2 Bacula® - The Network Backup Solution
4 Copyright (C) 2000-2012 Free Software Foundation Europe e.V.
6 The main author of Bacula is Kern Sibbald, with contributions from
7 many others, a complete list can be found in the file AUTHORS.
8 This program is Free Software; you can redistribute it and/or
9 modify it under the terms of version three of the GNU Affero General Public
10 License as published by the Free Software Foundation and included
13 This program is distributed in the hope that it will be useful, but
14 WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 General Public License for more details.
18 You should have received a copy of the GNU Affero General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
23 Bacula® is a registered trademark of Kern Sibbald.
24 The licensor of Bacula is the Free Software Foundation Europe
25 (FSFE), Fiduciary Program, Sumatrastrasse 25, 8006 Zürich,
26 Switzerland, email:ftf@fsfeurope.org.
29 * Volume management functions for Storage Daemon
33 * Split from reserve.c October 2008
40 const int dbglvl = 150;
42 static dlist *vol_list = NULL;
43 static brwlock_t vol_list_lock;
44 static dlist *read_vol_list = NULL;
45 static bthread_mutex_t read_vol_lock = BTHREAD_MUTEX_PRIORITY(PRIO_SD_READ_VOL_LIST);
47 /* Forward referenced functions */
48 static void free_vol_item(VOLRES *vol);
49 static VOLRES *new_vol_item(DCR *dcr, const char *VolumeName);
50 static void debug_list_volumes(const char *imsg);
53 * For append volumes the key is the VolumeName.
55 static int my_compare(void *item1, void *item2)
57 return strcmp(((VOLRES *)item1)->vol_name, ((VOLRES *)item2)->vol_name);
61 * For read volumes the key is JobId, VolumeName.
63 static int read_compare(void *item1, void *item2)
65 VOLRES *vol1 = (VOLRES *)item1;
66 VOLRES *vol2 = (VOLRES *)item2;
68 if (vol1->get_jobid() == vol2->get_jobid()) {
69 return strcmp(vol1->vol_name, vol2->vol_name);
71 if (vol1->get_jobid() < vol2->get_jobid()) {
78 bool is_vol_list_empty()
80 return vol_list->empty();
83 int vol_list_lock_count = 0;
86 * Initialized the main volume list. Note, we are using a recursive lock.
88 void init_vol_list_lock()
91 if ((errstat=rwl_init(&vol_list_lock, PRIO_SD_VOL_LIST)) != 0) {
93 Emsg1(M_ABORT, 0, _("Unable to initialize volume list lock. ERR=%s\n"),
94 be.bstrerror(errstat));
98 void term_vol_list_lock()
100 rwl_destroy(&vol_list_lock);
104 * This allows a given thread to recursively call to lock_volumes()
106 void _lock_volumes(const char *file, int line)
109 vol_list_lock_count++;
110 if ((errstat=rwl_writelock_p(&vol_list_lock, file, line)) != 0) {
112 Emsg2(M_ABORT, 0, "rwl_writelock failure. stat=%d: ERR=%s\n",
113 errstat, be.bstrerror(errstat));
117 void _unlock_volumes()
120 vol_list_lock_count--;
121 if ((errstat=rwl_writeunlock(&vol_list_lock)) != 0) {
123 Emsg2(M_ABORT, 0, "rwl_writeunlock failure. stat=%d: ERR=%s\n",
124 errstat, be.bstrerror(errstat));
128 void lock_read_volumes(const char *file="**Unknown", int line=0)
130 bthread_mutex_lock_p(&read_vol_lock, file, line);
133 void unlock_read_volumes()
135 bthread_mutex_unlock(&read_vol_lock);
139 * Add a volume to the read list.
140 * Note, we use VOLRES because it simplifies the code
141 * even though, the only part of VOLRES that we need is
142 * the volume name. The same volume may be in the list
143 * multiple times, but each one is distinguished by the
144 * JobId. We use JobId, VolumeName as the key.
145 * We can get called multiple times for the same volume because
146 * when parsing the bsr, the volume name appears multiple times.
