1 Technical notes on version 1.39
5 kes Add Volume name to Forward spacing message.
6 kes Update migration job start time (so it is not zero) to prevent
7 immediate recycling of the job. This *should* fix bug #733.
9 ebl Fix runscript configuration parsing bug.
11 kes Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
12 Remove NLS kludge from baconfig.h. This fixes bug #729.
13 kes Allow seeking on DVD.
14 kes Add additional messages when Job canceled automatically for
15 max run time or max start wait exceeded. This fixes bug #621.
16 kes Update maxruntime-test in regression script to properly test
17 max run time -- from info given in bug #621.
18 kes Simplify automatic cancel code.
19 kes Add check for job_canceled() in FD when contacting SD so that if
20 job is canceled from max runtime, it terminates faster.
22 kes Save and restore volume name in stored/mount.c fixed bug #712
23 where wrong tape was requested in a mount.
24 kes Implement cleaner orphan buffer dumping with buf address.
25 kes Fix orphaned buffer when canceling job waiting on op intervention.
26 kes Update projects file for next vote.
27 kes Implement a fix (more could be done) for bug #728 where a double
28 EOF is writing on the Volume when spooling is enabled and the
29 connection with the FD fails (FD crash, comm error).
30 kes Disable attempting to autolabel when polling and device is not
31 a tape. This fixes bug #730 where polling with a removable disk
32 not mounted caused lots of new Volumes to be created then marked
35 kes Enable VSS by default.
37 kes Complete hopefully the last of the copyright transfer changes.
38 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
39 that migration writing to multiple volumes doesn't mess up reading
40 Volumes. This should fix bug #720 -- multivol migration fails.
41 kes Make migration SQL look only for Type='B' jobs to migrate. This should
42 fix bug #724 jobs getting migrated twice.
43 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
44 kes Implement dev->clear_cap() and dev->set_cap() methods.
45 kes Turn off disk seeking on restore for DVDs since I am not 100%
48 kes Implement code that should properly set that a job was migrated,
49 if the migration was successful even if there were no file to
51 kes Apply Richard's patch to fix building or filed/restore.c without
53 kes Ensure that at least one block is written by the SD even if the
54 FD dies or fails -- should fix bug #728.
55 kes Convert stored/record.c ASSERT into a soft fail if the length of
56 a record is too insanely long. This should fix bug #???
58 kes Fix automatic labeling of File volumes, which was broken by new
59 removable device code.
61 kes Remove typedef uLong for HP in baconfig.h. It broke things.
62 lf Fix job byte reporting -- the digest code runs in verify.c and
63 increases this value. The better solution is to digest the
64 stream as we receive it, thus removing the need to re-read
65 from disk at all, but that requires more extensive and
66 potentially destabilizing changes.
67 lf This commit fixes backup and restore of HFS+ resource forks.
68 lf Add a long-missing 'break' statement in HFS+ attribute
69 handling that resulted in restore failures.
71 ebl Fix runscript to always execute command after all job type.
73 Version 1.39.30 released:
75 kes Mark build-depkgs-mingw3 executable in configure process.
76 kes Update autoconf/config.h.in to include LOCALEDIR
77 kes Undefine NLS settings for wxWidgets as there is a conflict with
78 their way of doing things.
79 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
80 kes Change a bunch of ->hdr.name to ->name()
81 kes Straighten out handling of read and write pools for Migration, including
82 getting the code in the proper order.
83 kes Improve migration error messages and debug output.
84 kes Shorten code path in migration if nothing found to do.
85 kes Implement read/write pool in migration job report.
86 kes Move ua_run.c select_job_level code into a subroutine (readability).
87 kes Move ua_run.c display_job_parameters into a subroutine.
88 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
89 restore dependent on a valid catalog containing the Volume name.
91 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
92 make it easier for the user to change.
93 kes Fail any backup job that tries to use encryption and sparse options.
94 Hopefully this is a temporary change.
95 kes Correct the EndJob return string for non-backup jobs.
96 kes Review the encryption restore code.
97 kes Implement a new encryption regression test with compression.
98 kes Modify migrate not to fail if nothing found to migrate.
99 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
100 because they were not always set correctly.
102 kes Update configure.in to include python 2.5 search.
103 kes Back out unwanted migration change reported by Richard Mortimer.
105 kes Make migration with no files to migrate set normal termination.
106 kes Change message when job manually started to say Job queued. ...
107 kes Add job report indication of whether or not VSS and Encryption were
109 kes Modify sparseBlock variable name to make the code clearer.
110 kes Add more sparse tests to regress using gigaslam sparse file
112 kes Enable data encryption code.
113 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
114 only two blocks -- i.e. it is a real sparse file.
116 kes Enable disk seeking on restore.
117 kes Implement the SD 'Block Positioning = yes|no' directive. This
118 allows the user to turn off block level seeking, but restores
120 kes Change the word illegal to read invalid in a few places.
121 kes Fix Win32 build, which broke when I added parse_args_only in
122 lib. I'm not sure I got the entry point right for msvc.
123 kes Turn off data encryption. It can be enabled by defining
124 DATA_ENCRYPTION in src/version.h and recompiling.
125 kes Implement flag to turn off data encryption feature.
126 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
128 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
129 The main problem was that signatures were being generated on blocks
130 of zeros, which is unnecessary.
132 kes Fix scanner (next_arg) to handle leading double quote correctly.
133 kes Modify cd command in restore tree to look at full argument without
134 keywords. This fixes bug #716.
136 kes Do not update Migrated Job type if migration does not terminate
137 normally. This fixes bug #719.
138 kes Update ReleaseNotes
139 kes Purge Job records from the catalog for Migration. This was
140 not properly done previously. This fixes bug #718.
142 kes Initialize msg_type to M_INFO in migration. Pointed out by
144 kes Add some fflush() statements for debug output. This should not
145 really be necessary and defeats buffering but users continue
148 kes More copyright changes.
149 kes Make sure we don't detach from the despool read device since it
150 is a temporary structure where the condition variables are not
151 initialized. Bug #711.
153 kes Add Bacula version+date to Client record. This is a very minor
154 security problem in that passing the version facilitates a hacker's
155 life, but it will make support easier.
156 kes Implement fixes to make disk seeking work. Currently turned
157 off in version.h pending reserch on what problems it will cause
158 because of the previous bsnprinf() sign extension bug.
160 kes Add Landon's refactor of restore Feature request to the
162 kes Tweak debug levels and messages for examining the disk
165 kes Cleanup some of the error termination code in migration.
166 kes Separate read/write source strings to keep track of where
167 storage devices are used in a job.
168 kes Implement a new method of keeping track of which storage
169 device is used in a Job. USTORE keeps both a pointer to the
170 resource and to the source string.
171 kes Modify all code to use new storage set subroutines in job.c
172 kes Modify migrate.c so that the definitive selection of the storage
173 resource is done in the do_migration_init() routine prior to
174 the job going into the job queue. This permits accurate
175 deadlock detection (same read and write storage resource).
176 kes Remove bfill from btape (I think it was a left over stub).
178 kes Make sure that the storage for a job is pulled first from
179 the Pool and if not from the Job.
180 kes Ensure that either the Pool or the Job specifies a Storage
183 kes Start applying new FSFE copyright.
185 kes Add additional error messages in acquiring a drive for read.
186 kes Make WritePartAfterJob the default so that the last DVD part
187 always gets written to the DVD by default.
188 kes Add additional error messages in migration.
189 kes Suppress redundant error messages in migration (possibly more to do).
190 kes Apply Martin's fix (updated to 1.39) that takes into account
191 run storage overrides in the Director status display.
192 kes Implement, but turn off the submitted code that sets the EOT
193 model on FreeBSD machines. Turning on this code is too risky at
194 this point in the development.
196 kes Implement unique dbid routine for migration to prevent the same
197 JobId from being migrated twice. This should fix bug #709.
199 kes Apply Jaime Ventura's 'mail on success' patch.
200 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
201 if memory usage gets too big.
202 kes Tweak migration to ensure that read/write devices are different.
204 kes Create an AUTHORS file to list Bacula contributors.
205 kes Add Richard Stallman's four GPL freedoms to LICENSE
206 kes Require the conf file to have a valid NextPool for writing the
209 ebl Enable RecycleCount in catalog.
210 ebl Fix "echo python | bconsole" segfault
212 kes Implement code to pass the MediaId to the SD. The SD then uses
213 this MediaId when creating JobMedia records. This fixes a bug
214 with Migration where the MediaId got set to the second Volume
215 read rather than the write Volume. Possibly (unlikely) fixes
217 kes Remove NextPool from Job resource.
218 kes Edit a few numbers in the restore dialog with commas.
