1 Technical notes on version 1.39
4 Version 1.39.32 released:
6 kes Add Volume name to Forward spacing message.
7 kes Update migration job start time (so it is not zero) to prevent
8 immediate recycling of the job. This *should* fix bug #733.
10 ebl Fix runscript configuration parsing bug.
12 kes Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
13 Remove NLS kludge from baconfig.h. This fixes bug #729.
14 kes Allow seeking on DVD.
15 kes Add additional messages when Job canceled automatically for
16 max run time or max start wait exceeded. This fixes bug #621.
17 kes Update maxruntime-test in regression script to properly test
18 max run time -- from info given in bug #621.
19 kes Simplify automatic cancel code.
20 kes Add check for job_canceled() in FD when contacting SD so that if
21 job is canceled from max runtime, it terminates faster.
23 kes Save and restore volume name in stored/mount.c fixed bug #712
24 where wrong tape was requested in a mount.
25 kes Implement cleaner orphan buffer dumping with buf address.
26 kes Fix orphaned buffer when canceling job waiting on op intervention.
27 kes Update projects file for next vote.
28 kes Implement a fix (more could be done) for bug #728 where a double
29 EOF is writing on the Volume when spooling is enabled and the
30 connection with the FD fails (FD crash, comm error).
31 kes Disable attempting to autolabel when polling and device is not
32 a tape. This fixes bug #730 where polling with a removable disk
33 not mounted caused lots of new Volumes to be created then marked
36 kes Enable VSS by default.
38 Version 1.39.30 released:
40 kes Complete hopefully the last of the copyright transfer changes.
41 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
42 that migration writing to multiple volumes doesn't mess up reading
43 Volumes. This should fix bug #720 -- multivol migration fails.
44 kes Make migration SQL look only for Type='B' jobs to migrate. This should
45 fix bug #724 jobs getting migrated twice.
46 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
47 kes Implement dev->clear_cap() and dev->set_cap() methods.
48 kes Turn off disk seeking on restore for DVDs since I am not 100%
51 kes Implement code that should properly set that a job was migrated,
52 if the migration was successful even if there were no file to
54 kes Apply Richard's patch to fix building or filed/restore.c without
56 kes Ensure that at least one block is written by the SD even if the
57 FD dies or fails -- should fix bug #728.
58 kes Convert stored/record.c ASSERT into a soft fail if the length of
59 a record is too insanely long. This should fix bug #???
61 kes Fix automatic labeling of File volumes, which was broken by new
62 removable device code.
64 kes Remove typedef uLong for HP in baconfig.h. It broke things.
65 lf Fix job byte reporting -- the digest code runs in verify.c and
66 increases this value. The better solution is to digest the
67 stream as we receive it, thus removing the need to re-read
68 from disk at all, but that requires more extensive and
69 potentially destabilizing changes.
70 lf This commit fixes backup and restore of HFS+ resource forks.
71 lf Add a long-missing 'break' statement in HFS+ attribute
72 handling that resulted in restore failures.
74 ebl Fix runscript to always execute command after all job type.
76 Version 1.39.30 released:
78 kes Mark build-depkgs-mingw3 executable in configure process.
79 kes Update autoconf/config.h.in to include LOCALEDIR
80 kes Undefine NLS settings for wxWidgets as there is a conflict with
81 their way of doing things.
82 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
83 kes Change a bunch of ->hdr.name to ->name()
84 kes Straighten out handling of read and write pools for Migration, including
85 getting the code in the proper order.
86 kes Improve migration error messages and debug output.
87 kes Shorten code path in migration if nothing found to do.
88 kes Implement read/write pool in migration job report.
89 kes Move ua_run.c select_job_level code into a subroutine (readability).
90 kes Move ua_run.c display_job_parameters into a subroutine.
91 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
92 restore dependent on a valid catalog containing the Volume name.
94 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
95 make it easier for the user to change.
96 kes Fail any backup job that tries to use encryption and sparse options.
97 Hopefully this is a temporary change.
98 kes Correct the EndJob return string for non-backup jobs.
99 kes Review the encryption restore code.
100 kes Implement a new encryption regression test with compression.
101 kes Modify migrate not to fail if nothing found to migrate.
102 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
103 because they were not always set correctly.
105 kes Update configure.in to include python 2.5 search.
106 kes Back out unwanted migration change reported by Richard Mortimer.
108 kes Make migration with no files to migrate set normal termination.
109 kes Change message when job manually started to say Job queued. ...
110 kes Add job report indication of whether or not VSS and Encryption were
112 kes Modify sparseBlock variable name to make the code clearer.
113 kes Add more sparse tests to regress using gigaslam sparse file
115 kes Enable data encryption code.
116 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
117 only two blocks -- i.e. it is a real sparse file.
119 kes Enable disk seeking on restore.
120 kes Implement the SD 'Block Positioning = yes|no' directive. This
121 allows the user to turn off block level seeking, but restores
123 kes Change the word illegal to read invalid in a few places.
124 kes Fix Win32 build, which broke when I added parse_args_only in
125 lib. I'm not sure I got the entry point right for msvc.
126 kes Turn off data encryption. It can be enabled by defining
127 DATA_ENCRYPTION in src/version.h and recompiling.
128 kes Implement flag to turn off data encryption feature.
129 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
131 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
132 The main problem was that signatures were being generated on blocks
133 of zeros, which is unnecessary.
135 kes Fix scanner (next_arg) to handle leading double quote correctly.
136 kes Modify cd command in restore tree to look at full argument without
137 keywords. This fixes bug #716.
139 kes Do not update Migrated Job type if migration does not terminate
140 normally. This fixes bug #719.
141 kes Update ReleaseNotes
142 kes Purge Job records from the catalog for Migration. This was
143 not properly done previously. This fixes bug #718.
