1 Technical notes on version 2.2.x
6 kes Add JobId in place of Job name in all the Jmsg() output.
7 kes Correct the APP_DESC for the Win32 storage service (remove an e).
9 kes Add new SD despooling attributes and Dir inserting attributes
10 job status codes. This fixes bug #961.
11 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
13 kes Fix doc issue. This fixes bug #963.
14 kes Fix listing performance problems in bat. Pointed out by
16 ebl Fix replace on restore. This fixes bug #969
17 kes Fix bat code that tests for Win32. This should fix bug #968
18 kes Query 5 list wrong Vol after migration. This fixes bug #960
20 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
21 in back porting from 2.3.x
23 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
24 The details are included in the notes in this file.
26 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
27 messages; it fixes a problem opening the SQLite3 database when multiple
28 simultaneous jobs were running; it fixes a bug with certain versions of
29 MySQL where batch inserts failed because of table name character case
30 (upper/lower) differences.
31 kes Fix race condition that drops final block written to volume.
32 This happens in rare cases with multiple simultaneous jobs
33 when the Volume fills. This fixes bug #964. May be related
34 to bug #935 and possibly #903.
36 kes Fix FD->SD authorization failure, which was due to spurious
37 wakeups from a pthread_cond_timedwait(). Simply check the
38 predicate before continuing. This fixes bug #953
39 dvl Add new configuration item --archivedir
40 dvl Adjust regression tests to use tmp not /tmp. This will allow
41 multiple concurrent runs of the regression tests.
43 kes Fix race condition that drops final block written to volume.
44 This happens in rare cases with multiple simultaneous jobs
45 when the Volume fills. This fixes bug #964. May be related
46 to bug #935 and possibly #903.
47 kes Eliminate more strerror() and replace with bstrerror().
48 kes Remove BSD getopt and replace with unrestricted IBM version.
49 kes Fix Win32 build for changed calling sequences.
51 kes Fix FD->SD authorization failure, which was due to spurious
52 wakeups from a pthread_cond_timedwait(). Simply check the
53 predicate before continuing. This fixes bug #953.
54 kes Add const char where needed (more to do).
56 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
57 kes Don't overwrite error message in check_tables_version.
59 kes Unlock batch insert tables with same calls used elsewhere.
60 kes Allow starting 59 jobs a second.
61 kes Make SD session key more random.
62 kes Add retry for SQLite opening db if it fails. Probably helps
64 kes Suppress extra error messages during batch insert failure.
66 kes Put some FD auth code on dbglvl rather than fixed.
67 kes Return insert attributes error message in db msg buffer to avoid
68 false error messages. Helps fix bug #966.
69 kes Separate batch init error messages. Probably helps fix bug #966.
70 kes If Dir gets an error during inserting attributes, cancel SD.
71 This reduces unnecessary error messages.
73 ebl Cleanup batch insert code. Probably fixes bug #965.
75 kes Turn off some code when batch insert not enabled.
76 kes Edit FD name in connect error messages.
78 kes Add code to handle tray monitor separated from Win32 FD.
79 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
81 kes Fix ANSI tape labeling. This fixes bug #954.
82 kes Increase the max block size to 4MB fixes bug #957.
83 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
84 is not properly mounted (recognized) during a poll.
85 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
86 Job that has differences reports Verify OK.
90 kes Increase size of name string when FD making connection to SD.
93 kes Add code to try to fix bug #908.
94 kes Add waits to multiple exit detection code to try to force pid
95 file to always be deleted.
96 kes Restore good dev.tar.gz to rescue set appropriate binary property.
98 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
99 trying to switch drives by checking for blocking before unblocking.
101 kes Cancel storage daemon in all cases where FD reports error. This
102 should fix virtually all cases of bug #920.
104 kes Fix error message that was clobbered when Dir tells SD it does not
105 have write permission on Volume. This should fix a minor point
106 in bug #942, but not the main problem.
107 kes Add code to cancel job in SD if FD connection fails. This should
109 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
110 kes Fix migration code to get correct Volume name with multiple volumes
111 by skipping |. Fixes bug #936.
112 kes Implement patch supplied by Landon to fix bug #944 where using
113 TLS with bconsole uses 99+% of the CPU.
114 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
116 kes Move patches into patches directory.
118 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
121 ebl Using "m" in bconsole will show messages like before,
122 and not memory usage.
124 Release Version 2.2.3
125 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
128 kes Fix bug #935, and probably also bug #903 where files were not
129 restored. MediaId was not properly set in JobMedia record after
132 kes Add ./configure search in qwt-qt4 for qwt package
133 kes Apply Martin Simmons patch that should turn off the new API usage
134 when batch insert is turned off allowing building on older
137 Release Version 2.2.2
139 ebl Detect if new PosgreSQL batch insert API is present.
140 kes Correct incorrect mempool call causing Director crash.
141 sb Update spec files for 2.2.1 release
143 Release Version 2.2.1
145 kes Update POTFILES.in
146 kes Cleanup a few underquoted AC_DEFUNs in configure
147 kes Apply patch from Martin Simmons that adds a test for va_copy to
150 kes Fix bug 921 by increasing the number of tries to create a new volume
152 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
153 can be called multiple times. Implement a version for machines
154 without va_copy() that gets a big buffer.
156 kes Integrate more portable zone offset code into bsmtp.c
157 Submitted by Attila Fülöp.
159 kes Fix bad SD->FD return status reported by
160 (James Harper) <james.harper@bendigoit.com.au>
161 ebl Fix a bug in read_close_session which return random status
162 thanks to James Harper
164 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
165 and directory names during restore of single file/directories.
