1 Technical notes on version 1.39
5 kes Add additional messages when Job canceled automatically for
6 max run time or max start wait exceeded. This fixes bug #621.
7 kes Update maxruntime-test in regression script to properly test
8 max run time -- from info given in bug #621.
9 kes Simplify automatic cancel code.
10 kes Add check for job_canceled() in FD when contacting SD so that if
11 job is canceled from max runtime, it terminates faster.
13 kes Save and restore volume name in stored/mount.c fixed bug #712
14 where wrong tape was requested in a mount.
15 kes Implement cleaner orphan buffer dumping with buf address.
16 kes Fix orphaned buffer when canceling job waiting on op intervention.
17 kes Update projects file for next vote.
18 kes Implement a fix (more could be done) for bug #728 where a double
19 EOF is writing on the Volume when spooling is enabled and the
20 connection with the FD fails (FD crash, comm error).
21 kes Disable attempting to autolabel when polling and device is not
22 a tape. This fixes bug #730 where polling with a removable disk
23 not mounted caused lots of new Volumes to be created then marked
26 kes Enable VSS by default.
28 kes Complete hopefully the last of the copyright transfer changes.
29 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
30 that migration writing to multiple volumes doesn't mess up reading
31 Volumes. This should fix bug #720 -- multivol migration fails.
32 kes Make migration SQL look only for Type='B' jobs to migrate. This should
33 fix bug #724 jobs getting migrated twice.
34 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
35 kes Implement dev->clear_cap() and dev->set_cap() methods.
36 kes Turn off disk seeking on restore for DVDs since I am not 100%
39 kes Implement code that should properly set that a job was migrated,
40 if the migration was successful even if there were no file to
42 kes Apply Richard's patch to fix building or filed/restore.c without
44 kes Ensure that at least one block is written by the SD even if the
45 FD dies or fails -- should fix bug #728.
46 kes Convert stored/record.c ASSERT into a soft fail if the length of
47 a record is too insanely long. This should fix bug #???
49 kes Fix automatic labeling of File volumes, which was broken by new
50 removable device code.
52 kes Remove typedef uLong for HP in baconfig.h. It broke things.
53 lf Fix job byte reporting -- the digest code runs in verify.c and
54 increases this value. The better solution is to digest the
55 stream as we receive it, thus removing the need to re-read
56 from disk at all, but that requires more extensive and
57 potentially destabilizing changes.
58 lf This commit fixes backup and restore of HFS+ resource forks.
59 lf Add a long-missing 'break' statement in HFS+ attribute
60 handling that resulted in restore failures.
62 ebl Fix runscript to always execute command after all job type.
64 Version 1.39.30 released:
66 kes Mark build-depkgs-mingw3 executable in configure process.
67 kes Update autoconf/config.h.in to include LOCALEDIR
68 kes Undefine NLS settings for wxWidgets as there is a conflict with
69 their way of doing things.
70 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
71 kes Change a bunch of ->hdr.name to ->name()
72 kes Straighten out handling of read and write pools for Migration, including
73 getting the code in the proper order.
74 kes Improve migration error messages and debug output.
75 kes Shorten code path in migration if nothing found to do.
76 kes Implement read/write pool in migration job report.
77 kes Move ua_run.c select_job_level code into a subroutine (readability).
78 kes Move ua_run.c display_job_parameters into a subroutine.
79 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
80 restore dependent on a valid catalog containing the Volume name.
82 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
83 make it easier for the user to change.
84 kes Fail any backup job that tries to use encryption and sparse options.
85 Hopefully this is a temporary change.
86 kes Correct the EndJob return string for non-backup jobs.
87 kes Review the encryption restore code.
88 kes Implement a new encryption regression test with compression.
89 kes Modify migrate not to fail if nothing found to migrate.
90 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
91 because they were not always set correctly.
93 kes Update configure.in to include python 2.5 search.
94 kes Back out unwanted migration change reported by Richard Mortimer.
96 kes Make migration with no files to migrate set normal termination.
97 kes Change message when job manually started to say Job queued. ...
98 kes Add job report indication of whether or not VSS and Encryption were
100 kes Modify sparseBlock variable name to make the code clearer.
101 kes Add more sparse tests to regress using gigaslam sparse file
103 kes Enable data encryption code.
104 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
105 only two blocks -- i.e. it is a real sparse file.
107 kes Enable disk seeking on restore.
108 kes Implement the SD 'Block Positioning = yes|no' directive. This
109 allows the user to turn off block level seeking, but restores
111 kes Change the word illegal to read invalid in a few places.
112 kes Fix Win32 build, which broke when I added parse_args_only in
113 lib. I'm not sure I got the entry point right for msvc.
114 kes Turn off data encryption. It can be enabled by defining
115 DATA_ENCRYPTION in src/version.h and recompiling.
116 kes Implement flag to turn off data encryption feature.
117 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
119 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
120 The main problem was that signatures were being generated on blocks
121 of zeros, which is unnecessary.
123 kes Fix scanner (next_arg) to handle leading double quote correctly.
124 kes Modify cd command in restore tree to look at full argument without
125 keywords. This fixes bug #716.
127 kes Do not update Migrated Job type if migration does not terminate
128 normally. This fixes bug #719.
129 kes Update ReleaseNotes
130 kes Purge Job records from the catalog for Migration. This was
131 not properly done previously. This fixes bug #718.
133 kes Initialize msg_type to M_INFO in migration. Pointed out by
135 kes Add some fflush() statements for debug output. This should not
136 really be necessary and defeats buffering but users continue
139 kes More copyright changes.
140 kes Make sure we don't detach from the despool read device since it
141 is a temporary structure where the condition variables are not
142 initialized. Bug #711.
144 kes Add Bacula version+date to Client record. This is a very minor
145 security problem in that passing the version facilitates a hacker's
146 life, but it will make support easier.
147 kes Implement fixes to make disk seeking work. Currently turned
148 off in version.h pending reserch on what problems it will cause
149 because of the previous bsnprinf() sign extension bug.
151 kes Add Landon's refactor of restore Feature request to the
153 kes Tweak debug levels and messages for examining the disk
156 kes Cleanup some of the error termination code in migration.
157 kes Separate read/write source strings to keep track of where
158 storage devices are used in a job.
159 kes Implement a new method of keeping track of which storage
160 device is used in a Job. USTORE keeps both a pointer to the
161 resource and to the source string.
162 kes Modify all code to use new storage set subroutines in job.c
163 kes Modify migrate.c so that the definitive selection of the storage
164 resource is done in the do_migration_init() routine prior to
165 the job going into the job queue. This permits accurate
166 deadlock detection (same read and write storage resource).
167 kes Remove bfill from btape (I think it was a left over stub).
169 kes Make sure that the storage for a job is pulled first from
170 the Pool and if not from the Job.
171 kes Ensure that either the Pool or the Job specifies a Storage
174 kes Start applying new FSFE copyright.
176 kes Add additional error messages in acquiring a drive for read.
177 kes Make WritePartAfterJob the default so that the last DVD part
178 always gets written to the DVD by default.
179 kes Add additional error messages in migration.
180 kes Suppress redundant error messages in migration (possibly more to do).
181 kes Apply Martin's fix (updated to 1.39) that takes into account
182 run storage overrides in the Director status display.
183 kes Implement, but turn off the submitted code that sets the EOT
184 model on FreeBSD machines. Turning on this code is too risky at
185 this point in the development.
187 kes Implement unique dbid routine for migration to prevent the same
188 JobId from being migrated twice. This should fix bug #709.
190 kes Apply Jaime Ventura's 'mail on success' patch.
191 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
192 if memory usage gets too big.
193 kes Tweak migration to ensure that read/write devices are different.
195 kes Create an AUTHORS file to list Bacula contributors.
196 kes Add Richard Stallman's four GPL freedoms to LICENSE
197 kes Require the conf file to have a valid NextPool for writing the
200 ebl Enable RecycleCount in catalog.
201 ebl Fix "echo python | bconsole" segfault
203 kes Implement code to pass the MediaId to the SD. The SD then uses
204 this MediaId when creating JobMedia records. This fixes a bug
205 with Migration where the MediaId got set to the second Volume
206 read rather than the write Volume. Possibly (unlikely) fixes
208 kes Remove NextPool from Job resource.
209 kes Edit a few numbers in the restore dialog with commas.
210 kes Note, the DIR<->SD protocol has changed.
212 kes Replace () by {} in configure.in for proper HP configuration.
213 kes Shorten some lines over 80 characters in filed/backup.c
214 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
216 Version 1.39.28 released:
218 kes Change error message 'illegal' to 'invalid' -- bug #707
219 kes Add rather primitive device resource deadlock detection in
220 the job queue handler. It detects the same read and write device
221 for migration and cancels the job.
