1 Technical notes on version 2.4.x
6 kes Update version to reflect the magnitude of the SD changes.
8 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
11 kes Add create_postgresql_database.sql to Win32 installer. Should
12 fix problem reported by Juilio Monteiro.
13 kes Get correct slot when auto unloading a device. This fixes bug
16 kes Fix multiple media restore.
17 kes Make DEVICE Slot private and access it via a method.
18 Allows better control over when it is set and cleared.
19 kes Fix possible seg fault if SQL error.
21 kes Add debug code to SD.
22 kes Fix renaming a Volume, which used the wrong Volume name.
24 kes If operator has rewind tape, print warning, release tape and
25 try once more. If tape is positioned somewhere, something went
26 wrong, so mark the tape in error and try once more. Previously
27 this error was fatal, now it produces an error message.
28 kes Ensure correct volume name displayed during restore
29 kes Ensure that Volume is mounted for restore.
31 kes Fix a few more Coverity reported problems.
33 Beta Release Version 2.2.10-b4
35 kes Enhance a couple of SD debug messages.
36 kes Tweak unload flag setting and ensure it is set during swap.
38 ebl Fix #1091 about bad output in estimate command.
40 kes Modify autochanger locking to attempt to avoid race
42 kes Make sure device not busy before doing label command.
43 kes Display open() errors except when polling. Previously too
44 many were suppressed. This should fix bug #1070.
45 kes Fix Win32 reparse points. Bacula will not recurse into any
46 reparse point directory, including mount points, unless the
47 directory is explicitly mentioned at the top level (same as
48 with Unix). A file that is linked to another file will be
49 backed up -- much as Unix does for hardlinked files.
52 kes Remove double quotes from ChangeLog and ReleaseNotes
53 kes Remove StorageId test when pruning and recycling (Eric's changes).
54 kes Remove old form of locking when getting volumes -- causes deadlock.
56 kes Fix buffer overruns detected by Coverity.
58 Beta Release Version 2.2.10-b3
60 kes Implement --without-qwt
61 kes Fix layout of restore tree dialog
62 kes Add configure bat QWT libraries, so that bat can be built
63 with or without the QWT libaries.
65 kes Apply batfix bat cleanup patch from Riccardo.
66 kes Make sure we unload the right slot when swapping.
68 kes Improve SD reserve debug code.
69 kes Testing an improvement to free up volumes no longer in use.
71 Beta Release Version 2.2.10-b2
73 kes Rework SD acquire for read to handle autochanger Volume
75 kes Implement regression that explicitly tests swapping a Volume
76 from one drive to another.
77 kes Enhance disk-changer to detect most error conditions.
78 kes Fix SD code so that it properly swaps a Volume between drives.
81 kes Prevent a Volume that is being swapped from being freed from
82 the volume list. This will most likely fix, at least partially,
84 kes Fix strippath so that it does not get a buffer overrun and crash FD.
86 kes Make inability to change owner/group when creating a dir only a
87 warning rather than an error.
89 ebl Fix SQL query in migration code
91 kes Force unload of volume when wrong volume mounted in SD.
93 kes Fix bat seg fault at termination.
94 kes Add Bacula generated version to bat about box.
97 Beta Release Version 2.2.10-b1
99 kes Permit multiple simultaneous restores -- experiment.
101 kes Backport development stream SD reservation system changes.
105 kes Move final volume swapping code to DCR method and
106 call it from acquire_for_read().
107 kes When wrong volume is mounted during read, unload_autochanger.
109 kes Stop searching for Volumes in SD askdir if DIR returns the
110 same volume name twice in a row.
112 kes Tweak the swap Volume from one drive to another code so that
113 it now seems to work.
114 kes Resolve several problems with recycling that broke the new
115 code (these problems are in 2.2.9 as well).
116 kes Remove the volume lock when calling the sysop code.
117 kes Don't mark a reserved volume with no writers as unused otherwise
120 kes Rework class structures for VOLRES, DCR, and DEVICE to make
121 the method names a bit more logical, and for more logically
122 handling the responsibilities.
124 kes Remove redundant code in terminating the scheduler that just
125 causes a seg fault in many cases.
126 kes Cleanup releasing a volume and make it a DCR method.
127 kes Improve algorithm for detecting pre-reserved volume and
130 kes Tweak volume swapping code so it works.
131 kes Correct name overloading in mount.c
132 kes Replace released flag in VOLRES with reserved and add access
133 methods for the VOLRES class.
134 kes Prevent volume from being released while being swapped.
135 kes Refactor parts of stored/mount.c
137 ebl Add sanity checks for VolWriteTime and VolReadTime
138 ebl Take care of bad clock changes while computing VolWriteTime
139 and VolReadTime. This should fix or limit #1066
140 kes Correct error string numbers in dird/catreq.c
141 kes Restructure reserving, acquiring, and mounting volumes. Calls to
142 autochanger are deferred for mount.c -- simplifes the code.
144 kes Do not prune any running job. It just fails the job.
145 kes Lock the volumes when changing dev->reserved_device and marking
146 the volume unused otherwise the device can get reserved by
147 another job before the volume is released, thus blocking it.
150 Beta Release Version 2.2.9-b7
152 kes Close bat console windows first to eliminate error message
154 kes Remove useless code in Scheduler that causes seg fault on
156 kes Correct some SD catalog request error messages.
157 kes Don't allow pruning of any running job.
158 kes Turn off code in read_record that causes a seg fault in the SD
159 when reading past an EOS_LABEL.
160 kes Turn off unloading the autochanger in reserve.c as it just
162 kes Lock volumes when unreserving a device.
163 kes Do not mark volume unused when recycling.
164 kes When acquiring, don't mark volume unused if it is reserved (busy).
166 Beta Release Version 2.2.9-b6
168 kes Eliminate ./configure warning on po directory
169 kes Fix bug #1063, reuse of freed ptr in list nextvol.
170 kes Release regex compile buffer in filed/job.c
171 kes Add proper type of const char in sql_create.c
172 kes Turn off debug in daemon termination routines
173 kes Move free_volume_list() before devices are freed in stored.c
174 kes Fix reference to uninitalized stack variables in bregex.c.
175 This should correct bug #1067.
177 kes Fix possible seg fault in SD when freeing a volume entry.
179 kes Apply patch from bug #1069 that corrects spurious error messages
180 when ACLs enabled on SGI but no ACL exists.
181 ebl Fix a storage deamon segfault at debug level 500.
183 Beta Release Version 2.2.9-b5 -- not released
185 Beta Release Version 2.2.9-b4
187 kes Re-enable code to remember last volume mounted on a non-tape
189 kes Add patch supplied in bug #1068 that fixes a SD crash when using
190 a Virtual autochanger.
191 kes Generate correct JobMedia records during spooling/despooling when
192 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
193 <tih@hamartun.priv.no> for excellent analysis and testing.
195 Beta releae version 2.2.9-b3
197 kes Rework certain SD locking based on gdb tracebacks of deadlocks
198 sent by Eric. This code now uses only the volume_lock() rather
199 than the reservations lock when at EOM and acquiring a new
201 kes Ensure only one exit point in several subroutines.
