1 Technical notes on version 1.39
5 kes Apply the three patches from Richard Mortimer.
6 bacula-reposition.patch, bacula-tape-reopen.patch, and
7 bacula-eod.patch. This corrects tape positioning on older devices,
8 and also a problem with btape.
9 kes Apply fix from bug report #696 where writing to a FIFO does not
10 work due to a dumb typo.
11 kes Unlock the tape door before the file descriptor is released. This
12 should fix lots of somewhat subtle failures when using an autochanger.
14 kes Correct mtx-changer bug that I introduced in a recent commit, and
15 pointed out by Robert Nelson -- thanks.
16 rbn Fix Windows' daemons so that messages print to stdout if not
18 rbn Add daemon name to trace file name (eg bacula-dir.trace).
19 rbn Fix environment variable expansion in directory names on Windows.
20 rbn Fix autochanger support in fill command.
21 rbn Update SQL scripts to match Unix versions.
22 rbn Fix daemon usage displays.
23 rbn Cleanup bacula-dir.conf template.
24 rbn Install openssl.cnf so that the openssl.exe installed in the
25 Bacula\bin directory can be used to generate keys and
26 certificates for TLS and encryption.
27 rbn Fix cleanup of spool files on Windows.
28 rbn Remove /silent option from daemons on Windows. The new default
29 is the same as the old /silent. To enable the message boxes that
30 previously were suppressed by /silent you must add /debug instead.
31 NOTE: As a result of this change, the first time you upgrade from
32 a previous version of 1.39.x you will receive the message
33 boxes when the remove of the old services succeeds. This
34 is the same behaviour as when migrating from a version prior
36 However, going forward, these message boxes will not appear on
37 upgrades or new installs.
38 rbn Add new /debug option. This option enables the message boxes that
39 previously were suppressed by the /silent option. In addition the
40 daemons running as services will open a console window if this
42 rbn Fix bug with service not being removed on migrated installs. This
43 should correct those cases where the file daemon install was failing
44 when upgrading from versions prior to 1.39.x.
47 kes Turn on heap reporting in Dir with zero debug level.
48 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
49 send the same message to stdout.
51 kes Begin work on new GUI "console".
52 kes Make configure look in non-standard MySQL library directory
54 kes Make mtx-changer automatically configure the autochanger wait
55 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
57 kes Correct drop_sqlite_tables.in script to not delete the database.
58 kes When writing to a log file, close and reopen the file descriptor
59 if there is an error writing the file.
60 kes Modify the autochanger loaded?, load, and unload commands to print
61 the full text of any mtx output if there is an error. Helps to
62 ease diagnosis of autochanger problems.
63 kes Correct a few Win32 errno returns in the VSS code so that hopefully
64 a resonable Win32 error message will be printed.
65 kes Convert a few strcat()... to bstrncat() in the Win32 code.
67 rbn Added Windows version of bsmtp.
68 rbn Fixed path search for Windows so that Bacula\bin is automatically
69 searched for programs and scripts.
70 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
73 Version 1.39.24 beta released:
75 rbn Fix restore problem with c:\ prefix bug #676.
76 rbn Verify that drive letter is valid on restore.
77 rbn Fix re-open() options for tape.
78 kes Apply dvd find volume patch from Richard Mortimer.
79 kes Eliminate the dvd specific mount routines using only the
81 kes Make update_free_space a method of DEVICE and rename
84 kes Require a messages command acl to be able to receive messages
86 kes Add console, system, and scan job types in util.c.
88 kes Print the Volume purged message only for real jobs to keep
89 from cluttering up the daemon messages.
90 kes Lock the tape drive door while Bacula is using the device.
91 kes Add back the 'No Jobs running' message to FD and SD status because
92 my regression script depends on it, and I'm too lazy to change the
94 kes Start using structure assignments (not too happy about it ...).
95 kes Fix a bug in the tools Makefile that broke on Solaris.
96 kes Unload any autochanger drive during a 'release' command.
98 kes Enhance error message when restoring without bootstrap file.
99 kes Check restored size only for regular files.
100 kes Store Python job level in job record in Dir.
101 kes Add back code to open tape device nonblocking, but if rewind fails
102 release file descriptor.
103 kes Modify acquire.c to first try autoloading the device. Also, ask operator
104 to mount tape if drive cannot be opened.
105 rbn Made Windows service tray status windows resizable.
106 rbn Fixed horizontal scrolling of text in status window.
107 rbn Preserve horizontal and vertical scroll position while
108 updating. This prevents the display being reset to the
109 top line every 5 seconds.
110 rbn Fix Windows cross-compile compatibilty problems with
111 *nix variants such as OS X without the zic command.
112 rbn Eliminate dependency on man2html.
114 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
116 kes Fix a compiler warning in compat.cpp
117 kes Change strcpy to bstrncpy in compat.cpp
118 kes Remove some broken code in bdb_list.c
119 kes Fix, hopefully the last, ACL problem in the restore command.
120 kes Update the README.mingw32
121 kes Add new version of upgrade-win32-client.txt to examples directory.
122 Submitted by Michel Meyers.
123 kes Print an INFO message in the job report when a Volume is marked Purged.
124 rbn Fixed handling of external program and script execution
125 so that the format of the command line is more flexible.
126 Now executable path names containing spaces are translated
127 to the equivalent short name automatically. The result is
128 passed to cmd.exe with the quotes removed.
130 kes Apply the recycle patch from Richard Mortimer.
131 kes Convert a few if statements in dev.c to switch statements.
132 kes Start using print_errmsg instead of bstrerror().
133 kes Print a job message in SD when a job is marked to be canceled.
135 kes All code added back. Fixed block.c read/write to loop only 3
136 times. This apparently keeps the OS from crashing (at least
138 kes The kernel bug still persists. Backup something then immediately
139 do a bscan on the same tape, and the kernel will crash.
140 kes Simplifed tape open(). It no longer uses nonblocking mode, which
141 means that opening with no tape loaded will probably take at least
142 6 minutes before an error is reported.
143 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
144 when doing set_os_device_parameters.
145 kes Report open error in mount.c
146 kes Remove all .exe files from the installer directory on make clean.
148 kes Start adding back removed code.
149 kes Back out a number of changes because backups to tape crash my
151 kes Remove the inetd code from the File daemon.
153 kes Add -c option to pg_dump so that it initializes tables when
155 kes Fix FirstWritten time on Volume to be obtained from SD so that
156 it is the actual time the volume was first written.
157 kes Minor Makefile changes.
158 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
159 ebl Add yes keyword to prune/purge command
161 kes Correct a test in block.c that prevented restore of a DVD from
162 looking at the last part in the spool directory.
163 kes Make some error messages clearer mostly by using the word DVD
164 in the message. Improve infor message in read_record for DVDs.
165 kes Remove DVD kludges in dircmd.c label/relabel.
166 kes Move the dvd relabel code from dircmd.c into
167 write_new_volume_label_to_dvd() adding a relabel argument.
168 kes Rewrite the truncate_dvd() code to be much simpler and
169 more logical. First blow away any spool part, then create a
170 new empty part and write to the DVD.
171 kes Rewrite the can_write_on_non_blank_dvd() code making it
172 only ensure that no valid data is on the DVD -- i.e. it
175 kes Minor Makefile fixes.