145 kes Initialize msg_type to M_INFO in migration. Pointed out by
147 kes Add some fflush() statements for debug output. This should not
148 really be necessary and defeats buffering but users continue
151 kes More copyright changes.
152 kes Make sure we don't detach from the despool read device since it
153 is a temporary structure where the condition variables are not
154 initialized. Bug #711.
156 kes Add Bacula version+date to Client record. This is a very minor
157 security problem in that passing the version facilitates a hacker's
158 life, but it will make support easier.
159 kes Implement fixes to make disk seeking work. Currently turned
160 off in version.h pending reserch on what problems it will cause
161 because of the previous bsnprinf() sign extension bug.
163 kes Add Landon's refactor of restore Feature request to the
165 kes Tweak debug levels and messages for examining the disk
168 kes Cleanup some of the error termination code in migration.
169 kes Separate read/write source strings to keep track of where
170 storage devices are used in a job.
171 kes Implement a new method of keeping track of which storage
172 device is used in a Job. USTORE keeps both a pointer to the
173 resource and to the source string.
174 kes Modify all code to use new storage set subroutines in job.c
175 kes Modify migrate.c so that the definitive selection of the storage
176 resource is done in the do_migration_init() routine prior to
177 the job going into the job queue. This permits accurate
178 deadlock detection (same read and write storage resource).
179 kes Remove bfill from btape (I think it was a left over stub).
181 kes Make sure that the storage for a job is pulled first from
182 the Pool and if not from the Job.
183 kes Ensure that either the Pool or the Job specifies a Storage
186 kes Start applying new FSFE copyright.
188 kes Add additional error messages in acquiring a drive for read.
189 kes Make WritePartAfterJob the default so that the last DVD part
190 always gets written to the DVD by default.
191 kes Add additional error messages in migration.
192 kes Suppress redundant error messages in migration (possibly more to do).
193 kes Apply Martin's fix (updated to 1.39) that takes into account
194 run storage overrides in the Director status display.
195 kes Implement, but turn off the submitted code that sets the EOT
196 model on FreeBSD machines. Turning on this code is too risky at
197 this point in the development.
199 kes Implement unique dbid routine for migration to prevent the same
200 JobId from being migrated twice. This should fix bug #709.
202 kes Apply Jaime Ventura's 'mail on success' patch.
203 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
204 if memory usage gets too big.
205 kes Tweak migration to ensure that read/write devices are different.
207 kes Create an AUTHORS file to list Bacula contributors.
208 kes Add Richard Stallman's four GPL freedoms to LICENSE
209 kes Require the conf file to have a valid NextPool for writing the
212 ebl Enable RecycleCount in catalog.
213 ebl Fix "echo python | bconsole" segfault
215 kes Implement code to pass the MediaId to the SD. The SD then uses
216 this MediaId when creating JobMedia records. This fixes a bug
217 with Migration where the MediaId got set to the second Volume
218 read rather than the write Volume. Possibly (unlikely) fixes
220 kes Remove NextPool from Job resource.
221 kes Edit a few numbers in the restore dialog with commas.
222 kes Note, the DIR<->SD protocol has changed.
224 kes Replace () by {} in configure.in for proper HP configuration.
225 kes Shorten some lines over 80 characters in filed/backup.c
226 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
228 Version 1.39.28 released:
230 kes Change error message 'illegal' to 'invalid' -- bug #707
231 kes Add rather primitive device resource deadlock detection in
232 the job queue handler. It detects the same read and write device
233 for migration and cancels the job.
234 kes Start adding a unique_dbid_hander() routine in migration to avoid
235 duplicate mediaids and duplicate jobids.
236 kes Add patch from bug #708 to permit relative paths such as ../xxx
237 in the restore tree routine.
238 kes Add Eric Bollengier's patch to reduce locking time in the SD after
239 despooling, and thus many jobs finish faster.
240 kes Correct locking order of reservations lock and device mutex in
241 reserve.c -- this should correct Arno's deadlock that occurred
242 when doing mount/unmount at the same time a job is reserving a
245 rbn Fixed problems with encryption when combined with compression
246 or sparse files. Unfortunately this means that all previous
247 encrypted backups can't be restored.
248 rbn Fixed problem in bfgets with Windows and Mac end of lines.
249 rbn Fixed bug in Windows version of close_bpipe() that cause programs
250 like bsmtp() to hang waiting for the pipe to be closed. Fixed
251 binary file type problems in open_bpipe().
252 rbn Fixed a number of bugs in the mysql DB scripts.
254 ebl Fix broken runscript on director. (RunBefore, RunAfter)
255 ebl Use M_ERROR instead of M_FATAL in runscript.c
257 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
258 rbn Ignore UTF-8 marker at the start of .conf files.
259 rbn Add stab2cv to 3rd party dependencies. This is a utility I
260 wrote that is licensed under the GPL and available on SourceForge.
261 It converts the stab debugging info generated by gcc into Codeview
262 format. Currently it just translates function names to global
263 symbols. This is sufficient to get reasonable stack traces from
264 Dr Watson and to look at minidumps.
265 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
266 rbn Enable Windows XP look and feel for the tray icons and wx-console.
267 rbn Add Windows specific FileSet example to bacula-dir.conf.
268 rbn Reorganize Start menu so that documentation and configuration are
271 rbn Change daemons and utilities so that if -c is omitted from the
272 command line AND there is no configuration file in the current
273 directory then the 'standard' configuration file (eg
274 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
275 doesn't contain any path separators AND there is no configuration
276 file by that name in the current directory then the 'standard'
277 configuration file directory will be searched for a file by that
279 rbn Fixed restore on Windows so that backslashes as path separators works.
280 rbn Add missing query.sql file to Windows installer.
281 rbn Fixed Windows versions of catalog backup scripts.
283 kes Fix optional files in Makefile.in of src/filed that caused
284 a syntax error when using no optional files.