203 Beta release version 2.2.9-b2
205 kes Fix to initial tape drive open to release the volume name
207 Beta Release Version 2.2.9-b1
209 kes Fix to JobMedia fix.
210 kes Fix bug pointed out by Peter Much that causes the StorageId to
211 be updated when reading a tape (during migration, it could have
212 been incorrectly set to the write StorageId).
214 kes Implement autostart scripts for Debian
216 kes Fix mtx-changer.in for broken Debian mt program.
218 kes Massive commit of all fixes and back ports to create 2.2.9
220 kes Apply doc fix from bug #1062.
221 kes Resolve crash and improper restore wx-console Win32 restore
222 GUI. Fixes bug #1065.
223 kes Update Win32 wxWidgets to latest version.
224 kes Attempt to do correct handling of Win32 mount points. Should
226 kes Fix Win32 FD backup/restore memory leak due to improper termination
227 of BackupRead/Write. This fixes bug# 1038.
228 kes Add const to AIX prototype for initgroups()
230 kes Undo bug #1047 heap overrun fix as it is not correct.
232 kes Fix creating first JobMedia record during Migration to include
233 proper index. This caused slow restores of migrated jobs.
235 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
236 and do not strip paths on symbolic links.
237 kes Set catalog backup database and user name from values specified on
238 the ./configure line.
239 ebl Apply patch to correct bug #1031, about wrong pool source information
242 Release Version 2.2.8
244 kes Apply patch from Martin to correct bug #1040, bscan sets existing
246 kes Fixed important spelling error in doc -- bug #1045.
248 kes Move initialization of read/write res lock earlier in the code.
249 This fixes the crash with a null conf file. This fixes bug
251 kes Redefine CURES in lib/parse_conf to be URES and move it all
252 into lib/parse_conf.c -- this responds to bug #1042, but does
253 not fix it. The fix is not to compile with FORTIFY_SOURCE.
254 kes Backport fix de-referencing a NULL pointer in the scanner from
255 the trunk SVN. I don't think this was reported as a bug.
257 Beta release Version 2.2.8
259 kes Re-enable the new job code editing (%f).
261 kes Fix bsnprintf for float point numbers. I broke recently when
262 parameterizing some variables.
264 kes Move Heartbeat documentation from Job to Director resource.
265 This fixes bug #1033.
267 kes Fix existing switch drive SD code to call autochanger to release
268 any old volume. This must be done to keep the autochanger from
269 releasing subsequently newly reserved volumes in doing a close().
270 This should possibly fix bugs #1032 and #1018.
271 kes Apply big backport of current SVN SD code that corrects a number
272 of race conditions. This is a first step in fixing bug #1018.
274 ebl Fixes bug #1028 where 'Selection Type' option was not usable
278 Release Version 2.2.7
280 kes Partial back out (disabled) %f job code editing because it
281 does not build on Win32.
282 kes Fix seg fault Frank Sweetser reports in regression testing
283 on his systems. The problem was that the original author of
284 bsnprintf.c did not take into account the side effects of
285 using ++x in the argument to a #define.
287 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
288 that implements double quoting include names in conf files,
289 and also allows piping input by having the first character
290 be a vertical bar (|).
291 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
292 that implement %f in RunScripts to pass the FileSet name.
293 kes Skip leading | when lex input comes from a pipe as suggested
294 by Michael Stapelberg <michael@stapelberg.de>.
296 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
297 Nerijus Baliunas <nerijus@users.sourceforge.net>
299 kes This patch corrects a problem where the maximum concurrent storage
300 jobs counter gets out of sync during restore jobs causing jobs to
301 'wait on max Storage jobs'. This patch fixes bug #1009.
303 kes Add new include to postgresql.c suggested by Marc Cousins so
304 that it compiles correctly with pgre version 8.3. Also fix
305 misuse of %x with pointer (should be %p).
307 kes This patch fixes bcopy so that it produces correct Volumes.
309 kes This patch eliminates spurious output to the console during a VerifyVolume
310 job that contains encrypted data. It fixes bug #1024.
312 kes This patch prevents the 'status dir' command from trying to use a scratch
313 volume and possibly moving it from one pool to another. This patch fixes
316 kes Fix --archivedir addition to configure. Replace it with
317 --with-archivedir in configure.in This fixes the regression
319 kes This patch fixes bug #1012 where the job is canceled because
320 of Max Run Time exceeded when the job has not yet started.
322 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
323 one 'part' to write. Instead of each part being stored on disk,
324 written to DVD, then deleted from disk, all parts are written to disk,
325 and only the last is written and deleted from disk.
327 kes Correct typos in disk-changer.in
329 kes This patch fixes the status command to include the formating string for
330 JS_AttrInserting. It fixes bug #1021.
331 kes This patch should fix the Mac OS X build problem on the latest
332 Darwin, where sys/types.h was not included correctly (apparently
333 due to a change in the Mac headers). The solution was to explicitly
334 ensure that it is defined for the ./configure.
335 This patch also has a rebuild of configure that includes the Debian
336 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
337 kes This patch should ensure that queued messages to the console are
338 displayed as soon as possible. It should fix bug #1007, but has been
339 reported not to work.
341 kes This patch fixes the infinite loop when trying to increase the
342 maximum number of volumes in a Pool during the add command.
343 This patch fixes bug #1008.
345 Release Version 2.2.6
347 kes Get fix for joblist bug in bat from trunk.
349 kes This patch fixes bug #1003 where putting the message output from
350 a Verify job into the catalog results in a recursive loop. The problem
351 seems to show up only with postgresql (to be verified).
353 kes Fix bug #942 where lots of emails where generated when the heartbeat
354 interval was low and Bacula wanted a different tape from the one in
357 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
358 which was updated during a restore (or a reading migration) bug #982
360 ebl Use qmake-qt4 instead of qmake when available (debian system).
362 kes Add a security warning to src/cats/make_catalog_backup.in indicating
363 that passing the password via the command line (arg 3) is insecure.
364 This responds to bug #990 (it doesn't fix it).
365 kes Apply 2.2.5-postgresql-errors.patch
366 kes Remove unneeded File table index on JobId, which is already
367 present as the first index of another multi-index.
369 kes Set default debug_level to zero. This corrects bugs #991 and #993.
370 kes Fix a crash in bat when it cannot connect to the Director for example
371 if the Director is not running.
373 kes Activate Close button on tray-monitor window. This fixes
376 kes Fix spurious warning message printed when creating a volume with
377 a LabelFormat. This fixes bug #976.
379 Release Version 2.2.5
381 kes Add JobId in place of Job name in all the Jmsg() output.
382 kes Correct the APP_DESC for the Win32 storage service (remove an e).
384 kes Add new SD despooling attributes and Dir inserting attributes
385 job status codes. This fixes bug #961.
386 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
388 kes Fix doc issue. This fixes bug #963.
389 kes Fix listing performance problems in bat. Pointed out by
391 ebl Fix replace on restore. This fixes bug #969
392 kes Fix bat code that tests for Win32. This should fix bug #968
393 kes Query 5 list wrong Vol after migration. This fixes bug #960
395 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
396 in back porting from 2.3.x
398 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
399 The details are included in the notes in this file.
401 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
402 messages; it fixes a problem opening the SQLite3 database when multiple
403 simultaneous jobs were running; it fixes a bug with certain versions of
404 MySQL where batch inserts failed because of table name character case
405 (upper/lower) differences.