176 kes Put attach_dcr_to_dev in a subroutine.
177 kes Make attaching/detaching to/from a device use a flag and
178 only detach if actually attached.
179 kes Add dvd-simulator.in to scripts directory and add to configure.
180 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
181 This could be a cause of a number of drive reservation problems.
182 Note, this code is now in attach_dcr_to_dev().
183 kes Suppress doing Volume updates if it is a system job. This should
184 prevent the DVD label blocking.
185 kes Clear the freespace ok flag in a couple of strategic places.
187 kes Put removing zero sized spool part file in subroutine and
188 call from release_device().
189 kes Add Richard's patch for relabel to dircmd.c, but save and restore
191 kes Rework a lot of subroutines in dev.c to take dcr as an
192 argument. This is done to eliminate the usage of attached_dcrs
194 kes Change truncated_dvd to blank_dvd, which seems more suitable.
195 kes Apply most of Richard Mortimer's truncate patch.
196 kes Create lseek() method for DEVICE that takes dcr as an
197 argument. This is to eliminate the use of attached_dcrs in
198 lseek(). The calls to lseek_dev() must still be changed.
200 kes Apply Richard Mortimer's patches for printing an error
201 message in btape when a DVD is used, and to initialize traceback.
202 kes Added error message to btape when trying to access a file.
203 kes Move prototype of update_slots() to protos.h.
205 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
206 and FDJobStatus to the Director Python variables.
207 kes Make sure valid argument passed to str_to_utime() where Arno
209 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
210 I.e. part of two different patches.
212 kes Modify disk changer to simulate some of the error conditions
214 kes Make sure the close() call in the SD tools is just before the
216 kes Implement dir_get_volume_info() in bls using the patch from
217 Richard Mortimer but call find_num_dvd_parts().
218 kes Implement find_num_dvd_parts() that mounts and scans a DVD
219 and counts the parts.
220 kes Move the omode code in open_dvd() up so that the cannot
221 write on blank disk can check can be bypassed for read mode.
224 kes Disable normal data spooling for DVD writing which uses
225 a different spooling mechanism.
226 kes Apply patch from Richard Mortimer to ensure that the number
227 of DVD parts is correctly updated.
228 rbn Save installer details log in the Bacula directory as
230 rbn Add installer generation of client and storage templates
231 suitable for @inclusion on the director.
232 rbn Mark previously installed components for Win32 read-only since
233 deselection doesn't do anything.
235 Version 1.39.22 beta released:
237 kes Fix logic error in handling error return from mtx-changer
239 kes Make status from SD aware of -1 (unknown) Slot status.
240 kes At Eric's suggestion make both the 'slots' and 'drive' commands
241 to the Storage daemon work even if the drive is busy.
242 kes Make two separate Win32 menu links for starting bconsole and
243 wx-console in winbacula.nsi
244 kes Apply DVD part_spooled patch from Richard Mortimer
245 richm@oldelvet.org.uk
246 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
247 rbn Fixed problems migrating settings from previous releases in
248 Win32 installer. Add Readme.txt with an option to show it on
249 the installer Finish page.
251 kes Use get_catalog_resource() to open catalog database
252 to ensure that ACLs are respected and that user is
253 correctly prompted for database.
254 kes Integrate multiple console/director patch from
255 Carsten Paeth calle@calle.in-berlin.de
256 ebl Add character substitution in Job/JobDefs WriteBootStrap.
257 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
258 kes Apply patch supplied in bug #656 to pass priority field
259 in the run dialog to the Director in gnome console
260 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
261 this will fix bug #627 where Bacula eventually gets
262 confused about what Volume it wants.
263 kes Add a new close_part() class in the SD to save the device
264 state around open/close_part/open for DVD writing. This
265 should fix the num_dvd_parts getting zeroed as reported by
267 kes Apply patch from Richard Mortimer that correct edit code
268 for debug output of st_size.
269 ebl Add support of encrypted data stream to bscan.
270 display data_len instead of data content (may be binary)
272 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
273 bcopy. Fixes bug #669 reported by Eric.
274 kes Fix incorrect number of arguments in SQL statement in
275 sql_get.c as reported by Eric.
277 kes Update examples directory.
278 kes Remove unused variable in winservice.cpp
279 kes Make Win32 make command build installer.
280 rbn Add new Install Type page, used to select between Automatic
281 and Custom installs. Automatic installs only prompt for
282 configuration items that can't be reasonably defaulted.
283 rbn Added Bacula logo to page headers.
284 rbn Added Upgrade support
285 - Configuration and component selection are migrated from
287 - Configuration of upgraded components is preserved and
289 - Configuration of new components is handled according to
290 the Automatic / Custom selection.
291 - Component selection is defaulted to previously selected
293 rbn Installation of Server components is disabled on
294 Windows 95, 98 and ME.
295 rbn Added URLs for support, info and upgrades to Bacula entry
296 in Add/Remove Programs.
297 rbn Added Version info to Bacula entry in Add/Remove Programs.
299 kes Correct dvd code that breaks tape labeling.
300 kes Implement Enabled on update slots.
302 kes When doing a label, pass the VolBytes back to the Director,
303 which puts it in the catalog.
304 kes Print an error message if the user attempts to prune an
306 kes Need to start using %ld when sscanfing 32 bit values.
308 kes Correct the counting of VolCatBytes for DVDs.
309 kes Add code to mount.c to require that VolCatBytes corresponds to
310 what is actually found when doing an append.
311 kes Update freespace only after writing on the DVD.
312 kes Remove code that blows away the current part in the spool file.
314 kes Apply new dvd-handler patch from Richard Mortimer.
315 kes Tweak so that debug level 20 shows only DVD commands.
316 kes Correct spooled_part flag in dev.c close() so that it is cleared
317 when the spool file is deleted or does not exist.
318 kes Print part number in read_records when eof hit (restore).
319 rbn Installer default changed to start services on new install.
321 kes Make find with no args in tree restore return error rather than
322 stopping the selection. Fixes bug #665
323 kes Rework DVD writing to ensure that the last part is written
324 on open_next_part when dealing with a spool file.
325 kes Correct the lseek_dev() routine to handle end point correctly
326 (bug introduced by me).
327 kes Allow part number to exceed num_dvd_parts in lseek_dev().
328 rbn Change make_session_key on Windows to use WIN32 APIs to produce
330 rbn Add new tool scsilist.exe which displays the changer, tape and
331 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
332 to add them to bacula-sd.conf.
334 kes Apply dvd-handler patch from Richard Mortimer.
335 kes Apply dvd error check patch from Richard Mortimer.
336 kes Apply bpipe race patch from Richard Mortimer.
337 kes Rework how DVD labels are handled and set append only
338 when part > num_dvd_parts.
340 kes Rework many features of DVD writing and reading. Added many error
341 messages. Most importantly changed part to represent the current
342 part number base zero. This makes current DVD writing incompatible
343 with previous version.
345 kes Add host:port to connect failure messages to FD and SD from Dir.
346 kes Add WhereACL to console ACL list. If nothing is specified, only
347 the default is permitted for restore. Otherwise, *all* allows any
348 path, or you can specify permitted paths. This should allow control
349 over where users can restore files. This is untested.
