3 * block.c -- tape block handling functions
5 * Kern Sibbald, March MMI
6 * added BB02 format October MMII
12 Copyright (C) 2001-2006 Kern Sibbald
14 This program is free software; you can redistribute it and/or
15 modify it under the terms of the GNU General Public License
16 version 2 as amended with additional clauses defined in the
17 file LICENSE in the main source directory.
19 This program is distributed in the hope that it will be useful,
20 but WITHOUT ANY WARRANTY; without even the implied warranty of
21 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 the file LICENSE for additional details.
30 static bool terminate_writing_volume(DCR *dcr);
31 static bool do_new_file_bookkeeping(DCR *dcr);
32 static bool do_dvd_size_checks(DCR *dcr);
33 static void reread_last_block(DCR *dcr);
36 * Dump the block header, then walk through
37 * the block printing out the record headers.
39 void dump_block(DEV_BLOCK *b, const char *msg)
43 char Id[BLKHDR_ID_LENGTH+1];
44 uint32_t CheckSum, BlockCheckSum;
47 uint32_t VolSessionId, VolSessionTime, data_len;
51 char buf1[100], buf2[100];
53 unser_begin(b->buf, BLKHDR1_LENGTH);
54 unser_uint32(CheckSum);
55 unser_uint32(block_len);
56 unser_uint32(BlockNumber);
57 unser_bytes(Id, BLKHDR_ID_LENGTH);
58 ASSERT(unser_length(b->buf) == BLKHDR1_LENGTH);
59 Id[BLKHDR_ID_LENGTH] = 0;
61 unser_uint32(VolSessionId);
62 unser_uint32(VolSessionTime);
66 VolSessionId = VolSessionTime = 0;
71 if (block_len > 100000) {
72 Dmsg3(20, "Dump block %s 0x%x blocksize too big %u\n", msg, b, block_len);
76 BlockCheckSum = bcrc32((uint8_t *)b->buf+BLKHDR_CS_LENGTH,
77 block_len-BLKHDR_CS_LENGTH);
78 Pmsg6(000, _("Dump block %s %x: size=%d BlkNum=%d\n"
79 " Hdrcksum=%x cksum=%x\n"),
80 msg, b, block_len, BlockNumber, CheckSum, BlockCheckSum);
82 while (p < (b->buf + block_len+WRITE_RECHDR_LENGTH)) {
83 unser_begin(p, WRITE_RECHDR_LENGTH);
84 if (rhl == RECHDR1_LENGTH) {
85 unser_uint32(VolSessionId);
86 unser_uint32(VolSessionTime);
88 unser_int32(FileIndex);
90 unser_uint32(data_len);
91 Pmsg6(000, _(" Rec: VId=%u VT=%u FI=%s Strm=%s len=%d p=%x\n"),
92 VolSessionId, VolSessionTime, FI_to_ascii(buf1, FileIndex),
93 stream_to_ascii(buf2, Stream, FileIndex), data_len, p);
99 * Create a new block structure.
100 * We pass device so that the block can inherit the
101 * min and max block sizes.
103 DEV_BLOCK *new_block(DEVICE *dev)
105 DEV_BLOCK *block = (DEV_BLOCK *)get_memory(sizeof(DEV_BLOCK));
107 memset(block, 0, sizeof(DEV_BLOCK));
109 /* If the user has specified a max_block_size, use it as the default */
110 if (dev->max_block_size == 0) {
111 block->buf_len = DEFAULT_BLOCK_SIZE;
113 block->buf_len = dev->max_block_size;
116 block->block_len = block->buf_len; /* default block size */
117 block->buf = get_memory(block->buf_len);
119 block->BlockVer = BLOCK_VER; /* default write version */
120 Dmsg1(650, "Returning new block=%x\n", block);
126 * Duplicate an existing block (eblock)
128 DEV_BLOCK *dup_block(DEV_BLOCK *eblock)
130 DEV_BLOCK *block = (DEV_BLOCK *)get_memory(sizeof(DEV_BLOCK));
131 int buf_len = sizeof_pool_memory(eblock->buf);
133 memcpy(block, eblock, sizeof(DEV_BLOCK));
134 block->buf = get_memory(buf_len);
135 memcpy(block->buf, eblock->buf, buf_len);
141 * Only the first block checksum error was reported.
142 * If there are more, report it now.
