2 Bacula® - The Network Backup Solution
4 Copyright (C) 2002-2008 Free Software Foundation Europe e.V.
6 The main author of Bacula is Kern Sibbald, with contributions from
7 many others, a complete list can be found in the file AUTHORS.
8 This program is Free Software; you can redistribute it and/or
9 modify it under the terms of version two of the GNU General Public
10 License as published by the Free Software Foundation and included
13 This program is distributed in the hope that it will be useful, but
14 WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 Bacula® is a registered trademark of Kern Sibbald.
24 The licensor of Bacula is the Free Software Foundation Europe
25 (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
26 Switzerland, email:ftf@fsfeurope.org.
29 * Routines to acquire and release a device for read/write
31 * Kern Sibbald, August MMII
36 #include "bacula.h" /* pull in global headers */
37 #include "stored.h" /* pull in Storage Deamon headers */
39 /* Forward referenced functions */
40 static void attach_dcr_to_dev(DCR *dcr);
41 static void set_dcr_from_vol(DCR *dcr, VOL_LIST *vol);
44 /*********************************************************************
45 * Acquire device for reading.
46 * The drive should have previously been reserved by calling
47 * reserve_device_for_read(). We read the Volume label from the block and
48 * leave the block pointers just after the label.
50 * Returns: NULL if failed for any reason
53 bool acquire_device_for_read(DCR *dcr)
55 DEVICE *dev = dcr->dev;
58 bool tape_previously_mounted;
59 bool tape_initially_mounted;
61 bool try_autochanger = true;
66 Dmsg1(950, "jcr->dcr=%p\n", jcr->dcr);
67 dev->dblock(BST_DOING_ACQUIRE);
69 if (dev->num_writers > 0) {
70 Jmsg2(jcr, M_FATAL, 0, _("Acquire read: num_writers=%d not zero. Job %d canceled.\n"),
71 dev->num_writers, jcr->JobId);
75 /* Find next Volume, if any */
79 Jmsg(jcr, M_FATAL, 0, _("No volumes specified for reading. Job %s canceled.\n"),
80 edit_int64(jcr->JobId, ed1));
84 for (i=1; i<jcr->CurReadVolume; i++) {
88 Jmsg(jcr, M_FATAL, 0, _("Logic error: no next volume to read. Numvol=%d Curvol=%d\n"),
89 jcr->NumReadVolumes, jcr->CurReadVolume);
90 goto get_out; /* should not happen */
92 set_dcr_from_vol(dcr, vol);
94 Dmsg2(100, "Want Vol=%s Slot=%d\n", vol->VolumeName, vol->Slot);
97 * If the MediaType requested for this volume is not the
98 * same as the current drive, we attempt to find the same
99 * device that was used to write the orginal volume. If
100 * found, we switch to using that device.
102 * N.B. A lot of routines rely on the dcr pointer not changing
103 * read_records.c even has multiple dcrs cached, so we take care
104 * here to release all important parts of the dcr and re-acquire
105 * them such as the block pointer (size may change), but we do
106 * not release the dcr.
