3 * dev.c -- low level operations on device (storage device)
7 * NOTE!!!! None of these routines are reentrant. You must
8 * use lock_device() and unlock_device() at a higher level,
9 * or use the xxx_device() equivalents. By moving the
10 * thread synchronization to a higher level, we permit
11 * the higher level routines to "seize" the device and
12 * to carry out operations without worrying about who
13 * set what lock (i.e. race conditions).
15 * Note, this is the device dependent code, and my have
16 * to be modified for each system, but is meant to
17 * be as "generic" as possible.
19 * The purpose of this code is to develop a SIMPLE Storage
20 * daemon. More complicated coding (double buffering, writer
21 * thread, ...) is left for a later version.
23 * Unfortunately, I have had to add more and more complication
24 * to this code. This was not foreseen as noted above, and as
25 * a consequence has lead to something more contorted than is
26 * really necessary -- KES. Note, this contortion has been
27 * corrected to a large extent by a rewrite (Apr MMI).
32 Copyright (C) 2000-2003 Kern Sibbald and John Walker
34 This program is free software; you can redistribute it and/or
35 modify it under the terms of the GNU General Public License as
36 published by the Free Software Foundation; either version 2 of
37 the License, or (at your option) any later version.
39 This program is distributed in the hope that it will be useful,
40 but WITHOUT ANY WARRANTY; without even the implied warranty of
41 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
42 General Public License for more details.
44 You should have received a copy of the GNU General Public
45 License along with this program; if not, write to the Free
46 Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
52 * Handling I/O errors and end of tape conditions are a bit tricky.
53 * This is how it is currently done when writting.
54 * On either an I/O error or end of tape,
55 * we will stop writing on the physical device (no I/O recovery is
56 * attempted at least in this daemon). The state flag will be sent
57 * to include ST_EOT, which is ephimeral, and ST_WEOT, which is
58 * persistent. Lots of routines clear ST_EOT, but ST_WEOT is
59 * cleared only when the problem goes away. Now when ST_WEOT
60 * is set all calls to write_dev() are handled as usual. However,
61 * in write_block() instead of attempting to write the block to
62 * the physical device, it is chained into a list of blocks written
63 * after the EOT condition. In addition, all threads are blocked
64 * from writing on the tape by calling lock(), and thread other
65 * than the first thread to hit the EOT will block on a condition
66 * variable. The first thread to hit the EOT will continue to
67 * be able to read and write the tape (he sort of tunnels through
68 * the locking mechanism -- see lock() for details).
70 * Now presumably somewhere higher in the chain of command
71 * (device.c), someone will notice the EOT condition and
72 * get a new tape up, get the tape label read, and mark
73 * the label for rewriting. Then this higher level routine
74 * will write the unwritten buffer to the new volume.
75 * Finally, he will release
76 * any blocked threads by doing a broadcast on the condition
77 * variable. At that point, we should be totally back in
78 * business with no lost data.
85 /* Forward referenced functions */
88 * Allocate and initialize the DEVICE structure
89 * Note, if dev is non-NULL, it is already allocated,
90 * thus we neither allocate it nor free it. This allows
91 * the caller to put the packet in shared memory.
93 * Note, for a tape, the device->device_name is the device name