166 kes Add sanity checks to .sql command when string is empty. Hopefully
167 that will resolve Dirks Director crash.
169 kes Apply patch submitted by Martin Simmons that corrects a seg fault
170 in the bsmtp chat subroutine when debug is >= 10.
172 kes Fix Director crash when running bat SQL queries.
173 kes Add David's notes on Item 8: Copy pools.
175 kes Rework projects file to be current and ready for a vote.
176 kes Enhance lex scanner error message.
178 kes Tweak LICENSE file to mention BSD code.
179 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
180 if specified on the ./configure.
181 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
182 This class is intended to allow us to open a second bsock to the
183 Director while in the restore subdialog.
185 kes Fix configure to create bat Makefile before creating dependencies.
186 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
187 kes Add a tooltip to the tray monitor.
188 dvl Set the Director's PID file before dropping privs. This fixes
191 kes Update AUTHORs file
192 kes Increase the default max concurrent jobs to 20 in FD and SD to
193 correspond with the default .conf files.
194 kes Rewrite the Win32 service routines. This eliminates the 3 copies
195 some different, of the same file created by RN when porting the
197 kes Rearrange some of the Win32 directories and the placement of the files
199 kes Set DEVELOPER flag in version.h
201 ========================================================================
202 Release Version 2.2.0
204 kes Apply a second doc patch from Marc.
205 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
206 improves the tips section that discusses how to setup multiple
209 kes Update bat README file.
210 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
211 corrects a typo in the Recycle status check in db_find_next_volume().
212 This will probably fix a number of annoying problems with multiple
214 kes Modify most of dird/msgchan.c to use bsock class calls rather than
215 bnet calls -- no functionality change.
217 kes Modify the Verify output to specify if files are missing on
218 the Volume(s) or disk. Fixes confusion in bug #916.
219 kes When more than one Volume is read in a migration job, the last
220 Volume bytes reported are from the last read volume rather than
221 the last written volume. Fixed. This fixes bug #910.
222 kes Fix display of Recycle flag after update volume=foo recycle=yes.
223 It previously printed New Recyle flag is: no. This fixes bug
226 kes Correct seg fault when switching tape drives during restore.
227 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
228 be used until after 2.2.0 release.
230 kes Remove fnmatch() in SD that permitted wild card specifications.
233 kes Fix %g in filename returned by SQL for browse tree reported by
235 kes Fix configure so that it puts config.out in the cwd rather than
237 kes Attempt to fix the locking problem reported by Eric in bug #906.
238 kes Make berrno class to leave errno unchanged after constructor call.
239 kes Make bnet_server use the heap rather than the stack to allocate
240 its socket fd pointers to avoid a crash at termination. Problem
241 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
243 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
244 and putting it in depkgs-qt along with Qt4.3.
246 kes Rework code in acquire.c that switches drives for reading when
247 the Media Type does not match. This should fix bug #906
249 ebl Fix a director segfault during job setup #907
250 kes Correct seg fault in postgresql when first operation returns no
251 rows. Fixes Dirks File browser problem seg fault with bat.
253 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
254 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
257 kes Implement PopUp YES/NO dialog for bat.
259 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
261 kes Correct RunScript to terminate job in FD on failure.
262 kes Change abort_on_error and AbortJobOnError to fail_on_error
263 and FailJobOnError in RunScripts.
264 kes Minor tweaks of code formating in RunScripts, principally to
265 avoid depassing 80 columns.
267 kes Eliminate one #ifdef Win32 in bsmtp
268 kes Implement grow tool to grow a file for testing very large databases.
269 kes Add big-vol-test to test Bacula seeking with > 5GB.
272 kes Modify find_next_volume() to return all values in Media record.
273 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
277 kes Update Release notes
279 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
280 Warning, in previous beta version, all media get from scratch keep their
283 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
284 This should fix bug #842. Made a note to look at removing the temp
285 files at the end of the install.
286 kes Add ability to mount and unmount a file device providing it is
287 marked as being removable and has the appropriate mount and unmount
288 commands defined in the Device resource. This fixes bug #830.
289 kes When applying a storage override, release all previous storage
290 definitions rather than just prepending the new storage.
291 This should prevent a good deal of confusion.
293 kes Implement ./configure search for qwt libraries.
295 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
296 Win32 FD. This should fix bug #893.
297 kes Remove an unnecessary beep in Win32 init code.
298 kes Update copyright dates in Win32 executable about boxes.
299 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
300 code with a BSD getopt.c and getopt.h.
301 kes Remove sched.h from the Win32 compat directory -- not used.
302 kes Remove the Exit menu item from the Win32 tray monitor. If you really
303 need to shut it down, do it through the services panel or the command
305 kes Remove some inappropriate Bacula FSFE copyrights.
306 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
307 kes Fix regress config non-portable test as pointed out by
308 Florian Heigl <florian.heigl@gmail.com>
309 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
310 as pointed out by Florian Heigl <florian.heigl@gmail.com>
312 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
313 Reported by Frank Sweetser.
317 kes Fix client-only build.
318 kes Integrate client-only fixes for bsys (initgroups) and conio from
319 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
320 kes Make arguments to get_scratch_volume() in same order as other
322 kes Rework the prune_volumes() subroutine so that after purging and
323 no volume found in desired pool, it will check for a scratch
324 volume. This prevents recycling the whole scratch pool.