222 kes Start adding a unique_dbid_hander() routine in migration to avoid
223 duplicate mediaids and duplicate jobids.
224 kes Add patch from bug #708 to permit relative paths such as ../xxx
225 in the restore tree routine.
226 kes Add Eric Bollengier's patch to reduce locking time in the SD after
227 despooling, and thus many jobs finish faster.
228 kes Correct locking order of reservations lock and device mutex in
229 reserve.c -- this should correct Arno's deadlock that occurred
230 when doing mount/unmount at the same time a job is reserving a
233 rbn Fixed problems with encryption when combined with compression
234 or sparse files. Unfortunately this means that all previous
235 encrypted backups can't be restored.
236 rbn Fixed problem in bfgets with Windows and Mac end of lines.
237 rbn Fixed bug in Windows version of close_bpipe() that cause programs
238 like bsmtp() to hang waiting for the pipe to be closed. Fixed
239 binary file type problems in open_bpipe().
240 rbn Fixed a number of bugs in the mysql DB scripts.
242 ebl Fix broken runscript on director. (RunBefore, RunAfter)
243 ebl Use M_ERROR instead of M_FATAL in runscript.c
245 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
246 rbn Ignore UTF-8 marker at the start of .conf files.
247 rbn Add stab2cv to 3rd party dependencies. This is a utility I
248 wrote that is licensed under the GPL and available on SourceForge.
249 It converts the stab debugging info generated by gcc into Codeview
250 format. Currently it just translates function names to global
251 symbols. This is sufficient to get reasonable stack traces from
252 Dr Watson and to look at minidumps.
253 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
254 rbn Enable Windows XP look and feel for the tray icons and wx-console.
255 rbn Add Windows specific FileSet example to bacula-dir.conf.
256 rbn Reorganize Start menu so that documentation and configuration are
259 rbn Change daemons and utilities so that if -c is omitted from the
260 command line AND there is no configuration file in the current
261 directory then the 'standard' configuration file (eg
262 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
263 doesn't contain any path separators AND there is no configuration
264 file by that name in the current directory then the 'standard'
265 configuration file directory will be searched for a file by that
267 rbn Fixed restore on Windows so that backslashes as path separators works.
268 rbn Add missing query.sql file to Windows installer.
269 rbn Fixed Windows versions of catalog backup scripts.
271 kes Fix optional files in Makefile.in of src/filed that caused
272 a syntax error when using no optional files.
274 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
275 messages; there is no reason to attempt to load a private key.
276 from master key files.
278 Version 1.39.26 released:
280 kes Apply the three patches from Richard Mortimer.
281 bacula-reposition.patch, bacula-tape-reopen.patch, and
282 bacula-eod.patch. This corrects tape positioning on older devices,
283 and also a problem with btape.
284 kes Apply fix from bug report #696 where writing to a FIFO does not
285 work due to a dumb typo.
286 kes Unlock the tape door before the file descriptor is released. This
287 should fix lots of somewhat subtle failures when using an autochanger.
289 kes Correct mtx-changer bug that I introduced in a recent commit, and
290 pointed out by Robert Nelson -- thanks.
291 rbn Fix Windows' daemons so that messages print to stdout if not
292 running as a service.
293 rbn Add daemon name to trace file name (eg bacula-dir.trace).
294 rbn Fix environment variable expansion in directory names on Windows.
295 rbn Fix autochanger support in fill command.
296 rbn Update SQL scripts to match Unix versions.
297 rbn Fix daemon usage displays.
298 rbn Cleanup bacula-dir.conf template.
299 rbn Install openssl.cnf so that the openssl.exe installed in the
300 Bacula\bin directory can be used to generate keys and
301 certificates for TLS and encryption.
302 rbn Fix cleanup of spool files on Windows.
303 rbn Remove /silent option from daemons on Windows. The new default
304 is the same as the old /silent. To enable the message boxes that
305 previously were suppressed by /silent you must add /debug instead.
306 NOTE: As a result of this change, the first time you upgrade from
307 a previous version of 1.39.x you will receive the message
308 boxes when the remove of the old services succeeds. This
309 is the same behaviour as when migrating from a version prior
311 However, going forward, these message boxes will not appear on
312 upgrades or new installs.
313 rbn Add new /debug option. This option enables the message boxes that
314 previously were suppressed by the /silent option. In addition the
315 daemons running as services will open a console window if this
317 rbn Fix bug with service not being removed on migrated installs. This
318 should correct those cases where the file daemon install was failing
319 when upgrading from versions prior to 1.39.x.
321 kes Turn on heap reporting in Dir with zero debug level.
322 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
323 send the same message to stdout.
325 kes Begin work on new GUI 'console'.
326 kes Make configure look in non-standard MySQL library directory
328 kes Make mtx-changer automatically configure the autochanger wait
329 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
331 kes Correct drop_sqlite_tables.in script to not delete the database.
332 kes When writing to a log file, close and reopen the file descriptor
333 if there is an error writing the file.
334 kes Modify the autochanger loaded?, load, and unload commands to print
335 the full text of any mtx output if there is an error. Helps to
336 ease diagnosis of autochanger problems.
337 kes Correct a few Win32 errno returns in the VSS code so that hopefully
338 a resonable Win32 error message will be printed.
339 kes Convert a few strcat()... to bstrncat() in the Win32 code.
341 rbn Added Windows version of bsmtp.
342 rbn Fixed path search for Windows so that Bacula\bin is automatically
343 searched for programs and scripts.
344 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
347 Version 1.39.24 released:
349 kes Apply dvd find volume patch from Richard Mortimer.
350 kes Eliminate the dvd specific mount routines using only the
352 kes Make update_free_space a method of DEVICE and rename
355 kes Require a messages command acl to be able to receive messages
357 kes Add console, system, and scan job types in util.c.
359 kes Print the Volume purged message only for real jobs to keep
360 from cluttering up the daemon messages.
361 kes Lock the tape drive door while Bacula is using the device.
362 kes Add back the 'No Jobs running' message to FD and SD status because
363 my regression script depends on it, and I'm too lazy to change the
365 kes Start using structure assignments (not too happy about it ...).
366 kes Fix a bug in the tools Makefile that broke on Solaris.
367 kes Unload any autochanger drive during a 'release' command.
369 kes Enhance error message when restoring without bootstrap file.
370 kes Check restored size only for regular files.
371 kes Store Python job level in job record in Dir.
372 kes Add back code to open tape device nonblocking, but if rewind fails
373 release file descriptor.
374 kes Modify acquire.c to first try autoloading the device. Also, ask operator
375 to mount tape if drive cannot be opened.
376 rbn Made Windows service tray status windows resizable.
377 rbn Fixed horizontal scrolling of text in status window.
378 rbn Preserve horizontal and vertical scroll position while
379 updating. This prevents the display being reset to the
380 top line every 5 seconds.
381 rbn Fix Windows cross-compile compatibilty problems with
382 *nix variants such as OS X without the zic command.
383 rbn Eliminate dependency on man2html.
385 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
387 kes Fix a compiler warning in compat.cpp
388 kes Change strcpy to bstrncpy in compat.cpp
389 kes Remove some broken code in bdb_list.c
390 kes Fix, hopefully the last, ACL problem in the restore command.
391 kes Update the README.mingw32
392 kes Add new version of upgrade-win32-client.txt to examples directory.
393 Submitted by Michel Meyers.
394 kes Print an INFO message in the job report when a Volume is marked Purged.
395 rbn Fixed handling of external program and script execution
396 so that the format of the command line is more flexible.
397 Now executable path names containing spaces are translated
398 to the equivalent short name automatically. The result is
399 passed to cmd.exe with the quotes removed.
401 kes Apply the recycle patch from Richard Mortimer.
402 kes Convert a few if statements in dev.c to switch statements.
403 kes Start using print_errmsg instead of bstrerror().
404 kes Print a job message in SD when a job is marked to be canceled.
406 kes All code added back. Fixed block.c read/write to loop only 3
407 times. This apparently keeps the OS from crashing (at least
409 kes The kernel bug still persists. Backup something then immediately
410 do a bscan on the same tape, and the kernel will crash.
411 kes Simplifed tape open(). It no longer uses nonblocking mode, which
412 means that opening with no tape loaded will probably take at least
413 6 minutes before an error is reported.
414 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
415 when doing set_os_device_parameters.
416 kes Report open error in mount.c
417 kes Remove all .exe files from the installer directory on make clean.
419 kes Start adding back removed code.
420 kes Back out a number of changes because backups to tape crash my
422 kes Remove the inetd code from the File daemon.