94 * (e.g. /dev/nst0), and for a file, the device name
95 * is the directory in which the file will be placed.
99 init_dev(DEVICE *dev, DEVRES *device)
105 /* Check that device is available */
106 if (stat(device->device_name, &statp) < 0) {
108 dev->dev_errno = errno;
110 Emsg2(M_FATAL, 0, "Unable to stat device %s : %s\n", device->device_name,
116 if (S_ISDIR(statp.st_mode)) {
118 } else if (S_ISCHR(statp.st_mode)) {
120 } else if (S_ISFIFO(statp.st_mode)) {
124 dev->dev_errno = ENODEV;
126 Emsg2(M_FATAL, 0, _("%s is an unknown device type. Must be tape or directory. st_mode=%x\n"),
127 dev_name, statp.st_mode);
131 dev = (DEVICE *)get_memory(sizeof(DEVICE));
132 memset(dev, 0, sizeof(DEVICE));
133 dev->state = ST_MALLOC;
135 memset(dev, 0, sizeof(DEVICE));
138 /* Copy user supplied device parameters from Resource */
139 dev->dev_name = get_memory(strlen(device->device_name)+1);
140 strcpy(dev->dev_name, device->device_name);
141 dev->capabilities = device->cap_bits;
142 dev->min_block_size = device->min_block_size;
143 dev->max_block_size = device->max_block_size;
144 dev->max_volume_size = device->max_volume_size;
145 dev->max_file_size = device->max_file_size;
146 dev->volume_capacity = device->volume_capacity;
147 dev->max_rewind_wait = device->max_rewind_wait;
148 dev->max_open_wait = device->max_open_wait;
149 dev->max_open_vols = device->max_open_vols;
150 dev->device = device;
153 dev->state |= ST_TAPE;
155 dev->state |= ST_FIFO;
156 dev->capabilities |= CAP_STREAM; /* set stream device */
158 dev->state |= ST_FILE;
161 if (dev->max_block_size > 1000000) {
162 Emsg3(M_ERROR, 0, _("Block size %u on device %s is too large, using default %u\n"),
163 dev->max_block_size, dev->dev_name, DEFAULT_BLOCK_SIZE);
164 dev->max_block_size = 0;
166 if (dev->max_block_size % TAPE_BSIZE != 0) {
167 Emsg2(M_WARNING, 0, _("Max block size %u not multiple of device %s block size.\n"),
168 dev->max_block_size, dev->dev_name);
171 dev->errmsg = get_pool_memory(PM_EMSG);
174 if ((errstat = pthread_mutex_init(&dev->mutex, NULL)) != 0) {
175 dev->dev_errno = errstat;
176 Mmsg1(&dev->errmsg, _("Unable to init mutex: ERR=%s\n"), strerror(errstat));
177 Emsg0(M_FATAL, 0, dev->errmsg);
179 if ((errstat = pthread_cond_init(&dev->wait, NULL)) != 0) {
180 dev->dev_errno = errstat;
181 Mmsg1(&dev->errmsg, _("Unable to init cond variable: ERR=%s\n"), strerror(errstat));
182 Emsg0(M_FATAL, 0, dev->errmsg);
184 if ((errstat = pthread_cond_init(&dev->wait_next_vol, NULL)) != 0) {
185 dev->dev_errno = errstat;
186 Mmsg1(&dev->errmsg, _("Unable to init cond variable: ERR=%s\n"), strerror(errstat));
187 Emsg0(M_FATAL, 0, dev->errmsg);
190 Dmsg2(29, "init_dev: tape=%d dev_name=%s\n", dev_is_tape(dev), dev->dev_name);
194 /* Open the device with the operating system and
195 * initialize buffer pointers.
197 * Note, for a tape, the VolName is the name we give to the
198 * volume (not really used here), but for a file, the
199 * VolName represents the name of the file to be created/opened.
200 * In the case of a file, the full name is the device name
201 * (archive_name) with the VolName concatenated.
204 open_dev(DEVICE *dev, char *VolName, int mode)
206 POOLMEM *archive_name;
208 if (dev->state & ST_OPENED) {
210 * *****FIXME***** how to handle two threads wanting
211 * different volumes mounted???? E.g. one is waiting
212 * for the next volume to be mounted, and a new job
213 * starts and snatches up the device.
215 if (VolName && strcmp(dev->VolCatInfo.VolCatName, VolName) != 0) {
219 Mmsg2(&dev->errmsg, _("WARNING!!!! device %s opened %d times!!!\n"),
220 dev->dev_name, dev->use_count);
