3 * block.c -- tape block handling functions
5 * Kern Sibbald, March MMI
6 * added BB02 format October MMII
12 Copyright (C) 2000-2003 Kern Sibbald and John Walker
14 This program is free software; you can redistribute it and/or
15 modify it under the terms of the GNU General Public License as
16 published by the Free Software Foundation; either version 2 of
17 the License, or (at your option) any later version.
19 This program is distributed in the hope that it will be useful,
20 but WITHOUT ANY WARRANTY; without even the implied warranty of
21 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
22 General Public License for more details.
24 You should have received a copy of the GNU General Public
25 License along with this program; if not, write to the Free
26 Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
35 extern int debug_level;
38 * Dump the block header, then walk through
39 * the block printing out the record headers.
41 void dump_block(DEV_BLOCK *b, char *msg)
45 char Id[BLKHDR_ID_LENGTH+1];
46 uint32_t CheckSum, BlockCheckSum;
49 uint32_t VolSessionId, VolSessionTime, data_len;
54 unser_begin(b->buf, BLKHDR1_LENGTH);
55 unser_uint32(CheckSum);
56 unser_uint32(block_len);
57 unser_uint32(BlockNumber);
58 unser_bytes(Id, BLKHDR_ID_LENGTH);
59 ASSERT(unser_length(b->buf) == BLKHDR1_LENGTH);
60 Id[BLKHDR_ID_LENGTH] = 0;
62 unser_uint32(VolSessionId);
63 unser_uint32(VolSessionTime);
67 VolSessionId = VolSessionTime = 0;
72 if (block_len > 100000) {
73 Dmsg3(20, "Dump block %s 0x%x blocksize too big %u\n", msg, b, block_len);
77 BlockCheckSum = bcrc32((uint8_t *)b->buf+BLKHDR_CS_LENGTH,
78 block_len-BLKHDR_CS_LENGTH);
79 Pmsg6(000, "Dump block %s %x: size=%d BlkNum=%d\n\
80 Hdrcksum=%x cksum=%x\n",
81 msg, b, block_len, BlockNumber, CheckSum, BlockCheckSum);
83 while (p < (b->buf + block_len+WRITE_RECHDR_LENGTH)) {
84 unser_begin(p, WRITE_RECHDR_LENGTH);
85 if (rhl == RECHDR1_LENGTH) {
86 unser_uint32(VolSessionId);
87 unser_uint32(VolSessionTime);
89 unser_int32(FileIndex);
91 unser_uint32(data_len);
92 Pmsg6(000, " Rec: VId=%u VT=%u FI=%s Strm=%s len=%d p=%x\n",
93 VolSessionId, VolSessionTime, FI_to_ascii(FileIndex),
94 stream_to_ascii(Stream, FileIndex), data_len, p);
100 * Create a new block structure.
101 * We pass device so that the block can inherit the
102 * min and max block sizes.
104 DEV_BLOCK *new_block(DEVICE *dev)
106 DEV_BLOCK *block = (DEV_BLOCK *)get_memory(sizeof(DEV_BLOCK));
108 memset(block, 0, sizeof(DEV_BLOCK));
110 /* If the user has specified a max_block_size, use it as the default */
111 if (dev->max_block_size == 0) {
112 block->buf_len = DEFAULT_BLOCK_SIZE;
114 block->buf_len = dev->max_block_size;
117 block->block_len = block->buf_len; /* default block size */
118 block->buf = get_memory(block->buf_len);
119 if (block->buf == NULL) {
120 Mmsg0(&dev->errmsg, _("Unable to malloc block buffer.\n"));
121 Emsg0(M_FATAL, 0, dev->errmsg);
125 block->BlockVer = BLOCK_VER; /* default write version */
126 Dmsg1(90, "Returning new block=%x\n", block);
131 * Only the first block checksum error was reported.
132 * If there are more, report it now.
