]> git.sur5r.net Git - bacula/bacula/blob - bacula/kernstodo
See kes-1.33; restore fixes, cleanups, must update regress
[bacula/bacula] / bacula / kernstodo
1                  Kern's ToDo List
2                 22 December 2003  
3
4 Documentation to do: (any release a little bit at a time)
5 - Document running a test version.
6 - Document query file format.
7 - Document static linking
8 - Document problems with Verify and pruning.
9 - Document how to use multiple databases.
10 - For FreeBSD typical /dev/nrsa0 and for mtx /dev/pass1
11 - VXA drives have a "cleaning required"
12   indicator, but Exabyte recommends preventive cleaning after every 75
13   hours of operation.
14   From Phil:
15     In this context, it should be noted that Exabyte has a command-line
16     vxatool utility available for free download.  (The current version is
17     vxatool-3.72.) It can get diagnostic info, read, write and erase tapes,
18     test the drive, unload tapes, change drive settings, flash new firmware,
19     etc.
20     Of particular interest in this context is that vxatool <device> -i will
21     report, among other details, the time since last cleaning in tape motion
22     minutes.  This information can be retrieved (and settings changed, for
23     that matter) through the generic-SCSI device even when Bacula has the
24     regular tape device locked.  (Needless to say, I don't recommend
25     changing tape settings while a job is running.)
26 - Lookup HP cleaning recommendations.
27 - Lookup HP tape replacement recommendations (see trouble shooting autochanger)
28 - Create a man page for each binary (Debian package requirement).
29           
30 Testing to do: (painful)
31 - that ALL console command line options work and are always implemented
32 - blocksize recognition code.
33 - Test if rewind at end of tape waits for tape to rewind.
34 - Test cancel at EOM.       
35
36 For 1.33 Testing/Documentation:
37 - Document new alias records in Director. SDAddress SDDeviceName, SDPassword.
38   FDPassword, FDAddress, DBAddress, DBPort, DBPassword.
39 - Document new Include/Exclude ...
40 - Add test of exclusion, test multiple Include {} statements.
41 - Add counter variable test.
42 - Document ln -sf /usr/lib/libncurses.so /usr/lib/libtermcap.so
43   and install the esound-dev  package for compiling Console on SuSE.
44 - Add an example of using a FIFO in dirdconf.wml 
45 - Add an item to the FAQ about running jobs in different timezones.
46 - Add some examples of job editing codes.
47
48 - Document Dan's new --with-dir-user, ... options.
49   See userid.txt
50 - Figure out how to use ssh or stunnel to protect Bacula communications.
51   Add Dan's work to manual
52   See ssl.txt
53 - Add db check test to regression. Test each function like delete,
54   purge, ...
55 - Add subsections to the Disaster Recovery index section.
56                 
57 For 1.33
58 - Release SQLite 2.8.8
59 - If a tape is recycled while it is mounted, Stanislav Tvrudy must do an
60   additional mount to deblock the job.
61 - Notes for final checking of Nic's code:
62   Could I get you to double check the switch () statements in the
63   job_check_maxwaittime and job_check_maxruntime functions in
64   src/dird/job.c?
65 - In restore, provide option for limiting to a particular Pool.
66 - In restore, list FileSets that only have different base names --
67   i.e. any FileSet with the same name should be treated as the same.
68 - From Johan Decock:
69   bscan: sql_update.c:65 UPDATE File SET MD5='Ij+5kwN6TFIxK+8l8+/I+A' WHERE FileId=0
70   bscan: bscan.c:1074 Could not add MD5/SHA1 to File record. ERR=sql_update.c:65 Update problem: affected_rows=0
71 - Do scheduling by UTC using gmtime_r() in run_conf, scheduler, and   
72   ua_status.!!! Thanks to Alan Brown for this tip.
73 - Look at Dan's field width problems in PostgreSQL.
74 - Look at effect of removing GROUP BYs.
75 - In restore take all filesets with same base name.
76 - From Alan Brown <ajb2@mssl.ucl.ac.uk>
77     BTW, there's a make install bug in 1.33 - with --enable-gnome,
78     gnome-console is built, but the binary and .conf are not being installed.
79 - Make Scheduler sort jobs by StartTime, Priority.
80 - Make sure smtp and any other useful program is executable by the world
81   in case Bacula is not running as root.
82 - Look at updating Volume Jobs so that Max Volume Jobs = 1 will work
83   correctly for multiple simultaneous jobs.
84 - Correct code so that FileSet MD5 is calculated for < and | filename   
85   generation.
86 - Permit Bacula and apcupsd donations.
87 - Mark Volume in error on error from WEOF.
88 - Why does Bacula need the drive open to do "autochanger list" ?
89 - Add a .list all files in the restore tree (probably also a list all files)
90   Do both a long and short form.
91 - Add a Media record flag that indicates that the Volume does disk
92   addressing.
93 - Implement VolAddr, which is used when Volume is addressed like a disk,
94   and form it from VolFile and VolBlock.
95 - Make multiple restore jobs for multiple media types specifying 
96   the proper storage type.
97 - Implement MediaType keyword in bsr?   
98 - Fix fast block rejection (stored/read_record.c:118). It passes a null
99   pointer (rec) to try_repositioning().
100 - Look at extracting Win data from BackupRead.
101 - Having dashes in filenames apparently creates problems for restore
102   by filename.
103 - Add data compare on write/read in btape "test". 
104 - Implement RestoreJobRetention? Maybe better "JobRetention" in a Job,
105   which would take precidence over the Catalog "JobRetention".
106 - Implement Label Format in Add and Label console commands.
107 - Possibly up network buffers to 65K. Put on variable.
108 - Put email tape request delays on one or more variables. User wants
109   to cancel the job after a certain time interval.  Maximum Mount Wait?