350 kes Modified message to add a ? (as in loaded?) when querying the autochanger
351 for what Slot is loaded.
352 kes Fixed the use of Slot, so that is more correctly maintained, thus
353 eliminating unneeded duplicate calls to determine what Slot is loaded.
355 kes Install man pages with 'make install'
356 kes wx-console crashes because of differences between Bacula and wxWidgets
357 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
359 kes correct improper indenting in wx-console/console_conf.c
360 kes update wx-console header copyrights
361 kes Fix bug #658 where wx-console mangles file/directory names containing
364 kes Add Media.Enabled flag to client backups for dotcmds.c
365 kes Enforce Media.Enabled=1 for a current restore to work.
366 kes Require restore case 3 to have sqlquery permission to work.
367 kes Remove obsolete del_MAC sql command.
368 kes Ensure that bscan creates Volumes with Enabled=1.
370 Version 1.39.20 beta released:
372 kes Correct missing Client table reference in SQL pointed out by
375 kes Fix Win32 build (new entrypoint, start baculafd).
377 kes Add -n option to bconsole to turn off conio.
378 kes Print JobIds to be migrated in Job Report.
379 kes Add additional user supplied notes to the messages part of
380 bacula-dir.conf concerning multiple email addresses.
381 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
382 kes Add more recent Feature requests to Projects file.
384 kes Apply Maritn's fix to src/win32/Makefile.
385 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
386 kes Implement pruning for Migration and migrated jobs.
387 kes Implement PoolOccupancy migration.
388 kes Implement PoolTime migration.
390 kes If doing a mount, look for a slot, and if specified pass it to
391 the SD so that it can load the autochanger.
392 kes Return DVD=1 flag if a label command is done to a DVD. This
393 permits setting VolParts to 1.
394 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
395 rework ua_label code based on DVD media type to use DVD flag returned.
397 kes Eliminate some compile warnings in dird_conf.c
398 kes Format the bytes field in the terminated jobs part of the status
399 command for the three daemons with suffixes to reduce print size
400 of backup bytes. Suggested by a user.
401 kes When not descending into a directory, print the File= name that
402 triggered it -- makes why not descending a bit clearer.
403 kes Do not unload autochanger when doing a list command -- basic code
404 from Eric Bollengier.
406 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
407 to build-depkgs-mingw32. It now handles two options -h to display
408 help and -C to reextract the source and apply the patches. The -C
409 option is useful for updating the source after new patches are
411 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
412 This allows updating to new versions without having to modify the
413 script and makes it easier to figure out which packages and which
415 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
416 as build-depkgs-mingw32 except they are built using Microsoft Visual C
417 and placed in the depkgs-msvc directory. There is also an
418 External-msvc file to describe the packages.
420 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
422 kes Fix bug #462 incorrect error message printed when client script called
423 from File= was not found.
424 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
425 do a rewind on Solaris when no tape is in the drive (Solaris does not
426 have the detailed errno found on Linux). Added Solaris specific code.
427 Note, this may apply to other OSes as well.
429 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
430 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
431 fix bug 648 - update sqlite script patches, lock out gnome2console
432 builds for platforms with gtk+ < 2.4.
433 Updated build_rpm.sh - add remote source directory, add switch for
434 signing, refine file names.
435 Updated spec file again for Mandriva build as they have this curious
436 custom of silently converting all manpages to bzip2 format just before
437 the final packaging step.
439 rbn Fixed the Windows Makefiles so that they won't accidentally try and
440 pickup binaries for the Unix build. This allows both the Unix
441 build and the Windows build to be built in the same tree without
442 interfering with each other.
443 rbn Fixed error handling and cleaned up mtx-changer.cmd.
444 rbn Added the rest of the database scripts. These are installed but are
445 not yet edited for variable replacement.
446 rbn Broke out the cats functionality from bacula.dll and put into new
447 separate dlls for each database type. At installation time the
448 correct one is copied to bacula_cats.dll.
449 rbn Eliminate the need to install the mysql.dll on client only builds.
450 rbn Moved dird/sql_cmds.c into the cats directory so all the database
451 specific #ifdefs were in the cats directory.
452 rbn Added a new sql_cmds.h with all the declarations for the variables
453 exported from sql_cmds.c.
454 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
455 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
457 kes Correct improperly formatted list command output reported by Dan.
459 kes Correct despool time calculation.
461 kes Remove previous changes to compat.cpp as they create problems.
462 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
463 kes Attempt to fix problems with the msg_queue crashing on Solaris
464 when Bacula is terminating, but problems remain.
465 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
466 name editing problems with too many \\?\es.
467 kes Fix some Bacula source code style problems in compat.cpp.
468 kes Add debug code to compat.cpp and convert non-Bacula debug code
471 kes Change the name of the technical notes file from kes-1.39 to
472 technotes-1.39. Prefix my messages with 'kes '.
473 kes Allow dequeue_messages() to be called twice. Should fix bug
475 kes Add Job type to bscan Job information output.
477 kes Update copyright date in program files, and for the most part
479 kes Implement %q in bsnprintf.c apparently I forgot it.
481 kes Make disk-changer sed command compatible with FreeBSD.
482 kes Make a first cut at a ReleaseNotes and ChangeLog for a
484 kes Make make clean descend into the src/win32 directory.
485 kes Fix some #ifdefing so that Solaris and FreeBSD compile
486 sys/stat.h was turned off.
487 kes Use suffix editing for new transfer rate messages.
488 kes Attempt to come up with a workaround which seems to be an OS
489 bug where write() returns EBUSY. IMO this should not happen.
490 It triggered in truncatebug test. The workaround retries using
492 kes Eliminate a strerror() call in a class method that failed with
494 kes Use rm -rf rather than rmdir to delete the src/win32/release
495 directory during make clean.
497 kes Make bscan ignore ACL streams.
498 kes Update projects files with new Feature Requests.
499 kes Generate current English and French manuals and upload
501 kes Update the home page to include the new British/French flags to
502 switch between translations. Work done by Alexandre Baron.
503 kes Make disk-changer script print an error message if the changer
504 directory is not defined.
505 kes Create a generic DB routine for getting an int (32/64 bit) from
507 kes Add more migration code.
508 kes Add a few more files to .cvsignore here and there.
509 kes Minor fixes for SD write rate and despooling rate.
510 kes Turn off new test code in src/console.c
514 kes Incremented the version number to signify that all of Robert's code
515 for Win32 that was in the branch is now integrated into the HEAD,
516 and that Eric has submitted code that we hope will provide limited
517 backward compatibility with 1.38 file daemons (more testing to be
519 kes I rationalized a few of the names of the variables (mainly jcr names)
520 that are used during migration as keeping three different jcrs at the
521 same time clear in ones head is not easy.
525 eb Tweak new runscript feature to work with 1.38.x FDs.
526 eb Correct crypto.c to fix segfault when restoring an encrypted stream
527 on fd which don't use rsa keys.
528 eb Add yes/no English keywords on localized yes/no questions.
530 kes Several important commits from Robert Nelson for code cleanup and
532 kes Modify console.c so that when conio is enabled, it converts \n to
533 \n\r before outputting to the console. Hopefully this will fix
534 the problems with expect in Perl that Eric saw.
536 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
538 kes Add Comment field to llist of a volume.
