1 Technical notes on version 1.39
6 - Change cats/sql.c to elimate %-*s format, which I think is turned
8 - Add Comment field to llist of a volume.
9 - Allow true/false in some yes/no questions.
10 - Implement update volume enable=(on|off|true|false|archived|0|1|2)
11 - Remove a few /n's when scanning commands from another daemon. This
12 permits adding additional fields later.
13 - Modify dbcheck to handle ctl-d and to delete Log table entries.
16 - Tweak authentication to work with 1.38.x FDs.
17 - Tweak catalog make scripts.
18 - Fix catalog upgrade scripts so that they work.
19 - Correct despooling debug code to eliminate race condition.
21 - Add additional fields as specified by Arno to LocationLog.
22 - Add comment field to the Media record.
23 - Add Time field to the Log record.
24 - Correct migration SQL (thanks to Bill Moran) so that it
25 runs with PostgreSQL also.
26 - Add spooling/despooling info in status output of SD.
28 - Spend a lot of time integrating mkcdrec with the rescue disk.
29 - Add VOLMGMT message class for volume management messages (none yet).
30 - Add CATALOG as a destination. It goes into the LOG table.
31 - Implement the Log table in the DB.
32 - Implement the Location Log table in the DB (for user use).
33 - At Eric's request add a run_scripts() just after blast_data in
36 - Add Enabled column to Location, correct some typos in DB schemas.
37 - Correct bug I introduced into RunScripts enum.
38 - Add log table to Catalog
39 - Purge original job migrated if the migration terminates normally.
40 - Cleanup purging of files/jobs so that it is done only in a
42 - Add new VOLMGMT message class.
43 - Add Catalog message destination (user conf code remains to be written).
45 - Modify read_record and friends to properly deal with migration
47 - Update debug code in read_record.
49 ======================= Warning ==========================
50 Separate read and write storage in Jobs in the Director. This
51 is a major rewrite of some of the low level code and hence has
52 a high probability of introducing bugs.
53 ==========================================================
55 - Move the job init code up to *before* the job is put into
56 the job queue (resource allocation queue). This permits the
57 job to establish whether it will read or write or do both.
58 - Add name() methods to all the resource classes.
59 - Implement separate read and write storage resource
60 allocation/deallocation in jobq.c
62 ======================= Warning ==========================
63 Implemented new method of getting the default Storage from the Media
64 record rather than from the MediaType for restore. As a fall
65 back, if no Storage is defined, use the MediaType. This
66 eliminates most all prompts if there are multiple MediaTypes
67 used. This is an important and fundamental change.
68 ==========================================================
70 - Add more detail (Storage, Device) to list of volumes printed
72 - More code in migrate. In particular start multiple jobs if
74 - Probably overkill, but ensure that the bsr is unique even within a
76 - Rework bsys.c drop() so that it now should work as expected.
77 - Update a bunch of old copyrights -- particularly in .h files.
78 - Remove src/lib/bshm.c/h
82 ======================= Warning ==========================
83 All hash codes in the database are now kept in world
84 compatible base64 format (no = filling). This means that
85 all FileSets will be updated and if you are running
86 verify jobs, you must do an InitCatalog.
87 Authentication uses the new algorithm, but should be
88 backward compatible with 1.38.x
89 ===========================================================
91 - Modify the authentication routines so that the 1.39.15 Director
92 always runs with the compatible binary to base64 code (same as
93 the rest of the world). It will however detect if an SD or
94 FD is running the old code and if that is the case, will use
95 the old algorithm for authentication. However, all consoles must
96 use the compatible algorithm, and all data entered into the database
97 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
98 use the compatible algorithm.
99 - Rename the cram_md5 routine names to be slightly more appropriate
100 to what they are doing (challenge and respond).
101 - Robert committed his #ifdef and header cleanup.
103 - Fix a complier warning in files/backup.c
104 - Cleanup NOT NULL vs DEFALT 0 in database creation.
106 - Robert committed his low impact changes.
107 - I removed a size_t from the jcr.h definition.
108 - Update the tape regression scripts (still to be tested).
109 - Add gcc and gcc-c++ requires to srm as suggested by a user.
110 - Require done or quit to exit from in memory tree restore.
112 - Write install/uninstall of new manpages. There are now a
113 pile of man pages. Some of which need a lot of work.
115 ======================= Warning ==========================
116 The --mandir ./configure option now points to the top level
117 man directory. The man files will be installed under
118 mandir/man8 and mandir/man1 as appropriate.
119 ==========================================================
121 - Add complete text of GPL to LICENSE.
122 - Implement job report that indicates where Storage and Pool
123 came from -- with overrides and Pool storage and NextPool,
124 it is all very complicated.