406 kes Fix race condition that drops final block written to volume.
407 This happens in rare cases with multiple simultaneous jobs
408 when the Volume fills. This fixes bug #964. May be related
409 to bug #935 and possibly #903.
411 kes Fix FD->SD authorization failure, which was due to spurious
412 wakeups from a pthread_cond_timedwait(). Simply check the
413 predicate before continuing. This fixes bug #953
414 dvl Add new configuration item --archivedir
415 dvl Adjust regression tests to use tmp not /tmp. This will allow
416 multiple concurrent runs of the regression tests.
418 kes Fix race condition that drops final block written to volume.
419 This happens in rare cases with multiple simultaneous jobs
420 when the Volume fills. This fixes bug #964. May be related
421 to bug #935 and possibly #903.
422 kes Eliminate more strerror() and replace with bstrerror().
423 kes Remove BSD getopt and replace with unrestricted IBM version.
424 kes Fix Win32 build for changed calling sequences.
426 kes Fix FD->SD authorization failure, which was due to spurious
427 wakeups from a pthread_cond_timedwait(). Simply check the
428 predicate before continuing. This fixes bug #953.
429 kes Add const char where needed (more to do).
431 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
432 kes Don't overwrite error message in check_tables_version.
434 kes Unlock batch insert tables with same calls used elsewhere.
435 kes Allow starting 59 jobs a second.
436 kes Make SD session key more random.
437 kes Add retry for SQLite opening db if it fails. Probably helps
439 kes Suppress extra error messages during batch insert failure.
441 kes Put some FD auth code on dbglvl rather than fixed.
442 kes Return insert attributes error message in db msg buffer to avoid
443 false error messages. Helps fix bug #966.
444 kes Separate batch init error messages. Probably helps fix bug #966.
445 kes If Dir gets an error during inserting attributes, cancel SD.
446 This reduces unnecessary error messages.
448 ebl Cleanup batch insert code. Probably fixes bug #965.
450 kes Turn off some code when batch insert not enabled.
451 kes Edit FD name in connect error messages.
453 kes Add code to handle tray monitor separated from Win32 FD.
454 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
456 kes Fix ANSI tape labeling. This fixes bug #954.
457 kes Increase the max block size to 4MB fixes bug #957.
458 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
459 is not properly mounted (recognized) during a poll.
460 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
461 Job that has differences reports Verify OK.
463 Release Version 2.2.4
465 kes Increase size of name string when FD making connection to SD.
468 kes Add code to try to fix bug #908.
469 kes Add waits to multiple exit detection code to try to force pid
470 file to always be deleted.
471 kes Restore good dev.tar.gz to rescue set appropriate binary property.
473 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
474 trying to switch drives by checking for blocking before unblocking.
476 kes Cancel storage daemon in all cases where FD reports error. This
477 should fix virtually all cases of bug #920.
479 kes Fix error message that was clobbered when Dir tells SD it does not
480 have write permission on Volume. This should fix a minor point
481 in bug #942, but not the main problem.
482 kes Add code to cancel job in SD if FD connection fails. This should
484 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
485 kes Fix migration code to get correct Volume name with multiple volumes
486 by skipping |. Fixes bug #936.
487 kes Implement patch supplied by Landon to fix bug #944 where using
488 TLS with bconsole uses 99+% of the CPU.
489 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
491 kes Move patches into patches directory.
493 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
496 ebl Using 'm' in bconsole will show messages like before,
497 and not memory usage.
499 Release Version 2.2.3
500 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
503 kes Fix bug #935, and probably also bug #903 where files were not
504 restored. MediaId was not properly set in JobMedia record after
507 kes Add ./configure search in qwt-qt4 for qwt package
508 kes Apply Martin Simmons patch that should turn off the new API usage
509 when batch insert is turned off allowing building on older
512 Release Version 2.2.2
514 ebl Detect if new PosgreSQL batch insert API is present.
515 kes Correct incorrect mempool call causing Director crash.
516 sb Update spec files for 2.2.1 release
518 Release Version 2.2.1
520 kes Update POTFILES.in
521 kes Cleanup a few underquoted AC_DEFUNs in configure
522 kes Apply patch from Martin Simmons that adds a test for va_copy to
525 kes Fix bug 921 by increasing the number of tries to create a new volume
527 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
528 can be called multiple times. Implement a version for machines
529 without va_copy() that gets a big buffer.
531 kes Integrate more portable zone offset code into bsmtp.c
532 Submitted by Attila Fülöp.
534 kes Fix bad SD->FD return status reported by
535 (James Harper) <james.harper@bendigoit.com.au>
536 ebl Fix a bug in read_close_session which return random status
537 thanks to James Harper
539 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
540 and directory names during restore of single file/directories.
541 kes Add sanity checks to .sql command when string is empty. Hopefully
542 that will resolve Dirks Director crash.
544 kes Apply patch submitted by Martin Simmons that corrects a seg fault
545 in the bsmtp chat subroutine when debug is >= 10.
547 kes Fix Director crash when running bat SQL queries.
548 kes Add David's notes on Item 8: Copy pools.
550 kes Rework projects file to be current and ready for a vote.
551 kes Enhance lex scanner error message.
553 kes Tweak LICENSE file to mention BSD code.
554 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
555 if specified on the ./configure.
556 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
557 This class is intended to allow us to open a second bsock to the
558 Director while in the restore subdialog.
560 kes Fix configure to create bat Makefile before creating dependencies.
561 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
562 kes Add a tooltip to the tray monitor.
563 dvl Set the Director's PID file before dropping privs. This fixes
566 kes Update AUTHORs file
567 kes Increase the default max concurrent jobs to 20 in FD and SD to
568 correspond with the default .conf files.
569 kes Rewrite the Win32 service routines. This eliminates the 3 copies
570 some different, of the same file created by RN when porting the
572 kes Rearrange some of the Win32 directories and the placement of the files
574 kes Set DEVELOPER flag in version.h
576 ========================================================================
577 Release Version 2.2.0
579 kes Apply a second doc patch from Marc.
580 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
581 improves the tips section that discusses how to setup multiple
584 kes Update bat README file.
585 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
586 corrects a typo in the Recycle status check in db_find_next_volume().
587 This will probably fix a number of annoying problems with multiple
589 kes Modify most of dird/msgchan.c to use bsock class calls rather than
590 bnet calls -- no functionality change.
592 kes Modify the Verify output to specify if files are missing on
593 the Volume(s) or disk. Fixes confusion in bug #916.
594 kes When more than one Volume is read in a migration job, the last
595 Volume bytes reported are from the last read volume rather than
596 the last written volume. Fixed. This fixes bug #910.
597 kes Fix display of Recycle flag after update volume=foo recycle=yes.
598 It previously printed New Recyle flag is: no. This fixes bug
601 kes Correct seg fault when switching tape drives during restore.
602 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
603 be used until after 2.2.0 release.
605 kes Remove fnmatch() in SD that permitted wild card specifications.