424 kes Add -c option to pg_dump so that it initializes tables when
426 kes Fix FirstWritten time on Volume to be obtained from SD so that
427 it is the actual time the volume was first written.
428 kes Minor Makefile changes.
429 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
430 ebl Add yes keyword to prune/purge command
432 kes Correct a test in block.c that prevented restore of a DVD from
433 looking at the last part in the spool directory.
434 kes Make some error messages clearer mostly by using the word DVD
435 in the message. Improve infor message in read_record for DVDs.
436 kes Remove DVD kludges in dircmd.c label/relabel.
437 kes Move the dvd relabel code from dircmd.c into
438 write_new_volume_label_to_dvd() adding a relabel argument.
439 kes Rewrite the truncate_dvd() code to be much simpler and
440 more logical. First blow away any spool part, then create a
441 new empty part and write to the DVD.
442 kes Rewrite the can_write_on_non_blank_dvd() code making it
443 only ensure that no valid data is on the DVD -- i.e. it
446 kes Minor Makefile fixes.
447 kes Put attach_dcr_to_dev in a subroutine.
448 kes Make attaching/detaching to/from a device use a flag and
449 only detach if actually attached.
450 kes Add dvd-simulator.in to scripts directory and add to configure.
451 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
452 This could be a cause of a number of drive reservation problems.
453 Note, this code is now in attach_dcr_to_dev().
454 kes Suppress doing Volume updates if it is a system job. This should
455 prevent the DVD label blocking.
456 kes Clear the freespace ok flag in a couple of strategic places.
458 kes Put removing zero sized spool part file in subroutine and
459 call from release_device().
460 kes Add Richard's patch for relabel to dircmd.c, but save and restore
462 kes Rework a lot of subroutines in dev.c to take dcr as an
463 argument. This is done to eliminate the usage of attached_dcrs
465 kes Change truncated_dvd to blank_dvd, which seems more suitable.
466 kes Apply most of Richard Mortimer's truncate patch.
467 kes Create lseek() method for DEVICE that takes dcr as an
468 argument. This is to eliminate the use of attached_dcrs in
469 lseek(). The calls to lseek_dev() must still be changed.
471 kes Apply Richard Mortimer's patches for printing an error
472 message in btape when a DVD is used, and to initialize traceback.
473 kes Added error message to btape when trying to access a file.
474 kes Move prototype of update_slots() to protos.h.
476 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
477 and FDJobStatus to the Director Python variables.
478 kes Make sure valid argument passed to str_to_utime() where Arno
480 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
481 I.e. part of two different patches.
483 kes Modify disk changer to simulate some of the error conditions
485 kes Make sure the close() call in the SD tools is just before the
487 kes Implement dir_get_volume_info() in bls using the patch from
488 Richard Mortimer but call find_num_dvd_parts().
489 kes Implement find_num_dvd_parts() that mounts and scans a DVD
490 and counts the parts.
491 kes Move the omode code in open_dvd() up so that the cannot
492 write on blank disk can check can be bypassed for read mode.
495 kes Disable normal data spooling for DVD writing which uses
496 a different spooling mechanism.
497 kes Apply patch from Richard Mortimer to ensure that the number
498 of DVD parts is correctly updated.
499 rbn Save installer details log in the Bacula directory as
501 rbn Add installer generation of client and storage templates
502 suitable for @inclusion on the director.
503 rbn Mark previously installed Win32 components read-only since
504 deselection doesn't do anything.
506 Version 1.39.22 beta released:
508 kes Fix logic error in handling error return from mtx-changer
510 kes Make status from SD aware of -1 (unknown) Slot status.
511 kes At Eric's suggestion make both the 'slots' and 'drive' commands
512 to the Storage daemon work even if the drive is busy.
513 kes Make two separate Win32 menu links for starting bconsole and
514 wx-console in winbacula.nsi
515 kes Apply DVD part_spooled patch from Richard Mortimer
516 richm@oldelvet.org.uk
517 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
518 rbn Fixed problems migrating settings from previous releases in
519 Win32 installer. Add Readme.txt with an option to show it on
520 the installer Finish page.
522 kes Use get_catalog_resource() to open catalog database
523 to ensure that ACLs are respected and that user is
524 correctly prompted for database.
525 kes Integrate multiple console/director patch from
526 Carsten Paeth calle@calle.in-berlin.de
527 ebl Add character substitution in Job/JobDefs WriteBootStrap.
528 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
529 kes Apply patch supplied in bug #656 to pass priority field
530 in the run dialog to the Director in gnome console
531 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
532 this will fix bug #627 where Bacula eventually gets
533 confused about what Volume it wants.
534 kes Add a new close_part() class in the SD to save the device
535 state around open/close_part/open for DVD writing. This
536 should fix the num_dvd_parts getting zeroed as reported by
538 kes Apply patch from Richard Mortimer that correct edit code
539 for debug output of st_size.
540 ebl Add support of encrypted data stream to bscan.
541 display data_len instead of data content (may be binary)
543 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
544 bcopy. Fixes bug #669 reported by Eric.
545 kes Fix incorrect number of arguments in SQL statement in
546 sql_get.c as reported by Eric.
548 kes Update examples directory.
549 kes Remove unused variable in winservice.cpp
550 kes Make Win32 make command build installer.
551 rbn Add new Install Type page, used to select between Automatic
552 and Custom installs. Automatic installs only prompt for
553 configuration items that can't be reasonably defaulted.
554 rbn Added Bacula logo to page headers.
555 rbn Added Upgrade support
556 - Configuration and component selection are migrated from
558 - Configuration of upgraded components is preserved and
560 - Configuration of new components is handled according to
561 the Automatic / Custom selection.
562 - Component selection is defaulted to previously selected
564 rbn Installation of Server components is disabled on
565 Windows 95, 98 and ME.
566 rbn Added URLs for support, info and upgrades to Bacula entry
567 in Add/Remove Programs.
568 rbn Added Version info to Bacula entry in Add/Remove Programs.
570 kes Correct dvd code that breaks tape labeling.
571 kes Implement Enabled on update slots.
573 kes When doing a label, pass the VolBytes back to the Director,
574 which puts it in the catalog.
575 kes Print an error message if the user attempts to prune an
577 kes Need to start using %ld when sscanfing 32 bit values.
579 kes Correct the counting of VolCatBytes for DVDs.
580 kes Add code to mount.c to require that VolCatBytes corresponds to
581 what is actually found when doing an append.
582 kes Update freespace only after writing on the DVD.
583 kes Remove code that blows away the current part in the spool file.
585 kes Apply new dvd-handler patch from Richard Mortimer.
586 kes Tweak so that debug level 20 shows only DVD commands.
587 kes Correct spooled_part flag in dev.c close() so that it is cleared
588 when the spool file is deleted or does not exist.
589 kes Print part number in read_records when eof hit (restore).
590 rbn Installer default changed to start services on new install.
592 kes Make find with no args in tree restore return error rather than
593 stopping the selection. Fixes bug #665
594 kes Rework DVD writing to ensure that the last part is written
595 on open_next_part when dealing with a spool file.
596 kes Correct the lseek_dev() routine to handle end point correctly
597 (bug introduced by me).
598 kes Allow part number to exceed num_dvd_parts in lseek_dev().
599 rbn Change make_session_key on Windows to use WIN32 APIs to produce
601 rbn Add new tool scsilist.exe which displays the changer, tape and
602 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
603 to add them to bacula-sd.conf.
605 kes Apply dvd-handler patch from Richard Mortimer.
606 kes Apply dvd error check patch from Richard Mortimer.
607 kes Apply bpipe race patch from Richard Mortimer.
608 kes Rework how DVD labels are handled and set append only
609 when part > num_dvd_parts.
611 kes Rework many features of DVD writing and reading. Added many error
612 messages. Most importantly changed part to represent the current
613 part number base zero. This makes current DVD writing incompatible
614 with previous version.
616 kes Add host:port to connect failure messages to FD and SD from Dir.
617 kes Add WhereACL to console ACL list. If nothing is specified, only
618 the default is permitted for restore. Otherwise, *all* allows any
619 path, or you can specify permitted paths. This should allow control
620 over where users can restore files. This is untested.
621 kes Modified message to add a ? (as in loaded?) when querying the autochanger
622 for what Slot is loaded.
623 kes Fixed the use of Slot, so that is more correctly maintained, thus
624 eliminating unneeded duplicate calls to determine what Slot is loaded.