134 void print_block_read_errors(JCR *jcr, DEV_BLOCK *block)
136 if (block->read_errors > 1) {
137 Jmsg(jcr, M_ERROR, 0, _("%d block read errors ignored.\n"),
145 void free_block(DEV_BLOCK *block)
147 Dmsg1(199, "free_block buffer %x\n", block->buf);
148 free_memory(block->buf);
149 Dmsg1(199, "free_block block %x\n", block);
150 free_memory((POOLMEM *)block);
153 /* Empty the block -- for writing */
154 void empty_block(DEV_BLOCK *block)
156 block->binbuf = WRITE_BLKHDR_LENGTH;
157 block->bufp = block->buf + block->binbuf;
159 block->write_failed = false;
160 block->block_read = false;
161 block->FirstIndex = block->LastIndex = 0;
165 * Create block header just before write. The space
166 * in the buffer should have already been reserved by
169 static void ser_block_header(DEV_BLOCK *block)
172 uint32_t CheckSum = 0;
173 uint32_t block_len = block->binbuf;
175 Dmsg1(190, "ser_block_header: block_len=%d\n", block_len);
176 ser_begin(block->buf, BLKHDR2_LENGTH);
177 ser_uint32(CheckSum);
178 ser_uint32(block_len);
179 ser_uint32(block->BlockNumber);
180 ser_bytes(WRITE_BLKHDR_ID, BLKHDR_ID_LENGTH);
181 if (BLOCK_VER >= 2) {
182 ser_uint32(block->VolSessionId);
183 ser_uint32(block->VolSessionTime);
186 /* Checksum whole block except for the checksum */
187 CheckSum = bcrc32((uint8_t *)block->buf+BLKHDR_CS_LENGTH,
188 block_len-BLKHDR_CS_LENGTH);
189 Dmsg1(190, "ser_bloc_header: checksum=%x\n", CheckSum);
190 ser_begin(block->buf, BLKHDR2_LENGTH);
191 ser_uint32(CheckSum); /* now add checksum to block header */
195 * Unserialize the block header for reading block.
196 * This includes setting all the buffer pointers correctly.
198 * Returns: 0 on failure (not a block)
201 static int unser_block_header(JCR *jcr, DEVICE *dev, DEV_BLOCK *block)
204 char Id[BLKHDR_ID_LENGTH+1];
205 uint32_t CheckSum, BlockCheckSum;
208 uint32_t BlockNumber;
211 unser_begin(block->buf, BLKHDR_LENGTH);
212 unser_uint32(CheckSum);
213 unser_uint32(block_len);
214 unser_uint32(BlockNumber);
215 unser_bytes(Id, BLKHDR_ID_LENGTH);
216 ASSERT(unser_length(block->buf) == BLKHDR1_LENGTH);
218 Id[BLKHDR_ID_LENGTH] = 0;
220 bhl = BLKHDR1_LENGTH;
222 block->bufp = block->buf + bhl;
223 if (strncmp(Id, BLKHDR1_ID, BLKHDR_ID_LENGTH) != 0) {
224 Mmsg2(&dev->errmsg, _("Buffer ID error. Wanted: %s, got %s. Buffer discarded.\n"),
226 if (block->read_errors == 0 || verbose >= 2) {
227 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
229 block->read_errors++;
232 } else if (Id[3] == '2') {
233 unser_uint32(block->VolSessionId);
234 unser_uint32(block->VolSessionTime);
235 bhl = BLKHDR2_LENGTH;
237 block->bufp = block->buf + bhl;
238 if (strncmp(Id, BLKHDR2_ID, BLKHDR_ID_LENGTH) != 0) {
239 Mmsg2(&dev->errmsg, _("Buffer ID error. Wanted: %s, got %s. Buffer discarded.\n"),
241 if (block->read_errors == 0 || verbose >= 2) {
242 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
244 block->read_errors++;
248 Mmsg1(&dev->errmsg, _("Expected block-id BB01 or BB02, got %s. Buffer discarded.\n"), Id);