608 kes Fix %g in filename returned by SQL for browse tree reported by
610 kes Fix configure so that it puts config.out in the cwd rather than
612 kes Attempt to fix the locking problem reported by Eric in bug #906.
613 kes Make berrno class to leave errno unchanged after constructor call.
614 kes Make bnet_server use the heap rather than the stack to allocate
615 its socket fd pointers to avoid a crash at termination. Problem
616 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
618 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
619 and putting it in depkgs-qt along with Qt4.3.
621 kes Rework code in acquire.c that switches drives for reading when
622 the Media Type does not match. This should fix bug #906
624 ebl Fix a director segfault during job setup #907
625 kes Correct seg fault in postgresql when first operation returns no
626 rows. Fixes Dirks File browser problem seg fault with bat.
628 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
629 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
632 kes Implement PopUp YES/NO dialog for bat.
634 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
636 kes Correct RunScript to terminate job in FD on failure.
637 kes Change abort_on_error and AbortJobOnError to fail_on_error
638 and FailJobOnError in RunScripts.
639 kes Minor tweaks of code formating in RunScripts, principally to
640 avoid depassing 80 columns.
642 kes Eliminate one #ifdef Win32 in bsmtp
643 kes Implement grow tool to grow a file for testing very large databases.
644 kes Add big-vol-test to test Bacula seeking with > 5GB.
647 kes Modify find_next_volume() to return all values in Media record.
648 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
652 kes Update Release notes
654 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
655 Warning, in previous beta version, all media get from scratch keep their
658 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
659 This should fix bug #842. Made a note to look at removing the temp
660 files at the end of the install.
661 kes Add ability to mount and unmount a file device providing it is
662 marked as being removable and has the appropriate mount and unmount
663 commands defined in the Device resource. This fixes bug #830.
664 kes When applying a storage override, release all previous storage
665 definitions rather than just prepending the new storage.
666 This should prevent a good deal of confusion.
668 kes Implement ./configure search for qwt libraries.
670 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
671 Win32 FD. This should fix bug #893.
672 kes Remove an unnecessary beep in Win32 init code.
673 kes Update copyright dates in Win32 executable about boxes.
674 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
675 code with a BSD getopt.c and getopt.h.
676 kes Remove sched.h from the Win32 compat directory -- not used.
677 kes Remove the Exit menu item from the Win32 tray monitor. If you really
678 need to shut it down, do it through the services panel or the command
680 kes Remove some inappropriate Bacula FSFE copyrights.
681 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
682 kes Fix regress config non-portable test as pointed out by
683 Florian Heigl <florian.heigl@gmail.com>
684 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
685 as pointed out by Florian Heigl <florian.heigl@gmail.com>
687 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
688 Reported by Frank Sweetser.
692 kes Fix client-only build.
693 kes Integrate client-only fixes for bsys (initgroups) and conio from
694 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
695 kes Make arguments to get_scratch_volume() in same order as other
697 kes Rework the prune_volumes() subroutine so that after purging and
698 no volume found in desired pool, it will check for a scratch
699 volume. This prevents recycling the whole scratch pool.
700 kes Add code to status storage to print boffset_t (largefile support).
702 kes Move qwt (Graphics libarary for Qt4) to depkgs.
703 kes You now need a --with-qwt=<dir> to be able to build bat.
704 kes Update src/win32/cats/bacula_cats.def to include the new
705 db_get_query_dbids() call on Win32.
707 kes Correct a problem when selecting a scratch volume and moving
708 it to another pool that lost some columns.
709 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
710 kes Enhance Autochanger error messages to include Volume and device name.
711 kes Rework prune_volumes() code to take account of InChanger flag,
712 and to handle recycling volumes going to the Scratch pool and
713 current pool because the RecyclePool directive.
714 kes Implement a better and more efficient db_get_query_dbids() to
715 handle creating and passing back a list of DBIds.
719 kes Start work on new more efficient DBId subroutine. First use
720 will be for recycling volume to Scratch inchanger.
721 kes Increase number of JobIds in pruning from 1000 to 10000.
722 This to be replaced by above routine.
723 kes Begin implementation of building Qt4 on Win32.
724 kes Correct typo in fix I added for bad TLS shutdown.
725 kes Pull 2.0.3 patches into patches directory.
726 kes Update Release notes. Include qt-console in line count.
727 kes Update Projects file.
729 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
730 bug in migration code where a job that spanned two volumes
733 kes Implement new BST_DESPOOLING blocked state. Change from locking
734 during despooling in SD to blocking. This means that other threads
735 can work with the device structure, in particular the reservations
736 system while despooling.
738 kes Fix return in reservation message queue that missed clearing
739 the jcr lock (implemented 26Jun07 below).
740 kes Rename a number of dev methods to make locking function names
742 kes Document locking in lock.c. Move lock structures to new file
745 kes Move reservations message lock to lock jcr only this
747 kes Move main SD locking code into lock.c (new file).
748 kes Update Win32 build to include lock.c
752 kes Dirk committed the qwt library code for drawing graphs in bat.
753 kes Tweak install of qwt so that it is integrated with ./configure.
755 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
756 out by Eric (my typo).
757 ebl Fix configure.in to get batch mode enable
758 kes Return correct string from authenticate.cpp in bat when connecting
760 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
761 spurious line drops when using TLS.
762 kes Do not file reparse points when restoring a file that already
765 kes Implement Windows reparse points -- similar to directories, but
766 we do not descend into it. This is a first cut. They seem to
767 be backed up, but restore is not yet tested.
768 kes Remove restore_blocking in tls code when shutting a socket to leave
769 it in blocking mode. Hopefully this will fix the encryption bug
770 reported by Frank Sweetser.
771 kes When opening a file for backup, tell the OS that we are going to
772 read it sequentially -- optimization.
773 kes Change variable names in authenticate_director() to not conflict
774 with member names in bat. Caused great confusion with compiler,
777 kes Queue openssl error messages in case of comm problem.
778 kes Do shutdown() call if socket terminated.
779 kes Remove some duplicated code in tls.c
780 kes Move more of the bsock member variables into private and access
782 kes Add Frank Sweetser's tls-test to the regression suite.
784 kes Add Swedish sv.po file
786 kes Don't print clock skew message in FD if less than 3 seconds diff.
787 kes Add a bit of VSS info to status client.
788 kes Implement a first cut of Vista VSS, using Win2003 code.
793 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
794 loaded tape but uses first drive).
795 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
796 This was indeed a Win32 issue.
798 kes Simplify search of autochanger for in-use Volume.
799 kes Fix exit condition of check for in-use volume. kes Remove
800 inappropriate my_postgresql_free_result() in db_close()
802 kes Fix bad return in FD when encryption signature not found.
803 Probably caused a crash.
804 kes Inhibit missing encryption signature error messages for
805 file types where no signature computed.
806 kes Correct inverted check on autochanger in reservation system.
807 kes Tweak debug code in autochanger reservation.
809 kes Add some additional locking in the cats directory in subroutines
810 that modify packet variables called from batch insert.
811 kes Rework how dcrs are allocated. new_dcr() can now be called
812 with an existing pointer, and it will simply clean it up.