286 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
287 messages; there is no reason to attempt to load a private key.
288 from master key files.
290 Version 1.39.26 released:
292 kes Apply the three patches from Richard Mortimer.
293 bacula-reposition.patch, bacula-tape-reopen.patch, and
294 bacula-eod.patch. This corrects tape positioning on older devices,
295 and also a problem with btape.
296 kes Apply fix from bug report #696 where writing to a FIFO does not
297 work due to a dumb typo.
298 kes Unlock the tape door before the file descriptor is released. This
299 should fix lots of somewhat subtle failures when using an autochanger.
301 kes Correct mtx-changer bug that I introduced in a recent commit, and
302 pointed out by Robert Nelson -- thanks.
303 rbn Fix Windows' daemons so that messages print to stdout if not
304 running as a service.
305 rbn Add daemon name to trace file name (eg bacula-dir.trace).
306 rbn Fix environment variable expansion in directory names on Windows.
307 rbn Fix autochanger support in fill command.
308 rbn Update SQL scripts to match Unix versions.
309 rbn Fix daemon usage displays.
310 rbn Cleanup bacula-dir.conf template.
311 rbn Install openssl.cnf so that the openssl.exe installed in the
312 Bacula\bin directory can be used to generate keys and
313 certificates for TLS and encryption.
314 rbn Fix cleanup of spool files on Windows.
315 rbn Remove /silent option from daemons on Windows. The new default
316 is the same as the old /silent. To enable the message boxes that
317 previously were suppressed by /silent you must add /debug instead.
318 NOTE: As a result of this change, the first time you upgrade from
319 a previous version of 1.39.x you will receive the message
320 boxes when the remove of the old services succeeds. This
321 is the same behaviour as when migrating from a version prior
323 However, going forward, these message boxes will not appear on
324 upgrades or new installs.
325 rbn Add new /debug option. This option enables the message boxes that
326 previously were suppressed by the /silent option. In addition the
327 daemons running as services will open a console window if this
329 rbn Fix bug with service not being removed on migrated installs. This
330 should correct those cases where the file daemon install was failing
331 when upgrading from versions prior to 1.39.x.
333 kes Turn on heap reporting in Dir with zero debug level.
334 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
335 send the same message to stdout.
337 kes Begin work on new GUI 'console'.
338 kes Make configure look in non-standard MySQL library directory
340 kes Make mtx-changer automatically configure the autochanger wait
341 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
343 kes Correct drop_sqlite_tables.in script to not delete the database.
344 kes When writing to a log file, close and reopen the file descriptor
345 if there is an error writing the file.
346 kes Modify the autochanger loaded?, load, and unload commands to print
347 the full text of any mtx output if there is an error. Helps to
348 ease diagnosis of autochanger problems.
349 kes Correct a few Win32 errno returns in the VSS code so that hopefully
350 a resonable Win32 error message will be printed.
351 kes Convert a few strcat()... to bstrncat() in the Win32 code.
353 rbn Added Windows version of bsmtp.
354 rbn Fixed path search for Windows so that Bacula\bin is automatically
355 searched for programs and scripts.
356 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
359 Version 1.39.24 released:
361 kes Apply dvd find volume patch from Richard Mortimer.
362 kes Eliminate the dvd specific mount routines using only the
364 kes Make update_free_space a method of DEVICE and rename
367 kes Require a messages command acl to be able to receive messages
369 kes Add console, system, and scan job types in util.c.
371 kes Print the Volume purged message only for real jobs to keep
372 from cluttering up the daemon messages.
373 kes Lock the tape drive door while Bacula is using the device.
374 kes Add back the 'No Jobs running' message to FD and SD status because
375 my regression script depends on it, and I'm too lazy to change the
377 kes Start using structure assignments (not too happy about it ...).
378 kes Fix a bug in the tools Makefile that broke on Solaris.
379 kes Unload any autochanger drive during a 'release' command.
381 kes Enhance error message when restoring without bootstrap file.
382 kes Check restored size only for regular files.
383 kes Store Python job level in job record in Dir.
384 kes Add back code to open tape device nonblocking, but if rewind fails
385 release file descriptor.
386 kes Modify acquire.c to first try autoloading the device. Also, ask operator
387 to mount tape if drive cannot be opened.
388 rbn Made Windows service tray status windows resizable.
389 rbn Fixed horizontal scrolling of text in status window.
390 rbn Preserve horizontal and vertical scroll position while
391 updating. This prevents the display being reset to the
392 top line every 5 seconds.
393 rbn Fix Windows cross-compile compatibilty problems with
394 *nix variants such as OS X without the zic command.
395 rbn Eliminate dependency on man2html.
397 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
399 kes Fix a compiler warning in compat.cpp
400 kes Change strcpy to bstrncpy in compat.cpp
401 kes Remove some broken code in bdb_list.c
402 kes Fix, hopefully the last, ACL problem in the restore command.
403 kes Update the README.mingw32
404 kes Add new version of upgrade-win32-client.txt to examples directory.
405 Submitted by Michel Meyers.
406 kes Print an INFO message in the job report when a Volume is marked Purged.
407 rbn Fixed handling of external program and script execution
408 so that the format of the command line is more flexible.
409 Now executable path names containing spaces are translated
410 to the equivalent short name automatically. The result is
411 passed to cmd.exe with the quotes removed.
413 kes Apply the recycle patch from Richard Mortimer.
414 kes Convert a few if statements in dev.c to switch statements.
415 kes Start using print_errmsg instead of bstrerror().
416 kes Print a job message in SD when a job is marked to be canceled.
418 kes All code added back. Fixed block.c read/write to loop only 3
419 times. This apparently keeps the OS from crashing (at least
421 kes The kernel bug still persists. Backup something then immediately
422 do a bscan on the same tape, and the kernel will crash.