249 if (block->read_errors == 0 || verbose >= 2) {
250 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
252 block->read_errors++;
257 if (block_len > MAX_BLOCK_LENGTH) {
258 Mmsg1(&dev->errmsg, _("Block length %u is insane (too large), probably due to a bad archive.\n"),
260 if (block->read_errors == 0 || verbose >= 2) {
261 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
263 block->read_errors++;
267 Dmsg1(190, "unser_block_header block_len=%d\n", block_len);
268 /* Find end of block or end of buffer whichever is smaller */
269 if (block_len > block->read_len) {
270 block_end = block->read_len;
272 block_end = block_len;
274 block->binbuf = block_end - bhl;
275 block->block_len = block_len;
276 block->BlockNumber = BlockNumber;
277 Dmsg3(190, "Read binbuf = %d %d block_len=%d\n", block->binbuf,
279 if (block_len <= block->read_len) {
280 BlockCheckSum = bcrc32((uint8_t *)block->buf+BLKHDR_CS_LENGTH,
281 block_len-BLKHDR_CS_LENGTH);
282 if (BlockCheckSum != CheckSum) {
283 Mmsg3(&dev->errmsg, _("Block checksum mismatch in block %u: calc=%x blk=%x\n"),
284 (unsigned)BlockNumber, BlockCheckSum, CheckSum);
285 if (block->read_errors == 0 || verbose >= 2) {
286 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
288 block->read_errors++;
296 * Write a block to the device, with locking and unlocking
298 * Returns: 1 on success
302 int write_block_to_device(JCR *jcr, DEVICE *dev, DEV_BLOCK *block)
308 * If a new volume has been mounted since our last write
309 * Create a JobMedia record for the previous volume written,
310 * and set new parameters to write this volume
311 * The saem applies for if we are in a new file.
313 if (jcr->NewVol || jcr->NewFile) {
314 /* Create a jobmedia record for this job */
315 if (!dir_create_jobmedia_record(jcr)) {
316 Jmsg(jcr, M_ERROR, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
317 jcr->VolCatInfo.VolCatName, jcr->Job);
318 set_new_volume_parameters(jcr, dev);
323 /* Note, setting a new volume also handles any pending new file */
324 set_new_volume_parameters(jcr, dev);
325 jcr->NewFile = false; /* this handled for new file too */
327 set_new_file_parameters(jcr, dev);
331 if (!write_block_to_dev(jcr, dev, block)) {
332 stat = fixup_device_block_write_error(jcr, dev, block);
340 * Write a block to the device
342 * Returns: 1 on success or EOT
345 int write_block_to_dev(JCR *jcr, DEVICE *dev, DEV_BLOCK *block)
348 uint32_t wlen; /* length to write */
349 int hit_max1, hit_max2;
352 #ifdef NO_TAPE_WRITE_TEST
356 ASSERT(block->binbuf == ((uint32_t) (block->bufp - block->buf)));
358 /* dump_block(block, "before write"); */
359 if (dev->state & ST_WEOT) {
360 Dmsg0(100, "return write_block_to_dev with ST_WEOT\n");
361 Jmsg(jcr, M_FATAL, 0, _("Cannot write block. Device at EOM.\n"));
364 wlen = block->binbuf;
365 if (wlen <= WRITE_BLKHDR_LENGTH) { /* Does block have data in it? */
366 Dmsg0(100, "return write_block_to_dev no data to write\n");
370 * Clear to the end of the buffer if it is not full,
371 * and on tape devices, apply min and fixed blocking.