325 kes Add code to status storage to print boffset_t (largefile support).
327 kes Move qwt (Graphics libarary for Qt4) to depkgs.
328 kes You now need a --with-qwt=<dir> to be able to build bat.
329 kes Update src/win32/cats/bacula_cats.def to include the new
330 db_get_query_dbids() call on Win32.
332 kes Correct a problem when selecting a scratch volume and moving
333 it to another pool that lost some columns.
334 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
335 kes Enhance Autochanger error messages to include Volume and device name.
336 kes Rework prune_volumes() code to take account of InChanger flag,
337 and to handle recycling volumes going to the Scratch pool and
338 current pool because the RecyclePool directive.
339 kes Implement a better and more efficient db_get_query_dbids() to
340 handle creating and passing back a list of DBIds.
344 kes Start work on new more efficient DBId subroutine. First use
345 will be for recycling volume to Scratch inchanger.
346 kes Increase number of JobIds in pruning from 1000 to 10000.
347 This to be replaced by above routine.
348 kes Begin implementation of building Qt4 on Win32.
349 kes Correct typo in fix I added for bad TLS shutdown.
350 kes Pull 2.0.3 patches into patches directory.
351 kes Update Release notes. Include qt-console in line count.
352 kes Update Projects file.
354 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
355 bug in migration code where a job that spanned two volumes
358 kes Implement new BST_DESPOOLING blocked state. Change from locking
359 during despooling in SD to blocking. This means that other threads
360 can work with the device structure, in particular the reservations
361 system while despooling.
363 kes Fix return in reservation message queue that missed clearing
364 the jcr lock (implemented 26Jun07 below).
365 kes Rename a number of dev methods to make locking function names
367 kes Document locking in lock.c. Move lock structures to new file
370 kes Move reservations message lock to lock jcr only this
372 kes Move main SD locking code into lock.c (new file).
373 kes Update Win32 build to include lock.c
377 kes Dirk committed the qwt library code for drawing graphs in bat.
378 kes Tweak install of qwt so that it is integrated with ./configure.
380 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
381 out by Eric (my typo).
382 ebl Fix configure.in to get batch mode enable
383 kes Return correct string from authenticate.cpp in bat when connecting
385 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
386 spurious line drops when using TLS.
387 kes Do not file reparse points when restoring a file that already
390 kes Implement Windows reparse points -- similar to directories, but
391 we do not descend into it. This is a first cut. They seem to
392 be backed up, but restore is not yet tested.
393 kes Remove restore_blocking in tls code when shutting a socket to leave
394 it in blocking mode. Hopefully this will fix the encryption bug
395 reported by Frank Sweetser.
396 kes When opening a file for backup, tell the OS that we are going to
397 read it sequentially -- optimization.
398 kes Change variable names in authenticate_director() to not conflict
399 with member names in bat. Caused great confusion with compiler,
402 kes Queue openssl error messages in case of comm problem.
403 kes Do shutdown() call if socket terminated.
404 kes Remove some duplicated code in tls.c
405 kes Move more of the bsock member variables into private and access
407 kes Add Frank Sweetser's tls-test to the regression suite.
409 kes Add Swedish sv.po file
411 kes Don't print clock skew message in FD if less than 3 seconds diff.
412 kes Add a bit of VSS info to status client.
413 kes Implement a first cut of Vista VSS, using Win2003 code.
418 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
419 loaded tape but uses first drive).
420 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
421 This was indeed a Win32 issue.
423 kes Simplify search of autochanger for in-use Volume.
424 kes Fix exit condition of check for in-use volume. kes Remove
425 inappropriate my_postgresql_free_result() in db_close()
427 kes Fix bad return in FD when encryption signature not found.
428 Probably caused a crash.
429 kes Inhibit missing encryption signature error messages for
430 file types where no signature computed.
431 kes Correct inverted check on autochanger in reservation system.
432 kes Tweak debug code in autochanger reservation.
434 kes Add some additional locking in the cats directory in subroutines
435 that modify packet variables called from batch insert.
436 kes Rework how dcrs are allocated. new_dcr() can now be called
437 with an existing pointer, and it will simply clean it up.
438 This allows the reservation system to test various different
439 devices, and will permit easy device changes.
440 kes A bunch of changes all over to handle new new_dcr() calling
442 kes Work more on the Volume management in the SD. Remember Volumes
443 for tape drives and for autochangers (even virtual disk changers).
444 kes When looking at the Volume list to reserve a drive, handle
445 autochanger names correctly by interating through the changer
446 devices. Also call the Director to see if a Volume is suitable
448 kes Fix some bugs in bscan. Make sure all media records are written.
449 Make sure that valid JobMedia records are written for disk files.
450 Previously they were completely wrong.
451 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
452 that the URLs don't change and so that the developers will all
453 work off the same copy. Rebuild from scrach.
454 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
458 kes Fix seg fault in FD from incorrect digest size.
459 kes Fix argument to non-OpenSSL crypto.c subroutine.
463 kes Remove a few malloc()s from the encryption code.
464 kes Use the class calls to bsock in filed/backup.c and restore.c in
465 place of the old bnet_xxx code.
466 kes Implement code that does an on the fly calculation of the
467 signing digest during restore of encrypted files. It makes
468 a best guess at the algorithm, and if it is not correct, will
469 then revert to the old code which reads the file after it is
471 kes Implement at least one missing crypto stream in stream_to_ascii()
472 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
473 #877 where a reload with bad syntax causes Dir to exit.