219 kes Note, the DIR<->SD protocol has changed.
221 kes Replace () by {} in configure.in for proper HP configuration.
222 kes Shorten some lines over 80 characters in filed/backup.c
223 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
225 Version 1.39.28 released:
227 kes Change error message 'illegal' to 'invalid' -- bug #707
228 kes Add rather primitive device resource deadlock detection in
229 the job queue handler. It detects the same read and write device
230 for migration and cancels the job.
231 kes Start adding a unique_dbid_hander() routine in migration to avoid
232 duplicate mediaids and duplicate jobids.
233 kes Add patch from bug #708 to permit relative paths such as ../xxx
234 in the restore tree routine.
235 kes Add Eric Bollengier's patch to reduce locking time in the SD after
236 despooling, and thus many jobs finish faster.
237 kes Correct locking order of reservations lock and device mutex in
238 reserve.c -- this should correct Arno's deadlock that occurred
239 when doing mount/unmount at the same time a job is reserving a
242 rbn Fixed problems with encryption when combined with compression
243 or sparse files. Unfortunately this means that all previous
244 encrypted backups can't be restored.
245 rbn Fixed problem in bfgets with Windows and Mac end of lines.
246 rbn Fixed bug in Windows version of close_bpipe() that cause programs
247 like bsmtp() to hang waiting for the pipe to be closed. Fixed
248 binary file type problems in open_bpipe().
249 rbn Fixed a number of bugs in the mysql DB scripts.
251 ebl Fix broken runscript on director. (RunBefore, RunAfter)
252 ebl Use M_ERROR instead of M_FATAL in runscript.c
254 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
255 rbn Ignore UTF-8 marker at the start of .conf files.
256 rbn Add stab2cv to 3rd party dependencies. This is a utility I
257 wrote that is licensed under the GPL and available on SourceForge.
258 It converts the stab debugging info generated by gcc into Codeview
259 format. Currently it just translates function names to global
260 symbols. This is sufficient to get reasonable stack traces from
261 Dr Watson and to look at minidumps.
262 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
263 rbn Enable Windows XP look and feel for the tray icons and wx-console.
264 rbn Add Windows specific FileSet example to bacula-dir.conf.
265 rbn Reorganize Start menu so that documentation and configuration are
268 rbn Change daemons and utilities so that if -c is omitted from the
269 command line AND there is no configuration file in the current
270 directory then the 'standard' configuration file (eg
271 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
272 doesn't contain any path separators AND there is no configuration
273 file by that name in the current directory then the 'standard'
274 configuration file directory will be searched for a file by that
276 rbn Fixed restore on Windows so that backslashes as path separators works.
277 rbn Add missing query.sql file to Windows installer.
278 rbn Fixed Windows versions of catalog backup scripts.
280 kes Fix optional files in Makefile.in of src/filed that caused
281 a syntax error when using no optional files.
283 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
284 messages; there is no reason to attempt to load a private key.
285 from master key files.
287 Version 1.39.26 released:
289 kes Apply the three patches from Richard Mortimer.
290 bacula-reposition.patch, bacula-tape-reopen.patch, and
291 bacula-eod.patch. This corrects tape positioning on older devices,
292 and also a problem with btape.
293 kes Apply fix from bug report #696 where writing to a FIFO does not
294 work due to a dumb typo.
295 kes Unlock the tape door before the file descriptor is released. This
296 should fix lots of somewhat subtle failures when using an autochanger.
298 kes Correct mtx-changer bug that I introduced in a recent commit, and
299 pointed out by Robert Nelson -- thanks.
300 rbn Fix Windows' daemons so that messages print to stdout if not
301 running as a service.
302 rbn Add daemon name to trace file name (eg bacula-dir.trace).
303 rbn Fix environment variable expansion in directory names on Windows.
304 rbn Fix autochanger support in fill command.
305 rbn Update SQL scripts to match Unix versions.
306 rbn Fix daemon usage displays.
307 rbn Cleanup bacula-dir.conf template.
308 rbn Install openssl.cnf so that the openssl.exe installed in the
309 Bacula\bin directory can be used to generate keys and
310 certificates for TLS and encryption.
311 rbn Fix cleanup of spool files on Windows.
312 rbn Remove /silent option from daemons on Windows. The new default
313 is the same as the old /silent. To enable the message boxes that
314 previously were suppressed by /silent you must add /debug instead.
315 NOTE: As a result of this change, the first time you upgrade from
316 a previous version of 1.39.x you will receive the message
317 boxes when the remove of the old services succeeds. This
318 is the same behaviour as when migrating from a version prior
320 However, going forward, these message boxes will not appear on
321 upgrades or new installs.
322 rbn Add new /debug option. This option enables the message boxes that
323 previously were suppressed by the /silent option. In addition the
324 daemons running as services will open a console window if this
326 rbn Fix bug with service not being removed on migrated installs. This
327 should correct those cases where the file daemon install was failing
328 when upgrading from versions prior to 1.39.x.
330 kes Turn on heap reporting in Dir with zero debug level.
331 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
332 send the same message to stdout.
334 kes Begin work on new GUI 'console'.
335 kes Make configure look in non-standard MySQL library directory
337 kes Make mtx-changer automatically configure the autochanger wait
338 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
340 kes Correct drop_sqlite_tables.in script to not delete the database.
341 kes When writing to a log file, close and reopen the file descriptor
342 if there is an error writing the file.
343 kes Modify the autochanger loaded?, load, and unload commands to print
344 the full text of any mtx output if there is an error. Helps to
345 ease diagnosis of autochanger problems.
346 kes Correct a few Win32 errno returns in the VSS code so that hopefully
347 a resonable Win32 error message will be printed.
348 kes Convert a few strcat()... to bstrncat() in the Win32 code.
350 rbn Added Windows version of bsmtp.
351 rbn Fixed path search for Windows so that Bacula\bin is automatically
352 searched for programs and scripts.
353 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
356 Version 1.39.24 released:
358 kes Apply dvd find volume patch from Richard Mortimer.
359 kes Eliminate the dvd specific mount routines using only the
361 kes Make update_free_space a method of DEVICE and rename
364 kes Require a messages command acl to be able to receive messages
366 kes Add console, system, and scan job types in util.c.
368 kes Print the Volume purged message only for real jobs to keep
369 from cluttering up the daemon messages.
370 kes Lock the tape drive door while Bacula is using the device.
371 kes Add back the 'No Jobs running' message to FD and SD status because
372 my regression script depends on it, and I'm too lazy to change the
374 kes Start using structure assignments (not too happy about it ...).
375 kes Fix a bug in the tools Makefile that broke on Solaris.
376 kes Unload any autochanger drive during a 'release' command.
378 kes Enhance error message when restoring without bootstrap file.
379 kes Check restored size only for regular files.
380 kes Store Python job level in job record in Dir.
381 kes Add back code to open tape device nonblocking, but if rewind fails
382 release file descriptor.
383 kes Modify acquire.c to first try autoloading the device. Also, ask operator
384 to mount tape if drive cannot be opened.
385 rbn Made Windows service tray status windows resizable.
386 rbn Fixed horizontal scrolling of text in status window.
387 rbn Preserve horizontal and vertical scroll position while
388 updating. This prevents the display being reset to the
389 top line every 5 seconds.
390 rbn Fix Windows cross-compile compatibilty problems with
391 *nix variants such as OS X without the zic command.
392 rbn Eliminate dependency on man2html.
394 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
396 kes Fix a compiler warning in compat.cpp
397 kes Change strcpy to bstrncpy in compat.cpp
398 kes Remove some broken code in bdb_list.c
399 kes Fix, hopefully the last, ACL problem in the restore command.
400 kes Update the README.mingw32
401 kes Add new version of upgrade-win32-client.txt to examples directory.
402 Submitted by Michel Meyers.
403 kes Print an INFO message in the job report when a Volume is marked Purged.
404 rbn Fixed handling of external program and script execution
405 so that the format of the command line is more flexible.
406 Now executable path names containing spaces are translated
407 to the equivalent short name automatically. The result is
408 passed to cmd.exe with the quotes removed.
410 kes Apply the recycle patch from Richard Mortimer.
411 kes Convert a few if statements in dev.c to switch statements.
412 kes Start using print_errmsg instead of bstrerror().
413 kes Print a job message in SD when a job is marked to be canceled.
415 kes All code added back. Fixed block.c read/write to loop only 3
416 times. This apparently keeps the OS from crashing (at least
418 kes The kernel bug still persists. Backup something then immediately
419 do a bscan on the same tape, and the kernel will crash.
420 kes Simplifed tape open(). It no longer uses nonblocking mode, which
421 means that opening with no tape loaded will probably take at least
422 6 minutes before an error is reported.