423 kes Simplifed tape open(). It no longer uses nonblocking mode, which
424 means that opening with no tape loaded will probably take at least
425 6 minutes before an error is reported.
426 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
427 when doing set_os_device_parameters.
428 kes Report open error in mount.c
429 kes Remove all .exe files from the installer directory on make clean.
431 kes Start adding back removed code.
432 kes Back out a number of changes because backups to tape crash my
434 kes Remove the inetd code from the File daemon.
436 kes Add -c option to pg_dump so that it initializes tables when
438 kes Fix FirstWritten time on Volume to be obtained from SD so that
439 it is the actual time the volume was first written.
440 kes Minor Makefile changes.
441 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
442 ebl Add yes keyword to prune/purge command
444 kes Correct a test in block.c that prevented restore of a DVD from
445 looking at the last part in the spool directory.
446 kes Make some error messages clearer mostly by using the word DVD
447 in the message. Improve infor message in read_record for DVDs.
448 kes Remove DVD kludges in dircmd.c label/relabel.
449 kes Move the dvd relabel code from dircmd.c into
450 write_new_volume_label_to_dvd() adding a relabel argument.
451 kes Rewrite the truncate_dvd() code to be much simpler and
452 more logical. First blow away any spool part, then create a
453 new empty part and write to the DVD.
454 kes Rewrite the can_write_on_non_blank_dvd() code making it
455 only ensure that no valid data is on the DVD -- i.e. it
458 kes Minor Makefile fixes.
459 kes Put attach_dcr_to_dev in a subroutine.
460 kes Make attaching/detaching to/from a device use a flag and
461 only detach if actually attached.
462 kes Add dvd-simulator.in to scripts directory and add to configure.
463 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
464 This could be a cause of a number of drive reservation problems.
465 Note, this code is now in attach_dcr_to_dev().
466 kes Suppress doing Volume updates if it is a system job. This should
467 prevent the DVD label blocking.
468 kes Clear the freespace ok flag in a couple of strategic places.
470 kes Put removing zero sized spool part file in subroutine and
471 call from release_device().
472 kes Add Richard's patch for relabel to dircmd.c, but save and restore
474 kes Rework a lot of subroutines in dev.c to take dcr as an
475 argument. This is done to eliminate the usage of attached_dcrs
477 kes Change truncated_dvd to blank_dvd, which seems more suitable.
478 kes Apply most of Richard Mortimer's truncate patch.
479 kes Create lseek() method for DEVICE that takes dcr as an
480 argument. This is to eliminate the use of attached_dcrs in
481 lseek(). The calls to lseek_dev() must still be changed.
483 kes Apply Richard Mortimer's patches for printing an error
484 message in btape when a DVD is used, and to initialize traceback.
485 kes Added error message to btape when trying to access a file.
486 kes Move prototype of update_slots() to protos.h.
488 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
489 and FDJobStatus to the Director Python variables.
490 kes Make sure valid argument passed to str_to_utime() where Arno
492 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
493 I.e. part of two different patches.
495 kes Modify disk changer to simulate some of the error conditions
497 kes Make sure the close() call in the SD tools is just before the
499 kes Implement dir_get_volume_info() in bls using the patch from
500 Richard Mortimer but call find_num_dvd_parts().
501 kes Implement find_num_dvd_parts() that mounts and scans a DVD
502 and counts the parts.
503 kes Move the omode code in open_dvd() up so that the cannot
504 write on blank disk can check can be bypassed for read mode.
507 kes Disable normal data spooling for DVD writing which uses
508 a different spooling mechanism.
509 kes Apply patch from Richard Mortimer to ensure that the number
510 of DVD parts is correctly updated.
511 rbn Save installer details log in the Bacula directory as
513 rbn Add installer generation of client and storage templates
514 suitable for @inclusion on the director.
515 rbn Mark previously installed Win32 components read-only since
516 deselection doesn't do anything.
518 Version 1.39.22 beta released:
520 kes Fix logic error in handling error return from mtx-changer
522 kes Make status from SD aware of -1 (unknown) Slot status.
523 kes At Eric's suggestion make both the 'slots' and 'drive' commands
524 to the Storage daemon work even if the drive is busy.
525 kes Make two separate Win32 menu links for starting bconsole and
526 wx-console in winbacula.nsi
527 kes Apply DVD part_spooled patch from Richard Mortimer
528 richm@oldelvet.org.uk
529 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
530 rbn Fixed problems migrating settings from previous releases in
531 Win32 installer. Add Readme.txt with an option to show it on
532 the installer Finish page.
534 kes Use get_catalog_resource() to open catalog database
535 to ensure that ACLs are respected and that user is
536 correctly prompted for database.
537 kes Integrate multiple console/director patch from
538 Carsten Paeth calle@calle.in-berlin.de
539 ebl Add character substitution in Job/JobDefs WriteBootStrap.
540 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
541 kes Apply patch supplied in bug #656 to pass priority field
542 in the run dialog to the Director in gnome console
543 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
544 this will fix bug #627 where Bacula eventually gets
545 confused about what Volume it wants.
546 kes Add a new close_part() class in the SD to save the device
547 state around open/close_part/open for DVD writing. This
548 should fix the num_dvd_parts getting zeroed as reported by
550 kes Apply patch from Richard Mortimer that correct edit code
551 for debug output of st_size.
552 ebl Add support of encrypted data stream to bscan.
553 display data_len instead of data content (may be binary)
555 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
556 bcopy. Fixes bug #669 reported by Eric.
557 kes Fix incorrect number of arguments in SQL statement in
558 sql_get.c as reported by Eric.
560 kes Update examples directory.
561 kes Remove unused variable in winservice.cpp
562 kes Make Win32 make command build installer.
563 rbn Add new Install Type page, used to select between Automatic
564 and Custom installs. Automatic installs only prompt for
565 configuration items that can't be reasonably defaulted.