539 kes Allow true/false in some yes/no questions.
540 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
541 kes Remove a few /n's when scanning commands from another daemon. This
542 permits adding additional fields later.
543 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
544 kes Update README.mingw
546 kes Tweak authentication to work with 1.38.x FDs.
547 kes Tweak catalog make scripts.
548 kes Fix catalog upgrade scripts so that they work.
549 kes Correct despooling debug code to eliminate race condition.
551 kes Add additional fields as specified by Arno to LocationLog.
552 kes Add comment field to the Media record.
553 kes Add Time field to the Log record.
554 kes Correct migration SQL (thanks to Bill Moran) so that it
555 runs with PostgreSQL also.
556 kes Add spooling/despooling info in status output of SD.
558 kes Spend a lot of time integrating mkcdrec with the rescue disk.
559 kes Add VOLMGMT message class for volume management messages (none yet).
560 kes Add CATALOG as a destination. It goes into the LOG table.
561 kes Implement the Log table in the DB.
562 kes Implement the Location Log table in the DB (for user use).
563 kes At Eric's request add a run_scripts() just after blast_data in
566 kes Add Enabled column to Location, correct some typos in DB schemas.
567 kes Correct bug I introduced into RunScripts enum.
568 kes Add log table to Catalog
569 kes Purge original job migrated if the migration terminates normally.
570 kes Cleanup purging of files/jobs so that it is done only in a
572 kes Add new VOLMGMT message class.
573 kes Add Catalog message destination (user conf code remains to be written).
575 kes Modify read_record and friends to properly deal with migration
577 kes Update debug code in read_record.
579 ======================= Warning ==========================
580 Separate read and write storage in Jobs in the Director. This
581 is a major rewrite of some of the low level code and hence has
582 a high probability of introducing bugs.
583 ==========================================================
585 kes Move the job init code up to *before* the job is put into
586 the job queue (resource allocation queue). This permits the
587 job to establish whether it will read or write or do both.
588 kes Add name() methods to all the resource classes.
589 kes Implement separate read and write storage resource
590 allocation/deallocation in jobq.c
592 ======================= Warning ==========================
593 Implemented new method of getting the default Storage from the Media
594 record rather than from the MediaType for restore. As a fall
595 back, if no Storage is defined, use the MediaType. This
596 eliminates most all prompts if there are multiple MediaTypes
597 used. This is an important and fundamental change.
598 ==========================================================
600 kes Add more detail (Storage, Device) to list of volumes printed
602 kes More code in migrate. In particular start multiple jobs if
604 kes Probably overkill, but ensure that the bsr is unique even within a
606 kes Rework bsys.c drop() so that it now should work as expected.
607 kes Update a bunch of old copyrights -kes particularly in .h files.
608 kes Remove src/lib/bshm.c/h
612 ======================= Warning ==========================
613 All hash codes in the database are now kept in world
614 compatible base64 format (no = filling). This means that
615 all FileSets will be updated and if you are running
616 verify jobs, you must do an InitCatalog.
617 Authentication uses the new algorithm, but should be
618 backward compatible with 1.38.x
619 ===========================================================
621 kes Modify the authentication routines so that the 1.39.15 Director
622 always runs with the compatible binary to base64 code (same as
623 the rest of the world). It will however detect if an SD or
624 FD is running the old code and if that is the case, will use
625 the old algorithm for authentication. However, all consoles must
626 use the compatible algorithm, and all data entered into the database
627 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
628 use the compatible algorithm.
629 kes Rename the cram_md5 routine names to be slightly more appropriate
630 to what they are doing (challenge and respond).
631 kes Robert committed his #ifdef and header cleanup.
633 kes Fix a compiler warning in files/backup.c
634 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
636 kes Robert committed his low impact changes.
637 kes I removed a size_t from the jcr.h definition.
638 kes Update the tape regression scripts (still to be tested).
639 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
640 kes Require done or quit to exit from in memory tree restore.
642 kes Write install/uninstall of new manpages. There are now a
643 pile of man pages. Some of which need a lot of work.
645 ======================= Warning ==========================
646 The --mandir ./configure option now points to the top level
647 man directory. The man files will be installed under
648 mandir/man8 and mandir/man1 as appropriate.
649 ==========================================================
651 kes Add complete text of GPL to LICENSE.
652 kes Implement job report that indicates where Storage and Pool
653 came from -kes with overrides and Pool storage and NextPool,
654 it is all very complicated.
655 kes Create a few common subroutines for backup.c and migrate.c
656 kes Eliminate warning messages from tray-monitor.c
658 kes Apply fix for scheduler for missing unlock_jobs().
659 kes Clean out autoconf caches before rebuilding configure
660 kes Fix the FreeBSD pthreads lib define updated by Dan.
661 kes Add missing semicolon in src/console/console.c
662 kes Add Robert's enhanced version of build-win32-cross-tools
663 as well as his patch file.
664 kes Note, the new gcc options are likely to break building of
665 wx-console or the tray-monitor ...
667 kes Implement Robert's suggestion to suppress printing compile lines.
668 kes Detect GCC correctly (I hope)
669 kes If using GCC (actually g++) add the following compiler flags
670 -fno-strict-aliasing -fno-exceptions -fno-rtti
672 ===================== Warning =============================
673 Turn on new bsnprintf() code. This could cause print output
675 ===========================================================
677 kes Fix crypto when not using openssl. I previously overlooked this.
678 kes Eliminate crypto type punning problems by eliminating void * and
679 using uint8_t * instead.
680 kes Harden authentication failure in FD by single threading errors
681 and forcing a 6 second wait.
683 ===================== Warning =============================
684 Removed 'Accept Any Volume' directive.
685 ===========================================================
687 kes Major cleanup and simplification of regress using shell functions
688 (more tests to be converted to new format)
689 kes Add detection of 64 bit Irix as indicated by user.
690 kes Increment catalog database id from 9 to 10.
691 kes Add a few of the new database fields to the various C++
693 kes Implement code to fill in the most important new fields (e.g.
695 kes Ensure that most of the new fields are in create/get/insert/update.
696 More work to be done.
698 kes Update some very old licenses in src/cats.
699 kes Modify the database format for handling Migration jobs:
700 Add PriorJobId, RealEndTime to Job table
702 Remove Stripe from JobMedia record (not used, wasting space)
703 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
704 Add Cost to Location table.
705 kes Delete mac_record subroutines.
706 kes Add new table values to create/update/get routines as appropriate.
707 kes Update the update_tables and make_tables scripts.
708 kes Make a first cut in using a union where multiple pointers (actually
709 pointers to pointers) are stored.
710 kes Make some changes to base64.c suggested by Robert and others and add
711 a small amount of documentation.
712 kes Add some changes suggested by Peter for Solaris (bregex...)
713 kes Make runscript.h always built because it needs to be pulled into
714 more places. In particular its RES was left out of a union.
715 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
716 This makes it slightly easier to detect uninitialized variables.
718 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
719 sometimes creates install problems.
720 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
721 Nelson's code. More to do.
722 kes Convert a few store_bit to store_bool in filed_conf.c.
723 kes DVD tweak to block.c as supplied by Uwe Muessel.
725 kes Modify configure.in to check for typeof().
726 kes In findlib/attribs.c use typeof instead of templates if possible.