423 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
424 when doing set_os_device_parameters.
425 kes Report open error in mount.c
426 kes Remove all .exe files from the installer directory on make clean.
428 kes Start adding back removed code.
429 kes Back out a number of changes because backups to tape crash my
431 kes Remove the inetd code from the File daemon.
433 kes Add -c option to pg_dump so that it initializes tables when
435 kes Fix FirstWritten time on Volume to be obtained from SD so that
436 it is the actual time the volume was first written.
437 kes Minor Makefile changes.
438 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
439 ebl Add yes keyword to prune/purge command
441 kes Correct a test in block.c that prevented restore of a DVD from
442 looking at the last part in the spool directory.
443 kes Make some error messages clearer mostly by using the word DVD
444 in the message. Improve infor message in read_record for DVDs.
445 kes Remove DVD kludges in dircmd.c label/relabel.
446 kes Move the dvd relabel code from dircmd.c into
447 write_new_volume_label_to_dvd() adding a relabel argument.
448 kes Rewrite the truncate_dvd() code to be much simpler and
449 more logical. First blow away any spool part, then create a
450 new empty part and write to the DVD.
451 kes Rewrite the can_write_on_non_blank_dvd() code making it
452 only ensure that no valid data is on the DVD -- i.e. it
455 kes Minor Makefile fixes.
456 kes Put attach_dcr_to_dev in a subroutine.
457 kes Make attaching/detaching to/from a device use a flag and
458 only detach if actually attached.
459 kes Add dvd-simulator.in to scripts directory and add to configure.
460 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
461 This could be a cause of a number of drive reservation problems.
462 Note, this code is now in attach_dcr_to_dev().
463 kes Suppress doing Volume updates if it is a system job. This should
464 prevent the DVD label blocking.
465 kes Clear the freespace ok flag in a couple of strategic places.
467 kes Put removing zero sized spool part file in subroutine and
468 call from release_device().
469 kes Add Richard's patch for relabel to dircmd.c, but save and restore
471 kes Rework a lot of subroutines in dev.c to take dcr as an
472 argument. This is done to eliminate the usage of attached_dcrs
474 kes Change truncated_dvd to blank_dvd, which seems more suitable.
475 kes Apply most of Richard Mortimer's truncate patch.
476 kes Create lseek() method for DEVICE that takes dcr as an
477 argument. This is to eliminate the use of attached_dcrs in
478 lseek(). The calls to lseek_dev() must still be changed.
480 kes Apply Richard Mortimer's patches for printing an error
481 message in btape when a DVD is used, and to initialize traceback.
482 kes Added error message to btape when trying to access a file.
483 kes Move prototype of update_slots() to protos.h.
485 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
486 and FDJobStatus to the Director Python variables.
487 kes Make sure valid argument passed to str_to_utime() where Arno
489 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
490 I.e. part of two different patches.
492 kes Modify disk changer to simulate some of the error conditions
494 kes Make sure the close() call in the SD tools is just before the
496 kes Implement dir_get_volume_info() in bls using the patch from
497 Richard Mortimer but call find_num_dvd_parts().
498 kes Implement find_num_dvd_parts() that mounts and scans a DVD
499 and counts the parts.
500 kes Move the omode code in open_dvd() up so that the cannot
501 write on blank disk can check can be bypassed for read mode.
504 kes Disable normal data spooling for DVD writing which uses
505 a different spooling mechanism.
506 kes Apply patch from Richard Mortimer to ensure that the number
507 of DVD parts is correctly updated.
508 rbn Save installer details log in the Bacula directory as
510 rbn Add installer generation of client and storage templates
511 suitable for @inclusion on the director.
512 rbn Mark previously installed Win32 components read-only since
513 deselection doesn't do anything.
515 Version 1.39.22 beta released:
517 kes Fix logic error in handling error return from mtx-changer
519 kes Make status from SD aware of -1 (unknown) Slot status.
520 kes At Eric's suggestion make both the 'slots' and 'drive' commands
521 to the Storage daemon work even if the drive is busy.
522 kes Make two separate Win32 menu links for starting bconsole and
523 wx-console in winbacula.nsi
524 kes Apply DVD part_spooled patch from Richard Mortimer
525 richm@oldelvet.org.uk
526 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
527 rbn Fixed problems migrating settings from previous releases in
528 Win32 installer. Add Readme.txt with an option to show it on
529 the installer Finish page.
531 kes Use get_catalog_resource() to open catalog database
532 to ensure that ACLs are respected and that user is
533 correctly prompted for database.
534 kes Integrate multiple console/director patch from
535 Carsten Paeth calle@calle.in-berlin.de
536 ebl Add character substitution in Job/JobDefs WriteBootStrap.
537 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
538 kes Apply patch supplied in bug #656 to pass priority field
539 in the run dialog to the Director in gnome console
540 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
541 this will fix bug #627 where Bacula eventually gets
542 confused about what Volume it wants.
543 kes Add a new close_part() class in the SD to save the device
544 state around open/close_part/open for DVD writing. This
545 should fix the num_dvd_parts getting zeroed as reported by
547 kes Apply patch from Richard Mortimer that correct edit code
548 for debug output of st_size.
549 ebl Add support of encrypted data stream to bscan.
550 display data_len instead of data content (may be binary)
552 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
553 bcopy. Fixes bug #669 reported by Eric.
554 kes Fix incorrect number of arguments in SQL statement in
555 sql_get.c as reported by Eric.
557 kes Update examples directory.
558 kes Remove unused variable in winservice.cpp
559 kes Make Win32 make command build installer.
560 rbn Add new Install Type page, used to select between Automatic
561 and Custom installs. Automatic installs only prompt for
562 configuration items that can't be reasonably defaulted.
563 rbn Added Bacula logo to page headers.
564 rbn Added Upgrade support
565 - Configuration and component selection are migrated from
567 - Configuration of upgraded components is preserved and
569 - Configuration of new components is handled according to
570 the Automatic / Custom selection.
571 - Component selection is defaulted to previously selected
573 rbn Installation of Server components is disabled on
574 Windows 95, 98 and ME.
575 rbn Added URLs for support, info and upgrades to Bacula entry
576 in Add/Remove Programs.
577 rbn Added Version info to Bacula entry in Add/Remove Programs.
579 kes Correct dvd code that breaks tape labeling.
580 kes Implement Enabled on update slots.
582 kes When doing a label, pass the VolBytes back to the Director,
583 which puts it in the catalog.
584 kes Print an error message if the user attempts to prune an
586 kes Need to start using %ld when sscanfing 32 bit values.
588 kes Correct the counting of VolCatBytes for DVDs.
589 kes Add code to mount.c to require that VolCatBytes corresponds to
590 what is actually found when doing an append.
591 kes Update freespace only after writing on the DVD.
592 kes Remove code that blows away the current part in the spool file.
594 kes Apply new dvd-handler patch from Richard Mortimer.
595 kes Tweak so that debug level 20 shows only DVD commands.
596 kes Correct spooled_part flag in dev.c close() so that it is cleared
597 when the spool file is deleted or does not exist.
598 kes Print part number in read_records when eof hit (restore).
599 rbn Installer default changed to start services on new install.
601 kes Make find with no args in tree restore return error rather than
602 stopping the selection. Fixes bug #665
603 kes Rework DVD writing to ensure that the last part is written
604 on open_next_part when dealing with a spool file.
605 kes Correct the lseek_dev() routine to handle end point correctly
606 (bug introduced by me).
607 kes Allow part number to exceed num_dvd_parts in lseek_dev().
608 rbn Change make_session_key on Windows to use WIN32 APIs to produce
610 rbn Add new tool scsilist.exe which displays the changer, tape and
611 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
612 to add them to bacula-sd.conf.
614 kes Apply dvd-handler patch from Richard Mortimer.
615 kes Apply dvd error check patch from Richard Mortimer.
616 kes Apply bpipe race patch from Richard Mortimer.
617 kes Rework how DVD labels are handled and set append only
618 when part > num_dvd_parts.
620 kes Rework many features of DVD writing and reading. Added many error
621 messages. Most importantly changed part to represent the current
622 part number base zero. This makes current DVD writing incompatible
623 with previous version.
625 kes Add host:port to connect failure messages to FD and SD from Dir.
626 kes Add WhereACL to console ACL list. If nothing is specified, only
627 the default is permitted for restore. Otherwise, *all* allows any
628 path, or you can specify permitted paths. This should allow control
629 over where users can restore files. This is untested.
630 kes Modified message to add a ? (as in loaded?) when querying the autochanger
631 for what Slot is loaded.
632 kes Fixed the use of Slot, so that is more correctly maintained, thus
633 eliminating unneeded duplicate calls to determine what Slot is loaded.