626 kes Install man pages with 'make install'
627 kes wx-console crashes because of differences between Bacula and wxWidgets
628 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
630 kes correct improper indenting in wx-console/console_conf.c
631 kes update wx-console header copyrights
632 kes Fix bug #658 where wx-console mangles file/directory names containing
635 kes Add Media.Enabled flag to client backups for dotcmds.c
636 kes Enforce Media.Enabled=1 for a current restore to work.
637 kes Require restore case 3 to have sqlquery permission to work.
638 kes Remove obsolete del_MAC sql command.
639 kes Ensure that bscan creates Volumes with Enabled=1.
641 Version 1.39.20 beta released:
643 kes Correct missing Client table reference in SQL pointed out by
646 kes Fix Win32 build (new entrypoint, start baculafd).
648 kes Add -n option to bconsole to turn off conio.
649 kes Print JobIds to be migrated in Job Report.
650 kes Add additional user supplied notes to the messages part of
651 bacula-dir.conf concerning multiple email addresses.
652 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
653 kes Add more recent Feature requests to Projects file.
655 kes Apply Maritn's fix to src/win32/Makefile.
656 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
657 kes Implement pruning for Migration and migrated jobs.
658 kes Implement PoolOccupancy migration.
659 kes Implement PoolTime migration.
661 kes If doing a mount, look for a slot, and if specified pass it to
662 the SD so that it can load the autochanger.
663 kes Return DVD=1 flag if a label command is done to a DVD. This
664 permits setting VolParts to 1.
665 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
666 rework ua_label code based on DVD media type to use DVD flag returned.
668 kes Eliminate some compile warnings in dird_conf.c
669 kes Format the bytes field in the terminated jobs part of the status
670 command for the three daemons with suffixes to reduce print size
671 of backup bytes. Suggested by a user.
672 kes When not descending into a directory, print the File= name that
673 triggered it -- makes why not descending a bit clearer.
674 kes Do not unload autochanger when doing a list command -- basic code
675 from Eric Bollengier.
677 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
678 to build-depkgs-mingw32. It now handles two options -h to display
679 help and -C to reextract the source and apply the patches. The -C
680 option is useful for updating the source after new patches are
682 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
683 This allows updating to new versions without having to modify the
684 script and makes it easier to figure out which packages and which
686 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
687 as build-depkgs-mingw32 except they are built using Microsoft Visual C
688 and placed in the depkgs-msvc directory. There is also an
689 External-msvc file to describe the packages.
691 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
693 kes Fix bug #462 incorrect error message printed when client script called
694 from File= was not found.
695 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
696 do a rewind on Solaris when no tape is in the drive (Solaris does not
697 have the detailed errno found on Linux). Added Solaris specific code.
698 Note, this may apply to other OSes as well.
700 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
701 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
702 fix bug 648 - update sqlite script patches, lock out gnome2console
703 builds for platforms with gtk+ < 2.4.
704 Updated build_rpm.sh - add remote source directory, add switch for
705 signing, refine file names.
706 Updated spec file again for Mandriva build as they have this curious
707 custom of silently converting all manpages to bzip2 format just before
708 the final packaging step.
710 rbn Fixed the Windows Makefiles so that they won't accidentally try and
711 pickup binaries for the Unix build. This allows both the Unix
712 build and the Windows build to be built in the same tree without
713 interfering with each other.
714 rbn Fixed error handling and cleaned up mtx-changer.cmd.
715 rbn Added the rest of the database scripts. These are installed but are
716 not yet edited for variable replacement.
717 rbn Broke out the cats functionality from bacula.dll and put into new
718 separate dlls for each database type. At installation time the
719 correct one is copied to bacula_cats.dll.
720 rbn Eliminate the need to install the mysql.dll on client only builds.
721 rbn Moved dird/sql_cmds.c into the cats directory so all the database
722 specific #ifdefs were in the cats directory.
723 rbn Added a new sql_cmds.h with all the declarations for the variables
724 exported from sql_cmds.c.
725 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
726 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
728 kes Correct improperly formatted list command output reported by Dan.
730 kes Correct despool time calculation.
732 kes Remove previous changes to compat.cpp as they create problems.
733 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
734 kes Attempt to fix problems with the msg_queue crashing on Solaris
735 when Bacula is terminating, but problems remain.
736 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
737 name editing problems with too many \\?\es.
738 kes Fix some Bacula source code style problems in compat.cpp.
739 kes Add debug code to compat.cpp and convert non-Bacula debug code
742 kes Change the name of the technical notes file from kes-1.39 to
743 technotes-1.39. Prefix my messages with 'kes '.
744 kes Allow dequeue_messages() to be called twice. Should fix bug
746 kes Add Job type to bscan Job information output.
748 kes Update copyright date in program files, and for the most part
750 kes Implement %q in bsnprintf.c apparently I forgot it.
752 kes Make disk-changer sed command compatible with FreeBSD.
753 kes Make a first cut at a ReleaseNotes and ChangeLog for a
755 kes Make make clean descend into the src/win32 directory.
756 kes Fix some #ifdefing so that Solaris and FreeBSD compile
757 sys/stat.h was turned off.
758 kes Use suffix editing for new transfer rate messages.
759 kes Attempt to come up with a workaround which seems to be an OS
760 bug where write() returns EBUSY. IMO this should not happen.
761 It triggered in truncatebug test. The workaround retries using
763 kes Eliminate a strerror() call in a class method that failed with
765 kes Use rm -rf rather than rmdir to delete the src/win32/release
766 directory during make clean.
768 kes Make bscan ignore ACL streams.
769 kes Update projects files with new Feature Requests.
770 kes Generate current English and French manuals and upload
772 kes Update the home page to include the new British/French flags to
773 switch between translations. Work done by Alexandre Baron.
774 kes Make disk-changer script print an error message if the changer
775 directory is not defined.
776 kes Create a generic DB routine for getting an int (32/64 bit) from
778 kes Add more migration code.
779 kes Add a few more files to .cvsignore here and there.
780 kes Minor fixes for SD write rate and despooling rate.
781 kes Turn off new test code in src/console.c
785 kes Incremented the version number to signify that all of Robert's code
786 for Win32 that was in the branch is now integrated into the HEAD,
787 and that Eric has submitted code that we hope will provide limited
788 backward compatibility with 1.38 file daemons (more testing to be
790 kes I rationalized a few of the names of the variables (mainly jcr names)
791 that are used during migration as keeping three different jcrs at the
792 same time clear in ones head is not easy.
796 eb Tweak new runscript feature to work with 1.38.x FDs.
797 eb Correct crypto.c to fix segfault when restoring an encrypted stream
798 on fd which don't use rsa keys.
799 eb Add yes/no English keywords on localized yes/no questions.
801 kes Several important commits from Robert Nelson for code cleanup and
803 kes Modify console.c so that when conio is enabled, it converts \n to
804 \n\r before outputting to the console. Hopefully this will fix
805 the problems with expect in Perl that Eric saw.
807 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
809 kes Add Comment field to llist of a volume.
810 kes Allow true/false in some yes/no questions.
811 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
812 kes Remove a few /n's when scanning commands from another daemon. This
813 permits adding additional fields later.
814 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
815 kes Update README.mingw
817 kes Tweak authentication to work with 1.38.x FDs.
818 kes Tweak catalog make scripts.
819 kes Fix catalog upgrade scripts so that they work.
820 kes Correct despooling debug code to eliminate race condition.
822 kes Add additional fields as specified by Arno to LocationLog.
823 kes Add comment field to the Media record.
824 kes Add Time field to the Log record.
825 kes Correct migration SQL (thanks to Bill Moran) so that it
826 runs with PostgreSQL also.
827 kes Add spooling/despooling info in status output of SD.
829 kes Spend a lot of time integrating mkcdrec with the rescue disk.
830 kes Add VOLMGMT message class for volume management messages (none yet).
831 kes Add CATALOG as a destination. It goes into the LOG table.
832 kes Implement the Log table in the DB.
833 kes Implement the Location Log table in the DB (for user use).
834 kes At Eric's request add a run_scripts() just after blast_data in
837 kes Add Enabled column to Location, correct some typos in DB schemas.
838 kes Correct bug I introduced into RunScripts enum.
839 kes Add log table to Catalog
840 kes Purge original job migrated if the migration terminates normally.
841 kes Cleanup purging of files/jobs so that it is done only in a
843 kes Add new VOLMGMT message class.
844 kes Add Catalog message destination (user conf code remains to be written).
846 kes Modify read_record and friends to properly deal with migration
848 kes Update debug code in read_record.
850 ======================= Warning ==========================
851 Separate read and write storage in Jobs in the Director. This
852 is a major rewrite of some of the low level code and hence has
853 a high probability of introducing bugs.