148 void add_read_volume(JCR *jcr, const char *VolumeName)
153 nvol = new_vol_item(NULL, VolumeName);
154 nvol->set_jobid(jcr->JobId);
155 vol = (VOLRES *)read_vol_list->binary_insert(nvol, read_compare);
158 Dmsg2(dbglvl, "read_vol=%s JobId=%d already in list.\n", VolumeName, jcr->JobId);
160 Dmsg2(dbglvl, "add read_vol=%s JobId=%d\n", VolumeName, jcr->JobId);
162 unlock_read_volumes();
166 * Remove a given volume name from the read list.
168 void remove_read_volume(JCR *jcr, const char *VolumeName)
172 vol.vol_name = bstrdup(VolumeName);
173 vol.set_jobid(jcr->JobId);
174 fvol = (VOLRES *)read_vol_list->binary_search(&vol, read_compare);
177 Dmsg3(dbglvl, "remove_read_vol=%s JobId=%d found=%d\n", VolumeName, jcr->JobId, fvol!=NULL);
180 read_vol_list->remove(fvol);
183 unlock_read_volumes();
187 * List Volumes -- this should be moved to status.c
194 static void debug_list_volumes(const char *imsg)
197 POOL_MEM msg(PM_MESSAGE);
200 foreach_dlist(vol, vol_list) {
202 Mmsg(msg, "List %s: %s in_use=%d swap=%d on device %s\n", imsg,
203 vol->vol_name, vol->is_in_use(), vol->is_swapping(), vol->dev->print_name());
205 Mmsg(msg, "List %s: %s in_use=%d swap=%d no dev\n", imsg, vol->vol_name,
206 vol->is_in_use(), vol->is_swapping());
208 Dmsg1(dbglvl, "%s", msg.c_str());
216 * List Volumes -- this should be moved to status.c
218 void list_volumes(void sendit(const char *msg, int len, void *sarg), void *arg)
221 POOL_MEM msg(PM_MESSAGE);
225 foreach_dlist(vol, vol_list) {
226 DEVICE *dev = vol->dev;
228 len = Mmsg(msg, "%s on device %s\n", vol->vol_name, dev->print_name());
229 sendit(msg.c_str(), len, arg);
230 len = Mmsg(msg, " Reader=%d writers=%d devres=%d volinuse=%d\n",
231 dev->can_read()?1:0, dev->num_writers, dev->num_reserved(),
233 sendit(msg.c_str(), len, arg);
235 len = Mmsg(msg, "%s no device. volinuse= %d\n", vol->vol_name,
237 sendit(msg.c_str(), len, arg);
243 foreach_dlist(vol, read_vol_list) {
244 len = Mmsg(msg, "%s read volume JobId=%d\n", vol->vol_name,
246 sendit(msg.c_str(), len, arg);
248 unlock_read_volumes();
253 * Create a Volume item to put in the Volume list
254 * Ensure that the device points to it.
256 static VOLRES *new_vol_item(DCR *dcr, const char *VolumeName)
259 vol = (VOLRES *)malloc(sizeof(VOLRES));
260 memset(vol, 0, sizeof(VOLRES));
261 vol->vol_name = bstrdup(VolumeName);
264 Dmsg3(dbglvl, "new Vol=%s at %p dev=%s\n",
265 VolumeName, vol->vol_name, vol->dev->print_name());
270 static void free_vol_item(VOLRES *vol)
285 * Put a new Volume entry in the Volume list. This
286 * effectively reserves the volume so that it will
287 * not be mounted again.
289 * If the device has any current volume associated with it,
290 * and it is a different Volume, and the device is not busy,
291 * we release the old Volume item and insert the new one.
293 * It is assumed that the device is free and locked so that
294 * we can change the device structure.
296 * Some details of the Volume list handling:
298 * 1. The Volume list entry must be attached to the drive (rather than
299 * attached to a job as it currently is. I.e. the drive that "owns"
300 * the volume (in use, mounted)
301 * must point to the volume (still to be maintained in a list).