475 Cut: 2.1.14 beta (not released)
477 kes Do not free a volume on a tape drive until another volume is
478 mounted and read, or the autochanger unloads the volume.
479 This should help the SD re-use volumes that are already mounted,
480 and should fix bug #886.
481 kes Apply patch from user brettedgar that allows gnome2-console include
482 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
483 kes Apply patch from Lucien Weller that fixes day of week calculation
484 because of DST flag problem. Fixes bug #887.
486 kes Move find_next_appendable_volume() to after acquiring a valid device
487 in reserve.c. This fixes bug #864 -- confirmed by reporter.
489 kes Unable to reproduce bug 872. However added additional testing for
491 kes Bug #874 resolved by documenting SQLite limitations.
492 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
493 kes Bug #881 resolved by removing typo in mtx-changer script.
494 kes Made Frank Sweetser's wiki the official Bacula wiki with his
495 approval. Added a link to the wiki on the web page, and implemented
496 a backup from http://paramount.ind.wpi.edu
498 kes Fix update allfrompool to pass pool name.
500 kes Convert to pure GPL v2 license.
501 kes Fix sscanf problems reported by Peter Buschman that caused
502 a bus error on Solaris.
503 kes Rework (simplify) the select prompt in bat.
504 kes Move get_jobid_from_tid() into lib and create a
506 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
507 should definitely fix the problem of lost error messages in the
509 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
510 kes Eliminate tcpd.h from the project. Enclose the #include from the
511 library with extern C ...
512 kes Add print of signal name when a signal is trapped.
516 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
518 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
519 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
520 makes SQLit3 run 30 times faster, though a bit less safe.
521 kes Implement --with-batch-insert in configure and detection of thread
522 safe libraries. It is on by default, but turned off if no thread
523 safe library (e.g. SQLite 2) is available.
525 kes Fix Bacula PostgreSQL buffer overruns.
526 kes Do better checking for NULL results returned from PostgreSQL;
527 implement retry for failed queries; clear results buffer after
528 failed query. Hopefully this will correct the PostgreSQL failures.
530 kes Implement algorithm to handle only one appendable volume with
531 Prefer Mounted Volumes = no.
532 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
533 returned from a query.
534 kes Make volume lock recursive.
535 kes Implement an additional volume reservation algorithm that
536 starts by considering all reserved volumes then uses the
537 old brute force algorithm of searching the resources to
538 find a suitable device.
539 kes Add new reservations debug code and refine the old code.
540 kes Update the win32/dll/bacula.defs file.
542 kes Tweak reservations algorithm to permit a few more cases, i.e.
543 volume reserved, but on different drive, ...
544 kes Enhance SD status to include Pool and Media Type for drive in a
545 more readable format (a bit longer).
546 kes Fix PostgreSQL double free.
548 kes Minor refactoring of restore decryption code.
549 kes Add code to smartall.c to detect double free of a buffer.
551 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
552 so that bsmtp will create a correct email address (mailbox only).
553 kes Modify 'memory' command so that the buffers are listed as 'In use'
554 to avoid confusion with Orphaned buffers.
555 kes I reworked the OpenSSL include/lib flags to be handled in
556 the standard Bacula way, which should fix bug #863 concerning
557 non-standard OpenSSL libraries.
559 kes Implement Help Browser window for bat.
560 kes Fix reload bug that reset StorageId to zero.
562 kes Fix TLS #ifdefing when TLS turned off.
563 kes Ensure that when labelling a tape with Slot=0 that InChanger
565 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
567 kes Add StartTime to final uar_sel_jobid_temp query so that we can
568 add DISTINCT (required by PostgreSQL).
569 kes Implement BSOCK authenticate_director() method. Eventually will
570 authenicate all daemons.
571 kes Move several more functions into the BSOCK class.
573 kes Add code to tell the OS that we no longer need a cached
574 file that we were reading. In findlib/bfile.c. Also,
575 only cache files that we are reading. Thanks to
576 Tobias Oetiker <tobi@oetiker.ch> for the idea.
577 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
578 kes Implement script to automatically generate cats and dll .def
580 kes Update README.mingw32 to include new .def file generation.
581 kes Correct typo in UTF-8 error message as reported by:
582 jhernandez <julianhernandez@gmail.com>
583 kes Add additional sm_check() code on debug level 1.
584 kes Set default debug level to 1.
585 kes Trap SIGABRT in attempt to get traceback.
587 kes Reduce bat connect timeout from 30 to 15 seconds.
588 kes More restructuring and implementing BSOCK class in place of
590 kes Remove a few unnecessary malloc() tests in crypto code.
591 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
592 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
593 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
595 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
597 kes Fix Verify InitCatalog. The attributes were not pointing to the
598 correct saved location.
599 kes Implement message callback so that GUI is sure to get all
600 daemon messages. Currently displayed in a dialog in bat.
601 kes Ignore SIGUSR2 (Bacula timer) in bat.
602 kes Apply regress patch from bug #859 to allow regress to work
603 with Solaris compiler.
605 kes Begin adding TLS support to bat.
606 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
607 clean up lex.c and make it more readable.
609 kes Move more bnet functions into the BSOCK class.
610 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
611 kes Complete change of berrno strerror() method to bstrerror()
615 kes Cleanup incorrect email addresses in bsmtp.
616 kes Make bat display initial messages rather than discard them.
618 kes First cut of adding .mod to the run command.