110   Job, Client, Device, Pool, or Volume?
111   Is it possible to make this a directive which is *optional* in multiple
112   resources, like Level? If so, I think I'd make it an optional directive
113   in Job, Client, and Pool, with precedence such that Job overrides Client
114   which in turn overrides Pool.
115 - Fix Ctl-C crashing the Console (readline?).
116 - Finish work on conio.c
117 - To pass Include 1 or two letter commands
118   I Name           Include name - first record
119   B Name           Base name - repeat
120   R "xxx"          Regexp
121   W "xxx"          Wild Card
122   E zzz            Exclude expression (wild card)
123   P "plugin"       Plugin
124   D "reader"       Reader program
125   T "writer"       Writer program
126   O Options        In current commpressed format
127     (compression, signature, onefs, recurse, sparse,
128      replace, verify options, ...)
129   N                End option set
130   B BaseName       Start second option set any letter
131   ...
132   E
133   F Number         Number of filenames to follow
134   <file-name>
135   B Name
136   ...
137   N                End option set
138   F Number         Number of filenames to follow
139   <file-name>
140   ...
141 - New Storage specifications:
142   Passed to SD as a sort of BSR record called Storage Specification
143     Record or SSR.
144     SSR                    
145       Next -> Next SSR
146       MediaType -> Next MediaType
147       Pool -> Next Pool
148       Device -> Next Device
149   Write Copy Resource that makes a copy of a resource.
150   Job Resource
151      Allow multiple Storage specifications
152      New flags
153         One Archive = yes
154         One Device = yes
155         One Storage = yes
156         One MediaType = yes
157         One Pool = yes
158   Storage
159      Allow Multiple Pool specifications (note, Pool currently
160        in Job resource).
161      Allow Multiple MediaType specifications
162      Allow Multiple Device specifications
163      Perhaps keep this in a single SSR
164   Tie a Volume to a specific device by using a MediaType that 
165     is contained in only one device.
166   In SD allow Device to have Multiple MediaTypes
167
168 After 1.33:
169 - Look at adding SQL server and Exchange support for Windows. 
170 - Restore: Enter Filename: 'C:/Documents and Settings/Comercial/My
171   Documents/MOP/formulário de registro BELAS ARTES.doc' causes Bacula to
172   crash.
173 - Each DVD-RAM disk would be a volume, just like each tape is 
174   a volume. It's a 4.7GB media with random access, but there's nothing about 
175   it that I can see that makes it so different than a tape from  bacula's 
176   perspective. Why couldn't I back up to a bare floppy as a volume (ignoring 
177   the media capacity?)
178 - Make dev->file and dev->block_num signed integers so that -1 can
179   be an invalid value which happens with BSR.
180 - Create VolAddr for disk files in place of VolFile and VolBlock. This
181   is needed to properly specify ranges.
182 - Print bsmtp output to job report so that problems will be seen.
183 - Pass the number of files to be restored to the FD for reporting 
184 - Add progress of files/bytes to SD and FD.
185 - Don't continue Restore if no files selected.
186 - Print warning message if FileId > 4 billion
187 - do a "messages" before the first prompt in Console
188 - Add a date and time stamp at the beginning of every line in the 
189   Job report (Volker Sauer).
190 - Client does not show busy during Estimate command.
191 - Implement Console mtx commands.
192 - Look at 2Gb limit for SQLite.
193 - Implement 3 Pools for a Job:
194    Job {
195      Name = ...
196      Full Backup Pool = xxx
197      Incremental Backup Pool = yyy
198      Differential Backup Pool = zzz
199    }
200 - Add a default DB password to MySQL.  
201   GRANT all privileges ON bacula.* TO bacula@localhost IDENTIFIED BY 
202      'bacula_password';
203   FLUSH PRIVILEGES;
204 - Define week of year for scheduler.  W01, W02, ...
205   Week 01 of a year is per definition the first week that has the
206   Thursday in this year, which is equivalent to the week that contains the
207   fourth day of January.  In other words, the first week of a new year is
208   the week that has the majority of its days in the new year.  Week 01
209   might also contain days from the previous year and the week before week
210   01 of a year is the last week (52 or 53) of the previous year even if it
211   contains days from the new year.  A week starts with Monday (day 1) and
212   ends with Sunday (day 7).  For example, the first week of the year 1997
213   lasts from 1996-12-30 to 1997-01-05 and can be written in standard
214   notation as
215
216     1997-W01 or 1997W01
217
218   The week notation can also be extended by a number indicating the day
219   of the week.  For example, the day 1996-12-31, which is the Tuesday (day
220   2) of the first week of 1997, can also be written as
221
222     1997-W01-2 or 1997W012
223
224 - Implement a Mount Command and an Unmount Command where
225   the users could specify a system command to be performed
226   to do the mount, after which Bacula could attempt to
227   read the device. This is for Removeable media such as a CDROM.
228   - Most likely, this mount command would be invoked explicitly
229   by the user using the current Console "mount" and "unmount" 
230   commands -- the Storage Daemon would do the right thing 
231   depending on the exact nature of the device.
232   - As with tape drives, when Bacula wanted a new removable
233   disk mounted, it would unmount the old one, and send a message
234   to the user, who would then use "mount" as described above 
235   once he had actually inserted the disk.
236 - Implement dump/print label to UA
237 - Implement disk spooling. Two parts: 1. Spool to disk then
238   immediately to tape to speed up tape operations. 2. Spool to
239   disk only when the tape is full, then when a tape is hung move
240   it to tape.
241 - Scratch Pool where the volumes can be re-assigned to any Pool.
242 - bextract is sending everything to the log file ****FIXME****
243 - Add Progress command that periodically reports the progress of
244   a job or all jobs.
245 - Restrict characters permitted in a Resource name, and don't permit
246   duplicate names.
247 - Allow multiple Storage specifications (or multiple names on
248   a single Storage specification) in the Job record. Thus a job 
249   can be backed up to a number of storage devices.