144 void print_block_read_errors(JCR *jcr, DEV_BLOCK *block)
146 if (block->read_errors > 1) {
147 Jmsg(jcr, M_ERROR, 0, _("%d block read errors not printed.\n"),
155 void free_block(DEV_BLOCK *block)
157 Dmsg1(999, "free_block buffer %x\n", block->buf);
158 free_memory(block->buf);
159 Dmsg1(999, "free_block block %x\n", block);
160 free_memory((POOLMEM *)block);
163 /* Empty the block -- for writing */
164 void empty_block(DEV_BLOCK *block)
166 block->binbuf = WRITE_BLKHDR_LENGTH;
167 block->bufp = block->buf + block->binbuf;
169 block->write_failed = false;
170 block->block_read = false;
171 block->FirstIndex = block->LastIndex = 0;
175 * Create block header just before write. The space
176 * in the buffer should have already been reserved by
179 void ser_block_header(DEV_BLOCK *block)
182 uint32_t CheckSum = 0;
183 uint32_t block_len = block->binbuf;
185 Dmsg1(1390, "ser_block_header: block_len=%d\n", block_len);
186 ser_begin(block->buf, BLKHDR2_LENGTH);
187 ser_uint32(CheckSum);
188 ser_uint32(block_len);
189 ser_uint32(block->BlockNumber);
190 ser_bytes(WRITE_BLKHDR_ID, BLKHDR_ID_LENGTH);
191 if (BLOCK_VER >= 2) {
192 ser_uint32(block->VolSessionId);
193 ser_uint32(block->VolSessionTime);
196 /* Checksum whole block except for the checksum */
197 CheckSum = bcrc32((uint8_t *)block->buf+BLKHDR_CS_LENGTH,
198 block_len-BLKHDR_CS_LENGTH);
199 Dmsg1(1390, "ser_bloc_header: checksum=%x\n", CheckSum);
200 ser_begin(block->buf, BLKHDR2_LENGTH);
201 ser_uint32(CheckSum); /* now add checksum to block header */
205 * Unserialize the block header for reading block.
206 * This includes setting all the buffer pointers correctly.
208 * Returns: false on failure (not a block)
211 static bool unser_block_header(JCR *jcr, DEVICE *dev, DEV_BLOCK *block)
214 char Id[BLKHDR_ID_LENGTH+1];
215 uint32_t CheckSum, BlockCheckSum;
218 uint32_t BlockNumber;
221 unser_begin(block->buf, BLKHDR_LENGTH);
222 unser_uint32(CheckSum);
223 unser_uint32(block_len);
224 unser_uint32(BlockNumber);
225 unser_bytes(Id, BLKHDR_ID_LENGTH);
226 ASSERT(unser_length(block->buf) == BLKHDR1_LENGTH);
228 Id[BLKHDR_ID_LENGTH] = 0;
230 bhl = BLKHDR1_LENGTH;
232 block->bufp = block->buf + bhl;
233 if (strncmp(Id, BLKHDR1_ID, BLKHDR_ID_LENGTH) != 0) {
234 dev->dev_errno = EIO;
235 Mmsg4(dev->errmsg, _("Volume data error at %u:%u! Wanted ID: \"%s\", got \"%s\". Buffer discarded.\n"),
236 dev->file, dev->block_num, BLKHDR1_ID, Id);
237 if (block->read_errors == 0 || verbose >= 2) {
238 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
240 block->read_errors++;
243 } else if (Id[3] == '2') {
244 unser_uint32(block->VolSessionId);
245 unser_uint32(block->VolSessionTime);
246 bhl = BLKHDR2_LENGTH;
248 block->bufp = block->buf + bhl;
249 if (strncmp(Id, BLKHDR2_ID, BLKHDR_ID_LENGTH) != 0) {
250 dev->dev_errno = EIO;
251 Mmsg4(dev->errmsg, _("Volume data error at %u:%u! Wanted ID: \"%s\", got \"%s\". Buffer discarded.\n"),
252 dev->file, dev->block_num, BLKHDR2_ID, Id);
253 if (block->read_errors == 0 || verbose >= 2) {
254 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
256 block->read_errors++;
260 dev->dev_errno = EIO;
261 Mmsg4(dev->errmsg, _("Volume data error at %u:%u! Wanted ID: \"%s\", got \"%s\". Buffer discarded.\n"),
262 dev->file, dev->block_num, BLKHDR2_ID, Id);
263 if (block->read_errors == 0 || verbose >= 2) {
264 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
266 block->read_errors++;
267 unser_uint32(block->VolSessionId);
268 unser_uint32(block->VolSessionTime);
273 if (block_len > MAX_BLOCK_LENGTH) {
274 dev->dev_errno = EIO;
275 Mmsg3(dev->errmsg, _("Volume data error at %u:%u! Block length %u is insane (too large), probably due to a bad archive.\n"),
276 dev->file, dev->block_num, block_len);
277 if (block->read_errors == 0 || verbose >= 2) {
278 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
280 block->read_errors++;
284 Dmsg1(390, "unser_block_header block_len=%d\n", block_len);
285 /* Find end of block or end of buffer whichever is smaller */
286 if (block_len > block->read_len) {
287 block_end = block->read_len;
289 block_end = block_len;
291 block->binbuf = block_end - bhl;
292 block->block_len = block_len;
293 block->BlockNumber = BlockNumber;
294 Dmsg3(390, "Read binbuf = %d %d block_len=%d\n", block->binbuf,
296 if (block_len <= block->read_len) {
297 BlockCheckSum = bcrc32((uint8_t *)block->buf+BLKHDR_CS_LENGTH,
298 block_len-BLKHDR_CS_LENGTH);
299 if (BlockCheckSum != CheckSum) {
300 dev->dev_errno = EIO;
301 Mmsg6(dev->errmsg, _("Volume data error at %u:%u!\n"
302 "Block checksum mismatch in block=%u len=%d: calc=%x blk=%x\n"),
303 dev->file, dev->block_num, (unsigned)BlockNumber,
304 block_len, BlockCheckSum, CheckSum);
305 if (block->read_errors == 0 || verbose >= 2) {
306 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
308 block->read_errors++;
318 * Write a block to the device, with locking and unlocking
320 * Returns: true on success
324 bool write_block_to_device(DCR *dcr)
327 DEVICE *dev = dcr->dev;
331 stat = write_block_to_spool_file(dcr);
335 if (!dcr->dev_locked) {
340 * If a new volume has been mounted since our last write
341 * Create a JobMedia record for the previous volume written,
342 * and set new parameters to write this volume
343 * The same applies for if we are in a new file.
345 if (dcr->NewVol || dcr->NewFile) {
346 if (job_canceled(jcr)) {
350 /* Create a jobmedia record for this job */
351 if (!dir_create_jobmedia_record(dcr)) {
352 dev->dev_errno = EIO;
353 Jmsg(jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
354 dcr->VolCatInfo.VolCatName, jcr->Job);
355 set_new_volume_parameters(dcr);
360 /* Note, setting a new volume also handles any pending new file */
361 set_new_volume_parameters(dcr);
362 dcr->NewFile = false; /* this handled for new file too */
364 set_new_file_parameters(dcr);
368 if (!write_block_to_dev(dcr)) {
369 if (job_canceled(jcr) || jcr->JobType == JT_SYSTEM) {
372 stat = fixup_device_block_write_error(dcr);
377 if (!dcr->dev_locked) {
384 * Write a block to the device
386 * Returns: true on success or EOT
387 * false on hard error
389 bool write_block_to_dev(DCR *dcr)
392 uint32_t wlen; /* length to write */
393 int hit_max1, hit_max2;
395 DEVICE *dev = dcr->dev;
397 DEV_BLOCK *block = dcr->block;
399 #ifdef NO_TAPE_WRITE_TEST
403 ASSERT(block->binbuf == ((uint32_t) (block->bufp - block->buf)));
405 /* dump_block(block, "before write"); */
406 if (dev->at_weot()) {
407 Dmsg0(100, "return write_block_to_dev with ST_WEOT\n");
408 dev->dev_errno = ENOSPC;
409 Jmsg(jcr, M_FATAL, 0, _("Cannot write block. Device at EOM.\n"));
412 if (!dev->can_append()) {
413 dev->dev_errno = EIO;
414 Jmsg(jcr, M_FATAL, 0, _("Attempt to write on read-only Volume.\n"));
417 wlen = block->binbuf;
418 if (wlen <= WRITE_BLKHDR_LENGTH) { /* Does block have data in it? */
419 Dmsg0(100, "return write_block_to_dev no data to write\n");
423 * Clear to the end of the buffer if it is not full,
424 * and on tape devices, apply min and fixed blocking.
426 if (wlen != block->buf_len) {
427 uint32_t blen; /* current buffer length */
429 Dmsg2(200, "binbuf=%d buf_len=%d\n", block->binbuf, block->buf_len);
432 /* Adjust write size to min/max for tapes only */
433 if (dev->is_tape()) {
434 /* check for fixed block size */
435 if (dev->min_block_size == dev->max_block_size) {
436 wlen = block->buf_len; /* fixed block size already rounded */
437 /* Check for min block size */
438 } else if (wlen < dev->min_block_size) {
439 wlen = ((dev->min_block_size + TAPE_BSIZE - 1) / TAPE_BSIZE) * TAPE_BSIZE;
440 /* Ensure size is rounded */
442 wlen = ((wlen + TAPE_BSIZE - 1) / TAPE_BSIZE) * TAPE_BSIZE;
446 memset(block->bufp, 0, wlen-blen); /* clear garbage */
450 ser_block_header(block);
452 /* Limit maximum Volume size to value specified by user */
453 hit_max1 = (dev->max_volume_size > 0) &&
454 ((dev->VolCatInfo.VolCatBytes + block->binbuf)) >= dev->max_volume_size;
455 hit_max2 = (dev->VolCatInfo.VolCatMaxBytes > 0) &&
456 ((dev->VolCatInfo.VolCatBytes + block->binbuf)) >= dev->VolCatInfo.VolCatMaxBytes;
457 if (hit_max1 || hit_max2) {
460 Dmsg0(10, "==== Output bytes Triggered medium max capacity.\n");
462 max_cap = dev->max_volume_size;
464 max_cap = dev->VolCatInfo.VolCatMaxBytes;
466 Jmsg(jcr, M_INFO, 0, _("User defined maximum volume capacity %s exceeded on device %s.\n"),
467 edit_uint64_with_commas(max_cap, ed1), dev->print_name());
468 terminate_writing_volume(dcr);
469 reread_last_block(dcr); /* DEBUG */
470 dev->dev_errno = ENOSPC;
474 /* Limit maximum File size on volume to user specified value */
475 if ((dev->max_file_size > 0) &&
476 (dev->file_size+block->binbuf) >= dev->max_file_size) {
477 dev->file_size = 0; /* reset file size */
479 if (!dev->weof(1)) { /* write eof */
480 Dmsg0(190, "WEOF error in max file size.\n");
481 Jmsg(jcr, M_FATAL, 0, _("Unable to write EOF. ERR=%s\n"),
483 terminate_writing_volume(dcr);
484 dev->dev_errno = ENOSPC;
487 if (!write_ansi_ibm_labels(dcr, ANSI_EOF_LABEL, dev->VolHdr.VolumeName)) {
491 if (!do_new_file_bookkeeping(dcr)) {
492 /* Error message already sent */
497 if (!do_dvd_size_checks(dcr)) {
498 /* Error message already sent */
502 dev->VolCatInfo.VolCatWrites++;
503 Dmsg1(1300, "Write block of %u bytes\n", wlen);
504 #ifdef DEBUG_BLOCK_ZEROING
505 uint32_t *bp = (uint32_t *)block->buf;
506 if (bp[0] == 0 && bp[1] == 0 && bp[2] == 0 && block->buf[12] == 0) {
507 Jmsg0(jcr, M_ABORT, 0, _("Write block header zeroed.\n"));
512 * Do write here, make a somewhat feeble attempt to recover from
513 * I/O errors, or from the OS telling us it is busy.
517 if (dev->is_tape()) {
518 stat = tape_write(dev->fd, block->buf, (size_t)wlen);
520 stat = write(dev->fd, block->buf, (size_t)wlen);
523 bmicrosleep(0, 100000); /* pause a bit if lots of errors */
525 } while (stat == -1 && (errno == EBUSY || errno == EIO) && retry++ < 30);
527 #ifdef DEBUG_BLOCK_ZEROING
528 if (bp[0] == 0 && bp[1] == 0 && bp[2] == 0 && block->buf[12] == 0) {
529 Jmsg0(jcr, M_ABORT, 0, _("Write block header zeroed.\n"));
533 if (stat != (ssize_t)wlen) {
534 /* Some devices simply report EIO when the volume is full.
535 * With a little more thought we may be able to check
536 * capacity and distinguish real errors and EOT
537 * conditions. In any case, we probably want to
538 * simulate an End of Medium.
543 if (dev->dev_errno == 0) {
544 dev->dev_errno = ENOSPC; /* out of space */
546 if (dev->dev_errno != ENOSPC) {
547 Jmsg4(jcr, M_ERROR, 0, _("Write error at %u:%u on device %s. ERR=%s.\n"),
548 dev->file, dev->block_num, dev->print_name(), be.strerror());
551 dev->dev_errno = ENOSPC; /* out of space */
553 if (dev->dev_errno == ENOSPC) {
554 Jmsg(jcr, M_INFO, 0, _("End of Volume \"%s\" at %u:%u on device %s. Write of %u bytes got %d.\n"),
555 dev->VolCatInfo.VolCatName,
556 dev->file, dev->block_num, dev->print_name(), wlen, stat);
558 Dmsg7(100, "=== Write error. fd=%d size=%u rtn=%d dev_blk=%d blk_blk=%d errno=%d: ERR=%s\n",
559 dev->fd, wlen, stat, dev->block_num, block->BlockNumber,
560 dev->dev_errno, strerror(dev->dev_errno));
562 ok = terminate_writing_volume(dcr);
563 if (!ok && !forge_on) {
567 reread_last_block(dcr);
572 /* We successfully wrote the block, now do housekeeping */
574 dev->VolCatInfo.VolCatBytes += block->binbuf;
575 dev->VolCatInfo.VolCatBlocks++;
576 dev->EndBlock = dev->block_num;
577 dev->EndFile = dev->file;
578 block->BlockNumber++;
580 /* Update dcr values */
581 if (dev->is_tape()) {
582 dcr->EndBlock = dev->EndBlock;
583 dcr->EndFile = dev->EndFile;
586 /* Save address of block just written */
587 uint64_t addr = dev->file_addr + wlen - 1;
588 dcr->EndBlock = (uint32_t)addr;
589 dcr->EndFile = (uint32_t)(addr >> 32);
590 dev->block_num = dcr->EndBlock;
591 dev->file = dcr->EndFile;
593 if (dcr->VolFirstIndex == 0 && block->FirstIndex > 0) {
594 dcr->VolFirstIndex = block->FirstIndex;
596 if (block->LastIndex > 0) {
597 dcr->VolLastIndex = block->LastIndex;
599 dcr->WroteVol = true;
600 dev->file_addr += wlen; /* update file address */
601 dev->file_size += wlen;
602 dev->part_size += wlen;
604 Dmsg2(1300, "write_block: wrote block %d bytes=%d\n", dev->block_num, wlen);
609 static void reread_last_block(DCR *dcr)
611 #define CHECK_LAST_BLOCK
612 #ifdef CHECK_LAST_BLOCK
614 DEVICE *dev = dcr->dev;
616 DEV_BLOCK *block = dcr->block;
618 * If the device is a tape and it supports backspace record,
619 * we backspace over one or two eof marks depending on
620 * how many we just wrote, then over the last record,
621 * then re-read it and verify that the block number is
624 if (dev->is_tape() && dev_cap(dev, CAP_BSR)) {
625 /* Now back up over what we wrote and read the last block */
629 Jmsg(jcr, M_ERROR, 0, _("Backspace file at EOT failed. ERR=%s\n"),
630 be.strerror(dev->dev_errno));
632 if (ok && dev->has_cap(CAP_TWOEOF) && !dev->bsf(1)) {
635 Jmsg(jcr, M_ERROR, 0, _("Backspace file at EOT failed. ERR=%s\n"),
636 be.strerror(dev->dev_errno));
638 /* Backspace over record */
639 if (ok && !dev->bsr(1)) {
642 Jmsg(jcr, M_ERROR, 0, _("Backspace record at EOT failed. ERR=%s\n"),
643 be.strerror(dev->dev_errno));
645 * On FreeBSD systems, if the user got here, it is likely that his/her
646 * tape drive is "frozen". The correct thing to do is a
647 * rewind(), but if we do that, higher levels in cleaning up, will
648 * most likely write the EOS record over the beginning of the
649 * tape. The rewind *is* done later in mount.c when another
650 * tape is requested. Note, the clrerror_dev() call in bsr()
651 * calls ioctl(MTCERRSTAT), which *should* fix the problem.
655 DEV_BLOCK *lblock = new_block(dev);
656 /* Note, this can destroy dev->errmsg */
658 if (!read_block_from_dev(dcr, NO_BLOCK_NUMBER_CHECK)) {
659 Jmsg(jcr, M_ERROR, 0, _("Re-read last block at EOT failed. ERR=%s"),
663 * If we wrote block and the block numbers don't agree
664 * we have a possible problem.
666 if (lblock->VolSessionId == block->VolSessionId &&
667 lblock->BlockNumber+1 != block->BlockNumber) {
668 Jmsg(jcr, M_ERROR, 0, _(
669 "Re-read of last block OK, but block numbers differ. Last block=%u Current block=%u.\n"),
670 lblock->BlockNumber, block->BlockNumber);
672 Jmsg(jcr, M_INFO, 0, _("Re-read of last block succeeded.\n"));
682 static bool terminate_writing_volume(DCR *dcr)
684 DEVICE *dev = dcr->dev;
687 /* Create a JobMedia record to indicated end of tape */
688 dev->VolCatInfo.VolCatFiles = dev->file;
689 if (!dir_create_jobmedia_record(dcr)) {
690 Dmsg0(190, "Error from create JobMedia\n");
691 dev->dev_errno = EIO;
692 Jmsg(dcr->jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
693 dcr->VolCatInfo.VolCatName, dcr->jcr->Job);
697 dcr->block->write_failed = true;
698 if (!dev->weof(1)) { /* end the tape */
699 dev->VolCatInfo.VolCatErrors++;
700 Jmsg(dcr->jcr, M_ERROR, 0, _("Error writing final EOF to tape. This Volume may not be readable.\n"
703 Dmsg0(100, "WEOF error.\n");
706 ok = write_ansi_ibm_labels(dcr, ANSI_EOV_LABEL, dev->VolHdr.VolumeName);
708 bstrncpy(dev->VolCatInfo.VolCatStatus, "Full", sizeof(dev->VolCatInfo.VolCatStatus));
709 dev->VolCatInfo.VolCatFiles = dev->file; /* set number of files */
710 dev->VolCatInfo.VolCatJobs++; /* increment number of jobs */
713 if (!dvd_write_part(dcr)) { /* write last part */
714 dev->VolCatInfo.VolCatErrors++;
715 Jmsg(dcr->jcr, M_FATAL, 0, _("Error writing final part to DVD. "
716 "This Volume may not be readable.\n%s"),
719 Dmsg0(100, "dvd_write_part error.\n");
721 dev->VolCatInfo.VolCatParts = dev->num_dvd_parts;
724 if (!dir_update_volume_info(dcr, false)) {
727 Dmsg1(100, "dir_update_volume_info terminate writing -- %s\n", ok?"OK":"ERROR");
730 * Walk through all attached dcrs setting flag to call
731 * set_new_file_parameters() when that dcr is next used.
734 foreach_dlist(mdcr, dev->attached_dcrs) {
735 if (mdcr->jcr->JobId == 0) {
738 mdcr->NewFile = true; /* set reminder to do set_new_file_params */
740 /* Set new file/block parameters for current dcr */
741 set_new_file_parameters(dcr);
743 if (ok && dev_cap(dev, CAP_TWOEOF) && !dev->weof(1)) { /* end the tape */
744 dev->VolCatInfo.VolCatErrors++;
745 /* This may not be fatal since we already wrote an EOF */
746 Jmsg(dcr->jcr, M_ERROR, 0, "%s", dev->errmsg);
749 dev->set_ateot(); /* no more writing this tape */
750 Dmsg1(100, "Leave terminate_writing_volume -- %s\n", ok?"OK":"ERROR");
755 * Do bookkeeping when a new file is created on a Volume. This is
756 * also done for disk files to generate the jobmedia records for
759 static bool do_new_file_bookkeeping(DCR *dcr)
761 DEVICE *dev = dcr->dev;
764 /* Create a JobMedia record so restore can seek */
765 if (!dir_create_jobmedia_record(dcr)) {
766 Dmsg0(190, "Error from create_job_media.\n");
767 dev->dev_errno = EIO;
768 Jmsg(jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
769 dcr->VolCatInfo.VolCatName, jcr->Job);
770 terminate_writing_volume(dcr);
771 dev->dev_errno = EIO;
774 dev->VolCatInfo.VolCatFiles = dev->file;
775 if (!dir_update_volume_info(dcr, false)) {
776 Dmsg0(190, "Error from update_vol_info.\n");
777 terminate_writing_volume(dcr);
778 dev->dev_errno = EIO;
781 Dmsg0(100, "dir_update_volume_info max file size -- OK\n");
784 * Walk through all attached dcrs setting flag to call
785 * set_new_file_parameters() when that dcr is next used.
788 foreach_dlist(mdcr, dev->attached_dcrs) {
789 if (mdcr->jcr->JobId == 0) {
792 mdcr->NewFile = true; /* set reminder to do set_new_file_params */
794 /* Set new file/block parameters for current dcr */
795 set_new_file_parameters(dcr);
800 * Do all checks for DVD sizes during writing.
802 static bool do_dvd_size_checks(DCR *dcr)
804 DEVICE *dev = dcr->dev;
806 DEV_BLOCK *block = dcr->block;
808 /* Don't go further if the device is not a dvd */
809 if (!dev->is_dvd()) {
813 /* Limit maximum part size to value specified by user
815 if (dev->max_part_size > 0 && ((dev->part_size + block->binbuf) >= dev->max_part_size)) {
816 if (dev->part < dev->num_dvd_parts) {
817 Jmsg3(dcr->jcr, M_FATAL, 0, _("Error while writing, current part number"
818 " is less than the total number of parts (%d/%d, device=%s)\n"),
819 dev->part, dev->num_dvd_parts, dev->print_name());
820 dev->dev_errno = EIO;
824 if (dvd_open_next_part(dcr) < 0) {
825 Jmsg2(dcr->jcr, M_FATAL, 0, _("Unable to open device next part %s: ERR=%s\n"),
826 dev->print_name(), dev->bstrerror());
827 dev->dev_errno = EIO;
831 dev->VolCatInfo.VolCatParts = dev->num_dvd_parts;
833 if (!dir_update_volume_info(dcr, false)) {
834 Dmsg0(190, "Error from update_vol_info.\n");
835 dev->dev_errno = EIO;
840 if (!dev->is_freespace_ok()) { /* Error while getting free space */
841 char ed1[50], ed2[50];
842 Dmsg1(10, "Cannot get free space on the device ERR=%s.\n", dev->errmsg);
843 Jmsg(jcr, M_FATAL, 0, _("End of Volume \"%s\" at %u:%u on device %s "
844 "(part_size=%s, free_space=%s, free_space_errno=%d, errmsg=%s).\n"),
845 dev->VolCatInfo.VolCatName,
846 dev->file, dev->block_num, dev->print_name(),
847 edit_uint64_with_commas(dev->part_size, ed1), edit_uint64_with_commas(dev->free_space, ed2),
848 dev->free_space_errno, dev->errmsg);
849 dev->dev_errno = dev->free_space_errno;
853 if ((dev->is_freespace_ok() && (dev->part_size + block->binbuf) >= dev->free_space)) {
854 char ed1[50], ed2[50];
855 Dmsg0(10, "==== Just enough free space on the device to write the current part...\n");
856 Jmsg(jcr, M_INFO, 0, _("End of Volume \"%s\" at %u:%u on device %s "
857 "(part_size=%s, free_space=%s, free_space_errno=%d).\n"),
858 dev->VolCatInfo.VolCatName,
859 dev->file, dev->block_num, dev->print_name(),
860 edit_uint64_with_commas(dev->part_size, ed1), edit_uint64_with_commas(dev->free_space, ed2),
861 dev->free_space_errno);
862 terminate_writing_volume(dcr);
863 dev->dev_errno = ENOSPC;
871 * Read block with locking
874 bool read_block_from_device(DCR *dcr, bool check_block_numbers)
877 DEVICE *dev = dcr->dev;
878 Dmsg0(200, "Enter read_block_from_device\n");
880 ok = read_block_from_dev(dcr, check_block_numbers);
882 Dmsg0(200, "Leave read_block_from_device\n");
887 * Read the next block into the block structure and unserialize
888 * the block header. For a file, the block may be partially
889 * or completely in the current buffer.
891 bool read_block_from_dev(DCR *dcr, bool check_block_numbers)
895 uint32_t BlockNumber;
898 DEVICE *dev = dcr->dev;
899 DEV_BLOCK *block = dcr->block;
905 Dmsg1(200, "Full read() in read_block_from_device() len=%d\n",
909 dev->dev_errno = EIO;
910 Mmsg1(dev->errmsg, _("Block buffer size looping problem on device %s\n"),
912 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
917 /*Dmsg1(100, "dev->file_size=%u\n",(unsigned int)dev->file_size);
918 Dmsg1(100, "dev->file_addr=%u\n",(unsigned int)dev->file_addr);
919 Dmsg1(100, "lseek=%u\n",(unsigned int)lseek(dev->fd, 0, SEEK_CUR));
920 Dmsg1(100, "dev->part_start=%u\n",(unsigned int)dev->part_start);
921 Dmsg1(100, "dev->file_addr-dev->part_start=%u\n",(unsigned int)dev->file_addr-dev->part_start);
922 Dmsg1(100, "dev->file_size-dev->part_start=%u\n",(unsigned int)dev->file_size-dev->part_start);
923 Dmsg1(100, "dev->part_size=%u\n", (unsigned int)dev->part_size);
924 Dmsg1(100, "dev->part=%u\n", (unsigned int)dev->part);
925 Dmsg1(100, "dev->num_dvd_parts=%u\n", (unsigned int)dev->num_dvd_parts);
926 Dmsg1(100, "dev->VolCatInfo.VolCatParts=%u\n", (unsigned int)dev->VolCatInfo.VolCatParts);
927 Dmsg3(100, "Tests : %d %d %d\n", (dev->VolCatInfo.VolCatParts > 0),
928 ((dev->file_addr-dev->part_start) == dev->part_size),
929 (dev->part <= dev->VolCatInfo.VolCatParts));*/
931 /* Check for DVD part file end */
932 if (dev->at_eof() && dev->is_dvd() && dev->num_dvd_parts > 0 &&
933 dev->part < dev->num_dvd_parts) {
934 Dmsg0(400, "Call dvd_open_next_part\n");
935 if (dvd_open_next_part(dcr) < 0) {
936 Jmsg3(dcr->jcr, M_FATAL, 0, _("Unable to open device part=%d %s: ERR=%s\n"),
937 dev->part, dev->print_name(), dev->bstrerror());
938 dev->dev_errno = EIO;
945 // uint32_t *bp = (uint32_t *)block->buf;
946 // Pmsg3(000, "Read %p %u at %llu\n", block->buf, block->buf_len, lseek(dev->fd, 0, SEEK_CUR));
948 if (dev->is_tape()) {
949 stat = tape_read(dev->fd, block->buf, (size_t)block->buf_len);
951 stat = read(dev->fd, block->buf, (size_t)block->buf_len);
954 // Pmsg8(000, "stat=%d Csum=%u blen=%u bnum=%u %c%c%c%c\n",stat, bp[0],bp[1],bp[2],
955 // block->buf[12],block->buf[13],block->buf[14],block->buf[15]);
958 dev->VolCatInfo.VolCatErrors++;
960 } while (stat == -1 && (errno == EINTR || errno == EIO) && retry++ < 11);
964 Dmsg1(200, "Read device got: ERR=%s\n", be.strerror());
966 Mmsg4(dev->errmsg, _("Read error at file:blk %u:%u on device %s. ERR=%s.\n"),
967 dev->file, dev->block_num, dev->print_name(), be.strerror());
968 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
969 if (dev->at_eof()) { /* EOF just seen? */
970 dev->set_eot(); /* yes, error => EOT */
974 Dmsg3(200, "Read device got %d bytes at %u:%u\n", stat,
975 dev->file, dev->block_num);
976 if (stat == 0) { /* Got EOF ! */
979 Mmsg3(dev->errmsg, _("Read zero bytes at %u:%u on device %s.\n"),
980 dev->file, dev->block_num, dev->print_name());
981 if (dev->at_eof()) { /* EOF already read? */
982 dev->set_eot(); /* yes, 2 EOFs => EOT */
986 return false; /* return eof */
988 /* Continue here for successful read */
989 block->read_len = stat; /* save length read */
990 if (block->read_len < BLKHDR2_LENGTH) {
991 dev->dev_errno = EIO;
992 Mmsg4(dev->errmsg, _("Volume data error at %u:%u! Very short block of %d bytes on device %s discarded.\n"),
993 dev->file, dev->block_num, block->read_len, dev->print_name());
994 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
995 dev->set_short_block();
996 block->read_len = block->binbuf = 0;
997 return false; /* return error */
1000 BlockNumber = block->BlockNumber + 1;
1001 if (!unser_block_header(jcr, dev, block)) {
1003 dev->file_addr += block->read_len;
1004 dev->file_size += block->read_len;
1011 * If the block is bigger than the buffer, we reposition for
1012 * re-reading the block, allocate a buffer of the correct size,
1015 if (block->block_len > block->buf_len) {
1016 dev->dev_errno = EIO;
1017 Mmsg2(dev->errmsg, _("Block length %u is greater than buffer %u. Attempting recovery.\n"),
1018 block->block_len, block->buf_len);
1019 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
1020 Pmsg1(000, "%s", dev->errmsg);
1021 /* Attempt to reposition to re-read the block */
1022 if (dev->is_tape()) {
1023 Dmsg0(200, "BSR for reread; block too big for buffer.\n");
1025 Jmsg(jcr, M_ERROR, 0, "%s", dev->bstrerror());
1026 block->read_len = 0;
1030 Dmsg0(200, "Seek to beginning of block for reread.\n");
1031 off_t pos = lseek_dev(dev, (off_t)0, SEEK_CUR); /* get curr pos */
1032 pos -= block->read_len;
1033 lseek_dev(dev, pos, SEEK_SET);
1034 dev->file_addr = pos;
1036 Mmsg1(dev->errmsg, _("Setting block buffer size to %u bytes.\n"), block->block_len);
1037 Jmsg(jcr, M_INFO, 0, "%s", dev->errmsg);
1038 Pmsg1(000, "%s", dev->errmsg);
1039 /* Set new block length */
1040 dev->max_block_size = block->block_len;
1041 block->buf_len = block->block_len;
1042 free_memory(block->buf);
1043 block->buf = get_memory(block->buf_len);
1046 goto reread; /* re-read block with correct block size */
1049 if (block->block_len > block->read_len) {
1050 dev->dev_errno = EIO;
1051 Mmsg4(dev->errmsg, _("Volume data error at %u:%u! Short block of %d bytes on device %s discarded.\n"),
1052 dev->file, dev->block_num, block->read_len, dev->print_name());
1053 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
1054 dev->set_short_block();
1055 block->read_len = block->binbuf = 0;
1056 return false; /* return error */
1059 dev->clear_short_block();
1061 dev->VolCatInfo.VolCatReads++;
1062 dev->VolCatInfo.VolCatRBytes += block->read_len;
1064 dev->VolCatInfo.VolCatBytes += block->block_len;
1065 dev->VolCatInfo.VolCatBlocks++;
1066 dev->EndBlock = dev->block_num;
1067 dev->EndFile = dev->file;
1070 /* Update dcr values */
1071 if (dev->is_tape()) {
1072 dcr->EndBlock = dev->EndBlock;
1073 dcr->EndFile = dev->EndFile;
1075 uint64_t addr = dev->file_addr + block->read_len - 1;
1076 dcr->EndBlock = (uint32_t)addr;
1077 dcr->EndFile = (uint32_t)(addr >> 32);
1078 dev->block_num = dcr->EndBlock;
1079 dev->file = dcr->EndFile;
1081 dev->file_addr += block->read_len;
1082 dev->file_size += block->read_len;
1085 * If we read a short block on disk,
1086 * seek to beginning of next block. This saves us
1087 * from shuffling blocks around in the buffer. Take a
1088 * look at this from an efficiency stand point later, but
1089 * it should only happen once at the end of each job.
1091 * I've been lseek()ing negative relative to SEEK_CUR for 30
1092 * years now. However, it seems that with the new off_t definition,
1093 * it is not possible to seek negative amounts, so we use two
1094 * lseek(). One to get the position, then the second to do an
1095 * absolute positioning -- so much for efficiency. KES Sep 02.
1097 Dmsg0(200, "At end of read block\n");
1098 if (block->read_len > block->block_len && !dev->is_tape()) {
1100 off_t pos = lseek_dev(dev, (off_t)0, SEEK_CUR); /* get curr pos */
1101 Dmsg1(200, "Current lseek pos=%s\n", edit_int64(pos, ed1));
1102 pos -= (block->read_len - block->block_len);
1103 lseek_dev(dev, pos, SEEK_SET);
1104 Dmsg3(200, "Did lseek pos=%s blk_size=%d rdlen=%d\n",
1105 edit_int64(pos, ed1), block->block_len,
1107 dev->file_addr = pos;
1108 dev->file_size = pos;
1110 Dmsg2(200, "Exit read_block read_len=%d block_len=%d\n",
1111 block->read_len, block->block_len);
1112 block->block_read = true;