619 kes Implement auto display of messages in bat.
620 kes Enhanced preferences to allow all Bacula output to be
623 kes Fixed bug #856 autochanger documentation.
624 kes Rework bsmtp date editing for Win32. This fixes bug #854.
625 kes Add new cats entry point so Win32 builds.
627 kes Attempt to fix bsmtp date editing on OSes without %z editing.
628 kes Do better checking for the MySQL 64 bit libraries looking for both
629 .a and .so libraries.
630 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
631 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
632 kes Require the thread safe version of MySQL during configure. Thanks
633 to Andre Noll for pointing this out.
634 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
635 continuing in migration code.
636 kes Apply implementation of tray-monitor font derived from gnome-console
637 submitted by Andreas Piesk <a.piesk@gmx.net>
639 kes Eliminate important memory loss in SQLite
640 kes Fixed the batch insert MySQL thread specific data that was not
641 being freed. See cats/mysql.c:db_thread_cleanup().
642 kes Fix restore before command.
643 kes Convert old hdr.name to name() in a few places.
644 kes Implement update jobid command.
645 kes Return all time_t dates in db_get_job_record()
646 kes Stop watchdog in SD earlier.
647 kes Put Pool just after Storage in please mount message.
648 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
651 kes Update the po files.
652 kes Fix Verify InitCatalog by making it cache attributes.
654 kes Change name bacula-bat to bat for man 1 page to correspond to
656 kes Check for client and store NULL pointers in status command. This
658 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
659 kes Fix sign extended editing of %p.
660 kes Clean out a little old #ifdefing in cats/mysql.c
662 kes If time diff between DIR and FD is more than 600 seconds convert
663 INFO message to WARNING.
664 kes Implement heap size display in status for all daemons.
665 kes Attempt to fix MySQL db open memory loss (not successfull).
666 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
667 kes Eliminate memory loss in MySQL (possibly other SQLs) during
668 Query. This looks like a MySQL but but by doing extra releases,
669 the memory goes away. This should fix bug #847.
671 kes When backup fails, cancel SD before waiting for sd termination.
672 kes If SD is waiting for FD to connect during cancel, wake up the
674 kes Fix fsf code so that errno is correctly reported.
675 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
677 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
678 the original jobb's FileSetId.
679 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
680 spooling in migration jobs. Not yet tested.
681 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
682 reading conf file from a pipe. However, do it with open_bpipe()
683 rather than popen. Not yet tested.
685 kes Fix an ugly bug where the VolCatBytes were getting updated
687 kes Implement bconsole memory command that prints current memory
688 usage, plus smartalloc dump.
689 kes Clarify some error messages in backup, admin, and migrate.
690 kes Shrink label dialog to smaller size.
691 kes Invert Cancel OK buttons on restore to be OK Cancel.
692 kes More strerror() to bstrerror() conversions.
694 kes Start implementing bstrerror() in place of strerror().
695 kes First cut at stripping path -- seems to work.
697 kes Prevent door and port files from being restored (mostly
699 kes Free an unreleased buffer in compat code.
700 kes Change console Job name from *Console* to -Console- to eliminate
701 Win32 filename problems. Put Win32 path separator when creating
702 Console file. This fixes bug #846.
703 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
705 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
707 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
708 to force Win32 error message.
710 kes First cut strip path. The data should be passed to the FD,
711 but nothing is done with it yet.
712 kes Enhance the digest and signature routines in the crypto
713 library to accept a JCR and to use it to print error messages
714 so that they will go in the Job report rather than the daemon's
716 kes Simplify some of the verify signature code.
717 kes Simplify a few of the alternative returns in the signature
720 ebl Use only POSIX regex instead of GNU regex in breg.c for
721 File relocation. It fix broken freebsd compilation.
722 kes Convert all other Dir files to use ne ua class message
724 kes Tentative fix for missing digest signature in bug 807.
725 kes Correct handle problem in new win32_ftruncate routine.
726 kes Convert ua_purge.c and ua_update.c to use new ua class
727 message routines for bat.
729 kes Correct incorrect installation of LICENSE in Win32 installer.
730 kes Display LICENSE at the beginning of the Win32 install.
731 kes Attempt to correct the need for the png files to be installed
733 kes Reapply my bat.conf install script in qt-console. I think I
734 editted bat.pro instead of bat.pro.in and it was lost.
735 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
736 the /var/lock/subsys for subsysdir. Also corrects typos in the
739 kes First cut update job.
740 kes Correct configure to include qmake of src/qt-console directory.
742 kes Make restore job yes/mod/no print in one command so GUI works.
743 kes First cut implementing backup and restore client.
744 kes Correct editing in Verify output that caused a seg fault.
746 kes Insure that bat.conf is not overwritten during installation.
747 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
748 while I was implementing migration in March 2006 !
750 ebl Cleanup file relocation, using char *RegexWhere instead of
751 char *where + bool where_use_regexp
752 kes Update some manpages and add bat manpage.
753 kes Make a first cut at converting bacula.spec.in for bwx-console
755 kes Apply patch from John Goerzen to add hostname as fourth argument
756 to make_catalog_backup script.
757 kes Fix typos I introduced into bsmtp.c
758 kes Make pm_strxxx() routines handle input of NULL pointer. This
759 is to protect from NULL pointers returned from SQL databases.
760 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
761 kes Add more debug to FIFO code -- fix fifo regression test.
763 kes Implement posix_fadvise in FD, and for reading spool files in SD.