221 Emsg1(M_WARNING, 0, "%s", dev->errmsg);
225 bstrncpy(dev->VolCatInfo.VolCatName, VolName, sizeof(dev->VolCatInfo.VolCatName));
228 Dmsg3(29, "open_dev: tape=%d dev_name=%s vol=%s\n", dev_is_tape(dev),
229 dev->dev_name, dev->VolCatInfo.VolCatName);
230 dev->state &= ~(ST_LABEL|ST_APPEND|ST_READ|ST_EOT|ST_WEOT|ST_EOF);
231 if (dev->state & (ST_TAPE|ST_FIFO)) {
233 Dmsg0(29, "open_dev: device is tape\n");
234 if (mode == OPEN_READ_WRITE) {
235 dev->mode = O_RDWR | O_BINARY;
236 } else if (mode == OPEN_READ_ONLY) {
237 dev->mode = O_RDONLY | O_BINARY;
238 } else if (mode == OPEN_WRITE_ONLY) {
239 dev->mode = O_WRONLY | O_BINARY;
241 Emsg0(M_ABORT, 0, _("Illegal mode given to open_dev.\n"));
243 timeout = dev->max_open_wait;
245 if (dev->state & ST_FIFO && timeout) {
247 dev->tid = start_thread_timer(pthread_self(), timeout);
249 /* If busy retry each second for max_open_wait seconds */
250 while ((dev->fd = open(dev->dev_name, dev->mode, MODE_RW)) < 0) {
251 if (errno == EAGAIN) {
254 if (errno == EBUSY && timeout-- > 0) {
255 Dmsg2(100, "Device %s busy. ERR=%s\n", dev->dev_name, strerror(errno));
259 dev->dev_errno = errno;
260 Mmsg2(&dev->errmsg, _("stored: unable to open device %s: ERR=%s\n"),
261 dev->dev_name, strerror(dev->dev_errno));
262 /* Stop any open timer we set */
264 stop_thread_timer(dev->tid);
267 Emsg0(M_FATAL, 0, dev->errmsg);
272 dev->state |= ST_OPENED;
274 update_pos_dev(dev); /* update position */
276 /* Stop any open() timer we started */
278 stop_thread_timer(dev->tid);
281 Dmsg1(29, "open_dev: tape %d opened\n", dev->fd);
284 * Handle opening of File Archive (not a tape)
286 if (VolName == NULL || *VolName == 0) {
287 Mmsg(&dev->errmsg, _("Could not open file device %s. No Volume name given.\n"),
291 archive_name = get_pool_memory(PM_FNAME);
292 pm_strcpy(&archive_name, dev->dev_name);
293 if (archive_name[strlen(archive_name)] != '/') {
294 pm_strcat(&archive_name, "/");
296 pm_strcat(&archive_name, VolName);
297 Dmsg1(29, "open_dev: device is disk %s\n", archive_name);
298 if (mode == OPEN_READ_WRITE) {
299 dev->mode = O_CREAT | O_RDWR | O_BINARY;
300 } else if (mode == OPEN_READ_ONLY) {
301 dev->mode = O_RDONLY | O_BINARY;
302 } else if (mode == OPEN_WRITE_ONLY) {
303 dev->mode = O_WRONLY | O_BINARY;
305 Emsg0(M_ABORT, 0, _("Illegal mode given to open_dev.\n"));
307 /* If creating file, give 0640 permissions */
308 if ((dev->fd = open(archive_name, dev->mode, 0640)) < 0) {
309 dev->dev_errno = errno;
310 Mmsg2(&dev->errmsg, _("Could not open: %s, ERR=%s\n"), archive_name, strerror(dev->dev_errno));
311 Emsg0(M_FATAL, 0, dev->errmsg);
314 dev->state |= ST_OPENED;
316 update_pos_dev(dev); /* update position */
318 Dmsg1(29, "open_dev: disk fd=%d opened\n", dev->fd);
319 free_pool_memory(archive_name);
326 int _rewind_dev(char *file, int line, DEVICE *dev)
328 Dmsg2(000, "rewind_dev called from %s:%d\n", file, line);
329 return rewind_dev(dev);
336 * Returns: 1 on success
339 int rewind_dev(DEVICE *dev)
344 Dmsg1(29, "rewind_dev %s\n", dev->dev_name);
346 dev->dev_errno = EBADF;
347 Mmsg1(&dev->errmsg, _("Bad call to rewind_dev. Device %s not open\n"),
349 Emsg0(M_FATAL, 0, dev->errmsg);
352 dev->state &= ~(ST_APPEND|ST_READ|ST_EOT|ST_EOF|ST_WEOT); /* remove EOF/EOT flags */
353 dev->block_num = dev->file = 0;
355 if (dev->state & ST_TAPE) {
356 mt_com.mt_op = MTREW;
358 /* If we get an I/O error on rewind, it is probably because
359 * the drive is actually busy. We loop for (about 5 minutes)
360 * retrying every 5 seconds.
362 for (i=dev->max_rewind_wait; ; i -= 5) {
363 if (ioctl(dev->fd, MTIOCTOP, (char *)&mt_com) < 0) {
364 if (i == dev->max_rewind_wait) {