250 - Implement some way for the File daemon to contact the Director 
251   to start a job or pass its DHCP obtained IP number.
252 - Implement multiple Consoles.
253 - Implement a query tape prompt/replace feature for a console
254 - From Johan?
255     Two jobs ready to go, first one blocked waiting for media
256     Cancel 2nd job ("waiting execution" one)
257     Cancel blocked job
258     boom - segfault*
259 - Copy console @ code to gnome2-console
260 - Make AES the only encryption algorithm see 
261   http://csrc.nist.gov/CryptoToolkit/aes/).  It's
262   an officially adopted standard, has survived peer
263   review, and provides keys up to 256 bits.
264 - Add ctl-c to console to stop current command and discard buffered
265   output.
266 - Estimate to Tibs never returns.
267 - Think about how space could be freed up on a tape -- perhaps this
268   is a Merge or Compact feature that is needed.
269 - Modify FileSet, did not upgrade the current Increment job, but
270   waited for the next job to be upgraded.
271 - Take a careful look at SetACL http://setacl.sourceforge.net     
272 - Implement a where command for the tree telling where a file
273   is located.
274 - Take a careful look at Level for the estimate command, maybe make
275   it a command line option.
276 - Add Volume name to "I cannot write on this volume because"
277 - Make restore job check if all the files are actually restored.
278 - Make tree walk routines like cd, ls, ... more user friendly
279   by handling spaces better.
280 - Write your PID file and chown root:wheel before drop.
281 - Make sure there is no symlink in a file before creating a
282   file (attack).
283 - Look at mktemp or mkstemp(3).
284     mktemp and mkstemp create files with predictable names too.  That's
285     not the vulnerability.  The vulnerability is in creating files without
286     using the O_EXCL flag, which means "only create this file if it doesn't
287     exist, including if the file is a dangling symlink."
288
289     It is *NOT* enough to do the equivalent of
290
291       if doesn't exist $filename
292        then create $filename
293
294     because between the test and the create another process could have
295     gotten the CPU and created the file.  You must use atomic functions
296     (those that don't get interrupted by other processes) and O_EXCL is
297     the only way for this particular example.
298 - Automatically create pools, but instead of looking for what
299   in in Job records, walk through the pool resources.
300 - Check and double check tree code, why does it take so long?
301 - Add device name to "Current Volume not acceptable because ..."
302 - Make sure that Bacula rechecks the tape after the 20 min wait.
303 - Set IO_NOWAIT on Bacula TCP/IP packets.
304 - Try doing a raw partition backup and restore by mounting a
305   Windows partition.
306 - Report CVS problems to SourceForge.
307 - Implement .consolerc for Console
308 - From Lars Köllers:
309     Yes, it would allow to highly automatic the request for new tapes. If a 
310     tape is empty, bacula reads the barcodes (native or simulated), and if 
311     an unused tape is found, it runs the label command with all the 
312     necessary parameters.
313
314     By the way can bacula automatically "move" an empty/purged volume say 
315     in the "short" pool to the "long" pool if this pool runs out of volume 
316     space?
317 - Either restrict the characters in a name, or fix the problem 
318   emailing with names containing / (smtp command line breaks).
319 - Eliminate orphaned jobs: dbcheck, normal pruning, delete job command.
320   Hm.  Well, there are the remaining orphaned job records:
321
322      |   105 | Llioness Save  | 0000-00-00 00:00:00 | B    | D     |        0 |             0 | f         |
323      |   110 | Llioness Save  | 0000-00-00 00:00:00 | B    | I     |        0 |             0 | f         |
324      |   115 | Llioness Save  | 2003-09-10 02:22:03 | B    | I     |        0 |             0 | A         |
325      |   128 | Catalog Save   | 2003-09-11 03:53:32 | B    | I     |        0 |             0 | C         |
326      |   131 | Catalog Save   | 0000-00-00 00:00:00 | B    | I     |        0 |             0 | f         |
327
328      As you can see, three of the five are failures.  I already deleted the
329      one restore and one other failure using the by-client option.  Deciding
330      what is an orphaned job is a tricky problem though, I agree.  All these
331      records have or had 0 files/ 0 bytes, except for the restore.  With no
332      files, of course, I don't know of the job ever actually becomes
333      associated with a Volume.
334
335      (I'm not sure if this is documented anywhere -- what are the meanings of
336      all the possible JobStatus codes?)
337
338      Looking at my database, it appears to me as though all the "orphaned"
339      jobs fit into one of two categories:
340
341      1)  The Job record has a StartTime but no EndTime, and the job is not
342          currently running;
343      or
344      2)  The Job record has an EndTime, indicating that it completed, but
345          it has no associated JobMedia record.
346
347
348      This does suggest an approach.  If failed jobs (or jobs that, for some
349      other reason, write no files) are associated with a volume via a
350      JobMedia record, then they should be purged when the associated volume
351      is purged.  I see two ways to handle jobs that are NOT associated with a
352      specific volume:
353
354      1)  purge them automatically whenever any volume is manually purged;
355      or
356      2)  add an option to the purge command to manually purge all jobs with
357          no associated volume.
358
359      I think Restore jobs also fall into category 2 above ....  so one might
360      want to make that "The Job record has an EndTime,, but no associated
361      JobMedia record, and is not a Restore job."  
362 - make "btape /tmp" work.
363 - Make sure a rescheduled job is properly reported by status.
364 - Walk through the Pool records rather than the Job records
365   in dird.c to create/update pools.
366 - What to do about "list files job=xxx".
367 - Implement scan: for every slot it finds, zero the slot of
368   Volume other volume having that slot.
369 - When job rescheduled, status gives is waiting for Client Rufus 
370   to connect to Storage File. Dir needs to inform SD that job
371   is rescheduled.