854 ==========================================================
856 kes Move the job init code up to *before* the job is put into
857 the job queue (resource allocation queue). This permits the
858 job to establish whether it will read or write or do both.
859 kes Add name() methods to all the resource classes.
860 kes Implement separate read and write storage resource
861 allocation/deallocation in jobq.c
863 ======================= Warning ==========================
864 Implemented new method of getting the default Storage from the Media
865 record rather than from the MediaType for restore. As a fall
866 back, if no Storage is defined, use the MediaType. This
867 eliminates most all prompts if there are multiple MediaTypes
868 used. This is an important and fundamental change.
869 ==========================================================
871 kes Add more detail (Storage, Device) to list of volumes printed
873 kes More code in migrate. In particular start multiple jobs if
875 kes Probably overkill, but ensure that the bsr is unique even within a
877 kes Rework bsys.c drop() so that it now should work as expected.
878 kes Update a bunch of old copyrights -kes particularly in .h files.
879 kes Remove src/lib/bshm.c/h
883 ======================= Warning ==========================
884 All hash codes in the database are now kept in world
885 compatible base64 format (no = filling). This means that
886 all FileSets will be updated and if you are running
887 verify jobs, you must do an InitCatalog.
888 Authentication uses the new algorithm, but should be
889 backward compatible with 1.38.x
890 ===========================================================
892 kes Modify the authentication routines so that the 1.39.15 Director
893 always runs with the compatible binary to base64 code (same as
894 the rest of the world). It will however detect if an SD or
895 FD is running the old code and if that is the case, will use
896 the old algorithm for authentication. However, all consoles must
897 use the compatible algorithm, and all data entered into the database
898 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
899 use the compatible algorithm.
900 kes Rename the cram_md5 routine names to be slightly more appropriate
901 to what they are doing (challenge and respond).
902 kes Robert committed his #ifdef and header cleanup.
904 kes Fix a compiler warning in files/backup.c
905 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
907 kes Robert committed his low impact changes.
908 kes I removed a size_t from the jcr.h definition.
909 kes Update the tape regression scripts (still to be tested).
910 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
911 kes Require done or quit to exit from in memory tree restore.
913 kes Write install/uninstall of new manpages. There are now a
914 pile of man pages. Some of which need a lot of work.
916 ======================= Warning ==========================
917 The --mandir ./configure option now points to the top level
918 man directory. The man files will be installed under
919 mandir/man8 and mandir/man1 as appropriate.
920 ==========================================================
922 kes Add complete text of GPL to LICENSE.
923 kes Implement job report that indicates where Storage and Pool
924 came from -kes with overrides and Pool storage and NextPool,
925 it is all very complicated.
926 kes Create a few common subroutines for backup.c and migrate.c
927 kes Eliminate warning messages from tray-monitor.c
929 kes Apply fix for scheduler for missing unlock_jobs().
930 kes Clean out autoconf caches before rebuilding configure
931 kes Fix the FreeBSD pthreads lib define updated by Dan.
932 kes Add missing semicolon in src/console/console.c
933 kes Add Robert's enhanced version of build-win32-cross-tools
934 as well as his patch file.
935 kes Note, the new gcc options are likely to break building of
936 wx-console or the tray-monitor ...
938 kes Implement Robert's suggestion to suppress printing compile lines.
939 kes Detect GCC correctly (I hope)
940 kes If using GCC (actually g++) add the following compiler flags
941 -fno-strict-aliasing -fno-exceptions -fno-rtti
943 ===================== Warning =============================
944 Turn on new bsnprintf() code. This could cause print output
946 ===========================================================
948 kes Fix crypto when not using openssl. I previously overlooked this.
949 kes Eliminate crypto type punning problems by eliminating void * and
950 using uint8_t * instead.
951 kes Harden authentication failure in FD by single threading errors
952 and forcing a 6 second wait.
954 ===================== Warning =============================
955 Removed 'Accept Any Volume' directive.
956 ===========================================================
958 kes Major cleanup and simplification of regress using shell functions
959 (more tests to be converted to new format)
960 kes Add detection of 64 bit Irix as indicated by user.
961 kes Increment catalog database id from 9 to 10.
962 kes Add a few of the new database fields to the various C++
964 kes Implement code to fill in the most important new fields (e.g.
966 kes Ensure that most of the new fields are in create/get/insert/update.
967 More work to be done.
969 kes Update some very old licenses in src/cats.
970 kes Modify the database format for handling Migration jobs:
971 Add PriorJobId, RealEndTime to Job table
973 Remove Stripe from JobMedia record (not used, wasting space)
974 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
975 Add Cost to Location table.
976 kes Delete mac_record subroutines.
977 kes Add new table values to create/update/get routines as appropriate.
978 kes Update the update_tables and make_tables scripts.
979 kes Make a first cut in using a union where multiple pointers (actually
980 pointers to pointers) are stored.
981 kes Make some changes to base64.c suggested by Robert and others and add
982 a small amount of documentation.
983 kes Add some changes suggested by Peter for Solaris (bregex...)
984 kes Make runscript.h always built because it needs to be pulled into
985 more places. In particular its RES was left out of a union.
986 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
987 This makes it slightly easier to detect uninitialized variables.
989 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
990 sometimes creates install problems.
991 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
992 Nelson's code. More to do.
993 kes Convert a few store_bit to store_bool in filed_conf.c.
994 kes DVD tweak to block.c as supplied by Uwe Muessel.
996 kes Modify configure.in to check for typeof().
997 kes In findlib/attribs.c use typeof instead of templates if possible.
999 kes Implement partial error messages for src/filed/acl.c
1000 kes Fix return code to fail when doing update barcodes and
1001 Pool resource is not found. This previously caused Volumes
1002 to be labeled as cleaning tapes.
1003 kes Small updates to projects.
1005 kes Add Eric Bollengier patch for new RunScript directive. It breaks
1006 compatibility between dird and fd.
1008 kes Prevent DVD code from rewriting label if the device cannot be
1010 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1011 fix Debian build bug.
1012 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1013 kes Integrate manpages contributed by Jose Luis.
1014 kes Update projects file.
1015 kes Add manpages Makefile.in to configure.in
1016 kes Remove installation of bacula.8 in scripts directory.
1018 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1020 O_NOATIME is a open() flag which makes it possible to read a file without
1021 updating the inode atime (and also without the inode ctime update which
1022 happens if you try to set the atime back to its previous value). It also
1023 prevents a race condition when two programs are reading the same file, but
1024 only one does not want to change the atime. It's most useful for backup
1025 programs and file integrity checkers (and bacula can fit on both
1028 Recent versions of the Linux kernel and glibc have support for it (the
1029 glibc support being mostly copying the O_NOATIME definition to
1030 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1031 it does nothing (since the kernel ignores unknown flags).
1033 If the kernel has support for it, trying to use it either works, fails
1034 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1035 are not either the owner of the file or root). A simple way to prevent the
1036 failure is to open the file without the flag and set it later with
1037 fcntl(F_SETFL), ignoring any EPERM errors.
1038 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1039 of restarted jobs to complete (due to a destroyed pthreads conditional
1040 variable used by the message thread).
1041 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1043 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1044 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1045 colons in query.sql file.
1046 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1047 not to create orphans.
1048 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1049 in restore long listing.
1050 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1051 of incorrect MarkedId.
1052 kes Apply patch from adioso bug #616 to correct text in manual (replace
1053 Director with File daemon).
1054 kes Rework a few of the zlib changes so that they build properly.
1057 kes Move DIR 'run' command to SD before starting the message thread
1058 as suggested by Cristopher Hull to avoid a race deadlock from
1059 two threads using the bsock structure.
1060 kes Modify LICENSE to correct some problems pointed out by Debian.
1062 kes Correct EOF with no \n lex.c problem.
1063 kes Tweak compat.h compat.cpp and merge with apcupsd
1064 kes Add additional INFO messages if autochanger cannot be used.
1067 kes Simplify Win32 Makefile
1068 kes Correct count of buffers/bytes used by smartall.c
1069 kes Updated compat.h after porting apcupsd to MinGW.
1071 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1072 started adding Makefile ...
1073 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1075 kes Reloading a bad configuration file doesn't kill director any more.
1076 Thanks to fix from Eric Bollengier.
1078 kes Fix problem of accents with new Win32 code.
1079 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1080 works in the MinGW build with the exception that there
1081 is a problem with accented characters -kes i.e. there is
1082 some mapping problem with wide characters.
1083 kes The code no longer compiles with Microsoft VC++.
1085 kes Start implementing Christopher's St.Bernard code.
1086 kes Add Christopher's mods for opening files.