365 Dmsg1(200, "Rewind error, %s. retrying ...\n", strerror(errno));
367 clrerror_dev(dev, MTREW);
368 if (dev->dev_errno == EIO && i > 0) {
369 Dmsg0(200, "Sleeping 5 seconds.\n");
373 Mmsg2(&dev->errmsg, _("Rewind error on %s. ERR=%s.\n"),
374 dev->dev_name, strerror(dev->dev_errno));
379 } else if (dev->state & ST_FILE) {
380 if (lseek(dev->fd, (off_t)0, SEEK_SET) < 0) {
381 dev->dev_errno = errno;
382 Mmsg2(&dev->errmsg, _("lseek error on %s. ERR=%s.\n"),
383 dev->dev_name, strerror(dev->dev_errno));
391 * Position device to end of medium (end of data)
392 * Returns: 1 on succes
399 struct mtget mt_stat;
403 Dmsg0(29, "eod_dev\n");
404 if (dev->state & ST_EOT) {
407 dev->state &= ~(ST_EOF); /* remove EOF flags */
408 dev->block_num = dev->file = 0;
410 if (dev->state & (ST_FIFO | ST_PROG)) {
413 if (!(dev->state & ST_TAPE)) {
414 pos = lseek(dev->fd, (off_t)0, SEEK_END);
415 // Dmsg1(000, "====== Seek to %lld\n", pos);
418 dev->state |= ST_EOT;
424 if (dev_cap(dev, CAP_EOM)) {
425 mt_com.mt_op = MTEOM;
427 if ((stat=ioctl(dev->fd, MTIOCTOP, (char *)&mt_com)) < 0) {
428 Dmsg1(50, "ioctl error: %s\n", strerror(dev->dev_errno));
429 clrerror_dev(dev, mt_com.mt_op);
431 Mmsg2(&dev->errmsg, _("ioctl MTEOM error on %s. ERR=%s.\n"),
432 dev->dev_name, strerror(dev->dev_errno));
435 if (ioctl(dev->fd, MTIOCGET, (char *)&mt_stat) < 0) {
436 dev->dev_errno = errno;
437 Mmsg2(&dev->errmsg, _("ioctl MTIOCGET error on %s. ERR=%s.\n"),
438 dev->dev_name, strerror(dev->dev_errno));
441 Dmsg2(200, "EOD file=%d block=%d\n", mt_stat.mt_fileno, mt_stat.mt_blkno);
442 dev->file = mt_stat.mt_fileno;
445 * Rewind then use FSF until EOT reached
451 if (!rewind_dev(dev)) {
454 while (!(dev->state & ST_EOT)) {
455 Dmsg0(200, "Do fsf 1\n");
456 if (!fsf_dev(dev, 1)) {
457 Dmsg0(200, "fsf_dev error.\n");
463 * Some drivers leave us after second EOF when doing
464 * MTEOM, so we must backup so that appending overwrites
467 if (dev_cap(dev, CAP_BSFATEOM)) {
468 stat = (bsf_dev(dev, 1) == 0);
469 dev->file++; /* keep same file */
471 update_pos_dev(dev); /* update position */
474 Dmsg1(200, "EOD dev->file=%d\n", dev->file);
479 * Set the position of the device -- only for files
480 * For other devices, there is no generic way to do it.
481 * Returns: 1 on succes
484 int update_pos_dev(DEVICE *dev)
490 dev->dev_errno = EBADF;
491 Mmsg0(&dev->errmsg, _("Bad device call. Archive not open\n"));
492 Emsg0(M_FATAL, 0, dev->errmsg);
496 /* Find out where we are */
497 if (dev->state & ST_FILE) {
500 pos = lseek(dev->fd, (off_t)0, SEEK_CUR);
502 Pmsg1(000, "Seek error: ERR=%s\n", strerror(dev->dev_errno));
503 dev->dev_errno = errno;
504 Mmsg2(&dev->errmsg, _("lseek error on %s. ERR=%s.\n"),
505 dev->dev_name, strerror(dev->dev_errno));
508 dev->file_addr = pos;
517 * Return the status of the device. This was meant
518 * to be a generic routine. Unfortunately, it doesn't
519 * seem possible (at least I do not know how to do it
520 * currently), which means that for the moment, this
521 * routine has very little value.
523 * Returns: 1 on success
527 status_dev(DEVICE *dev, uint32_t *status)
529 struct mtget mt_stat;
532 if (dev->state & (ST_EOT | ST_WEOT)) {
536 if (dev->state & ST_EOF) {
540 if (dev->state & ST_TAPE) {
542 Dmsg0(-20," Driver status:");
543 Dmsg2(-20," file=%d block=%d\n", dev->file, dev->block_num);
544 if (ioctl(dev->fd, MTIOCGET, (char *)&mt_stat) < 0) {
545 dev->dev_errno = errno;
546 Mmsg2(&dev->errmsg, _("ioctl MTIOCGET error on %s. ERR=%s.\n"),
547 dev->dev_name, strerror(dev->dev_errno));
550 Dmsg0(-20, " Device status:");
552 #if defined(HAVE_LINUX_OS)
553 if (GMT_EOF(mt_stat.mt_gstat)) {
557 if (GMT_BOT(mt_stat.mt_gstat)) {
561 if (GMT_EOT(mt_stat.mt_gstat)) {
565 if (GMT_SM(mt_stat.mt_gstat)) {
569 if (GMT_EOD(mt_stat.mt_gstat)) {
573 if (GMT_WR_PROT(mt_stat.mt_gstat)) {
575 Dmsg0(-20, " WR_PROT");
577 if (GMT_ONLINE(mt_stat.mt_gstat)) {
579 Dmsg0(-20, " ONLINE");
581 if (GMT_DR_OPEN(mt_stat.mt_gstat)) {
583 Dmsg0(-20, " DR_OPEN");
585 if (GMT_IM_REP_EN(mt_stat.mt_gstat)) {
586 stat |= BMT_IM_REP_EN;
587 Dmsg0(-20, " IM_REP_EN");
589 #endif /* !SunOS && !OSF */
590 Dmsg2(-20, " file=%d block=%d\n", mt_stat.mt_fileno, mt_stat.mt_blkno);
592 stat |= BMT_ONLINE | BMT_BOT;
600 * Load medium in device
601 * Returns: 1 on success
604 int load_dev(DEVICE *dev)
611 dev->dev_errno = EBADF;
612 Mmsg0(&dev->errmsg, _("Bad call to load_dev. Archive not open\n"));
613 Emsg0(M_FATAL, 0, dev->errmsg);
616 if (!(dev->state & ST_TAPE)) {
620 Dmsg0(200, "stored: MTLOAD command not available\n");
621 dev->dev_errno = ENOTTY; /* function not available */
622 Mmsg2(&dev->errmsg, _("ioctl MTLOAD error on %s. ERR=%s.\n"),
623 dev->dev_name, strerror(dev->dev_errno)); return 0;
627 dev->block_num = dev->file = 0;
629 mt_com.mt_op = MTLOAD;
631 if (ioctl(dev->fd, MTIOCTOP, (char *)&mt_com) < 0) {
632 dev->dev_errno = errno;
633 Mmsg2(&dev->errmsg, _("ioctl MTLOAD error on %s. ERR=%s.\n"),
634 dev->dev_name, strerror(dev->dev_errno)); return 0;
641 * Rewind device and put it offline
642 * Returns: 1 on success
645 int offline_dev(DEVICE *dev)
650 dev->dev_errno = EBADF;
651 Mmsg0(&dev->errmsg, _("Bad call to offline_dev. Archive not open\n"));
652 Emsg0(M_FATAL, 0, dev->errmsg);
655 if (!(dev->state & ST_TAPE)) {
659 dev->state &= ~(ST_APPEND|ST_READ|ST_EOT|ST_EOF|ST_WEOT); /* remove EOF/EOT flags */
660 dev->block_num = dev->file = 0;
663 mt_com.mt_op = MTUNLOCK;
665 ioctl(dev->fd, MTIOCTOP, (char *)&mt_com);
667 mt_com.mt_op = MTOFFL;
669 if (ioctl(dev->fd, MTIOCTOP, (char *)&mt_com) < 0) {
670 dev->dev_errno = errno;
671 Mmsg2(&dev->errmsg, _("ioctl MTOFFL error on %s. ERR=%s.\n"),
672 dev->dev_name, strerror(dev->dev_errno));
675 Dmsg1(100, "Offlined device %s\n", dev->dev_name);
679 int offline_or_rewind_dev(DEVICE *dev)
681 if (dev_cap(dev, CAP_OFFLINEUNMOUNT)) {
682 return offline_dev(dev);
685 * Note, this rewind probably should not be here (it wasn't
686 * in prior versions of Bacula), but on FreeBSD, this is
687 * needed in the case the tape was "frozen" due to an error
688 * such as backspacing after writing and EOF. If it is not
689 * done, all future references to the drive get and I/O error.
691 return rewind_dev(dev);
696 * Foward space a file
697 * Returns: 1 on success
701 fsf_dev(DEVICE *dev, int num)
707 dev->dev_errno = EBADF;
708 Mmsg0(&dev->errmsg, _("Bad call to fsf_dev. Archive not open\n"));
709 Emsg0(M_FATAL, 0, dev->errmsg);
713 if (!(dev->state & ST_TAPE)) {
716 if (dev->state & ST_EOT) {
718 Mmsg1(&dev->errmsg, _("Device %s at End of Tape.\n"), dev->dev_name);
721 if (dev->state & ST_EOF) {
722 Dmsg0(200, "ST_EOF set on entry to FSF\n");
724 if (dev->state & ST_EOT) {
725 Dmsg0(200, "ST_EOT set on entry to FSF\n");
728 Dmsg0(29, "fsf_dev\n");
730 if (dev_cap(dev, CAP_FSF)) {
733 Dmsg0(200, "FSF has cap_fsf\n");
734 if (dev->max_block_size == 0) {
735 rbuf_len = DEFAULT_BLOCK_SIZE;
737 rbuf_len = dev->max_block_size;
739 rbuf = get_memory(rbuf_len);
740 mt_com.mt_op = MTFSF;
742 while (num-- && !(dev->state & ST_EOT)) {
743 Dmsg0(200, "Doing read before fsf\n");
744 if ((stat = read(dev->fd, (char *)rbuf, rbuf_len)) < 0) {
745 if (errno == ENOMEM) { /* tape record exceeds buf len */
746 stat = rbuf_len; /* This is OK */
748 dev->state |= ST_EOT;
749 clrerror_dev(dev, -1);
750 Dmsg2(200, "Set ST_EOT read errno=%d. ERR=%s\n", dev->dev_errno,
751 strerror(dev->dev_errno));
752 Mmsg2(&dev->errmsg, _("read error on %s. ERR=%s.\n"),
753 dev->dev_name, strerror(dev->dev_errno));
754 Dmsg1(200, "%s", dev->errmsg);
758 if (stat == 0) { /* EOF */
760 Dmsg1(200, "End of File mark from read. File=%d\n", dev->file+1);
761 /* Two reads of zero means end of tape */
762 if (dev->state & ST_EOF) {
763 dev->state |= ST_EOT;
764 Dmsg0(200, "Set ST_EOT\n");
767 dev->state |= ST_EOF;
772 } else { /* Got data */
773 dev->state &= ~(ST_EOF|ST_EOT);
776 Dmsg0(200, "Doing MTFSF\n");
777 stat = ioctl(dev->fd, MTIOCTOP, (char *)&mt_com);
778 if (stat < 0) { /* error => EOT */
779 dev->state |= ST_EOT;
780 Dmsg0(200, "Set ST_EOT\n");
781 clrerror_dev(dev, MTFSF);
782 Mmsg2(&dev->errmsg, _("ioctl MTFSF error on %s. ERR=%s.\n"),
783 dev->dev_name, strerror(dev->dev_errno));
784 Dmsg0(200, "Got < 0 for MTFSF\n");
785 Dmsg1(200, "%s", dev->errmsg);
787 dev->state |= ST_EOF; /* just read EOF */
795 * No FSF, so use FSR to simulate it
798 Dmsg0(200, "Doing FSR for FSF\n");
799 while (num-- && !(dev->state & ST_EOT)) {
800 fsr_dev(dev, INT32_MAX); /* returns -1 on EOF or EOT */
802 if (dev->state & ST_EOT) {
804 Mmsg1(&dev->errmsg, _("Device %s at End of Tape.\n"), dev->dev_name);
811 Dmsg1(200, "Return %d from FSF\n", stat);
812 if (dev->state & ST_EOF)
813 Dmsg0(200, "ST_EOF set on exit FSF\n");
814 if (dev->state & ST_EOT)
815 Dmsg0(200, "ST_EOT set on exit FSF\n");
816 Dmsg1(200, "Return from FSF file=%d\n", dev->file);
817 return stat == 0 ? 1 : 0;
821 * Backward space a file
822 * Returns: 0 on failure
826 bsf_dev(DEVICE *dev, int num)
832 dev->dev_errno = EBADF;
833 Mmsg0(&dev->errmsg, _("Bad call to bsf_dev. Archive not open\n"));
834 Emsg0(M_FATAL, 0, dev->errmsg);
838 if (!(dev_state(dev, ST_TAPE))) {
841 Dmsg0(29, "bsf_dev\n");
842 dev->state &= ~(ST_EOT|ST_EOF);
845 mt_com.mt_op = MTBSF;
846 mt_com.mt_count = num;
847 stat = ioctl(dev->fd, MTIOCTOP, (char *)&mt_com);
849 clrerror_dev(dev, MTBSF);
850 Mmsg2(&dev->errmsg, _("ioctl MTBSF error on %s. ERR=%s.\n"),
851 dev->dev_name, strerror(dev->dev_errno));
854 return stat == 0 ? 1 : 0;
859 * Foward space a record
860 * Returns: 0 on failure
864 fsr_dev(DEVICE *dev, int num)
870 dev->dev_errno = EBADF;
871 Mmsg0(&dev->errmsg, _("Bad call to fsr_dev. Archive not open\n"));
872 Emsg0(M_FATAL, 0, dev->errmsg);
876 if (!(dev_state(dev, ST_TAPE))) {
879 Dmsg0(29, "fsr_dev\n");
880 dev->block_num += num;
881 mt_com.mt_op = MTFSR;
882 mt_com.mt_count = num;
883 stat = ioctl(dev->fd, MTIOCTOP, (char *)&mt_com);
885 dev->state &= ~ST_EOF;
887 if (dev->state & ST_EOF) {
888 dev->state |= ST_EOT;
890 dev->state |= ST_EOF; /* assume EOF */
894 clrerror_dev(dev, MTFSR);
895 Mmsg2(&dev->errmsg, _("ioctl MTFSR error on %s. ERR=%s.\n"),
896 dev->dev_name, strerror(dev->dev_errno));
899 return stat == 0 ? 1 : 0;
903 * Backward space a record
904 * Returns: 0 on failure
908 bsr_dev(DEVICE *dev, int num)
914 dev->dev_errno = EBADF;
915 Mmsg0(&dev->errmsg, _("Bad call to bsr_dev. Archive not open\n"));
916 Emsg0(M_FATAL, 0, dev->errmsg);
920 if (!(dev->state & ST_TAPE)) {
924 if (!dev_cap(dev, CAP_BSR)) {
925 Mmsg1(&dev->errmsg, _("ioctl MTBSR not permitted on %s.\n"),
930 Dmsg0(29, "bsr_dev\n");
931 dev->block_num -= num;
932 dev->state &= ~(ST_EOF|ST_EOT|ST_EOF);
933 mt_com.mt_op = MTBSR;
934 mt_com.mt_count = num;
935 stat = ioctl(dev->fd, MTIOCTOP, (char *)&mt_com);
937 clrerror_dev(dev, MTBSR);
938 Mmsg2(&dev->errmsg, _("ioctl MTBSR error on %s. ERR=%s.\n"),
939 dev->dev_name, strerror(dev->dev_errno));
942 return stat == 0 ? 1 : 0;
946 * Reposition the device to file, block
947 * Currently only works for tapes.
948 * Returns: 0 on failure
952 reposition_dev(DEVICE *dev, uint32_t file, uint32_t block)
955 dev->dev_errno = EBADF;
956 Mmsg0(&dev->errmsg, _("Bad call to reposition_dev. Archive not open\n"));
957 Emsg0(M_FATAL, 0, dev->errmsg);
961 if (!(dev_state(dev, ST_TAPE))) {
964 Dmsg4(100, "reposition_dev from %u:%u to %u:%u\n",
965 dev->file, dev->block_num, file, block);
966 if (file < dev->file) {
967 Dmsg0(100, "Rewind_dev\n");
968 if (!rewind_dev(dev)) {
972 if (file > dev->file) {
973 Dmsg1(100, "fsf %d\n", file-dev->file);
974 if (!fsf_dev(dev, file-dev->file)) {
978 if (block < dev->block_num) {
982 if (block > dev->block_num) {
983 /* Ignore errors as Bacula can read to the correct block */
984 Dmsg1(100, "fsr %d\n", block-dev->block_num);
985 fsr_dev(dev, block-dev->block_num);
993 * Write an end of file on the device
994 * Returns: 0 on success
995 * non-zero on failure
998 weof_dev(DEVICE *dev, int num)
1004 dev->dev_errno = EBADF;
1005 Mmsg0(&dev->errmsg, _("Bad call to weof_dev. Archive not open\n"));
1006 Emsg0(M_FATAL, 0, dev->errmsg);
1010 if (!(dev->state & ST_TAPE)) {
1013 dev->state &= ~(ST_EOT | ST_EOF); /* remove EOF/EOT flags */
1015 Dmsg0(29, "weof_dev\n");
1016 mt_com.mt_op = MTWEOF;
1017 mt_com.mt_count = num;
1018 stat = ioctl(dev->fd, MTIOCTOP, (char *)&mt_com);
1023 clrerror_dev(dev, MTWEOF);
1024 Mmsg2(&dev->errmsg, _("ioctl MTWEOF error on %s. ERR=%s.\n"),
1025 dev->dev_name, strerror(dev->dev_errno));
1031 * Return string message with last error in English
1032 * Be careful not to call this routine from within dev.c
1033 * while editing an Mmsg(&) or you will end up in a recursive
1034 * loop creating a Segmentation Violation.
1037 strerror_dev(DEVICE *dev)
1044 * If implemented in system, clear the tape
1048 clrerror_dev(DEVICE *dev, int func)
1052 dev->dev_errno = errno; /* save errno */
1054 dev->VolCatInfo.VolCatErrors++;
1057 if (!(dev->state & ST_TAPE)) {
1060 if (errno == ENOTTY || errno == ENOSYS) { /* Function not implemented */
1063 Emsg0(M_ABORT, 0, "Got ENOTTY on read/write!\n");
1067 dev->capabilities &= ~CAP_EOF; /* turn off feature */
1072 dev->capabilities &= ~CAP_EOM; /* turn off feature */
1077 dev->capabilities &= ~CAP_FSF; /* turn off feature */
1081 dev->capabilities &= ~CAP_BSF; /* turn off feature */
1085 dev->capabilities &= ~CAP_FSR; /* turn off feature */
1089 dev->capabilities &= ~CAP_BSR; /* turn off feature */
1096 dev->dev_errno = ENOSYS;
1097 Mmsg1(&dev->errmsg, _("This device does not support %s.\n"), msg);
1098 Emsg0(M_ERROR, 0, dev->errmsg);
1101 /* Found on Linux */
1105 mt_com.mt_op = MTIOCLRERR;
1106 mt_com.mt_count = 1;
1107 /* Clear any error condition on the tape */
1108 ioctl(dev->fd, MTIOCTOP, (char *)&mt_com);
1109 Dmsg0(200, "Did MTIOCLRERR\n");
1113 /* Typically on FreeBSD */
1116 /* Read and clear SCSI error status */
1117 union mterrstat mt_errstat;
1118 Pmsg2(000, "Doing MTIOCERRSTAT errno=%d ERR=%s\n", dev->dev_errno,
1119 strerror(dev->dev_errno));
1120 ioctl(dev->fd, MTIOCERRSTAT, (char *)&mt_errstat);
1126 * Flush buffer contents
1129 int flush_dev(DEVICE *dev)
1134 static void do_close(DEVICE *dev)
1137 Dmsg1(29, "really close_dev %s\n", dev->dev_name);
1141 /* Clean up device packet so it can be reused */
1143 dev->state &= ~(ST_OPENED|ST_LABEL|ST_READ|ST_APPEND|ST_EOT|ST_WEOT|ST_EOF);
1144 dev->file = dev->block_num = 0;
1146 dev->EndFile = dev->EndBlock = 0;
1147 memset(&dev->VolCatInfo, 0, sizeof(dev->VolCatInfo));
1148 memset(&dev->VolHdr, 0, sizeof(dev->VolHdr));
1150 stop_thread_timer(dev->tid);
1160 close_dev(DEVICE *dev)
1163 Mmsg0(&dev->errmsg, _("Bad call to close_dev. Archive not open\n"));
1164 Emsg0(M_FATAL, 0, dev->errmsg);
1167 if (dev->fd >= 0 && dev->use_count == 1) {
1169 } else if (dev->use_count > 0) {
1174 ASSERT(dev->use_count >= 0);
1179 * Used when unmounting the device, ignore use_count
1181 void force_close_dev(DEVICE *dev)
1184 Mmsg0(&dev->errmsg, _("Bad call to force_close_dev. Archive not open\n"));
1185 Emsg0(M_FATAL, 0, dev->errmsg);
1188 Dmsg1(29, "Force close_dev %s\n", dev->dev_name);
1192 ASSERT(dev->use_count >= 0);
1196 int truncate_dev(DEVICE *dev)
1198 if (dev->state & ST_TAPE) {
1201 if (ftruncate(dev->fd, 0) != 0) {
1202 Mmsg1(&dev->errmsg, _("Unable to truncate device. ERR=%s\n"), strerror(errno));
1209 dev_is_tape(DEVICE *dev)
1211 return (dev->state & ST_TAPE) ? 1 : 0;
1216 * return 1 if the device is read for write, and 0 otherwise
1217 * This is meant for checking at the end of a job to see
1218 * if we still have a tape (perhaps not if at end of tape
1219 * and the job is canceled).
1222 dev_can_write(DEVICE *dev)
1224 if ((dev->state & ST_OPENED) && (dev->state & ST_APPEND) &&
1225 (dev->state & ST_LABEL) && !(dev->state & ST_WEOT)) {
1233 dev_name(DEVICE *dev)
1235 return dev->dev_name;
1239 dev_vol_name(DEVICE *dev)
1241 return dev->VolCatInfo.VolCatName;
1244 uint32_t dev_block(DEVICE *dev)
1246 update_pos_dev(dev);
1247 return dev->block_num;
1250 uint32_t dev_file(DEVICE *dev)
1252 update_pos_dev(dev);
1257 * Free memory allocated for the device
1260 term_dev(DEVICE *dev)
1263 dev->dev_errno = EBADF;
1264 Mmsg0(&dev->errmsg, _("Bad call to term_dev. Archive not open\n"));
1265 Emsg0(M_FATAL, 0, dev->errmsg);
1269 Dmsg0(29, "term_dev\n");
1270 if (dev->dev_name) {
1271 free_memory(dev->dev_name);
1272 dev->dev_name = NULL;
1275 free_pool_memory(dev->errmsg);
1278 pthread_mutex_destroy(&dev->mutex);
1279 pthread_cond_destroy(&dev->wait);
1280 pthread_cond_destroy(&dev->wait_next_vol);
1281 if (dev->state & ST_MALLOC) {
1282 free_pool_memory((POOLMEM *)dev);
1287 * We attach a jcr to the device so that when
1288 * the Volume is full during writing, a
1289 * JobMedia record will be created for this
1292 void attach_jcr_to_device(DEVICE *dev, JCR *jcr)
1294 jcr->prev_dev = (JCR *)NULL;
1295 jcr->next_dev = dev->attached_jcrs;
1296 if (dev->attached_jcrs) {
1297 dev->attached_jcrs->prev_dev = jcr;
1299 dev->attached_jcrs = jcr;
1300 Dmsg1(100, "Attached Job %s\n", jcr->Job);
1303 void detach_jcr_from_device(DEVICE *dev, JCR *jcr)
1305 if (!jcr->prev_dev) {
1306 dev->attached_jcrs = jcr->next_dev;
1308 jcr->prev_dev->next_dev = jcr->next_dev;
1310 if (jcr->next_dev) {
1311 jcr->next_dev->prev_dev = jcr->prev_dev;
1313 jcr->next_dev = jcr->prev_dev = NULL;
1314 Dmsg1(100, "Detached Job %s\n", jcr->Job);
1317 JCR *next_attached_jcr(DEVICE *dev, JCR *jcr)
1319 if (jcr == (JCR *)NULL) {
1320 return dev->attached_jcrs;
1322 return jcr->next_dev;