372 - Fix get_storage_from_media_type (ua_restore) to use command line     
373   storage=
374 - Don't print "Warning: Wrong Volume mounted ..." if mounting second volume.
375 - Make Dmsg look at global before calling subroutine.
376 - Enable trace output at runtime for Win32
377 - Available volumes for autochangers (see patrick@baanboard.com 3 Sep 03 
378   and 4 Sep) scan slots.
379 - Get and test MySQL 4.0
380 - Do a complete audit of all pthreads_mutex, cond, ... to ensure that
381   any that are dynamically initialized are destroyed when no longer used.
382 - Write a mini-readline with history and editing.
383 - Look at how fuser works and /proc/PID/fd that is how Nic found the
384   file descriptor leak in Bacula.
385 - Implement WrapCounters in Counters.
386 - Turn on SIGHUP in dird.c and test.
387 - Use system dependent calls to get more precise info on tape errors.
388 - Add heartbeat from FD to SD if hb interval expires.
389 - Suppress read error on blank tape when doing a label.
390 - Can we dynamically change FileSets?
391 - If pool specified to label command and Label Format is specified,
392   automatically generate the Volume name.
393 - Take a careful look a the Basic recycling algorithm.  When Bacula
394   chooses, the order should be:
395    - Look for Append
396    - Look for Recycle or Purged
397    - Prune volumes
398    - Look for purged
399   Instead of using lowest media Id, find the least recently used
400   volume.
401
402   When the tape is mounted and Bacula requests the status
403   - Do everything possible to use it.
404
405   Define a "available" status, which is the currently mounted 
406   Volume and all volumes that are currently in the autochanger.
407
408 - Why can't SQL do the filename sort for restore?
409 - Is a pool specification really needed for a restore?  Yes, and
410   you may want to exclude archive Pools.
411 - Look at libkse (man kse) for FreeBSD threading.
412 - Look into Microsoft Volume Shadowcopy Service VSS for backing
413   up system state components (Active Directory, System Volume, ...)
414 - Add ExhautiveRestoreSearch
415 - Look at the possibility of loading only the necessary 
416   data into the restore tree (i.e. do it one directory at a
417   time as the user walks through the tree).
418 - Possibly use the hash code if the user selects all for a restore command.
419 - Orphaned Dir buffer at parse_conf.c:373 =>  store_dir
420 - Add Console usr permissions.
421 - Fix "restore all" to bypass building the tree.
422 - Fix restore to list errors if Invalid block found, and if # files
423   restored does not match # expected.
424 - Prohibit backing up archive device (findlib/find_one.c:128)
425 - Implement Release Device in the Job resource to unmount a drive.
426 - Implement Acquire Device in the Job resource to mount a drive,
427   be sure this works with admin jobs so that the user can get
428   prompted to insert the correct tape.  Possibly some way to say to
429   run the job but don't save the files.
430 - Implement FileOptions (see end of this document)
431 - Make things like list where a file is saved case independent for
432   Windows.
433 - Implement migrate
434 - Implement a PostgreSQL driver.
435 - Bacula needs to propagate SD errors.
436   > > cluster-dir: Start Backup JobId 252, Job=REUTERS.2003-08-11_15.04.12
437   > > prod4-sd: REUTERS.2003-08-11_15.04.12 Error: Write error on device 
438        /dev/nst0. ERR=Input/output error.
439   > > prod4-sd: REUTERS.2003-08-11_15.04.12 Error: Re-read of last block failed. 
440        Last block=5162 Current block=5164.
441   > > prod4-sd: End of medium on Volume "REU007" Bytes=16,303,521,933 
442
443 - Use autochanger to handle multiple devices.
444 - Add SuSE install doc to list.
445 - Check and rechedk "Invalid block number"
446 - Make bextract release the drive properly between tapes 
447   so that an autochanger can be made to work.
448 - User wants to NOT backup up certain big files (email files).
449 - Maybe remove multiple simultaneous devices code in SD.
450 - On Windows with very long path names, it may be impossible to create 
451   a file (and thus restore it) because the total length is too long.
452   We must cd into the directory then create the file without the
453   full path name.
454 - lstat() is not going to work on Win32 for testing date.
455 - Something is not right in last block of fill command.
456 - Implement a Recycle command
457 - Add FileSet to command line arguments for restore.
458 - Add client name to cram-md5 challenge so Director can immediately
459   verify if it is the correct client.
460 - Add JobLevel in FD status (but make sure it is defined).
461 - Audit all UA commands to ensure that we always prompt where possible.
462 - Check Jmsg in bnet, may not work, must dup bsock.
463 - Suppress Job Name in Jmsg for console
464 - Create Pools that are referenced in a Run statement at startup if possible.
465 - Use runbeforejob to unload, then reload a volume previously used,
466   then the next job run gets an error reading the drive.
467 - Make bootstrap filename unique.
468 - Test a second language e.g. french.
469 - Start working on Base jobs.
470 - Make "make binary-release" work from any directory.
471 - Implement UnsavedFiles DB record.
472 - Implement argc/argv for daemon command line scanning using table driven
473   stuff below.
474 - Implement table driven single argc/argv scanner to pickup all arguments.
475   Much like xxx_conf.c scan table.
476   keyword, handler(store_routine), store_address, code, flags, default.
477 - From Phil Stracchino:
478   It would probably be a per-client option, and would be called
479   something like, say, "Automatically purge obsoleted jobs".  What it
480   would do is, when you successfully complete a Differential backup of a
481   client, it would automatically purge all Incremental backups for that
482   client that are rendered redundant by that Differential.  Likewise,
483   when a Full backup on a client completed, it would automatically purge
484   all Differential and Incremental jobs obsoleted by that Full backup.
485   This would let people minimize the number of tapes they're keeping on
486   hand without having to master the art of retention times.
487 - Implement a M_SECURITY message class.