1087 kes Strip \r \n from Win32 error messages (Christopher)
1088 kes Add more info about Win32 system if unknown (Christopher)
1089 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1090 kes Fix a number of incorrect strings marked for translation, when
1091 they should not be (e.g. commands).
1092 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1093 Patches supplied by user in bugs #608 and #599.
1094 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1095 listing. This fixes some problems with Win32 printing incorrect
1097 kes Correct the clock shift comm time calculation between the DIR
1098 and the FD. It was added rather than subtracted.
1099 kes Strip all backslashes in filenames to be restored on Win32
1100 machines -kes the names should all be in Unix format, and if
1101 there are any backslashes it is most likely due to an improper
1102 FileSet definition, and the files will not otherwise be
1104 kes Remove lib/regex.c (replaced by bregex.c).
1105 kes Delete src/win32/License.txt
1106 kes Modify installer to install LICENSE
1108 kes Fix bug in build-win32-cross-tools script reported by Howard
1109 kes Implement cross compiled bconsole
1111 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1112 kes Write first cut of README.mingw32
1113 kes Add back ua_label barcode fix from Rufolf Cejka.
1114 kes Integrate the majority of the Mingw cross-tools submission
1115 made by Howard Thomson. Everything compiles, with zlib, openssl,
1116 and VSS turned off. Linking needs a pthreads library ...
1118 kes Add 'Dir Status' button to the gnome console.
1119 kes More work on migration.
1120 kes Restore non-compatible base64 coding to permit compatibility.
1121 kes Display heap stats in Storage daemon without debug level.
1123 kes Integrate most of the MinGW changes -kes more to do.
1125 kes Implement using pg_config for finding PostgreSQL files.
1126 Fixes bug #600. Patch supplied by user.
1127 kes Remove -t option from mktemp in mtx_changer.in and use
1128 working directory. Fixes bug #578.
1129 kes Update job start time after the any run before job so that
1130 files created by the script are only backed up once. Fixes
1132 kes Strip trailing newline only from filenames entered in
1133 the restore command when reading a file. This permits
1134 the user to enter filenames with trailing spaces. Fixes
1135 bug #549. The user supplied a patch that I modified slightly.
1136 kes Use the most recent time (st_mtime, st_ctime) in the dir
1137 command in restore. This gives the user a better idea of what
1138 the newest file really is. This fixes bug #574. The fix
1139 was suggested by the user.
1140 kes Implement a compatible version of base64. This permits external
1141 programs to duplicate Bacula's base64 algorithm using standard
1142 routines. This fixes bugs #296, and 565. Patch submitted by
1144 ================= Note ========================
1145 Previous Signatures stored in the database are no longer
1146 compatible with this. The main downside is for Verify jobs,
1147 and doing an InitCatalog run will fix the problem. Also, the
1148 authentication between the deamons is changed, so all daemons
1149 must be simultaneously upgraded.
1150 ==============================================
1151 If you don't like this fix, set:
1152 const bool compatible = true;
1154 const bool compatible = false;
1157 kes Ensure that DB signature is never NULL.
1158 kes Ensure that DB table names are not translated.
1159 kes Fix scheduler to handle time skew (eg daylight savings).
1160 kes Fix scheduler to use lock_jobs() to avoid most problems
1161 with reload. Window is now milliseconds.
1163 kes Apply patch from Christopher Hull
1164 kes Allow multiple connections to database with different
1166 kes Invalidate the scheduler when doing a reload. Fixes seg
1167 fault, but still 60 second window.
1168 kes Additional info in Reschedule message.
1169 kes Use set_jcr_job_status() everywhere to prevent loss of
1171 kes Display peer IP in FD if error from connecting DIR.
1172 kes Don't increment file count for DIRBEGIN.
1173 kes Replace illegal characters in Win32 filename by _.
1174 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1175 kes Hash hard link filenames rather than linked list.
1176 kes Fix for security failure in chdir on Win32.
1177 kes Add CreateDirectoryA/W win32 API entry points.
1178 kes Add /silent option to Win32 FD for Install/Remove service.
1179 kes Always print Heap statistics in FD.
1181 kes Remove the -f option from the chown in Makefile.in for more
1183 kes Change setting the group in Makefile.in to use chgrp for
1185 kes Implement a write_store and read_store to replace
1186 dirstore in reserve.c
1187 kes Implement a Bacula read/write lock for Python rather
1188 than using the Python lock to avoid recursive problems.
1189 kes Correct the uninstall directory names in filed/Makefile.in
1190 as reported by a user.
1192 kes Correct some problems with database creation (new tables).
1193 kes Replace a bunch of old 0x%x by %p.
1194 kes Get first cut of Migration with Job selection working.
1196 kes Change store_bit() to store_bool() for the Spooling in
1197 dird_conf.c -kes bug reported by Robert Nelson.
1199 kes Correct Makefile bug found by Dan Langille.
1201 kes Correct Makefile for Solaris /bin/sh
1202 kes Correct mtx-changer.in for Solaris /bin/sh
1203 kes Abort if a conf resource does not have a Name =
1205 kes Change the name of the regex program to bregex.
1206 kes Add the bwild program to the tools directory. It is similar
1207 to the bregex program.
1208 kes Implement create bregex.h and bregex.c in src/lib from the
1209 Python regexp program.
1210 kes Use the new bregex.c to implement Regex expressions on Win32.
1212 kes More work on migration.
1213 kes Implement wild program in tools directory for testing
1214 wild-cards. Almost identical to the regex program.
1215 kes Up port VSS single thread locking code.
1216 kes Replace N_(..) by NT_(...) to inhibit translation of
1218 kes Modify Makefile to change the permissions on Working Directory
1219 to 770 if the directory is created.
1220 kes Do not fail the Makefile if changing the permissions or
1221 owner/group on WorkingDir fails.
1222 kes Remove early selection of Scratch Volumes in the recycling
1224 kes Correct the old recycling algorithm so that Scratch Volumes
1225 are selected when looking for a Volume in the changer.
1226 kes Correct a typo in the Verify SQL reported by Joe Park.
1228 kes Remove automatic case folding on Windows FDs. You must
1229 explictly use the 'Ignore Case = yes' option.
1230 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1231 scratch volume in an Autochanger early in the 'recycling'
1234 kes Make weof() and clrerror() methods of class DEVICE.
1236 kes Tweak license to include Microsoft restrictions.
1237 kes Move mysql.reconnect to after real_connect(). Thanks to
1238 Frank Sweetser for the patch.
1239 kes Disallow a backslash in a File = directive (Windows junk)
1240 unless the string is quoted.
1241 kes Apply Eric's patch to ua_label.c so that daemon protocol
1243 kes Add NT_ definition for strings that should not be translated.
1244 kes Apply NT_() to ua_label.c
1245 kes Remove timed wait for VSS on Win2K3 as it is not yet
1247 kes Correct bacula.in script to reference bacula-ctl-xx in the
1248 sysconfig directory rather than the bin directory.
1250 kes Fix a long standing bug in the bacula start/stop scripts.
1251 kes Attempt to add the new bacula-ctl-* files to the rpm.
1252 kes Switch to using typeof() for list traversing to avoid
1253 as many FC5 g++ compiler warnings as possible.
1255 kes Split the bacula start/start script into four files:
1256 bacula -kes starts and stops calling other scripts
1257 bacula-ctl-dir -kes starts/stops the director
1258 bacula-ctl-fd -kes starts/stops the File daemon
1259 bacula-ctl-sd -kes starts/stops the Storage daemon
1261 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1262 kes Correct editing of JobId from int to int64 in fd_cmds.c
1263 kes Eliminate FileSet name race with bash_spaces() and multiple
1264 threads by bashing in a local.
1265 kes Fix error return from 'use storage' to print a correct error
1266 message rather than nothing.
1267 kes Correct false re-read last block error message when two jobs
1268 are simultaneously writing at the end of a tape.
1269 kes Simplify exit conditions in the reserve.c code to avoid
1270 possible non-release of reservation_lock().
1271 kes Suffle lock order in reserve to avoid deadlock between
1272 reservation lock and device mutex.
1274 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1275 tracking this down for me !!!! as it broke the Win32 build.
1277 kes Integrate addition of line count limitation to bsmtp -l from
1278 Sebastian Stark <stark at tuebingen.mpg.de>
1280 kes Implement regex test program in tools directory.
1281 kes Attempt to fix time problem with bsmtp with foreign langs.
1282 kes Add strip_trailing_newline() submitted by user.
1283 kes Implement regex matching in migrate.c
1285 kes Fix bug #537 to allow arbitrary time to mount a volume for
1286 restore, if polling is turned on.
1287 kes If dir_user or dir-group is specified in ./configure apply it to
1288 the working-dir. Fixes bug #533.