764 kes Add thread timer to bnet_connect() to break from OS if wait time
767 kes Update Win32 build to include new files, new symbols, and
769 kes Implement socket level heartbeat (tcp_keepidle)
770 ebl Commit File relocation patch
771 kes Make bat have 'make install' target.
772 kes Warn during install if old gnome-console binary found.
773 kes Warn during install if old wx-console binary found.
774 kes Add -8 option to bsmtp command line to add content type utf-8.
775 Fixes bug #809. (Character coding problem in bsmtp).
776 kes If < is found in target (from, to, cc) then do not enclose the
777 target in < > in bsmtp. Fixes bug #772 (malformed address).
778 kes When printing certain items in dbcheck, stop after 300000.
779 Fixes bug #822. (dbcheck loops).
780 kes Incorrect status in Dir after waiting for mount with poll set.
783 kes Extend idea of Prefer Mounted Volumes to mean a volume about
785 kes Print waiting to reserve a device every 5 mins.
787 kes Don't call close_part in label.c if tape and relabel.
788 kes Don't free volume if busy in close() -- should help with
790 ebl Fix #824 RunScript bug (After script could be execute twice)
791 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
792 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
793 Add a regression script to test RunScript
795 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
798 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
799 deprecated. No additional bugs will be fixed, and they will be dropped
800 in a future release (probably 2.4.0).
801 kes Change name of wx-console to bwx-console to make it more Bacula
803 kes Change the name of gnome-console to bgnome-console to make it
806 kes Some time in March, a Feature Request with patch from Jorj Bauer
807 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
809 The ability for the director to validate a Client (FD) CN against
810 an arbitrary set of patterns rather than the hostname, with
811 A new 'TLS Allowed CN' set of directives which are implemented
812 in the Client resource. Then pattern matching is used in place
813 of hostname matching against the Certificate's CN. As an example, we
814 have certificates which (a) use a local CA, and (b) have a CN of the
816 kes Add new/changed entry points to Win32 build
817 kes Create unaccepted-projects for projects that are not accepted.
818 kes Simplify locking in the reservations system.
819 kes Add more debug code in reservations.
820 kes Make sure error condition on reserving a volume is handled correctly.
821 kes Correct handling of volume_in_use.
822 kes Correct handling of initializing a device.
823 kes Move handling of broadcasting releasing a device into release_device().
824 kes Correct attaching dcr to dev so that it is only done if device
825 is properly initiated.
827 kes Locking debug level tweaks in SD.
828 kes Tweak new Volume code.
830 kes Add exec external-command [wait-seconds] to bconsole. This
831 executes the external-command. Note! normally external-command
832 should be enclosed in double quotes.
833 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
834 it should normally be off in a production system.
836 kes Implement die command for SD so that we can force it to dump.
837 kes Implement SD lock debug code.
838 kes Implement new algorithm for keeping Volume list in SD. It
839 is now owned by the device.
841 kes Implement new code for freeing in use volumes that should
842 resolve if not all, some of the problems of multiple drive
843 tape conflicts described in bug 801.
845 kes Fix gui/bacula-web/images files in svn.
846 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
848 ebl Fix a bug in batch mode (in string escape)
849 kes Correct migration prune SQL typo that crept in in a
852 kes Move bnet_despool() into class in bsock.c
853 kes Modify job report to include director name and Build OS.
854 kes Move drop root privilege and check_catalog() before fork.
855 kes Add update database scripts (version 9 to 10) to updatedb directory.
857 ebl Check size and age of each file after its backup to see if
858 it has changed during backup, if 'checkfilechanges' is set.
859 The FD will do an extra check (stat(2)) after
860 each file backup. mtime, ctime and size are compared with
861 'before backup' information. If time or size mismatch, an
862 error message will be generated. You must upgrade FD to use it.
864 kes Make database name and user configurable
865 --with-db-name=xxx --with-db-user=xxx
866 kes Add back database type to message.c for debugging.
868 kes Implement dir_sql() which issues an SQL query.
869 kes Modify bat medialist to use dir_sql() and do some minor C++
870 formatting as well as eliminating a number of pointers, simplifing
873 kes Fix some of the mtx-changer grep commands for tape label readers.
874 kes Convert a number of bsendmsg into the appropriate send/warning/error
876 kes Suppress the using database message in the .sql command.
877 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
879 kes Add context menu for floating a window.
880 kes Some minor cleanup and name changes in qt-console
881 kes Add doing mt setblk 0 in Win32 mtx-changer.
882 kes Apply Martin's bug fix to move definition of ENODATA for
884 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
887 kes More pruning cleanup.
888 kes Turn on wait_for_drive by default in mtx-changer.
889 kes Turn on Batch insert code by default as it now passes regression.
890 kes Add ./configure --enable-bat to enable building of Bat.
891 No install yet though.
893 kes Implement a new .sql command for bat.
894 kes Implement code to turn off pruning in obtaining the next volume.
895 Pruning is turned off for the status dir command, but turned on
896 for SD requests and for the list nextvolume command.
898 kes Correct Qmsg() that was not updated correctly when committing a
899 previous change (probably the recent TLS patch).
901 kes Write new subroutine is_volume_purged() that explicitly checks
902 if the Volume is purged, and if so marks it as such. This should
903 resolve problems reported about needing to mount twice to recycle
905 kes Rewrite pruning algorithm to do more work in the SQL engine, and
906 to pass a list of JobIds to be deleted to SQL. Also, minimize the
907 amount of duplicated code.
