2 Bacula® - The Network Backup Solution
4 Copyright (C) 2000-2008 Free Software Foundation Europe e.V.
6 The main author of Bacula is Kern Sibbald, with contributions from
7 many others, a complete list can be found in the file AUTHORS.
8 This program is Free Software; you can redistribute it and/or
9 modify it under the terms of version two of the GNU General Public
10 License as published by the Free Software Foundation and included
13 This program is distributed in the hope that it will be useful, but
14 WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 Bacula® is a registered trademark of John Walker.
24 The licensor of Bacula is the Free Software Foundation Europe
25 (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
26 Switzerland, email:ftf@fsfeurope.org.
30 * Bacula Director -- msgchan.c -- handles the message channel
31 * to the Storage daemon and the File daemon.
33 * Kern Sibbald, August MM
35 * This routine runs as a thread and must be thread reentrant.
37 * Basic tasks done here:
38 * Open a message channel with the Storage daemon
39 * to authenticate ourself and to pass the JobId.
40 * Create a thread to interact with the Storage daemon
41 * who returns a job status and requests Catalog services, etc.
49 static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER;
51 /* Commands sent to Storage daemon */
52 static char jobcmd[] = "JobId=%s job=%s job_name=%s client_name=%s "
53 "type=%d level=%d FileSet=%s NoAttr=%d SpoolAttr=%d FileSetMD5=%s "
54 "SpoolData=%d WritePartAfterJob=%d PreferMountedVols=%d SpoolSize=%s\n";
55 static char use_storage[] = "use storage=%s media_type=%s pool_name=%s "
56 "pool_type=%s append=%d copy=%d stripe=%d\n";
57 static char use_device[] = "use device=%s\n";
58 //static char query_device[] = _("query device=%s");
60 /* Response from Storage daemon */
61 static char OKjob[] = "3000 OK Job SDid=%d SDtime=%d Authorization=%100s\n";
62 static char OK_device[] = "3000 OK use device device=%s\n";
64 /* Storage Daemon requests */
65 static char Job_start[] = "3010 Job %127s start\n";
66 static char Job_end[] =
67 "3099 Job %127s end JobStatus=%d JobFiles=%d JobBytes=%" lld "\n";
69 /* Forward referenced functions */
70 extern "C" void *msg_thread(void *arg);
73 * Establish a message channel connection with the Storage daemon
74 * and perform authentication.
76 bool connect_to_storage_daemon(JCR *jcr, int retry_interval,
77 int max_retry_time, int verbose)
83 if (jcr->store_bsock) {
84 return true; /* already connected */
87 /* If there is a write storage use it */
94 if (store->heartbeat_interval) {
95 heart_beat = store->heartbeat_interval;
97 heart_beat = director->heartbeat_interval;
101 * Open message channel with the Storage daemon
103 Dmsg2(100, "bnet_connect to Storage daemon %s:%d\n", store->address,
105 sd = bnet_connect(jcr, retry_interval, max_retry_time, heart_beat,
106 _("Storage daemon"), store->address,
107 NULL, store->SDport, verbose);
111 sd->res = (RES *)store; /* save pointer to other end */
112 jcr->store_bsock = sd;
114 if (!authenticate_storage_daemon(jcr, store)) {
116 jcr->store_bsock = NULL;
123 * Here we ask the SD to send us the info for a
124 * particular device resource.
127 bool update_device_res(JCR *jcr, DEVICE *dev)
129 POOL_MEM device_name;
131 if (!connect_to_storage_daemon(jcr, 5, 30, 0)) {
134 sd = jcr->store_bsock;
135 pm_strcpy(device_name, dev->name());
136 bash_spaces(device_name);
137 sd->fsend(query_device, device_name.c_str());
138 Dmsg1(100, ">stored: %s\n", sd->msg);
139 /* The data is returned through Device_update */
140 if (bget_dirmsg(sd) <= 0) {
148 * Start a job with the Storage daemon
150 bool start_storage_daemon_job(JCR *jcr, alist *rstore, alist *wstore)
156 POOL_MEM store_name, device_name, pool_name, pool_type, media_type;
157 POOL_MEM job_name, client_name, fileset_name;
160 char ed1[30], ed2[30];
162 sd = jcr->store_bsock;
164 * Now send JobId and permissions, and get back the authorization key.
166 pm_strcpy(job_name, jcr->job->name());
167 bash_spaces(job_name);
168 pm_strcpy(client_name, jcr->client->name());
169 bash_spaces(client_name);
170 pm_strcpy(fileset_name, jcr->fileset->name());
171 bash_spaces(fileset_name);
172 if (jcr->fileset->MD5[0] == 0) {
173 bstrncpy(jcr->fileset->MD5, "**Dummy**", sizeof(jcr->fileset->MD5));
175 /* If rescheduling, cancel the previous incarnation of this job
176 * with the SD, which might be waiting on the FD connection.
177 * If we do not cancel it the SD will not accept a new connection
178 * for the same jobid.
180 if (jcr->reschedule_count) {
181 sd->fsend("cancel Job=%s\n", jcr->Job);
182 while (sd->recv() >= 0)
185 sd->fsend(jobcmd, edit_int64(jcr->JobId, ed1), jcr->Job,
186 job_name.c_str(), client_name.c_str(),
187 jcr->JobType, jcr->JobLevel,
188 fileset_name.c_str(), !jcr->pool->catalog_files,
189 jcr->job->SpoolAttributes, jcr->fileset->MD5, jcr->spool_data,
190 jcr->write_part_after_job, jcr->job->PreferMountedVolumes,
191 edit_int64(jcr->spool_size, ed2));
192 Dmsg1(100, ">stored: %s\n", sd->msg);
193 if (bget_dirmsg(sd) > 0) {
194 Dmsg1(100, "<stored: %s", sd->msg);
195 if (sscanf(sd->msg, OKjob, &jcr->VolSessionId,
196 &jcr->VolSessionTime, &auth_key) != 3) {
197 Dmsg1(100, "BadJob=%s\n", sd->msg);
198 Jmsg(jcr, M_FATAL, 0, _("Storage daemon rejected Job command: %s\n"), sd->msg);
201 jcr->sd_auth_key = bstrdup(auth_key);
202 Dmsg1(150, "sd_auth_key=%s\n", jcr->sd_auth_key);
205 Jmsg(jcr, M_FATAL, 0, _("<stored: bad response to Job command: %s\n"),
211 * We have two loops here. The first comes from the
212 * Storage = associated with the Job, and we need
213 * to attach to each one.
214 * The inner loop loops over all the alternative devices
215 * associated with each Storage. It selects the first
219 /* Do read side of storage daemon */
221 /* For the moment, only migrate and copy have rpool */
222 if (jcr->JobType == JT_MIGRATE || jcr->JobType == JT_COPY) {
223 pm_strcpy(pool_type, jcr->rpool->pool_type);
224 pm_strcpy(pool_name, jcr->rpool->name());
226 pm_strcpy(pool_type, jcr->pool->pool_type);
227 pm_strcpy(pool_name, jcr->pool->name());
229 bash_spaces(pool_type);
230 bash_spaces(pool_name);
231 foreach_alist(storage, rstore) {
232 Dmsg1(100, "Rstore=%s\n", storage->name());
233 bash_spaces(store_name);
234 pm_strcpy(media_type, storage->media_type);
235 bash_spaces(media_type);
236 sd->fsend(use_storage, store_name.c_str(), media_type.c_str(),
237 pool_name.c_str(), pool_type.c_str(), 0, copy, stripe);
238 Dmsg1(100, "rstore >stored: %s", sd->msg);
240 /* Loop over alternative storage Devices until one is OK */
241 foreach_alist(dev, storage->device) {
242 pm_strcpy(device_name, dev->name());
243 bash_spaces(device_name);
244 sd->fsend(use_device, device_name.c_str());
245 Dmsg1(100, ">stored: %s", sd->msg);
247 sd->signal(BNET_EOD); /* end of Devices */
249 sd->signal(BNET_EOD); /* end of Storages */
250 if (bget_dirmsg(sd) > 0) {
251 Dmsg1(100, "<stored: %s", sd->msg);
252 /* ****FIXME**** save actual device name */
253 ok = sscanf(sd->msg, OK_device, device_name.c_str()) == 1;
259 /* Do write side of storage daemon */
261 pm_strcpy(pool_type, jcr->pool->pool_type);
262 pm_strcpy(pool_name, jcr->pool->name());
263 bash_spaces(pool_type);
264 bash_spaces(pool_name);
265 foreach_alist(storage, wstore) {
266 pm_strcpy(store_name, storage->name());
267 bash_spaces(store_name);
268 pm_strcpy(media_type, storage->media_type);
269 bash_spaces(media_type);
270 sd->fsend(use_storage, store_name.c_str(), media_type.c_str(),
271 pool_name.c_str(), pool_type.c_str(), 1, copy, stripe);
273 Dmsg1(100, "wstore >stored: %s", sd->msg);
275 /* Loop over alternative storage Devices until one is OK */
276 foreach_alist(dev, storage->device) {
277 pm_strcpy(device_name, dev->name());
278 bash_spaces(device_name);
279 sd->fsend(use_device, device_name.c_str());
280 Dmsg1(100, ">stored: %s", sd->msg);
282 sd->signal(BNET_EOD); /* end of Devices */
284 sd->signal(BNET_EOD); /* end of Storages */
285 if (bget_dirmsg(sd) > 0) {
286 Dmsg1(100, "<stored: %s", sd->msg);
287 /* ****FIXME**** save actual device name */
288 ok = sscanf(sd->msg, OK_device, device_name.c_str()) == 1;
296 pm_strcpy(err_msg, sd->msg); /* save message */
297 Jmsg(jcr, M_FATAL, 0, _("\n"
298 " Storage daemon didn't accept Device \"%s\" because:\n %s"),
299 device_name.c_str(), err_msg.c_str()/* sd->msg */);
301 Jmsg(jcr, M_FATAL, 0, _("\n"
302 " Storage daemon didn't accept Device \"%s\" command.\n"),
303 device_name.c_str());
306 Jmsg(jcr, M_INFO, 0, _("Using Device \"%s\"\n"), device_name.c_str());
312 * Start a thread to handle Storage daemon messages and
315 bool start_storage_daemon_message_thread(JCR *jcr)
320 jcr->inc_use_count(); /* mark in use by msg thread */
321 jcr->sd_msg_thread_done = false;
322 jcr->SD_msg_chan = 0;
323 Dmsg0(100, "Start SD msg_thread.\n");
324 if ((status=pthread_create(&thid, NULL, msg_thread, (void *)jcr)) != 0) {
326 Jmsg1(jcr, M_ABORT, 0, _("Cannot create message thread: %s\n"), be.bstrerror(status));
328 /* Wait for thread to start */
329 while (jcr->SD_msg_chan == 0) {
331 if (job_canceled(jcr) || jcr->sd_msg_thread_done) {
335 Dmsg1(100, "SD msg_thread started. use=%d\n", jcr->use_count());
339 extern "C" void msg_thread_cleanup(void *arg)
341 JCR *jcr = (JCR *)arg;
342 db_end_transaction(jcr, jcr->db); /* terminate any open transaction */
343 jcr->sd_msg_thread_done = true;
344 jcr->SD_msg_chan = 0;
345 pthread_cond_broadcast(&jcr->term_wait); /* wakeup any waiting threads */
346 Dmsg1(100, "=== End msg_thread. use=%d\n", jcr->use_count());
347 free_jcr(jcr); /* release jcr */
348 db_thread_cleanup(); /* remove thread specific data */
352 * Handle the message channel (i.e. requests from the
354 * Note, we are running in a separate thread.
356 extern "C" void *msg_thread(void *arg)
358 JCR *jcr = (JCR *)arg;
361 char Job[MAX_NAME_LENGTH];
366 pthread_detach(pthread_self());
368 jcr->SD_msg_chan = pthread_self();
369 pthread_cleanup_push(msg_thread_cleanup, arg);
370 sd = jcr->store_bsock;
372 /* Read the Storage daemon's output.
374 Dmsg0(100, "Start msg_thread loop\n");
375 while (!job_canceled(jcr) && bget_dirmsg(sd) >= 0) {
376 Dmsg1(400, "<stored: %s", sd->msg);
377 if (sscanf(sd->msg, Job_start, Job) == 1) {
380 if ((stat=sscanf(sd->msg, Job_end, Job, &JobStatus, &JobFiles,
382 jcr->SDJobStatus = JobStatus; /* termination status */
383 jcr->SDJobFiles = JobFiles;
384 jcr->SDJobBytes = JobBytes;
387 Dmsg2(400, "end loop stat=%d use=%d\n", stat, jcr->use_count());
389 if (is_bnet_error(sd)) {
390 jcr->SDJobStatus = JS_ErrorTerminated;
392 pthread_cleanup_pop(1); /* remove and execute the handler */
396 void wait_for_storage_daemon_termination(JCR *jcr)
398 int cancel_count = 0;
399 /* Now wait for Storage daemon to terminate our message thread */
400 while (!jcr->sd_msg_thread_done) {
403 struct timespec timeout;
405 gettimeofday(&tv, &tz);
407 timeout.tv_sec = tv.tv_sec + 5; /* wait 5 seconds */
408 Dmsg0(400, "I'm waiting for message thread termination.\n");
410 pthread_cond_timedwait(&jcr->term_wait, &mutex, &timeout);
412 if (job_canceled(jcr)) {
413 if (jcr->SD_msg_chan) {
414 jcr->store_bsock->set_timed_out();
415 jcr->store_bsock->set_terminated();
416 Dmsg2(400, "kill jobid=%d use=%d\n", (int)jcr->JobId, jcr->use_count());
417 pthread_kill(jcr->SD_msg_chan, TIMEOUT_SIGNAL);
421 /* Give SD 30 seconds to clean up after cancel */
422 if (cancel_count == 6) {
426 set_jcr_job_status(jcr, JS_Terminated);
432 extern "C" void *device_thread(void *arg)
439 pthread_detach(pthread_self());
440 jcr = new_control_jcr("*DeviceInit*", JT_SYSTEM);
441 for (i=0; i < MAX_TRIES; i++) {
442 if (!connect_to_storage_daemon(jcr, 10, 30, 1)) {
443 Dmsg0(900, "Failed connecting to SD.\n");
447 foreach_res(dev, R_DEVICE) {
448 if (!update_device_res(jcr, dev)) {
449 Dmsg1(900, "Error updating device=%s\n", dev->name());
451 Dmsg1(900, "Updated Device=%s\n", dev->name());
455 bnet_close(jcr->store_bsock);
456 jcr->store_bsock = NULL;
465 * Start a thread to handle getting Device resource information
466 * from SD. This is called once at startup of the Director.
468 void init_device_resources()
473 Dmsg0(100, "Start Device thread.\n");
474 if ((status=pthread_create(&thid, NULL, device_thread, NULL)) != 0) {
476 Jmsg1(NULL, M_ABORT, 0, _("Cannot create message thread: %s\n"), be.bstrerror(status));