488 - When doing a Backup send all attributes back to the Director, who
489   would then figure out what files have been deleted.
490 - Currently in mount.c:236 the SD simply creates a Volume. It should have
491   explicit permission to do so.  It should also mark the tape in error
492   if there is an error.
493 - Make sure all restore counters are working correctly in the FD.
494 - SD Bytes Read is wrong.
495 - Look at ALL higher level routines that call block.c to be sure
496   they don't expect something in errmsg.
497 - Investigate doing RAW backup of Win32 partition.
498 - Add thread specific data to hold the jcr -- send error messages from
499   low level routines by accessing it and using Jmsg().
500 - Cancel waiting for Client connect in SD if FD goes away.
501
502 - Examine Bare Metal restore problem (a FD crash exists somewhere ...).
503 - Implement timeout in response() when it should come quickly.
504 - Implement console @echo command.
505 - Implement a Slot priority (loaded/not loaded).
506 - Implement "vacation" Incremental only saves.
507 - Implement single pane restore (much like the Gftp panes).
508 - Implement Automatic Mount even in operator wait.
509 - Implement create "FileSet"?
510 - Fix watchdog pthread crash on Win32 (this is pthread_kill() Cygwin bug)
511 - Implement "scratch pool" where tapes are defined and can be
512   taken by any pool that needs them.
513 - Implement restore "current system", but take all files without
514   doing selection tree -- so that jobs without File records can
515   be restored.
516 - Implement a relocatable bacula.spec 
517 - Add prefixlinks to where or not where absolute links to FD.
518 - Issue message to mount a new tape before the rewind.
519 - Simplified client job initiation for portables.
520 - If SD cannot open a drive, make it periodically retry.
521 - Add more of the config info to the tape label.
522
523 - If tape is marked read-only, then try opening it read-only rather than
524   failing, and remember that it cannot be written.
525 - Refine SD waiting output:
526     Device is being positioned
527     >     Device is being positioned for append
528     >     Device is being positioned to file x
529     > 
530 - Figure out some way to estimate output size and to avoid splitting
531   a backup across two Volumes -- this could be useful for writing CDROMs
532   where you really prefer not to have it split -- not serious.
533 - Have SD compute MD5 or SHA1 and compare to what FD computes.
534 - Make VolumeToCatalog calculate an MD5 or SHA1 from the 
535   actual data on the Volume and compare it.                  
536 - Implement Bacula plugins -- design API
537 - Make bcopy read through bad tape records.
538 - Program files (i.e. execute a program to read/write files).
539   Pass read date of last backup, size of file last time.
540 - Add Signature type to File DB record.
541 - CD into subdirectory when open()ing files for backup to
542   speed up things.  Test with testfind().
543 - Priority job to go to top of list.
544 - Why are save/restore of device different sizes (sparse?)   Yup! Fix it.
545 - Implement some way for the Console to dynamically create a job.
546 - Restore to a particular time -- e.g. before date, after date. 
547 - Solaris -I on tar for include list
548 - Need a verbose mode in restore, perhaps to bsr.
549 - bscan without -v is too quiet -- perhaps show jobs.
550 - Add code to reject whole blocks if not wanted on restore.
551 - Check if we can increase Bacula FD priorty in Win2000
552 - Make sure the MaxVolFiles is fully implemented in SD
553 - Check if both CatalogFiles and UseCatalog are set to SD.
554 - Figure out how to do a bare metal Windows restore
555 - Possibly add email to Watchdog if drive is unmounted too
556   long and a job is waiting on the drive.
557 - Restore program that errs in SD due to no tape, reports
558   OK incorrectly in output.
559 - After unmount, if restore job started, ask to mount.
560 - Convert all %x substitution variables, which are hard to remember
561   and read to %(variable-name).  Idea from TMDA.
562 - Remove NextId for SQLite. Optimize.
563 - Move all SQL statements into a single location.
564 - Add UA rc and history files.
565 - put termcap (used by console) in ./configure and
566   allow -with-termcap-dir.
567 - Enhance time and size scanning routines.
568 - Fix Autoprune for Volumes to respect need for full save.
569 - Fix Win32 config file definition name on /install
570 - Compare tape to Client files (attributes, or attributes and data) 
571 - Make all database Ids 64 bit.
572 - Write an applet for Linux.
573 - Allow console commands to detach or run in background.
574 - Fix status delay on storage daemon during rewind.
575 - Add SD message variables to control operator wait time
576   - Maximum Operator Wait
577   - Minimum Message Interval
578   - Maximum Message Interval
579 - Send Operator message when cannot read tape label.
580 - Verify level=Volume (scan only), level=Data (compare of data to file).
581   Verify level=Catalog, level=InitCatalog
582 - Events file
583 - Add keyword search to show command in Console.
584 - Events : tape has more than xxx bytes.
585 - Complete code in Bacula Resources -- this will permit
586   reading a new config file at any time.
587 - Handle ctl-c in Console
588 - Implement script driven addition of File daemon to config files.
589 - Think about how to make Bacula work better with File (non-tape) archives.
590 - Write Unix emulator for Windows.
591 - Put memory utilization in Status output of each daemon
592   if full status requested or if some level of debug on.
593 - Make database type selectable by .conf files i.e. at runtime
594 - Set flag for uname -a.  Add to Volume label.
595 - Implement throttled work queue.
596 - Restore files modified after date
597 - SET LD_RUN_PATH=$HOME/mysql/lib/mysql
598 - Implement Restore FileSet=
599 - Create a protocol.h and protocol.c where all protocol messages
600   are concentrated.
601 - Remove duplicate fields from jcr (e.g. jcr.level and jcr.jr.Level, ...).
602 - Timout a job or terminate if link goes down, or reopen link and query.
603 - Concept of precious tapes (cannot be reused).
604 - Make bcopy copy with a single tape drive.
605 - Permit changing ownership during restore.