566 rbn Added Bacula logo to page headers.
567 rbn Added Upgrade support
568 - Configuration and component selection are migrated from
570 - Configuration of upgraded components is preserved and
572 - Configuration of new components is handled according to
573 the Automatic / Custom selection.
574 - Component selection is defaulted to previously selected
576 rbn Installation of Server components is disabled on
577 Windows 95, 98 and ME.
578 rbn Added URLs for support, info and upgrades to Bacula entry
579 in Add/Remove Programs.
580 rbn Added Version info to Bacula entry in Add/Remove Programs.
582 kes Correct dvd code that breaks tape labeling.
583 kes Implement Enabled on update slots.
585 kes When doing a label, pass the VolBytes back to the Director,
586 which puts it in the catalog.
587 kes Print an error message if the user attempts to prune an
589 kes Need to start using %ld when sscanfing 32 bit values.
591 kes Correct the counting of VolCatBytes for DVDs.
592 kes Add code to mount.c to require that VolCatBytes corresponds to
593 what is actually found when doing an append.
594 kes Update freespace only after writing on the DVD.
595 kes Remove code that blows away the current part in the spool file.
597 kes Apply new dvd-handler patch from Richard Mortimer.
598 kes Tweak so that debug level 20 shows only DVD commands.
599 kes Correct spooled_part flag in dev.c close() so that it is cleared
600 when the spool file is deleted or does not exist.
601 kes Print part number in read_records when eof hit (restore).
602 rbn Installer default changed to start services on new install.
604 kes Make find with no args in tree restore return error rather than
605 stopping the selection. Fixes bug #665
606 kes Rework DVD writing to ensure that the last part is written
607 on open_next_part when dealing with a spool file.
608 kes Correct the lseek_dev() routine to handle end point correctly
609 (bug introduced by me).
610 kes Allow part number to exceed num_dvd_parts in lseek_dev().
611 rbn Change make_session_key on Windows to use WIN32 APIs to produce
613 rbn Add new tool scsilist.exe which displays the changer, tape and
614 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
615 to add them to bacula-sd.conf.
617 kes Apply dvd-handler patch from Richard Mortimer.
618 kes Apply dvd error check patch from Richard Mortimer.
619 kes Apply bpipe race patch from Richard Mortimer.
620 kes Rework how DVD labels are handled and set append only
621 when part > num_dvd_parts.
623 kes Rework many features of DVD writing and reading. Added many error
624 messages. Most importantly changed part to represent the current
625 part number base zero. This makes current DVD writing incompatible
626 with previous version.
628 kes Add host:port to connect failure messages to FD and SD from Dir.
629 kes Add WhereACL to console ACL list. If nothing is specified, only
630 the default is permitted for restore. Otherwise, *all* allows any
631 path, or you can specify permitted paths. This should allow control
632 over where users can restore files. This is untested.
633 kes Modified message to add a ? (as in loaded?) when querying the autochanger
634 for what Slot is loaded.
635 kes Fixed the use of Slot, so that is more correctly maintained, thus
636 eliminating unneeded duplicate calls to determine what Slot is loaded.
638 kes Install man pages with 'make install'
639 kes wx-console crashes because of differences between Bacula and wxWidgets
640 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
642 kes correct improper indenting in wx-console/console_conf.c
643 kes update wx-console header copyrights
644 kes Fix bug #658 where wx-console mangles file/directory names containing
647 kes Add Media.Enabled flag to client backups for dotcmds.c
648 kes Enforce Media.Enabled=1 for a current restore to work.
649 kes Require restore case 3 to have sqlquery permission to work.
650 kes Remove obsolete del_MAC sql command.
651 kes Ensure that bscan creates Volumes with Enabled=1.
653 Version 1.39.20 beta released:
655 kes Correct missing Client table reference in SQL pointed out by
658 kes Fix Win32 build (new entrypoint, start baculafd).
660 kes Add -n option to bconsole to turn off conio.
661 kes Print JobIds to be migrated in Job Report.
662 kes Add additional user supplied notes to the messages part of
663 bacula-dir.conf concerning multiple email addresses.
664 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
665 kes Add more recent Feature requests to Projects file.
667 kes Apply Maritn's fix to src/win32/Makefile.
668 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
669 kes Implement pruning for Migration and migrated jobs.
670 kes Implement PoolOccupancy migration.
671 kes Implement PoolTime migration.
673 kes If doing a mount, look for a slot, and if specified pass it to
674 the SD so that it can load the autochanger.
675 kes Return DVD=1 flag if a label command is done to a DVD. This
676 permits setting VolParts to 1.
677 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
678 rework ua_label code based on DVD media type to use DVD flag returned.
680 kes Eliminate some compile warnings in dird_conf.c
681 kes Format the bytes field in the terminated jobs part of the status
682 command for the three daemons with suffixes to reduce print size
683 of backup bytes. Suggested by a user.
684 kes When not descending into a directory, print the File= name that
685 triggered it -- makes why not descending a bit clearer.
686 kes Do not unload autochanger when doing a list command -- basic code
687 from Eric Bollengier.
689 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
690 to build-depkgs-mingw32. It now handles two options -h to display
691 help and -C to reextract the source and apply the patches. The -C
692 option is useful for updating the source after new patches are
694 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
695 This allows updating to new versions without having to modify the
696 script and makes it easier to figure out which packages and which
698 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
699 as build-depkgs-mingw32 except they are built using Microsoft Visual C
700 and placed in the depkgs-msvc directory. There is also an
701 External-msvc file to describe the packages.
703 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
705 kes Fix bug #462 incorrect error message printed when client script called
706 from File= was not found.
707 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
708 do a rewind on Solaris when no tape is in the drive (Solaris does not
709 have the detailed errno found on Linux). Added Solaris specific code.