1289 kes If rescheduling a job cancel the previous incarnation with the SD.
1290 Fixes bugs #566 and 557.
1291 kes Fix bug #567 do_message() definition type conflict.
1294 kes Add more jcr methods and make mutex and use_count private.
1295 kes Create lock/unlock methods for jcr.
1296 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1297 records to get to seek position.
1298 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1299 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1300 terminates correctly by doing pthread_kill(). Do not destroy
1301 SD cond wait variable between executions of the job. Use local
1302 mutex for cond variable to avoid blocking jcr chain. Fix poor
1303 use of jcr use count in jobq.c for restarted jobs.
1304 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1305 lib/jcr.c -kes prevents locking the jcr chaing.
1306 kes Apply patch from bug #564, which corrects listing volumes with
1307 multiple autochangers. Apply same fix to next volume list.
1308 kes Fix bug #562 where restore bootstrap file is not unique.
1309 kes More details in implementing David's migration syntax proposal.
1310 kes Save and restore dcr when swapping drives so that if we have
1311 a write dcr it is not lost.
1312 kes Use new routine lock_reservations() to lock the reservations
1313 system, and call it while looking for a volume in askdir.c.
1314 This could possibly fix bug #543.
1315 kes Stop SD command loop if job is canceled.
1318 kes Remove old code from findlib/create_file.c
1319 kes Rename mac.c migrate.c
1320 kes Add user friendly display of VolBytes in job report.
1321 kes Rename target... to previous... to make it a bit easier to
1323 kes Add selection type and selection pattern to Migration (idea
1324 given by David Boyes).
1327 kes The po files should now be current.
1328 kes Fix new sql_use_result() code to properly release the
1329 buffers in all cases.
1330 kes Use the keyword ujobid to mean the unique job id; job or jobname
1331 to mean the Job name given on the Name directive, and jobid to
1332 be the numeric (non-unique) job id.
1333 kes Allow listing by any of the above.
1334 kes Add the user friendly job report code for reporting job elapsed time
1335 and rates with suffexes from John Kodis <kodis at comcast.net>.
1336 kes Add Priority and JobLevel as Python settable items.
1337 kes Use TEMPORARY table creation where the table is created by
1339 kes Add new code submitted by Eric for waiting on specific jobid.
1340 kes Add ACL checking for the dot commands.
1341 kes Fix restore of writable FIFOs.
1342 kes Fix a bug in bpipe where the string was freed too early.
1344 kes Modify the Python class examples to inherit object -kes new way
1345 of defining classes. Patch from Felix Schwarz.
1346 kes Implement jobuid to replace old usage of job in keywords as
1347 suggested by Eric Bollengier.
1348 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1349 wait (wait for all jobs to stop)
1351 wait jobuid=unique id
1353 kes Implement write variables for Python to set Priority (anytime), and
1354 Job Level, only during JobInit event.
1356 kes Fix the block listing bug pointed out by Arno.
1357 kes Update the po files at Eric's request.
1359 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1360 accept time qualifiers.
1361 kes Make catalog respect ACL.
1362 kes Add recycle count to Media record.
1364 Changes to 1.39.6-beta1 24Feb04
1366 kes Add Rudolf Cejka's new rc-chio-changer.
1367 kes Implement pulling Volume from Scratch Pool if the
1368 Volume is in the autochanger.
1369 kes Implement additional command arguments for update Volume.
1373 kes Back port changes to 1.38.5
1374 kes Fix recycle SQL for StorageId.
1375 kes Fix misplaced quote in mtx-changer script.
1377 kes Note. Your database must be updated, or you must create
1378 a new database. I have not yet incremented the database level.
1379 kes Add Location table.
1380 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1382 kes Implement create/get mac record in database for adding extended
1383 Migration data to the job record.
1384 kes Add new MAC table to update/make database scripts.
1385 kes Return Storage name used when getting VolumeNames for a job.
1386 kes Change bsr file keyword Storage to Device, which is more accurate.
1387 kes Ensure that Mac records are pruned/purged.
1388 kes Tweak SD tools to deal with changing media type.
1389 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1390 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1391 that the subroutine can switch devices, and hence dcrs.
1392 kes Modify the multiple MediaType read code to re-use the same
1393 dcr when switching devices. This makes the code much more
1395 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1396 from a table for restore.
1397 kes Add Storage name to VolParams, but it really should be Device.
1399 kes Add disk-changer to scripts directory + configure/Makefile
1400 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1401 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1402 kes Implement new store_bool that stores in a bool.
1403 kes Add true/false to yes/no conf directives.
1404 kes Make first cut at changing appropriate store_yesno to store_bool.
1405 kes Complete implementation of Pool storage devices.
1406 kes Move starting clones to job.c
1407 kes Move create_restore_bootstrap_file() to job.c
1408 kes Make copy_storage() more general to be able to handle
1410 kes Cleanup a lot of migration code for manual running, including
1412 kes Move getting a scratch Volume into a subroutine.
1413 kes Make all places a Volume that is added to a pool to
1415 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1416 kes Fix segfault in restore command when no value specified.
1417 kes Start adding code to handle multiple MediaTypes in restore.
1418 kes Eliminate race condition in getting Volume name for
1419 two drive autochanger.
1420 kes More debug code in autochanger.
1421 kes Add storage keyword to bootstrap file, add parsing.
1422 kes Move slot in bsr file into Volume record as there will be
1423 a different slot for each Volume.
1424 kes Create reserve.h
1426 kes Implement Pool storage overrides.
1428 kes Implement first cut of Migration.
1429 kes Implement mysql_use_result() from patch by Karl Hakimian.
1430 This reduces significantly the memory consumption during
1431 the restore tree building, and hence runs faster too.
1432 kes Implement StorageId patch supplied by user (reggie) in bug
1433 #536. This should permit Bacula to work correctly with two
1435 kes Implement Job listing variations suggested by a user.
1436 kes Move updating bootstrap code in backup.c to subroutine
1437 update_bootstrap_file().
1438 kes Add new job status elapsed time and bytes written user
1439 friendly job report output patch sent by John Kodis
1440 <kodis at comcast.ne>.
1441 kes Implement a storage list in Pools.
1442 kes Separate out setup_job() code from run_job().
1443 kes Get migration working -kes lots of changes in mac.c in both
1445 kes Apply patch from user (Eric Bollengier I think) that fixes a
1446 DIR crash when no arguments are supplied to a dot command.
1447 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1448 kes Fix command arg name->volume in label command of gnome-console.
1449 kes Fix SD acquire.c to release correct DCR by explicitly testing
1450 on the dcr address rather than trying to devine if it is a read
1451 or write dcr. This failed in error conditions when the device was
1455 kes Apply user supplied patch for more readable rate output
1457 kes Continue implementing migration.
1458 kes Implement support for removable filesystems in SD.
1459 kes Ensure that btraceback scripts can be read by anyone.
1460 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1461 kes Correct bug where canceling restore before the FD contacts
1462 the SD causes the drive to be left in read mode.
1463 kes Move ofline_or_rewind into DEVICE::close().
1464 kes Eliminate close_device.
1465 kes Convert several dev subroutines to methods (e.g. bsf,
1467 kes Eliminate force_close_device().
1468 kes Implement Device Type directive in Device resource that
1469 can have values File, Tape, Fifo, DVD, or Prog.
1470 kes Add has_cap() method to Device.
1473 kes Add patch from bug #527 to allow RedHat user to specify
1474 options/user/group for starting each daemon in
1475 /etc/sysconf/bacula.
1477 kes Add two new queries to query.sql provided by Arno. One
1478 list volumes known to the Storage device, and the other
1479 lists volumes possibly needing replacement (error, ...).
1481 kes Add periodic (every 24 hours) garbage collection of memory
1482 pool by releasing free buffers.
1484 kes Correct bug counting sized (for display only) in smartall.c
1485 kes Print FD mempool stats if debug > 0 rather than 5.
1487 kes Make db_lock() mutex error fail the job rather than abort
1488 Bacula. Canceling the job caused the mutex to fail.
1489 kes Correct bug in alist.c that re-allocated the list if the
1490 number of items goes to zero.
1491 kes Move the reservation system thread locking to the top level
1492 so that one job at a time tries all possible drives before
1494 kes Implement a reservation 'fail' message queue that is built
1495 and destroyed on each pass through the reservation system.
1496 These messages are displayed in a 'Jobs waiting to reserve
1497 a drive' list during a 'status storage='. Note, multiple
1498 messages will generally print for each JobId because they
1499 represent the different problems with either the same drive
1500 or different drives. If this output proves too confusing
1501 of voluminous, I will display it only when debug level 1
1502 or greater is enabled in the SD.