606
607 - From Phil:
608   > My suggestion:  Add a feature on the systray menu-icon menu to request
609   > an immediate backup now.  This would be useful for laptop users who may
610   > not be on the network when the regular scheduled backup is run.
611   > 
612   > My wife's suggestion: Add a setting to the win32 client to allow it to
613   > shut down the machine after backup is complete (after, of course,
614   > displaying a "System will shut down in one minute, click here to cancel"
615   > warning dialog).  This would be useful for sites that want user
616   > woorkstations to be shut down overnight to save power.
617   > 
618
619 - From Terry Manderson <terry@apnic.net>
620    jobdefs { # new structure
621      name = "monthlyUnixBoxen"
622      type = backup
623      level = full
624      schedule = monthly
625      storage = DLT
626      messages = Standard
627      pool = MonthlyPool
628      priority = 10
629    }
630
631    job {
632      name = "wakame"
633      jobdefs = "genericUnixSet"
634      client = wakame-fd
635    }
636
637    job {
638      name = "durian"
639      jobdefs = "genericUnixSet"
640      client = durian-fd
641    }
642
643    job {
644      name = "soy"
645      jobdefs = "UnixDevelBoxSet"
646      client = soy-fd
647    }
648
649
650 - Autolabel should be specified by DIR instead of SD.
651 - Storage daemon    
652   - Add media capacity
653   - AutoScan (check checksum of tape)
654   - Format command = "format /dev/nst0"
655   - MaxRewindTime
656   - MinRewindTime
657   - MaxBufferSize
658   - Seek resolution (usually corresponds to buffer size)
659   - EODErrorCode=ENOSPC or code
660   - Partial Read error code
661   - Partial write error code
662   - Nonformatted read error
663   - Nonformatted write error
664   - WriteProtected error
665   - IOTimeout
666   - OpenRetries
667   - OpenTimeout
668   - IgnoreCloseErrors=yes
669   - Tape=yes
670   - NoRewind=yes
671 - Pool
672   - Maxwrites
673   - Recycle period
674 - Job
675   - MaxWarnings
676   - MaxErrors (job?)
677 =====
678 - FD sends unsaved file list to Director at end of job (see
679   RFC below).
680 - File daemon should build list of files skipped, and then
681   at end of save retry and report any errors.
682 - Write a Storage daemon that uses pipes and
683   standard Unix programs to write to the tape.
684   See afbackup.
685 - Need something that monitors the JCR queue and
686   times out jobs by asking the deamons where they are.
687 - Enhance Jmsg code to permit buffering and saving to disk.
688 - device driver = "xxxx" for drives.
689 - Verify from Volume
690 - Ensure that /dev/null works
691 - Need report class for messages. Perhaps
692   report resource where report=group of messages
693 - enhance scan_attrib and rename scan_jobtype, and
694   fill in code for "since" option 
695 - Director needs a time after which the report status is sent
696   anyway -- or better yet, a retry time for the job.
697 - Don't reschedule a job if previous incarnation is still running.
698 - Some way to automatically backup everything is needed????
699 - Need a structure for pending actions:
700   - buffered messages
701   - termination status (part of buffered msgs?)
702 - Drive management
703   Read, Write, Clean, Delete
704 - Login to Bacula; Bacula users with different permissions:
705    owner, group, user, quotas
706 - Store info on each file system type (probably in the job header on tape.
707   This could be the output of df; or perhaps some sort of /etc/mtab record.
708
709 Longer term to do:
710 - Design at hierarchial storage for Bacula. Migration and Clone. 
711 - Implement FSM (File System Modules).
712 - Audit M_ error codes to ensure they are correct and consistent.
713 - Add variable break characters to lex analyzer.
714   Either a bit mask or a string of chars so that
715   the caller can change the break characters.
716 - Make a single T_BREAK to replace T_COMMA, etc.
717 - Ensure that File daemon and Storage daemon can
718   continue a save if the Director goes down (this
719   is NOT currently the case). Must detect socket error,
720   buffer messages for later. 
721 - Enhance time/duration input to allow multiple qualifiers e.g. 3d2h
722 - Add ability to backup to two Storage devices (two SD sessions) at
723   the same time -- e.g. onsite, offsite.
724 - Add the ability to consolidate old backup sets (basically do a restore
725   to tape and appropriately update the catalog). Compress Volume sets.
726   Might need to spool via file is only one drive is available.
727 - Compress or consolidate Volumes of old possibly deleted files. Perhaps
728   someway to do so with every volume that has less than x% valid 
729   files.
730
731
732 Migration: Move a backup from one Volume to another
733 Clone:     Copy a backup -- two Volumes
734
735 Bacula Migration is based on Jobs (apparently Networker is file by file).
736
737 Migration triggered by:
738   Number of Jobs
739   Number of Volumes
740   Age of Jobs
741   Highwater mark (keep total size)
742   Lowwater mark
743   
744
745
746 ======================================================
747         Base Jobs design
748 It is somewhat like a Full save becomes an incremental since
749 the Base job (or jobs) plus other non-base files.
750 Need:
751 - A Base backup is same as Full backup, just different type.
752 - New BaseFiles table that contains:
753     BaseId - index
754     BaseJobId - Base JobId referenced for this FileId (needed ???)
755     JobId - JobId currently running
756     FileId - File not backed up, exists in Base Job
757     FileIndex - FileIndex from Base Job.
758   i.e. for each base file that exists but is not saved because
759   it has not changed, the File daemon sends the JobId, BaseId,
760   FileId, FileIndex back to the Director who creates the DB entry.
761 - To initiate a Base save, the Director sends the FD 
762   the FileId, and full filename for each file in the Base.
763 - When the FD finds a Base file, he requests the Director to
764   send him the full File entry (stat packet plus MD5), or
765   conversely, the FD sends it to the Director and the Director
766   says yes or no. This can be quite rapid if the FileId is kept
767   by the FD for each Base Filename.          