635 kes Install man pages with 'make install'
636 kes wx-console crashes because of differences between Bacula and wxWidgets
637 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
639 kes correct improper indenting in wx-console/console_conf.c
640 kes update wx-console header copyrights
641 kes Fix bug #658 where wx-console mangles file/directory names containing
644 kes Add Media.Enabled flag to client backups for dotcmds.c
645 kes Enforce Media.Enabled=1 for a current restore to work.
646 kes Require restore case 3 to have sqlquery permission to work.
647 kes Remove obsolete del_MAC sql command.
648 kes Ensure that bscan creates Volumes with Enabled=1.
650 Version 1.39.20 beta released:
652 kes Correct missing Client table reference in SQL pointed out by
655 kes Fix Win32 build (new entrypoint, start baculafd).
657 kes Add -n option to bconsole to turn off conio.
658 kes Print JobIds to be migrated in Job Report.
659 kes Add additional user supplied notes to the messages part of
660 bacula-dir.conf concerning multiple email addresses.
661 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
662 kes Add more recent Feature requests to Projects file.
664 kes Apply Maritn's fix to src/win32/Makefile.
665 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
666 kes Implement pruning for Migration and migrated jobs.
667 kes Implement PoolOccupancy migration.
668 kes Implement PoolTime migration.
670 kes If doing a mount, look for a slot, and if specified pass it to
671 the SD so that it can load the autochanger.
672 kes Return DVD=1 flag if a label command is done to a DVD. This
673 permits setting VolParts to 1.
674 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
675 rework ua_label code based on DVD media type to use DVD flag returned.
677 kes Eliminate some compile warnings in dird_conf.c
678 kes Format the bytes field in the terminated jobs part of the status
679 command for the three daemons with suffixes to reduce print size
680 of backup bytes. Suggested by a user.
681 kes When not descending into a directory, print the File= name that
682 triggered it -- makes why not descending a bit clearer.
683 kes Do not unload autochanger when doing a list command -- basic code
684 from Eric Bollengier.
686 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
687 to build-depkgs-mingw32. It now handles two options -h to display
688 help and -C to reextract the source and apply the patches. The -C
689 option is useful for updating the source after new patches are
691 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
692 This allows updating to new versions without having to modify the
693 script and makes it easier to figure out which packages and which
695 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
696 as build-depkgs-mingw32 except they are built using Microsoft Visual C
697 and placed in the depkgs-msvc directory. There is also an
698 External-msvc file to describe the packages.
700 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
702 kes Fix bug #462 incorrect error message printed when client script called
703 from File= was not found.
704 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
705 do a rewind on Solaris when no tape is in the drive (Solaris does not
706 have the detailed errno found on Linux). Added Solaris specific code.
707 Note, this may apply to other OSes as well.
709 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
710 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
711 fix bug 648 - update sqlite script patches, lock out gnome2console
712 builds for platforms with gtk+ < 2.4.
713 Updated build_rpm.sh - add remote source directory, add switch for
714 signing, refine file names.
715 Updated spec file again for Mandriva build as they have this curious
716 custom of silently converting all manpages to bzip2 format just before
717 the final packaging step.
719 rbn Fixed the Windows Makefiles so that they won't accidentally try and
720 pickup binaries for the Unix build. This allows both the Unix
721 build and the Windows build to be built in the same tree without
722 interfering with each other.
723 rbn Fixed error handling and cleaned up mtx-changer.cmd.
724 rbn Added the rest of the database scripts. These are installed but are
725 not yet edited for variable replacement.
726 rbn Broke out the cats functionality from bacula.dll and put into new
727 separate dlls for each database type. At installation time the
728 correct one is copied to bacula_cats.dll.
729 rbn Eliminate the need to install the mysql.dll on client only builds.
730 rbn Moved dird/sql_cmds.c into the cats directory so all the database
731 specific #ifdefs were in the cats directory.
732 rbn Added a new sql_cmds.h with all the declarations for the variables
733 exported from sql_cmds.c.
734 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
735 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
737 kes Correct improperly formatted list command output reported by Dan.
739 kes Correct despool time calculation.
741 kes Remove previous changes to compat.cpp as they create problems.
742 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
743 kes Attempt to fix problems with the msg_queue crashing on Solaris
744 when Bacula is terminating, but problems remain.
745 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
746 name editing problems with too many \\?\es.
747 kes Fix some Bacula source code style problems in compat.cpp.
748 kes Add debug code to compat.cpp and convert non-Bacula debug code
751 kes Change the name of the technical notes file from kes-1.39 to
752 technotes-1.39. Prefix my messages with 'kes '.
753 kes Allow dequeue_messages() to be called twice. Should fix bug
755 kes Add Job type to bscan Job information output.
757 kes Update copyright date in program files, and for the most part
759 kes Implement %q in bsnprintf.c apparently I forgot it.
761 kes Make disk-changer sed command compatible with FreeBSD.
762 kes Make a first cut at a ReleaseNotes and ChangeLog for a
764 kes Make make clean descend into the src/win32 directory.
765 kes Fix some #ifdefing so that Solaris and FreeBSD compile
766 sys/stat.h was turned off.
767 kes Use suffix editing for new transfer rate messages.
768 kes Attempt to come up with a workaround which seems to be an OS
769 bug where write() returns EBUSY. IMO this should not happen.
770 It triggered in truncatebug test. The workaround retries using
772 kes Eliminate a strerror() call in a class method that failed with
774 kes Use rm -rf rather than rmdir to delete the src/win32/release
775 directory during make clean.
777 kes Make bscan ignore ACL streams.
778 kes Update projects files with new Feature Requests.
779 kes Generate current English and French manuals and upload
781 kes Update the home page to include the new British/French flags to
782 switch between translations. Work done by Alexandre Baron.
783 kes Make disk-changer script print an error message if the changer
784 directory is not defined.
785 kes Create a generic DB routine for getting an int (32/64 bit) from
787 kes Add more migration code.
788 kes Add a few more files to .cvsignore here and there.
789 kes Minor fixes for SD write rate and despooling rate.
790 kes Turn off new test code in src/console.c
794 kes Incremented the version number to signify that all of Robert's code
795 for Win32 that was in the branch is now integrated into the HEAD,
796 and that Eric has submitted code that we hope will provide limited
797 backward compatibility with 1.38 file daemons (more testing to be
799 kes I rationalized a few of the names of the variables (mainly jcr names)
800 that are used during migration as keeping three different jcrs at the
801 same time clear in ones head is not easy.
805 eb Tweak new runscript feature to work with 1.38.x FDs.
806 eb Correct crypto.c to fix segfault when restoring an encrypted stream
807 on fd which don't use rsa keys.
808 eb Add yes/no English keywords on localized yes/no questions.
810 kes Several important commits from Robert Nelson for code cleanup and
812 kes Modify console.c so that when conio is enabled, it converts \n to
813 \n\r before outputting to the console. Hopefully this will fix
814 the problems with expect in Perl that Eric saw.
816 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
818 kes Add Comment field to llist of a volume.
819 kes Allow true/false in some yes/no questions.
820 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
821 kes Remove a few /n's when scanning commands from another daemon. This
822 permits adding additional fields later.
823 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
824 kes Update README.mingw
826 kes Tweak authentication to work with 1.38.x FDs.
827 kes Tweak catalog make scripts.
828 kes Fix catalog upgrade scripts so that they work.
829 kes Correct despooling debug code to eliminate race condition.
831 kes Add additional fields as specified by Arno to LocationLog.
832 kes Add comment field to the Media record.
833 kes Add Time field to the Log record.
834 kes Correct migration SQL (thanks to Bill Moran) so that it
835 runs with PostgreSQL also.
836 kes Add spooling/despooling info in status output of SD.
838 kes Spend a lot of time integrating mkcdrec with the rescue disk.
839 kes Add VOLMGMT message class for volume management messages (none yet).
840 kes Add CATALOG as a destination. It goes into the LOG table.
841 kes Implement the Log table in the DB.
842 kes Implement the Location Log table in the DB (for user use).
843 kes At Eric's request add a run_scripts() just after blast_data in
846 kes Add Enabled column to Location, correct some typos in DB schemas.
847 kes Correct bug I introduced into RunScripts enum.
848 kes Add log table to Catalog
849 kes Purge original job migrated if the migration terminates normally.
850 kes Cleanup purging of files/jobs so that it is done only in a
852 kes Add new VOLMGMT message class.
853 kes Add Catalog message destination (user conf code remains to be written).
855 kes Modify read_record and friends to properly deal with migration
857 kes Update debug code in read_record.
859 ======================= Warning ==========================
860 Separate read and write storage in Jobs in the Director. This
861 is a major rewrite of some of the low level code and hence has
862 a high probability of introducing bugs.
