8 Version 1.37 Kern (see below)
9 ========================================================
12 #3 Migration (Move, Copy, Archive Jobs)
13 #7 Single Job Writing to Multiple Storage Devices
16 ## Integrate web-bacula into a new Bacula project with
18 ## Consider moving docs to their own project.
19 ## Move rescue to its own project.
22 - 3. Prevent two drives requesting the same Volume in any given
23 autochanger, by checking if a Volume is mounted on another drive
25 - 7. Implement new Console commands to allow offlining/reserving drives,
26 and possibly manipulating the autochanger (much asked for).
27 - Make "update slots" when pointing to Autochanger, remove
28 all Volumes from other drives. "update slots all-drives"?
31 - Add disk seeking on restore; turn off seek on tapes.
33 - Implement "NewVolumeEachJob = yes|no" in Dir.
35 - Python script to save with Python, not save, save with Bacula.
36 - Python script to do backup.
37 - Create a new GUI chapter explaining all the GUI programs.
38 - Look at Preben's acl.c error handling code.
39 - Look at adding full Volume and Pool information to a Volume
40 label so that bscan can get *all* the info.
41 - Implement Maximum Job Spool Size
42 - Remove all old Device resource code in Dir and code to pass it
43 back in SD -- better, rework it to pass back device statistics.
44 - Finish implementation of passing all Storage and Device needs to
46 - Check locking of resources -- be sure to lock devices where previously
47 resources were locked.
48 - Add global lock on all devices when creating a device structure.
49 - Make sure that Python has access to Client address/port so that
50 it can check if Clients are alive.
51 - Cleanup and complete Python scripting.
53 - Change the Priority, Client, Storage, JobStatus (error)
54 at the start of a job.
57 - If the user puts "Purge Oldest Volume = yes" or "Recycle Oldest Volume = yes"
58 and there is only one volume in the pool, refuse to do it -- otherwise
59 he fills the Volume, then immediately starts reusing it.
60 - Implement copies and stripes.
61 - Add history file to console.
62 - Each file on tape creates a JobMedia record. Peter has 4 million
63 files spread over 10000 tape files and four tapes. A restore takes
64 16 hours to build the restore list.
65 - By the way: on page http://www.bacula.org/?page=tapedrives , at the
66 bottom, the link to "Tape Testing Chapter" is broken. It goes to
67 /html-manual/... while the others point to /rel-manual/...
69 1) ADIC, DLT, FastStor 4000, 7*20GB
70 2) Sun, DDS, (Suns name unknown - Archive Python DDS drive), 1.2GB
71 3) Wangtek, QIC, 6525ES, 525MB (fixed block size 1k, block size etc.
72 driver dependent - aic7xxx works, ncr53c8xx with problems)
73 4) HP, DDS-2, C1553A, 6*4GB
75 to activate, check or disable the hardware compression feature on my
76 exb-8900 i use the exabyte "MammothTool" you can get it here:
77 http://www.exabyte.com/support/online/downloads/index.cfm
78 There is a solaris version of this tool. With option -C 0 or 1 you can
79 disable or activate compression. Start this tool without any options for
81 - Linux Sony LIB-D81, AIT-3 library works.
82 - Device resource needs the "name" of the SD.
83 - Add and option to see if the file size changed during backup.
85 data-fd: RestoreFiles.2004-12-07_15.56.42 Error:
86 > ..\findlib\../../findlib/create_file.c:275 Could not open e:/: ERR=Der
87 > Prozess kann nicht auf die Datei zugreifen, da sie von einem anderen
88 > Prozess verwendet wird.
89 Restore restores all files, but then fails at the end trying
90 to set the attributes of e:
91 - Add better documentation on how restores can be done
93 - Resolve the problem between Device name and Archive name,
95 - Make sure SD deletes spool files on error exit.
96 - Delete old spool files when SD starts.
97 - Add a restore directory-x
98 - When labeling tapes, if you enter 000026, Bacula uses
99 the tape index rather than the Volume name 000026.
100 - Max Vols limit in Pool off by one?
101 - Tell the "restore" user when browsing is no longer possible.
102 - Require restore via the restore command or make a restore Job
103 get the bootstrap file.
104 - Make bootstrap file handle multiple MediaTypes (SD)
105 - Add offline tape command to Bacula console.
106 - Document that Bootstrap files can be written with cataloging
108 - Upgrade to MySQL 4.1.1 See:
109 http://dev.mysql.com/doc/mysql/en/Server_SQL_mode.html
110 - Add client version to the Client name line that prints in
113 Enter MediaId or Volume name: 32
114 Enter new Volume name: DLT-20Dec04
115 Automatically selected Pool: Default
116 Connecting to Storage daemon DLTDrive at 192.168.68.104:9103 ...
117 Sending relabel command from "DLT-28Jun03" to "DLT-20Dec04" ...
118 block.c:552 Write error at 0:0 on device /dev/nst0. ERR=Bad file descriptor.
119 Error writing final EOF to tape. This tape may not be readable.
120 dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
121 askdir.c:219 NULL Volume name. This shouldn't happen!!!
122 3912 Failed to label Volume: ERR=dev.c:1207 ioctl MTWEOF error on /dev/nst0. ERR=Permission denied.
124 Label command failed for Volume DLT-20Dec04.
125 Do not forget to mount the drive!!!
126 - Bug: if a job is manually scheduled to run later, it does not appear
127 in any status report and cannot be cancelled.
129 Regression tests (Scott):
130 - Add Pool/Storage override regression test.
131 - Add delete JobId to regression.
132 - Add a regression test for dbcheck.
133 - New test to add bscan to four-concurrent-jobs regression,
134 i.e. after the four-concurrent jobs zap the
135 database as is done in the bscan-test, then use bscan to
136 restore the database, do a restore and compare with the
138 - Add restore of specific JobId to regression (item 3
139 on the restore prompt)
140 - Add IPv6 to regression
141 - Add database test to regression. Test each function like delete,
144 - AntiVir can slow down backups on Win32 systems.
145 - Win32 systems with FAT32 can be much slower than NTFS for
146 more than 1000 files per directory.
150 - A HOLD command to stop all jobs from starting.
151 - A PAUSE command to pause all running jobs ==> release the
153 - Media Type = LTO,LTO-2,LTO-3
154 Media Type Read = LTO,LTO2,LTO3
155 Media Type Write = LTO2, LTO3
157 === From Carsten Menke <bootsy52@gmx.net>
159 Following is a list of what I think in the situations where I'm faced with,
160 could be a usefull enhancement to bacula, which I'm certain other users will
161 benefit from as well.