768 - It is probably better to have the comparison done by the FD
769   despite the fact that the File entry must be sent across the
770   network.
771 - An alternative would be to send the FD the whole File entry
772   from the start. The disadvantage is that it requires a lot of
773   space. The advantage is that it requires less communications
774   during the save.
775 - The Job record must be updated to indicate that one or more
776   Bases were used.
777 - At end of Job, FD returns:   
778    1. Count of base files/bytes not written to tape (i.e. matches)
779    2. Count of base file that were saved i.e. had changed.
780 - No tape record would be written for a Base file that matches, in the
781   same way that no tape record is written for Incremental jobs where
782   the file is not saved because it is unchanged.
783 - On a restore, all the Base file records must explicitly be
784   found from the BaseFile tape. I.e. for each Full save that is marked
785   to have one or more Base Jobs, search the BaseFile for all occurrences
786   of JobId.
787 - An optimization might be to make the BaseFile have:
788      JobId
789      BaseId
790      FileId
791   plus
792      FileIndex
793   This would avoid the need to explicitly fetch each File record for
794   the Base job.  The Base Job record will be fetched to get the
795   VolSessionId and VolSessionTime.
796 =========================================================  
797
798   
799
800 =============================================================
801
802                 Request For Comments For File Backup Options
803                    10 November 2002
804
805 Subject: File Backup Options
806
807 Problem: 
808   A few days ago, a Bacula user who is backing up to file volumes and
809   using compression asked if it was possible to suppress compressing
810   all .gz files since it was a waste of CPU time. Although Bacula
811   currently permits using different options (compression, ...) on
812   a directory by directory basis, it cannot do it on a file by 
813   file basis, which is clearly what was desired.   
814
815 Proposed Implementation:
816   To solve this problem, I propose the following:
817
818   - Add a new Director resource type called Options.  
819
820   - The Options resource will have records for all
821     options that can currently be specified on the Include record 
822     (in a FileSet).  Examples below.
823
824   - The Options resource will permit an exclude option as well
825     as a number of additional options.
826
827   - The heart of the Options resource is the ability to
828     supply any number of Match records which specify POSIX
829     regular expressions.  These Match regular expressions are
830     applied to the fully qualified filename (path and all). If
831     one matches, then the Options will be used.
832
833   - When an Match specification matches an included file, the
834     options specified in the Options resource will override
835     the default options specified on the Include record.
836
837   - Include records will be modified to permit referencing one or
838     more Options resources.  The Options will be used
839     in the order listed on the Include record and the first
840     one that matches will be applied.
841
842   - Options (or specifications) currently supplied on the Include
843     record will be deprecated (i.e. removed in a later version a
844     year or so from now).
845
846   - The Exclude record will be deprecated as the same functionality
847     can be obtained by using an Exclude = yes in the Options.
848
849 Options records:
850   The following records can appear in the Options resource. An
851   asterisk preceding the name indicates a feature not currently
852   implemented.
853
854     - Regexp "xxx"            - Match regular expression
855     - Wild "xxx"              - Do a wild card match
856
857   For Backup Jobs:
858     - Compression= (GZIP, ...)
859     - Signature=   (MD5, SHA1, ...)
860     - *Encryption=
861     - OneFs=      (yes/no)    - remain on one filesystem
862     - Recurse=    (yes/no)    - recurse into subdirectories
863     - Sparse=     (yes/no)    - do sparse file backup
864     - *Exclude=   (yes/no)    - exclude file from being saved
865     - *Reader=    (filename)  - external read (backup) program
866     - *Plugin=    (filename)  - read/write plugin module
867
868     - Include=    (yes/no)    - Include the file matched no additional
869                                 patterns are applied.
870
871   For Verify Jobs:
872     - verify=     (ipnougsamc5) - verify options
873
874   For Restore Jobs:
875     - replace= (always/ifnewer/ifolder/never) - replace options currently
876                                                 implemented in 1.31
877     - *Writer= (filename)   - external write (restore) program
878
879
880 Implementation:
881   Currently options specifying compression, MD5 signatures, recursion,
882   ... of a FileSet are supplied on the Include record. These will now
883   all be collected into a Options resource, which will be
884   specified in the Include in place of the options. Multiple Options
885   may be specified.  Since the Options may contain regular expressions
886   that are applied to the full filename, this will give the ability
887   to specify backup options on a file by file basis to whatever level
888   of detail you wish.
889
890 Example:
891
892   Today:
893
894     FileSet {
895       Name = "FullSet"
896       Include = compression=GZIP signature=MD5 {
897         /
898       }
899     }
900
901   Proposal:
902
903     FileSet {
904       Name = "FullSet"
905       Include {
906         Compression = GZIP;
907         Signature = MD5
908         Wild  = /*.?*/                # matches all files.
909         File = /
910       }
911     }
912
913   That's a lot more to do the same thing, but it gives the ability to
914   apply options on a file by file basis.  For example, suppose you
915   want to compress all files but not any file with extensions .gz or .Z.
916   In that case, you will need to group two sets of options using
917   the Options resource. Files may be anywhere except in an
918   option set???  All OptionSets apply to all files in the order
919   the OptionSets were specified.  To have files included with
920   different option sets without using wild-cards, use two or more
921   Includes -- each one is handled in turn using only the files and
922   optionsets specified in the include.
923
924     FileSet {
925       Name = "FullSet"
926       Include {
927         OptionSet {
928           Signature = MD5
929           # Note multiple Matches are ORed
930           Wild  = "*.gz"   # matches .gz files
931           Wild  = "*.Z"    # matches .Z files
932         }
933         OptionSet {
934           Compression = GZIP
935           Signature = MD5
936           Wild  = "*.?*"   # matches all files
937         }
938         File = /
939       }
940     }
941
942   Now, since the no Compression option is specified in the
943   first group of Options, *.gz or *.Z file will have an MD5 signature computed,
944   but will not be compressed. For all other files, the *.gz *.Z will not
945   match, so the second group of options will be used which will include GZIP
946   compression.