863 ==========================================================
865 kes Move the job init code up to *before* the job is put into
866 the job queue (resource allocation queue). This permits the
867 job to establish whether it will read or write or do both.
868 kes Add name() methods to all the resource classes.
869 kes Implement separate read and write storage resource
870 allocation/deallocation in jobq.c
872 ======================= Warning ==========================
873 Implemented new method of getting the default Storage from the Media
874 record rather than from the MediaType for restore. As a fall
875 back, if no Storage is defined, use the MediaType. This
876 eliminates most all prompts if there are multiple MediaTypes
877 used. This is an important and fundamental change.
878 ==========================================================
880 kes Add more detail (Storage, Device) to list of volumes printed
882 kes More code in migrate. In particular start multiple jobs if
884 kes Probably overkill, but ensure that the bsr is unique even within a
886 kes Rework bsys.c drop() so that it now should work as expected.
887 kes Update a bunch of old copyrights -kes particularly in .h files.
888 kes Remove src/lib/bshm.c/h
892 ======================= Warning ==========================
893 All hash codes in the database are now kept in world
894 compatible base64 format (no = filling). This means that
895 all FileSets will be updated and if you are running
896 verify jobs, you must do an InitCatalog.
897 Authentication uses the new algorithm, but should be
898 backward compatible with 1.38.x
899 ===========================================================
901 kes Modify the authentication routines so that the 1.39.15 Director
902 always runs with the compatible binary to base64 code (same as
903 the rest of the world). It will however detect if an SD or
904 FD is running the old code and if that is the case, will use
905 the old algorithm for authentication. However, all consoles must
906 use the compatible algorithm, and all data entered into the database
907 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
908 use the compatible algorithm.
909 kes Rename the cram_md5 routine names to be slightly more appropriate
910 to what they are doing (challenge and respond).
911 kes Robert committed his #ifdef and header cleanup.
913 kes Fix a compiler warning in files/backup.c
914 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
916 kes Robert committed his low impact changes.
917 kes I removed a size_t from the jcr.h definition.
918 kes Update the tape regression scripts (still to be tested).
919 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
920 kes Require done or quit to exit from in memory tree restore.
922 kes Write install/uninstall of new manpages. There are now a
923 pile of man pages. Some of which need a lot of work.
925 ======================= Warning ==========================
926 The --mandir ./configure option now points to the top level
927 man directory. The man files will be installed under
928 mandir/man8 and mandir/man1 as appropriate.
929 ==========================================================
931 kes Add complete text of GPL to LICENSE.
932 kes Implement job report that indicates where Storage and Pool
933 came from -kes with overrides and Pool storage and NextPool,
934 it is all very complicated.
935 kes Create a few common subroutines for backup.c and migrate.c
936 kes Eliminate warning messages from tray-monitor.c
938 kes Apply fix for scheduler for missing unlock_jobs().
939 kes Clean out autoconf caches before rebuilding configure
940 kes Fix the FreeBSD pthreads lib define updated by Dan.
941 kes Add missing semicolon in src/console/console.c
942 kes Add Robert's enhanced version of build-win32-cross-tools
943 as well as his patch file.
944 kes Note, the new gcc options are likely to break building of
945 wx-console or the tray-monitor ...
947 kes Implement Robert's suggestion to suppress printing compile lines.
948 kes Detect GCC correctly (I hope)
949 kes If using GCC (actually g++) add the following compiler flags
950 -fno-strict-aliasing -fno-exceptions -fno-rtti
952 ===================== Warning =============================
953 Turn on new bsnprintf() code. This could cause print output
955 ===========================================================
957 kes Fix crypto when not using openssl. I previously overlooked this.
958 kes Eliminate crypto type punning problems by eliminating void * and
959 using uint8_t * instead.
960 kes Harden authentication failure in FD by single threading errors
961 and forcing a 6 second wait.
963 ===================== Warning =============================
964 Removed 'Accept Any Volume' directive.
965 ===========================================================
967 kes Major cleanup and simplification of regress using shell functions
968 (more tests to be converted to new format)
969 kes Add detection of 64 bit Irix as indicated by user.
970 kes Increment catalog database id from 9 to 10.
971 kes Add a few of the new database fields to the various C++
973 kes Implement code to fill in the most important new fields (e.g.
975 kes Ensure that most of the new fields are in create/get/insert/update.
976 More work to be done.
978 kes Update some very old licenses in src/cats.
979 kes Modify the database format for handling Migration jobs:
980 Add PriorJobId, RealEndTime to Job table
982 Remove Stripe from JobMedia record (not used, wasting space)
983 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
984 Add Cost to Location table.
985 kes Delete mac_record subroutines.
986 kes Add new table values to create/update/get routines as appropriate.
987 kes Update the update_tables and make_tables scripts.
988 kes Make a first cut in using a union where multiple pointers (actually
989 pointers to pointers) are stored.
990 kes Make some changes to base64.c suggested by Robert and others and add
991 a small amount of documentation.
992 kes Add some changes suggested by Peter for Solaris (bregex...)
993 kes Make runscript.h always built because it needs to be pulled into
994 more places. In particular its RES was left out of a union.
995 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
996 This makes it slightly easier to detect uninitialized variables.
998 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
999 sometimes creates install problems.
1000 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
1001 Nelson's code. More to do.
1002 kes Convert a few store_bit to store_bool in filed_conf.c.
1003 kes DVD tweak to block.c as supplied by Uwe Muessel.
1005 kes Modify configure.in to check for typeof().
1006 kes In findlib/attribs.c use typeof instead of templates if possible.
1008 kes Implement partial error messages for src/filed/acl.c
1009 kes Fix return code to fail when doing update barcodes and
1010 Pool resource is not found. This previously caused Volumes
1011 to be labeled as cleaning tapes.
1012 kes Small updates to projects.
1014 kes Add Eric Bollengier patch for new RunScript directive. It breaks
1015 compatibility between dird and fd.
1017 kes Prevent DVD code from rewriting label if the device cannot be
1019 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1020 fix Debian build bug.
1021 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1022 kes Integrate manpages contributed by Jose Luis.
1023 kes Update projects file.
1024 kes Add manpages Makefile.in to configure.in
1025 kes Remove installation of bacula.8 in scripts directory.
1027 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1029 O_NOATIME is a open() flag which makes it possible to read a file without
1030 updating the inode atime (and also without the inode ctime update which
1031 happens if you try to set the atime back to its previous value). It also
1032 prevents a race condition when two programs are reading the same file, but
1033 only one does not want to change the atime. It's most useful for backup
1034 programs and file integrity checkers (and bacula can fit on both
1037 Recent versions of the Linux kernel and glibc have support for it (the
1038 glibc support being mostly copying the O_NOATIME definition to
1039 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1040 it does nothing (since the kernel ignores unknown flags).
1042 If the kernel has support for it, trying to use it either works, fails
1043 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1044 are not either the owner of the file or root). A simple way to prevent the
1045 failure is to open the file without the flag and set it later with
1046 fcntl(F_SETFL), ignoring any EPERM errors.
1047 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1048 of restarted jobs to complete (due to a destroyed pthreads conditional
1049 variable used by the message thread).
1050 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1052 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1053 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1054 colons in query.sql file.
1055 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1056 not to create orphans.
1057 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1058 in restore long listing.
1059 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1060 of incorrect MarkedId.
1061 kes Apply patch from adioso bug #616 to correct text in manual (replace
1062 Director with File daemon).
1063 kes Rework a few of the zlib changes so that they build properly.
1066 kes Move DIR 'run' command to SD before starting the message thread
1067 as suggested by Cristopher Hull to avoid a race deadlock from
1068 two threads using the bsock structure.
1069 kes Modify LICENSE to correct some problems pointed out by Debian.
1071 kes Correct EOF with no \n lex.c problem.
1072 kes Tweak compat.h compat.cpp and merge with apcupsd
1073 kes Add additional INFO messages if autochanger cannot be used.
1076 kes Simplify Win32 Makefile
1077 kes Correct count of buffers/bytes used by smartall.c
1078 kes Updated compat.h after porting apcupsd to MinGW.
1080 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1081 started adding Makefile ...
1082 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1084 kes Reloading a bad configuration file doesn't kill director any more.
1085 Thanks to fix from Eric Bollengier.
1087 kes Fix problem of accents with new Win32 code.
1088 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1089 works in the MinGW build with the exception that there
1090 is a problem with accented characters -kes i.e. there is
1091 some mapping problem with wide characters.
1092 kes The code no longer compiles with Microsoft VC++.
1094 kes Start implementing Christopher's St.Bernard code.