373 if (wlen != block->buf_len) {
374 uint32_t blen; /* current buffer length */
376 Dmsg2(200, "binbuf=%d buf_len=%d\n", block->binbuf, block->buf_len);
379 /* Adjust write size to min/max for tapes only */
380 if (dev->state & ST_TAPE) {
381 if (wlen < dev->min_block_size) {
382 wlen = ((dev->min_block_size + TAPE_BSIZE - 1) / TAPE_BSIZE) * TAPE_BSIZE;
384 /* check for fixed block size */
385 if (dev->min_block_size == dev->max_block_size) {
386 wlen = block->buf_len; /* fixed block size already rounded */
390 memset(block->bufp, 0, wlen-blen); /* clear garbage */
394 ser_block_header(block);
396 /* Limit maximum Volume size to value specified by user */
397 hit_max1 = (dev->max_volume_size > 0) &&
398 ((dev->VolCatInfo.VolCatBytes + block->binbuf)) >= dev->max_volume_size;
399 hit_max2 = (dev->VolCatInfo.VolCatMaxBytes > 0) &&
400 ((dev->VolCatInfo.VolCatBytes + block->binbuf)) >= dev->VolCatInfo.VolCatMaxBytes;
401 if (hit_max1 || hit_max2) {
404 Dmsg0(10, "==== Output bytes Triggered medium max capacity.\n");
406 max_cap = dev->max_volume_size;
408 max_cap = dev->VolCatInfo.VolCatMaxBytes;
410 Jmsg(jcr, M_INFO, 0, _("User defined maximum volume capacity %s exceeded on device %s.\n"),
411 edit_uint64(max_cap, ed1), dev->dev_name);
412 block->write_failed = true;
413 if (weof_dev(dev, 1) != 0) { /* end tape */
414 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
416 /* Don't do update after second EOF or file count will be wrong */
417 Dmsg0(100, "dir_update_volume_info\n");
418 dir_update_volume_info(jcr, dev, 0);
419 if (dev_cap(dev, CAP_TWOEOF) && weof_dev(dev, 1) != 0) { /* write eof */
420 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
422 dev->state |= (ST_EOF | ST_EOT | ST_WEOT);
426 /* Limit maximum File size on volume to user specified value */
427 if (dev_state(dev, ST_TAPE)) {
428 if ((dev->max_file_size > 0) &&
429 (dev->file_addr+block->binbuf) >= dev->max_file_size) {
432 if (weof_dev(dev, 1) != 0) { /* write eof */
433 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
434 block->write_failed = true;
435 dev->state |= (ST_EOF | ST_EOT | ST_WEOT);
436 Dmsg0(100, "dir_update_volume_info\n");
437 dir_update_volume_info(jcr, dev, 0);
441 /* Do bookkeeping to handle EOF just written */
442 Dmsg0(100, "dir_update_volume_info\n");
443 dir_update_volume_info(jcr, dev, 0);
444 if (!dir_create_jobmedia_record(jcr)) {
445 Jmsg(jcr, M_ERROR, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
446 jcr->VolCatInfo.VolCatName, jcr->Job);
450 * Walk through all attached jcrs indicating the file has changed
452 Dmsg1(100, "Walk attached jcrs. Volume=%s\n", dev->VolCatInfo.VolCatName);
453 for (JCR *mjcr=NULL; (mjcr=next_attached_jcr(dev, mjcr)); ) {
454 if (mjcr->JobId == 0) {
455 continue; /* ignore console */
457 mjcr->NewFile = true; /* set reminder to do set_new_file_params */
459 set_new_file_parameters(jcr, dev);
463 dev->VolCatInfo.VolCatWrites++;
464 Dmsg1(300, "Write block of %u bytes\n", wlen);
465 stat = write(dev->fd, block->buf, (size_t)wlen);
466 if (stat != (ssize_t)wlen) {
467 /* We should check for errno == ENOSPC, BUT many
468 * devices simply report EIO when the volume is full.
469 * With a little more thought we may be able to check
470 * capacity and distinguish real errors and EOT
471 * conditions. In any case, we probably want to
472 * simulate an End of Medium.
475 /* I have added the ifdefing here because it appears on
476 * FreeBSD where MTIOCERRSTAT is defined, this not only
477 * clears the error but clears the residual unwritten
478 * buffers -> data loss. As a consequence, on those
479 * systems (FreeBSD like), do the clrerror() only after
480 * the weof_dev() call.
482 clrerror_dev(dev, -1);
483 if (dev->dev_errno == 0) {
484 dev->dev_errno = ENOSPC; /* out of space */
486 Jmsg(jcr, M_ERROR, 0, _("Write error at %u:%u on device %s. ERR=%s.\n"),
487 dev->file, dev->block_num, dev->dev_name, strerror(dev->dev_errno));
489 dev->dev_errno = ENOSPC; /* out of space */
490 Jmsg(jcr, M_INFO, 0, _("End of medium at %u:%u on device %s. Write of %u bytes got %d.\n"),
491 dev->file, dev->block_num, dev->dev_name, wlen, stat);
494 Dmsg6(100, "=== Write error. size=%u rtn=%d dev_blk=%d blk_blk=%d errno=%d: ERR=%s\n",
495 wlen, stat, dev->block_num, block->BlockNumber, dev->dev_errno, strerror(dev->dev_errno));
497 block->write_failed = true;
498 if (weof_dev(dev, 1) != 0) { /* end the tape */
499 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
501 Dmsg0(100, "dir_update_volume_info\n");
502 dir_update_volume_info(jcr, dev, 0);
503 if (dev_cap(dev, CAP_TWOEOF) && weof_dev(dev, 1) != 0) { /* end the tape */
504 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
506 dev->state |= (ST_EOF | ST_EOT | ST_WEOT);
509 #define CHECK_LAST_BLOCK
510 #ifdef CHECK_LAST_BLOCK
512 * If the device is a tape and it supports backspace record,
513 * we backspace over one or two eof marks depending on
514 * how many we just wrote, then over the last record,
515 * then re-read it and verify that the block number is
518 if (dev->state & ST_TAPE && dev_cap(dev, CAP_BSR)) {
520 /* Now back up over what we wrote and read the last block */
521 if (!bsf_dev(dev, 1)) {
523 Jmsg(jcr, M_ERROR, 0, _("Backspace file at EOT failed. ERR=%s\n"), strerror(dev->dev_errno));
525 if (ok && dev_cap(dev, CAP_TWOEOF) && !bsf_dev(dev, 1)) {
527 Jmsg(jcr, M_ERROR, 0, _("Backspace file at EOT failed. ERR=%s\n"), strerror(dev->dev_errno));
529 /* Backspace over record */
530 if (ok && !bsr_dev(dev, 1)) {
532 Jmsg(jcr, M_ERROR, 0, _("Backspace record at EOT failed. ERR=%s\n"), strerror(dev->dev_errno));
534 * On FreeBSD systems, if the user got here, it is likely that his/her
535 * tape drive is "frozen". The correct thing to do is a
536 * rewind(), but if we do that, higher levels in cleaning up, will
537 * most likely write the EOS record over the beginning of the
538 * tape. The rewind *is* done later in mount.c when another
539 * tape is requested. Note, the clrerror_dev() call in bsr_dev()
540 * calls ioctl(MTCERRSTAT), which *should* fix the problem.
544 DEV_BLOCK *lblock = new_block(dev);
545 /* Note, this can destroy dev->errmsg */
546 if (!read_block_from_dev(jcr, dev, lblock, NO_BLOCK_NUMBER_CHECK)) {
547 Jmsg(jcr, M_ERROR, 0, _("Re-read last block at EOT failed. ERR=%s"), dev->errmsg);
549 if (lblock->BlockNumber+1 == block->BlockNumber) {
550 Jmsg(jcr, M_INFO, 0, _("Re-read of last block succeeded.\n"));
552 Jmsg(jcr, M_ERROR, 0, _(
553 "Re-read of last block failed. Last block=%u Current block=%u.\n"),
554 lblock->BlockNumber, block->BlockNumber);
564 /* We successfully wrote the block, now do housekeeping */
566 dev->VolCatInfo.VolCatBytes += block->binbuf;
567 dev->VolCatInfo.VolCatBlocks++;
568 dev->file_addr += wlen;
569 dev->EndBlock = dev->block_num;
570 dev->EndFile = dev->file;
572 block->BlockNumber++;
574 /* Update jcr values */
575 if (dev_state(dev, ST_TAPE)) {
576 jcr->EndBlock = dev->EndBlock;
577 jcr->EndFile = dev->EndFile;
579 jcr->EndBlock = (uint32_t)dev->file_addr;
580 jcr->EndFile = (uint32_t)(dev->file_addr >> 32);
582 if (jcr->VolFirstIndex == 0 && block->FirstIndex > 0) {
583 jcr->VolFirstIndex = block->FirstIndex;
585 if (block->LastIndex > 0) {
586 jcr->VolLastIndex = block->LastIndex;
588 jcr->WroteVol = true;
590 Dmsg2(190, "write_block: wrote block %d bytes=%d\n", dev->block_num,
597 * Read block with locking
600 int read_block_from_device(JCR *jcr, DEVICE *dev, DEV_BLOCK *block, bool check_block_numbers)
603 Dmsg0(90, "Enter read_block_from_device\n");
605 stat = read_block_from_dev(jcr, dev, block, check_block_numbers);
607 Dmsg0(90, "Leave read_block_from_device\n");
612 * Read the next block into the block structure and unserialize
613 * the block header. For a file, the block may be partially
614 * or completely in the current buffer.
616 int read_block_from_dev(JCR *jcr, DEVICE *dev, DEV_BLOCK *block, bool check_block_numbers)
620 uint32_t BlockNumber;
623 if (dev_state(dev, ST_EOT)) {
627 Dmsg1(100, "Full read() in read_block_from_device() len=%d\n",
631 Mmsg1(&dev->errmsg, _("Block buffer size looping problem on device %s\n"),
633 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
639 stat = read(dev->fd, block->buf, (size_t)block->buf_len);
641 dev->VolCatInfo.VolCatErrors++;
643 } while (stat == -1 && (errno == EINTR || errno == EIO) && retry++ < 11);
644 // Dmsg1(100, "read stat = %d\n", stat);
646 Dmsg1(90, "Read device got: ERR=%s\n", strerror(errno));
647 clrerror_dev(dev, -1);
649 Mmsg2(&dev->errmsg, _("Read error on device %s. ERR=%s.\n"),
650 dev->dev_name, strerror(dev->dev_errno));
651 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
652 if (dev->state & ST_EOF) { /* EOF just seen? */
653 dev->state |= ST_EOT; /* yes, error => EOT */
657 Dmsg1(90, "Read device got %d bytes\n", stat);
658 if (stat == 0) { /* Got EOF ! */
659 dev->block_num = block->read_len = 0;
660 Mmsg1(&dev->errmsg, _("Read zero bytes on device %s.\n"), dev->dev_name);
661 if (dev->state & ST_EOF) { /* EOF already read? */
662 dev->state |= ST_EOT; /* yes, 2 EOFs => EOT */
666 dev->file++; /* increment file */
667 dev->state |= ST_EOF; /* set EOF read */
669 return 0; /* return eof */
671 /* Continue here for successful read */
672 block->read_len = stat; /* save length read */
673 if (block->read_len < BLKHDR2_LENGTH) {
674 Mmsg2(&dev->errmsg, _("Very short block of %d bytes on device %s discarded.\n"),
675 block->read_len, dev->dev_name);
676 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
677 dev->state |= ST_SHORT; /* set short block */
678 block->read_len = block->binbuf = 0;
679 return 0; /* return error */
682 BlockNumber = block->BlockNumber + 1;
683 if (!unser_block_header(jcr, dev, block)) {
689 * If the block is bigger than the buffer, we reposition for
690 * re-reading the block, allocate a buffer of the correct size,
693 if (block->block_len > block->buf_len) {
694 Mmsg2(&dev->errmsg, _("Block length %u is greater than buffer %u. Attempting recovery.\n"),
695 block->block_len, block->buf_len);
696 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
697 Pmsg1(000, "%s", dev->errmsg);
698 /* Attempt to reposition to re-read the block */
699 if (dev->state & ST_TAPE) {
700 Dmsg0(100, "Backspace record for reread.\n");
701 if (!bsr_dev(dev, 1)) {
702 Jmsg(jcr, M_ERROR, 0, "%s", strerror_dev(dev));
707 Dmsg0(100, "Seek to beginning of block for reread.\n");
708 off_t pos = lseek(dev->fd, (off_t)0, SEEK_CUR); /* get curr pos */
709 pos -= block->read_len;
710 lseek(dev->fd, pos, SEEK_SET);
712 Mmsg1(&dev->errmsg, _("Setting block buffer size to %u bytes.\n"), block->block_len);
713 Jmsg(jcr, M_INFO, 0, "%s", dev->errmsg);
714 Pmsg1(000, "%s", dev->errmsg);
715 /* Set new block length */
716 dev->max_block_size = block->block_len;
717 block->buf_len = block->block_len;
718 free_memory(block->buf);
719 block->buf = get_memory(block->buf_len);
722 goto reread; /* re-read block with correct block size */
725 if (block->block_len > block->read_len) {
726 Mmsg3(&dev->errmsg, _("Short block at %u of %d bytes on device %s discarded.\n"),
727 dev->block_num, block->read_len, dev->dev_name);
728 Jmsg(jcr, M_ERROR, 0, "%s", dev->errmsg);
729 dev->state |= ST_SHORT; /* set short block */
730 block->read_len = block->binbuf = 0;
731 return 0; /* return error */
734 dev->state &= ~(ST_EOF|ST_SHORT); /* clear EOF and short block */
735 dev->VolCatInfo.VolCatReads++;
736 dev->VolCatInfo.VolCatRBytes += block->read_len;
738 dev->VolCatInfo.VolCatBytes += block->block_len;
739 dev->VolCatInfo.VolCatBlocks++;
740 dev->file_addr += block->block_len;
741 dev->EndBlock = dev->block_num;
742 dev->EndFile = dev->file;
745 /* Update jcr values */
746 if (dev->state & ST_TAPE) {
747 jcr->EndBlock = dev->EndBlock;
748 jcr->EndFile = dev->EndFile;
750 jcr->EndBlock = (uint32_t)dev->file_addr;
751 jcr->EndFile = (uint32_t)(dev->file_addr >> 32);
755 * If we read a short block on disk,
756 * seek to beginning of next block. This saves us
757 * from shuffling blocks around in the buffer. Take a
758 * look at this from an efficiency stand point later, but
759 * it should only happen once at the end of each job.
761 * I've been lseek()ing negative relative to SEEK_CUR for 30
762 * years now. However, it seems that with the new off_t definition,
763 * it is not possible to seek negative amounts, so we use two
764 * lseek(). One to get the position, then the second to do an
765 * absolute positioning -- so much for efficiency. KES Sep 02.
767 Dmsg0(200, "At end of read block\n");
768 if (block->read_len > block->block_len && !(dev->state & ST_TAPE)) {
769 off_t pos = lseek(dev->fd, (off_t)0, SEEK_CUR); /* get curr pos */
770 pos -= (block->read_len - block->block_len);
771 lseek(dev->fd, pos, SEEK_SET);
772 Dmsg2(100, "Did lseek blk_size=%d rdlen=%d\n", block->block_len,
775 Dmsg2(200, "Exit read_block read_len=%d block_len=%d\n",
776 block->read_len, block->block_len);
777 block->block_read = true;