303 * 2. The Volume is entered in the list when a drive is reserved.
305 * 3. When a drive is in use, the device code must appropriately update the
306 * volume name as it changes (currently the list is static -- an entry is
307 * removed when the Volume is no longer reserved, in use or mounted).
308 * The new code must keep the same list entry as long as the drive
309 * has any volume associated with it but the volume name in the list
310 * must be updated when the drive has a different volume mounted.
312 * 4. A job that has reserved a volume, can un-reserve the volume, and if the
313 * volume is not mounted, and not reserved, and not in use, it will be
314 * removed from the list.
316 * 5. If a job wants to reserve a drive with a different Volume from the one on
317 * the drive, it can re-use the drive for the new Volume.
319 * 6. If a job wants a Volume that is in a different drive, it can either use the
320 * other drive or take the volume, only if the other drive is not in use or
323 * One nice aspect of this is that the reserve use count and the writer use count
324 * already exist and are correctly programmed and will need no changes -- use
325 * counts are always very tricky.
327 * The old code had a concept of "reserving" a Volume, but was changed
328 * to reserving and using a drive. A volume is must be attached to (owned by) a
329 * drive and can move from drive to drive or be unused given certain specific
330 * conditions of the drive. The key is that the drive must "own" the Volume.
331 * The old code had the job (dcr) owning the volume (more or less). The job was
332 * to change the insertion and removal of the volumes from the list to be based
333 * on the drive rather than the job.
335 * Return: VOLRES entry on success
336 * NULL volume busy on another drive
338 VOLRES *reserve_volume(DCR *dcr, const char *VolumeName)
341 DEVICE * volatile dev = dcr->dev;
343 if (job_canceled(dcr->jcr)) {
348 Dmsg2(dbglvl, "enter reserve_volume=%s drive=%s\n", VolumeName,
349 dcr->dev->print_name());
351 * We lock the reservations system here to ensure
352 * when adding a new volume that no newly scheduled
353 * job can reserve it.
356 debug_list_volumes("begin reserve_volume");
358 * First, remove any old volume attached to this device as it
363 Dmsg4(dbglvl, "Vol attached=%s, newvol=%s volinuse=%d on %s\n",
364 vol->vol_name, VolumeName, vol->is_in_use(), dev->print_name());
366 * Make sure we don't remove the current volume we are inserting
367 * because it was probably inserted by another job, or it
368 * is not being used and is marked as not reserved.
370 if (strcmp(vol->vol_name, VolumeName) == 0) {
371 Dmsg2(dbglvl, "=== set reserved vol=%s dev=%s\n", VolumeName,
372 vol->dev->print_name());
373 goto get_out; /* Volume already on this device */
375 /* Don't release a volume if it was reserved by someone other than us */
376 if (vol->is_in_use() && !dcr->reserved_volume) {
377 Dmsg1(dbglvl, "Cannot free vol=%s. It is reserved.\n", vol->vol_name);
378 vol = NULL; /* vol in use */
381 Dmsg2(dbglvl, "reserve_vol free vol=%s at %p\n", vol->vol_name, vol->vol_name);
382 /* If old Volume is still mounted, must unload it */
383 if (strcmp(vol->vol_name, dev->VolHdr.VolumeName) == 0) {
384 Dmsg0(50, "set_unload\n");
385 dev->set_unload(); /* have to unload current volume */
387 free_volume(dev); /* Release old volume entry */
388 debug_list_volumes("reserve_vol free");
392 /* Create a new Volume entry */
393 nvol = new_vol_item(dcr, VolumeName);
396 * Now try to insert the new Volume
398 vol = (VOLRES *)vol_list->binary_insert(nvol, my_compare);
400 Dmsg2(dbglvl, "Found vol=%s dev-same=%d\n", vol->vol_name, dev==vol->dev);
402 * At this point, a Volume with this name already is in the list,
403 * so we simply release our new Volume entry. Note, this should
404 * only happen if we are moving the volume from one drive to another.