125 - Create a few common subroutines for backup.c and migrate.c
126 - Eliminate warning messages from tray-monitor.c
128 - Apply fix for scheduler for missing unlock_jobs().
129 - Clean out autoconf caches before rebuilding configure
130 - Fix the FreeBSD pthreads lib define updated by Dan.
131 - Add missing semicolon in src/console/console.c
132 - Add Robert's enhanced version of build-win32-cross-tools
133 as well as his patch file.
134 - Note, the new gcc options are likely to break building of
135 wx-console or the tray-monitor ...
137 - Implement Robert's suggestion to suppress printing compile lines.
138 - Detect GCC correctly (I hope)
139 - If using GCC (actually g++) add the following compiler flags
140 -fno-strict-aliasing -fno-exceptions -fno-rtti
142 ===================== Warning =============================
143 Turn on new bsnprintf() code. This could cause print output
145 ===========================================================
147 - Fix crypto when not using openssl. I previously overlooked this.
148 - Eliminate crypto type punning problems by eliminating void * and
149 using uint8_t * instead.
150 - Harden authentication failure in FD by single threading errors
151 and forcing a 6 second wait.
153 ===================== Warning =============================
154 Removed "Accept Any Volume" directive.
155 ===========================================================
157 - Major cleanup and simplification of regress using shell functions
158 (more tests to be converted to new format)
159 - Add detection of 64 bit Irix as indicated by user.
160 - Increment catalog database id from 9 to 10.
161 - Add a few of the new database fields to the various C++
163 - Implement code to fill in the most important new fields (e.g.
165 - Ensure that most of the new fields are in create/get/insert/update.
166 More work to be done.
168 - Update some very old licenses in src/cats.
169 - Modify the database format for handling Migration jobs:
170 Add PriorJobId, RealEndTime to Job table
172 Remove Stripe from JobMedia record (not used, wasting space)
173 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
174 Add Cost to Location table.
175 - Delete mac_record subroutines.
176 - Add new table values to create/update/get routines as appropriate.
177 - Update the update_tables and make_tables scripts.
178 - Make a first cut in using a union where multiple pointers (actually
179 pointers to pointers) are stored.
180 - Make some changes to base64.c suggested by Robert and others and add
181 a small amount of documentation.
182 - Add some changes suggested by Peter for Solaris (bregex...)
183 - Make runscript.h always built because it needs to be pulled into
184 more places. In particular its RES was left out of a union.
185 - Renumber the enum{} list in runscript.h to avoid starting from zero.
186 This makes it slightly easier to detect uninitialized variables.
188 - Remove xpg4 lib from FreeBSD build as it is no longer needed and
189 sometimes creates install problems.
190 - Change a couple of %T in strftime to %H:%M:%S as seen in Robert
191 Nelson's code. More to do.
192 - Convert a few store_bit to store_bool in filed_conf.c.
193 - DVD tweak to block.c as supplied by Uwe Muessel.
195 - Modify configure.in to check for typeof().
196 - In findlib/attribs.c use typeof instead of templates if possible.
198 - Implement partial error messages for src/filed/acl.c
199 - Fix return code to fail when doing update barcodes and
200 Pool resource is not found. This previously caused Volumes
201 to be labeled as cleaning tapes.
202 - Small updates to projects.
204 - Add Eric Bollengier patch for new RunScript directive. It breaks
205 compatibility between dird and fd.
207 - Prevent DVD code from rewriting label if the device cannot be
209 - Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
210 fix Debian build bug.
211 - Fix Dir/SD run race in migrate.c, verify.c, and restore.c
212 - Integrate manpages contributed by Jose Luis.
213 - Update projects file.
214 - Add manpages Makefile.in to configure.in
215 - Remove installation of bacula.8 in scripts directory.
217 - Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
219 O_NOATIME is a open() flag which makes it possible to read a file without
220 updating the inode atime (and also without the inode ctime update which
221 happens if you try to set the atime back to its previous value). It also
222 prevents a race condition when two programs are reading the same file, but
223 only one does not want to change the atime. It's most useful for backup
224 programs and file integrity checkers (and bacula can fit on both
227 Recent versions of the Linux kernel and glibc have support for it (the
228 glibc support being mostly copying the O_NOATIME definition to
229 bits/fcntl.h). If there's no support for it on the kernel, trying to use
230 it does nothing (since the kernel ignores unknown flags).
232 If the kernel has support for it, trying to use it either works, fails
233 silently (mostly in remote filesystems), or returns errno=EPERM (if you
234 are not either the owner of the file or root). A simple way to prevent the
235 failure is to open the file without the flag and set it later with
236 fcntl(F_SETFL), ignoring any EPERM errors.