813 This allows the reservation system to test various different
814 devices, and will permit easy device changes.
815 kes A bunch of changes all over to handle new new_dcr() calling
817 kes Work more on the Volume management in the SD. Remember Volumes
818 for tape drives and for autochangers (even virtual disk changers).
819 kes When looking at the Volume list to reserve a drive, handle
820 autochanger names correctly by interating through the changer
821 devices. Also call the Director to see if a Volume is suitable
823 kes Fix some bugs in bscan. Make sure all media records are written.
824 Make sure that valid JobMedia records are written for disk files.
825 Previously they were completely wrong.
826 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
827 that the URLs don't change and so that the developers will all
828 work off the same copy. Rebuild from scrach.
829 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
833 kes Fix seg fault in FD from incorrect digest size.
834 kes Fix argument to non-OpenSSL crypto.c subroutine.
838 kes Remove a few malloc()s from the encryption code.
839 kes Use the class calls to bsock in filed/backup.c and restore.c in
840 place of the old bnet_xxx code.
841 kes Implement code that does an on the fly calculation of the
842 signing digest during restore of encrypted files. It makes
843 a best guess at the algorithm, and if it is not correct, will
844 then revert to the old code which reads the file after it is
846 kes Implement at least one missing crypto stream in stream_to_ascii()
847 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
848 #877 where a reload with bad syntax causes Dir to exit.
850 Cut: 2.1.14 beta (not released)
852 kes Do not free a volume on a tape drive until another volume is
853 mounted and read, or the autochanger unloads the volume.
854 This should help the SD re-use volumes that are already mounted,
855 and should fix bug #886.
856 kes Apply patch from user brettedgar that allows gnome2-console include
857 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
858 kes Apply patch from Lucien Weller that fixes day of week calculation
859 because of DST flag problem. Fixes bug #887.
861 kes Move find_next_appendable_volume() to after acquiring a valid device
862 in reserve.c. This fixes bug #864 -- confirmed by reporter.
864 kes Unable to reproduce bug 872. However added additional testing for
866 kes Bug #874 resolved by documenting SQLite limitations.
867 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
868 kes Bug #881 resolved by removing typo in mtx-changer script.
869 kes Made Frank Sweetser's wiki the official Bacula wiki with his
870 approval. Added a link to the wiki on the web page, and implemented
871 a backup from http://paramount.ind.wpi.edu
873 kes Fix update allfrompool to pass pool name.
875 kes Convert to pure GPL v2 license.
876 kes Fix sscanf problems reported by Peter Buschman that caused
877 a bus error on Solaris.
878 kes Rework (simplify) the select prompt in bat.
879 kes Move get_jobid_from_tid() into lib and create a
881 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
882 should definitely fix the problem of lost error messages in the
884 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
885 kes Eliminate tcpd.h from the project. Enclose the #include from the
886 library with extern C ...
887 kes Add print of signal name when a signal is trapped.
891 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
893 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
894 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
895 makes SQLit3 run 30 times faster, though a bit less safe.
896 kes Implement --with-batch-insert in configure and detection of thread
897 safe libraries. It is on by default, but turned off if no thread
898 safe library (e.g. SQLite 2) is available.
900 kes Fix Bacula PostgreSQL buffer overruns.
901 kes Do better checking for NULL results returned from PostgreSQL;
902 implement retry for failed queries; clear results buffer after
903 failed query. Hopefully this will correct the PostgreSQL failures.
905 kes Implement algorithm to handle only one appendable volume with
906 Prefer Mounted Volumes = no.
907 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
908 returned from a query.
909 kes Make volume lock recursive.
910 kes Implement an additional volume reservation algorithm that
911 starts by considering all reserved volumes then uses the
912 old brute force algorithm of searching the resources to
913 find a suitable device.
914 kes Add new reservations debug code and refine the old code.
915 kes Update the win32/dll/bacula.defs file.
917 kes Tweak reservations algorithm to permit a few more cases, i.e.
918 volume reserved, but on different drive, ...
919 kes Enhance SD status to include Pool and Media Type for drive in a
920 more readable format (a bit longer).
921 kes Fix PostgreSQL double free.
923 kes Minor refactoring of restore decryption code.
924 kes Add code to smartall.c to detect double free of a buffer.
926 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
927 so that bsmtp will create a correct email address (mailbox only).
928 kes Modify 'memory' command so that the buffers are listed as 'In use'
929 to avoid confusion with Orphaned buffers.
930 kes I reworked the OpenSSL include/lib flags to be handled in
931 the standard Bacula way, which should fix bug #863 concerning
932 non-standard OpenSSL libraries.
934 kes Implement Help Browser window for bat.
935 kes Fix reload bug that reset StorageId to zero.
937 kes Fix TLS #ifdefing when TLS turned off.
938 kes Ensure that when labelling a tape with Slot=0 that InChanger
940 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
942 kes Add StartTime to final uar_sel_jobid_temp query so that we can
943 add DISTINCT (required by PostgreSQL).
944 kes Implement BSOCK authenticate_director() method. Eventually will
945 authenicate all daemons.
946 kes Move several more functions into the BSOCK class.
948 kes Add code to tell the OS that we no longer need a cached
949 file that we were reading. In findlib/bfile.c. Also,
950 only cache files that we are reading. Thanks to
951 Tobias Oetiker <tobi@oetiker.ch> for the idea.
952 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
953 kes Implement script to automatically generate cats and dll .def
955 kes Update README.mingw32 to include new .def file generation.
956 kes Correct typo in UTF-8 error message as reported by:
957 jhernandez <julianhernandez@gmail.com>
958 kes Add additional sm_check() code on debug level 1.
959 kes Set default debug level to 1.
960 kes Trap SIGABRT in attempt to get traceback.
962 kes Reduce bat connect timeout from 30 to 15 seconds.
963 kes More restructuring and implementing BSOCK class in place of
965 kes Remove a few unnecessary malloc() tests in crypto code.
966 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
967 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
968 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
970 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
972 kes Fix Verify InitCatalog. The attributes were not pointing to the
973 correct saved location.
974 kes Implement message callback so that GUI is sure to get all
975 daemon messages. Currently displayed in a dialog in bat.
976 kes Ignore SIGUSR2 (Bacula timer) in bat.
977 kes Apply regress patch from bug #859 to allow regress to work
978 with Solaris compiler.
980 kes Begin adding TLS support to bat.
981 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
982 clean up lex.c and make it more readable.
984 kes Move more bnet functions into the BSOCK class.
985 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
986 kes Complete change of berrno strerror() method to bstrerror()
990 kes Cleanup incorrect email addresses in bsmtp.
991 kes Make bat display initial messages rather than discard them.
993 kes First cut of adding .mod to the run command.
994 kes Implement auto display of messages in bat.
995 kes Enhanced preferences to allow all Bacula output to be
998 kes Fixed bug #856 autochanger documentation.
999 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1000 kes Add new cats entry point so Win32 builds.
1002 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1003 kes Do better checking for the MySQL 64 bit libraries looking for both
1004 .a and .so libraries.
1005 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1006 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1007 kes Require the thread safe version of MySQL during configure. Thanks
1008 to Andre Noll for pointing this out.
1009 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1010 continuing in migration code.
1011 kes Apply implementation of tray-monitor font derived from gnome-console
1012 submitted by Andreas Piesk <a.piesk@gmx.net>
1014 kes Eliminate important memory loss in SQLite
1015 kes Fixed the batch insert MySQL thread specific data that was not
1016 being freed. See cats/mysql.c:db_thread_cleanup().
1017 kes Fix restore before command.
1018 kes Convert old hdr.name to name() in a few places.
1019 kes Implement update jobid command.
1020 kes Return all time_t dates in db_get_job_record()
1021 kes Stop watchdog in SD earlier.
1022 kes Put Pool just after Storage in please mount message.
1023 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1026 kes Update the po files.
1027 kes Fix Verify InitCatalog by making it cache attributes.
1029 kes Change name bacula-bat to bat for man 1 page to correspond to
1031 kes Check for client and store NULL pointers in status command. This
1033 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1034 kes Fix sign extended editing of %p.
1035 kes Clean out a little old #ifdefing in cats/mysql.c
1037 kes If time diff between DIR and FD is more than 600 seconds convert
1038 INFO message to WARNING.
1039 kes Implement heap size display in status for all daemons.
1040 kes Attempt to fix MySQL db open memory loss (not successfull).
1041 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1042 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1043 Query. This looks like a MySQL but but by doing extra releases,
1044 the memory goes away. This should fix bug #847.
1046 kes When backup fails, cancel SD before waiting for sd termination.
1047 kes If SD is waiting for FD to connect during cancel, wake up the
1049 kes Fix fsf code so that errno is correctly reported.
1050 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1052 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1053 the original jobb's FileSetId.
1054 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1055 spooling in migration jobs. Not yet tested.
1056 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1057 reading conf file from a pipe. However, do it with open_bpipe()
1058 rather than popen. Not yet tested.
1060 kes Fix an ugly bug where the VolCatBytes were getting updated
1062 kes Implement bconsole memory command that prints current memory
1063 usage, plus smartalloc dump.
1064 kes Clarify some error messages in backup, admin, and migrate.
1065 kes Shrink label dialog to smaller size.
1066 kes Invert Cancel OK buttons on restore to be OK Cancel.
1067 kes More strerror() to bstrerror() conversions.
1069 kes Start implementing bstrerror() in place of strerror().
1070 kes First cut at stripping path -- seems to work.
1072 kes Prevent door and port files from being restored (mostly
1074 kes Free an unreleased buffer in compat code.
1075 kes Change console Job name from *Console* to -Console- to eliminate
1076 Win32 filename problems. Put Win32 path separator when creating
1077 Console file. This fixes bug #846.
1078 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1080 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1082 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1083 to force Win32 error message.
1085 kes First cut strip path. The data should be passed to the FD,
1086 but nothing is done with it yet.
1087 kes Enhance the digest and signature routines in the crypto
1088 library to accept a JCR and to use it to print error messages
1089 so that they will go in the Job report rather than the daemon's
1091 kes Simplify some of the verify signature code.
1092 kes Simplify a few of the alternative returns in the signature
1095 ebl Use only POSIX regex instead of GNU regex in breg.c for
1096 File relocation. It fix broken freebsd compilation.
1097 kes Convert all other Dir files to use ne ua class message
1099 kes Tentative fix for missing digest signature in bug 807.
1100 kes Correct handle problem in new win32_ftruncate routine.
1101 kes Convert ua_purge.c and ua_update.c to use new ua class
1102 message routines for bat.
1104 kes Correct incorrect installation of LICENSE in Win32 installer.
1105 kes Display LICENSE at the beginning of the Win32 install.
1106 kes Attempt to correct the need for the png files to be installed
1108 kes Reapply my bat.conf install script in qt-console. I think I
1109 editted bat.pro instead of bat.pro.in and it was lost.
1110 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1111 the /var/lock/subsys for subsysdir. Also corrects typos in the
1114 kes First cut update job.
1115 kes Correct configure to include qmake of src/qt-console directory.
1117 kes Make restore job yes/mod/no print in one command so GUI works.
1118 kes First cut implementing backup and restore client.
1119 kes Correct editing in Verify output that caused a seg fault.
1121 kes Insure that bat.conf is not overwritten during installation.
1122 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1123 while I was implementing migration in March 2006 !
1125 ebl Cleanup file relocation, using char *RegexWhere instead of
1126 char *where + bool where_use_regexp
1127 kes Update some manpages and add bat manpage.
1128 kes Make a first cut at converting bacula.spec.in for bwx-console
1130 kes Apply patch from John Goerzen to add hostname as fourth argument
1131 to make_catalog_backup script.
1132 kes Fix typos I introduced into bsmtp.c
1133 kes Make pm_strxxx() routines handle input of NULL pointer. This
1134 is to protect from NULL pointers returned from SQL databases.
1135 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1136 kes Add more debug to FIFO code -- fix fifo regression test.
1138 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1139 kes Add thread timer to bnet_connect() to break from OS if wait time
1142 kes Update Win32 build to include new files, new symbols, and
1144 kes Implement socket level heartbeat (tcp_keepidle)
1145 ebl Commit File relocation patch
1146 kes Make bat have 'make install' target.
1147 kes Warn during install if old gnome-console binary found.
1148 kes Warn during install if old wx-console binary found.
1149 kes Add -8 option to bsmtp command line to add content type utf-8.
1150 Fixes bug #809. (Character coding problem in bsmtp).
1151 kes If < is found in target (from, to, cc) then do not enclose the
1152 target in < > in bsmtp. Fixes bug #772 (malformed address).
1153 kes When printing certain items in dbcheck, stop after 300000.
1154 Fixes bug #822. (dbcheck loops).
1155 kes Incorrect status in Dir after waiting for mount with poll set.
1158 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1160 kes Print waiting to reserve a device every 5 mins.
1162 kes Don't call close_part in label.c if tape and relabel.
1163 kes Don't free volume if busy in close() -- should help with
1165 ebl Fix #824 RunScript bug (After script could be execute twice)
1166 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1167 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1168 Add a regression script to test RunScript
1170 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1173 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1174 deprecated. No additional bugs will be fixed, and they will be dropped
1175 in a future release (probably 2.4.0).
1176 kes Change name of wx-console to bwx-console to make it more Bacula
1178 kes Change the name of gnome-console to bgnome-console to make it
1181 kes Some time in March, a Feature Request with patch from Jorj Bauer
1182 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1184 The ability for the director to validate a Client (FD) CN against
1185 an arbitrary set of patterns rather than the hostname, with
1186 A new 'TLS Allowed CN' set of directives which are implemented
1187 in the Client resource. Then pattern matching is used in place
1188 of hostname matching against the Certificate's CN. As an example, we
1189 have certificates which (a) use a local CA, and (b) have a CN of the
1191 kes Add new/changed entry points to Win32 build
1192 kes Create unaccepted-projects for projects that are not accepted.
1193 kes Simplify locking in the reservations system.
1194 kes Add more debug code in reservations.
1195 kes Make sure error condition on reserving a volume is handled correctly.
1196 kes Correct handling of volume_in_use.
1197 kes Correct handling of initializing a device.
1198 kes Move handling of broadcasting releasing a device into release_device().
1199 kes Correct attaching dcr to dev so that it is only done if device
1200 is properly initiated.
1202 kes Locking debug level tweaks in SD.
1203 kes Tweak new Volume code.
1205 kes Add exec external-command [wait-seconds] to bconsole. This
1206 executes the external-command. Note! normally external-command
1207 should be enclosed in double quotes.
1208 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1209 it should normally be off in a production system.
1211 kes Implement die command for SD so that we can force it to dump.
1212 kes Implement SD lock debug code.
1213 kes Implement new algorithm for keeping Volume list in SD. It
1214 is now owned by the device.
1216 kes Implement new code for freeing in use volumes that should
1217 resolve if not all, some of the problems of multiple drive
1218 tape conflicts described in bug 801.
1220 kes Fix gui/bacula-web/images files in svn.
1221 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1223 ebl Fix a bug in batch mode (in string escape)
1224 kes Correct migration prune SQL typo that crept in in a
1225 recent 2.1.x change.
1227 kes Move bnet_despool() into class in bsock.c
1228 kes Modify job report to include director name and Build OS.
1229 kes Move drop root privilege and check_catalog() before fork.
1230 kes Add update database scripts (version 9 to 10) to updatedb directory.
1232 ebl Check size and age of each file after its backup to see if
1233 it has changed during backup, if 'checkfilechanges' is set.
1234 The FD will do an extra check (stat(2)) after
1235 each file backup. mtime, ctime and size are compared with
1236 'before backup' information. If time or size mismatch, an
1237 error message will be generated. You must upgrade FD to use it.
1239 kes Make database name and user configurable
1240 --with-db-name=xxx --with-db-user=xxx
1241 kes Add back database type to message.c for debugging.
1243 kes Implement dir_sql() which issues an SQL query.
1244 kes Modify bat medialist to use dir_sql() and do some minor C++
1245 formatting as well as eliminating a number of pointers, simplifing
1248 kes Fix some of the mtx-changer grep commands for tape label readers.
1249 kes Convert a number of bsendmsg into the appropriate send/warning/error
1250 message class calls.
1251 kes Suppress the using database message in the .sql command.
1252 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1254 kes Add context menu for floating a window.
1255 kes Some minor cleanup and name changes in qt-console
1256 kes Add doing mt setblk 0 in Win32 mtx-changer.
1257 kes Apply Martin's bug fix to move definition of ENODATA for
1259 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1260 sqlite2 and sqlite3.
1262 kes More pruning cleanup.
1263 kes Turn on wait_for_drive by default in mtx-changer.
1264 kes Turn on Batch insert code by default as it now passes regression.
1265 kes Add ./configure --enable-bat to enable building of Bat.
1266 No install yet though.
1268 kes Implement a new .sql command for bat.
1269 kes Implement code to turn off pruning in obtaining the next volume.
1270 Pruning is turned off for the status dir command, but turned on
1271 for SD requests and for the list nextvolume command.
1273 kes Correct Qmsg() that was not updated correctly when committing a
1274 previous change (probably the recent TLS patch).
1276 kes Write new subroutine is_volume_purged() that explicitly checks
1277 if the Volume is purged, and if so marks it as such. This should
1278 resolve problems reported about needing to mount twice to recycle
1280 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1281 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1282 amount of duplicated code.
1283 kes Do volume pruning only for the Media Type desired (reduces pruning time
1284 if multiple Media Types are in the same pool).
1285 kes Implement more detailed info in the Job report for the Bacula version
1287 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1289 ebl Add bbatch tool to bench database and insert mode.
1290 Fix sql quote stuff in batch mode
1291 Fix sql stuff for mysql
1293 kes Correct problems with am/pm scheduling. Fixes bug #808.
1294 kes Implement new prunning code that prunes up to 1000 jobs at
1295 the same time. The same technique can be applied to a number
1296 of other prune/purge subroutines.
1297 kes Add an insanity check when starting a new tape job to ensure
1298 that the tape position has not been changed. If so fail the
1300 kes Fix Win32 build for dlls to add the folllowing:
1301 src/lib/bsock.c -- new file with new entry points
1302 src/lib/dlist.c -- new entry points
1303 src/cats/sql_create.c -- new entry point
1304 src/cats/sql_cmds.c -- new DATA item exported
1306 ebl batch mode cleanup bscan-test is ok now.
1307 kes Implement SD code to check length of disk volume before appending.
1309 kes Correct return status on db_batch... routines.
1310 kes Add call to db_write_batch_file_records() to migration code.
1311 ebl Fix AfterJob timing
1312 kes Move the checking of the database in initializion of the Director
1313 to after we drop privileges. This avoids the need for both root
1314 and bacula access to the DB.
1315 kes Correct a misplaced variable definition in src/filed/backup.c
1316 kes Correct how the new batch insert db_create_attributes_record()
1317 uses the arguments. Caused a seg fault in bscan.
1318 kes Implement lock() and unlock() methods in DEVICE class.
1319 Implement block() and set_block(xx) methods in DEVICE class.
1320 kes Modify bnet_connect() so that it uses time() to check for the
1321 wait time expiring (on some OSes, some system calls may not
1322 return immediately).
1323 kes Modify Verify to obtain the previous JobId when it is actually
1324 running rather than at schedule time (as it was in 1.38.x).
1325 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1327 kes When checking pid in pid file, continue running if the pid is
1328 the same as ours. This occurs on IRIX after a system crash.
1331 kes Extend new GUI API.
1332 kes Make the ua structure a class, and implement send_msg(),
1333 error_msg(), warning_msg(), and info_msg().
1335 kes Apply fix from for building wx-console on the Mac from
1337 kes Implement new select mechanism for GUI programs.
1338 kes Reorganize initialization of stackedWidgets in bat.
1340 kes Add updated nagios plugin supplied by Christian Masopust.
1342 kes More bat implementation.
1343 kes File migrate bug with Pool Occupancy using mediaid instead
1344 of jobids. Fixes bug #795.
1345 kes Fix orphaned buffers in filed backup and verify due to
1346 crypto buffers not freed during errors. Fixes bug #789.
1347 kes Extend new GUI api code to tree commands.
1348 kes Ensure that tree and dot commands check console ACLs.
1349 kes Permit marking directory with trailing slash.
1350 kes Allow 20 console connections (instead of only 10).
1352 kes Add smartctl call to bacula-sd.conf as an example of getting
1355 kes Modify jobq.c to let simultaneous restore jobs run. This may
1356 cause them to fail if they cannot get a drive.
1357 kes Add Client Connect Wait to Storage daemon to permit users to
1358 modify the time the SD waits for a FD connection.
1360 kes Correct virtual changer check which was backwards. This caused
1361 volumes to be unloaded into slots already occupied.
1363 kes Apply Command ACL filter to JobId list in restore command.
1364 kes Correct typeo in var.c patch.
1366 kes Don't let Bacula prune File or Job records for the current Job.
1367 kes Fix variable substitution pad + inc bug reported (with patch)
1370 kes Correct SQLite log table index as reported by Luca Berra.
1372 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1374 kes Begin implementing new comm signals for API.
1375 kes Fix a few places in lib/message.c where the open fd may
1377 kes Continue implementing lib/bsock.c (real class). Make jcr,
1378 who, host, and port private. There are new methods to access
1379 them for non-class use. This required touching a number of files.
1381 kes Add LANG=C to autoconf/randpass so it works with languages other
1382 than English. Fixes bug #788.
1384 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1386 You will not be able to generate Include/Exclude list any more.
1387 It will be fixed soon.
1388 If you want to use this, you can apply
1389 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1391 kes Restore of sockets created false error messages because Bacula
1392 no longer restores sockets, but the code was still trying to
1393 set the attributes on a non-existent file. Reported by a user.
1394 ebl finish RecyclePool feature
1395 Media will takes Pool.RecyclePool
1396 when moving from Scratch to a Pool or when user will do
1397 update volume=xxx frompool
1398 To use it, add RecyclePool = aPool to your Pool resource
1401 RecyclePool = Scratch
1405 kes Expand new BSOCK class adding signal() and new BNET signals.
1406 kes Begin enhancing the dot commands adding a new API function
1407 that returns more information and will make it easier
1408 to interface to the Director from a program.
1410 kes Make DEVICE fd private. Its new name is m_fd, and can be
1411 obtained with dev->fd() outside the class. This is the
1412 first of many DEVICE members to be made private.
1413 kes Implement Michael Renner's idea on having a virtual disk
1414 changer. I made some minor modifications (e.g. I did not
1415 implement the Virtual Changer directive, but simply set
1416 the Changer Command to an empty string.
1418 kes Implement a BSOCK send() method that writes the whole record
1419 in a single write() request rather than in two.
1420 ebl add update volume=xxx recyclepool=yyyy
1421 volume takes recyclepool from pool when using update volume=xxx from pool
1423 kes Fix encryption deblocking bug, which caused some restored files
1424 to be truncated. This fixes bug #763.
1425 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1426 kes Fix 12am/pm bug as reported in bug #782.
1428 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1429 ebl Use btime_t instead of uint64_t in media patch.
1431 kes Optimize the use of the database a bit in the Status dir command.
1432 Only open it when needed, ensure that if any previous database
1433 was opened, it is closed.
1435 kes Correct VolCatBytes bug from media patch.
1436 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1437 in the case of orphaned records.
1438 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1439 and File records in 300K chunks to be more efficient. This
1440 idea came from Juan Luis Frances (if I remember right).
1441 kes Apply Eric's scratch patch that moves a purged Volume to
1442 the RecyclePool. Question: how is RecyclePool set? what
1443 happens to the ScratchPool?
1444 kes Apply Eric's media patch that collects read/write media
1445 times as well as byte counts. This patch requires a
1446 simultaneous upgrade of the DIR and SD. Note, there
1447 should be some way to turn off timing. I'm not sure
1448 times are in Bacula units.
1449 kes Apply Eric's batch-insert patch.
1451 kes Update projects list.
1453 kes Implement Include/Exclude file lists in FD as dlists using
1454 the new dlistString class. This permits efficiently having
1455 large include/exclude lists and completes project Item 25.
1456 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1457 console is authorized to cancel the job. This fixes bug
1459 kes Modify SD so that the VolCatJobs medium record is updated
1460 at the beginning of a Job rather than the end. This
1461 fixes bug #775 where exceeding MaxVolJobs caused jobs
1463 kes Added a mutex around getting and setting Volume information
1464 so that multiple simultaneous jobs will single thread.
1466 Switch to using Subversion
1467 kes Remove src/pygtk-console/ from configure
1469 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1470 plus the entrypoints.
1471 kes Apply patch supplied that corrects debug print
1472 in canceling jobs for max run time. Supplied as
1473 part of bug #621, which was previously fixed.
1475 kes Test on job_canceled() and sd_msg_thread_done inside
1476 loop starting the message thread to avoid a race condition.
1478 kes Remove rl_catch_signal from console.c as it conflicted
1479 with the header definition. Fixes bug #765.
1480 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1482 kes Clarify some stored/acquire messages to indicate if the
1483 problem is with read or append.
1485 kes Fix memory leak with storage ids in cats/sql_get.c
1486 kes Terminate watchdog earlier to avoid reference to released
1487 memory -- reported by Jason Austin.
1488 kes Move closing the database from jobq.c to the director daemon
1489 termination routine. This fixes memory leaks for shadow jobs
1490 (i.e. migration jobs).
1491 kes Free up the unique jobid chain items in migrate.c. This fixes
1492 a memory leak problem.
1493 kes Convert some ugly looking for statements to use foreach_alist
1494 in findlib/find.c. This will facilitate converting the structures
1495 to use dlist (for large include/exclude lists).
1496 kes Fix a bug in the btree.c and btree.h routines, then rename them
1497 rblist and add them to be built in src/lib. Include some new
1498 methods written by Rudolf Cejka that make the code more readable
1499 (hides some of the ugly casting).
1500 kes Add set_next() and set_prev() methods which make the code much more
1501 readable. Also add a new dlistString class that facilitates storing
1502 strings in dlists. To be used in the large include/exclude lists.
1503 kes Make some trivial modifications to lib/tree.h that use rblist
1504 rather than dlist for storing the tree links. This was suggested
1505 by Rudolf Cejka. The result of this is that the restore tree now
1506 uses red-black binary trees rather than simple linked lists. This
1507 should give rather dramatic speed improvements for directories
1508 contining large numbers of directories/files (more than 10000).
1510 kes Fix maxruntime bug #621.
1512 ebl Implement the include JobID in spool file name project.
1513 kes Reorder projects file in order determined by Jan 2007 vote.
1514 kes Implement item #12 on project list -- quick release of FD by
1516 kes Fix open of SQLite3 db where user does not have write permission
1517 so that DIR does not crash. Fixes bug #761.
1519 kes Add back missing @ in Win32 Makefile.
1520 kes Change 'Device not configured to autolabel' from INFO
1522 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1523 which should restart an indefinite # of times.
1524 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1525 other DIR specifications.
1527 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1528 Fix path quoting in SQLite scripts.
1529 Fix problems with SHGetFolderPath.
1531 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1533 kes Fix Job restart on error bug that promotes an Inc to a Full
1534 backup. This should fix bug #755.
1535 kes Add qt-console and first cut of code.
1539 kes Fix Bacula->Documentation link on Win32 to point to index.html
1540 instead of bacula.html. Fixed bug #750.
1541 kes Return JobId in db_get_job_record() when JobId==0. This should
1543 kes Do not release source pointers when restarting a failed job.
1545 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1546 This *should* fix bug #747.
1547 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1550 kes Modify USTORE constructor to set an empty store_source string,
1551 and don't copy the store_source string in a cancel. Hopefully
1552 this will fix Arno's seg fault, bug #744.
1553 kes Add back code to disable conio in configure. Fixes bug #743.
1554 kes Correct the Options scanner in the FD to correctly handle
1555 SHA1 option, which was eating the next option. Reported by
1557 kes Add code to indicate when the SD is spooling, spool wait, and
1558 despooling as requested by Alan Brown.
1560 Version 2.0.0 released: 4 January 2007