908 kes Do volume pruning only for the Media Type desired (reduces pruning time
909 if multiple Media Types are in the same pool).
910 kes Implement more detailed info in the Job report for the Bacula version
912 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
914 ebl Add bbatch tool to bench database and insert mode.
915 Fix sql quote stuff in batch mode
916 Fix sql stuff for mysql
918 kes Correct problems with am/pm scheduling. Fixes bug #808.
919 kes Implement new prunning code that prunes up to 1000 jobs at
920 the same time. The same technique can be applied to a number
921 of other prune/purge subroutines.
922 kes Add an insanity check when starting a new tape job to ensure
923 that the tape position has not been changed. If so fail the
925 kes Fix Win32 build for dlls to add the folllowing:
926 src/lib/bsock.c -- new file with new entry points
927 src/lib/dlist.c -- new entry points
928 src/cats/sql_create.c -- new entry point
929 src/cats/sql_cmds.c -- new DATA item exported
931 ebl batch mode cleanup bscan-test is ok now.
932 kes Implement SD code to check length of disk volume before appending.
934 kes Correct return status on db_batch... routines.
935 kes Add call to db_write_batch_file_records() to migration code.
936 ebl Fix AfterJob timing
937 kes Move the checking of the database in initializion of the Director
938 to after we drop privileges. This avoids the need for both root
939 and bacula access to the DB.
940 kes Correct a misplaced variable definition in src/filed/backup.c
941 kes Correct how the new batch insert db_create_attributes_record()
942 uses the arguments. Caused a seg fault in bscan.
943 kes Implement lock() and unlock() methods in DEVICE class.
944 Implement block() and set_block(xx) methods in DEVICE class.
945 kes Modify bnet_connect() so that it uses time() to check for the
946 wait time expiring (on some OSes, some system calls may not
948 kes Modify Verify to obtain the previous JobId when it is actually
949 running rather than at schedule time (as it was in 1.38.x).
950 kes Fix src/job.c to handle MaxWaitTime correctly. This should
952 kes When checking pid in pid file, continue running if the pid is
953 the same as ours. This occurs on IRIX after a system crash.
956 kes Extend new GUI API.
957 kes Make the ua structure a class, and implement send_msg(),
958 error_msg(), warning_msg(), and info_msg().
960 kes Apply fix from for building wx-console on the Mac from
962 kes Implement new select mechanism for GUI programs.
963 kes Reorganize initialization of stackedWidgets in bat.
965 kes Add updated nagios plugin supplied by Christian Masopust.
967 kes More bat implementation.
968 kes File migrate bug with Pool Occupancy using mediaid instead
969 of jobids. Fixes bug #795.
970 kes Fix orphaned buffers in filed backup and verify due to
971 crypto buffers not freed during errors. Fixes bug #789.
972 kes Extend new GUI api code to tree commands.
973 kes Ensure that tree and dot commands check console ACLs.
974 kes Permit marking directory with trailing slash.
975 kes Allow 20 console connections (instead of only 10).
977 kes Add smartctl call to bacula-sd.conf as an example of getting
980 kes Modify jobq.c to let simultaneous restore jobs run. This may
981 cause them to fail if they cannot get a drive.
982 kes Add Client Connect Wait to Storage daemon to permit users to
983 modify the time the SD waits for a FD connection.
985 kes Correct virtual changer check which was backwards. This caused
986 volumes to be unloaded into slots already occupied.
988 kes Apply Command ACL filter to JobId list in restore command.
989 kes Correct typeo in var.c patch.
991 kes Don't let Bacula prune File or Job records for the current Job.
992 kes Fix variable substitution pad + inc bug reported (with patch)
995 kes Correct SQLite log table index as reported by Luca Berra.
997 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
999 kes Begin implementing new comm signals for API.
1000 kes Fix a few places in lib/message.c where the open fd may
1002 kes Continue implementing lib/bsock.c (real class). Make jcr,
1003 who, host, and port private. There are new methods to access
1004 them for non-class use. This required touching a number of files.
1006 kes Add LANG=C to autoconf/randpass so it works with languages other
1007 than English. Fixes bug #788.
1009 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1011 You will not be able to generate Include/Exclude list any more.
1012 It will be fixed soon.
1013 If you want to use this, you can apply
1014 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1016 kes Restore of sockets created false error messages because Bacula
1017 no longer restores sockets, but the code was still trying to
1018 set the attributes on a non-existent file. Reported by a user.
1019 ebl finish RecyclePool feature
1020 Media will takes Pool.RecyclePool
1021 when moving from Scratch to a Pool or when user will do
1022 update volume=xxx frompool
1023 To use it, add RecyclePool = aPool to your Pool resource
1026 RecyclePool = Scratch
1030 kes Expand new BSOCK class adding signal() and new BNET signals.
1031 kes Begin enhancing the dot commands adding a new API function
1032 that returns more information and will make it easier
1033 to interface to the Director from a program.
1035 kes Make DEVICE fd private. Its new name is m_fd, and can be
1036 obtained with dev->fd() outside the class. This is the
1037 first of many DEVICE members to be made private.
1038 kes Implement Michael Renner's idea on having a virtual disk
1039 changer. I made some minor modifications (e.g. I did not
1040 implement the Virtual Changer directive, but simply set
1041 the Changer Command to an empty string.
1043 kes Implement a BSOCK send() method that writes the whole record
1044 in a single write() request rather than in two.