237 - Applied patch posted by Jaime Ventura to bug #570 to correct failure
238 of restarted jobs to complete (due to a destroyed pthreads conditional
239 variable used by the message thread).
240 - Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
242 - Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
243 - Apply patch from Rudolf Cejka bug #614 to removed trailing
244 colons in query.sql file.
245 - Apply patch from Rudolf Cejka bug #613 to correct prunning of files
246 not to create orphans.
247 - Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
248 in restore long listing.
249 - Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
250 of incorrect MarkedId.
251 - Apply patch from adioso bug #616 to correct text in manual (replace
252 Director with File daemon).
253 - Rework a few of the zlib changes so that they build properly.
256 - Move DIR "run" command to SD before starting the message thread
257 as suggested by Cristopher Hull to avoid a race deadlock from
258 two threads using the bsock structure.
259 - Modify LICENSE to correct some problems pointed out by Debian.
261 - Correct EOF with no \n lex.c problem.
262 - Tweak compat.h compat.cpp and merge with apcupsd
263 - Add additional INFO messages if autochanger cannot be used.
266 - Simplify Win32 Makefile
267 - Correct count of buffers/bytes used by smartall.c
268 - Updated compat.h after porting apcupsd to MinGW.
270 - Work on getting wx-console building on MinGW. wxWidgets now builds
271 started adding Makefile ...
272 - Moved MinGW library objects to src/win32/lib to reduce clutter.
274 - Reloading a bad configuration file doesn't kill director any more.
275 Thanks to fix from Eric Bollengier.
277 - Fix problem of accents with new Win32 code.
278 - Integrate Howard's VSS patch. Tweak it a bit. VSS now
279 works in the MinGW build with the exception that there
280 is a problem with accented characters -- i.e. there is
281 some mapping problem with wide characters.
282 - The code no longer compiles with Microsoft VC++.
284 - Start implementing Christopher's St.Bernard code.
285 - Add Christopher's mods for opening files.
286 - Strip \r \n from Win32 error messages (Christopher)
287 - Add more info about Win32 system if unknown (Christopher)
288 - Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
289 - Fix a number of incorrect strings marked for translation, when
290 they should not be (e.g. commands).
291 - Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
292 Patches supplied by user in bugs #608 and #599.
293 - Use most recent of st_ctime and st_mtime in restore tree DIR
294 listing. This fixes some problems with Win32 printing incorrect
296 - Correct the clock shift comm time calculation between the DIR
297 and the FD. It was added rather than subtracted.
298 - Strip all backslashes in filenames to be restored on Win32
299 machines -- the names should all be in Unix format, and if
300 there are any backslashes it is most likely due to an improper
301 FileSet definition, and the files will not otherwise be
303 - Remove lib/regex.c (replaced by bregex.c).
304 - Delete src/win32/License.txt
305 - Modify installer to install LICENSE
307 - Fix bug in build-win32-cross-tools script reported by Howard
308 - Implement cross compiled bconsole
310 - Fix barcode test, eliminate BOOL (doesn't exist on Linux).
311 - Write first cut of README.mingw32
312 - Add back ua_label barcode fix from Rufolf Cejka.
313 - Integrate the majority of the Mingw cross-tools submission
314 made by Howard Thomson. Everything compiles, with zlib, openssl,
315 and VSS turned off. Linking needs a pthreads library ...
317 - Add 'Dir Status' button to the gnome console.
318 - More work on migration.
319 - Restore non-compatible base64 coding to permit compatibility.
320 - Display heap stats in Storage daemon without debug level.
322 - Integrate most of the MinGW changes -- more to do.
324 - Implement using pg_config for finding PostgreSQL files.
325 Fixes bug #600. Patch supplied by user.
326 - Remove -t option from mktemp in mtx_changer.in and use
327 working directory. Fixes bug #578.
328 - Update job start time after the any run before job so that
329 files created by the script are only backed up once. Fixes
331 - Strip trailing newline only from filenames entered in
332 the restore command when reading a file. This permits
333 the user to enter filenames with trailing spaces. Fixes
334 bug #549. The user supplied a patch that I modified slightly.
335 - Use the most recent time (st_mtime, st_ctime) in the dir
336 command in restore. This gives the user a better idea of what
337 the newest file really is. This fixes bug #574. The fix
338 was suggested by the user.
339 - Implement a compatible version of base64. This permits external
340 programs to duplicate Bacula's base64 algorithm using standard
341 routines. This fixes bugs #296, and 565. Patch submitted by
343 ================= Note ========================
344 Previous Signatures stored in the database are no longer
345 compatible with this. The main downside is for Verify jobs,
346 and doing an InitCatalog run will fix the problem. Also, the
347 authentication between the deamons is changed, so all daemons
348 must be simultaneously upgraded.