1095 kes Add Christopher's mods for opening files.
1096 kes Strip \r \n from Win32 error messages (Christopher)
1097 kes Add more info about Win32 system if unknown (Christopher)
1098 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1099 kes Fix a number of incorrect strings marked for translation, when
1100 they should not be (e.g. commands).
1101 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1102 Patches supplied by user in bugs #608 and #599.
1103 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1104 listing. This fixes some problems with Win32 printing incorrect
1106 kes Correct the clock shift comm time calculation between the DIR
1107 and the FD. It was added rather than subtracted.
1108 kes Strip all backslashes in filenames to be restored on Win32
1109 machines -kes the names should all be in Unix format, and if
1110 there are any backslashes it is most likely due to an improper
1111 FileSet definition, and the files will not otherwise be
1113 kes Remove lib/regex.c (replaced by bregex.c).
1114 kes Delete src/win32/License.txt
1115 kes Modify installer to install LICENSE
1117 kes Fix bug in build-win32-cross-tools script reported by Howard
1118 kes Implement cross compiled bconsole
1120 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1121 kes Write first cut of README.mingw32
1122 kes Add back ua_label barcode fix from Rufolf Cejka.
1123 kes Integrate the majority of the Mingw cross-tools submission
1124 made by Howard Thomson. Everything compiles, with zlib, openssl,
1125 and VSS turned off. Linking needs a pthreads library ...
1127 kes Add 'Dir Status' button to the gnome console.
1128 kes More work on migration.
1129 kes Restore non-compatible base64 coding to permit compatibility.
1130 kes Display heap stats in Storage daemon without debug level.
1132 kes Integrate most of the MinGW changes -kes more to do.
1134 kes Implement using pg_config for finding PostgreSQL files.
1135 Fixes bug #600. Patch supplied by user.
1136 kes Remove -t option from mktemp in mtx_changer.in and use
1137 working directory. Fixes bug #578.
1138 kes Update job start time after the any run before job so that
1139 files created by the script are only backed up once. Fixes
1141 kes Strip trailing newline only from filenames entered in
1142 the restore command when reading a file. This permits
1143 the user to enter filenames with trailing spaces. Fixes
1144 bug #549. The user supplied a patch that I modified slightly.
1145 kes Use the most recent time (st_mtime, st_ctime) in the dir
1146 command in restore. This gives the user a better idea of what
1147 the newest file really is. This fixes bug #574. The fix
1148 was suggested by the user.
1149 kes Implement a compatible version of base64. This permits external
1150 programs to duplicate Bacula's base64 algorithm using standard
1151 routines. This fixes bugs #296, and 565. Patch submitted by
1153 ================= Note ========================
1154 Previous Signatures stored in the database are no longer
1155 compatible with this. The main downside is for Verify jobs,
1156 and doing an InitCatalog run will fix the problem. Also, the
1157 authentication between the deamons is changed, so all daemons
1158 must be simultaneously upgraded.
1159 ==============================================
1160 If you don't like this fix, set:
1161 const bool compatible = true;
1163 const bool compatible = false;
1166 kes Ensure that DB signature is never NULL.
1167 kes Ensure that DB table names are not translated.
1168 kes Fix scheduler to handle time skew (eg daylight savings).
1169 kes Fix scheduler to use lock_jobs() to avoid most problems
1170 with reload. Window is now milliseconds.
1172 kes Apply patch from Christopher Hull
1173 kes Allow multiple connections to database with different
1175 kes Invalidate the scheduler when doing a reload. Fixes seg
1176 fault, but still 60 second window.
1177 kes Additional info in Reschedule message.
1178 kes Use set_jcr_job_status() everywhere to prevent loss of
1180 kes Display peer IP in FD if error from connecting DIR.
1181 kes Don't increment file count for DIRBEGIN.
1182 kes Replace illegal characters in Win32 filename by _.
1183 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1184 kes Hash hard link filenames rather than linked list.
1185 kes Fix for security failure in chdir on Win32.
1186 kes Add CreateDirectoryA/W win32 API entry points.
1187 kes Add /silent option to Win32 FD for Install/Remove service.
1188 kes Always print Heap statistics in FD.
1190 kes Remove the -f option from the chown in Makefile.in for more
1192 kes Change setting the group in Makefile.in to use chgrp for
1194 kes Implement a write_store and read_store to replace
1195 dirstore in reserve.c
1196 kes Implement a Bacula read/write lock for Python rather
1197 than using the Python lock to avoid recursive problems.
1198 kes Correct the uninstall directory names in filed/Makefile.in
1199 as reported by a user.
1201 kes Correct some problems with database creation (new tables).
1202 kes Replace a bunch of old 0x%x by %p.
1203 kes Get first cut of Migration with Job selection working.
1205 kes Change store_bit() to store_bool() for the Spooling in
1206 dird_conf.c -kes bug reported by Robert Nelson.
1208 kes Correct Makefile bug found by Dan Langille.
1210 kes Correct Makefile for Solaris /bin/sh
1211 kes Correct mtx-changer.in for Solaris /bin/sh
1212 kes Abort if a conf resource does not have a Name =
1214 kes Change the name of the regex program to bregex.
1215 kes Add the bwild program to the tools directory. It is similar
1216 to the bregex program.
1217 kes Implement create bregex.h and bregex.c in src/lib from the
1218 Python regexp program.
1219 kes Use the new bregex.c to implement Regex expressions on Win32.
1221 kes More work on migration.
1222 kes Implement wild program in tools directory for testing
1223 wild-cards. Almost identical to the regex program.
1224 kes Up port VSS single thread locking code.
1225 kes Replace N_(..) by NT_(...) to inhibit translation of
1227 kes Modify Makefile to change the permissions on Working Directory
1228 to 770 if the directory is created.
1229 kes Do not fail the Makefile if changing the permissions or
1230 owner/group on WorkingDir fails.
1231 kes Remove early selection of Scratch Volumes in the recycling
1233 kes Correct the old recycling algorithm so that Scratch Volumes
1234 are selected when looking for a Volume in the changer.
1235 kes Correct a typo in the Verify SQL reported by Joe Park.
1237 kes Remove automatic case folding on Windows FDs. You must
1238 explictly use the 'Ignore Case = yes' option.
1239 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1240 scratch volume in an Autochanger early in the 'recycling'
1243 kes Make weof() and clrerror() methods of class DEVICE.
1245 kes Tweak license to include Microsoft restrictions.
1246 kes Move mysql.reconnect to after real_connect(). Thanks to
1247 Frank Sweetser for the patch.
1248 kes Disallow a backslash in a File = directive (Windows junk)
1249 unless the string is quoted.
1250 kes Apply Eric's patch to ua_label.c so that daemon protocol
1252 kes Add NT_ definition for strings that should not be translated.
1253 kes Apply NT_() to ua_label.c
1254 kes Remove timed wait for VSS on Win2K3 as it is not yet
1256 kes Correct bacula.in script to reference bacula-ctl-xx in the
1257 sysconfig directory rather than the bin directory.
1259 kes Fix a long standing bug in the bacula start/stop scripts.
1260 kes Attempt to add the new bacula-ctl-* files to the rpm.
1261 kes Switch to using typeof() for list traversing to avoid
1262 as many FC5 g++ compiler warnings as possible.
1264 kes Split the bacula start/start script into four files:
1265 bacula -kes starts and stops calling other scripts
1266 bacula-ctl-dir -kes starts/stops the director
1267 bacula-ctl-fd -kes starts/stops the File daemon
1268 bacula-ctl-sd -kes starts/stops the Storage daemon
1270 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1271 kes Correct editing of JobId from int to int64 in fd_cmds.c
1272 kes Eliminate FileSet name race with bash_spaces() and multiple
1273 threads by bashing in a local.
1274 kes Fix error return from 'use storage' to print a correct error
1275 message rather than nothing.
1276 kes Correct false re-read last block error message when two jobs
1277 are simultaneously writing at the end of a tape.
1278 kes Simplify exit conditions in the reserve.c code to avoid
1279 possible non-release of reservation_lock().
1280 kes Suffle lock order in reserve to avoid deadlock between
1281 reservation lock and device mutex.
1283 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1284 tracking this down for me !!!! as it broke the Win32 build.
1286 kes Integrate addition of line count limitation to bsmtp -l from
1287 Sebastian Stark <stark at tuebingen.mpg.de>
1289 kes Implement regex test program in tools directory.
1290 kes Attempt to fix time problem with bsmtp with foreign langs.
1291 kes Add strip_trailing_newline() submitted by user.
1292 kes Implement regex matching in migrate.c
1294 kes Fix bug #537 to allow arbitrary time to mount a volume for
1295 restore, if polling is turned on.