163 1. NextJob/NextJobs Directive within a Job Resource in the form of
164 NextJobs = job1,job2.
167 I currently solved the problem with running multiple jobs each after each
168 by setting the Max Wait Time for a job to 8 hours, and give
169 the jobs different Priorities. However, there scenarios where
170 1 Job is directly depending on another job, so if the former job fails,
171 the job after it needn't to be run
172 while maybe other jobs should run despite of that
175 A Backup Job and a Verify job, if the backup job fails there is no need to run
176 the verify job, as the backup job already failed. However, one may like
177 to backup the Catalog to disk despite of that the main backup job failed.
180 I see that this is related to the Event Handlers which are on the ToDo
181 list, also it is maybe a good idea to check for the return value and
182 execute different actions based on the return value
185 3. offline capability to bconsole
188 Currently I use a script which I execute within the last Job via the
189 RunAfterJob Directive, to release and eject the tape.
190 So I have to call bconsole "release=Storage-Name" and afterwards
191 mt -f /dev/nst0 eject to get the tape out.
193 If I have multiple Storage Devices, than these may not be /dev/nst0 and
194 I have to modify the script or call it with parameters etc.
195 This would actually not be needed, as everything is already defined
196 in bacula-sd.conf and if I can invoke bconsole with the
197 storage name via $1 in the script than I'm done and information is
200 4. %s for Storage Name added to the chars being substituted in "RunAfterJob"
204 For the reason mentioned in 3. to have the ability to call a
205 script with /scripts/foobar %s and in the script use $1
206 to pass the Storage Name to bconsole
208 5. Setting Volume State within a Job Resource
211 Instead of using "Maximum Volume Jobs" in the Pool Resource,
212 I would have the possibilty to define
213 in a Job Resource that after this certain job is run, the Volume State
214 should be set to "Volume State = Used", this give more flexibility (IMHO).
216 6. Localization of Bacula Messages
219 Unfortunatley many,many people I work with don't speak english very well.
220 So if at least the Reporting messages would be localized then they
221 would understand that they have to change the tape,etc. etc.
223 I volunteer to do the german translations, and if I can convince my wife also
224 french and Morre (western african language).
226 7. OK, this is evil, probably bound to security risks and maybe not possible
227 due to the design of bacula.
229 Implementation of Backtics ( `command` ) for shell comand execution to
230 the "Label Format" Directive.
234 Currently I have defined BACULA_DAY_OF_WEEK="day1|day2..." resulting in
235 Label Format = "HolyBackup-${BACULA_DAY_OF_WEEK[${WeekDay}]}". If I could
236 use backticks than I could use "Label Format = HolyBackup-`date +%A` to have
237 the localized name for the day of the week appended to the
238 format string. Then I have the tape labeled automatically with weekday
239 name in the correct language.
241 - Make output from status use html table tags for nicely
242 presenting in a browser.
243 - Can one write tapes faster with 8192 byte block sizes?
244 - Specify a single directory to restore.
245 - Document security problems with the same password for everyone in
246 rpm and Win32 releases.
247 - Browse generations of files.
248 - I've seen an error when my catalog's File table fills up. I
249 then have to recreate the File table with a larger maximum row
250 size. Relevant information is at
251 http://dev.mysql.com/doc/mysql/en/Full_table.html ; I think the
252 "Installing and Configuring MySQL" chapter should talk a bit
253 about this potential problem, and recommend a solution.
254 - For Solaris must use POSIX awk.
255 - Want speed of writing to tape while despooling.
256 - Supported autochanger:
264 Wangtek 6525ES (SCSI-1 QIC drive, 525MB), under Linux 2.4.something,
265 bacula 1.36.0/1 works with blocksize 16k INSIDE bacula-sd.conf.
266 - Add regex from http://www.pcre.org to Bacula for Win32.
267 - Use only shell tools no make in CDROM package.
268 - Document PostgreSQL performance problems bug 131.
270 - Document that ChangerDevice is used for Alert command.
271 - Include within include does it work?
272 - Implement a Pool of type Cleaning?
273 - Implement VolReadTime and VolWriteTime in SD
274 - Modify Backing up Your Database to include a bootstrap file.
275 - Think about making certain database errors fatal.
276 - Look at correcting the time jump in the scheduler for daylight
277 savings time changes.
278 - Add a "real" timer to network connections.
279 - Write non-optimized bsrs from the JobMedia and Media records,
280 even after Files are pruned.
281 - Promote to Full = Time period
282 - Despool attributes simultaneously with data in a separate
283 thread, rejoined at end of data spooling.
284 - Implement Files/Bytes,... stats for restore job.
285 - Implement Total Bytes Written, ... for restore job.
286 - Check dates entered by user for correctness (month/day/... ranges)
287 - Compress restore Volume listing by date and first file.
288 - Look at patches/bacula_db.b2z postgresql that loops during restore.
290 - Perhaps add read/write programs and/or plugins to FileSets.
291 - How to handle backing up portables ...
292 - Add some sort of guaranteed Interval for upgrading jobs.
293 - Can we write the state file after every job terminates? On Win32
294 the system crashes and the state file is not updated.
297 Documentation to do: (any release a little bit at a time)
298 - Doc to do unmount before removing magazine.
299 - Alternative to static linking "ldd prog" save all binaries listed,
300 restore them and point LD_LIBRARY_PATH to them.
301 - Document add "</dev/null >/dev/null 2>&1" to the bacula-fd command line
302 - Document query file format.
303 - Add more documentation for bsr files.
304 - Document problems with Verify and pruning.
305 - Document how to use multiple databases.
306 - VXA drives have a "cleaning required"
307 indicator, but Exabyte recommends preventive cleaning after every 75
310 In this context, it should be noted that Exabyte has a command-line
311 vxatool utility available for free download. (The current version is
312 vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
313 test the drive, unload tapes, change drive settings, flash new firmware,
315 Of particular interest in this context is that vxatool <device> -i will
316 report, among other details, the time since last cleaning in tape motion
317 minutes. This information can be retrieved (and settings changed, for
318 that matter) through the generic-SCSI device even when Bacula has the
319 regular tape device locked. (Needless to say, I don't recommend
320 changing tape settings while a job is running.)
321 - Lookup HP cleaning recommendations.
322 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
323 - Document doing table repair
326 Testing to do: (painful)
329 For 1.37 Testing/Documentation:
330 - Add bandwidth limiting.
331 - Add acks every once and a while from the SD to keep
332 the line from timing out.
333 - When an error in input occurs and conio beeps, you can back
334 up through the prompt.
335 - Detect fixed tape block mode during positioning by looking at
336 block numbers in btape "test". Possibly adjust in Bacula.
337 - Fix list volumes to output volume retention in some other
338 units, perhaps via a directive.
339 - If opening a tape in read/write mode fails attempt to open
340 it in read-only mode, and mark the tape for read only.
341 - Add a read-only mode to the mount option.
342 - Allow Simultaneous Priorities = yes => run up to Max concurrent jobs even
343 with multiple priorities.
344 - If you use restore replace=never, the directory attributes for
345 non-existent directories will not be restored properly.
347 - see lzma401.zip in others directory for new compression
349 - Minimal autochanger handling in Bacula and in btape.
350 - Look into how tar does not save sockets and the possiblity of
351 not saving them in Bacula (Martin Simmons reported this).
352 - Fix restore jobs so that multiple jobs can run if they
353 are not using the same tape(s).
354 - Allow the user to select JobType for manual pruning/purging.
355 - bscan does not put first of two volumes back with all info in
357 - Implement the FreeBSD nodump flag in chflags.
358 - Figure out how to make named console messages go only to that
359 console and to the non-restricted console (new console class?).
360 - Make restricted console prompt for password if *ask* is set or
361 perhaps if password is undefined.
362 - Implement "from ISO-date/time every x hours/days/weeks/months" in
367 MA = (last_MA * 3 + rate) / 4
368 rate = (bytes - last_bytes) / (runtime - last_runtime)
370 ==== from Marc Schoechlin
371 - the help-command should be more verbose
372 (it should explain the paramters of the different
374 -> it´s time-comsuming to consult the manual anytime
375 you need a special parameter
376 -> maybe it´s more easy to maintain this, if the
377 descriptions of that commands are outsourced to
379 - the cd-command should allow complete paths
380 i.e. cd /foo/bar/foo/bar
381 -> if a customer mails me the path to a certain file,
382 it´s faster to enter the specified directory
383 - if the password is not configured in bconsole.conf
384 you should be asked for it.
385 -> sometimes you like to do restore on a customer-machine
386 which shouldn´t know the password for bacula.
387 -> adding the password to the file favours admins
388 to forget to remove the password after usage
390 the protection of that file is less important
391 - long-listed-output of commands should be scrollable
392 like the unix more/less-command does
393 -> if someone runs 200 and more machines, the lists could
394 be a little long and complex
395 - command-output should be shown column by column
396 to reduce scrolling and to increase clarity
398 - lsmark should list the selected files with full
400 - wildcards for selecting and file and directories would be nice
401 - any actions should be interuptable with STRG+C
402 - command-expansion would be pretty cool
404 - When the replace Never option is set, new directory permissions
405 are not restored. See bug 213. To fix this requires creating a
406 list of newly restored directories so that those directory
407 permissions *can* be restored.
408 - Compaction of Disk space by "migrating" Volumes that have pruned
409 Jobs (what criteria? size, #jobs, time).
410 - Add prune all command
411 - Document fact that purge can destroy a part of a restore by purging
412 one volume while others remain valid -- perhaps mark Jobs.
413 - Add multiple-media-types.txt
414 - look at mxt-changer.html
415 - Make ? do a help command (no return needed).
416 - Implement restore directory.
417 - Document streams and how to implement them.
418 - Try not to re-backup a file if a new hard link is added.
419 - Add feature to backup hard links only, but not the data.
420 - Fix stream handling to be simpler.
421 - Add Priority and Bootstrap to Run a Job.
422 - Eliminate Restore "Run Restore Job" prompt by allowing new "run command
424 - Remove View FileSet button from Run a Job dialog.
425 - Handle prompt for restore job at end of Restore command.
426 - Add display of total selected files to Restore window.
427 - Add tree pane to left of window.
428 - Add progress meter.
429 - Max wait time or max run time causes seg fault -- see runtime-bug.txt
430 - Document writing to a CD/DVD with Bacula.
431 - Add a "base" package to the window installer for pthreadsVCE.dll
432 which is needed by all packages.
433 - Add message to user to check for fixed block size when the forward
434 space test fails in btape.
435 - When unmarking a directory check if all files below are unmarked and
436 then remove the + flag -- in the restore tree.
437 - Possibly implement: Action = Unmount Device="TapeDrive1" in Admin jobs.
438 - Setup lrrd graphs: (http://www.linpro.no/projects/lrrd/) Mike Acar.
439 - Revisit the question of multiple Volumes (disk) on a single device.
440 - Add a block copy option to bcopy.
441 - Investigate adding Mac Resource Forks.
442 - Finish work on Gnome restore GUI.
443 - Fix "llist jobid=xx" where no fileset or client exists.
445 it seems to be complaining about 12:00pm which should be a valid 12
446 hour time. I changed the time to 11:59am and everything works fine.
447 Also 12:00am works fine. 0:00pm also works (which I don't think
448 should). None of the values 12:00pm - 12:59pm work for that matter.
449 - Add level to estimate command.
450 - For each job type (Admin, Restore, ...) require only the really necessary
452 - Fix option 2 of restore -- list where file is backed up -- require Client,
453 then list last 20 backups.
454 - Pass Director resource name as an option to the Console.
455 - Add a "batch" mode to the Console (no unsolicited queries, ...).
456 - Add a .list all files in the restore tree (probably also a list all files)
457 Do both a long and short form.
458 - Allow browsing the catalog to see all versions of a file (with
459 stat data on each file).
460 - Restore attributes of directory if replace=never set but directory
462 - Use SHA1 on authentication if possible.
463 - See comtest-xxx.zip for Windows code to talk to USB.
464 - Add Events and Perl scripting.
465 - Add John's appended files:
466 Appended = { /files/server/logs/http/*log }
467 and such files would be treated as follows.On a FULL backup, they would
468 be backed up like any other file.On an INCREMENTAL backup, where a
469 previous INCREMENTAL or FULL was already in thecatalogue and the length
470 of the file wasgreater than the length of the last backup, only thedata
471 added since the last backup will be dumped.On an INCREMENTAL backup, if
472 the length of the file is less than thelength of the file with the same
473 name last backed up, the completefile is dumped.On Windows systems, with
474 creation date of files, we can be evensmarter about this and not count
475 entirely upon the length.On a restore, the full and all incrementals
476 since it will beapplied in sequence to restore the file.
477 - Allow for optional cancelling of SD and FD in case DIR
478 gets a fatal error. Requested by Jesse Guardiani <jesse@wingnet.net>
479 - Add "limit=n" for "list jobs"
480 - Check new HAVE_WIN32 open bits.
481 - Check if the tape has moved before writing.
482 - Handling removable disks -- see below:
483 - Keep track of tape use time, and report when cleaning is necessary.
484 - Add FromClient and ToClient keywords on restore command (or
485 BackupClient RestoreClient).
486 - Implement a JobSet, which groups any number of jobs. If the
487 JobSet is started, all the jobs are started together.
488 Allow Pool, Level, and Schedule overrides.
489 - Enhance cancel to timeout BSOCK packets after a specific delay.
490 - Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and
491 ua_status.!!! Thanks to Alan Brown for this tip.
492 - Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
493 correctly for multiple simultaneous jobs.
494 - Correct code so that FileSet MD5 is calculated for < and | filename
496 - Implement the Media record flag that indicates that the Volume does disk
498 - Implement VolAddr, which is used when Volume is addressed like a disk,
499 and form it from VolFile and VolBlock.
500 - Make multiple restore jobs for multiple media types specifying
501 the proper storage type.
502 - Implement MediaType keyword in bsr?
503 - Fix fast block rejection (stored/read_record.c:118). It passes a null
504 pointer (rec) to try_repositioning().
505 - Look at extracting Win data from BackupRead.
506 - Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
507 which would take precidence over the Catalog "JobRetention".
508 - Implement Label Format in Add and Label console commands.
509 - Possibly up network buffers to 65K. Put on variable.
510 - Put email tape request delays on one or more variables. User wants
511 to cancel the job after a certain time interval. Maximum Mount Wait?
512 - Job, Client, Device, Pool, or Volume?
513 Is it possible to make this a directive which is *optional* in multiple
514 resources, like Level? If so, I think I'd make it an optional directive
515 in Job, Client, and Pool, with precedence such that Job overrides Client
516 which in turn overrides Pool.
518 - New Storage specifications:
519 - Want to write to multiple storage devices simultaneously
520 - Want to write to multiple storage devices sequentially (in one job)
521 - Want to read/write simultaneously
522 - Key is MediaType -- it must match
524 Passed to SD as a sort of BSR record called Storage Specification
528 MediaType -> Next MediaType
530 Device -> Next Device
532 Allow multiple Storage specifications
540 Allow Multiple Pool specifications (note, Pool currently
542 Allow Multiple MediaType specifications in Dir conf
543 Allow Multiple Device specifications in Dir conf
544 Perhaps keep this in a single SSR
545 Tie a Volume to a specific device by using a MediaType that
546 is contained in only one device.
547 In SD allow Device to have Multiple MediaTypes
549 - Ideas from Jerry Scharf:
550 First let's point out some big pluses that bacula has for this
552 more importantly it's active. Thank you so much for that
553 even more important, it's not flaky
554 it has an open access catalog, opening many possibilities
555 it's pushing toward heterogeneous systems capability
557 Macintosh file client
558 macs are an interesting niche, but I fear a server is a rathole
559 working bare iron recovery for windows
560 the option for inc/diff backups not reset on fileset revision
561 a) use both change and inode update time against base time
562 b) do the full catalog check (expensive but accurate)
563 sizing guide (how much system is needed to back up N systems/files)
564 consultants on using bacula in building a disaster recovery system
566 or how to get at fancy things that one could do with bacula
567 logwatch code for bacula logs (or similar)
568 linux distro inclusion of bacula (brings good and bad, but necessary)
569 win2k/XP server capability (icky but you asked)
570 support for Oracle database ??
572 - Look at adding SQL server and Exchange support for Windows.
573 - Each DVD-RAM disk would be a volume, just like each tape is
574 a volume. It's a 4.7GB media with random access, but there's nothing about
575 it that I can see that makes it so different than a tape from bacula's
576 perspective. Why couldn't I back up to a bare floppy as a volume (ignoring
578 - Make dev->file and dev->block_num signed integers so that -1 can
579 be an invalid value which happens with BSR.
580 - Create VolAddr for disk files in place of VolFile and VolBlock. This
581 is needed to properly specify ranges.
582 - Add progress of files/bytes to SD and FD.
583 - Print warning message if FileId > 4 billion
584 - do a "messages" before the first prompt in Console
585 - Add a date and time stamp at the beginning of every line in the
586 Job report (Volker Sauer).
587 - Client does not show busy during Estimate command.
588 - Implement Console mtx commands.
589 - Implement a Mount Command and an Unmount Command where
590 the users could specify a system command to be performed
591 to do the mount, after which Bacula could attempt to
592 read the device. This is for Removeable media such as a CDROM.
593 - Most likely, this mount command would be invoked explicitly
594 by the user using the current Console "mount" and "unmount"
595 commands -- the Storage Daemon would do the right thing
596 depending on the exact nature of the device.
597 - As with tape drives, when Bacula wanted a new removable
598 disk mounted, it would unmount the old one, and send a message
599 to the user, who would then use "mount" as described above
600 once he had actually inserted the disk.
601 - Implement dump/print label to UA
602 - Spool to disk only when the tape is full, then when a tape is hung move
604 - bextract is sending everything to the log file ****FIXME****
605 - Allow multiple Storage specifications (or multiple names on
606 a single Storage specification) in the Job record. Thus a job
607 can be backed up to a number of storage devices.
608 - Implement some way for the File daemon to contact the Director
609 to start a job or pass its DHCP obtained IP number.
610 - Implement a query tape prompt/replace feature for a console
611 - Copy console @ code to gnome2-console
612 - Make AES the only encryption algorithm see
613 http://csrc.nist.gov/CryptoToolkit/aes/). It's
614 an officially adopted standard, has survived peer
615 review, and provides keys up to 256 bits.
616 - Take a careful look at SetACL http://setacl.sourceforge.net
617 - Take a careful look at Level for the estimate command, maybe make
618 it a command line option.
619 - Add Volume name to "I cannot write on this volume because"
620 - Make tree walk routines like cd, ls, ... more user friendly
621 by handling spaces better.
622 - Make sure that Bacula rechecks the tape after the 20 min wait.
623 - Set IO_NOWAIT on Bacula TCP/IP packets.
624 - Try doing a raw partition backup and restore by mounting a
627 Yes, it would allow to highly automatic the request for new tapes. If a
628 tape is empty, bacula reads the barcodes (native or simulated), and if
629 an unused tape is found, it runs the label command with all the
630 necessary parameters.
632 By the way can bacula automatically "move" an empty/purged volume say
633 in the "short" pool to the "long" pool if this pool runs out of volume
635 - What to do about "list files job=xxx".
636 - Make Dmsg look at global before calling subroutine.
637 - Get and test MySQL 4.0
638 - Look at how fuser works and /proc/PID/fd that is how Nic found the
639 file descriptor leak in Bacula.
640 - Implement WrapCounters in Counters.
641 - Add heartbeat from FD to SD if hb interval expires.
642 - Can we dynamically change FileSets?
643 - If pool specified to label command and Label Format is specified,
644 automatically generate the Volume name.
645 - Why can't SQL do the filename sort for restore?
646 - Look into Microsoft Volume Shadowcopy Service VSS for backing
647 up system state components (Active Directory, System Volume, ...)
648 - Add ExhautiveRestoreSearch
649 - Look at the possibility of loading only the necessary
650 data into the restore tree (i.e. do it one directory at a
651 time as the user walks through the tree).
652 - Possibly use the hash code if the user selects all for a restore command.
653 - Fix "restore all" to bypass building the tree.
654 - Prohibit backing up archive device (findlib/find_one.c:128)
655 - Implement Release Device in the Job resource to unmount a drive.
656 - Implement Acquire Device in the Job resource to mount a drive,
657 be sure this works with admin jobs so that the user can get
658 prompted to insert the correct tape. Possibly some way to say to
659 run the job but don't save the files.
660 - Make things like list where a file is saved case independent for
663 - Use autochanger to handle multiple devices.
664 - Add SuSE install doc to list.
665 - Check and rechedk "Invalid block number"
666 - User wants to NOT backup up certain big files (email files).
667 - Maybe remove multiple simultaneous devices code in SD.
668 - On Windows with very long path names, it may be impossible to create
669 a file (and thus restore it) because the total length is too long.
670 We must cd into the directory then create the file without the
672 - Implement a Recycle command
673 - Add client name to cram-md5 challenge so Director can immediately
674 verify if it is the correct client.
675 - Audit all UA commands to ensure that we always prompt where possible.
676 - Make bootstrap filename unique.
677 - Test a second language e.g. french.
678 - Start working on Base jobs.
679 - Implement UnsavedFiles DB record.
680 - Implement argc/argv for daemon command line scanning using table driven
682 - From Phil Stracchino:
683 It would probably be a per-client option, and would be called
684 something like, say, "Automatically purge obsoleted jobs". What it
685 would do is, when you successfully complete a Differential backup of a
686 client, it would automatically purge all Incremental backups for that
687 client that are rendered redundant by that Differential. Likewise,
688 when a Full backup on a client completed, it would automatically purge
689 all Differential and Incremental jobs obsoleted by that Full backup.
690 This would let people minimize the number of tapes they're keeping on
691 hand without having to master the art of retention times.
692 - Implement a M_SECURITY message class.
693 - When doing a Backup send all attributes back to the Director, who
694 would then figure out what files have been deleted.
695 - Currently in mount.c:236 the SD simply creates a Volume. It should have
696 explicit permission to do so. It should also mark the tape in error
697 if there is an error.
698 - SD Bytes Read is wrong.
699 - Investigate doing RAW backup of Win32 partition.
700 - Cancel waiting for Client connect in SD if FD goes away.
702 - Implement timeout in response() when it should come quickly.
703 - Implement console @echo command.
704 - Implement a Slot priority (loaded/not loaded).
705 - Implement "vacation" Incremental only saves.
706 - Implement single pane restore (much like the Gftp panes).
707 - Implement Automatic Mount even in operator wait.
708 - Implement create "FileSet"?
709 - Implement restore "current system", but take all files without
710 doing selection tree -- so that jobs without File records can
712 - Add prefixlinks to where or not where absolute links to FD.
713 - Issue message to mount a new tape before the rewind.
714 - Simplified client job initiation for portables.
715 - If SD cannot open a drive, make it periodically retry.
716 - Add more of the config info to the tape label.
718 - If tape is marked read-only, then try opening it read-only rather than
719 failing, and remember that it cannot be written.
720 - Refine SD waiting output:
721 Device is being positioned
722 > Device is being positioned for append
723 > Device is being positioned to file x
725 - Figure out some way to estimate output size and to avoid splitting
726 a backup across two Volumes -- this could be useful for writing CDROMs
727 where you really prefer not to have it split -- not serious.
728 - Have SD compute MD5 or SHA1 and compare to what FD computes.
729 - Make VolumeToCatalog calculate an MD5 or SHA1 from the
730 actual data on the Volume and compare it.
731 - Implement Bacula plugins -- design API
732 - Make bcopy read through bad tape records.
733 - Program files (i.e. execute a program to read/write files).
734 Pass read date of last backup, size of file last time.
735 - Add Signature type to File DB record.
736 - CD into subdirectory when open()ing files for backup to
737 speed up things. Test with testfind().
738 - Priority job to go to top of list.
739 - Why are save/restore of device different sizes (sparse?) Yup! Fix it.
740 - Implement some way for the Console to dynamically create a job.
741 - Restore to a particular time -- e.g. before date, after date.
742 - Solaris -I on tar for include list
743 - Need a verbose mode in restore, perhaps to bsr.
744 - bscan without -v is too quiet -- perhaps show jobs.
745 - Add code to reject whole blocks if not wanted on restore.
746 - Check if we can increase Bacula FD priorty in Win2000
747 - Make sure the MaxVolFiles is fully implemented in SD
748 - Check if both CatalogFiles and UseCatalog are set to SD.
749 - Figure out how to do a bare metal Windows restore
750 - Possibly add email to Watchdog if drive is unmounted too
751 long and a job is waiting on the drive.
752 - After unmount, if restore job started, ask to mount.
753 - Convert all %x substitution variables, which are hard to remember
754 and read to %(variable-name). Idea from TMDA.
755 - Remove NextId for SQLite. Optimize.
756 - Move all SQL statements into a single location.
757 - Add UA rc and history files.
758 - put termcap (used by console) in ./configure and
759 allow -with-termcap-dir.
760 - Fix Autoprune for Volumes to respect need for full save.
761 - Fix Win32 config file definition name on /install
762 - Compare tape to Client files (attributes, or attributes and data)
763 - Make all database Ids 64 bit.
764 - Write an applet for Linux.
765 - Allow console commands to detach or run in background.
766 - Fix status delay on storage daemon during rewind.
767 - Add SD message variables to control operator wait time
768 - Maximum Operator Wait
769 - Minimum Message Interval
770 - Maximum Message Interval
771 - Send Operator message when cannot read tape label.
772 - Verify level=Volume (scan only), level=Data (compare of data to file).
773 Verify level=Catalog, level=InitCatalog
775 - Add keyword search to show command in Console.
776 - Events : tape has more than xxx bytes.
777 - Complete code in Bacula Resources -- this will permit
778 reading a new config file at any time.
779 - Handle ctl-c in Console
780 - Implement script driven addition of File daemon to config files.
781 - Think about how to make Bacula work better with File (non-tape) archives.
782 - Write Unix emulator for Windows.
783 - Put memory utilization in Status output of each daemon
784 if full status requested or if some level of debug on.
785 - Make database type selectable by .conf files i.e. at runtime
786 - Set flag for uname -a. Add to Volume label.
787 - Restore files modified after date
788 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
789 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
790 - Timout a job or terminate if link goes down, or reopen link and query.
791 - Concept of precious tapes (cannot be reused).
792 - Make bcopy copy with a single tape drive.
793 - Permit changing ownership during restore.
796 > My suggestion: Add a feature on the systray menu-icon menu to request
797 > an immediate backup now. This would be useful for laptop users who may
798 > not be on the network when the regular scheduled backup is run.
800 > My wife's suggestion: Add a setting to the win32 client to allow it to
801 > shut down the machine after backup is complete (after, of course,
802 > displaying a "System will shut down in one minute, click here to cancel"
803 > warning dialog). This would be useful for sites that want user
804 > woorkstations to be shut down overnight to save power.
807 - Autolabel should be specified by DIR instead of SD.
810 - AutoScan (check checksum of tape)
811 - Format command = "format /dev/nst0"
815 - Seek resolution (usually corresponds to buffer size)
816 - EODErrorCode=ENOSPC or code
817 - Partial Read error code
818 - Partial write error code
819 - Nonformatted read error
820 - Nonformatted write error
821 - WriteProtected error
825 - IgnoreCloseErrors=yes
835 - FD sends unsaved file list to Director at end of job (see
837 - File daemon should build list of files skipped, and then
838 at end of save retry and report any errors.
839 - Write a Storage daemon that uses pipes and
840 standard Unix programs to write to the tape.
842 - Need something that monitors the JCR queue and
843 times out jobs by asking the deamons where they are.
844 - Enhance Jmsg code to permit buffering and saving to disk.
845 - device driver = "xxxx" for drives.
847 - Ensure that /dev/null works
848 - Need report class for messages. Perhaps
849 report resource where report=group of messages
850 - enhance scan_attrib and rename scan_jobtype, and
851 fill in code for "since" option
852 - Director needs a time after which the report status is sent
853 anyway -- or better yet, a retry time for the job.
854 - Don't reschedule a job if previous incarnation is still running.
855 - Some way to automatically backup everything is needed????
856 - Need a structure for pending actions:
858 - termination status (part of buffered msgs?)
860 Read, Write, Clean, Delete
861 - Login to Bacula; Bacula users with different permissions:
862 owner, group, user, quotas
863 - Store info on each file system type (probably in the job header on tape.
864 This could be the output of df; or perhaps some sort of /etc/mtab record.
866 ========= ideas ===============
867 From: "Jerry K. Schieffer" <jerry@skylinetechnology.com>
868 To: <kern@sibbald.com>
869 Subject: RE: [Bacula-users] future large programming jobs
870 Date: Thu, 26 Feb 2004 11:34:54 -0600
872 I noticed the subject thread and thought I would offer the following
873 merely as sources of ideas, i.e. something to think about, not even as
874 strong as a request. In my former life (before retiring) I often
875 dealt with backups and storage management issues/products as a
876 developer and as a consultant. I am currently migrating my personal
877 network from amanda to bacula specifically because of the ability to
878 cross media boundaries during storing backups.
879 Are you familiar with the commercial product called ADSM (I think IBM
880 now sells it under the Tivoli label)? It has a couple of interesting
881 ideas that may apply to the following topics.
883 1. Migration: Consider that when you need to restore a system, there
884 may be pressure to hurry. If all the information for a single client
885 can eventually end up on the same media (and in chronological order),
886 the restore is facillitated by not having to search past information
887 from other clients. ADSM has the concept of "client affinity" that
888 may be associated with it's storage pools. It seems to me that this
889 concept (as an optional feature) might fit in your architecture for
892 ADSM also has the concept of defining one or more storage pools as
893 "copy pools" (almost mirrors, but only in the sense of contents).
894 These pools provide the ability to have duplicte data stored both
895 onsite and offsite. The copy process can be scheduled to be handled
896 by their storage manager during periods when there is no backup
897 activity. Again, the migration process might be a place to consider
898 implementing something like this.
901 > It strikes me that it would be very nice to be able to do things
903 > have the Job(s) backing up the machines run, and once they have all
904 > completed, start a migration job to copy the data from disks Volumes
906 > a tape library and then to offsite storage. Maybe this can already
908 > done with some careful scheduling and Job prioritzation; the events
909 > mechanism described below would probably make it very easy.
911 This is the goal. In the first step (before events), you simply
913 the Migration to tape later.
915 2. Base jobs: In ADSM, each copy of each stored file is tracked in
916 the database. Once a file (unique by path and metadata such as dates,
917 size, ownership, etc.) is in a copy pool, no more copies are made. In
918 other words, when you start ADSM, it begins like your concept of a
919 base job. After that it is in the "incremental" mode. You can
920 configure the number of "generations" of files to be retained, plus a
921 retention date after which even old generations are purged. The
922 database tracks the contents of media and projects the percentage of
923 each volume that is valid. When the valid content of a volume drops
924 below a configured percentage, the valid data are migrated to another
925 volume and the old volume is marked as empty. Note, this requires
926 ADSM to have an idea of the contents of a client, i.e. marking the
927 database when an existing file was deleted, but this would solve your
928 issue of restoring a client without restoring deleted files.
930 This is pretty far from what bacula now does, but if you are going to
931 rip things up for Base jobs,.....
932 Also, the benefits of this are huge for very large shops, especially
933 with media robots, but are a pain for shops with manual media
937 > Base jobs sound pretty useful, but I'm not dying for them.
939 Nobody is dying for them, but when you see what it does, you will die
942 3. Restoring deleted files: Since I think my comments in (2) above
943 have low probability of implementation, I'll also suggest that you
944 could approach the issue of deleted files by a mechanism of having the
945 fd report to the dir, a list of all files on the client for every
946 backup job. The dir could note in the database entry for each file
947 the date that the file was seen. Then if a restore as of date X takes
948 place, only files that exist from before X until after X would be
949 restored. Probably the major cost here is the extra date container in
950 each row of the files table.
952 Thanks for "listening". I hope some of this helps. If you want to
953 contact me, please send me an email - I read some but not all of the
954 mailing list traffic and might miss a reply there.
956 Please accept my compliments for bacula. It is doing a great job for
957 me!! I sympathize with you in the need to wrestle with excelence in
958 execution vs. excelence in feature inclusion.
963 ==============================
966 - Design at hierarchial storage for Bacula. Migration and Clone.
967 - Implement FSM (File System Modules).
968 - Audit M_ error codes to ensure they are correct and consistent.
969 - Add variable break characters to lex analyzer.
970 Either a bit mask or a string of chars so that
971 the caller can change the break characters.
972 - Make a single T_BREAK to replace T_COMMA, etc.
973 - Ensure that File daemon and Storage daemon can
974 continue a save if the Director goes down (this
975 is NOT currently the case). Must detect socket error,
976 buffer messages for later.
977 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
978 - Add ability to backup to two Storage devices (two SD sessions) at
979 the same time -- e.g. onsite, offsite.
980 - Add the ability to consolidate old backup sets (basically do a restore
981 to tape and appropriately update the catalog). Compress Volume sets.
982 Might need to spool via file is only one drive is available.
983 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
984 someway to do so with every volume that has less than x% valid
988 Migration: Move a backup from one Volume to another
989 Clone: Copy a backup -- two Volumes
991 Bacula Migration is based on Jobs (apparently Networker is file by file).
993 Migration triggered by:
997 Highwater mark (keep total size)
1002 ======================================================
1004 It is somewhat like a Full save becomes an incremental since
1005 the Base job (or jobs) plus other non-base files.
1007 - A Base backup is same as Full backup, just different type.
1008 - New BaseFiles table that contains:
1010 BaseJobId - Base JobId referenced for this FileId (needed ???)
1011 JobId - JobId currently running
1012 FileId - File not backed up, exists in Base Job
1013 FileIndex - FileIndex from Base Job.
1014 i.e. for each base file that exists but is not saved because
1015 it has not changed, the File daemon sends the JobId, BaseId,
1016 FileId, FileIndex back to the Director who creates the DB entry.
1017 - To initiate a Base save, the Director sends the FD
1018 the FileId, and full filename for each file in the Base.
1019 - When the FD finds a Base file, he requests the Director to
1020 send him the full File entry (stat packet plus MD5), or
1021 conversely, the FD sends it to the Director and the Director
1022 says yes or no. This can be quite rapid if the FileId is kept
1023 by the FD for each Base Filename.
1024 - It is probably better to have the comparison done by the FD
1025 despite the fact that the File entry must be sent across the
1027 - An alternative would be to send the FD the whole File entry
1028 from the start. The disadvantage is that it requires a lot of
1029 space. The advantage is that it requires less communications
1031 - The Job record must be updated to indicate that one or more
1033 - At end of Job, FD returns:
1034 1. Count of base files/bytes not written to tape (i.e. matches)
1035 2. Count of base file that were saved i.e. had changed.
1036 - No tape record would be written for a Base file that matches, in the
1037 same way that no tape record is written for Incremental jobs where
1038 the file is not saved because it is unchanged.
1039 - On a restore, all the Base file records must explicitly be
1040 found from the BaseFile tape. I.e. for each Full save that is marked
1041 to have one or more Base Jobs, search the BaseFile for all occurrences
1043 - An optimization might be to make the BaseFile have:
1049 This would avoid the need to explicitly fetch each File record for
1050 the Base job. The Base Job record will be fetched to get the
1051 VolSessionId and VolSessionTime.
1052 =========================================================
1055 ==========================================================
1057 For each Incremental job that is run, there may be files that
1058 were found but not saved because they were locked (this applies
1059 only to Windows). Such a system could send back to the Director
1060 a list of Unsaved files.
1062 - New UnSavedFiles table that contains:
1066 - Then in the next Incremental job, the list of Unsaved Files will be
1067 feed to the FD, who will ensure that they are explicitly chosen even
1068 if standard date/time check would not have selected them.
1069 =============================================================
1072 Done: (see kernsdone for more)
1075 - John's Full save failed with 1.32c FD and 1.31 Dir no FD status,
1076 and no error message.
1077 - Add fd and st as Console keywords.
1078 - Recycling volume with a Slot requires an operator intervention:
1079 rufus-dir: Start Backup JobId 18, Job=kernsave.2003-11-01_21.23.52
1080 rufus-dir: Pruned 1 Job on Volume Vol01 from catalog.
1081 rufus-dir: There are no Jobs associated with Volume Vol01. Marking it purged.
1082 rufus-dir: Recycled volume "Vol01"
1083 rufus-sd: Please mount Volume "Vol01" on Storage Device "DDS-4" for Job kernsave.2003-11-01_21.23.52
1084 Use "mount" command to release Job.
1085 - Implement Dan's bacula script (email of 26 Oct).
1086 - Add JobName= to VerifyToCatalog so that all verifies can be done at the end.
1087 - Edit the Client/Storage name into authentication failure messages.
1088 - Fix packet too big problem. This is most likely a Windows TCP stack
1090 - Implement ClientRunBeforeJob and ClientRunAfterJob.
1091 - Implement forward spacing block/file: position_device(bsr) --
1092 just before read_block_from_device();
1095 Multiple drive autochanger data: see Alan Brown
1096 mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
1097 Unloading Data Transfer Element into Storage Element 1...source Element
1098 Address 480 is Empty
1100 (drive 0 was empty and so was slot 1)
1101 > mtx -f xxx load 15 0
1102 no response, just returns to the command prompt when complete.
1103 > mtx -f xxx status Storage Changer /dev/changer:2 Drives, 60 Slots ( 2 Import/Export )
1104 Data Transfer Element 0:Full (Storage Element 15 Loaded):VolumeTag = HX001
1105 Data Transfer Element 1:Empty
1106 Storage Element 1:Empty
1107 Storage Element 2:Full :VolumeTag=HX002
1108 Storage Element 3:Full :VolumeTag=HX003
1109 Storage Element 4:Full :VolumeTag=HX004
1110 Storage Element 5:Full :VolumeTag=HX005
1111 Storage Element 6:Full :VolumeTag=HX006
1112 Storage Element 7:Full :VolumeTag=HX007
1113 Storage Element 8:Full :VolumeTag=HX008
1114 Storage Element 9:Full :VolumeTag=HX009
1115 Storage Element 10:Full :VolumeTag=HX010
1116 Storage Element 11:Empty
1117 Storage Element 12:Empty
1118 Storage Element 13:Empty
1119 Storage Element 14:Empty
1120 Storage Element 15:Empty
1121 Storage Element 16:Empty....
1122 Storage Element 28:Empty
1123 Storage Element 29:Full :VolumeTag=CLNU01L1
1124 Storage Element 30:Empty....
1125 Storage Element 57:Empty
1126 Storage Element 58:Full :VolumeTag=NEX261L2
1127 Storage Element 59 IMPORT/EXPORT:Empty
1128 Storage Element 60 IMPORT/EXPORT:Empty
1130 Unloading Data Transfer Element into Storage Element 15...done
1132 (just to verify it remembers where it came from, however it can be
1133 overrriden with mtx unload {slotnumber} to go to any storage slot.)
1135 There needs to be a table of drive # to devices somewhere - If there are
1136 multiple changers or drives there may not be a 1:1 correspondance between
1137 changer drive number and system device name - and depending on the way the
1138 drives are hooked up to scsi busses, they may not be linearly numbered
1139 from an offset point either.something like
1141 Autochanger drives = 2
1142 Autochanger drive 0 = /dev/nst1
1143 Autochanger drive 1 = /dev/nst2
1144 IMHO, it would be _safest_ to use explicit mtx unload commands at all
1145 times, not just for multidrive changers. For a 1 drive changer, that's
1151 MTX's manpage (1.2.15):
1152 unload [<slotnum>] [ <drivenum> ]
1153 Unloads media from drive <drivenum> into slot
1154 <slotnum>. If <drivenum> is omitted, defaults to
1155 drive 0 (as do all commands). If <slotnum> is
1156 omitted, defaults to the slot that the drive was
1157 loaded from. Note that there's currently no way
1158 to say 'unload drive 1's media to the slot it
1159 came from', other than to explicitly use that
1160 slot number as the destination.AB
1166 undef# camcontrol devlist
1167 <WANGTEK 51000 SCSI M74H 12B3> at scbus0 target 2 lun 0 (pass0,sa0)
1168 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 0 (pass1,sa1)
1169 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 1 (pass2)
1171 tapeinfo -f /dev/sg0 with a bad tape in drive 1:
1172 [kern@rufus mtx-1.2.17kes]$ ./tapeinfo -f /dev/sg0
1173 Product Type: Tape Drive
1175 Product ID: 'C5713A '
1177 Attached Changer: No
1178 TapeAlert[3]: Hard Error: Uncorrectable read/write error.
1179 TapeAlert[20]: Clean Now: The tape drive neads cleaning NOW.
1186 Medium Type: Not Loaded
1189 DataCompEnabled: yes
1190 DataCompCapable: yes
1191 DataDeCompEnabled: yes
1198 Handling removable disks
1200 From: Karl Cunningham <karlc@keckec.com>
1202 My backups are only to hard disk these days, in removable bays. This is my
1203 idea of how a backup to hard disk would work more smoothly. Some of these
1204 things Bacula does already, but I mention them for completeness. If others
1205 have better ways to do this, I'd like to hear about it.
1207 1. Accommodate several disks, rotated similar to how tapes are. Identified
1208 by partition volume ID or perhaps by the name of a subdirectory.
1209 2. Abort & notify the admin if the wrong disk is in the bay.
1210 3. Write backups to different subdirectories for each machine to be backed
1212 4. Volumes (files) get created as needed in the proper subdirectory, one
1214 5. When a disk is recycled, remove or zero all old backup files. This is
1215 important as the disk being recycled may be close to full. This may be
1216 better done manually since the backup files for many machines may be
1217 scattered in many subdirectories.
1222 - Save mount point for directories not traversed with onefs=yes.
1223 - Add seconds to start and end times in the Job report output.
1224 - if 2 concurrent backups are attempted on the same tape
1225 drive (autoloader) into different tape pools, one of them will exit
1226 fatally instead of halting until the drive is idle
1227 - Update StartTime if job held in Job Queue.
1228 - Look at www.nu2.nu/pebuilder as a helper for full windows
1229 bare metal restore. (done by Scott)
1230 - Fix orphanned buffers:
1231 Orphaned buffer: 24 bytes allocated at line 808 of rufus-dir job.c
1232 Orphaned buffer: 40 bytes allocated at line 45 of rufus-dir alist.c
1233 - Implement Preben's suggestion to add
1234 File System Types = ext2, ext3
1235 to FileSets, thus simplifying backup of *all* local partitions.
1236 - Try to open a device on each Job if it was not opened
1237 when the SD started.
1238 - Add dump of VolSessionId/Time and FileIndex with bls.
1239 - If Bacula does not find the right tape in the Autochanger,
1240 then mark the tape in error and move on rather than asking
1241 for operator intervention.
1242 - Cancel command should include JobId in list of Jobs.
1243 - Add performance testing hooks
1244 - Bootstrap from JobMedia records.
1245 - Implement WildFile and WildDir to solve problem of
1246 saving only *.doc files.
1248 Please use the "label" command to create a new Volume for:
1249 Storage: DDS-4-changer
1253 The defined Storage resources are:
1254 - Copy Changer Device and Changer Command from Autochanger
1255 to Device resource in SD if none given in Device resource.
1256 - 1. Automatic use of more than one drive in an autochanger (done)
1257 - 2. Automatic selection of the correct drive for each Job (i.e.
1258 selects a drive with an appropriate Volume for the Job) (done)
1259 - 6. Allow multiple simultaneous Jobs referencing the same pool write
1260 to several tapes (some new directive(s) are are probably needed for
1263 - Key on Storage rather than Pool (done)
1264 - Allow multiple drives to use same Pool (change jobq.c DIR) (done).
1265 - Synchronize multiple drives so that not more
1266 than one loads a tape and any time (done)
1267 - 4. Use Changer Device and Changer Command specified in the
1268 Autochanger resource, if none is found in the Device resource.
1269 You can continue to specify them in the Device resource if you want
1270 or need them to be different for each device.
1271 - 5. Implement a new Device directive (perhaps "Autoselect = yes/no")
1272 that can allow a Device be part of an Autochanger, and hence the changer
1273 script protected, but if set to no, will prevent the Device from being
1274 automatically selected from the changer. This allows the device to
1275 be directly accessed through its Device name, but not through the
1277 #6 Select one from among Multiple Storage Devices for Job
1278 #5 Events that call a Python program
1279 (Implemented in Dir/SD)
1280 - Make sure the Device name is in the Query packet returned.
1281 - Don't start a second file job if one is already running.
1282 - Implement EOF/EOV labels for ANSI labels
1283 - Implement IBM labels.
1284 - When Python creates a new label, the tape is immediately
1285 recycled and no label created. This happens when using
1286 autolabeling -- even when Python doesn't generate the name.
1287 - Scratch Pool where the volumes can be re-assigned to any Pool.
1288 - 28-Mar 23:19 rufus-sd: acquire.c:379 Device "DDS-4" (/dev/nst0)
1289 is busy reading. Job 6 canceled.
1290 - Remove separate thread for opening devices in SD. On the other
1291 hand, don't block waiting for open() for devices.
1292 - Fix code to either handle updating NumVol or to calculate it in
1294 - Ensure that you cannot exclude a directory or a file explicitly
1296 #4 Embedded Python Scripting
1297 (Implemented in Dir/SD/FD)
1298 - Add Python writable variable for changing the Priority,
1299 Client, Storage, JobStatus (error), ...