728 kes Implement partial error messages for src/filed/acl.c
729 kes Fix return code to fail when doing update barcodes and
730 Pool resource is not found. This previously caused Volumes
731 to be labeled as cleaning tapes.
732 kes Small updates to projects.
734 kes Add Eric Bollengier patch for new RunScript directive. It breaks
735 compatibility between dird and fd.
737 kes Prevent DVD code from rewriting label if the device cannot be
739 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
740 fix Debian build bug.
741 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
742 kes Integrate manpages contributed by Jose Luis.
743 kes Update projects file.
744 kes Add manpages Makefile.in to configure.in
745 kes Remove installation of bacula.8 in scripts directory.
747 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
749 O_NOATIME is a open() flag which makes it possible to read a file without
750 updating the inode atime (and also without the inode ctime update which
751 happens if you try to set the atime back to its previous value). It also
752 prevents a race condition when two programs are reading the same file, but
753 only one does not want to change the atime. It's most useful for backup
754 programs and file integrity checkers (and bacula can fit on both
757 Recent versions of the Linux kernel and glibc have support for it (the
758 glibc support being mostly copying the O_NOATIME definition to
759 bits/fcntl.h). If there's no support for it on the kernel, trying to use
760 it does nothing (since the kernel ignores unknown flags).
762 If the kernel has support for it, trying to use it either works, fails
763 silently (mostly in remote filesystems), or returns errno=EPERM (if you
764 are not either the owner of the file or root). A simple way to prevent the
765 failure is to open the file without the flag and set it later with
766 fcntl(F_SETFL), ignoring any EPERM errors.
767 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
768 of restarted jobs to complete (due to a destroyed pthreads conditional
769 variable used by the message thread).
770 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
772 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
773 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
774 colons in query.sql file.
775 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
776 not to create orphans.
777 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
778 in restore long listing.
779 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
780 of incorrect MarkedId.
781 kes Apply patch from adioso bug #616 to correct text in manual (replace
782 Director with File daemon).
783 kes Rework a few of the zlib changes so that they build properly.
786 kes Move DIR 'run' command to SD before starting the message thread
787 as suggested by Cristopher Hull to avoid a race deadlock from
788 two threads using the bsock structure.
789 kes Modify LICENSE to correct some problems pointed out by Debian.
791 kes Correct EOF with no \n lex.c problem.
792 kes Tweak compat.h compat.cpp and merge with apcupsd
793 kes Add additional INFO messages if autochanger cannot be used.
796 kes Simplify Win32 Makefile
797 kes Correct count of buffers/bytes used by smartall.c
798 kes Updated compat.h after porting apcupsd to MinGW.
800 kes Work on getting wx-console building on MinGW. wxWidgets now builds
801 started adding Makefile ...
802 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
804 kes Reloading a bad configuration file doesn't kill director any more.
805 Thanks to fix from Eric Bollengier.
807 kes Fix problem of accents with new Win32 code.
808 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
809 works in the MinGW build with the exception that there
810 is a problem with accented characters -kes i.e. there is
811 some mapping problem with wide characters.
812 kes The code no longer compiles with Microsoft VC++.
814 kes Start implementing Christopher's St.Bernard code.
815 kes Add Christopher's mods for opening files.
816 kes Strip \r \n from Win32 error messages (Christopher)
817 kes Add more info about Win32 system if unknown (Christopher)
818 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
819 kes Fix a number of incorrect strings marked for translation, when
820 they should not be (e.g. commands).
821 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
822 Patches supplied by user in bugs #608 and #599.
823 kes Use most recent of st_ctime and st_mtime in restore tree DIR
824 listing. This fixes some problems with Win32 printing incorrect
826 kes Correct the clock shift comm time calculation between the DIR
827 and the FD. It was added rather than subtracted.
828 kes Strip all backslashes in filenames to be restored on Win32
829 machines -kes the names should all be in Unix format, and if
830 there are any backslashes it is most likely due to an improper
831 FileSet definition, and the files will not otherwise be
833 kes Remove lib/regex.c (replaced by bregex.c).
834 kes Delete src/win32/License.txt
835 kes Modify installer to install LICENSE
837 kes Fix bug in build-win32-cross-tools script reported by Howard
838 kes Implement cross compiled bconsole
840 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
841 kes Write first cut of README.mingw32
842 kes Add back ua_label barcode fix from Rufolf Cejka.
843 kes Integrate the majority of the Mingw cross-tools submission
844 made by Howard Thomson. Everything compiles, with zlib, openssl,
845 and VSS turned off. Linking needs a pthreads library ...
847 kes Add 'Dir Status' button to the gnome console.
848 kes More work on migration.
849 kes Restore non-compatible base64 coding to permit compatibility.
850 kes Display heap stats in Storage daemon without debug level.
852 kes Integrate most of the MinGW changes -kes more to do.
854 kes Implement using pg_config for finding PostgreSQL files.
855 Fixes bug #600. Patch supplied by user.
856 kes Remove -t option from mktemp in mtx_changer.in and use
857 working directory. Fixes bug #578.
858 kes Update job start time after the any run before job so that
859 files created by the script are only backed up once. Fixes
861 kes Strip trailing newline only from filenames entered in
862 the restore command when reading a file. This permits
863 the user to enter filenames with trailing spaces. Fixes
864 bug #549. The user supplied a patch that I modified slightly.
865 kes Use the most recent time (st_mtime, st_ctime) in the dir
866 command in restore. This gives the user a better idea of what
867 the newest file really is. This fixes bug #574. The fix
868 was suggested by the user.
869 kes Implement a compatible version of base64. This permits external
870 programs to duplicate Bacula's base64 algorithm using standard
871 routines. This fixes bugs #296, and 565. Patch submitted by
873 ================= Note ========================
874 Previous Signatures stored in the database are no longer
875 compatible with this. The main downside is for Verify jobs,
876 and doing an InitCatalog run will fix the problem. Also, the
877 authentication between the deamons is changed, so all daemons
878 must be simultaneously upgraded.
879 ==============================================
880 If you don't like this fix, set:
881 const bool compatible = true;
883 const bool compatible = false;
886 kes Ensure that DB signature is never NULL.
887 kes Ensure that DB table names are not translated.
888 kes Fix scheduler to handle time skew (eg daylight savings).
889 kes Fix scheduler to use lock_jobs() to avoid most problems
890 with reload. Window is now milliseconds.
892 kes Apply patch from Christopher Hull
893 kes Allow multiple connections to database with different
895 kes Invalidate the scheduler when doing a reload. Fixes seg
896 fault, but still 60 second window.
897 kes Additional info in Reschedule message.
898 kes Use set_jcr_job_status() everywhere to prevent loss of
900 kes Display peer IP in FD if error from connecting DIR.
901 kes Don't increment file count for DIRBEGIN.
902 kes Replace illegal characters in Win32 filename by _.
903 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
904 kes Hash hard link filenames rather than linked list.
905 kes Fix for security failure in chdir on Win32.
906 kes Add CreateDirectoryA/W win32 API entry points.
907 kes Add /silent option to Win32 FD for Install/Remove service.
908 kes Always print Heap statistics in FD.