710 Note, this may apply to other OSes as well.
712 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
713 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
714 fix bug 648 - update sqlite script patches, lock out gnome2console
715 builds for platforms with gtk+ < 2.4.
716 Updated build_rpm.sh - add remote source directory, add switch for
717 signing, refine file names.
718 Updated spec file again for Mandriva build as they have this curious
719 custom of silently converting all manpages to bzip2 format just before
720 the final packaging step.
722 rbn Fixed the Windows Makefiles so that they won't accidentally try and
723 pickup binaries for the Unix build. This allows both the Unix
724 build and the Windows build to be built in the same tree without
725 interfering with each other.
726 rbn Fixed error handling and cleaned up mtx-changer.cmd.
727 rbn Added the rest of the database scripts. These are installed but are
728 not yet edited for variable replacement.
729 rbn Broke out the cats functionality from bacula.dll and put into new
730 separate dlls for each database type. At installation time the
731 correct one is copied to bacula_cats.dll.
732 rbn Eliminate the need to install the mysql.dll on client only builds.
733 rbn Moved dird/sql_cmds.c into the cats directory so all the database
734 specific #ifdefs were in the cats directory.
735 rbn Added a new sql_cmds.h with all the declarations for the variables
736 exported from sql_cmds.c.
737 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
738 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
740 kes Correct improperly formatted list command output reported by Dan.
742 kes Correct despool time calculation.
744 kes Remove previous changes to compat.cpp as they create problems.
745 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
746 kes Attempt to fix problems with the msg_queue crashing on Solaris
747 when Bacula is terminating, but problems remain.
748 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
749 name editing problems with too many \\?\es.
750 kes Fix some Bacula source code style problems in compat.cpp.
751 kes Add debug code to compat.cpp and convert non-Bacula debug code
754 kes Change the name of the technical notes file from kes-1.39 to
755 technotes-1.39. Prefix my messages with 'kes '.
756 kes Allow dequeue_messages() to be called twice. Should fix bug
758 kes Add Job type to bscan Job information output.
760 kes Update copyright date in program files, and for the most part
762 kes Implement %q in bsnprintf.c apparently I forgot it.
764 kes Make disk-changer sed command compatible with FreeBSD.
765 kes Make a first cut at a ReleaseNotes and ChangeLog for a
767 kes Make make clean descend into the src/win32 directory.
768 kes Fix some #ifdefing so that Solaris and FreeBSD compile
769 sys/stat.h was turned off.
770 kes Use suffix editing for new transfer rate messages.
771 kes Attempt to come up with a workaround which seems to be an OS
772 bug where write() returns EBUSY. IMO this should not happen.
773 It triggered in truncatebug test. The workaround retries using
775 kes Eliminate a strerror() call in a class method that failed with
777 kes Use rm -rf rather than rmdir to delete the src/win32/release
778 directory during make clean.
780 kes Make bscan ignore ACL streams.
781 kes Update projects files with new Feature Requests.
782 kes Generate current English and French manuals and upload
784 kes Update the home page to include the new British/French flags to
785 switch between translations. Work done by Alexandre Baron.
786 kes Make disk-changer script print an error message if the changer
787 directory is not defined.
788 kes Create a generic DB routine for getting an int (32/64 bit) from
790 kes Add more migration code.
791 kes Add a few more files to .cvsignore here and there.
792 kes Minor fixes for SD write rate and despooling rate.
793 kes Turn off new test code in src/console.c
797 kes Incremented the version number to signify that all of Robert's code
798 for Win32 that was in the branch is now integrated into the HEAD,
799 and that Eric has submitted code that we hope will provide limited
800 backward compatibility with 1.38 file daemons (more testing to be
802 kes I rationalized a few of the names of the variables (mainly jcr names)
803 that are used during migration as keeping three different jcrs at the
804 same time clear in ones head is not easy.
808 eb Tweak new runscript feature to work with 1.38.x FDs.
809 eb Correct crypto.c to fix segfault when restoring an encrypted stream
810 on fd which don't use rsa keys.
811 eb Add yes/no English keywords on localized yes/no questions.
813 kes Several important commits from Robert Nelson for code cleanup and
815 kes Modify console.c so that when conio is enabled, it converts \n to
816 \n\r before outputting to the console. Hopefully this will fix
817 the problems with expect in Perl that Eric saw.
819 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
821 kes Add Comment field to llist of a volume.
822 kes Allow true/false in some yes/no questions.
823 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
824 kes Remove a few /n's when scanning commands from another daemon. This
825 permits adding additional fields later.
826 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
827 kes Update README.mingw
829 kes Tweak authentication to work with 1.38.x FDs.
830 kes Tweak catalog make scripts.
831 kes Fix catalog upgrade scripts so that they work.
832 kes Correct despooling debug code to eliminate race condition.
834 kes Add additional fields as specified by Arno to LocationLog.
835 kes Add comment field to the Media record.
836 kes Add Time field to the Log record.
837 kes Correct migration SQL (thanks to Bill Moran) so that it
838 runs with PostgreSQL also.
839 kes Add spooling/despooling info in status output of SD.
841 kes Spend a lot of time integrating mkcdrec with the rescue disk.
842 kes Add VOLMGMT message class for volume management messages (none yet).
843 kes Add CATALOG as a destination. It goes into the LOG table.
844 kes Implement the Log table in the DB.
845 kes Implement the Location Log table in the DB (for user use).
846 kes At Eric's request add a run_scripts() just after blast_data in
849 kes Add Enabled column to Location, correct some typos in DB schemas.
850 kes Correct bug I introduced into RunScripts enum.
851 kes Add log table to Catalog
852 kes Purge original job migrated if the migration terminates normally.
853 kes Cleanup purging of files/jobs so that it is done only in a
855 kes Add new VOLMGMT message class.