406 Dmsg2(dbglvl, "reserve_vol free-tmp vol=%s at %p\n",
407 vol->vol_name, vol->vol_name);
409 * Clear dev pointer so that free_vol_item() doesn't
410 * take away our volume.
412 nvol->dev = NULL; /* don't zap dev entry */
416 Dmsg2(dbglvl, "dev=%s vol->dev=%s\n", dev->print_name(), vol->dev->print_name());
420 * Check if we are trying to use the Volume on a different drive
422 * vol->dev is where the Volume we want is
424 if (dev != vol->dev) {
425 /* Caller wants to switch Volume to another device */
426 if (!vol->dev->is_busy() && !vol->is_swapping()) {
428 Dmsg3(dbglvl, "==== Swap vol=%s from dev=%s to %s\n",
429 VolumeName, vol->dev->print_name(), dev->print_name());
430 free_volume(dev); /* free any volume attached to our drive */
431 Dmsg1(50, "set_unload dev=%s\n", dev->print_name());
432 dev->set_unload(); /* Unload any volume that is on our drive */
433 dcr->dev = vol->dev; /* temp point to other dev */
434 slot = get_autochanger_loaded_slot(dcr); /* get slot on other drive */
435 dcr->dev = dev; /* restore dev */
436 vol->set_slot(slot); /* save slot */
437 vol->dev->set_unload(); /* unload the other drive */
438 vol->set_swapping(); /* swap from other drive */
439 dev->swap_dev = vol->dev; /* remember to get this vol */
440 dev->set_load(); /* then reload on our drive */
441 vol->dev->vol = NULL; /* remove volume from other drive */
442 vol->dev = dev; /* point the Volume at our drive */
443 dev->vol = vol; /* point our drive at the Volume */
445 Dmsg5(dbglvl, "==== Swap not possible Vol busy=%d swap=%d vol=%s from dev=%s to %s\n",
446 vol->dev->is_busy(), vol->is_swapping(),
447 VolumeName, vol->dev->print_name(), dev->print_name());
448 if (vol->is_swapping() && dev->swap_dev) {
449 Dmsg3(dbglvl, "Swap failed vol=%s from=%s to dev=%s\n",
450 vol->vol_name, dev->swap_dev->print_name(), dev->print_name());
452 Dmsg3(dbglvl, "Swap failed vol=%s from=%p to dev=%s\n",
453 vol->vol_name, dev->swap_dev, dev->print_name());
455 debug_list_volumes("failed swap");
456 vol = NULL; /* device busy */
463 dev->vol = vol; /* point to newly inserted volume */
468 Dmsg2(dbglvl, "=== set in_use. vol=%s dev=%s\n", vol->vol_name,
469 vol->dev->print_name());
471 dcr->reserved_volume = true;
472 bstrncpy(dcr->VolumeName, vol->vol_name, sizeof(dcr->VolumeName));
474 debug_list_volumes("end new volume");
480 * Switch from current device to given device
484 void switch_device(DCR *dcr, DEVICE *dev)
489 memcpy(&save_dcr, dcr, sizeof(save_dcr));
490 clean_device(dcr); /* clean up the dcr */
492 dcr->dev = dev; /* get new device pointer */
493 Jmsg(dcr->jcr, M_INFO, 0, _("Device switch. New device %s chosen.\n"),
494 dcr->dev->print_name());
496 bstrncpy(dcr->VolumeName, save_dcr.VolumeName, sizeof(dcr->VolumeName));
497 bstrncpy(dcr->media_type, save_dcr.media_type, sizeof(dcr->media_type));
498 dcr->VolCatInfo.Slot = save_dcr.VolCatInfo.Slot;
499 bstrncpy(dcr->pool_name, save_dcr.pool_name, sizeof(dcr->pool_name));
500 bstrncpy(dcr->pool_type, save_dcr.pool_type, sizeof(dcr->pool_type));
501 bstrncpy(dcr->dev_name, dev->dev_name, sizeof(dcr->dev_name));
503 // dcr->set_reserved();
510 * Search for a Volume name in the Volume list.
512 * Returns: VOLRES entry on success
513 * NULL if the Volume is not in the list
515 VOLRES *find_volume(const char *VolumeName)
519 if (vol_list->empty()) {
522 /* Do not lock reservations here */
524 vol.vol_name = bstrdup(VolumeName);
525 fvol = (VOLRES *)vol_list->binary_search(&vol, my_compare);
527 Dmsg2(dbglvl, "find_vol=%s found=%d\n", VolumeName, fvol!=NULL);
528 debug_list_volumes("find_volume");
534 * Search for a Volume name in the read Volume list.
536 * Returns: VOLRES entry on success
537 * NULL if the Volume is not in the list
539 static VOLRES *find_read_volume(const char *VolumeName)
543 if (read_vol_list->empty()) {
544 Dmsg0(dbglvl, "find_read_vol: read_vol_list empty.\n");
547 /* Do not lock reservations here */
549 vol.vol_name = bstrdup(VolumeName);
550 /* Note, we do want a simple my_compare on volume name only here */
551 fvol = (VOLRES *)read_vol_list->binary_search(&vol, my_compare);
553 Dmsg2(dbglvl, "find_read_vol=%s found=%d\n", VolumeName, fvol!=NULL);
554 unlock_read_volumes();
560 * Free a Volume from the Volume list if it is no longer used
561 * Note, for tape drives we want to remember where the Volume
562 * was when last used, so rather than free the volume entry,
563 * we simply mark it "not reserved" so when the drive is really
564 * needed for another volume, we can reuse it.
566 * Returns: true if the Volume found and "removed" from the list
567 * false if the Volume is not in the list or is in use
569 bool volume_unused(DCR *dcr)
571 DEVICE *dev = dcr->dev;
574 Dmsg1(dbglvl, "vol_unused: no vol on %s\n", dev->print_name());
575 debug_list_volumes("null vol cannot unreserve_volume");
579 Dmsg1(dbglvl, "=== clear in_use vol=%s\n", dev->vol->vol_name);
580 dev->vol->clear_in_use();
582 if (dev->vol->is_swapping()) {
583 Dmsg1(dbglvl, "vol_unused: vol being swapped on %s\n", dev->print_name());
584 debug_list_volumes("swapping vol cannot free_volume");
589 * If this is a tape, we do not free the volume, rather we wait
590 * until the autoloader unloads it, or until another tape is
591 * explicitly read in this drive. This allows the SD to remember
592 * where the tapes are or last were.
594 Dmsg4(dbglvl, "=== set not reserved vol=%s num_writers=%d dev_reserved=%d dev=%s\n",
595 dev->vol->vol_name, dev->num_writers, dev->num_reserved(), dev->print_name());
596 if (dev->is_tape() || dev->is_autochanger()) {
600 * Note, this frees the volume reservation entry, but the
601 * file descriptor remains open with the OS.