1296 kes If dir_user or dir-group is specified in ./configure apply it to
1297 the working-dir. Fixes bug #533.
1298 kes If rescheduling a job cancel the previous incarnation with the SD.
1299 Fixes bugs #566 and 557.
1300 kes Fix bug #567 do_message() definition type conflict.
1303 kes Add more jcr methods and make mutex and use_count private.
1304 kes Create lock/unlock methods for jcr.
1305 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1306 records to get to seek position.
1307 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1308 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1309 terminates correctly by doing pthread_kill(). Do not destroy
1310 SD cond wait variable between executions of the job. Use local
1311 mutex for cond variable to avoid blocking jcr chain. Fix poor
1312 use of jcr use count in jobq.c for restarted jobs.
1313 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1314 lib/jcr.c -kes prevents locking the jcr chaing.
1315 kes Apply patch from bug #564, which corrects listing volumes with
1316 multiple autochangers. Apply same fix to next volume list.
1317 kes Fix bug #562 where restore bootstrap file is not unique.
1318 kes More details in implementing David's migration syntax proposal.
1319 kes Save and restore dcr when swapping drives so that if we have
1320 a write dcr it is not lost.
1321 kes Use new routine lock_reservations() to lock the reservations
1322 system, and call it while looking for a volume in askdir.c.
1323 This could possibly fix bug #543.
1324 kes Stop SD command loop if job is canceled.
1327 kes Remove old code from findlib/create_file.c
1328 kes Rename mac.c migrate.c
1329 kes Add user friendly display of VolBytes in job report.
1330 kes Rename target... to previous... to make it a bit easier to
1332 kes Add selection type and selection pattern to Migration (idea
1333 given by David Boyes).
1336 kes The po files should now be current.
1337 kes Fix new sql_use_result() code to properly release the
1338 buffers in all cases.
1339 kes Use the keyword ujobid to mean the unique job id; job or jobname
1340 to mean the Job name given on the Name directive, and jobid to
1341 be the numeric (non-unique) job id.
1342 kes Allow listing by any of the above.
1343 kes Add the user friendly job report code for reporting job elapsed time
1344 and rates with suffexes from John Kodis <kodis at comcast.net>.
1345 kes Add Priority and JobLevel as Python settable items.
1346 kes Use TEMPORARY table creation where the table is created by
1348 kes Add new code submitted by Eric for waiting on specific jobid.
1349 kes Add ACL checking for the dot commands.
1350 kes Fix restore of writable FIFOs.
1351 kes Fix a bug in bpipe where the string was freed too early.
1353 kes Modify the Python class examples to inherit object -kes new way
1354 of defining classes. Patch from Felix Schwarz.
1355 kes Implement jobuid to replace old usage of job in keywords as
1356 suggested by Eric Bollengier.
1357 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1358 wait (wait for all jobs to stop)
1360 wait jobuid=unique id
1362 kes Implement write variables for Python to set Priority (anytime), and
1363 Job Level, only during JobInit event.
1365 kes Fix the block listing bug pointed out by Arno.
1366 kes Update the po files at Eric's request.
1368 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1369 accept time qualifiers.
1370 kes Make catalog respect ACL.
1371 kes Add recycle count to Media record.
1373 Changes to 1.39.6-beta1 24Feb04
1375 kes Add Rudolf Cejka's new rc-chio-changer.
1376 kes Implement pulling Volume from Scratch Pool if the
1377 Volume is in the autochanger.
1378 kes Implement additional command arguments for update Volume.
1382 kes Back port changes to 1.38.5
1383 kes Fix recycle SQL for StorageId.
1384 kes Fix misplaced quote in mtx-changer script.
1386 kes Note. Your database must be updated, or you must create
1387 a new database. I have not yet incremented the database level.
1388 kes Add Location table.
1389 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1391 kes Implement create/get mac record in database for adding extended
1392 Migration data to the job record.
1393 kes Add new MAC table to update/make database scripts.
1394 kes Return Storage name used when getting VolumeNames for a job.
1395 kes Change bsr file keyword Storage to Device, which is more accurate.
1396 kes Ensure that Mac records are pruned/purged.
1397 kes Tweak SD tools to deal with changing media type.
1398 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1399 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1400 that the subroutine can switch devices, and hence dcrs.
1401 kes Modify the multiple MediaType read code to re-use the same
1402 dcr when switching devices. This makes the code much more
1404 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1405 from a table for restore.
1406 kes Add Storage name to VolParams, but it really should be Device.
1408 kes Add disk-changer to scripts directory + configure/Makefile
1409 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1410 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1411 kes Implement new store_bool that stores in a bool.
1412 kes Add true/false to yes/no conf directives.
1413 kes Make first cut at changing appropriate store_yesno to store_bool.
1414 kes Complete implementation of Pool storage devices.
1415 kes Move starting clones to job.c
1416 kes Move create_restore_bootstrap_file() to job.c
1417 kes Make copy_storage() more general to be able to handle
1419 kes Cleanup a lot of migration code for manual running, including
1421 kes Move getting a scratch Volume into a subroutine.
1422 kes Make all places a Volume that is added to a pool to
1424 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1425 kes Fix segfault in restore command when no value specified.
1426 kes Start adding code to handle multiple MediaTypes in restore.
1427 kes Eliminate race condition in getting Volume name for
1428 two drive autochanger.
1429 kes More debug code in autochanger.
1430 kes Add storage keyword to bootstrap file, add parsing.
1431 kes Move slot in bsr file into Volume record as there will be
1432 a different slot for each Volume.
1433 kes Create reserve.h
1435 kes Implement Pool storage overrides.
1437 kes Implement first cut of Migration.
1438 kes Implement mysql_use_result() from patch by Karl Hakimian.
1439 This reduces significantly the memory consumption during
1440 the restore tree building, and hence runs faster too.
1441 kes Implement StorageId patch supplied by user (reggie) in bug
1442 #536. This should permit Bacula to work correctly with two
1444 kes Implement Job listing variations suggested by a user.
1445 kes Move updating bootstrap code in backup.c to subroutine
1446 update_bootstrap_file().
1447 kes Add new job status elapsed time and bytes written user
1448 friendly job report output patch sent by John Kodis
1449 <kodis at comcast.ne>.
1450 kes Implement a storage list in Pools.
1451 kes Separate out setup_job() code from run_job().
1452 kes Get migration working -kes lots of changes in mac.c in both
1454 kes Apply patch from user (Eric Bollengier I think) that fixes a
1455 DIR crash when no arguments are supplied to a dot command.
1456 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1457 kes Fix command arg name->volume in label command of gnome-console.
1458 kes Fix SD acquire.c to release correct DCR by explicitly testing
1459 on the dcr address rather than trying to devine if it is a read
1460 or write dcr. This failed in error conditions when the device was
1464 kes Apply user supplied patch for more readable rate output
1466 kes Continue implementing migration.
1467 kes Implement support for removable filesystems in SD.
1468 kes Ensure that btraceback scripts can be read by anyone.
1469 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1470 kes Correct bug where canceling restore before the FD contacts
1471 the SD causes the drive to be left in read mode.
1472 kes Move ofline_or_rewind into DEVICE::close().
1473 kes Eliminate close_device.
1474 kes Convert several dev subroutines to methods (e.g. bsf,
1476 kes Eliminate force_close_device().
1477 kes Implement Device Type directive in Device resource that
1478 can have values File, Tape, Fifo, DVD, or Prog.
1479 kes Add has_cap() method to Device.
1482 kes Add patch from bug #527 to allow RedHat user to specify
1483 options/user/group for starting each daemon in
1484 /etc/sysconf/bacula.
1486 kes Add two new queries to query.sql provided by Arno. One
1487 list volumes known to the Storage device, and the other
1488 lists volumes possibly needing replacement (error, ...).
1490 kes Add periodic (every 24 hours) garbage collection of memory
1491 pool by releasing free buffers.
1493 kes Correct bug counting sized (for display only) in smartall.c
1494 kes Print FD mempool stats if debug > 0 rather than 5.
1496 kes Make db_lock() mutex error fail the job rather than abort
1497 Bacula. Canceling the job caused the mutex to fail.
1498 kes Correct bug in alist.c that re-allocated the list if the
1499 number of items goes to zero.
1500 kes Move the reservation system thread locking to the top level
1501 so that one job at a time tries all possible drives before
1503 kes Implement a reservation 'fail' message queue that is built
1504 and destroyed on each pass through the reservation system.
1505 These messages are displayed in a 'Jobs waiting to reserve
1506 a drive' list during a 'status storage='. Note, multiple
1507 messages will generally print for each JobId because they
1508 represent the different problems with either the same drive
1509 or different drives. If this output proves too confusing
1510 of voluminous, I will display it only when debug level 1
1511 or greater is enabled in the SD.