349 ==============================================
350 If you don't like this fix, set:
351 const bool compatible = true;
353 const bool compatible = false;
356 - Ensure that DB signature is never NULL.
357 - Ensure that DB table names are not translated.
358 - Fix scheduler to handle time skew (eg daylight savings).
359 - Fix scheduler to use lock_jobs() to avoid most problems
360 with reload. Window is now milliseconds.
362 - Apply patch from Christopher Hull
363 - Allow multiple connections to database with different
365 - Invalidate the scheduler when doing a reload. Fixes seg
366 fault, but still 60 second window.
367 - Additional info in Reschedule message.
368 - Use set_jcr_job_status() everywhere to prevent loss of
370 - Display peer IP in FD if error from connecting DIR.
371 - Don't increment file count for DIRBEGIN.
372 - Replace illegal characters in Win32 filename by _.
373 - Add SE_CREATE_PERMANENT_NAME privilege in Win32.
374 - Hash hard link filenames rather than linked list.
375 - Fix for security failure in chdir on Win32.
376 - Add CreateDirectoryA/W win32 API entry points.
377 - Add /silent option to Win32 FD for Install/Remove service.
378 - Always print Heap statistics in FD.
380 - Remove the -f option from the chown in Makefile.in for more
382 - Change setting the group in Makefile.in to use chgrp for
384 - Implement a write_store and read_store to replace
385 dirstore in reserve.c
386 - Implement a Bacula read/write lock for Python rather
387 than using the Python lock to avoid recursive problems.
388 - Correct the uninstall directory names in filed/Makefile.in
389 as reported by a user.
391 - Correct some problems with database creation (new tables).
392 - Replace a bunch of old 0x%x by %p.
393 - Get first cut of Migration with Job selection working.
395 - Change store_bit() to store_bool() for the Spooling in
396 dird_conf.c -- bug reported by Robert Nelson.
398 - Correct Makefile bug found by Dan Langille.
400 - Correct Makefile for Solaris /bin/sh
401 - Correct mtx-changer.in for Solaris /bin/sh
402 - Abort if a conf resource does not have a Name =
404 - Change the name of the regex program to bregex.
405 - Add the bwild program to the tools directory. It is similar
406 to the bregex program.
407 - Implement create bregex.h and bregex.c in src/lib from the
408 Python regexp program.
409 - Use the new bregex.c to implement Regex expressions on Win32.
411 - More work on migration.
412 - Implement wild program in tools directory for testing
413 wild-cards. Almost identical to the regex program.
414 - Up port VSS single thread locking code.
415 - Replace N_(..) by NT_(...) to inhibit translation of
417 - Modify Makefile to change the permissions on Working Directory
418 to 770 if the directory is created.
419 - Do not fail the Makefile if changing the permissions or
420 owner/group on WorkingDir fails.
421 - Remove early selection of Scratch Volumes in the recycling
423 - Correct the old recycling algorithm so that Scratch Volumes
424 are selected when looking for a Volume in the changer.
425 - Correct a typo in the Verify SQL reported by Joe Park.
427 - Remove automatic case folding on Windows FDs. You must
428 explictly use the 'Ignore Case = yes' option.
429 - Remove the code added to 1.38.6 and 1.38.7 that pulls a
430 scratch volume in an Autochanger early in the 'recycling'
433 - Make weof() and clrerror() methods of class DEVICE.
435 - Tweak license to include Microsoft restrictions.
436 - Move mysql.reconnect to after real_connect(). Thanks to
437 Frank Sweetser for the patch.
438 - Disallow a backslash in a File = directive (Windows junk)
439 unless the string is quoted.
440 - Apply Eric's patch to ua_label.c so that daemon protocol
442 - Add NT_ definition for strings that should not be translated.
443 - Apply NT_() to ua_label.c
445 - Remove timed wait for VSS on Win2K3 as it is not yet
447 - Correct bacula.in script to reference bacula-ctl-xx in the
448 sysconfig directory rather than the bin directory.
450 - Fix a long standing bug in the bacula start/stop scripts.
451 - Attempt to add the new bacula-ctl-* files to the rpm.
452 - Switch to using typeof() for list traversing to avoid
453 as many FC5 g++ compiler warnings as possible.
455 - Split the bacula start/start script into four files:
456 bacula -- starts and stops calling other scripts
457 bacula-ctl-dir -- starts/stops the director
458 bacula-ctl-fd -- starts/stops the File daemon
459 bacula-ctl-sd -- starts/stops the Storage daemon
461 - Create datestyle fix for PostgreSQL. Fixes bug #574.
462 - Correct editing of JobId from int to int64 in fd_cmds.c
463 - Eliminate FileSet name race with bash_spaces() and multiple
464 threads by bashing in a local.
465 - Fix error return from 'use storage' to print a correct error
466 message rather than nothing.
467 - Correct false re-read last block error message when two jobs
468 are simultaneously writing at the end of a tape.
469 - Simplify exit conditions in the reserve.c code to avoid
470 possible non-release of reservation_lock().
471 - Suffle lock order in reserve to avoid deadlock between
472 reservation lock and device mutex.
474 - Initialize jcr mutex before first use. Thanks to Thorsten for
475 tracking this down for me !!!! as it broke the Win32 build.
477 - Integrate addition of line count limitation to bsmtp -l from
478 Sebastian Stark <stark at tuebingen.mpg.de>
480 - Implement regex test program in tools directory.
481 - Attempt to fix time problem with bsmtp with foreign langs.
482 - Add strip_trailing_newline() submitted by user.
483 - Implement regex matching in migrate.c
485 - Fix bug #537 to allow arbitrary time to mount a volume for
486 restore, if polling is turned on.
487 - If dir_user or dir-group is specified in ./configure apply it to
488 the working-dir. Fixes bug #533.
489 - If rescheduling a job cancel the previous incarnation with the SD.
490 Fixes bugs #566 and 557.
491 - Fix bug #567 do_message() definition type conflict.
494 - Add more jcr methods and make mutex and use_count private.
495 - Create lock/unlock methods for jcr.
496 - Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
497 records to get to seek position.
498 - Integrate patch from bug #561 to correct conio.c signal definitions.
499 - Fix Rescheduling failed Jobs. Ensure that SD message thread
500 terminates correctly by doing pthread_kill(). Do not destroy
501 SD cond wait variable between executions of the job. Use local
502 mutex for cond variable to avoid blocking jcr chain. Fix poor
503 use of jcr use count in jobq.c for restarted jobs.
504 - Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
505 lib/jcr.c -- prevents locking the jcr chaing.
506 - Apply patch from bug #564, which corrects listing volumes with
507 multiple autochangers. Apply same fix to next volume list.
508 - Fix bug #562 where restore bootstrap file is not unique.
509 - More details in implementing David's migration syntax proposal.
510 - Save and restore dcr when swapping drives so that if we have
511 a write dcr it is not lost.
512 - Use new routine lock_reservations() to lock the reservations
513 system, and call it while looking for a volume in askdir.c.
514 This could possibly fix bug #543.
515 - Stop SD command loop if job is canceled.
518 - Remove old code from findlib/create_file.c
519 - Rename mac.c migrate.c
520 - Add user friendly display of VolBytes in job report.
521 - Rename target... to previous... to make it a bit easier to
523 - Add selection type and selection pattern to Migration (idea
524 given by David Boyes).
527 - The po files should now be current.
528 - Fix new sql_use_result() code to properly release the
529 buffers in all cases.
530 - Use the keyword ujobid to mean the unique job id; job or jobname
531 to mean the Job name given on the Name directive, and jobid to
532 be the numeric (non-unique) job id.
533 - Allow listing by any of the above.
534 - Add the user friendly job report code for reporting job elapsed time
535 and rates with suffexes from John Kodis <kodis at comcast.net>.
536 - Add Priority and JobLevel as Python settable items.
537 - Use TEMPORARY table creation where the table is created by
539 - Add new code submitted by Eric for waiting on specific jobid.
540 - Add ACL checking for the dot commands.
541 - Fix restore of writable FIFOs.
542 - Fix a bug in bpipe where the string was freed too early.
544 - Modify the Python class examples to inherit object -- new way
545 of defining classes. Patch from Felix Schwarz.
546 - Implement jobuid to replace old usage of job in keywords as
547 suggested by Eric Bollengier.
548 - Apply patch for enhancing wait from Eric Bollengier. On can now:
549 wait (wait for all jobs to stop)
551 wait jobuid=unique id
553 - Implement write variables for Python to set Priority (anytime), and
554 Job Level, only during JobInit event.
556 - Fix the block listing bug pointed out by Arno.
557 - Update the po files at Eric's request.
559 - Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
560 accept time qualifiers.
561 - Make catalog respect ACL.
562 - Add recycle count to Media record.
564 Changes to 1.39.6-beta1 24Feb04
566 - Add Rudolf Cejka's new rc-chio-changer.
567 - Implement pulling Volume from Scratch Pool if the
568 Volume is in the autochanger.
569 - Implement additional command arguments for update Volume.
573 - Back port changes to 1.38.5
574 - Fix recycle SQL for StorageId.
575 - Fix misplaced quote in mtx-changer script.
577 - Note. Your database must be updated, or you must create
578 a new database. I have not yet incremented the database level.
579 - Add Location table.
580 - Add LocationId, DeviceId, and MediaTypeId to Media record.
582 - Implement create/get mac record in database for adding extended
583 Migration data to the job record.
584 - Add new MAC table to update/make database scripts.
585 - Return Storage name used when getting VolumeNames for a job.
586 - Change bsr file keyword Storage to Device, which is more accurate.
587 - Ensure that Mac records are pruned/purged.
588 - Tweak SD tools to deal with changing media type.
589 - Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
590 - Pass pointer to dcr pointer to acquire_device_for_read() so
591 that the subroutine can switch devices, and hence dcrs.
592 - Modify the multiple MediaType read code to re-use the same
593 dcr when switching devices. This makes the code much more
595 - Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
596 from a table for restore.
597 - Add Storage name to VolParams, but it really should be Device.
599 - Add disk-changer to scripts directory + configure/Makefile
600 - Eliminate PoolId from jcr -- it is in jcr->jr.PoolId
601 - Implement store_bit scanner to replace store_yesno. Mostly done.
602 - Implement new store_bool that stores in a bool.
603 - Add true/false to yes/no conf directives.
604 - Make first cut at changing appropriate store_yesno to store_bool.
605 - Complete implementation of Pool storage devices.
606 - Move starting clones to job.c
607 - Move create_restore_bootstrap_file() to job.c
608 - Make copy_storage() more general to be able to handle
610 - Cleanup a lot of migration code for manual running, including
612 - Move getting a scratch Volume into a subroutine.
613 - Make all places a Volume that is added to a pool to
615 - Fix bug in autochanger recycle code (improper edit 64 bit).
616 - Fix segfault in restore command when no value specified.
617 - Start adding code to handle multiple MediaTypes in restore.
618 - Eliminate race condition in getting Volume name for
619 two drive autochanger.
620 - More debug code in autochanger.
621 - Add storage keyword to bootstrap file, add parsing.
622 - Move slot in bsr file into Volume record as there will be
623 a different slot for each Volume.
626 - Implement Pool storage overrides.
628 - Implement first cut of Migration.
629 - Implement mysql_use_result() from patch by Karl Hakimian.
630 This reduces significantly the memory consumption during
631 the restore tree building, and hence runs faster too.
632 - Implement StorageId patch supplied by user (reggie) in bug
633 #536. This should permit Bacula to work correctly with two
635 - Implement Job listing variations suggested by a user.
636 - Move updating bootstrap code in backup.c to subroutine
637 update_bootstrap_file().
638 - Add new job status elapsed time and bytes written user
639 friendly job report output patch sent by John Kodis
640 <kodis at comcast.ne>.
641 - Implement a storage list in Pools.
642 - Separate out setup_job() code from run_job().
643 - Get migration working -- lots of changes in mac.c in both
645 - Apply patch from user (Eric Bollengier I think) that fixes a
646 DIR crash when no arguments are supplied to a dot command.
647 - Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
648 - Fix command arg name->volume in label command of gnome-console.
649 - Fix SD acquire.c to release correct DCR by explicitly testing
650 on the dcr address rather than trying to devine if it is a read
651 or write dcr. This failed in error conditions when the device was
655 - Apply user supplied patch for more readable rate output
657 - Continue implementing migration.
658 - Implement support for removable filesystems in SD.
659 - Ensure that btraceback scripts can be read by anyone.
660 - Replace dvd-freespace and dvd-writepart by dvd-handler.
661 - Correct bug where canceling restore before the FD contacts
662 the SD causes the drive to be left in read mode.
663 - Move ofline_or_rewind into DEVICE::close().
664 - Eliminate close_device.
665 - Convert several dev subroutines to methods (e.g. bsf,
667 - Eliminate force_close_device().
668 - Implement Device Type directive in Device resource that
669 can have values File, Tape, Fifo, DVD, or Prog.
670 - Add has_cap() method to Device.
673 - Add patch from bug #527 to allow RedHat user to specify
674 options/user/group for starting each daemon in
677 - Add two new queries to query.sql provided by Arno. One
678 list volumes known to the Storage device, and the other
679 lists volumes possibly needing replacement (error, ...).
681 - Add periodic (every 24 hours) garbage collection of memory
682 pool by releasing free buffers.
684 - Correct bug counting sized (for display only) in smartall.c
685 - Print FD mempool stats if debug > 0 rather than 5.
687 - Make db_lock() mutex error fail the job rather than abort
688 Bacula. Canceling the job caused the mutex to fail.
689 - Correct bug in alist.c that re-allocated the list if the
690 number of items goes to zero.
691 - Move the reservation system thread locking to the top level
692 so that one job at a time tries all possible drives before
694 - Implement a reservation 'fail' message queue that is built
695 and destroyed on each pass through the reservation system.
696 These messages are displayed in a 'Jobs waiting to reserve
697 a drive' list during a 'status storage='. Note, multiple
698 messages will generally print for each JobId because they
699 represent the different problems with either the same drive
700 or different drives. If this output proves too confusing
701 of voluminous, I will display it only when debug level 1
702 or greater is enabled in the SD.
704 - Add enable/disable job=<job-name>. This command prevents
705 the specified job from being scheduled. Even when disabled,
706 the job can be manually started from the console.
707 - During 'update slots' clear all InChanger flags where the
708 StorageId is zero (old Media records).
712 - Fix autochanger code to strip leading spaces from returned
713 slots number. Remove bc from chio-changer.
714 - Back port a bit of 1.39 crypto code to reduce diffs.
715 - Fix first call to autochanger that missed close()ing the
716 drive. Put close() just before each run_program(). Fixes
719 - Add PoolId to Job record when updating it at job start time.
721 - Pull in more code from 1.39 so that there are fewer file
722 differences (the new ua_dotcmds.c, base64.h, crypto.h
723 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
724 util.c. Aside from ua_dotcmds.c these are mostly crypto
726 - Implement new method of walking the jcr chain. The
727 incr/dec of the use_count is done within the walking
728 routines. This should prevent a jcr from being freed
729 from under the walk routines.
734 - Start implementing Verify list output.
735 - Move the suitable_drive flag to a better place to prevent
736 premature termination of the reservation if all drives
737 are busy -- should fix Arno's diff/inc pool failures.
739 - Add mutex to single thread VSS code in Win32.
741 - Simplify code in askdir.c that waits for creating an appendable
742 volume so that it can handle multiple returns from the wait
744 - Modify the wait code to permit multiple returns.
745 - Return a zero when "autochanger drives" is called and
746 it is not an autochanger.
747 - Make rewind_dev() a method taking a DCR as an argument.
748 This permits closing and reopening the drive if the
749 rewind fails as happens if the drive was loaded while the
750 file descriptor was open. This refreshes the file descriptor.
751 - Remove the ST_OPENED flag and always rely on fd < 0 for knowing
752 if the device is open or not. This should eliminate
754 - Return error if reserve cannot find at least one suitable device.
755 - Make wait_for_sysop() return correct state information.
756 - Fix Win32 state file problem. write was not using compat
757 code. This should fix bug #500.
759 - Modify gui on command to set only GUI mode and not batch.
760 - Modify .messages command to always print messages regardless
762 - If GUI mode is on, suppress automatic printing of
764 - Delete old bnet packet code.
765 - Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
767 - Modify restore command in wx-console to set gui on and to use
768 only .messages instead of messages. Hopefully this fixes bug
770 - Fix seg fault in exit of acquire when canceling a job --
771 reported by Wolfgang Denk
772 - Pull in latest reservation system changes from 1.38
773 - Make .messages command always print messages regardless
774 of the automessages flag.
776 - Fix seg fault if user labels a drive directory bug #513
777 - Remove quotes around Version as it breaks things.
779 - Merge in Aleksandar Milivojevic's mods to the spec file.
780 - Apply sparse code fix for raw drives and fifos. Bug 506
781 - Thorsten fixed Unicode cd problem with wx-console bug 505.
783 - Correct reservation system to do a last ditch try
784 for any mounted volume, then anyone anywhere.
785 - Add quotes around table Version because of
786 error in MySQL 4.1.15 -- bug report submitted.
787 - Correct some minor problems with btape in the fill
789 - Updates to ssh-tunnel from Joshua Kugler.
790 - Added a report.pl program from Jonas Bjorklund.
791 - Simplify the O_NONBLOCK open() code for tape drives,
792 and always open nonblocking.
793 - Do not wait for open() if EIO returned (shouldn't happen).
794 - Eliminate 3 argument to tape open().
795 - Correct the slot # edited in the 3995 Bad autochanger unload
797 - With -S on bscan (show progress) do not divide by zero.
799 - Make cancel pthread_cond_signal() pthread_cond_broadcast().
800 - When dcr is freed, also broadcast dev->wait_next_vol signal.
801 - Remove unused code in wait_for_device.
802 - Make wait_for_device() always return after 60 seconds of wait.
806 - Add stubs for non-crypto build.
808 - Use localhost if no network configured
810 - Eliminated duplicate MaxVolBytes in cat update -- bug 509.
811 - Remove debug print.
812 - Add bail_out in error during state file reading.
814 - Merge changes made to 1.38.3 into HEAD
815 - Add stubs for pygtk-console code
816 - Create Makefile.in for pygtk-console code
818 - Merge updates into 1.38 branch
819 - Update specs to include mysql4 define.
820 - Fix when attributes are sent, must be after binit().
821 - Stop read_record() if status not ok in second loop.
822 - Return rec->FileIndex in dcr->VolLastIndex for normal
823 and partial records in read_record(). This allows bscan
824 to get FileIndex at EOT correct.
825 - Fix butil.c to correctly set dcr -- fixes seg fault in bls.
827 - Fix Win32 built to work with new crypto code.
828 - Apply patch supplied by user (slightly modified) to fix
829 correct detection of holes in block devices and FIFOs.
831 - Apply patch supplied by user (slightly modified)
832 to fix SD hang with multiple pools and bad client
835 - Add nagios plugin to the examples directory. Submitted by
837 - Remove warning message about multiple saves of hardlinked files
838 from find_one.c as it can generate too many warning messages.
839 - Modify most restore error messages to be queued so that they
840 appear at the end of the job rather than mixted with the restore
841 listing where they could be "lost".
843 - Reset timeout values before select() per patch from
844 Frank Sweetser for problems with non-blocking sockets.
845 - Unlink the state file if either reading or writing it gets
846 errors. Hopefully this will fix Win32 exit problems.
847 - Add sanity check in append.c to ensure that dcr is not NULL.
848 This can happen if multiple drive autochanger SCSI control
849 channel and drive indicies do not correspond.
851 - Get next volume from Scratch pool before creating a volume.
852 - Set new Pool defaults in Vol when moved from Scratch Pool.
853 - Remove argument from create_bacula_database for SQLite as it
855 - Add back index code so that two drive autochangers can get
857 - Change a bunch of debug levels to aid debugging autochangers.
858 - Fix reservation so that mutexes are properly applied.
859 - Rework reservation algorithm so that two drives can be used
862 - Landon merged his data encription changes into the HEAD
863 - Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
864 If this patch is applied, the number of days can be specified with
865 "list nextvol days=xx"
868 My use case is to be able to preview the next scheduled job (and the
869 next tape to be used) on fridays if there are no scheduled jobs during
873 - Fix font code in gnome2 console user patch. Fixes bug #501.
874 - Fix malformatted bnet error message that caused seg fault
876 - Applied user patch to improve README.vc8 in src/win32.
878 - Add Migrate, Copy, Archive Job types (some where there)
879 - Correct some more editing of JobId's (for 64 bit compatibility).
880 - Ensure that StorageId is stored in Media record when ever possible.
881 - Add Migration Job to Job.
882 - Add Migration Time, Migration High Bytes, Migration Low Bytes
883 Next Pool to Pool resource.
884 - Add more code to mac.c (migration archive copy).
885 - Change Start Storage daemon job to require read and write storage
887 - Pass read storage data to SD as well as write storage data.
888 - Remove old code from winservice.cpp
889 - Break on error in scan.
890 - Fix typo in signal.c
891 - Separate read/write DCR in SD. Add jcr->read_dcr.
892 - Cleanup how find_device() works.
893 - Add read output to Status in SD.
896 - Add red-black btree routines
898 - Remove abs() in bfile.c so that it compiles on Solaris.
901 - Fix crash in tray-monitor when daemon disconnects. Bug #479.
902 - Fix bnet-server bug found on OpenBSD. Bug #486
903 - Fix cancel failure bug. Bug #481
904 - Fix failure when Pool name has spaces. Bug #487
905 - Fix SD crash in autochanger code. Mutex failure. Bug #488
906 - Fix a couple of free()s in src/filed/acl.c
907 - Fix memory overrun in bfile.c in building OS X resource
908 fork filename. Bug #489
909 - Add Pool name to SD status output.
911 - Apply SunOS patch for ACLs submitted by David Duchscher.
912 - Make sure to set storage before trying to set drive.
913 - Add bacula_mail_summary.sh to examples directory. It makes
914 a single email summary of any number of jobs. Submitted
916 - Make sure when we do a mount to unblock the device even
917 if the drive could not be opened.
919 - Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
920 and correct a few minor problems to make it build on Linux.
922 - Remove delete of CVS from all Makefiles
923 - Fix seg fault when clicking on Add button in wx-console
924 restore panel. Bug #470.
925 - Fix copyright date and URL typo -- bug #468.
926 - Change autostart install for FreeBSD to look for rc.conf
927 rather than rc.local as suggested fix for bug #466.
928 - Apply patch supplied by Eric Bollengier to fix PostgreSQL
929 grant on status. Bug #465
930 - Apply patch supplied by Eric Bollengier to fix PostgreSQL
931 update script. Bug #464
932 - Tweak #ifdefing a bit in new Win32 stream code.
933 - Fix #ifdeffing for FD_NO_SEND_TEST.
934 - Add documentation of performance #defines