603 return free_volume(dev);
608 * Unconditionally release the volume entry
610 bool free_volume(DEVICE *dev)
617 Dmsg1(dbglvl, "No vol on dev %s\n", dev->print_name());
621 /* Don't free a volume while it is being swapped */
622 if (!vol->is_swapping()) {
623 Dmsg1(dbglvl, "=== clear in_use vol=%s\n", vol->vol_name);
625 vol_list->remove(vol);
626 Dmsg2(dbglvl, "=== remove volume %s dev=%s\n", vol->vol_name, dev->print_name());
628 debug_list_volumes("free_volume");
630 Dmsg1(dbglvl, "=== cannot clear swapping vol=%s\n", vol->vol_name);
637 /* Create the Volume list */
638 void create_volume_lists()
641 if (vol_list == NULL) {
642 vol_list = New(dlist(vol, &vol->link));
644 if (read_vol_list == NULL) {
645 read_vol_list = New(dlist(vol, &vol->link));
650 * Free normal append volumes list
652 static void free_volume_list()
657 foreach_dlist(vol, vol_list) {
659 Dmsg2(dbglvl, "free vol_list Volume=%s dev=%s\n", vol->vol_name, vol->dev->print_name());
661 Dmsg1(dbglvl, "free vol_list Volume=%s No dev\n", vol->vol_name);
664 vol->vol_name = NULL;
672 /* Release all Volumes from the list */
673 void free_volume_lists()
677 free_volume_list(); /* normal append list */
681 foreach_dlist(vol, read_vol_list) {
683 Dmsg2(dbglvl, "free read_vol_list Volume=%s dev=%s\n", vol->vol_name, vol->dev->print_name());
685 Dmsg1(dbglvl, "free read_vol_list Volume=%s No dev\n", vol->vol_name);
688 vol->vol_name = NULL;
690 delete read_vol_list;
691 read_vol_list = NULL;
692 unlock_read_volumes();
697 * Determine if caller can write on volume
699 bool DCR::can_i_write_volume()
703 vol = find_read_volume(VolumeName);
705 Dmsg1(100, "Found in read list; cannot write vol=%s\n", VolumeName);
708 return can_i_use_volume();
712 * Determine if caller can read or write volume
714 bool DCR::can_i_use_volume()
719 if (job_canceled(jcr)) {
723 vol = find_volume(VolumeName);
725 Dmsg1(dbglvl, "Vol=%s not in use.\n", VolumeName);
726 goto get_out; /* vol not in list */
728 ASSERT(vol->dev != NULL);
730 if (dev == vol->dev) { /* same device OK */
731 Dmsg1(dbglvl, "Vol=%s on same dev.\n", VolumeName);
734 Dmsg3(dbglvl, "Vol=%s on %s we have %s\n", VolumeName,
735 vol->dev->print_name(), dev->print_name());
737 /* ***FIXME*** check this ... */
738 if (!vol->dev->is_busy()) {
739 Dmsg2(dbglvl, "Vol=%s dev=%s not busy.\n", VolumeName, vol->dev->print_name());
742 Dmsg2(dbglvl, "Vol=%s dev=%s busy.\n", VolumeName, vol->dev->print_name());
744 Dmsg2(dbglvl, "Vol=%s in use by %s.\n", VolumeName, vol->dev->print_name());
754 * Create a temporary copy of the volume list. We do this,
755 * to avoid having the volume list locked during the
756 * call to reserve_device(), which would cause a deadlock.
757 * Note, we may want to add an update counter on the vol_list
758 * so that if it is modified while we are traversing the copy
759 * we can take note and act accordingly (probably redo the
760 * search at least a few times).
762 dlist *dup_vol_list(JCR *jcr)
764 dlist *temp_vol_list;
768 Dmsg0(dbglvl, "lock volumes\n");
770 Dmsg0(dbglvl, "duplicate vol list\n");
771 temp_vol_list = New(dlist(vol, &vol->link));
772 foreach_dlist(vol, vol_list) {
774 VOLRES *tvol = (VOLRES *)malloc(sizeof(VOLRES));
775 memset(tvol, 0, sizeof(VOLRES));
776 tvol->vol_name = bstrdup(vol->vol_name);
777 tvol->dev = vol->dev;
778 nvol = (VOLRES *)temp_vol_list->binary_insert(tvol, my_compare);
780 tvol->dev = NULL; /* don't zap dev entry */
782 Pmsg0(000, "Logic error. Duplicating vol list hit duplicate.\n");
783 Jmsg(jcr, M_WARNING, 0, "Logic error. Duplicating vol list hit duplicate.\n");
786 Dmsg0(dbglvl, "unlock volumes\n");
788 return temp_vol_list;
792 * Free the specified temp list.
794 void free_temp_vol_list(dlist *temp_vol_list)
796 dlist *save_vol_list;
799 save_vol_list = vol_list;
800 vol_list = temp_vol_list;
801 free_volume_list(); /* release temp_vol_list */
802 vol_list = save_vol_list;
803 Dmsg0(dbglvl, "deleted temp vol list\n");
804 Dmsg0(dbglvl, "unlock volumes\n");
806 debug_list_volumes("after free temp table");