910 kes Remove the -f option from the chown in Makefile.in for more
912 kes Change setting the group in Makefile.in to use chgrp for
914 kes Implement a write_store and read_store to replace
915 dirstore in reserve.c
916 kes Implement a Bacula read/write lock for Python rather
917 than using the Python lock to avoid recursive problems.
918 kes Correct the uninstall directory names in filed/Makefile.in
919 as reported by a user.
921 kes Correct some problems with database creation (new tables).
922 kes Replace a bunch of old 0x%x by %p.
923 kes Get first cut of Migration with Job selection working.
925 kes Change store_bit() to store_bool() for the Spooling in
926 dird_conf.c -kes bug reported by Robert Nelson.
928 kes Correct Makefile bug found by Dan Langille.
930 kes Correct Makefile for Solaris /bin/sh
931 kes Correct mtx-changer.in for Solaris /bin/sh
932 kes Abort if a conf resource does not have a Name =
934 kes Change the name of the regex program to bregex.
935 kes Add the bwild program to the tools directory. It is similar
936 to the bregex program.
937 kes Implement create bregex.h and bregex.c in src/lib from the
938 Python regexp program.
939 kes Use the new bregex.c to implement Regex expressions on Win32.
941 kes More work on migration.
942 kes Implement wild program in tools directory for testing
943 wild-cards. Almost identical to the regex program.
944 kes Up port VSS single thread locking code.
945 kes Replace N_(..) by NT_(...) to inhibit translation of
947 kes Modify Makefile to change the permissions on Working Directory
948 to 770 if the directory is created.
949 kes Do not fail the Makefile if changing the permissions or
950 owner/group on WorkingDir fails.
951 kes Remove early selection of Scratch Volumes in the recycling
953 kes Correct the old recycling algorithm so that Scratch Volumes
954 are selected when looking for a Volume in the changer.
955 kes Correct a typo in the Verify SQL reported by Joe Park.
957 kes Remove automatic case folding on Windows FDs. You must
958 explictly use the 'Ignore Case = yes' option.
959 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
960 scratch volume in an Autochanger early in the 'recycling'
963 kes Make weof() and clrerror() methods of class DEVICE.
965 kes Tweak license to include Microsoft restrictions.
966 kes Move mysql.reconnect to after real_connect(). Thanks to
967 Frank Sweetser for the patch.
968 kes Disallow a backslash in a File = directive (Windows junk)
969 unless the string is quoted.
970 kes Apply Eric's patch to ua_label.c so that daemon protocol
972 kes Add NT_ definition for strings that should not be translated.
973 kes Apply NT_() to ua_label.c
974 kes Remove timed wait for VSS on Win2K3 as it is not yet
976 kes Correct bacula.in script to reference bacula-ctl-xx in the
977 sysconfig directory rather than the bin directory.
979 kes Fix a long standing bug in the bacula start/stop scripts.
980 kes Attempt to add the new bacula-ctl-* files to the rpm.
981 kes Switch to using typeof() for list traversing to avoid
982 as many FC5 g++ compiler warnings as possible.
984 kes Split the bacula start/start script into four files:
985 bacula -kes starts and stops calling other scripts
986 bacula-ctl-dir -kes starts/stops the director
987 bacula-ctl-fd -kes starts/stops the File daemon
988 bacula-ctl-sd -kes starts/stops the Storage daemon
990 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
991 kes Correct editing of JobId from int to int64 in fd_cmds.c
992 kes Eliminate FileSet name race with bash_spaces() and multiple
993 threads by bashing in a local.
994 kes Fix error return from 'use storage' to print a correct error
995 message rather than nothing.
996 kes Correct false re-read last block error message when two jobs
997 are simultaneously writing at the end of a tape.
998 kes Simplify exit conditions in the reserve.c code to avoid
999 possible non-release of reservation_lock().
1000 kes Suffle lock order in reserve to avoid deadlock between
1001 reservation lock and device mutex.
1003 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1004 tracking this down for me !!!! as it broke the Win32 build.
1006 kes Integrate addition of line count limitation to bsmtp -l from
1007 Sebastian Stark <stark at tuebingen.mpg.de>
1009 kes Implement regex test program in tools directory.
1010 kes Attempt to fix time problem with bsmtp with foreign langs.
1011 kes Add strip_trailing_newline() submitted by user.
1012 kes Implement regex matching in migrate.c
1014 kes Fix bug #537 to allow arbitrary time to mount a volume for
1015 restore, if polling is turned on.
1016 kes If dir_user or dir-group is specified in ./configure apply it to
1017 the working-dir. Fixes bug #533.
1018 kes If rescheduling a job cancel the previous incarnation with the SD.
1019 Fixes bugs #566 and 557.
1020 kes Fix bug #567 do_message() definition type conflict.
1023 kes Add more jcr methods and make mutex and use_count private.
1024 kes Create lock/unlock methods for jcr.
1025 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1026 records to get to seek position.
1027 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1028 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1029 terminates correctly by doing pthread_kill(). Do not destroy
1030 SD cond wait variable between executions of the job. Use local
1031 mutex for cond variable to avoid blocking jcr chain. Fix poor
1032 use of jcr use count in jobq.c for restarted jobs.
1033 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1034 lib/jcr.c -kes prevents locking the jcr chaing.
1035 kes Apply patch from bug #564, which corrects listing volumes with
1036 multiple autochangers. Apply same fix to next volume list.
1037 kes Fix bug #562 where restore bootstrap file is not unique.
1038 kes More details in implementing David's migration syntax proposal.
1039 kes Save and restore dcr when swapping drives so that if we have
1040 a write dcr it is not lost.
1041 kes Use new routine lock_reservations() to lock the reservations
1042 system, and call it while looking for a volume in askdir.c.
1043 This could possibly fix bug #543.
1044 kes Stop SD command loop if job is canceled.
1047 kes Remove old code from findlib/create_file.c
1048 kes Rename mac.c migrate.c
1049 kes Add user friendly display of VolBytes in job report.
1050 kes Rename target... to previous... to make it a bit easier to
1052 kes Add selection type and selection pattern to Migration (idea
1053 given by David Boyes).
1056 kes The po files should now be current.
1057 kes Fix new sql_use_result() code to properly release the
1058 buffers in all cases.
1059 kes Use the keyword ujobid to mean the unique job id; job or jobname
1060 to mean the Job name given on the Name directive, and jobid to
1061 be the numeric (non-unique) job id.
1062 kes Allow listing by any of the above.
1063 kes Add the user friendly job report code for reporting job elapsed time
1064 and rates with suffexes from John Kodis <kodis at comcast.net>.
1065 kes Add Priority and JobLevel as Python settable items.
1066 kes Use TEMPORARY table creation where the table is created by
1068 kes Add new code submitted by Eric for waiting on specific jobid.
1069 kes Add ACL checking for the dot commands.
1070 kes Fix restore of writable FIFOs.
1071 kes Fix a bug in bpipe where the string was freed too early.
1073 kes Modify the Python class examples to inherit object -kes new way
1074 of defining classes. Patch from Felix Schwarz.
1075 kes Implement jobuid to replace old usage of job in keywords as
1076 suggested by Eric Bollengier.
1077 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1078 wait (wait for all jobs to stop)
1080 wait jobuid=unique id
1082 kes Implement write variables for Python to set Priority (anytime), and
1083 Job Level, only during JobInit event.
1085 kes Fix the block listing bug pointed out by Arno.