1513 kes Add enable/disable job=<job-name>. This command prevents
1514 the specified job from being scheduled. Even when disabled,
1515 the job can be manually started from the console.
1516 kes During 'update slots' clear all InChanger flags where the
1517 StorageId is zero (old Media records).
1519 Beta release 1.38.4:
1521 kes Fix autochanger code to strip leading spaces from returned
1522 slots number. Remove bc from chio-changer.
1523 kes Back port a bit of 1.39 crypto code to reduce diffs.
1524 kes Fix first call to autochanger that missed close()ing the
1525 drive. Put close() just before each run_program(). Fixes
1528 kes Add PoolId to Job record when updating it at job start time.
1530 kes Pull in more code from 1.39 so that there are fewer file
1531 differences (the new ua_dotcmds.c, base64.h, crypto.h
1532 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1533 util.c. Aside from ua_dotcmds.c these are mostly crypto
1535 kes Implement new method of walking the jcr chain. The
1536 incr/dec of the use_count is done within the walking
1537 routines. This should prevent a jcr from being freed
1538 from under the walk routines.
1543 kes Start implementing Verify list output.
1544 kes Move the suitable_drive flag to a better place to prevent
1545 premature termination of the reservation if all drives
1546 are busy -kes should fix Arno's diff/inc pool failures.
1548 kes Add mutex to single thread VSS code in Win32.
1550 kes Simplify code in askdir.c that waits for creating an appendable
1551 volume so that it can handle multiple returns from the wait
1553 kes Modify the wait code to permit multiple returns.
1554 kes Return a zero when 'autochanger drives' is called and
1555 it is not an autochanger.
1556 kes Make rewind_dev() a method taking a DCR as an argument.
1557 This permits closing and reopening the drive if the
1558 rewind fails as happens if the drive was loaded while the
1559 file descriptor was open. This refreshes the file descriptor.
1560 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1561 if the device is open or not. This should eliminate
1563 kes Return error if reserve cannot find at least one suitable device.
1564 kes Make wait_for_sysop() return correct state information.
1565 kes Fix Win32 state file problem. write was not using compat
1566 code. This should fix bug #500.
1568 kes Modify gui on command to set only GUI mode and not batch.
1569 kes Modify .messages command to always print messages regardless
1571 kes If GUI mode is on, suppress automatic printing of
1573 kes Delete old bnet packet code.
1574 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1575 wx-console. -kes not implemented because bconsole must be updated.
1576 kes Modify restore command in wx-console to set gui on and to use
1577 only .messages instead of messages. Hopefully this fixes bug
1579 kes Fix seg fault in exit of acquire when canceling a job --
1580 reported by Wolfgang Denk
1581 kes Pull in latest reservation system changes from 1.38
1582 kes Make .messages command always print messages regardless
1583 of the automessages flag.
1585 kes Fix seg fault if user labels a drive directory bug #513
1586 kes Remove quotes around Version as it breaks things.
1588 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1589 kes Apply sparse code fix for raw drives and fifos. Bug 506
1590 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1592 kes Correct reservation system to do a last ditch try
1593 for any mounted volume, then anyone anywhere.
1594 kes Add quotes around table Version because of
1595 error in MySQL 4.1.15 -kes bug report submitted.
1596 kes Correct some minor problems with btape in the fill
1598 kes Updates to ssh-tunnel from Joshua Kugler.
1599 kes Added a report.pl program from Jonas Bjorklund.
1600 kes Simplify the O_NONBLOCK open() code for tape drives,
1601 and always open nonblocking.
1602 kes Do not wait for open() if EIO returned (shouldn't happen).
1603 kes Eliminate 3 argument to tape open().
1604 kes Correct the slot # edited in the 3995 Bad autochanger unload
1606 kes With -S on bscan (show progress) do not divide by zero.
1608 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1609 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1610 kes Remove unused code in wait_for_device.
1611 kes Make wait_for_device() always return after 60 seconds of wait.
1615 kes Add stubs for non-crypto build.
1617 kes Use localhost if no network configured
1619 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1620 kes Remove debug print.
1621 kes Add bail_out in error during state file reading.
1623 kes Merge changes made to 1.38.3 into HEAD
1624 kes Add stubs for pygtk-console code
1625 kes Create Makefile.in for pygtk-console code
1627 kes Merge updates into 1.38 branch
1628 kes Update specs to include mysql4 define.
1629 kes Fix when attributes are sent, must be after binit().
1630 kes Stop read_record() if status not ok in second loop.
1631 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1632 and partial records in read_record(). This allows bscan
1633 to get FileIndex at EOT correct.
1634 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1636 kes Fix Win32 built to work with new crypto code.
1637 kes Apply patch supplied by user (slightly modified) to fix
1638 correct detection of holes in block devices and FIFOs.
1640 kes Apply patch supplied by user (slightly modified)
1641 to fix SD hang with multiple pools and bad client
1642 IP. Fixes bug # 508.
1644 kes Add nagios plugin to the examples directory. Submitted by
1646 kes Remove warning message about multiple saves of hardlinked files
1647 from find_one.c as it can generate too many warning messages.
1648 kes Modify most restore error messages to be queued so that they
1649 appear at the end of the job rather than mixted with the restore
1650 listing where they could be 'lost'.
1652 kes Reset timeout values before select() per patch from
1653 Frank Sweetser for problems with non-blocking sockets.
1654 kes Unlink the state file if either reading or writing it gets
1655 errors. Hopefully this will fix Win32 exit problems.
1656 kes Add sanity check in append.c to ensure that dcr is not NULL.
1657 This can happen if multiple drive autochanger SCSI control
1658 channel and drive indicies do not correspond.
1660 kes Get next volume from Scratch pool before creating a volume.
1661 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1662 kes Remove argument from create_bacula_database for SQLite as it
1664 kes Add back index code so that two drive autochangers can get
1666 kes Change a bunch of debug levels to aid debugging autochangers.
1667 kes Fix reservation so that mutexes are properly applied.
1668 kes Rework reservation algorithm so that two drives can be used
1671 kes Landon merged his data encription changes into the HEAD
1672 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1673 If this patch is applied, the number of days can be specified with
1674 'list nextvol days=xx'
1676 'status dir days=xx'
1677 My use case is to be able to preview the next scheduled job (and the
1678 next tape to be used) on fridays if there are no scheduled jobs during
1682 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1683 kes Fix malformatted bnet error message that caused seg fault
1685 kes Applied user patch to improve README.vc8 in src/win32.
1687 kes Add Migrate, Copy, Archive Job types (some where there)
1688 kes Correct some more editing of JobId's (for 64 bit compatibility).
1689 kes Ensure that StorageId is stored in Media record when ever possible.
1690 kes Add Migration Job to Job.
1691 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1692 Next Pool to Pool resource.
1693 kes Add more code to mac.c (migration archive copy).
1694 kes Change Start Storage daemon job to require read and write storage
1696 kes Pass read storage data to SD as well as write storage data.
1697 kes Remove old code from winservice.cpp
1698 kes Break on error in scan.
1699 kes Fix typo in signal.c
1700 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1701 kes Cleanup how find_device() works.
1702 kes Add read output to Status in SD.
1705 kes Add red-black btree routines
1707 kes Remove abs() in bfile.c so that it compiles on Solaris.
1710 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1711 kes Fix bnet-server bug found on OpenBSD. Bug #486
1712 kes Fix cancel failure bug. Bug #481
1713 kes Fix failure when Pool name has spaces. Bug #487
1714 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1715 kes Fix a couple of free()s in src/filed/acl.c
1716 kes Fix memory overrun in bfile.c in building OS X resource
1717 fork filename. Bug #489
1718 kes Add Pool name to SD status output.
1720 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1721 kes Make sure to set storage before trying to set drive.
1722 kes Add bacula_mail_summary.sh to examples directory. It makes
1723 a single email summary of any number of jobs. Submitted
1725 kes Make sure when we do a mount to unblock the device even
1726 if the drive could not be opened.
1728 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1729 and correct a few minor problems to make it build on Linux.
1731 kes Remove delete of CVS from all Makefiles
1732 kes Fix seg fault when clicking on Add button in wx-console
1733 restore panel. Bug #470.
1734 kes Fix copyright date and URL typo -kes bug #468.
1735 kes Change autostart install for FreeBSD to look for rc.conf
1736 rather than rc.local as suggested fix for bug #466.
1737 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1738 grant on status. Bug #465
1739 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1740 update script. Bug #464
1741 kes Tweak #ifdefing a bit in new Win32 stream code.
1742 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1743 kes Add documentation of performance #defines
projects / bacula / bacula / blob