1045 ebl add update volume=xxx recyclepool=yyyy
1046 volume takes recyclepool from pool when using update volume=xxx from pool
1048 kes Fix encryption deblocking bug, which caused some restored files
1049 to be truncated. This fixes bug #763.
1050 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1051 kes Fix 12am/pm bug as reported in bug #782.
1053 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1054 ebl Use btime_t instead of uint64_t in media patch.
1056 kes Optimize the use of the database a bit in the Status dir command.
1057 Only open it when needed, ensure that if any previous database
1058 was opened, it is closed.
1060 kes Correct VolCatBytes bug from media patch.
1061 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1062 in the case of orphaned records.
1063 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1064 and File records in 300K chunks to be more efficient. This
1065 idea came from Juan Luis Frances (if I remember right).
1066 kes Apply Eric's scratch patch that moves a purged Volume to
1067 the RecyclePool. Question: how is RecyclePool set? what
1068 happens to the ScratchPool?
1069 kes Apply Eric's media patch that collects read/write media
1070 times as well as byte counts. This patch requires a
1071 simultaneous upgrade of the DIR and SD. Note, there
1072 should be some way to turn off timing. I'm not sure
1073 times are in Bacula units.
1074 kes Apply Eric's batch-insert patch.
1076 kes Update projects list.
1078 kes Implement Include/Exclude file lists in FD as dlists using
1079 the new dlistString class. This permits efficiently having
1080 large include/exclude lists and completes project Item 25.
1081 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1082 console is authorized to cancel the job. This fixes bug
1084 kes Modify SD so that the VolCatJobs medium record is updated
1085 at the beginning of a Job rather than the end. This
1086 fixes bug #775 where exceeding MaxVolJobs caused jobs
1088 kes Added a mutex around getting and setting Volume information
1089 so that multiple simultaneous jobs will single thread.
1091 Switch to using Subversion
1092 kes Remove src/pygtk-console/ from configure
1094 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1095 plus the entrypoints.
1096 kes Apply patch supplied that corrects debug print
1097 in canceling jobs for max run time. Supplied as
1098 part of bug #621, which was previously fixed.
1100 kes Test on job_canceled() and sd_msg_thread_done inside
1101 loop starting the message thread to avoid a race condition.
1103 kes Remove rl_catch_signal from console.c as it conflicted
1104 with the header definition. Fixes bug #765.
1105 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1107 kes Clarify some stored/acquire messages to indicate if the
1108 problem is with read or append.
1110 kes Fix memory leak with storage ids in cats/sql_get.c
1111 kes Terminate watchdog earlier to avoid reference to released
1112 memory -- reported by Jason Austin.
1113 kes Move closing the database from jobq.c to the director daemon
1114 termination routine. This fixes memory leaks for shadow jobs
1115 (i.e. migration jobs).
1116 kes Free up the unique jobid chain items in migrate.c. This fixes
1117 a memory leak problem.
1118 kes Convert some ugly looking for statements to use foreach_alist
1119 in findlib/find.c. This will facilitate converting the structures
1120 to use dlist (for large include/exclude lists).
1121 kes Fix a bug in the btree.c and btree.h routines, then rename them
1122 rblist and add them to be built in src/lib. Include some new
1123 methods written by Rudolf Cejka that make the code more readable
1124 (hides some of the ugly casting).
1125 kes Add set_next() and set_prev() methods which make the code much more
1126 readable. Also add a new dlistString class that facilitates storing
1127 strings in dlists. To be used in the large include/exclude lists.
1128 kes Make some trivial modifications to lib/tree.h that use rblist
1129 rather than dlist for storing the tree links. This was suggested
1130 by Rudolf Cejka. The result of this is that the restore tree now
1131 uses red-black binary trees rather than simple linked lists. This
1132 should give rather dramatic speed improvements for directories
1133 contining large numbers of directories/files (more than 10000).
1135 kes Fix maxruntime bug #621.
1137 ebl Implement the include JobID in spool file name project.
1138 kes Reorder projects file in order determined by Jan 2007 vote.
1139 kes Implement item #12 on project list -- quick release of FD by
1141 kes Fix open of SQLite3 db where user does not have write permission
1142 so that DIR does not crash. Fixes bug #761.
1144 kes Add back missing @ in Win32 Makefile.
1145 kes Change 'Device not configured to autolabel' from INFO
1147 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1148 which should restart an indefinite # of times.
1149 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1150 other DIR specifications.
1152 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1153 Fix path quoting in SQLite scripts.
1154 Fix problems with SHGetFolderPath.
1156 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1158 kes Fix Job restart on error bug that promotes an Inc to a Full
1159 backup. This should fix bug #755.
1160 kes Add qt-console and first cut of code.
1164 kes Fix Bacula->Documentation link on Win32 to point to index.html
1165 instead of bacula.html. Fixed bug #750.
1166 kes Return JobId in db_get_job_record() when JobId==0. This should
1168 kes Do not release source pointers when restarting a failed job.
1170 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1171 This *should* fix bug #747.
1172 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1175 kes Modify USTORE constructor to set an empty store_source string,
1176 and don't copy the store_source string in a cancel. Hopefully
1177 this will fix Arno's seg fault, bug #744.
1178 kes Add back code to disable conio in configure. Fixes bug #743.
1179 kes Correct the Options scanner in the FD to correctly handle
1180 SHA1 option, which was eating the next option. Reported by
1182 kes Add code to indicate when the SD is spooling, spool wait, and
1183 despooling as requested by Alan Brown.
1185 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob