1 Technical notes on version 2.2.x
6 kes Get fix for joblist bug in bat from trunk.
8 kes This patch fixes bug #1003 where putting the message output from
9 a Verify job into the catalog results in a recursive loop. The problem
10 seems to show up only with postgresql (to be verified).
12 kes Fix bug #942 where lots of emails where generated when the heartbeat
13 interval was low and Bacula wanted a different tape from the one in
16 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
17 which was updated during a restore (or a reading migration) bug #982
19 ebl Use qmake-qt4 instead of qmake when available (debian system).
21 kes Add a security warning to src/cats/make_catalog_backup.in indicating
22 that passing the password via the command line (arg 3) is insecure.
23 This responds to bug #990 (it doesn't fix it).
24 kes Apply 2.2.5-postgresql-errors.patch
25 kes Remove unneeded File table index on JobId, which is already
26 present as the first index of another multi-index.
28 kes Set default debug_level to zero. This corrects bugs #991 and #993.
29 kes Fix a crash in bat when it cannot connect to the Director for example
30 if the Director is not running.
32 kes Activate Close button on tray-monitor window. This fixes
35 kes Fix spurious warning message printed when creating a volume with
36 a LabelFormat. This fixes bug #976.
40 kes Add JobId in place of Job name in all the Jmsg() output.
41 kes Correct the APP_DESC for the Win32 storage service (remove an e).
43 kes Add new SD despooling attributes and Dir inserting attributes
44 job status codes. This fixes bug #961.
45 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
47 kes Fix doc issue. This fixes bug #963.
48 kes Fix listing performance problems in bat. Pointed out by
50 ebl Fix replace on restore. This fixes bug #969
51 kes Fix bat code that tests for Win32. This should fix bug #968
52 kes Query 5 list wrong Vol after migration. This fixes bug #960
54 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
55 in back porting from 2.3.x
57 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
58 The details are included in the notes in this file.
60 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
61 messages; it fixes a problem opening the SQLite3 database when multiple
62 simultaneous jobs were running; it fixes a bug with certain versions of
63 MySQL where batch inserts failed because of table name character case
64 (upper/lower) differences.
65 kes Fix race condition that drops final block written to volume.
66 This happens in rare cases with multiple simultaneous jobs
67 when the Volume fills. This fixes bug #964. May be related
68 to bug #935 and possibly #903.
70 kes Fix FD->SD authorization failure, which was due to spurious
71 wakeups from a pthread_cond_timedwait(). Simply check the
72 predicate before continuing. This fixes bug #953
73 dvl Add new configuration item --archivedir
74 dvl Adjust regression tests to use tmp not /tmp. This will allow
75 multiple concurrent runs of the regression tests.
77 kes Fix race condition that drops final block written to volume.
78 This happens in rare cases with multiple simultaneous jobs
79 when the Volume fills. This fixes bug #964. May be related
80 to bug #935 and possibly #903.
81 kes Eliminate more strerror() and replace with bstrerror().
82 kes Remove BSD getopt and replace with unrestricted IBM version.
83 kes Fix Win32 build for changed calling sequences.
85 kes Fix FD->SD authorization failure, which was due to spurious
86 wakeups from a pthread_cond_timedwait(). Simply check the
87 predicate before continuing. This fixes bug #953.
88 kes Add const char where needed (more to do).
90 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
91 kes Don't overwrite error message in check_tables_version.
93 kes Unlock batch insert tables with same calls used elsewhere.
94 kes Allow starting 59 jobs a second.
95 kes Make SD session key more random.
96 kes Add retry for SQLite opening db if it fails. Probably helps
98 kes Suppress extra error messages during batch insert failure.
100 kes Put some FD auth code on dbglvl rather than fixed.
101 kes Return insert attributes error message in db msg buffer to avoid
102 false error messages. Helps fix bug #966.
103 kes Separate batch init error messages. Probably helps fix bug #966.
104 kes If Dir gets an error during inserting attributes, cancel SD.
105 This reduces unnecessary error messages.
107 ebl Cleanup batch insert code. Probably fixes bug #965.
109 kes Turn off some code when batch insert not enabled.
110 kes Edit FD name in connect error messages.
112 kes Add code to handle tray monitor separated from Win32 FD.
113 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
115 kes Fix ANSI tape labeling. This fixes bug #954.
116 kes Increase the max block size to 4MB fixes bug #957.
117 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
118 is not properly mounted (recognized) during a poll.
119 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
120 Job that has differences reports Verify OK.
122 Release Version 2.2.4
124 kes Increase size of name string when FD making connection to SD.
127 kes Add code to try to fix bug #908.
128 kes Add waits to multiple exit detection code to try to force pid
129 file to always be deleted.
130 kes Restore good dev.tar.gz to rescue set appropriate binary property.
132 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
133 trying to switch drives by checking for blocking before unblocking.
135 kes Cancel storage daemon in all cases where FD reports error. This
136 should fix virtually all cases of bug #920.
138 kes Fix error message that was clobbered when Dir tells SD it does not
139 have write permission on Volume. This should fix a minor point
140 in bug #942, but not the main problem.
141 kes Add code to cancel job in SD if FD connection fails. This should
143 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
144 kes Fix migration code to get correct Volume name with multiple volumes
145 by skipping |. Fixes bug #936.
146 kes Implement patch supplied by Landon to fix bug #944 where using
147 TLS with bconsole uses 99+% of the CPU.
148 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
150 kes Move patches into patches directory.
152 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
155 ebl Using "m" in bconsole will show messages like before,
156 and not memory usage.
158 Release Version 2.2.3
159 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
162 kes Fix bug #935, and probably also bug #903 where files were not
163 restored. MediaId was not properly set in JobMedia record after
166 kes Add ./configure search in qwt-qt4 for qwt package
167 kes Apply Martin Simmons patch that should turn off the new API usage
168 when batch insert is turned off allowing building on older
171 Release Version 2.2.2
173 ebl Detect if new PosgreSQL batch insert API is present.
174 kes Correct incorrect mempool call causing Director crash.
175 sb Update spec files for 2.2.1 release
177 Release Version 2.2.1
179 kes Update POTFILES.in
180 kes Cleanup a few underquoted AC_DEFUNs in configure
181 kes Apply patch from Martin Simmons that adds a test for va_copy to
184 kes Fix bug 921 by increasing the number of tries to create a new volume
186 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
187 can be called multiple times. Implement a version for machines
188 without va_copy() that gets a big buffer.
190 kes Integrate more portable zone offset code into bsmtp.c
191 Submitted by Attila Fülöp.
193 kes Fix bad SD->FD return status reported by
194 (James Harper) <james.harper@bendigoit.com.au>
195 ebl Fix a bug in read_close_session which return random status
196 thanks to James Harper
198 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
199 and directory names during restore of single file/directories.
200 kes Add sanity checks to .sql command when string is empty. Hopefully
201 that will resolve Dirks Director crash.
203 kes Apply patch submitted by Martin Simmons that corrects a seg fault
204 in the bsmtp chat subroutine when debug is >= 10.
206 kes Fix Director crash when running bat SQL queries.
207 kes Add David's notes on Item 8: Copy pools.
209 kes Rework projects file to be current and ready for a vote.
210 kes Enhance lex scanner error message.
212 kes Tweak LICENSE file to mention BSD code.
213 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
214 if specified on the ./configure.
215 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
216 This class is intended to allow us to open a second bsock to the
217 Director while in the restore subdialog.
219 kes Fix configure to create bat Makefile before creating dependencies.
220 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
221 kes Add a tooltip to the tray monitor.
222 dvl Set the Director's PID file before dropping privs. This fixes
225 kes Update AUTHORs file
226 kes Increase the default max concurrent jobs to 20 in FD and SD to
227 correspond with the default .conf files.
228 kes Rewrite the Win32 service routines. This eliminates the 3 copies
229 some different, of the same file created by RN when porting the
231 kes Rearrange some of the Win32 directories and the placement of the files
233 kes Set DEVELOPER flag in version.h
235 ========================================================================
236 Release Version 2.2.0
238 kes Apply a second doc patch from Marc.
239 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
240 improves the tips section that discusses how to setup multiple
243 kes Update bat README file.
244 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
245 corrects a typo in the Recycle status check in db_find_next_volume().
246 This will probably fix a number of annoying problems with multiple
248 kes Modify most of dird/msgchan.c to use bsock class calls rather than
249 bnet calls -- no functionality change.
251 kes Modify the Verify output to specify if files are missing on
252 the Volume(s) or disk. Fixes confusion in bug #916.
253 kes When more than one Volume is read in a migration job, the last
254 Volume bytes reported are from the last read volume rather than
255 the last written volume. Fixed. This fixes bug #910.
256 kes Fix display of Recycle flag after update volume=foo recycle=yes.
257 It previously printed New Recyle flag is: no. This fixes bug
260 kes Correct seg fault when switching tape drives during restore.
261 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
262 be used until after 2.2.0 release.
264 kes Remove fnmatch() in SD that permitted wild card specifications.
267 kes Fix %g in filename returned by SQL for browse tree reported by
269 kes Fix configure so that it puts config.out in the cwd rather than
271 kes Attempt to fix the locking problem reported by Eric in bug #906.
272 kes Make berrno class to leave errno unchanged after constructor call.
273 kes Make bnet_server use the heap rather than the stack to allocate
274 its socket fd pointers to avoid a crash at termination. Problem
275 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
277 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
278 and putting it in depkgs-qt along with Qt4.3.
280 kes Rework code in acquire.c that switches drives for reading when
281 the Media Type does not match. This should fix bug #906
283 ebl Fix a director segfault during job setup #907
284 kes Correct seg fault in postgresql when first operation returns no
285 rows. Fixes Dirks File browser problem seg fault with bat.
287 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
288 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
291 kes Implement PopUp YES/NO dialog for bat.
293 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
295 kes Correct RunScript to terminate job in FD on failure.
296 kes Change abort_on_error and AbortJobOnError to fail_on_error
297 and FailJobOnError in RunScripts.
298 kes Minor tweaks of code formating in RunScripts, principally to
299 avoid depassing 80 columns.
301 kes Eliminate one #ifdef Win32 in bsmtp
302 kes Implement grow tool to grow a file for testing very large databases.
303 kes Add big-vol-test to test Bacula seeking with > 5GB.
306 kes Modify find_next_volume() to return all values in Media record.
307 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
311 kes Update Release notes
313 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
314 Warning, in previous beta version, all media get from scratch keep their
317 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
318 This should fix bug #842. Made a note to look at removing the temp
319 files at the end of the install.
320 kes Add ability to mount and unmount a file device providing it is
321 marked as being removable and has the appropriate mount and unmount
322 commands defined in the Device resource. This fixes bug #830.
323 kes When applying a storage override, release all previous storage
324 definitions rather than just prepending the new storage.
325 This should prevent a good deal of confusion.
327 kes Implement ./configure search for qwt libraries.
329 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
330 Win32 FD. This should fix bug #893.
331 kes Remove an unnecessary beep in Win32 init code.
332 kes Update copyright dates in Win32 executable about boxes.
333 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
334 code with a BSD getopt.c and getopt.h.
335 kes Remove sched.h from the Win32 compat directory -- not used.
336 kes Remove the Exit menu item from the Win32 tray monitor. If you really
337 need to shut it down, do it through the services panel or the command
339 kes Remove some inappropriate Bacula FSFE copyrights.
340 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
341 kes Fix regress config non-portable test as pointed out by
342 Florian Heigl <florian.heigl@gmail.com>
343 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
344 as pointed out by Florian Heigl <florian.heigl@gmail.com>
346 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
347 Reported by Frank Sweetser.
351 kes Fix client-only build.
352 kes Integrate client-only fixes for bsys (initgroups) and conio from
353 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
354 kes Make arguments to get_scratch_volume() in same order as other
356 kes Rework the prune_volumes() subroutine so that after purging and
357 no volume found in desired pool, it will check for a scratch
358 volume. This prevents recycling the whole scratch pool.
359 kes Add code to status storage to print boffset_t (largefile support).
361 kes Move qwt (Graphics libarary for Qt4) to depkgs.
362 kes You now need a --with-qwt=<dir> to be able to build bat.
363 kes Update src/win32/cats/bacula_cats.def to include the new
364 db_get_query_dbids() call on Win32.
366 kes Correct a problem when selecting a scratch volume and moving
367 it to another pool that lost some columns.
368 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
369 kes Enhance Autochanger error messages to include Volume and device name.
370 kes Rework prune_volumes() code to take account of InChanger flag,
371 and to handle recycling volumes going to the Scratch pool and
372 current pool because the RecyclePool directive.
373 kes Implement a better and more efficient db_get_query_dbids() to
374 handle creating and passing back a list of DBIds.
378 kes Start work on new more efficient DBId subroutine. First use
379 will be for recycling volume to Scratch inchanger.
380 kes Increase number of JobIds in pruning from 1000 to 10000.
381 This to be replaced by above routine.
382 kes Begin implementation of building Qt4 on Win32.
383 kes Correct typo in fix I added for bad TLS shutdown.
384 kes Pull 2.0.3 patches into patches directory.
385 kes Update Release notes. Include qt-console in line count.
386 kes Update Projects file.
388 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
389 bug in migration code where a job that spanned two volumes
392 kes Implement new BST_DESPOOLING blocked state. Change from locking
393 during despooling in SD to blocking. This means that other threads
394 can work with the device structure, in particular the reservations
395 system while despooling.
397 kes Fix return in reservation message queue that missed clearing
398 the jcr lock (implemented 26Jun07 below).
399 kes Rename a number of dev methods to make locking function names
401 kes Document locking in lock.c. Move lock structures to new file
404 kes Move reservations message lock to lock jcr only this
406 kes Move main SD locking code into lock.c (new file).
407 kes Update Win32 build to include lock.c
411 kes Dirk committed the qwt library code for drawing graphs in bat.
412 kes Tweak install of qwt so that it is integrated with ./configure.
414 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
415 out by Eric (my typo).
416 ebl Fix configure.in to get batch mode enable
417 kes Return correct string from authenticate.cpp in bat when connecting
419 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
420 spurious line drops when using TLS.
421 kes Do not file reparse points when restoring a file that already
424 kes Implement Windows reparse points -- similar to directories, but
425 we do not descend into it. This is a first cut. They seem to
426 be backed up, but restore is not yet tested.
427 kes Remove restore_blocking in tls code when shutting a socket to leave
428 it in blocking mode. Hopefully this will fix the encryption bug
429 reported by Frank Sweetser.
430 kes When opening a file for backup, tell the OS that we are going to
431 read it sequentially -- optimization.
432 kes Change variable names in authenticate_director() to not conflict
433 with member names in bat. Caused great confusion with compiler,
436 kes Queue openssl error messages in case of comm problem.
437 kes Do shutdown() call if socket terminated.
438 kes Remove some duplicated code in tls.c
439 kes Move more of the bsock member variables into private and access
441 kes Add Frank Sweetser's tls-test to the regression suite.
443 kes Add Swedish sv.po file
445 kes Don't print clock skew message in FD if less than 3 seconds diff.
446 kes Add a bit of VSS info to status client.
447 kes Implement a first cut of Vista VSS, using Win2003 code.
452 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
453 loaded tape but uses first drive).
454 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
455 This was indeed a Win32 issue.
457 kes Simplify search of autochanger for in-use Volume.
458 kes Fix exit condition of check for in-use volume. kes Remove
459 inappropriate my_postgresql_free_result() in db_close()
461 kes Fix bad return in FD when encryption signature not found.
462 Probably caused a crash.
463 kes Inhibit missing encryption signature error messages for
464 file types where no signature computed.
465 kes Correct inverted check on autochanger in reservation system.
466 kes Tweak debug code in autochanger reservation.
468 kes Add some additional locking in the cats directory in subroutines
469 that modify packet variables called from batch insert.
470 kes Rework how dcrs are allocated. new_dcr() can now be called
471 with an existing pointer, and it will simply clean it up.
472 This allows the reservation system to test various different
473 devices, and will permit easy device changes.
474 kes A bunch of changes all over to handle new new_dcr() calling
476 kes Work more on the Volume management in the SD. Remember Volumes
477 for tape drives and for autochangers (even virtual disk changers).
478 kes When looking at the Volume list to reserve a drive, handle
479 autochanger names correctly by interating through the changer
480 devices. Also call the Director to see if a Volume is suitable
482 kes Fix some bugs in bscan. Make sure all media records are written.
483 Make sure that valid JobMedia records are written for disk files.
484 Previously they were completely wrong.
485 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
486 that the URLs don't change and so that the developers will all
487 work off the same copy. Rebuild from scrach.
488 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
492 kes Fix seg fault in FD from incorrect digest size.
493 kes Fix argument to non-OpenSSL crypto.c subroutine.
497 kes Remove a few malloc()s from the encryption code.
498 kes Use the class calls to bsock in filed/backup.c and restore.c in
499 place of the old bnet_xxx code.
500 kes Implement code that does an on the fly calculation of the
501 signing digest during restore of encrypted files. It makes
502 a best guess at the algorithm, and if it is not correct, will
503 then revert to the old code which reads the file after it is
505 kes Implement at least one missing crypto stream in stream_to_ascii()
506 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
507 #877 where a reload with bad syntax causes Dir to exit.
509 Cut: 2.1.14 beta (not released)
511 kes Do not free a volume on a tape drive until another volume is
512 mounted and read, or the autochanger unloads the volume.
513 This should help the SD re-use volumes that are already mounted,
514 and should fix bug #886.
515 kes Apply patch from user brettedgar that allows gnome2-console include
516 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
517 kes Apply patch from Lucien Weller that fixes day of week calculation
518 because of DST flag problem. Fixes bug #887.
520 kes Move find_next_appendable_volume() to after acquiring a valid device
521 in reserve.c. This fixes bug #864 -- confirmed by reporter.
523 kes Unable to reproduce bug 872. However added additional testing for
525 kes Bug #874 resolved by documenting SQLite limitations.
526 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
527 kes Bug #881 resolved by removing typo in mtx-changer script.
528 kes Made Frank Sweetser's wiki the official Bacula wiki with his
529 approval. Added a link to the wiki on the web page, and implemented
530 a backup from http://paramount.ind.wpi.edu
532 kes Fix update allfrompool to pass pool name.
534 kes Convert to pure GPL v2 license.
535 kes Fix sscanf problems reported by Peter Buschman that caused
536 a bus error on Solaris.
537 kes Rework (simplify) the select prompt in bat.
538 kes Move get_jobid_from_tid() into lib and create a
540 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
541 should definitely fix the problem of lost error messages in the
543 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
544 kes Eliminate tcpd.h from the project. Enclose the #include from the
545 library with extern C ...
546 kes Add print of signal name when a signal is trapped.
550 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
552 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
553 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
554 makes SQLit3 run 30 times faster, though a bit less safe.
555 kes Implement --with-batch-insert in configure and detection of thread
556 safe libraries. It is on by default, but turned off if no thread
557 safe library (e.g. SQLite 2) is available.
559 kes Fix Bacula PostgreSQL buffer overruns.
560 kes Do better checking for NULL results returned from PostgreSQL;
561 implement retry for failed queries; clear results buffer after
562 failed query. Hopefully this will correct the PostgreSQL failures.
564 kes Implement algorithm to handle only one appendable volume with
565 Prefer Mounted Volumes = no.
566 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
567 returned from a query.
568 kes Make volume lock recursive.
569 kes Implement an additional volume reservation algorithm that
570 starts by considering all reserved volumes then uses the
571 old brute force algorithm of searching the resources to
572 find a suitable device.
573 kes Add new reservations debug code and refine the old code.
574 kes Update the win32/dll/bacula.defs file.
576 kes Tweak reservations algorithm to permit a few more cases, i.e.
577 volume reserved, but on different drive, ...
578 kes Enhance SD status to include Pool and Media Type for drive in a
579 more readable format (a bit longer).
580 kes Fix PostgreSQL double free.
582 kes Minor refactoring of restore decryption code.
583 kes Add code to smartall.c to detect double free of a buffer.
585 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
586 so that bsmtp will create a correct email address (mailbox only).
587 kes Modify 'memory' command so that the buffers are listed as 'In use'
588 to avoid confusion with Orphaned buffers.
589 kes I reworked the OpenSSL include/lib flags to be handled in
590 the standard Bacula way, which should fix bug #863 concerning
591 non-standard OpenSSL libraries.
593 kes Implement Help Browser window for bat.
594 kes Fix reload bug that reset StorageId to zero.
596 kes Fix TLS #ifdefing when TLS turned off.
597 kes Ensure that when labelling a tape with Slot=0 that InChanger
599 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
601 kes Add StartTime to final uar_sel_jobid_temp query so that we can
602 add DISTINCT (required by PostgreSQL).
603 kes Implement BSOCK authenticate_director() method. Eventually will
604 authenicate all daemons.
605 kes Move several more functions into the BSOCK class.
607 kes Add code to tell the OS that we no longer need a cached
608 file that we were reading. In findlib/bfile.c. Also,
609 only cache files that we are reading. Thanks to
610 Tobias Oetiker <tobi@oetiker.ch> for the idea.
611 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
612 kes Implement script to automatically generate cats and dll .def
614 kes Update README.mingw32 to include new .def file generation.
615 kes Correct typo in UTF-8 error message as reported by:
616 jhernandez <julianhernandez@gmail.com>
617 kes Add additional sm_check() code on debug level 1.
618 kes Set default debug level to 1.
619 kes Trap SIGABRT in attempt to get traceback.
621 kes Reduce bat connect timeout from 30 to 15 seconds.
622 kes More restructuring and implementing BSOCK class in place of
624 kes Remove a few unnecessary malloc() tests in crypto code.
625 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
626 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
627 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
629 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
631 kes Fix Verify InitCatalog. The attributes were not pointing to the
632 correct saved location.
633 kes Implement message callback so that GUI is sure to get all
634 daemon messages. Currently displayed in a dialog in bat.
635 kes Ignore SIGUSR2 (Bacula timer) in bat.
636 kes Apply regress patch from bug #859 to allow regress to work
637 with Solaris compiler.
639 kes Begin adding TLS support to bat.
640 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
641 clean up lex.c and make it more readable.
643 kes Move more bnet functions into the BSOCK class.
644 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
645 kes Complete change of berrno strerror() method to bstrerror()
649 kes Cleanup incorrect email addresses in bsmtp.
650 kes Make bat display initial messages rather than discard them.
652 kes First cut of adding .mod to the run command.
653 kes Implement auto display of messages in bat.
654 kes Enhanced preferences to allow all Bacula output to be
657 kes Fixed bug #856 autochanger documentation.
658 kes Rework bsmtp date editing for Win32. This fixes bug #854.
659 kes Add new cats entry point so Win32 builds.
661 kes Attempt to fix bsmtp date editing on OSes without %z editing.
662 kes Do better checking for the MySQL 64 bit libraries looking for both
663 .a and .so libraries.
664 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
665 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
666 kes Require the thread safe version of MySQL during configure. Thanks
667 to Andre Noll for pointing this out.
668 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
669 continuing in migration code.
670 kes Apply implementation of tray-monitor font derived from gnome-console
671 submitted by Andreas Piesk <a.piesk@gmx.net>
673 kes Eliminate important memory loss in SQLite
674 kes Fixed the batch insert MySQL thread specific data that was not
675 being freed. See cats/mysql.c:db_thread_cleanup().
676 kes Fix restore before command.
677 kes Convert old hdr.name to name() in a few places.
678 kes Implement update jobid command.
679 kes Return all time_t dates in db_get_job_record()
680 kes Stop watchdog in SD earlier.
681 kes Put Pool just after Storage in please mount message.
682 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
685 kes Update the po files.
686 kes Fix Verify InitCatalog by making it cache attributes.
688 kes Change name bacula-bat to bat for man 1 page to correspond to
690 kes Check for client and store NULL pointers in status command. This
692 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
693 kes Fix sign extended editing of %p.
694 kes Clean out a little old #ifdefing in cats/mysql.c
696 kes If time diff between DIR and FD is more than 600 seconds convert
697 INFO message to WARNING.
698 kes Implement heap size display in status for all daemons.
699 kes Attempt to fix MySQL db open memory loss (not successfull).
700 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
701 kes Eliminate memory loss in MySQL (possibly other SQLs) during
702 Query. This looks like a MySQL but but by doing extra releases,
703 the memory goes away. This should fix bug #847.
705 kes When backup fails, cancel SD before waiting for sd termination.
706 kes If SD is waiting for FD to connect during cancel, wake up the
708 kes Fix fsf code so that errno is correctly reported.
709 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
711 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
712 the original jobb's FileSetId.
713 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
714 spooling in migration jobs. Not yet tested.
715 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
716 reading conf file from a pipe. However, do it with open_bpipe()
717 rather than popen. Not yet tested.
719 kes Fix an ugly bug where the VolCatBytes were getting updated
721 kes Implement bconsole memory command that prints current memory
722 usage, plus smartalloc dump.
723 kes Clarify some error messages in backup, admin, and migrate.
724 kes Shrink label dialog to smaller size.
725 kes Invert Cancel OK buttons on restore to be OK Cancel.
726 kes More strerror() to bstrerror() conversions.
728 kes Start implementing bstrerror() in place of strerror().
729 kes First cut at stripping path -- seems to work.
731 kes Prevent door and port files from being restored (mostly
733 kes Free an unreleased buffer in compat code.
734 kes Change console Job name from *Console* to -Console- to eliminate
735 Win32 filename problems. Put Win32 path separator when creating
736 Console file. This fixes bug #846.
737 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
739 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
741 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
742 to force Win32 error message.
744 kes First cut strip path. The data should be passed to the FD,
745 but nothing is done with it yet.
746 kes Enhance the digest and signature routines in the crypto
747 library to accept a JCR and to use it to print error messages
748 so that they will go in the Job report rather than the daemon's
750 kes Simplify some of the verify signature code.
751 kes Simplify a few of the alternative returns in the signature
754 ebl Use only POSIX regex instead of GNU regex in breg.c for
755 File relocation. It fix broken freebsd compilation.
756 kes Convert all other Dir files to use ne ua class message
758 kes Tentative fix for missing digest signature in bug 807.
759 kes Correct handle problem in new win32_ftruncate routine.
760 kes Convert ua_purge.c and ua_update.c to use new ua class
761 message routines for bat.
763 kes Correct incorrect installation of LICENSE in Win32 installer.
764 kes Display LICENSE at the beginning of the Win32 install.
765 kes Attempt to correct the need for the png files to be installed
767 kes Reapply my bat.conf install script in qt-console. I think I
768 editted bat.pro instead of bat.pro.in and it was lost.
769 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
770 the /var/lock/subsys for subsysdir. Also corrects typos in the
773 kes First cut update job.
774 kes Correct configure to include qmake of src/qt-console directory.
776 kes Make restore job yes/mod/no print in one command so GUI works.
777 kes First cut implementing backup and restore client.
778 kes Correct editing in Verify output that caused a seg fault.
780 kes Insure that bat.conf is not overwritten during installation.
781 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
782 while I was implementing migration in March 2006 !
784 ebl Cleanup file relocation, using char *RegexWhere instead of
785 char *where + bool where_use_regexp
786 kes Update some manpages and add bat manpage.
787 kes Make a first cut at converting bacula.spec.in for bwx-console
789 kes Apply patch from John Goerzen to add hostname as fourth argument
790 to make_catalog_backup script.
791 kes Fix typos I introduced into bsmtp.c
792 kes Make pm_strxxx() routines handle input of NULL pointer. This
793 is to protect from NULL pointers returned from SQL databases.
794 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
795 kes Add more debug to FIFO code -- fix fifo regression test.
797 kes Implement posix_fadvise in FD, and for reading spool files in SD.
798 kes Add thread timer to bnet_connect() to break from OS if wait time
801 kes Update Win32 build to include new files, new symbols, and
803 kes Implement socket level heartbeat (tcp_keepidle)
804 ebl Commit File relocation patch
805 kes Make bat have 'make install' target.
806 kes Warn during install if old gnome-console binary found.
807 kes Warn during install if old wx-console binary found.
808 kes Add -8 option to bsmtp command line to add content type utf-8.
809 Fixes bug #809. (Character coding problem in bsmtp).
810 kes If < is found in target (from, to, cc) then do not enclose the
811 target in < > in bsmtp. Fixes bug #772 (malformed address).
812 kes When printing certain items in dbcheck, stop after 300000.
813 Fixes bug #822. (dbcheck loops).
814 kes Incorrect status in Dir after waiting for mount with poll set.
817 kes Extend idea of Prefer Mounted Volumes to mean a volume about
819 kes Print waiting to reserve a device every 5 mins.
821 kes Don't call close_part in label.c if tape and relabel.
822 kes Don't free volume if busy in close() -- should help with
824 ebl Fix #824 RunScript bug (After script could be execute twice)
825 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
826 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
827 Add a regression script to test RunScript
829 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
832 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
833 deprecated. No additional bugs will be fixed, and they will be dropped
834 in a future release (probably 2.4.0).
835 kes Change name of wx-console to bwx-console to make it more Bacula
837 kes Change the name of gnome-console to bgnome-console to make it
840 kes Some time in March, a Feature Request with patch from Jorj Bauer
841 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
843 The ability for the director to validate a Client (FD) CN against
844 an arbitrary set of patterns rather than the hostname, with
845 A new 'TLS Allowed CN' set of directives which are implemented
846 in the Client resource. Then pattern matching is used in place
847 of hostname matching against the Certificate's CN. As an example, we
848 have certificates which (a) use a local CA, and (b) have a CN of the
850 kes Add new/changed entry points to Win32 build
851 kes Create unaccepted-projects for projects that are not accepted.
852 kes Simplify locking in the reservations system.
853 kes Add more debug code in reservations.
854 kes Make sure error condition on reserving a volume is handled correctly.
855 kes Correct handling of volume_in_use.
856 kes Correct handling of initializing a device.
857 kes Move handling of broadcasting releasing a device into release_device().
858 kes Correct attaching dcr to dev so that it is only done if device
859 is properly initiated.
861 kes Locking debug level tweaks in SD.
862 kes Tweak new Volume code.
864 kes Add exec external-command [wait-seconds] to bconsole. This
865 executes the external-command. Note! normally external-command
866 should be enclosed in double quotes.
867 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
868 it should normally be off in a production system.
870 kes Implement die command for SD so that we can force it to dump.
871 kes Implement SD lock debug code.
872 kes Implement new algorithm for keeping Volume list in SD. It
873 is now owned by the device.
875 kes Implement new code for freeing in use volumes that should
876 resolve if not all, some of the problems of multiple drive
877 tape conflicts described in bug 801.
879 kes Fix gui/bacula-web/images files in svn.
880 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
882 ebl Fix a bug in batch mode (in string escape)
883 kes Correct migration prune SQL typo that crept in in a
886 kes Move bnet_despool() into class in bsock.c
887 kes Modify job report to include director name and Build OS.
888 kes Move drop root privilege and check_catalog() before fork.
889 kes Add update database scripts (version 9 to 10) to updatedb directory.
891 ebl Check size and age of each file after its backup to see if
892 it has changed during backup, if 'checkfilechanges' is set.
893 The FD will do an extra check (stat(2)) after
894 each file backup. mtime, ctime and size are compared with
895 'before backup' information. If time or size mismatch, an
896 error message will be generated. You must upgrade FD to use it.
898 kes Make database name and user configurable
899 --with-db-name=xxx --with-db-user=xxx
900 kes Add back database type to message.c for debugging.
902 kes Implement dir_sql() which issues an SQL query.
903 kes Modify bat medialist to use dir_sql() and do some minor C++
904 formatting as well as eliminating a number of pointers, simplifing
907 kes Fix some of the mtx-changer grep commands for tape label readers.
908 kes Convert a number of bsendmsg into the appropriate send/warning/error
910 kes Suppress the using database message in the .sql command.
911 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
913 kes Add context menu for floating a window.
914 kes Some minor cleanup and name changes in qt-console
915 kes Add doing mt setblk 0 in Win32 mtx-changer.
916 kes Apply Martin's bug fix to move definition of ENODATA for
918 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
921 kes More pruning cleanup.
922 kes Turn on wait_for_drive by default in mtx-changer.
923 kes Turn on Batch insert code by default as it now passes regression.
924 kes Add ./configure --enable-bat to enable building of Bat.
925 No install yet though.
927 kes Implement a new .sql command for bat.
928 kes Implement code to turn off pruning in obtaining the next volume.
929 Pruning is turned off for the status dir command, but turned on
930 for SD requests and for the list nextvolume command.
932 kes Correct Qmsg() that was not updated correctly when committing a
933 previous change (probably the recent TLS patch).
935 kes Write new subroutine is_volume_purged() that explicitly checks
936 if the Volume is purged, and if so marks it as such. This should
937 resolve problems reported about needing to mount twice to recycle
939 kes Rewrite pruning algorithm to do more work in the SQL engine, and
940 to pass a list of JobIds to be deleted to SQL. Also, minimize the
941 amount of duplicated code.
942 kes Do volume pruning only for the Media Type desired (reduces pruning time
943 if multiple Media Types are in the same pool).
944 kes Implement more detailed info in the Job report for the Bacula version
946 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
948 ebl Add bbatch tool to bench database and insert mode.
949 Fix sql quote stuff in batch mode
950 Fix sql stuff for mysql
952 kes Correct problems with am/pm scheduling. Fixes bug #808.
953 kes Implement new prunning code that prunes up to 1000 jobs at
954 the same time. The same technique can be applied to a number
955 of other prune/purge subroutines.
956 kes Add an insanity check when starting a new tape job to ensure
957 that the tape position has not been changed. If so fail the
959 kes Fix Win32 build for dlls to add the folllowing:
960 src/lib/bsock.c -- new file with new entry points
961 src/lib/dlist.c -- new entry points
962 src/cats/sql_create.c -- new entry point
963 src/cats/sql_cmds.c -- new DATA item exported
965 ebl batch mode cleanup bscan-test is ok now.
966 kes Implement SD code to check length of disk volume before appending.
968 kes Correct return status on db_batch... routines.
969 kes Add call to db_write_batch_file_records() to migration code.
970 ebl Fix AfterJob timing
971 kes Move the checking of the database in initializion of the Director
972 to after we drop privileges. This avoids the need for both root
973 and bacula access to the DB.
974 kes Correct a misplaced variable definition in src/filed/backup.c
975 kes Correct how the new batch insert db_create_attributes_record()
976 uses the arguments. Caused a seg fault in bscan.
977 kes Implement lock() and unlock() methods in DEVICE class.
978 Implement block() and set_block(xx) methods in DEVICE class.
979 kes Modify bnet_connect() so that it uses time() to check for the
980 wait time expiring (on some OSes, some system calls may not
982 kes Modify Verify to obtain the previous JobId when it is actually
983 running rather than at schedule time (as it was in 1.38.x).
984 kes Fix src/job.c to handle MaxWaitTime correctly. This should
986 kes When checking pid in pid file, continue running if the pid is
987 the same as ours. This occurs on IRIX after a system crash.
990 kes Extend new GUI API.
991 kes Make the ua structure a class, and implement send_msg(),
992 error_msg(), warning_msg(), and info_msg().
994 kes Apply fix from for building wx-console on the Mac from
996 kes Implement new select mechanism for GUI programs.
997 kes Reorganize initialization of stackedWidgets in bat.
999 kes Add updated nagios plugin supplied by Christian Masopust.
1001 kes More bat implementation.
1002 kes File migrate bug with Pool Occupancy using mediaid instead
1003 of jobids. Fixes bug #795.
1004 kes Fix orphaned buffers in filed backup and verify due to
1005 crypto buffers not freed during errors. Fixes bug #789.
1006 kes Extend new GUI api code to tree commands.
1007 kes Ensure that tree and dot commands check console ACLs.
1008 kes Permit marking directory with trailing slash.
1009 kes Allow 20 console connections (instead of only 10).
1011 kes Add smartctl call to bacula-sd.conf as an example of getting
1014 kes Modify jobq.c to let simultaneous restore jobs run. This may
1015 cause them to fail if they cannot get a drive.
1016 kes Add Client Connect Wait to Storage daemon to permit users to
1017 modify the time the SD waits for a FD connection.
1019 kes Correct virtual changer check which was backwards. This caused
1020 volumes to be unloaded into slots already occupied.
1022 kes Apply Command ACL filter to JobId list in restore command.
1023 kes Correct typeo in var.c patch.
1025 kes Don't let Bacula prune File or Job records for the current Job.
1026 kes Fix variable substitution pad + inc bug reported (with patch)
1029 kes Correct SQLite log table index as reported by Luca Berra.
1031 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1033 kes Begin implementing new comm signals for API.
1034 kes Fix a few places in lib/message.c where the open fd may
1036 kes Continue implementing lib/bsock.c (real class). Make jcr,
1037 who, host, and port private. There are new methods to access
1038 them for non-class use. This required touching a number of files.
1040 kes Add LANG=C to autoconf/randpass so it works with languages other
1041 than English. Fixes bug #788.
1043 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1045 You will not be able to generate Include/Exclude list any more.
1046 It will be fixed soon.
1047 If you want to use this, you can apply
1048 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1050 kes Restore of sockets created false error messages because Bacula
1051 no longer restores sockets, but the code was still trying to
1052 set the attributes on a non-existent file. Reported by a user.
1053 ebl finish RecyclePool feature
1054 Media will takes Pool.RecyclePool
1055 when moving from Scratch to a Pool or when user will do
1056 update volume=xxx frompool
1057 To use it, add RecyclePool = aPool to your Pool resource
1060 RecyclePool = Scratch
1064 kes Expand new BSOCK class adding signal() and new BNET signals.
1065 kes Begin enhancing the dot commands adding a new API function
1066 that returns more information and will make it easier
1067 to interface to the Director from a program.
1069 kes Make DEVICE fd private. Its new name is m_fd, and can be
1070 obtained with dev->fd() outside the class. This is the
1071 first of many DEVICE members to be made private.
1072 kes Implement Michael Renner's idea on having a virtual disk
1073 changer. I made some minor modifications (e.g. I did not
1074 implement the Virtual Changer directive, but simply set
1075 the Changer Command to an empty string.
1077 kes Implement a BSOCK send() method that writes the whole record
1078 in a single write() request rather than in two.
1079 ebl add update volume=xxx recyclepool=yyyy
1080 volume takes recyclepool from pool when using update volume=xxx from pool
1082 kes Fix encryption deblocking bug, which caused some restored files
1083 to be truncated. This fixes bug #763.
1084 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1085 kes Fix 12am/pm bug as reported in bug #782.
1087 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1088 ebl Use btime_t instead of uint64_t in media patch.
1090 kes Optimize the use of the database a bit in the Status dir command.
1091 Only open it when needed, ensure that if any previous database
1092 was opened, it is closed.
1094 kes Correct VolCatBytes bug from media patch.
1095 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1096 in the case of orphaned records.
1097 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1098 and File records in 300K chunks to be more efficient. This
1099 idea came from Juan Luis Frances (if I remember right).
1100 kes Apply Eric's scratch patch that moves a purged Volume to
1101 the RecyclePool. Question: how is RecyclePool set? what
1102 happens to the ScratchPool?
1103 kes Apply Eric's media patch that collects read/write media
1104 times as well as byte counts. This patch requires a
1105 simultaneous upgrade of the DIR and SD. Note, there
1106 should be some way to turn off timing. I'm not sure
1107 times are in Bacula units.
1108 kes Apply Eric's batch-insert patch.
1110 kes Update projects list.
1112 kes Implement Include/Exclude file lists in FD as dlists using
1113 the new dlistString class. This permits efficiently having
1114 large include/exclude lists and completes project Item 25.
1115 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1116 console is authorized to cancel the job. This fixes bug
1118 kes Modify SD so that the VolCatJobs medium record is updated
1119 at the beginning of a Job rather than the end. This
1120 fixes bug #775 where exceeding MaxVolJobs caused jobs
1122 kes Added a mutex around getting and setting Volume information
1123 so that multiple simultaneous jobs will single thread.
1125 Switch to using Subversion
1126 kes Remove src/pygtk-console/ from configure
1128 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1129 plus the entrypoints.
1130 kes Apply patch supplied that corrects debug print
1131 in canceling jobs for max run time. Supplied as
1132 part of bug #621, which was previously fixed.
1134 kes Test on job_canceled() and sd_msg_thread_done inside
1135 loop starting the message thread to avoid a race condition.
1137 kes Remove rl_catch_signal from console.c as it conflicted
1138 with the header definition. Fixes bug #765.
1139 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1141 kes Clarify some stored/acquire messages to indicate if the
1142 problem is with read or append.
1144 kes Fix memory leak with storage ids in cats/sql_get.c
1145 kes Terminate watchdog earlier to avoid reference to released
1146 memory -- reported by Jason Austin.
1147 kes Move closing the database from jobq.c to the director daemon
1148 termination routine. This fixes memory leaks for shadow jobs
1149 (i.e. migration jobs).
1150 kes Free up the unique jobid chain items in migrate.c. This fixes
1151 a memory leak problem.
1152 kes Convert some ugly looking for statements to use foreach_alist
1153 in findlib/find.c. This will facilitate converting the structures
1154 to use dlist (for large include/exclude lists).
1155 kes Fix a bug in the btree.c and btree.h routines, then rename them
1156 rblist and add them to be built in src/lib. Include some new
1157 methods written by Rudolf Cejka that make the code more readable
1158 (hides some of the ugly casting).
1159 kes Add set_next() and set_prev() methods which make the code much more
1160 readable. Also add a new dlistString class that facilitates storing
1161 strings in dlists. To be used in the large include/exclude lists.
1162 kes Make some trivial modifications to lib/tree.h that use rblist
1163 rather than dlist for storing the tree links. This was suggested
1164 by Rudolf Cejka. The result of this is that the restore tree now
1165 uses red-black binary trees rather than simple linked lists. This
1166 should give rather dramatic speed improvements for directories
1167 contining large numbers of directories/files (more than 10000).
1169 kes Fix maxruntime bug #621.
1171 ebl Implement the include JobID in spool file name project.
1172 kes Reorder projects file in order determined by Jan 2007 vote.
1173 kes Implement item #12 on project list -- quick release of FD by
1175 kes Fix open of SQLite3 db where user does not have write permission
1176 so that DIR does not crash. Fixes bug #761.
1178 kes Add back missing @ in Win32 Makefile.
1179 kes Change 'Device not configured to autolabel' from INFO
1181 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1182 which should restart an indefinite # of times.
1183 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1184 other DIR specifications.
1186 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1187 Fix path quoting in SQLite scripts.
1188 Fix problems with SHGetFolderPath.
1190 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1192 kes Fix Job restart on error bug that promotes an Inc to a Full
1193 backup. This should fix bug #755.
1194 kes Add qt-console and first cut of code.
1198 kes Fix Bacula->Documentation link on Win32 to point to index.html
1199 instead of bacula.html. Fixed bug #750.
1200 kes Return JobId in db_get_job_record() when JobId==0. This should
1202 kes Do not release source pointers when restarting a failed job.
1204 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1205 This *should* fix bug #747.
1206 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1209 kes Modify USTORE constructor to set an empty store_source string,
1210 and don't copy the store_source string in a cancel. Hopefully
1211 this will fix Arno's seg fault, bug #744.
1212 kes Add back code to disable conio in configure. Fixes bug #743.
1213 kes Correct the Options scanner in the FD to correctly handle
1214 SHA1 option, which was eating the next option. Reported by
1216 kes Add code to indicate when the SD is spooling, spool wait, and
1217 despooling as requested by Alan Brown.
1219 Version 2.0.0 released: 4 January 2007