1086 kes Update the po files at Eric's request.
1088 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1089 accept time qualifiers.
1090 kes Make catalog respect ACL.
1091 kes Add recycle count to Media record.
1093 Changes to 1.39.6-beta1 24Feb04
1095 kes Add Rudolf Cejka's new rc-chio-changer.
1096 kes Implement pulling Volume from Scratch Pool if the
1097 Volume is in the autochanger.
1098 kes Implement additional command arguments for update Volume.
1102 kes Back port changes to 1.38.5
1103 kes Fix recycle SQL for StorageId.
1104 kes Fix misplaced quote in mtx-changer script.
1106 kes Note. Your database must be updated, or you must create
1107 a new database. I have not yet incremented the database level.
1108 kes Add Location table.
1109 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1111 kes Implement create/get mac record in database for adding extended
1112 Migration data to the job record.
1113 kes Add new MAC table to update/make database scripts.
1114 kes Return Storage name used when getting VolumeNames for a job.
1115 kes Change bsr file keyword Storage to Device, which is more accurate.
1116 kes Ensure that Mac records are pruned/purged.
1117 kes Tweak SD tools to deal with changing media type.
1118 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1119 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1120 that the subroutine can switch devices, and hence dcrs.
1121 kes Modify the multiple MediaType read code to re-use the same
1122 dcr when switching devices. This makes the code much more
1124 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1125 from a table for restore.
1126 kes Add Storage name to VolParams, but it really should be Device.
1128 kes Add disk-changer to scripts directory + configure/Makefile
1129 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1130 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1131 kes Implement new store_bool that stores in a bool.
1132 kes Add true/false to yes/no conf directives.
1133 kes Make first cut at changing appropriate store_yesno to store_bool.
1134 kes Complete implementation of Pool storage devices.
1135 kes Move starting clones to job.c
1136 kes Move create_restore_bootstrap_file() to job.c
1137 kes Make copy_storage() more general to be able to handle
1139 kes Cleanup a lot of migration code for manual running, including
1141 kes Move getting a scratch Volume into a subroutine.
1142 kes Make all places a Volume that is added to a pool to
1144 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1145 kes Fix segfault in restore command when no value specified.
1146 kes Start adding code to handle multiple MediaTypes in restore.
1147 kes Eliminate race condition in getting Volume name for
1148 two drive autochanger.
1149 kes More debug code in autochanger.
1150 kes Add storage keyword to bootstrap file, add parsing.
1151 kes Move slot in bsr file into Volume record as there will be
1152 a different slot for each Volume.
1153 kes Create reserve.h
1155 kes Implement Pool storage overrides.
1157 kes Implement first cut of Migration.
1158 kes Implement mysql_use_result() from patch by Karl Hakimian.
1159 This reduces significantly the memory consumption during
1160 the restore tree building, and hence runs faster too.
1161 kes Implement StorageId patch supplied by user (reggie) in bug
1162 #536. This should permit Bacula to work correctly with two
1164 kes Implement Job listing variations suggested by a user.
1165 kes Move updating bootstrap code in backup.c to subroutine
1166 update_bootstrap_file().
1167 kes Add new job status elapsed time and bytes written user
1168 friendly job report output patch sent by John Kodis
1169 <kodis at comcast.ne>.
1170 kes Implement a storage list in Pools.
1171 kes Separate out setup_job() code from run_job().
1172 kes Get migration working -kes lots of changes in mac.c in both
1174 kes Apply patch from user (Eric Bollengier I think) that fixes a
1175 DIR crash when no arguments are supplied to a dot command.
1176 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1177 kes Fix command arg name->volume in label command of gnome-console.
1178 kes Fix SD acquire.c to release correct DCR by explicitly testing
1179 on the dcr address rather than trying to devine if it is a read
1180 or write dcr. This failed in error conditions when the device was
1184 kes Apply user supplied patch for more readable rate output
1186 kes Continue implementing migration.
1187 kes Implement support for removable filesystems in SD.
1188 kes Ensure that btraceback scripts can be read by anyone.
1189 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1190 kes Correct bug where canceling restore before the FD contacts
1191 the SD causes the drive to be left in read mode.
1192 kes Move ofline_or_rewind into DEVICE::close().
1193 kes Eliminate close_device.
1194 kes Convert several dev subroutines to methods (e.g. bsf,
1196 kes Eliminate force_close_device().
1197 kes Implement Device Type directive in Device resource that
1198 can have values File, Tape, Fifo, DVD, or Prog.
1199 kes Add has_cap() method to Device.
1202 kes Add patch from bug #527 to allow RedHat user to specify
1203 options/user/group for starting each daemon in
1204 /etc/sysconf/bacula.
1206 kes Add two new queries to query.sql provided by Arno. One
1207 list volumes known to the Storage device, and the other
1208 lists volumes possibly needing replacement (error, ...).
1210 kes Add periodic (every 24 hours) garbage collection of memory
1211 pool by releasing free buffers.
1213 kes Correct bug counting sized (for display only) in smartall.c
1214 kes Print FD mempool stats if debug > 0 rather than 5.
1216 kes Make db_lock() mutex error fail the job rather than abort
1217 Bacula. Canceling the job caused the mutex to fail.
1218 kes Correct bug in alist.c that re-allocated the list if the
1219 number of items goes to zero.
1220 kes Move the reservation system thread locking to the top level
1221 so that one job at a time tries all possible drives before
1223 kes Implement a reservation 'fail' message queue that is built
1224 and destroyed on each pass through the reservation system.
1225 These messages are displayed in a 'Jobs waiting to reserve
1226 a drive' list during a 'status storage='. Note, multiple
1227 messages will generally print for each JobId because they
1228 represent the different problems with either the same drive
1229 or different drives. If this output proves too confusing
1230 of voluminous, I will display it only when debug level 1
1231 or greater is enabled in the SD.
1233 kes Add enable/disable job=<job-name>. This command prevents
1234 the specified job from being scheduled. Even when disabled,
1235 the job can be manually started from the console.
1236 kes During 'update slots' clear all InChanger flags where the
1237 StorageId is zero (old Media records).
1239 Beta release 1.38.4:
1241 kes Fix autochanger code to strip leading spaces from returned
1242 slots number. Remove bc from chio-changer.
1243 kes Back port a bit of 1.39 crypto code to reduce diffs.
1244 kes Fix first call to autochanger that missed close()ing the
1245 drive. Put close() just before each run_program(). Fixes
1248 kes Add PoolId to Job record when updating it at job start time.
1250 kes Pull in more code from 1.39 so that there are fewer file
1251 differences (the new ua_dotcmds.c, base64.h, crypto.h
1252 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1253 util.c. Aside from ua_dotcmds.c these are mostly crypto
1255 kes Implement new method of walking the jcr chain. The
1256 incr/dec of the use_count is done within the walking
1257 routines. This should prevent a jcr from being freed
1258 from under the walk routines.
1263 kes Start implementing Verify list output.
1264 kes Move the suitable_drive flag to a better place to prevent
1265 premature termination of the reservation if all drives
1266 are busy -kes should fix Arno's diff/inc pool failures.
1268 kes Add mutex to single thread VSS code in Win32.
