1 Technical notes on version 1.39
6 - Update some very old licenses in src/cats.
7 - Modify the database format for handling Migration jobs:
8 Add PriorJobId, RealEndTime to Job table
10 Remove Stripe from JobMedia record (not used, wasting space)
11 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
12 Add Cost to Location table.
13 - Delete mac_record subroutines.
14 - Add new table values to create/update/get routines as appropriate.
15 - Update the update_tables and make_tables scripts.
16 - Make a first cut in using a union where multiple pointers (actually
17 pointers to pointers) are stored.
18 - Make some changes to base64.c suggested by Robert and others and add
19 a small amount of documentation.
20 - Add some changes suggested by Peter for Solaris (bregex...)
21 - Make runscript.h always built because it needs to be pulled into
22 more places. In particular its RES was left out of a union.
23 - Renumber the enum{} list in runscript.h to avoid starting from zero.
24 This makes it slightly easier to detect uninitialized variables.
26 - Remove xpg4 lib from FreeBSD build as it is no longer needed and
27 sometimes creates install problems.
28 - Change a couple of %T in strftime to %H:%M:%S as seen in Robert
29 Nelson's code. More to do.
30 - Convert a few store_bit to store_bool in filed_conf.c.
31 - DVD tweak to block.c as supplied by Uwe Muessel.
33 - Modify configure.in to check for typeof().
34 - In findlib/attribs.c use typeof instead of templates if possible.
36 - Implement partial error messages for src/filed/acl.c
37 - Fix return code to fail when doing update barcodes and
38 Pool resource is not found. This previously caused Volumes
39 to be labeled as cleaning tapes.
40 - Small updates to projects.
42 - Add Eric Bollengier patch for new RunScript directive. It breaks
43 compatibility between dird and fd.
45 - Prevent DVD code from rewriting label if the device cannot be
47 - Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
49 - Fix Dir/SD run race in migrate.c, verify.c, and restore.c
50 - Integrate manpages contributed by Jose Luis.
51 - Update projects file.
52 - Add manpages Makefile.in to configure.in
53 - Remove installation of bacula.8 in scripts directory.
55 - Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
57 O_NOATIME is a open() flag which makes it possible to read a file without
58 updating the inode atime (and also without the inode ctime update which
59 happens if you try to set the atime back to its previous value). It also
60 prevents a race condition when two programs are reading the same file, but
61 only one does not want to change the atime. It's most useful for backup
62 programs and file integrity checkers (and bacula can fit on both
65 Recent versions of the Linux kernel and glibc have support for it (the
66 glibc support being mostly copying the O_NOATIME definition to
67 bits/fcntl.h). If there's no support for it on the kernel, trying to use
68 it does nothing (since the kernel ignores unknown flags).
70 If the kernel has support for it, trying to use it either works, fails
71 silently (mostly in remote filesystems), or returns errno=EPERM (if you
72 are not either the owner of the file or root). A simple way to prevent the
73 failure is to open the file without the flag and set it later with
74 fcntl(F_SETFL), ignoring any EPERM errors.
75 - Applied patch posted by Jaime Ventura to bug #570 to correct failure
76 of restarted jobs to complete (due to a destroyed pthreads conditional
77 variable used by the message thread).
78 - Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
80 - Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
81 - Apply patch from Rudolf Cejka bug #614 to removed trailing
82 colons in query.sql file.
83 - Apply patch from Rudolf Cejka bug #613 to correct prunning of files
84 not to create orphans.
85 - Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
86 in restore long listing.
87 - Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
88 of incorrect MarkedId.
89 - Apply patch from adioso bug #616 to correct text in manual (replace
90 Director with File daemon).
91 - Rework a few of the zlib changes so that they build properly.
94 - Move DIR "run" command to SD before starting the message thread
95 as suggested by Cristopher Hull to avoid a race deadlock from
96 two threads using the bsock structure.
97 - Modify LICENSE to correct some problems pointed out by Debian.
