd_msg_thread_done inside
1409 loop starting the message thread to avoid a race condition.
1411 kes Remove rl_catch_signal from console.c as it conflicted
1412 with the header definition. Fixes bug #765.
1413 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1415 kes Clarify some stored/acquire messages to indicate if the
1416 problem is with read or append.
1418 kes Fix memory leak with storage ids in cats/sql_get.c
1419 kes Terminate watchdog earlier to avoid reference to released
1420 memory -- reported by Jason Austin.
1421 kes Move closing the database from jobq.c to the director daemon
1422 termination routine. This fixes memory leaks for shadow jobs
1423 (i.e. migration jobs).
1424 kes Free up the unique jobid chain items in migrate.c. This fixes
1425 a memory leak problem.
1426 kes Convert some ugly looking for statements to use foreach_alist
1427 in findlib/find.c. This will facilitate converting the structures
1428 to use dlist (for large include/exclude lists).
1429 kes Fix a bug in the btree.c and btree.h routines, then rename them
1430 rblist and add them to be built in src/lib. Include some new
1431 methods written by Rudolf Cejka that make the code more readable
1432 (hides some of the ugly casting).
1433 kes Add set_next() and set_prev() methods which make the code much more
1434 readable. Also add a new dlistString class that facilitates storing
1435 strings in dlists. To be used in the large include/exclude lists.
1436 kes Make some trivial modifications to lib/tree.h that use rblist
1437 rather than dlist for storing the tree links. This was suggested
1438 by Rudolf Cejka. The result of this is that the restore tree now
1439 uses red-black binary trees rather than simple linked lists. This
1440 should give rather dramatic speed improvements for directories
1441 contining large numbers of directories/files (more than 10000).
1443 kes Fix maxruntime bug #621.
1445 ebl Implement the include JobID in spool file name project.
1446 kes Reorder projects file in order determined by Jan 2007 vote.
1447 kes Implement item #12 on project list -- quick release of FD by
1449 kes Fix open of SQLite3 db where user does not have write permission
1450 so that DIR does not crash. Fixes bug #761.
1452 kes Add back missing @ in Win32 Makefile.
1453 kes Change 'Device not configured to autolabel' from INFO
1455 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1456 which should restart an indefinite # of times.
1457 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1458 other DIR specifications.
1460 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1461 Fix path quoting in SQLite scripts.
1462 Fix problems with SHGetFolderPath.
1464 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1466 kes Fix Job restart on error bug that promotes an Inc to a Full
1467 backup. This should fix bug #755.
1468 kes Add qt-console and first cut of code.
1472 kes Fix Bacula->Documentation link on Win32 to point to index.html
1473 instead of bacula.html. Fixed bug #750.
1474 kes Return JobId in db_get_job_record() when JobId==0. This should
1476 kes Do not release source pointers when restarting a failed job.
1478 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1479 This *should* fix bug #747.
1480 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1483 kes Modify USTORE constructor to set an empty store_source string,
1484 and don't copy the store_source string in a cancel. Hopefully
1485 this will fix Arno's seg fault, bug #744.
1486 kes Add back code to disable conio in configure. Fixes bug #743.
1487 kes Correct the Options scanner in the FD to correctly handle
1488 SHA1 option, which was eating the next option. Reported by
1490 kes Add code to indicate when the SD is spooling, spool wait, and
1491 despooling as requested by Alan Brown.
1493 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob