2 Bacula® - The Network Backup Solution
4 Copyright (C) 2000-2007 Free Software Foundation Europe e.V.
6 The main author of Bacula is Kern Sibbald, with contributions from
7 many others, a complete list can be found in the file AUTHORS.
8 This program is Free Software; you can redistribute it and/or
9 modify it under the terms of version two of the GNU General Public
10 License as published by the Free Software Foundation plus additions
11 that are listed in the file LICENSE.
13 This program is distributed in the hope that it will be useful, but
14 WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 Bacula® is a registered trademark of John Walker.
24 The licensor of Bacula is the Free Software Foundation Europe
25 (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
26 Switzerland, email:ftf@fsfeurope.org.
29 * Definitions for using the Device functions in Bacula
30 * Tape and File storage access
42 #undef DCR /* used by Bacula */
44 /* #define NEW_LOCK 1 */
46 #define new_lock_device(dev) _new_lock_device(__FILE__, __LINE__, (dev))
47 #define new_lock_device_state(dev,state) _new_lock_device(__FILE__, __LINE__, (dev), (state))
48 #define new_unlock_device(dev) _new_unlock_device(__FILE__, __LINE__, (dev))
50 #define lock_device(d) _lock_device(__FILE__, __LINE__, (d))
51 #define unlock_device(d) _unlock_device(__FILE__, __LINE__, (d))
52 #define block_device(d, s) _block_device(__FILE__, __LINE__, (d), s)
53 #define unblock_device(d) _unblock_device(__FILE__, __LINE__, (d))
54 #define steal_device_lock(d, p, s) _steal_device_lock(__FILE__, __LINE__, (d), (p), s)
55 #define give_back_device_lock(d, p) _give_back_device_lock(__FILE__, __LINE__, (d), (p))
57 /* Return values from wait_for_sysop() */
66 /* Arguments to open_dev() */
68 CREATE_READ_WRITE = 1,
83 /* Generic status bits returned from status_dev() */
84 #define BMT_TAPE (1<<0) /* is tape device */
85 #define BMT_EOF (1<<1) /* just read EOF */
86 #define BMT_BOT (1<<2) /* at beginning of tape */
87 #define BMT_EOT (1<<3) /* end of tape reached */
88 #define BMT_SM (1<<4) /* DDS setmark */
89 #define BMT_EOD (1<<5) /* DDS at end of data */
90 #define BMT_WR_PROT (1<<6) /* tape write protected */
91 #define BMT_ONLINE (1<<7) /* tape online */
92 #define BMT_DR_OPEN (1<<8) /* tape door open */
93 #define BMT_IM_REP_EN (1<<9) /* immediate report enabled */
96 /* Bits for device capabilities */
97 #define CAP_EOF (1<<0) /* has MTWEOF */
98 #define CAP_BSR (1<<1) /* has MTBSR */
99 #define CAP_BSF (1<<2) /* has MTBSF */
100 #define CAP_FSR (1<<3) /* has MTFSR */
101 #define CAP_FSF (1<<4) /* has MTFSF */
102 #define CAP_EOM (1<<5) /* has MTEOM */
103 #define CAP_REM (1<<6) /* is removable media */
104 #define CAP_RACCESS (1<<7) /* is random access device */
105 #define CAP_AUTOMOUNT (1<<8) /* Read device at start to see what is there */
106 #define CAP_LABEL (1<<9) /* Label blank tapes */
107 #define CAP_ANONVOLS (1<<10) /* Mount without knowing volume name */
108 #define CAP_ALWAYSOPEN (1<<11) /* always keep device open */
109 #define CAP_AUTOCHANGER (1<<12) /* AutoChanger */
110 #define CAP_OFFLINEUNMOUNT (1<<13) /* Offline before unmount */
111 #define CAP_STREAM (1<<14) /* Stream device */
112 #define CAP_BSFATEOM (1<<15) /* Backspace file at EOM */
113 #define CAP_FASTFSF (1<<16) /* Fast forward space file */
114 #define CAP_TWOEOF (1<<17) /* Write two eofs for EOM */
115 #define CAP_CLOSEONPOLL (1<<18) /* Close device on polling */
116 #define CAP_POSITIONBLOCKS (1<<19) /* Use block positioning */
117 #define CAP_MTIOCGET (1<<20) /* Basic support for fileno and blkno */
118 #define CAP_REQMOUNT (1<<21) /* Require mount to read files back (typically: DVD) */
119 #define CAP_CHECKLABELS (1<<22) /* Check for ANSI/IBM labels */
122 #define dev_state(dev, st_state) ((dev)->state & (st_state))
124 /* Device state bits */
125 #define ST_XXXXXX (1<<0) /* was ST_OPENED */
126 #define ST_XXXXX (1<<1) /* was ST_TAPE */
127 #define ST_XXXX (1<<2) /* was ST_FILE */
128 #define ST_XXX (1<<3) /* was ST_FIFO */
129 #define ST_XX (1<<4) /* was ST_DVD */
130 #define ST_X (1<<5) /* was ST_PROG */
132 #define ST_LABEL (1<<6) /* label found */
133 #define ST_MALLOC (1<<7) /* dev packet malloc'ed in init_dev() */
134 #define ST_APPEND (1<<8) /* ready for Bacula append */
135 #define ST_READ (1<<9) /* ready for Bacula read */
136 #define ST_EOT (1<<10) /* at end of tape */
137 #define ST_WEOT (1<<11) /* Got EOT on write */
138 #define ST_EOF (1<<12) /* Read EOF i.e. zero bytes */
139 #define ST_NEXTVOL (1<<13) /* Start writing on next volume */
140 #define ST_SHORT (1<<14) /* Short block read */
141 #define ST_MOUNTED (1<<15) /* the device is mounted to the mount point */
142 #define ST_MEDIA (1<<16) /* Media found in mounted device */
143 #define ST_OFFLINE (1<<17) /* set offline by operator */
144 #define ST_PART_SPOOLED (1<<18) /* spooling part */
145 #define ST_FREESPACE_OK (1<<19) /* Have valid freespace for DVD */
147 /* m_blocked states (mutually exclusive) */
149 BST_NOT_BLOCKED = 0, /* not blocked */
150 BST_UNMOUNTED, /* User unmounted device */
151 BST_WAITING_FOR_SYSOP, /* Waiting for operator to mount tape */
152 BST_DOING_ACQUIRE, /* Opening/validating/moving tape */
153 BST_WRITING_LABEL, /* Labeling a tape */
154 BST_UNMOUNTED_WAITING_FOR_SYSOP, /* User unmounted during wait for op */
155 BST_MOUNT /* Mount request */
158 /* Volume Catalog Information structure definition */
159 struct VOLUME_CAT_INFO {
160 /* Media info for the current Volume */
161 uint32_t VolCatJobs; /* number of jobs on this Volume */
162 uint32_t VolCatFiles; /* Number of files */
163 uint32_t VolCatBlocks; /* Number of blocks */
164 uint64_t VolCatBytes; /* Number of bytes written */
165 uint32_t VolCatParts; /* Number of parts written */
166 uint32_t VolCatMounts; /* Number of mounts this volume */
167 uint32_t VolCatErrors; /* Number of errors this volume */
168 uint32_t VolCatWrites; /* Number of writes this volume */
169 uint32_t VolCatReads; /* Number of reads this volume */
170 uint64_t VolCatRBytes; /* Number of bytes read */
171 uint32_t VolCatRecycles; /* Number of recycles this volume */
172 uint32_t EndFile; /* Last file number */
173 uint32_t EndBlock; /* Last block number */
174 int32_t LabelType; /* Bacula/ANSI/IBM */
175 int32_t Slot; /* >0=Slot loaded, 0=nothing, -1=unknown */
176 uint32_t VolCatMaxJobs; /* Maximum Jobs to write to volume */
177 uint32_t VolCatMaxFiles; /* Maximum files to write to volume */
178 uint64_t VolCatMaxBytes; /* Max bytes to write to volume */
179 uint64_t VolCatCapacityBytes; /* capacity estimate */
180 btime_t VolReadTime; /* time spent reading */
181 btime_t VolWriteTime; /* time spent writing this Volume */
182 int64_t VolMediaId; /* MediaId */
183 utime_t VolFirstWritten; /* Time of first write */
184 bool InChanger; /* Set if vol in current magazine */
185 char VolCatStatus[20]; /* Volume status */
186 char VolCatName[MAX_NAME_LENGTH]; /* Desired volume to mount */
190 typedef struct s_steal_lock {
191 pthread_t no_wait_id; /* id of no wait thread */
192 int dev_blocked; /* state */
193 int dev_prev_blocked; /* previous blocked state */
196 class DEVRES; /* Device resource defined in stored_conf.h */
198 class DCR; /* forward reference */
200 * Device structure definition. There is one of these for
201 * each physical device. Everything here is "global" to
202 * that device and effects all jobs using the device.
206 int m_fd; /* file descriptor */
207 int m_blocked; /* set if we must wait (i.e. change tape) */
209 dlist *attached_dcrs; /* attached DCR list */
210 pthread_mutex_t m_mutex; /* access control */
211 pthread_mutex_t spool_mutex; /* mutex for updating spool_size */
212 pthread_cond_t wait; /* thread wait variable */
213 pthread_cond_t wait_next_vol; /* wait for tape to be mounted */
214 pthread_t no_wait_id; /* this thread must not wait */
215 int dev_prev_blocked; /* previous blocked state */
216 int num_waiting; /* number of threads waiting */
217 int num_writers; /* number of writing threads */
218 int reserved_device; /* number of device reservations */
220 /* New access control in process of being implemented */
221 // brwlock_t xlock; /* New mutual exclusion lock */
223 int capabilities; /* capabilities mask */
224 int state; /* state mask */
225 int dev_errno; /* Our own errno */
226 int mode; /* read/write modes */
227 int openmode; /* parameter passed to open_dev (useful to reopen the device) */
228 int dev_type; /* device type */
229 bool autoselect; /* Autoselect in autochanger */
230 int label_type; /* Bacula/ANSI/IBM label types */
231 uint32_t drive_index; /* Autochanger drive index (base 0) */
232 int32_t Slot; /* Slot currently in drive (base 1) */
233 POOLMEM *dev_name; /* Physical device name */
234 POOLMEM *prt_name; /* Name used for display purposes */
235 char *errmsg; /* nicely edited error message */
236 uint32_t block_num; /* current block number base 0 */
237 uint32_t file; /* current file number base 0 */
238 uint64_t file_addr; /* Current file read/write address */
239 uint64_t file_size; /* Current file size */
240 uint32_t EndBlock; /* last block written */
241 uint32_t EndFile; /* last file written */
242 uint32_t min_block_size; /* min block size */
243 uint32_t max_block_size; /* max block size */
244 uint64_t max_volume_size; /* max bytes to put on one volume */
245 uint64_t max_file_size; /* max file size to put in one file on volume */
246 uint64_t volume_capacity; /* advisory capacity */
247 uint64_t max_spool_size; /* maximum spool file size */
248 uint64_t spool_size; /* current spool size for this device */
249 uint32_t max_rewind_wait; /* max secs to allow for rewind */
250 uint32_t max_open_wait; /* max secs to allow for open */
251 uint32_t max_open_vols; /* max simultaneous open volumes */
253 uint64_t max_part_size; /* max part size */
254 uint64_t part_size; /* current part size */
255 uint32_t part; /* current part number (starts at 0) */
256 uint64_t part_start; /* current part start address (relative to the whole volume) */
257 uint32_t num_dvd_parts; /* number of parts WRITTEN on the DVD */
258 /* state ST_FREESPACE_OK is set if free_space is valid */
259 uint64_t free_space; /* current free space on medium (without the current part) */
260 int free_space_errno; /* indicates errno getting freespace */
261 bool truncating; /* if set, we are currently truncating the DVD */
262 bool blank_dvd; /* if set, we have a blank DVD in the drive */
265 utime_t vol_poll_interval; /* interval between polling Vol mount */
266 DEVRES *device; /* pointer to Device Resource */
267 btimer_t *tid; /* timer id */
269 VOLUME_CAT_INFO VolCatInfo; /* Volume Catalog Information */
270 VOLUME_LABEL VolHdr; /* Actual volume label */
271 char pool_name[MAX_NAME_LENGTH]; /* pool name */
272 char pool_type[MAX_NAME_LENGTH]; /* pool type */
274 /* Device wait times ***FIXME*** look at durations */
275 char BadVolName[MAX_NAME_LENGTH]; /* Last wrong Volume mounted */
276 bool poll; /* set to poll Volume */
284 btime_t last_timer; /* used by read/write/seek to get stats (usec) */
285 btime_t last_tick; /* contains last read/write time (usec) */
288 btime_t DevWriteTime;
289 uint64_t DevWriteBytes;
290 uint64_t DevReadBytes;
293 btime_t get_timer_count(); /* return the last timer interval (ms) */
295 int has_cap(int cap) const { return capabilities & cap; }
296 void clear_cap(int cap) { capabilities &= ~cap; }
297 void set_cap(int cap) { capabilities |= cap; }
298 int is_autochanger() const { return capabilities & CAP_AUTOCHANGER; }
299 int requires_mount() const { return capabilities & CAP_REQMOUNT; }
300 int is_removable() const { return capabilities & CAP_REM; }
301 int is_tape() const { return dev_type == B_TAPE_DEV; }
302 int is_file() const { return dev_type == B_FILE_DEV; }
303 int is_fifo() const { return dev_type == B_FIFO_DEV; }
304 int is_dvd() const { return dev_type == B_DVD_DEV; }
305 int is_prog() const { return dev_type == B_PROG_DEV; }
306 int is_open() const { return m_fd >= 0; }
307 int is_offline() const { return state & ST_OFFLINE; }
308 int is_labeled() const { return state & ST_LABEL; }
309 int is_mounted() const { return state & ST_MOUNTED; }
310 int is_part_spooled() const { return state & ST_PART_SPOOLED; }
311 int have_media() const { return state & ST_MEDIA; }
312 int is_short_block() const { return state & ST_SHORT; }
313 int is_busy() const { return (state & ST_READ) || num_writers || reserved_device; }
314 int at_eof() const { return state & ST_EOF; }
315 int at_eot() const { return state & ST_EOT; }
316 int at_weot() const { return state & ST_WEOT; }
317 int can_append() const { return state & ST_APPEND; }
318 int is_freespace_ok() const { return state & ST_FREESPACE_OK; }
320 * can_write() is meant for checking at the end of a job to see
321 * if we still have a tape (perhaps not if at end of tape
322 * and the job is canceled).
324 int can_write() const { return is_open() && can_append() &&
325 is_labeled() && !at_weot(); }
326 int can_read() const { return state & ST_READ; }
327 bool can_steal_lock() const { return m_blocked &&
328 (m_blocked == BST_UNMOUNTED ||
329 m_blocked == BST_WAITING_FOR_SYSOP ||
330 m_blocked == BST_UNMOUNTED_WAITING_FOR_SYSOP); };
331 bool waiting_for_mount() const { return
332 (m_blocked == BST_UNMOUNTED ||
333 m_blocked == BST_WAITING_FOR_SYSOP ||
334 m_blocked == BST_UNMOUNTED_WAITING_FOR_SYSOP); };
335 const char *strerror() const;
336 const char *archive_name() const;
337 const char *name() const;
338 const char *print_name() const; /* Name for display purposes */
339 void set_ateof(); /* in dev.c */
340 void set_ateot(); /* in dev.c */
341 void set_eot() { state |= ST_EOT; };
342 void set_eof() { state |= ST_EOF; };
343 void set_append() { state |= ST_APPEND; };
344 void set_labeled() { state |= ST_LABEL; };
345 inline void set_read() { state |= ST_READ; };
346 void set_offline() { state |= ST_OFFLINE; };
347 void set_mounted() { state |= ST_MOUNTED; };
348 void set_media() { state |= ST_MEDIA; };
349 void set_short_block() { state |= ST_SHORT; };
350 void set_freespace_ok() { state |= ST_FREESPACE_OK; }
351 void set_part_spooled(int val) { if (val) state |= ST_PART_SPOOLED; \
352 else state &= ~ST_PART_SPOOLED;
354 void set_mounted(int val) { if (val) state |= ST_MOUNTED; \
355 else state &= ~ST_MOUNTED; };
356 void clear_append() { state &= ~ST_APPEND; };
357 void clear_read() { state &= ~ST_READ; };
358 void clear_labeled() { state &= ~ST_LABEL; };
359 void clear_offline() { state &= ~ST_OFFLINE; };
360 void clear_eot() { state &= ~ST_EOT; };
361 void clear_eof() { state &= ~ST_EOF; };
362 void clear_opened() { m_fd = -1; };
363 void clear_mounted() { state &= ~ST_MOUNTED; };
364 void clear_media() { state &= ~ST_MEDIA; };
365 void clear_short_block() { state &= ~ST_SHORT; };
366 void clear_freespace_ok() { state &= ~ST_FREESPACE_OK; };
367 char *bstrerror(void) { return errmsg; };
368 char *print_errmsg() { return errmsg; };
369 void lock() { P(m_mutex); }
370 void unlock() { V(m_mutex); }
372 void block(int why); /* in dev.c */
373 void unblock(); /* in dev.c */
374 void close(); /* in dev.c */
375 void close_part(DCR *dcr); /* in dev.c */
376 bool truncate(DCR *dcr); /* in dev.c */
377 int open(DCR *dcr, int mode); /* in dev.c */
378 void term(void); /* in dev.c */
379 ssize_t read(void *buf, size_t len); /* in dev.c */
380 ssize_t write(const void *buf, size_t len); /* in dev.c */
381 bool rewind(DCR *dcr); /* in dev.c */
382 bool mount(int timeout); /* in dev.c */
383 bool unmount(int timeout); /* in dev.c */
384 void edit_mount_codes(POOL_MEM &omsg, const char *imsg); /* in dev.c */
385 bool offline_or_rewind(); /* in dev.c */
386 bool offline(); /* in dev.c */
387 bool bsf(int count); /* in dev.c */
388 bool eod(DCR *dcr); /* in dev.c */
389 bool fsr(int num); /* in dev.c */
390 bool fsf(int num); /* in dev.c */
391 bool bsr(int num); /* in dev.c */
392 bool weof(int num); /* in dev.c */
393 void lock_door(); /* in dev.c */
394 void unlock_door(); /* in dev.c */
395 int32_t get_os_tape_file(); /* in dev.c */
396 bool scan_dir_for_volume(DCR *dcr); /* in scan.c */
397 bool reposition(DCR *dcr, uint32_t rfile, uint32_t rblock); /* in dev.c */
398 void clrerror(int func); /* in dev.c */
399 boffset_t lseek(DCR *dcr, boffset_t offset, int whence); /* in dev.c */
400 bool update_pos(DCR *dcr); /* in dev.c */
401 bool update_freespace(); /* in dvd.c */
403 void set_blocked(int block) { m_blocked = block; };
404 int blocked() const { return m_blocked; };
405 uint32_t get_file() const { return file; };
406 uint32_t get_block() const { return block_num; };
407 const char *print_blocked() const; /* in dev.c */
408 bool is_blocked() const { return m_blocked != BST_NOT_BLOCKED; };
409 int fd() const { return m_fd; };
412 bool do_mount(int mount, int timeout); /* in dev.c */
413 void set_mode(int omode); /* in dev.c */
414 void open_tape_device(DCR *dcr, int omode); /* in dev.c */
415 void open_file_device(DCR *dcr, int omode); /* in dev.c */
416 void open_dvd_device(DCR *dcr, int omode); /* in dev.c */
419 /* Note, these return int not bool! */
420 inline const char *DEVICE::strerror() const { return errmsg; }
421 inline const char *DEVICE::archive_name() const { return dev_name; }
422 inline const char *DEVICE::print_name() const { return prt_name; }
425 * Device Context (or Control) Record.
426 * There is one of these records for each Job that is using
427 * the device. Items in this record are "local" to the Job and
428 * do not affect other Jobs. Note, a job can have multiple
429 * DCRs open, each pointing to a different device.
433 dlink dev_link; /* link to attach to dev */
434 JCR *jcr; /* pointer to JCR */
435 DEVICE *dev; /* pointer to device */
436 DEVRES *device; /* pointer to device resource */
437 DEV_BLOCK *block; /* pointer to block */
438 DEV_RECORD *rec; /* pointer to record */
439 int spool_fd; /* fd if spooling */
440 bool spool_data; /* set to spool data */
441 bool spooling; /* set when actually spooling */
442 bool despooling; /* set when despooling */
443 bool despool_wait; /* waiting for despooling */
444 bool dev_locked; /* set if dev already locked */
445 bool NewVol; /* set if new Volume mounted */
446 bool WroteVol; /* set if Volume written */
447 bool NewFile; /* set when EOF written */
448 bool reserved_device; /* set if reserve done */
449 bool any_volume; /* Any OK for dir_find_next... */
450 bool attached_to_dev; /* set when attached to dev */
451 uint32_t VolFirstIndex; /* First file index this Volume */
452 uint32_t VolLastIndex; /* Last file index this Volume */
453 uint32_t FileIndex; /* Current File Index */
454 uint32_t EndFile; /* End file written */
455 uint32_t StartFile; /* Start write file */
456 uint32_t StartBlock; /* Start write block */
457 uint32_t EndBlock; /* Ending block written */
458 int64_t job_spool_size; /* Current job spool size */
459 int64_t max_job_spool_size; /* Max job spool size */
460 char VolumeName[MAX_NAME_LENGTH]; /* Volume name */
461 char pool_name[MAX_NAME_LENGTH]; /* pool name */
462 char pool_type[MAX_NAME_LENGTH]; /* pool type */
463 char media_type[MAX_NAME_LENGTH]; /* media type */
464 char dev_name[MAX_NAME_LENGTH]; /* dev name */
465 int Copy; /* identical copy number */
466 int Stripe; /* RAIT stripe */
467 VOLUME_CAT_INFO VolCatInfo; /* Catalog info for desired volume */
471 * Volume reservation class -- see reserve.c
482 /* Get some definition of function to position
483 * to the end of the medium in MTEOM. System
484 * dependent. Arrgggg!