1270 kes Simplify code in askdir.c that waits for creating an appendable
1271 volume so that it can handle multiple returns from the wait
1273 kes Modify the wait code to permit multiple returns.
1274 kes Return a zero when 'autochanger drives' is called and
1275 it is not an autochanger.
1276 kes Make rewind_dev() a method taking a DCR as an argument.
1277 This permits closing and reopening the drive if the
1278 rewind fails as happens if the drive was loaded while the
1279 file descriptor was open. This refreshes the file descriptor.
1280 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1281 if the device is open or not. This should eliminate
1283 kes Return error if reserve cannot find at least one suitable device.
1284 kes Make wait_for_sysop() return correct state information.
1285 kes Fix Win32 state file problem. write was not using compat
1286 code. This should fix bug #500.
1288 kes Modify gui on command to set only GUI mode and not batch.
1289 kes Modify .messages command to always print messages regardless
1291 kes If GUI mode is on, suppress automatic printing of
1293 kes Delete old bnet packet code.
1294 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1295 wx-console. -kes not implemented because bconsole must be updated.
1296 kes Modify restore command in wx-console to set gui on and to use
1297 only .messages instead of messages. Hopefully this fixes bug
1299 kes Fix seg fault in exit of acquire when canceling a job --
1300 reported by Wolfgang Denk
1301 kes Pull in latest reservation system changes from 1.38
1302 kes Make .messages command always print messages regardless
1303 of the automessages flag.
1305 kes Fix seg fault if user labels a drive directory bug #513
1306 kes Remove quotes around Version as it breaks things.
1308 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1309 kes Apply sparse code fix for raw drives and fifos. Bug 506
1310 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1312 kes Correct reservation system to do a last ditch try
1313 for any mounted volume, then anyone anywhere.
1314 kes Add quotes around table Version because of
1315 error in MySQL 4.1.15 -kes bug report submitted.
1316 kes Correct some minor problems with btape in the fill
1318 kes Updates to ssh-tunnel from Joshua Kugler.
1319 kes Added a report.pl program from Jonas Bjorklund.
1320 kes Simplify the O_NONBLOCK open() code for tape drives,
1321 and always open nonblocking.
1322 kes Do not wait for open() if EIO returned (shouldn't happen).
1323 kes Eliminate 3 argument to tape open().
1324 kes Correct the slot # edited in the 3995 Bad autochanger unload
1326 kes With -S on bscan (show progress) do not divide by zero.
1328 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1329 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1330 kes Remove unused code in wait_for_device.
1331 kes Make wait_for_device() always return after 60 seconds of wait.
1335 kes Add stubs for non-crypto build.
1337 kes Use localhost if no network configured
1339 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1340 kes Remove debug print.
1341 kes Add bail_out in error during state file reading.
1343 kes Merge changes made to 1.38.3 into HEAD
1344 kes Add stubs for pygtk-console code
1345 kes Create Makefile.in for pygtk-console code
1347 kes Merge updates into 1.38 branch
1348 kes Update specs to include mysql4 define.
1349 kes Fix when attributes are sent, must be after binit().
1350 kes Stop read_record() if status not ok in second loop.
1351 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1352 and partial records in read_record(). This allows bscan
1353 to get FileIndex at EOT correct.
1354 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1356 kes Fix Win32 built to work with new crypto code.
1357 kes Apply patch supplied by user (slightly modified) to fix
1358 correct detection of holes in block devices and FIFOs.
1360 kes Apply patch supplied by user (slightly modified)
1361 to fix SD hang with multiple pools and bad client
1362 IP. Fixes bug # 508.
1364 kes Add nagios plugin to the examples directory. Submitted by
1366 kes Remove warning message about multiple saves of hardlinked files
1367 from find_one.c as it can generate too many warning messages.
1368 kes Modify most restore error messages to be queued so that they
1369 appear at the end of the job rather than mixted with the restore
1370 listing where they could be 'lost'.
1372 kes Reset timeout values before select() per patch from
1373 Frank Sweetser for problems with non-blocking sockets.
1374 kes Unlink the state file if either reading or writing it gets
1375 errors. Hopefully this will fix Win32 exit problems.
1376 kes Add sanity check in append.c to ensure that dcr is not NULL.
1377 This can happen if multiple drive autochanger SCSI control
1378 channel and drive indicies do not correspond.
1380 kes Get next volume from Scratch pool before creating a volume.
1381 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1382 kes Remove argument from create_bacula_database for SQLite as it
1384 kes Add back index code so that two drive autochangers can get
1386 kes Change a bunch of debug levels to aid debugging autochangers.
1387 kes Fix reservation so that mutexes are properly applied.
1388 kes Rework reservation algorithm so that two drives can be used
1391 kes Landon merged his data encription changes into the HEAD
1392 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1393 If this patch is applied, the number of days can be specified with
1394 'list nextvol days=xx'
1396 'status dir days=xx'
1397 My use case is to be able to preview the next scheduled job (and the
1398 next tape to be used) on fridays if there are no scheduled jobs during
1402 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1403 kes Fix malformatted bnet error message that caused seg fault
1405 kes Applied user patch to improve README.vc8 in src/win32.
1407 kes Add Migrate, Copy, Archive Job types (some where there)
1408 kes Correct some more editing of JobId's (for 64 bit compatibility).
1409 kes Ensure that StorageId is stored in Media record when ever possible.
1410 kes Add Migration Job to Job.
1411 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1412 Next Pool to Pool resource.
1413 kes Add more code to mac.c (migration archive copy).
1414 kes Change Start Storage daemon job to require read and write storage
1416 kes Pass read storage data to SD as well as write storage data.
1417 kes Remove old code from winservice.cpp
1418 kes Break on error in scan.
1419 kes Fix typo in signal.c
1420 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1421 kes Cleanup how find_device() works.
1422 kes Add read output to Status in SD.
1425 kes Add red-black btree routines
1427 kes Remove abs() in bfile.c so that it compiles on Solaris.
1430 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1431 kes Fix bnet-server bug found on OpenBSD. Bug #486
1432 kes Fix cancel failure bug. Bug #481
1433 kes Fix failure when Pool name has spaces. Bug #487
1434 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1435 kes Fix a couple of free()s in src/filed/acl.c
1436 kes Fix memory overrun in bfile.c in building OS X resource
1437 fork filename. Bug #489
1438 kes Add Pool name to SD status output.
1440 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1441 kes Make sure to set storage before trying to set drive.
1442 kes Add bacula_mail_summary.sh to examples directory. It makes
1443 a single email summary of any number of jobs. Submitted
1445 kes Make sure when we do a mount to unblock the device even
1446 if the drive could not be opened.
1448 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1449 and correct a few minor problems to make it build on Linux.
1451 kes Remove delete of CVS from all Makefiles
1452 kes Fix seg fault when clicking on Add button in wx-console
1453 restore panel. Bug #470.
1454 kes Fix copyright date and URL typo -kes bug #468.
1455 kes Change autostart install for FreeBSD to look for rc.conf
1456 rather than rc.local as suggested fix for bug #466.
1457 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1458 grant on status. Bug #465
1459 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1460 update script. Bug #464
1461 kes Tweak #ifdefing a bit in new Win32 stream code.
1462 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1463 kes Add documentation of performance #defines
projects / bacula / bacula / blob