856 kes Add Catalog message destination (user conf code remains to be written).
858 kes Modify read_record and friends to properly deal with migration
860 kes Update debug code in read_record.
862 ======================= Warning ==========================
863 Separate read and write storage in Jobs in the Director. This
864 is a major rewrite of some of the low level code and hence has
865 a high probability of introducing bugs.
866 ==========================================================
868 kes Move the job init code up to *before* the job is put into
869 the job queue (resource allocation queue). This permits the
870 job to establish whether it will read or write or do both.
871 kes Add name() methods to all the resource classes.
872 kes Implement separate read and write storage resource
873 allocation/deallocation in jobq.c
875 ======================= Warning ==========================
876 Implemented new method of getting the default Storage from the Media
877 record rather than from the MediaType for restore. As a fall
878 back, if no Storage is defined, use the MediaType. This
879 eliminates most all prompts if there are multiple MediaTypes
880 used. This is an important and fundamental change.
881 ==========================================================
883 kes Add more detail (Storage, Device) to list of volumes printed
885 kes More code in migrate. In particular start multiple jobs if
887 kes Probably overkill, but ensure that the bsr is unique even within a
889 kes Rework bsys.c drop() so that it now should work as expected.
890 kes Update a bunch of old copyrights -kes particularly in .h files.
891 kes Remove src/lib/bshm.c/h
895 ======================= Warning ==========================
896 All hash codes in the database are now kept in world
897 compatible base64 format (no = filling). This means that
898 all FileSets will be updated and if you are running
899 verify jobs, you must do an InitCatalog.
900 Authentication uses the new algorithm, but should be
901 backward compatible with 1.38.x
902 ===========================================================
904 kes Modify the authentication routines so that the 1.39.15 Director
905 always runs with the compatible binary to base64 code (same as
906 the rest of the world). It will however detect if an SD or
907 FD is running the old code and if that is the case, will use
908 the old algorithm for authentication. However, all consoles must
909 use the compatible algorithm, and all data entered into the database
910 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
911 use the compatible algorithm.
912 kes Rename the cram_md5 routine names to be slightly more appropriate
913 to what they are doing (challenge and respond).
914 kes Robert committed his #ifdef and header cleanup.
916 kes Fix a compiler warning in files/backup.c
917 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
919 kes Robert committed his low impact changes.
920 kes I removed a size_t from the jcr.h definition.
921 kes Update the tape regression scripts (still to be tested).
922 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
923 kes Require done or quit to exit from in memory tree restore.
925 kes Write install/uninstall of new manpages. There are now a
926 pile of man pages. Some of which need a lot of work.
928 ======================= Warning ==========================
929 The --mandir ./configure option now points to the top level
930 man directory. The man files will be installed under
931 mandir/man8 and mandir/man1 as appropriate.
932 ==========================================================
934 kes Add complete text of GPL to LICENSE.
935 kes Implement job report that indicates where Storage and Pool
936 came from -kes with overrides and Pool storage and NextPool,
937 it is all very complicated.
938 kes Create a few common subroutines for backup.c and migrate.c
939 kes Eliminate warning messages from tray-monitor.c
941 kes Apply fix for scheduler for missing unlock_jobs().
942 kes Clean out autoconf caches before rebuilding configure
943 kes Fix the FreeBSD pthreads lib define updated by Dan.
944 kes Add missing semicolon in src/console/console.c
945 kes Add Robert's enhanced version of build-win32-cross-tools
946 as well as his patch file.
947 kes Note, the new gcc options are likely to break building of
948 wx-console or the tray-monitor ...
950 kes Implement Robert's suggestion to suppress printing compile lines.
951 kes Detect GCC correctly (I hope)
952 kes If using GCC (actually g++) add the following compiler flags
953 -fno-strict-aliasing -fno-exceptions -fno-rtti
955 ===================== Warning =============================
956 Turn on new bsnprintf() code. This could cause print output
958 ===========================================================
960 kes Fix crypto when not using openssl. I previously overlooked this.
961 kes Eliminate crypto type punning problems by eliminating void * and
962 using uint8_t * instead.
963 kes Harden authentication failure in FD by single threading errors
964 and forcing a 6 second wait.
966 ===================== Warning =============================
967 Removed 'Accept Any Volume' directive.
968 ===========================================================
970 kes Major cleanup and simplification of regress using shell functions
971 (more tests to be converted to new format)
972 kes Add detection of 64 bit Irix as indicated by user.
973 kes Increment catalog database id from 9 to 10.
974 kes Add a few of the new database fields to the various C++
976 kes Implement code to fill in the most important new fields (e.g.
978 kes Ensure that most of the new fields are in create/get/insert/update.
979 More work to be done.
981 kes Update some very old licenses in src/cats.
982 kes Modify the database format for handling Migration jobs:
983 Add PriorJobId, RealEndTime to Job table
985 Remove Stripe from JobMedia record (not used, wasting space)
986 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
987 Add Cost to Location table.
988 kes Delete mac_record subroutines.
989 kes Add new table values to create/update/get routines as appropriate.
990 kes Update the update_tables and make_tables scripts.
991 kes Make a first cut in using a union where multiple pointers (actually
992 pointers to pointers) are stored.
993 kes Make some changes to base64.c suggested by Robert and others and add
994 a small amount of documentation.
995 kes Add some changes suggested by Peter for Solaris (bregex...)
996 kes Make runscript.h always built because it needs to be pulled into
997 more places. In particular its RES was left out of a union.
998 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
999 This makes it slightly easier to detect uninitialized variables.
1001 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
1002 sometimes creates install problems.
1003 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
1004 Nelson's code. More to do.
1005 kes Convert a few store_bit to store_bool in filed_conf.c.
1006 kes DVD tweak to block.c as supplied by Uwe Muessel.
1008 kes Modify configure.in to check for typeof().