99 - Correct EOF with no \n lex.c problem.
100 - Tweak compat.h compat.cpp and merge with apcupsd
101 - Add additional INFO messages if autochanger cannot be used.
104 - Simplify Win32 Makefile
105 - Correct count of buffers/bytes used by smartall.c
106 - Updated compat.h after porting apcupsd to MinGW.
108 - Work on getting wx-console building on MinGW. wxWidgets now builds
109 started adding Makefile ...
110 - Moved MinGW library objects to src/win32/lib to reduce clutter.
112 - Reloading a bad configuration file doesn't kill director any more.
113 Thanks to fix from Eric Bollengier.
115 - Fix problem of accents with new Win32 code.
116 - Integrate Howard's VSS patch. Tweak it a bit. VSS now
117 works in the MinGW build with the exception that there
118 is a problem with accented characters -- i.e. there is
119 some mapping problem with wide characters.
120 - The code no longer compiles with Microsoft VC++.
122 - Start implementing Christopher's St.Bernard code.
123 - Add Christopher's mods for opening files.
124 - Strip \r \n from Win32 error messages (Christopher)
125 - Add more info about Win32 system if unknown (Christopher)
126 - Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
127 - Fix a number of incorrect strings marked for translation, when
128 they should not be (e.g. commands).
129 - Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
130 Patches supplied by user in bugs #608 and #599.
131 - Use most recent of st_ctime and st_mtime in restore tree DIR
132 listing. This fixes some problems with Win32 printing incorrect
134 - Correct the clock shift comm time calculation between the DIR
135 and the FD. It was added rather than subtracted.
136 - Strip all backslashes in filenames to be restored on Win32
137 machines -- the names should all be in Unix format, and if
138 there are any backslashes it is most likely due to an improper
139 FileSet definition, and the files will not otherwise be
141 - Remove lib/regex.c (replaced by bregex.c).
142 - Delete src/win32/License.txt
143 - Modify installer to install LICENSE
145 - Fix bug in build-win32-cross-tools script reported by Howard
146 - Implement cross compiled bconsole
148 - Fix barcode test, eliminate BOOL (doesn't exist on Linux).
149 - Write first cut of README.mingw32
150 - Add back ua_label barcode fix from Rufolf Cejka.
151 - Integrate the majority of the Mingw cross-tools submission
152 made by Howard Thomson. Everything compiles, with zlib, openssl,
153 and VSS turned off. Linking needs a pthreads library ...
155 - Add 'Dir Status' button to the gnome console.
156 - More work on migration.
157 - Restore non-compatible base64 coding to permit compatibility.
158 - Display heap stats in Storage daemon without debug level.
160 - Integrate most of the MinGW changes -- more to do.
162 - Implement using pg_config for finding PostgreSQL files.
163 Fixes bug #600. Patch supplied by user.
164 - Remove -t option from mktemp in mtx_changer.in and use
165 working directory. Fixes bug #578.
166 - Update job start time after the any run before job so that
167 files created by the script are only backed up once. Fixes
169 - Strip trailing newline only from filenames entered in
170 the restore command when reading a file. This permits
171 the user to enter filenames with trailing spaces. Fixes
172 bug #549. The user supplied a patch that I modified slightly.
173 - Use the most recent time (st_mtime, st_ctime) in the dir
174 command in restore. This gives the user a better idea of what
175 the newest file really is. This fixes bug #574. The fix
176 was suggested by the user.
177 - Implement a compatible version of base64. This permits external
178 programs to duplicate Bacula's base64 algorithm using standard
179 routines. This fixes bugs #296, and 565. Patch submitted by
181 ================= Note ========================
182 Previous Signatures stored in the database are no longer
183 compatible with this. The main downside is for Verify jobs,
184 and doing an InitCatalog run will fix the problem. Also, the
185 authentication between the deamons is changed, so all daemons
186 must be simultaneously upgraded.