1504 kes Add enable/disable job=<job-name>. This command prevents
1505 the specified job from being scheduled. Even when disabled,
1506 the job can be manually started from the console.
1507 kes During 'update slots' clear all InChanger flags where the
1508 StorageId is zero (old Media records).
1510 Beta release 1.38.4:
1512 kes Fix autochanger code to strip leading spaces from returned
1513 slots number. Remove bc from chio-changer.
1514 kes Back port a bit of 1.39 crypto code to reduce diffs.
1515 kes Fix first call to autochanger that missed close()ing the
1516 drive. Put close() just before each run_program(). Fixes
1519 kes Add PoolId to Job record when updating it at job start time.
1521 kes Pull in more code from 1.39 so that there are fewer file
1522 differences (the new ua_dotcmds.c, base64.h, crypto.h
1523 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1524 util.c. Aside from ua_dotcmds.c these are mostly crypto
1526 kes Implement new method of walking the jcr chain. The
1527 incr/dec of the use_count is done within the walking
1528 routines. This should prevent a jcr from being freed
1529 from under the walk routines.
1534 kes Start implementing Verify list output.
1535 kes Move the suitable_drive flag to a better place to prevent
1536 premature termination of the reservation if all drives
1537 are busy -kes should fix Arno's diff/inc pool failures.
1539 kes Add mutex to single thread VSS code in Win32.
1541 kes Simplify code in askdir.c that waits for creating an appendable
1542 volume so that it can handle multiple returns from the wait
1544 kes Modify the wait code to permit multiple returns.
1545 kes Return a zero when 'autochanger drives' is called and
1546 it is not an autochanger.
1547 kes Make rewind_dev() a method taking a DCR as an argument.
1548 This permits closing and reopening the drive if the
1549 rewind fails as happens if the drive was loaded while the
1550 file descriptor was open. This refreshes the file descriptor.
1551 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1552 if the device is open or not. This should eliminate
1554 kes Return error if reserve cannot find at least one suitable device.
1555 kes Make wait_for_sysop() return correct state information.
1556 kes Fix Win32 state file problem. write was not using compat
1557 code. This should fix bug #500.
1559 kes Modify gui on command to set only GUI mode and not batch.
1560 kes Modify .messages command to always print messages regardless
1562 kes If GUI mode is on, suppress automatic printing of
1564 kes Delete old bnet packet code.
1565 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1566 wx-console. -kes not implemented because bconsole must be updated.
1567 kes Modify restore command in wx-console to set gui on and to use
1568 only .messages instead of messages. Hopefully this fixes bug
1570 kes Fix seg fault in exit of acquire when canceling a job --
1571 reported by Wolfgang Denk
1572 kes Pull in latest reservation system changes from 1.38
1573 kes Make .messages command always print messages regardless
1574 of the automessages flag.
1576 kes Fix seg fault if user labels a drive directory bug #513
1577 kes Remove quotes around Version as it breaks things.
1579 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1580 kes Apply sparse code fix for raw drives and fifos. Bug 506
1581 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1583 kes Correct reservation system to do a last ditch try
1584 for any mounted volume, then anyone anywhere.
1585 kes Add quotes around table Version because of
1586 error in MySQL 4.1.15 -kes bug report submitted.
1587 kes Correct some minor problems with btape in the fill
1589 kes Updates to ssh-tunnel from Joshua Kugler.
1590 kes Added a report.pl program from Jonas Bjorklund.
1591 kes Simplify the O_NONBLOCK open() code for tape drives,
1592 and always open nonblocking.
1593 kes Do not wait for open() if EIO returned (shouldn't happen).
1594 kes Eliminate 3 argument to tape open().
1595 kes Correct the slot # edited in the 3995 Bad autochanger unload
1597 kes With -S on bscan (show progress) do not divide by zero.
1599 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1600 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1601 kes Remove unused code in wait_for_device.
1602 kes Make wait_for_device() always return after 60 seconds of wait.
1606 kes Add stubs for non-crypto build.
1608 kes Use localhost if no network configured
1610 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1611 kes Remove debug print.
1612 kes Add bail_out in error during state file reading.
1614 kes Merge changes made to 1.38.3 into HEAD
1615 kes Add stubs for pygtk-console code
1616 kes Create Makefile.in for pygtk-console code
1618 kes Merge updates into 1.38 branch
1619 kes Update specs to include mysql4 define.
1620 kes Fix when attributes are sent, must be after binit().
1621 kes Stop read_record() if status not ok in second loop.
1622 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1623 and partial records in read_record(). This allows bscan
1624 to get FileIndex at EOT correct.
1625 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1627 kes Fix Win32 built to work with new crypto code.
1628 kes Apply patch supplied by user (slightly modified) to fix
1629 correct detection of holes in block devices and FIFOs.
1631 kes Apply patch supplied by user (slightly modified)
1632 to fix SD hang with multiple pools and bad client
1633 IP. Fixes bug # 508.
1635 kes Add nagios plugin to the examples directory. Submitted by
1637 kes Remove warning message about multiple saves of hardlinked files
1638 from find_one.c as it can generate too many warning messages.
1639 kes Modify most restore error messages to be queued so that they
1640 appear at the end of the job rather than mixted with the restore
1641 listing where they could be 'lost'.
1643 kes Reset timeout values before select() per patch from
1644 Frank Sweetser for problems with non-blocking sockets.
1645 kes Unlink the state file if either reading or writing it gets
1646 errors. Hopefully this will fix Win32 exit problems.
1647 kes Add sanity check in append.c to ensure that dcr is not NULL.
1648 This can happen if multiple drive autochanger SCSI control
1649 channel and drive indicies do not correspond.
1651 kes Get next volume from Scratch pool before creating a volume.
1652 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1653 kes Remove argument from create_bacula_database for SQLite as it
1655 kes Add back index code so that two drive autochangers can get
1657 kes Change a bunch of debug levels to aid debugging autochangers.
1658 kes Fix reservation so that mutexes are properly applied.
1659 kes Rework reservation algorithm so that two drives can be used
1662 kes Landon merged his data encription changes into the HEAD
1663 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1664 If this patch is applied, the number of days can be specified with
1665 'list nextvol days=xx'
1667 'status dir days=xx'
1668 My use case is to be able to preview the next scheduled job (and the
1669 next tape to be used) on fridays if there are no scheduled jobs during
1673 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1674 kes Fix malformatted bnet error message that caused seg fault
1676 kes Applied user patch to improve README.vc8 in src/win32.
1678 kes Add Migrate, Copy, Archive Job types (some where there)
1679 kes Correct some more editing of JobId's (for 64 bit compatibility).
1680 kes Ensure that StorageId is stored in Media record when ever possible.
1681 kes Add Migration Job to Job.
1682 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1683 Next Pool to Pool resource.
1684 kes Add more code to mac.c (migration archive copy).
1685 kes Change Start Storage daemon job to require read and write storage
1687 kes Pass read storage data to SD as well as write storage data.
1688 kes Remove old code from winservice.cpp
1689 kes Break on error in scan.
1690 kes Fix typo in signal.c
1691 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1692 kes Cleanup how find_device() works.
1693 kes Add read output to Status in SD.
1696 kes Add red-black btree routines
1698 kes Remove abs() in bfile.c so that it compiles on Solaris.
1701 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1702 kes Fix bnet-server bug found on OpenBSD. Bug #486
1703 kes Fix cancel failure bug. Bug #481
1704 kes Fix failure when Pool name has spaces. Bug #487
1705 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1706 kes Fix a couple of free()s in src/filed/acl.c
1707 kes Fix memory overrun in bfile.c in building OS X resource
1708 fork filename. Bug #489
1709 kes Add Pool name to SD status output.
1711 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1712 kes Make sure to set storage before trying to set drive.
1713 kes Add bacula_mail_summary.sh to examples directory. It makes
1714 a single email summary of any number of jobs. Submitted
1716 kes Make sure when we do a mount to unblock the device even
1717 if the drive could not be opened.
1719 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1720 and correct a few minor problems to make it build on Linux.
1722 kes Remove delete of CVS from all Makefiles
1723 kes Fix seg fault when clicking on Add button in wx-console
1724 restore panel. Bug #470.
1725 kes Fix copyright date and URL typo -kes bug #468.
1726 kes Change autostart install for FreeBSD to look for rc.conf
1727 rather than rc.local as suggested fix for bug #466.
1728 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1729 grant on status. Bug #465
1730 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1731 update script. Bug #464
1732 kes Tweak #ifdefing a bit in new Win32 stream code.
1733 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1734 kes Add documentation of performance #defines
projects / bacula / bacula / blob