1009 kes In findlib/attribs.c use typeof instead of templates if possible.
1011 kes Implement partial error messages for src/filed/acl.c
1012 kes Fix return code to fail when doing update barcodes and
1013 Pool resource is not found. This previously caused Volumes
1014 to be labeled as cleaning tapes.
1015 kes Small updates to projects.
1017 kes Add Eric Bollengier patch for new RunScript directive. It breaks
1018 compatibility between dird and fd.
1020 kes Prevent DVD code from rewriting label if the device cannot be
1022 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1023 fix Debian build bug.
1024 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1025 kes Integrate manpages contributed by Jose Luis.
1026 kes Update projects file.
1027 kes Add manpages Makefile.in to configure.in
1028 kes Remove installation of bacula.8 in scripts directory.
1030 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1032 O_NOATIME is a open() flag which makes it possible to read a file without
1033 updating the inode atime (and also without the inode ctime update which
1034 happens if you try to set the atime back to its previous value). It also
1035 prevents a race condition when two programs are reading the same file, but
1036 only one does not want to change the atime. It's most useful for backup
1037 programs and file integrity checkers (and bacula can fit on both
1040 Recent versions of the Linux kernel and glibc have support for it (the
1041 glibc support being mostly copying the O_NOATIME definition to
1042 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1043 it does nothing (since the kernel ignores unknown flags).
1045 If the kernel has support for it, trying to use it either works, fails
1046 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1047 are not either the owner of the file or root). A simple way to prevent the
1048 failure is to open the file without the flag and set it later with
1049 fcntl(F_SETFL), ignoring any EPERM errors.
1050 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1051 of restarted jobs to complete (due to a destroyed pthreads conditional
1052 variable used by the message thread).
1053 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1055 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1056 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1057 colons in query.sql file.
1058 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1059 not to create orphans.
1060 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1061 in restore long listing.
1062 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1063 of incorrect MarkedId.
1064 kes Apply patch from adioso bug #616 to correct text in manual (replace
1065 Director with File daemon).
1066 kes Rework a few of the zlib changes so that they build properly.
1069 kes Move DIR 'run' command to SD before starting the message thread
1070 as suggested by Cristopher Hull to avoid a race deadlock from
1071 two threads using the bsock structure.
1072 kes Modify LICENSE to correct some problems pointed out by Debian.
1074 kes Correct EOF with no \n lex.c problem.
1075 kes Tweak compat.h compat.cpp and merge with apcupsd
1076 kes Add additional INFO messages if autochanger cannot be used.
1079 kes Simplify Win32 Makefile
1080 kes Correct count of buffers/bytes used by smartall.c
1081 kes Updated compat.h after porting apcupsd to MinGW.
1083 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1084 started adding Makefile ...
1085 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1087 kes Reloading a bad configuration file doesn't kill director any more.
1088 Thanks to fix from Eric Bollengier.
1090 kes Fix problem of accents with new Win32 code.
1091 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1092 works in the MinGW build with the exception that there
1093 is a problem with accented characters -kes i.e. there is
1094 some mapping problem with wide characters.
1095 kes The code no longer compiles with Microsoft VC++.
1097 kes Start implementing Christopher's St.Bernard code.
1098 kes Add Christopher's mods for opening files.
1099 kes Strip \r \n from Win32 error messages (Christopher)
1100 kes Add more info about Win32 system if unknown (Christopher)
1101 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1102 kes Fix a number of incorrect strings marked for translation, when
1103 they should not be (e.g. commands).
1104 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1105 Patches supplied by user in bugs #608 and #599.
1106 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1107 listing. This fixes some problems with Win32 printing incorrect
1109 kes Correct the clock shift comm time calculation between the DIR
1110 and the FD. It was added rather than subtracted.
1111 kes Strip all backslashes in filenames to be restored on Win32
1112 machines -kes the names should all be in Unix format, and if
1113 there are any backslashes it is most likely due to an improper
1114 FileSet definition, and the files will not otherwise be
1116 kes Remove lib/regex.c (replaced by bregex.c).
1117 kes Delete src/win32/License.txt
1118 kes Modify installer to install LICENSE
1120 kes Fix bug in build-win32-cross-tools script reported by Howard
1121 kes Implement cross compiled bconsole
1123 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1124 kes Write first cut of README.mingw32
1125 kes Add back ua_label barcode fix from Rufolf Cejka.
1126 kes Integrate the majority of the Mingw cross-tools submission
1127 made by Howard Thomson. Everything compiles, with zlib, openssl,
1128 and VSS turned off. Linking needs a pthreads library ...
1130 kes Add 'Dir Status' button to the gnome console.
1131 kes More work on migration.
1132 kes Restore non-compatible base64 coding to permit compatibility.
1133 kes Display heap stats in Storage daemon without debug level.
1135 kes Integrate most of the MinGW changes -kes more to do.
1137 kes Implement using pg_config for finding PostgreSQL files.
1138 Fixes bug #600. Patch supplied by user.
1139 kes Remove -t option from mktemp in mtx_changer.in and use
1140 working directory. Fixes bug #578.
1141 kes Update job start time after the any run before job so that
1142 files created by the script are only backed up once. Fixes
1144 kes Strip trailing newline only from filenames entered in
1145 the restore command when reading a file. This permits
1146 the user to enter filenames with trailing spaces. Fixes
1147 bug #549. The user supplied a patch that I modified slightly.
1148 kes Use the most recent time (st_mtime, st_ctime) in the dir
1149 command in restore. This gives the user a better idea of what
1150 the newest file really is. This fixes bug #574. The fix
1151 was suggested by the user.
1152 kes Implement a compatible version of base64. This permits external
1153 programs to duplicate Bacula's base64 algorithm using standard
1154 routines. This fixes bugs #296, and 565. Patch submitted by
1156 ================= