8 Data encryption Meno Abels (see projects)
9 Communication encryption Meno Abels
10 Version 1.37 Kern (see below)
11 ========================================================
14 - Fix orphanned buffers:
15 Orphaned buffer: 24 bytes allocated at line 808 of rufus-dir job.c
16 Orphaned buffer: 40 bytes allocated at line 45 of rufus-dir alist.c
17 - Add dump of VolSessionId/Time and FileIndex with bls.
20 #3 Migration (Move, Copy, Archive Jobs)
21 #4 Embedded Python Scripting
22 #5 Events that call a Python program
23 #6 Select one from among Multiple Storage Devices for Job
24 #7 Single Job Writing to Multiple Storage Devices
28 - if 2 concurrent backups are attempted on the same tape
29 drive (autoloader) into different tape pools, one of them will exit
30 fatally instead of halting until the drive is idle
31 - Add seconds to start and end times in the Job report output.
32 - Add disk seeking on restore.
33 - Document that ChangerDevice is used for Alert command.
34 - Include within include does it work?
35 - Implement a Pool of type Cleaning?
36 - Implement VolReadTime and VolWriteTime in SD
37 - Modify Backing up Your Database to include a bootstrap file.
38 - Add restore of specific JobId to regression.
39 - Think about making certain database errors fatal.
40 - Look at correcting the time jump in the sceduler for daylight
42 - Add a "real" timer to network connections.
43 - Tell the "restore" user when browsing is no longer possible.
44 - Write non-optimized bsrs from the JobMedia and Media records,
45 even after Files are pruned.
46 - Document that Bootstrap files can be written with cataloging
48 - Look at adding full Volume and Pool information to a Volume
49 label so that bscan can get *all* the info.
50 - Promote to Full = Time period
51 - Scratch Pool where the volumes can be re-assigned to any Pool.
52 - Update StartTime if job held in Job Queue.
53 - Despool attributes simultaneously with data in a separate
54 thread, rejoined at end of data spooling.
55 - Implement Files/Bytes,... stats for restore job.
56 - Implement Total Bytes Written, ... for restore job.
57 - Check dates entered by user for correctness (month/day/... ranges)
58 - Compress restore Volume listing by date and first file.
59 - Add Pool/Storage override regression test.
60 - Add delete JobId to regression.
61 - Add bscan to four-concurrent-jobs regression.
62 - Look at patches/bacula_db.b2z postgresql that loops during restore.
64 - Add IPv6 to regression
65 - Perhaps add read/write programs and/or plugins to FileSets.
66 - How to handle backing up portables ...
67 - Add some sort of guaranteed Interval for upgrading jobs.
68 - Can we write the state file after every job terminates? On Win32
69 the system crashes and the state file is not updated.
72 Documentation to do: (any release a little bit at a time)
73 - Doc to do unmount before removing magazine.
74 - Alternative to static linking "ldd prog" save all binaries listed,
75 restore them and point LD_LIBRARY_PATH to them.
76 - Document add "</dev/null >/dev/null 2>&1" to the bacula-fd command line
77 - Document query file format.
78 - Add more documentation for bsr files.
79 - Document problems with Verify and pruning.
80 - Document how to use multiple databases.
81 - VXA drives have a "cleaning required"
82 indicator, but Exabyte recommends preventive cleaning after every 75
85 In this context, it should be noted that Exabyte has a command-line
86 vxatool utility available for free download. (The current version is
87 vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
88 test the drive, unload tapes, change drive settings, flash new firmware,
90 Of particular interest in this context is that vxatool <device> -i will
91 report, among other details, the time since last cleaning in tape motion
92 minutes. This information can be retrieved (and settings changed, for
93 that matter) through the generic-SCSI device even when Bacula has the
94 regular tape device locked. (Needless to say, I don't recommend
95 changing tape settings while a job is running.)
96 - Lookup HP cleaning recommendations.
97 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
98 - Document doing table repair
101 Testing to do: (painful)
104 For 1.37 Testing/Documentation:
105 - Add bandwidth limiting.
106 - Add acks every once and a while from the SD to keep
107 the line from timing out.
108 - When an error in input occurs and conio beeps, you can back
109 up through the prompt.
110 - Detect fixed tape block mode during positioning by looking at
111 block numbers in btape "test". Possibly adjust in Bacula.
112 - Fix list volumes to output volume retention in some other
113 units, perhaps via a directive.
114 - If opening a tape in read/write mode fails attempt to open
115 it in read-only mode, and mark the tape for read only.
116 - Add a read-only mode to the mount option.
117 - Allow Simultaneous Priorities = yes => run up to Max concurrent jobs even
118 with multiple priorities.
119 - Add db check test to regression. Test each function like delete,
121 - If you use restore replace=never, the directory attributes for
122 non-existent directories will not be restored properly.
124 - see lzma401.zip in others directory for new compression
126 - Minimal autochanger handling in Bacula and in btape.
127 - Look into how tar does not save sockets and the possiblity of
128 not saving them in Bacula (Martin Simmons reported this).
129 - Add All Local Partitions = yes to new style saves.
130 - localmounts=`awk '/ext/ { print $2 }' /proc/mounts` # or whatever
131 find $localmounts -xdev -type s -ls
132 - Fix restore jobs so that multiple jobs can run if they
133 are not using the same tape(s).
134 - Allow the user to select JobType for manual pruning/purging.
135 - Look at adding Client run command that will use the
136 port opened by the client.
137 - bscan does not put first of two volumes back with all info in
139 - Implement the FreeBSD nodump flag in chflags.
140 - Figure out how to make named console messages go only to that
141 console and to the non-restricted console (new console class?).
142 - Make restricted console prompt for password if *ask* is set or
143 perhaps if password is undefined.
144 - Implement "from ISO-date/time every x hours/days/weeks/months" in
146 ==== from Marc Schoechlin
147 - the help-command should be more verbose
148 (it should explain the paramters of the different
150 -> it´s time-comsuming to consult the manual anytime
151 you need a special parameter
152 -> maybe it´s more easy to maintain this, if the
153 descriptions of that commands are outsourced to
155 - the cd-command should allow complete paths
156 i.e. cd /foo/bar/foo/bar
157 -> if a customer mails me the path to a certain file,
158 it´s faster to enter the specified directory
159 - if the password is not configured in bconsole.conf
160 you should be asked for it.
161 -> sometimes you like to do restore on a customer-machine
162 which shouldn´t know the password for bacula.
163 -> adding the password to the file favours admins
164 to forget to remove the password after usage
166 the protection of that file is less important
167 - long-listed-output of commands should be scrollable
168 like the unix more/less-command does
169 -> if someone runs 200 and more machines, the lists could
170 be a little long and complex
171 - command-output should be shown column by column
172 to reduce scrolling and to increase clarity
174 - lsmark should list the selected files with full
176 - wildcards for selecting and file and directories would be nice
177 - any actions should be interuptable with STRG+C
178 - command-expansion would be pretty cool
180 - Compaction of Disk space by "migrating" Volumes that have pruned
181 Jobs (what criteria? size, #jobs, time).
182 - Add prune all command
183 - Document fact that purge can destroy a part of a restore by purging
184 one volume while others remain valid -- perhaps mark Jobs.
185 - Add multiple-media-types.txt
186 - look at mxt-changer.html
187 - Make ? do a help command (no return needed).
188 - Implement restore directory.
189 - Document streams and how to implement them.
190 - Try not to re-backup a file if a new hard link is added.
191 - Add feature to backup hard links only, but not the data.
192 - Fix stream handling to be simpler.
193 - Add Priority and Bootstrap to Run a Job.
194 - Eliminate Restore "Run Restore Job" prompt by allowing new "run command
196 - Remove View FileSet button from Run a Job dialog.
197 - Handle prompt for restore job at end of Restore command.
198 - Add display of total selected files to Restore window.
199 - Add tree pane to left of window.
200 - Add progress meter.
201 - Max wait time or max run time causes seg fault -- see runtime-bug.txt
202 - Document writing to a CD/DVD with Bacula.
203 - Add a "base" package to the window installer for pthreadsVCE.dll
204 which is needed by all packages.
205 - Add message to user to check for fixed block size when the forward
206 space test fails in btape.
207 - When unmarking a directory check if all files below are unmarked and
208 then remove the + flag -- in the restore tree.
209 - Possibly implement: Action = Unmount Device="TapeDrive1" in Admin jobs.
210 - Setup lrrd graphs: (http://www.linpro.no/projects/lrrd/) Mike Acar.
211 - Revisit the question of multiple Volumes (disk) on a single device.
212 - Add a block copy option to bcopy.
213 - Investigate adding Mac Resource Forks.
214 - Finish work on Gnome restore GUI.
215 - Fix "llist jobid=xx" where no fileset or client exists.
217 it seems to be complaining about 12:00pm which should be a valid 12
218 hour time. I changed the time to 11:59am and everything works fine.
219 Also 12:00am works fine. 0:00pm also works (which I don't think
220 should). None of the values 12:00pm - 12:59pm work for that matter.
221 - Add level to estimate command.
222 - For each job type (Admin, Restore, ...) require only the really necessary
224 - Fix option 2 of restore -- list where file is backed up -- require Client,
225 then list last 20 backups.
226 - Pass Director resource name as an option to the Console.
227 - Add a "batch" mode to the Console (no unsolicited queries, ...).
228 - Add a .list all files in the restore tree (probably also a list all files)
229 Do both a long and short form.
230 - Allow browsing the catalog to see all versions of a file (with
231 stat data on each file).
232 - Restore attributes of directory if replace=never set but directory
234 - Use SHA1 on authentication if possible.
235 - See comtest-xxx.zip for Windows code to talk to USB.
236 - Add Events and Perl scripting.
237 - Add John's appended files:
238 Appended = { /files/server/logs/http/*log }
239 and such files would be treated as follows.On a FULL backup, they would
240 be backed up like any other file.On an INCREMENTAL backup, where a
241 previous INCREMENTAL or FULL was already in thecatalogue and the length
242 of the file wasgreater than the length of the last backup, only thedata
243 added since the last backup will be dumped.On an INCREMENTAL backup, if
244 the length of the file is less than thelength of the file with the same
245 name last backed up, the completefile is dumped.On Windows systems, with
246 creation date of files, we can be evensmarter about this and not count
247 entirely upon the length.On a restore, the full and all incrementals
248 since it will beapplied in sequence to restore the file.
249 - Add a regression test for dbcheck.
250 - Allow for optional cancelling of SD and FD in case DIR
251 gets a fatal error. Requested by Jesse Guardiani <jesse@wingnet.net>
252 - Add "limit=n" for "list jobs"
253 - Check new HAVE_WIN32 open bits.
254 - Check if the tape has moved before writing.
255 - Handling removable disks -- see below:
256 - Keep track of tape use time, and report when cleaning is necessary.
257 - Add FromClient and ToClient keywords on restore command (or
258 BackupClient RestoreClient).
259 - Implement a JobSet, which groups any number of jobs. If the
260 JobSet is started, all the jobs are started together.
261 Allow Pool, Level, and Schedule overrides.
262 - Enhance cancel to timeout BSOCK packets after a specific delay.
263 - Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and
264 ua_status.!!! Thanks to Alan Brown for this tip.
265 - Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
266 correctly for multiple simultaneous jobs.
267 - Correct code so that FileSet MD5 is calculated for < and | filename
269 - Implement the Media record flag that indicates that the Volume does disk
271 - Implement VolAddr, which is used when Volume is addressed like a disk,
272 and form it from VolFile and VolBlock.
273 - Make multiple restore jobs for multiple media types specifying
274 the proper storage type.
275 - Implement MediaType keyword in bsr?
276 - Fix fast block rejection (stored/read_record.c:118). It passes a null
277 pointer (rec) to try_repositioning().
278 - Look at extracting Win data from BackupRead.
279 - Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
280 which would take precidence over the Catalog "JobRetention".
281 - Implement Label Format in Add and Label console commands.
282 - Possibly up network buffers to 65K. Put on variable.
283 - Put email tape request delays on one or more variables. User wants
284 to cancel the job after a certain time interval. Maximum Mount Wait?
285 - Job, Client, Device, Pool, or Volume?
286 Is it possible to make this a directive which is *optional* in multiple
287 resources, like Level? If so, I think I'd make it an optional directive
288 in Job, Client, and Pool, with precedence such that Job overrides Client
289 which in turn overrides Pool.
291 - New Storage specifications:
292 - Want to write to multiple storage devices simultaneously
293 - Want to write to multiple storage devices sequentially (in one job)
294 - Want to read/write simultaneously
295 - Key is MediaType -- it must match
297 Passed to SD as a sort of BSR record called Storage Specification
301 MediaType -> Next MediaType
303 Device -> Next Device
305 Allow multiple Storage specifications
313 Allow Multiple Pool specifications (note, Pool currently
315 Allow Multiple MediaType specifications in Dir conf
316 Allow Multiple Device specifications in Dir conf
317 Perhaps keep this in a single SSR
318 Tie a Volume to a specific device by using a MediaType that
319 is contained in only one device.
320 In SD allow Device to have Multiple MediaTypes
322 - Look at www.nu2.nu/pebuilder as a helper for full windows
324 - Ideas from Jerry Scharf:
325 First let's point out some big pluses that bacula has for this
327 more importantly it's active. Thank you so much for that
328 even more important, it's not flaky
329 it has an open access catalog, opening many possibilities
330 it's pushing toward heterogeneous systems capability
332 Macintosh file client
333 macs are an interesting niche, but I fear a server is a rathole
334 working bare iron recovery for windows
335 the option for inc/diff backups not reset on fileset revision
336 a) use both change and inode update time against base time
337 b) do the full catalog check (expensive but accurate)
338 sizing guide (how much system is needed to back up N systems/files)
339 consultants on using bacula in building a disaster recovery system
341 or how to get at fancy things that one could do with bacula
342 logwatch code for bacula logs (or similar)
343 linux distro inclusion of bacula (brings good and bad, but necessary)
344 win2k/XP server capability (icky but you asked)
345 support for Oracle database ??
347 - Look at adding SQL server and Exchange support for Windows.
348 - Each DVD-RAM disk would be a volume, just like each tape is
349 a volume. It's a 4.7GB media with random access, but there's nothing about
350 it that I can see that makes it so different than a tape from bacula's
351 perspective. Why couldn't I back up to a bare floppy as a volume (ignoring
353 - Make dev->file and dev->block_num signed integers so that -1 can
354 be an invalid value which happens with BSR.
355 - Create VolAddr for disk files in place of VolFile and VolBlock. This
356 is needed to properly specify ranges.
357 - Add progress of files/bytes to SD and FD.
358 - Print warning message if FileId > 4 billion
359 - do a "messages" before the first prompt in Console
360 - Add a date and time stamp at the beginning of every line in the
361 Job report (Volker Sauer).
362 - Client does not show busy during Estimate command.
363 - Implement Console mtx commands.
364 - Implement a Mount Command and an Unmount Command where
365 the users could specify a system command to be performed
366 to do the mount, after which Bacula could attempt to
367 read the device. This is for Removeable media such as a CDROM.
368 - Most likely, this mount command would be invoked explicitly
369 by the user using the current Console "mount" and "unmount"
370 commands -- the Storage Daemon would do the right thing
371 depending on the exact nature of the device.
372 - As with tape drives, when Bacula wanted a new removable
373 disk mounted, it would unmount the old one, and send a message
374 to the user, who would then use "mount" as described above
375 once he had actually inserted the disk.
376 - Implement dump/print label to UA
377 - Spool to disk only when the tape is full, then when a tape is hung move
379 - bextract is sending everything to the log file ****FIXME****
380 - Allow multiple Storage specifications (or multiple names on
381 a single Storage specification) in the Job record. Thus a job
382 can be backed up to a number of storage devices.
383 - Implement some way for the File daemon to contact the Director
384 to start a job or pass its DHCP obtained IP number.
385 - Implement a query tape prompt/replace feature for a console
386 - Copy console @ code to gnome2-console
387 - Make AES the only encryption algorithm see
388 http://csrc.nist.gov/CryptoToolkit/aes/). It's
389 an officially adopted standard, has survived peer
390 review, and provides keys up to 256 bits.
391 - Take a careful look at SetACL http://setacl.sourceforge.net
392 - Take a careful look at Level for the estimate command, maybe make
393 it a command line option.
394 - Add Volume name to "I cannot write on this volume because"
395 - Make tree walk routines like cd, ls, ... more user friendly
396 by handling spaces better.
397 - Make sure that Bacula rechecks the tape after the 20 min wait.
398 - Set IO_NOWAIT on Bacula TCP/IP packets.
399 - Try doing a raw partition backup and restore by mounting a
402 Yes, it would allow to highly automatic the request for new tapes. If a
403 tape is empty, bacula reads the barcodes (native or simulated), and if
404 an unused tape is found, it runs the label command with all the
405 necessary parameters.
407 By the way can bacula automatically "move" an empty/purged volume say
408 in the "short" pool to the "long" pool if this pool runs out of volume
410 - What to do about "list files job=xxx".
411 - Make Dmsg look at global before calling subroutine.
412 - Get and test MySQL 4.0
413 - Look at how fuser works and /proc/PID/fd that is how Nic found the
414 file descriptor leak in Bacula.
415 - Implement WrapCounters in Counters.
416 - Add heartbeat from FD to SD if hb interval expires.
417 - Can we dynamically change FileSets?
418 - If pool specified to label command and Label Format is specified,
419 automatically generate the Volume name.
420 - Why can't SQL do the filename sort for restore?
421 - Look into Microsoft Volume Shadowcopy Service VSS for backing
422 up system state components (Active Directory, System Volume, ...)
423 - Add ExhautiveRestoreSearch
424 - Look at the possibility of loading only the necessary
425 data into the restore tree (i.e. do it one directory at a
426 time as the user walks through the tree).
427 - Possibly use the hash code if the user selects all for a restore command.
428 - Fix "restore all" to bypass building the tree.
429 - Prohibit backing up archive device (findlib/find_one.c:128)
430 - Implement Release Device in the Job resource to unmount a drive.
431 - Implement Acquire Device in the Job resource to mount a drive,
432 be sure this works with admin jobs so that the user can get
433 prompted to insert the correct tape. Possibly some way to say to
434 run the job but don't save the files.
435 - Make things like list where a file is saved case independent for
438 - Use autochanger to handle multiple devices.
439 - Add SuSE install doc to list.
440 - Check and rechedk "Invalid block number"
441 - User wants to NOT backup up certain big files (email files).
442 - Maybe remove multiple simultaneous devices code in SD.
443 - On Windows with very long path names, it may be impossible to create
444 a file (and thus restore it) because the total length is too long.
445 We must cd into the directory then create the file without the
447 - Implement a Recycle command
448 - Add client name to cram-md5 challenge so Director can immediately
449 verify if it is the correct client.
450 - Audit all UA commands to ensure that we always prompt where possible.
451 - Make bootstrap filename unique.
452 - Test a second language e.g. french.
453 - Start working on Base jobs.
454 - Implement UnsavedFiles DB record.
455 - Implement argc/argv for daemon command line scanning using table driven
457 - From Phil Stracchino:
458 It would probably be a per-client option, and would be called
459 something like, say, "Automatically purge obsoleted jobs". What it
460 would do is, when you successfully complete a Differential backup of a
461 client, it would automatically purge all Incremental backups for that
462 client that are rendered redundant by that Differential. Likewise,
463 when a Full backup on a client completed, it would automatically purge
464 all Differential and Incremental jobs obsoleted by that Full backup.
465 This would let people minimize the number of tapes they're keeping on
466 hand without having to master the art of retention times.
467 - Implement a M_SECURITY message class.
468 - When doing a Backup send all attributes back to the Director, who
469 would then figure out what files have been deleted.
470 - Currently in mount.c:236 the SD simply creates a Volume. It should have
471 explicit permission to do so. It should also mark the tape in error
472 if there is an error.
473 - SD Bytes Read is wrong.
474 - Investigate doing RAW backup of Win32 partition.
475 - Cancel waiting for Client connect in SD if FD goes away.
477 - Implement timeout in response() when it should come quickly.
478 - Implement console @echo command.
479 - Implement a Slot priority (loaded/not loaded).
480 - Implement "vacation" Incremental only saves.
481 - Implement single pane restore (much like the Gftp panes).
482 - Implement Automatic Mount even in operator wait.
483 - Implement create "FileSet"?
484 - Implement restore "current system", but take all files without
485 doing selection tree -- so that jobs without File records can
487 - Add prefixlinks to where or not where absolute links to FD.
488 - Issue message to mount a new tape before the rewind.
489 - Simplified client job initiation for portables.
490 - If SD cannot open a drive, make it periodically retry.
491 - Add more of the config info to the tape label.
493 - If tape is marked read-only, then try opening it read-only rather than
494 failing, and remember that it cannot be written.
495 - Refine SD waiting output:
496 Device is being positioned
497 > Device is being positioned for append
498 > Device is being positioned to file x
500 - Figure out some way to estimate output size and to avoid splitting
501 a backup across two Volumes -- this could be useful for writing CDROMs
502 where you really prefer not to have it split -- not serious.
503 - Have SD compute MD5 or SHA1 and compare to what FD computes.
504 - Make VolumeToCatalog calculate an MD5 or SHA1 from the
505 actual data on the Volume and compare it.
506 - Implement Bacula plugins -- design API
507 - Make bcopy read through bad tape records.
508 - Program files (i.e. execute a program to read/write files).
509 Pass read date of last backup, size of file last time.
510 - Add Signature type to File DB record.
511 - CD into subdirectory when open()ing files for backup to
512 speed up things. Test with testfind().
513 - Priority job to go to top of list.
514 - Why are save/restore of device different sizes (sparse?) Yup! Fix it.
515 - Implement some way for the Console to dynamically create a job.
516 - Restore to a particular time -- e.g. before date, after date.
517 - Solaris -I on tar for include list
518 - Need a verbose mode in restore, perhaps to bsr.
519 - bscan without -v is too quiet -- perhaps show jobs.
520 - Add code to reject whole blocks if not wanted on restore.
521 - Check if we can increase Bacula FD priorty in Win2000
522 - Make sure the MaxVolFiles is fully implemented in SD
523 - Check if both CatalogFiles and UseCatalog are set to SD.
524 - Figure out how to do a bare metal Windows restore
525 - Possibly add email to Watchdog if drive is unmounted too
526 long and a job is waiting on the drive.
527 - After unmount, if restore job started, ask to mount.
528 - Convert all %x substitution variables, which are hard to remember
529 and read to %(variable-name). Idea from TMDA.
530 - Remove NextId for SQLite. Optimize.
531 - Move all SQL statements into a single location.
532 - Add UA rc and history files.
533 - put termcap (used by console) in ./configure and
534 allow -with-termcap-dir.
535 - Fix Autoprune for Volumes to respect need for full save.
536 - Fix Win32 config file definition name on /install
537 - Compare tape to Client files (attributes, or attributes and data)
538 - Make all database Ids 64 bit.
539 - Write an applet for Linux.
540 - Allow console commands to detach or run in background.
541 - Fix status delay on storage daemon during rewind.
542 - Add SD message variables to control operator wait time
543 - Maximum Operator Wait
544 - Minimum Message Interval
545 - Maximum Message Interval
546 - Send Operator message when cannot read tape label.
547 - Verify level=Volume (scan only), level=Data (compare of data to file).
548 Verify level=Catalog, level=InitCatalog
550 - Add keyword search to show command in Console.
551 - Events : tape has more than xxx bytes.
552 - Complete code in Bacula Resources -- this will permit
553 reading a new config file at any time.
554 - Handle ctl-c in Console
555 - Implement script driven addition of File daemon to config files.
556 - Think about how to make Bacula work better with File (non-tape) archives.
557 - Write Unix emulator for Windows.
558 - Put memory utilization in Status output of each daemon
559 if full status requested or if some level of debug on.
560 - Make database type selectable by .conf files i.e. at runtime
561 - Set flag for uname -a. Add to Volume label.
562 - Restore files modified after date
563 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
564 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
565 - Timout a job or terminate if link goes down, or reopen link and query.
566 - Concept of precious tapes (cannot be reused).
567 - Make bcopy copy with a single tape drive.
568 - Permit changing ownership during restore.
571 > My suggestion: Add a feature on the systray menu-icon menu to request
572 > an immediate backup now. This would be useful for laptop users who may
573 > not be on the network when the regular scheduled backup is run.
575 > My wife's suggestion: Add a setting to the win32 client to allow it to
576 > shut down the machine after backup is complete (after, of course,
577 > displaying a "System will shut down in one minute, click here to cancel"
578 > warning dialog). This would be useful for sites that want user
579 > woorkstations to be shut down overnight to save power.
582 - Autolabel should be specified by DIR instead of SD.
585 - AutoScan (check checksum of tape)
586 - Format command = "format /dev/nst0"
590 - Seek resolution (usually corresponds to buffer size)
591 - EODErrorCode=ENOSPC or code
592 - Partial Read error code
593 - Partial write error code
594 - Nonformatted read error
595 - Nonformatted write error
596 - WriteProtected error
600 - IgnoreCloseErrors=yes
610 - FD sends unsaved file list to Director at end of job (see
612 - File daemon should build list of files skipped, and then
613 at end of save retry and report any errors.
614 - Write a Storage daemon that uses pipes and
615 standard Unix programs to write to the tape.
617 - Need something that monitors the JCR queue and
618 times out jobs by asking the deamons where they are.
619 - Enhance Jmsg code to permit buffering and saving to disk.
620 - device driver = "xxxx" for drives.
622 - Ensure that /dev/null works
623 - Need report class for messages. Perhaps
624 report resource where report=group of messages
625 - enhance scan_attrib and rename scan_jobtype, and
626 fill in code for "since" option
627 - Director needs a time after which the report status is sent
628 anyway -- or better yet, a retry time for the job.
629 - Don't reschedule a job if previous incarnation is still running.
630 - Some way to automatically backup everything is needed????
631 - Need a structure for pending actions:
633 - termination status (part of buffered msgs?)
635 Read, Write, Clean, Delete
636 - Login to Bacula; Bacula users with different permissions:
637 owner, group, user, quotas
638 - Store info on each file system type (probably in the job header on tape.
639 This could be the output of df; or perhaps some sort of /etc/mtab record.
641 ========= ideas ===============
642 From: "Jerry K. Schieffer" <jerry@skylinetechnology.com>
643 To: <kern@sibbald.com>
644 Subject: RE: [Bacula-users] future large programming jobs
645 Date: Thu, 26 Feb 2004 11:34:54 -0600
647 I noticed the subject thread and thought I would offer the following
648 merely as sources of ideas, i.e. something to think about, not even as
649 strong as a request. In my former life (before retiring) I often
650 dealt with backups and storage management issues/products as a
651 developer and as a consultant. I am currently migrating my personal
652 network from amanda to bacula specifically because of the ability to
653 cross media boundaries during storing backups.
654 Are you familiar with the commercial product called ADSM (I think IBM
655 now sells it under the Tivoli label)? It has a couple of interesting
656 ideas that may apply to the following topics.
658 1. Migration: Consider that when you need to restore a system, there
659 may be pressure to hurry. If all the information for a single client
660 can eventually end up on the same media (and in chronological order),
661 the restore is facillitated by not having to search past information
662 from other clients. ADSM has the concept of "client affinity" that
663 may be associated with it's storage pools. It seems to me that this
664 concept (as an optional feature) might fit in your architecture for
667 ADSM also has the concept of defining one or more storage pools as
668 "copy pools" (almost mirrors, but only in the sense of contents).
669 These pools provide the ability to have duplicte data stored both
670 onsite and offsite. The copy process can be scheduled to be handled
671 by their storage manager during periods when there is no backup
672 activity. Again, the migration process might be a place to consider
673 implementing something like this.
676 > It strikes me that it would be very nice to be able to do things
678 > have the Job(s) backing up the machines run, and once they have all
679 > completed, start a migration job to copy the data from disks Volumes
681 > a tape library and then to offsite storage. Maybe this can already
683 > done with some careful scheduling and Job prioritzation; the events
684 > mechanism described below would probably make it very easy.
686 This is the goal. In the first step (before events), you simply
688 the Migration to tape later.
690 2. Base jobs: In ADSM, each copy of each stored file is tracked in
691 the database. Once a file (unique by path and metadata such as dates,
692 size, ownership, etc.) is in a copy pool, no more copies are made. In
693 other words, when you start ADSM, it begins like your concept of a
694 base job. After that it is in the "incremental" mode. You can
695 configure the number of "generations" of files to be retained, plus a
696 retention date after which even old generations are purged. The
697 database tracks the contents of media and projects the percentage of
698 each volume that is valid. When the valid content of a volume drops
699 below a configured percentage, the valid data are migrated to another
700 volume and the old volume is marked as empty. Note, this requires
701 ADSM to have an idea of the contents of a client, i.e. marking the
702 database when an existing file was deleted, but this would solve your
703 issue of restoring a client without restoring deleted files.
705 This is pretty far from what bacula now does, but if you are going to
706 rip things up for Base jobs,.....
707 Also, the benefits of this are huge for very large shops, especially
708 with media robots, but are a pain for shops with manual media
712 > Base jobs sound pretty useful, but I'm not dying for them.
714 Nobody is dying for them, but when you see what it does, you will die
717 3. Restoring deleted files: Since I think my comments in (2) above
718 have low probability of implementation, I'll also suggest that you
719 could approach the issue of deleted files by a mechanism of having the
720 fd report to the dir, a list of all files on the client for every
721 backup job. The dir could note in the database entry for each file
722 the date that the file was seen. Then if a restore as of date X takes
723 place, only files that exist from before X until after X would be
724 restored. Probably the major cost here is the extra date container in
725 each row of the files table.
727 Thanks for "listening". I hope some of this helps. If you want to
728 contact me, please send me an email - I read some but not all of the
729 mailing list traffic and might miss a reply there.
731 Please accept my compliments for bacula. It is doing a great job for
732 me!! I sympathize with you in the need to wrestle with excelence in
733 execution vs. excelence in feature inclusion.
738 ==============================
741 - Design at hierarchial storage for Bacula. Migration and Clone.
742 - Implement FSM (File System Modules).
743 - Audit M_ error codes to ensure they are correct and consistent.
744 - Add variable break characters to lex analyzer.
745 Either a bit mask or a string of chars so that
746 the caller can change the break characters.
747 - Make a single T_BREAK to replace T_COMMA, etc.
748 - Ensure that File daemon and Storage daemon can
749 continue a save if the Director goes down (this
750 is NOT currently the case). Must detect socket error,
751 buffer messages for later.
752 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
753 - Add ability to backup to two Storage devices (two SD sessions) at
754 the same time -- e.g. onsite, offsite.
755 - Add the ability to consolidate old backup sets (basically do a restore
756 to tape and appropriately update the catalog). Compress Volume sets.
757 Might need to spool via file is only one drive is available.
758 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
759 someway to do so with every volume that has less than x% valid
763 Migration: Move a backup from one Volume to another
764 Clone: Copy a backup -- two Volumes
766 Bacula Migration is based on Jobs (apparently Networker is file by file).
768 Migration triggered by:
772 Highwater mark (keep total size)
777 ======================================================
779 It is somewhat like a Full save becomes an incremental since
780 the Base job (or jobs) plus other non-base files.
782 - A Base backup is same as Full backup, just different type.
783 - New BaseFiles table that contains:
785 BaseJobId - Base JobId referenced for this FileId (needed ???)
786 JobId - JobId currently running
787 FileId - File not backed up, exists in Base Job
788 FileIndex - FileIndex from Base Job.
789 i.e. for each base file that exists but is not saved because
790 it has not changed, the File daemon sends the JobId, BaseId,
791 FileId, FileIndex back to the Director who creates the DB entry.
792 - To initiate a Base save, the Director sends the FD
793 the FileId, and full filename for each file in the Base.
794 - When the FD finds a Base file, he requests the Director to
795 send him the full File entry (stat packet plus MD5), or
796 conversely, the FD sends it to the Director and the Director
797 says yes or no. This can be quite rapid if the FileId is kept
798 by the FD for each Base Filename.
799 - It is probably better to have the comparison done by the FD
800 despite the fact that the File entry must be sent across the
802 - An alternative would be to send the FD the whole File entry
803 from the start. The disadvantage is that it requires a lot of
804 space. The advantage is that it requires less communications
806 - The Job record must be updated to indicate that one or more
808 - At end of Job, FD returns:
809 1. Count of base files/bytes not written to tape (i.e. matches)
810 2. Count of base file that were saved i.e. had changed.
811 - No tape record would be written for a Base file that matches, in the
812 same way that no tape record is written for Incremental jobs where
813 the file is not saved because it is unchanged.
814 - On a restore, all the Base file records must explicitly be
815 found from the BaseFile tape. I.e. for each Full save that is marked
816 to have one or more Base Jobs, search the BaseFile for all occurrences
818 - An optimization might be to make the BaseFile have:
824 This would avoid the need to explicitly fetch each File record for
825 the Base job. The Base Job record will be fetched to get the
826 VolSessionId and VolSessionTime.
827 =========================================================
830 ==========================================================
832 For each Incremental job that is run, there may be files that
833 were found but not saved because they were locked (this applies
834 only to Windows). Such a system could send back to the Director
835 a list of Unsaved files.
837 - New UnSavedFiles table that contains:
841 - Then in the next Incremental job, the list of Unsaved Files will be
842 feed to the FD, who will ensure that they are explicitly chosen even
843 if standard date/time check would not have selected them.
844 =============================================================
847 Done: (see kernsdone for more)
850 - John's Full save failed with 1.32c FD and 1.31 Dir no FD status,
851 and no error message.
852 - Add fd and st as Console keywords.
853 - Recycling volume with a Slot requires an operator intervention:
854 rufus-dir: Start Backup JobId 18, Job=kernsave.2003-11-01_21.23.52
855 rufus-dir: Pruned 1 Job on Volume Vol01 from catalog.
856 rufus-dir: There are no Jobs associated with Volume Vol01. Marking it purged.
857 rufus-dir: Recycled volume "Vol01"
858 rufus-sd: Please mount Volume "Vol01" on Storage Device "DDS-4" for Job kernsave.2003-11-01_21.23.52
859 Use "mount" command to release Job.
860 - Implement Dan's bacula script (email of 26 Oct).
861 - Add JobName= to VerifyToCatalog so that all verifies can be done at the end.
862 - Edit the Client/Storage name into authentication failure messages.
863 - Fix packet too big problem. This is most likely a Windows TCP stack
865 - Implement ClientRunBeforeJob and ClientRunAfterJob.
866 - Implement forward spacing block/file: position_device(bsr) --
867 just before read_block_from_device();
870 Multiple drive autochanger data: see Alan Brown
871 mtx -f xxx unloadStorage Element 1 is Already Full(drive 0 was empty)
872 Unloading Data Transfer Element into Storage Element 1...source Element
875 (drive 0 was empty and so was slot 1)
876 > mtx -f xxx load 15 0
877 no response, just returns to the command prompt when complete.
878 > mtx -f xxx status Storage Changer /dev/changer:2 Drives, 60 Slots ( 2 Import/Export )
879 Data Transfer Element 0:Full (Storage Element 15 Loaded):VolumeTag = HX001
880 Data Transfer Element 1:Empty
881 Storage Element 1:Empty
882 Storage Element 2:Full :VolumeTag=HX002
883 Storage Element 3:Full :VolumeTag=HX003
884 Storage Element 4:Full :VolumeTag=HX004
885 Storage Element 5:Full :VolumeTag=HX005
886 Storage Element 6:Full :VolumeTag=HX006
887 Storage Element 7:Full :VolumeTag=HX007
888 Storage Element 8:Full :VolumeTag=HX008
889 Storage Element 9:Full :VolumeTag=HX009
890 Storage Element 10:Full :VolumeTag=HX010
891 Storage Element 11:Empty
892 Storage Element 12:Empty
893 Storage Element 13:Empty
894 Storage Element 14:Empty
895 Storage Element 15:Empty
896 Storage Element 16:Empty....
897 Storage Element 28:Empty
898 Storage Element 29:Full :VolumeTag=CLNU01L1
899 Storage Element 30:Empty....
900 Storage Element 57:Empty
901 Storage Element 58:Full :VolumeTag=NEX261L2
902 Storage Element 59 IMPORT/EXPORT:Empty
903 Storage Element 60 IMPORT/EXPORT:Empty
905 Unloading Data Transfer Element into Storage Element 15...done
907 (just to verify it remembers where it came from, however it can be
908 overrriden with mtx unload {slotnumber} to go to any storage slot.)
910 There needs to be a table of drive # to devices somewhere - If there are
911 multiple changers or drives there may not be a 1:1 correspondance between
912 changer drive number and system device name - and depending on the way the
913 drives are hooked up to scsi busses, they may not be linearly numbered
914 from an offset point either.something like
916 Autochanger drives = 2
917 Autochanger drive 0 = /dev/nst1
918 Autochanger drive 1 = /dev/nst2
919 IMHO, it would be _safest_ to use explicit mtx unload commands at all
920 times, not just for multidrive changers. For a 1 drive changer, that's
926 MTX's manpage (1.2.15):
927 unload [<slotnum>] [ <drivenum> ]
928 Unloads media from drive <drivenum> into slot
929 <slotnum>. If <drivenum> is omitted, defaults to
930 drive 0 (as do all commands). If <slotnum> is
931 omitted, defaults to the slot that the drive was
932 loaded from. Note that there's currently no way
933 to say 'unload drive 1's media to the slot it
934 came from', other than to explicitly use that
935 slot number as the destination.AB
941 undef# camcontrol devlist
942 <WANGTEK 51000 SCSI M74H 12B3> at scbus0 target 2 lun 0 (pass0,sa0)
943 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 0 (pass1,sa1)
944 <ARCHIVE 4586XX 28887-XXX 4BGD> at scbus0 target 4 lun 1 (pass2)
946 tapeinfo -f /dev/sg0 with a bad tape in drive 1:
947 [kern@rufus mtx-1.2.17kes]$ ./tapeinfo -f /dev/sg0
948 Product Type: Tape Drive
950 Product ID: 'C5713A '
953 TapeAlert[3]: Hard Error: Uncorrectable read/write error.
954 TapeAlert[20]: Clean Now: The tape drive neads cleaning NOW.
961 Medium Type: Not Loaded
966 DataDeCompEnabled: yes
973 Handling removable disks
975 From: Karl Cunningham <karlc@keckec.com>
977 My backups are only to hard disk these days, in removable bays. This is my
978 idea of how a backup to hard disk would work more smoothly. Some of these
979 things Bacula does already, but I mention them for completeness. If others
980 have better ways to do this, I'd like to hear about it.
982 1. Accommodate several disks, rotated similar to how tapes are. Identified
983 by partition volume ID or perhaps by the name of a subdirectory.
984 2. Abort & notify the admin if the wrong disk is in the bay.
985 3. Write backups to different subdirectories for each machine to be backed
987 4. Volumes (files) get created as needed in the proper subdirectory, one
989 5. When a disk is recycled, remove or zero all old backup files. This is
990 important as the disk being recycled may be close to full. This may be
991 better done manually since the backup files for many machines may be
992 scattered in many subdirectories.
997 - Add "Rerun failed levels = yes/no" to Job resource.
998 - Fix CDROM make script to permit picking up already installed
1000 - Add date/time to each Jmsg.