947
948 Questions:
949   - Is it necessary to provide some means of ANDing regular expressions
950     and negation?  (not currently planned)
951
952     e.g.  Wild  = /*.gz/ && !/big.gz/
953
954   - I see that Networker has a "null" module which, if specified, does not 
955     backup the file, but does make an record of the file in the catalog
956     so that the catalog will reflect an exact picture of the filesystem.
957     The result is that the file can be "seen" when "browsing" the save
958     sets, but it cannot be restored.
959     
960     Is this really useful?  Should it be implemented in Bacula?
961   
962 Results:
963   After implementing the above, the user will be able to specify
964   on a file by file basis (using regular expressions) what options are
965   applied for the backup.
966
967
968 =============================================
969
970 ========================================================== 
971     Unsaved File design
972 For each Incremental job that is run, there may be files that
973 were found but not saved because they were locked (this applies
974 only to Windows). Such a system could send back to the Director
975 a list of Unsaved files.
976 Need:
977 - New UnSavedFiles table that contains:
978   JobId
979   PathId
980   FilenameId
981 - Then in the next Incremental job, the list of Unsaved Files will be
982   feed to the FD, who will ensure that they are explicitly chosen even
983   if standard date/time check would not have selected them.
984 =============================================================
985
986
987 Done: (see kernsdone for more)
988
989 === after 1.32c
990 - John's Full save failed with 1.32c FD and 1.31 Dir no FD status,
991   and no error message.
992 - Add fd and st as Console keywords.
993 - Recycling volume with a Slot requires an operator intervention:
994     rufus-dir: Start Backup JobId 18, Job=kernsave.2003-11-01_21.23.52
995     rufus-dir: Pruned 1 Job on Volume Vol01 from catalog.
996     rufus-dir: There are no Jobs associated with Volume Vol01. Marking it purged.
997     rufus-dir: Recycled volume "Vol01"
998     rufus-sd: Please mount Volume "Vol01" on Storage Device "DDS-4" for Job kernsave.2003-11-01_21.23.52
999     Use "mount" command to release Job.
1000 - Implement Dan's bacula script (email of 26 Oct).
1001 - Add JobName= to VerifyToCatalog so that all verifies can be done at the end.
1002 - Edit the Client/Storage name into authentication failure messages.
1003 - Fix packet too big problem. This is most likely a Windows TCP stack 
1004   problem.
1005 - Implement ClientRunBeforeJob and ClientRunAfterJob.
1006 - Implement forward spacing block/file: position_device(bsr) --
1007   just before read_block_from_device();
1008 === for 1.33
1009 - Change console to bconsole.
1010 - Change smtp to bsmtp.
1011 - Fix time difference problem between Bacula and Client
1012   so that everything is in GMT.
1013 - Fix TimeZone problem!
1014 - Mount a tape that is not right for the job (wrong # files on tape)
1015   Bacula asks for another tape, fix problems with first tape and
1016   say "mount". All works OK, but status shows:
1017    Device /dev/nst0 open but no Bacula volume is mounted.
1018        Total Bytes=1,153,820,213 Blocks=17,888 Bytes/block=64,502
1019        Positioned at File=9 Block=3,951
1020    Full Backup job Rufus.2003-10-26_16.45.31 using Volume "DLT-24Oct03" on device /dev/nst0
1021        Files=21,003 Bytes=253,954,408 Bytes/sec=2,919,016
1022        FDReadSeqNo=192,134 in_msg=129830 out_msg=5 fd=7
1023 - Upgrade to cygwin 1.5
1024 - Optimize fsf not to read.
1025 - Use ioctl() fsf if it exists. Figure out where we are from
1026   the mt_status command. Use slow fsf only if other does not work.
1027 - Enhance "update slots" to include a "scan" feature
1028   scan 1; scan 1-5; scan 1,2,4 ...  to update the catalog 
1029 - Allow a slot or range of slots on the label barcodes command.
1030 - Finish implementation of Verify=DiskToCatalog
1031 - Make sure that Volumes are recycled based on "Least recently used"
1032   rather than lowest MediaId.
1033 - Add flag to write only one EOF mark on the tape.
1034 - Implement autochanger testing in btape "test" command.
1035 - Implement lmark to list everyfile marked.
1036 - Make mark/unmark report how many files marked/unmarked.
1037 - Keep last 5 or 10 completed jobs and show them in a similar list.
1038 - Make a Running Jobs: output similar to current Scheduled Jobs:
1039 - Change "create_media_record in bscan to use Archive instead of Full.
1040 - Have some way to estimate the restore size or have it printed.
1041 - Volume problems occurs if you have valid volume, written, then it is
1042   truncated. You get 12-Nov-2003 11:48 rufus-sd: kernsave.2003-11-12_11.48.09 Warning: mount.c:228 Volume on /tmp is not a Bacula labeled Volume, because:
1043      block.c:640 Read zero bytes on device /tmp.
1044 - Make sure that 64 bit I/O packets are used on Cygwin.
1045 - Add to supported autochangers 
1046   OS              : FreeBSD-4.9
1047   Auto-Changer    : QUALSTAR TLS-4210
1048     Manufufactur  : Qualstar
1049     Tapes         : 12 (AIT1: 36GB, AIT2: 50GB all uncompressed)
1050     Drives        : 2xAIT2 (installed in the Qualstar: SONY SDX-500C AIT2)
1051 - Document estimate command in tree.
1052 - Document lsmark command in tree.
1053 - Setup a standard job that builds a bootstrap file and saves
1054   it with the catalog database.
1055 - See if a restore job can add a file to the tape (prohibit this).