108 Dmsg2(50, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
109 if (dcr->media_type[0] && strcmp(dcr->media_type, dev->device->media_type) != 0) {
114 Jmsg3(jcr, M_INFO, 0, _("Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
116 dcr->media_type, dev->device->media_type, dev->print_name());
117 Dmsg3(50, "Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
119 dcr->media_type, dev->device->media_type, dev->print_name());
121 dev->dunblock(DEV_UNLOCKED);
124 memset(&rctx, 0, sizeof(RCTX));
126 jcr->reserve_msgs = New(alist(10, not_owned_by_alist));
127 rctx.any_drive = true;
128 rctx.device_name = vol->device;
129 store = new DIRSTORE;
130 memset(store, 0, sizeof(DIRSTORE));
131 store->name[0] = 0; /* No dir name */
132 bstrncpy(store->media_type, vol->MediaType, sizeof(store->media_type));
133 bstrncpy(store->pool_name, dcr->pool_name, sizeof(store->pool_name));
134 bstrncpy(store->pool_type, dcr->pool_type, sizeof(store->pool_type));
135 store->append = false;
137 clean_device(dcr); /* clean up the dcr */
140 * Search for a new device
142 stat = search_res_for_device(rctx);
143 release_reserve_messages(jcr); /* release queued messages */
144 unlock_reservations();
147 dev = dcr->dev; /* get new device pointer */
148 dev->dblock(BST_DOING_ACQUIRE);
149 dcr->VolumeName[0] = 0;
150 Jmsg(jcr, M_INFO, 0, _("Media Type change. New read device %s chosen.\n"),
152 Dmsg1(50, "Media Type change. New read device %s chosen.\n", dev->print_name());
154 bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
155 bstrncpy(dcr->VolCatInfo.VolCatName, vol->VolumeName, sizeof(dcr->VolCatInfo.VolCatName));
156 bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
157 dcr->VolCatInfo.Slot = vol->Slot;
158 dcr->VolCatInfo.InChanger = vol->Slot > 0;
159 bstrncpy(dcr->pool_name, store->pool_name, sizeof(dcr->pool_name));
160 bstrncpy(dcr->pool_type, store->pool_type, sizeof(dcr->pool_type));
163 Jmsg1(jcr, M_FATAL, 0, _("No suitable device found to read Volume \"%s\"\n"),
165 Dmsg1(50, "No suitable device found to read Volume \"%s\"\n", vol->VolumeName);
172 if (dev->vol && dev->vol->is_swapping()) {
173 dev->vol->set_slot(vol->Slot);
174 Dmsg3(100, "swapping: slot=%d Vol=%s dev=%s\n", dev->vol->get_slot(),
175 dev->vol->vol_name, dev->print_name());
178 init_device_wait_timers(dcr);
180 tape_previously_mounted = dev->can_read() || dev->can_append() ||
182 tape_initially_mounted = tape_previously_mounted;
185 /* Volume info is always needed because of VolParts */
186 Dmsg1(150, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
187 if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_READ)) {
188 Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
189 dcr->VolumeName, jcr->errmsg);
190 Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
192 dev->set_load(); /* set to load volume */
195 /* If not polling limit retries */
196 if (!dev->poll && retry++ > 10) {
199 dev->clear_labeled(); /* force reread of label */
200 if (job_canceled(jcr)) {
202 Mmsg1(dev->errmsg, _("Job %s canceled.\n"), edit_int64(jcr->JobId, ed1));
203 Jmsg(jcr, M_INFO, 0, dev->errmsg);
204 goto get_out; /* error return */
208 dcr->do_swapping(false/*!is_writing*/);
209 dcr->do_load(false /*!is_writing*/);
210 set_dcr_from_vol(dcr, vol); /* refresh dcr with desired volume info */
213 * This code ensures that the device is ready for
214 * reading. If it is a file, it opens it.
215 * If it is a tape, it checks the volume name
217 Dmsg1(100, "bstored: open vol=%s\n", dcr->VolumeName);
218 if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
220 Jmsg3(jcr, M_WARNING, 0, _("Read open device %s Volume \"%s\" failed: ERR=%s\n"),
221 dev->print_name(), dcr->VolumeName, dev->bstrerror());
225 Dmsg1(50, "opened dev %s OK\n", dev->print_name());
227 /* Read Volume Label */
228 Dmsg0(50, "calling read-vol-label\n");
229 vol_label_status = read_dev_volume_label(dcr);
230 switch (vol_label_status) {
232 Dmsg0(50, "Got correct volume.\n");
234 dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
237 Dmsg0(50, "IO Error\n");
239 * Send error message generated by read_dev_volume_label()
240 * only we really had a tape mounted. This supresses superfluous
241 * error messages when nothing is mounted.
243 if (tape_previously_mounted) {
244 Jmsg(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
248 Dmsg0(50, "Vol name error.\n");
249 if (dev->is_volume_to_unload()) {
252 dev->set_unload(); /* force unload of unwanted tape */
253 if (!unload_autochanger(dcr, -1)) {
254 /* at least free the device so we can re-open with correct volume */
260 Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
262 Dmsg0(50, "default path\n");
263 tape_previously_mounted = true;
266 * If the device requires mount, close it, so the device can be ejected.
268 if (dev->requires_mount()) {
272 /* Call autochanger only once unless ask_sysop called */
273 if (try_autochanger) {
275 Dmsg2(200, "calling autoload Vol=%s Slot=%d\n",
276 dcr->VolumeName, dcr->VolCatInfo.Slot);
277 stat = autoload_device(dcr, 0, NULL);
279 try_autochanger = false;
280 continue; /* try reading volume mounted */
284 /* Mount a specific volume and no other */
285 Dmsg0(200, "calling dir_ask_sysop\n");
286 if (!dir_ask_sysop_to_mount_volume(dcr, ST_READ)) {
287 goto get_out; /* error return */
290 /* Volume info is always needed because of VolParts */
291 Dmsg1(150, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
292 if (!dir_get_volume_info(dcr, GET_VOL_INFO_FOR_READ)) {
293 Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
294 dcr->VolumeName, jcr->errmsg);
295 Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
297 dev->set_load(); /* set to load volume */
299 try_autochanger = true; /* permit trying the autochanger again */
301 continue; /* try reading again */
307 Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s for reading.\n"),
314 set_jcr_job_status(jcr, JS_Running);
315 dir_send_job_status(jcr);
316 Jmsg(jcr, M_INFO, 0, _("Ready to read from volume \"%s\" on device %s.\n"),
317 dcr->VolumeName, dev->print_name());
321 dcr->clear_reserved();
323 * Normally we are blocked, but in at least one error case above
324 * we are not blocked because we unsuccessfully tried changing
327 if (dev->is_blocked()) {
328 dev->dunblock(DEV_LOCKED);
330 dev->dunlock(); /* dunblock() unlock the device too */
332 Dmsg1(950, "jcr->dcr=%p\n", jcr->dcr);
338 * Acquire device for writing. We permit multiple writers.
339 * If this is the first one, we read the label.
341 * Returns: NULL if failed for any reason
343 * Note, normally reserve_device_for_append() is called
344 * before this routine.
346 DCR *acquire_device_for_append(DCR *dcr)
348 DEVICE *dev = dcr->dev;
351 bool have_vol = false;
353 init_device_wait_timers(dcr);
355 dev->dblock(BST_DOING_ACQUIRE);
356 Dmsg1(100, "acquire_append device is %s\n", dev->is_tape()?"tape":
357 (dev->is_dvd()?"DVD":"disk"));
360 * With the reservation system, this should not happen
362 if (dev->can_read()) {
363 Jmsg1(jcr, M_FATAL, 0, _("Want to append, but device %s is busy reading.\n"), dev->print_name());
364 Dmsg1(200, "Want to append but device %s is busy reading.\n", dev->print_name());
371 * have_vol defines whether or not mount_next_write_volume should
372 * ask the Director again about what Volume to use.
374 if (dev->can_append() && dcr->is_suitable_volume_mounted() &&
375 strcmp(dcr->VolCatInfo.VolCatStatus, "Recycle") != 0) {
376 Dmsg0(190, "device already in append.\n");
378 * At this point, the correct tape is already mounted, so
379 * we do not need to do mount_next_write_volume(), unless
380 * we need to recycle the tape.
382 if (dev->num_writers == 0) {
383 memcpy(&dev->VolCatInfo, &dcr->VolCatInfo, sizeof(dev->VolCatInfo));
385 have_vol = dcr->is_tape_position_ok();
389 Dmsg1(190, "jid=%u Do mount_next_write_vol\n", (uint32_t)jcr->JobId);
390 if (!dcr->mount_next_write_volume()) {
391 if (!job_canceled(jcr)) {
392 /* Reduce "noise" -- don't print if job canceled */
393 Jmsg(jcr, M_FATAL, 0, _("Could not ready device %s for append.\n"),
395 Dmsg1(200, "Could not ready device %s for append.\n",
400 Dmsg2(190, "Output pos=%u:%u\n", dcr->dev->file, dcr->dev->block_num);
403 dev->num_writers++; /* we are now a writer */
404 if (jcr->NumWriteVolumes == 0) {
405 jcr->NumWriteVolumes = 1;
407 dev->VolCatInfo.VolCatJobs++; /* increment number of jobs on vol */
408 dir_update_volume_info(dcr, false, false); /* send Volume info to Director */
413 dcr->clear_reserved();
414 dev->dunblock(DEV_LOCKED);
415 return ok ? dcr : NULL;
419 * This job is done, so release the device. From a Unix standpoint,
420 * the device remains open.
422 * Note, if we are spooling, we may enter with the device locked.
423 * However, in all cases, unlock the device when leaving.
426 bool release_device(DCR *dcr)
429 DEVICE *dev = dcr->dev;
433 /* lock only if not already locked by this thread */
434 if (!dcr->is_dev_locked()) {
438 Dmsg2(100, "release_device device %s is %s\n", dev->print_name(), dev->is_tape()?"tape":"disk");
440 /* if device is reserved, job never started, so release the reserve here */
441 dcr->clear_reserved();
443 if (dev->can_read()) {
444 VOLUME_CAT_INFO *vol = &dev->VolCatInfo;
445 dev->clear_read(); /* clear read bit */
446 Dmsg2(150, "dir_update_vol_info. label=%d Vol=%s\n",
447 dev->is_labeled(), vol->VolCatName);
448 if (dev->is_labeled() && vol->VolCatName[0] != 0) {
449 dir_update_volume_info(dcr, false, false); /* send Volume info to Director */
450 remove_read_volume(jcr, dcr->VolumeName);
453 } else if (dev->num_writers > 0) {
455 * Note if WEOT is set, we are at the end of the tape
456 * and may not be positioned correctly, so the
457 * job_media_record and update_vol_info have already been
458 * done, which means we skip them here.
461 Dmsg1(100, "There are %d writers in release_device\n", dev->num_writers);
462 if (dev->is_labeled()) {
463 Dmsg2(200, "dir_create_jobmedia. Release vol=%s dev=%s\n",
464 dev->VolCatInfo.VolCatName, dev->print_name());
465 if (!dev->at_weot() && !dir_create_jobmedia_record(dcr)) {
466 Jmsg2(jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
467 dcr->VolCatInfo.VolCatName, jcr->Job);
469 /* If no more writers, and no errors, and wrote something, write an EOF */
470 if (!dev->num_writers && dev->can_write() && dev->block_num > 0) {
472 write_ansi_ibm_labels(dcr, ANSI_EOF_LABEL, dev->VolHdr.VolumeName);
474 if (!dev->at_weot()) {
475 dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
476 /* Note! do volume update before close, which zaps VolCatInfo */
477 dir_update_volume_info(dcr, false, false); /* send Volume info to Director */
478 Dmsg2(200, "dir_update_vol_info. Release vol=%s dev=%s\n",
479 dev->VolCatInfo.VolCatName, dev->print_name());
481 if (dev->num_writers == 0) { /* if not being used */
482 volume_unused(dcr); /* we obviously are not using the volume */
488 * If we reach here, it is most likely because the job
489 * has failed, since the device is not in read mode and
490 * there are no writers. It was probably reserved.
495 Dmsg3(100, "%d writers, %d reserve, dev=%s\n", dev->num_writers, dev->num_reserved(),
497 debug_list_volumes("acquire:release_device()");
500 /* If no writers, close if file or !CAP_ALWAYS_OPEN */
501 if (dev->num_writers == 0 && (!dev->is_tape() || !dev->has_cap(CAP_ALWAYSOPEN))) {
502 dvd_remove_empty_part(dcr); /* get rid of any empty spool part */
506 /* Fire off Alert command and include any output */
507 if (!job_canceled(jcr) && dcr->device->alert_command) {
511 char line[MAXSTRING];
512 alert = get_pool_memory(PM_FNAME);
513 alert = edit_device_codes(dcr, alert, dcr->device->alert_command, "");
514 bpipe = open_bpipe(alert, 0, "r");
516 while (fgets(line, sizeof(line), bpipe->rfd)) {
517 Jmsg(jcr, M_ALERT, 0, _("Alert: %s"), line);
519 status = close_bpipe(bpipe);
525 Jmsg(jcr, M_ALERT, 0, _("3997 Bad alert command: %s: ERR=%s.\n"),
526 alert, be.bstrerror(status));
529 Dmsg1(400, "alert status=%d\n", status);
530 free_pool_memory(alert);
532 pthread_cond_broadcast(&dev->wait_next_vol);
533 Dmsg2(100, "JobId=%u broadcast wait_device_release at %s\n",
534 (uint32_t)jcr->JobId, bstrftimes(tbuf, sizeof(tbuf), (utime_t)time(NULL)));
535 pthread_cond_broadcast(&wait_device_release);
538 detach_dcr_from_dev(dcr);
540 if (jcr->read_dcr == dcr) {
541 jcr->read_dcr = NULL;
543 if (jcr->dcr == dcr) {
548 Dmsg2(100, "===== Device %s released by JobId=%u\n", dev->print_name(),
549 (uint32_t)jcr->JobId);
554 * Clean up the device for reuse without freeing the memory
556 bool clean_device(DCR *dcr)
559 dcr->keep_dcr = true; /* do not free the dcr */
560 ok = release_device(dcr);
561 dcr->keep_dcr = false;
566 * Create a new Device Control Record and attach
567 * it to the device (if this is a real job).
568 * Note, this has been updated so that it can be called first
569 * without a DEVICE, then a second or third time with a DEVICE,
570 * and each time, it should cleanup and point to the new device.
571 * This should facilitate switching devices.
572 * Note, each dcr must point to the controlling job (jcr). However,
573 * a job can have multiple dcrs, so we must not store in the jcr's
574 * structure as previously. The higher level routine must store
575 * this dcr in the right place
578 DCR *new_dcr(JCR *jcr, DCR *dcr, DEVICE *dev)
581 dcr = (DCR *)malloc(sizeof(DCR));
582 memset(dcr, 0, sizeof(DCR));
583 dcr->tid = pthread_self();
586 dcr->jcr = jcr; /* point back to jcr */
587 /* Set device information, possibly change device */
590 free_block(dcr->block);
592 dcr->block = new_block(dev);
594 free_record(dcr->rec);
596 dcr->rec = new_record();
597 if (dcr->attached_to_dev) {
598 detach_dcr_from_dev(dcr);
600 /* Use job spoolsize prior to device spoolsize */
601 if (jcr->spool_size) {
602 dcr->max_job_spool_size = jcr->spool_size;
604 dcr->max_job_spool_size = dev->device->max_job_spool_size;
606 dcr->device = dev->device;
608 attach_dcr_to_dev(dcr);
614 * Search the dcrs list for the given dcr. If it is found,
615 * as it should be, then remove it. Also zap the jcr pointer
616 * to the dcr if it is the same one.
618 * Note, this code will be turned on when we can write to multiple
619 * dcrs at the same time.
622 static void remove_dcr_from_dcrs(DCR *dcr)
628 int num = jcr->dcrs->size();
629 for (i=0; i < num; i++) {
630 ldcr = (DCR *)jcr->dcrs->get(i);
632 jcr->dcrs->remove(i);
633 if (jcr->dcr == dcr) {
642 static void attach_dcr_to_dev(DCR *dcr)
644 DEVICE *dev = dcr->dev;
647 if (jcr) Dmsg1(500, "JobId=%u enter attach_dcr_to_dev\n", (uint32_t)jcr->JobId);
648 if (!dcr->attached_to_dev && dev->initiated && jcr && jcr->get_JobType() != JT_SYSTEM) {
649 dev->attached_dcrs->append(dcr); /* attach dcr to device */
650 dcr->attached_to_dev = true;
651 Dmsg1(500, "JobId=%u attach_dcr_to_dev\n", (uint32_t)jcr->JobId);
655 void detach_dcr_from_dev(DCR *dcr)
657 DEVICE *dev = dcr->dev;
658 Dmsg0(500, "Enter detach_dcr_from_dev\n"); /* jcr is NULL in some cases */
660 /* Detach this dcr only if attached */
661 if (dcr->attached_to_dev && dev) {
663 dcr->unreserve_device();
664 dcr->dev->attached_dcrs->remove(dcr); /* detach dcr from device */
665 dcr->attached_to_dev = false;
666 // remove_dcr_from_dcrs(dcr); /* remove dcr from jcr list */
672 * Free up all aspects of the given dcr -- i.e. dechain it,
673 * release allocated memory, zap pointers, ...
675 void free_dcr(DCR *dcr)
679 detach_dcr_from_dev(dcr);
682 free_block(dcr->block);
685 free_record(dcr->rec);
687 if (jcr && jcr->dcr == dcr) {
693 static void set_dcr_from_vol(DCR *dcr, VOL_LIST *vol)
696 * Note, if we want to be able to work from a .bsr file only
697 * for disaster recovery, we must "simulate" reading the catalog
699 bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
700 bstrncpy(dcr->VolCatInfo.VolCatName, vol->VolumeName, sizeof(dcr->VolCatInfo.VolCatName));
701 bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
702 dcr->VolCatInfo.Slot = vol->Slot;
703 dcr->VolCatInfo.InChanger = vol->Slot > 0;