187 ==============================================
188 If you don't like this fix, set:
189 const bool compatible = true;
191 const bool compatible = false;
194 - Ensure that DB signature is never NULL.
195 - Ensure that DB table names are not translated.
196 - Fix scheduler to handle time skew (eg daylight savings).
197 - Fix scheduler to use lock_jobs() to avoid most problems
198 with reload. Window is now milliseconds.
200 - Apply patch from Christopher Hull
201 - Allow multiple connections to database with different
203 - Invalidate the scheduler when doing a reload. Fixes seg
204 fault, but still 60 second window.
205 - Additional info in Reschedule message.
206 - Use set_jcr_job_status() everywhere to prevent loss of
208 - Display peer IP in FD if error from connecting DIR.
209 - Don't increment file count for DIRBEGIN.
210 - Replace illegal characters in Win32 filename by _.
211 - Add SE_CREATE_PERMANENT_NAME privilege in Win32.
212 - Hash hard link filenames rather than linked list.
213 - Fix for security failure in chdir on Win32.
214 - Add CreateDirectoryA/W win32 API entry points.
215 - Add /silent option to Win32 FD for Install/Remove service.
216 - Always print Heap statistics in FD.
218 - Remove the -f option from the chown in Makefile.in for more
220 - Change setting the group in Makefile.in to use chgrp for
222 - Implement a write_store and read_store to replace
223 dirstore in reserve.c
224 - Implement a Bacula read/write lock for Python rather
225 than using the Python lock to avoid recursive problems.
226 - Correct the uninstall directory names in filed/Makefile.in
227 as reported by a user.
229 - Correct some problems with database creation (new tables).
230 - Replace a bunch of old 0x%x by %p.
231 - Get first cut of Migration with Job selection working.
233 - Change store_bit() to store_bool() for the Spooling in
234 dird_conf.c -- bug reported by Robert Nelson.
236 - Correct Makefile bug found by Dan Langille.
238 - Correct Makefile for Solaris /bin/sh
239 - Correct mtx-changer.in for Solaris /bin/sh
240 - Abort if a conf resource does not have a Name =
242 - Change the name of the regex program to bregex.
243 - Add the bwild program to the tools directory. It is similar
244 to the bregex program.
245 - Implement create bregex.h and bregex.c in src/lib from the
246 Python regexp program.
247 - Use the new bregex.c to implement Regex expressions on Win32.
249 - More work on migration.
250 - Implement wild program in tools directory for testing
251 wild-cards. Almost identical to the regex program.
252 - Up port VSS single thread locking code.
253 - Replace N_(..) by NT_(...) to inhibit translation of
255 - Modify Makefile to change the permissions on Working Directory
256 to 770 if the directory is created.
257 - Do not fail the Makefile if changing the permissions or
258 owner/group on WorkingDir fails.
259 - Remove early selection of Scratch Volumes in the recycling
261 - Correct the old recycling algorithm so that Scratch Volumes
262 are selected when looking for a Volume in the changer.
263 - Correct a typo in the Verify SQL reported by Joe Park.
265 - Remove automatic case folding on Windows FDs. You must
266 explictly use the 'Ignore Case = yes' option.
267 - Remove the code added to 1.38.6 and 1.38.7 that pulls a
268 scratch volume in an Autochanger early in the 'recycling'
271 - Make weof() and clrerror() methods of class DEVICE.
273 - Tweak license to include Microsoft restrictions.
274 - Move mysql.reconnect to after real_connect(). Thanks to
275 Frank Sweetser for the patch.
276 - Disallow a backslash in a File = directive (Windows junk)
277 unless the string is quoted.
278 - Apply Eric's patch to ua_label.c so that daemon protocol
280 - Add NT_ definition for strings that should not be translated.
281 - Apply NT_() to ua_label.c
283 - Remove timed wait for VSS on Win2K3 as it is not yet
285 - Correct bacula.in script to reference bacula-ctl-xx in the
286 sysconfig directory rather than the bin directory.
288 - Fix a long standing bug in the bacula start/stop scripts.
289 - Attempt to add the new bacula-ctl-* files to the rpm.
290 - Switch to using typeof() for list traversing to avoid
291 as many FC5 g++ compiler warnings as possible.
293 - Split the bacula start/start script into four files:
294 bacula -- starts and stops calling other scripts
295 bacula-ctl-dir -- starts/stops the director
296 bacula-ctl-fd -- starts/stops the File daemon
297 bacula-ctl-sd -- starts/stops the Storage daemon
299 - Create datestyle fix for PostgreSQL. Fixes bug #574.
300 - Correct editing of JobId from int to int64 in fd_cmds.c
301 - Eliminate FileSet name race with bash_spaces() and multiple
302 threads by bashing in a local.
303 - Fix error return from 'use storage' to print a correct error
304 message rather than nothing.
305 - Correct false re-read last block error message when two jobs
306 are simultaneously writing at the end of a tape.
307 - Simplify exit conditions in the reserve.c code to avoid
308 possible non-release of reservation_lock().
309 - Suffle lock order in reserve to avoid deadlock between
310 reservation lock and device mutex.
312 - Initialize jcr mutex before first use. Thanks to Thorsten for
313 tracking this down for me !!!! as it broke the Win32 build.
315 - Integrate addition of line count limitation to bsmtp -l from
316 Sebastian Stark <stark at tuebingen.mpg.de>
318 - Implement regex test program in tools directory.
319 - Attempt to fix time problem with bsmtp with foreign langs.
320 - Add strip_trailing_newline() submitted by user.
321 - Implement regex matching in migrate.c
323 - Fix bug #537 to allow arbitrary time to mount a volume for
324 restore, if polling is turned on.
325 - If dir_user or dir-group is specified in ./configure apply it to
326 the working-dir. Fixes bug #533.
327 - If rescheduling a job cancel the previous incarnation with the SD.
328 Fixes bugs #566 and 557.
329 - Fix bug #567 do_message() definition type conflict.
332 - Add more jcr methods and make mutex and use_count private.
333 - Create lock/unlock methods for jcr.
334 - Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
335 records to get to seek position.
336 - Integrate patch from bug #561 to correct conio.c signal definitions.
337 - Fix Rescheduling failed Jobs. Ensure that SD message thread
338 terminates correctly by doing pthread_kill(). Do not destroy
339 SD cond wait variable between executions of the job. Use local
340 mutex for cond variable to avoid blocking jcr chain. Fix poor
341 use of jcr use count in jobq.c for restarted jobs.
342 - Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
343 lib/jcr.c -- prevents locking the jcr chaing.
344 - Apply patch from bug #564, which corrects listing volumes with
345 multiple autochangers. Apply same fix to next volume list.
346 - Fix bug #562 where restore bootstrap file is not unique.
347 - More details in implementing David's migration syntax proposal.
348 - Save and restore dcr when swapping drives so that if we have
349 a write dcr it is not lost.
350 - Use new routine lock_reservations() to lock the reservations
351 system, and call it while looking for a volume in askdir.c.
352 This could possibly fix bug #543.
353 - Stop SD command loop if job is canceled.
356 - Remove old code from findlib/create_file.c
357 - Rename mac.c migrate.c
358 - Add user friendly display of VolBytes in job report.
359 - Rename target... to previous... to make it a bit easier to
361 - Add selection type and selection pattern to Migration (idea
362 given by David Boyes).
365 - The po files should now be current.
366 - Fix new sql_use_result() code to properly release the
367 buffers in all cases.
368 - Use the keyword ujobid to mean the unique job id; job or jobname
369 to mean the Job name given on the Name directive, and jobid to
370 be the numeric (non-unique) job id.
371 - Allow listing by any of the above.
372 - Add the user friendly job report code for reporting job elapsed time
373 and rates with suffexes from John Kodis <kodis at comcast.net>.
374 - Add Priority and JobLevel as Python settable items.
375 - Use TEMPORARY table creation where the table is created by
377 - Add new code submitted by Eric for waiting on specific jobid.
378 - Add ACL checking for the dot commands.
379 - Fix restore of writable FIFOs.
380 - Fix a bug in bpipe where the string was freed too early.
382 - Modify the Python class examples to inherit object -- new way
383 of defining classes. Patch from Felix Schwarz.
384 - Implement jobuid to replace old usage of job in keywords as
385 suggested by Eric Bollengier.
386 - Apply patch for enhancing wait from Eric Bollengier. On can now:
387 wait (wait for all jobs to stop)
389 wait jobuid=unique id
391 - Implement write variables for Python to set Priority (anytime), and
392 Job Level, only during JobInit event.
394 - Fix the block listing bug pointed out by Arno.
395 - Update the po files at Eric's request.
397 - Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
398 accept time qualifiers.
399 - Make catalog respect ACL.
400 - Add recycle count to Media record.
402 Changes to 1.39.6-beta1 24Feb04
404 - Add Rudolf Cejka's new rc-chio-changer.
405 - Implement pulling Volume from Scratch Pool if the
406 Volume is in the autochanger.
407 - Implement additional command arguments for update Volume.
411 - Back port changes to 1.38.5
412 - Fix recycle SQL for StorageId.
413 - Fix misplaced quote in mtx-changer script.
415 - Note. Your database must be updated, or you must create
416 a new database. I have not yet incremented the database level.
417 - Add Location table.
418 - Add LocationId, DeviceId, and MediaTypeId to Media record.
420 - Implement create/get mac record in database for adding extended
421 Migration data to the job record.
422 - Add new MAC table to update/make database scripts.
423 - Return Storage name used when getting VolumeNames for a job.
424 - Change bsr file keyword Storage to Device, which is more accurate.
425 - Ensure that Mac records are pruned/purged.
426 - Tweak SD tools to deal with changing media type.
427 - Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
428 - Pass pointer to dcr pointer to acquire_device_for_read() so
429 that the subroutine can switch devices, and hence dcrs.
430 - Modify the multiple MediaType read code to re-use the same
431 dcr when switching devices. This makes the code much more
433 - Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
434 from a table for restore.
435 - Add Storage name to VolParams, but it really should be Device.
437 - Add disk-changer to scripts directory + configure/Makefile
438 - Eliminate PoolId from jcr -- it is in jcr->jr.PoolId
439 - Implement store_bit scanner to replace store_yesno. Mostly done.
440 - Implement new store_bool that stores in a bool.
441 - Add true/false to yes/no conf directives.
442 - Make first cut at changing appropriate store_yesno to store_bool.
443 - Complete implementation of Pool storage devices.
444 - Move starting clones to job.c
445 - Move create_restore_bootstrap_file() to job.c
446 - Make copy_storage() more general to be able to handle
448 - Cleanup a lot of migration code for manual running, including
450 - Move getting a scratch Volume into a subroutine.
451 - Make all places a Volume that is added to a pool to
453 - Fix bug in autochanger recycle code (improper edit 64 bit).
454 - Fix segfault in restore command when no value specified.
455 - Start adding code to handle multiple MediaTypes in restore.
456 - Eliminate race condition in getting Volume name for
457 two drive autochanger.
458 - More debug code in autochanger.
459 - Add storage keyword to bootstrap file, add parsing.
460 - Move slot in bsr file into Volume record as there will be
461 a different slot for each Volume.
464 - Implement Pool storage overrides.
466 - Implement first cut of Migration.
467 - Implement mysql_use_result() from patch by Karl Hakimian.
468 This reduces significantly the memory consumption during
469 the restore tree building, and hence runs faster too.
470 - Implement StorageId patch supplied by user (reggie) in bug
471 #536. This should permit Bacula to work correctly with two
473 - Implement Job listing variations suggested by a user.
474 - Move updating bootstrap code in backup.c to subroutine
475 update_bootstrap_file().
476 - Add new job status elapsed time and bytes written user
477 friendly job report output patch sent by John Kodis
478 <kodis at comcast.ne>.
479 - Implement a storage list in Pools.
480 - Separate out setup_job() code from run_job().
481 - Get migration working -- lots of changes in mac.c in both
483 - Apply patch from user (Eric Bollengier I think) that fixes a
484 DIR crash when no arguments are supplied to a dot command.
485 - Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
486 - Fix command arg name->volume in label command of gnome-console.
487 - Fix SD acquire.c to release correct DCR by explicitly testing
488 on the dcr address rather than trying to devine if it is a read
489 or write dcr. This failed in error conditions when the device was
493 - Apply user supplied patch for more readable rate output
495 - Continue implementing migration.
496 - Implement support for removable filesystems in SD.
497 - Ensure that btraceback scripts can be read by anyone.
498 - Replace dvd-freespace and dvd-writepart by dvd-handler.
499 - Correct bug where canceling restore before the FD contacts
500 the SD causes the drive to be left in read mode.
501 - Move ofline_or_rewind into DEVICE::close().
502 - Eliminate close_device.
503 - Convert several dev subroutines to methods (e.g. bsf,
505 - Eliminate force_close_device().
506 - Implement Device Type directive in Device resource that
507 can have values File, Tape, Fifo, DVD, or Prog.
508 - Add has_cap() method to Device.
511 - Add patch from bug #527 to allow RedHat user to specify
512 options/user/group for starting each daemon in
515 - Add two new queries to query.sql provided by Arno. One
516 list volumes known to the Storage device, and the other
517 lists volumes possibly needing replacement (error, ...).
519 - Add periodic (every 24 hours) garbage collection of memory
520 pool by releasing free buffers.
522 - Correct bug counting sized (for display only) in smartall.c
523 - Print FD mempool stats if debug > 0 rather than 5.
525 - Make db_lock() mutex error fail the job rather than abort
526 Bacula. Canceling the job caused the mutex to fail.
527 - Correct bug in alist.c that re-allocated the list if the
528 number of items goes to zero.
529 - Move the reservation system thread locking to the top level
530 so that one job at a time tries all possible drives before
532 - Implement a reservation 'fail' message queue that is built
533 and destroyed on each pass through the reservation system.
534 These messages are displayed in a 'Jobs waiting to reserve
535 a drive' list during a 'status storage='. Note, multiple
536 messages will generally print for each JobId because they
537 represent the different problems with either the same drive
538 or different drives. If this output proves too confusing
539 of voluminous, I will display it only when debug level 1
540 or greater is enabled in the SD.
542 - Add enable/disable job=<job-name>. This command prevents
543 the specified job from being scheduled. Even when disabled,
544 the job can be manually started from the console.
545 - During 'update slots' clear all InChanger flags where the
546 StorageId is zero (old Media records).
550 - Fix autochanger code to strip leading spaces from returned
551 slots number. Remove bc from chio-changer.
552 - Back port a bit of 1.39 crypto code to reduce diffs.
553 - Fix first call to autochanger that missed close()ing the
554 drive. Put close() just before each run_program(). Fixes
557 - Add PoolId to Job record when updating it at job start time.
559 - Pull in more code from 1.39 so that there are fewer file
560 differences (the new ua_dotcmds.c, base64.h, crypto.h
561 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
562 util.c. Aside from ua_dotcmds.c these are mostly crypto
564 - Implement new method of walking the jcr chain. The
565 incr/dec of the use_count is done within the walking
566 routines. This should prevent a jcr from being freed
567 from under the walk routines.
572 - Start implementing Verify list output.
573 - Move the suitable_drive flag to a better place to prevent
574 premature termination of the reservation if all drives
575 are busy -- should fix Arno's diff/inc pool failures.
577 - Add mutex to single thread VSS code in Win32.
579 - Simplify code in askdir.c that waits for creating an appendable
580 volume so that it can handle multiple returns from the wait
582 - Modify the wait code to permit multiple returns.
583 - Return a zero when "autochanger drives" is called and
584 it is not an autochanger.
585 - Make rewind_dev() a method taking a DCR as an argument.
586 This permits closing and reopening the drive if the
587 rewind fails as happens if the drive was loaded while the
588 file descriptor was open. This refreshes the file descriptor.
589 - Remove the ST_OPENED flag and always rely on fd < 0 for knowing
590 if the device is open or not. This should eliminate
592 - Return error if reserve cannot find at least one suitable device.
593 - Make wait_for_sysop() return correct state information.
594 - Fix Win32 state file problem. write was not using compat
595 code. This should fix bug #500.
597 - Modify gui on command to set only GUI mode and not batch.
598 - Modify .messages command to always print messages regardless
600 - If GUI mode is on, suppress automatic printing of
602 - Delete old bnet packet code.
603 - Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
605 - Modify restore command in wx-console to set gui on and to use
606 only .messages instead of messages. Hopefully this fixes bug
608 - Fix seg fault in exit of acquire when canceling a job --
609 reported by Wolfgang Denk
610 - Pull in latest reservation system changes from 1.38
611 - Make .messages command always print messages regardless
612 of the automessages flag.
614 - Fix seg fault if user labels a drive directory bug #513
615 - Remove quotes around Version as it breaks things.
617 - Merge in Aleksandar Milivojevic's mods to the spec file.
618 - Apply sparse code fix for raw drives and fifos. Bug 506
619 - Thorsten fixed Unicode cd problem with wx-console bug 505.
621 - Correct reservation system to do a last ditch try
622 for any mounted volume, then anyone anywhere.
623 - Add quotes around table Version because of
624 error in MySQL 4.1.15 -- bug report submitted.
625 - Correct some minor problems with btape in the fill
627 - Updates to ssh-tunnel from Joshua Kugler.
628 - Added a report.pl program from Jonas Bjorklund.
629 - Simplify the O_NONBLOCK open() code for tape drives,
630 and always open nonblocking.
631 - Do not wait for open() if EIO returned (shouldn't happen).
632 - Eliminate 3 argument to tape open().
633 - Correct the slot # edited in the 3995 Bad autochanger unload
635 - With -S on bscan (show progress) do not divide by zero.
637 - Make cancel pthread_cond_signal() pthread_cond_broadcast().
638 - When dcr is freed, also broadcast dev->wait_next_vol signal.
639 - Remove unused code in wait_for_device.
640 - Make wait_for_device() always return after 60 seconds of wait.
644 - Add stubs for non-crypto build.
646 - Use localhost if no network configured
648 - Eliminated duplicate MaxVolBytes in cat update -- bug 509.
649 - Remove debug print.
650 - Add bail_out in error during state file reading.
652 - Merge changes made to 1.38.3 into HEAD
653 - Add stubs for pygtk-console code
654 - Create Makefile.in for pygtk-console code
656 - Merge updates into 1.38 branch
657 - Update specs to include mysql4 define.
658 - Fix when attributes are sent, must be after binit().
659 - Stop read_record() if status not ok in second loop.
660 - Return rec->FileIndex in dcr->VolLastIndex for normal
661 and partial records in read_record(). This allows bscan
662 to get FileIndex at EOT correct.
663 - Fix butil.c to correctly set dcr -- fixes seg fault in bls.
665 - Fix Win32 built to work with new crypto code.
666 - Apply patch supplied by user (slightly modified) to fix
667 correct detection of holes in block devices and FIFOs.
669 - Apply patch supplied by user (slightly modified)
670 to fix SD hang with multiple pools and bad client
673 - Add nagios plugin to the examples directory. Submitted by
675 - Remove warning message about multiple saves of hardlinked files
676 from find_one.c as it can generate too many warning messages.
677 - Modify most restore error messages to be queued so that they
678 appear at the end of the job rather than mixted with the restore
679 listing where they could be "lost".
681 - Reset timeout values before select() per patch from
682 Frank Sweetser for problems with non-blocking sockets.
683 - Unlink the state file if either reading or writing it gets
684 errors. Hopefully this will fix Win32 exit problems.
685 - Add sanity check in append.c to ensure that dcr is not NULL.
686 This can happen if multiple drive autochanger SCSI control
687 channel and drive indicies do not correspond.
689 - Get next volume from Scratch pool before creating a volume.
690 - Set new Pool defaults in Vol when moved from Scratch Pool.
691 - Remove argument from create_bacula_database for SQLite as it
693 - Add back index code so that two drive autochangers can get
695 - Change a bunch of debug levels to aid debugging autochangers.
696 - Fix reservation so that mutexes are properly applied.
697 - Rework reservation algorithm so that two drives can be used
700 - Landon merged his data encription changes into the HEAD
701 - Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
702 If this patch is applied, the number of days can be specified with
703 "list nextvol days=xx"
706 My use case is to be able to preview the next scheduled job (and the
707 next tape to be used) on fridays if there are no scheduled jobs during
711 - Fix font code in gnome2 console user patch. Fixes bug #501.
712 - Fix malformatted bnet error message that caused seg fault
714 - Applied user patch to improve README.vc8 in src/win32.
716 - Add Migrate, Copy, Archive Job types (some where there)
717 - Correct some more editing of JobId's (for 64 bit compatibility).
718 - Ensure that StorageId is stored in Media record when ever possible.
719 - Add Migration Job to Job.
720 - Add Migration Time, Migration High Bytes, Migration Low Bytes
721 Next Pool to Pool resource.
722 - Add more code to mac.c (migration archive copy).
723 - Change Start Storage daemon job to require read and write storage
725 - Pass read storage data to SD as well as write storage data.
726 - Remove old code from winservice.cpp
727 - Break on error in scan.
728 - Fix typo in signal.c
729 - Separate read/write DCR in SD. Add jcr->read_dcr.
730 - Cleanup how find_device() works.
731 - Add read output to Status in SD.
734 - Add red-black btree routines
736 - Remove abs() in bfile.c so that it compiles on Solaris.
739 - Fix crash in tray-monitor when daemon disconnects. Bug #479.
740 - Fix bnet-server bug found on OpenBSD. Bug #486
741 - Fix cancel failure bug. Bug #481
742 - Fix failure when Pool name has spaces. Bug #487
743 - Fix SD crash in autochanger code. Mutex failure. Bug #488
744 - Fix a couple of free()s in src/filed/acl.c
745 - Fix memory overrun in bfile.c in building OS X resource
746 fork filename. Bug #489
747 - Add Pool name to SD status output.
749 - Apply SunOS patch for ACLs submitted by David Duchscher.
750 - Make sure to set storage before trying to set drive.
751 - Add bacula_mail_summary.sh to examples directory. It makes
752 a single email summary of any number of jobs. Submitted
754 - Make sure when we do a mount to unblock the device even
755 if the drive could not be opened.
757 - Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
758 and correct a few minor problems to make it build on Linux.
760 - Remove delete of CVS from all Makefiles
761 - Fix seg fault when clicking on Add button in wx-console
762 restore panel. Bug #470.
763 - Fix copyright date and URL typo -- bug #468.
764 - Change autostart install for FreeBSD to look for rc.conf
765 rather than rc.local as suggested fix for bug #466.
766 - Apply patch supplied by Eric Bollengier to fix PostgreSQL
767 grant on status. Bug #465
768 - Apply patch supplied by Eric Bollengier to fix PostgreSQL
769 update script. Bug #464
770 - Tweak #ifdefing a bit in new Win32 stream code.
771 - Fix #ifdeffing for FD_NO_SEND_TEST.
772 - Add documentation of performance #defines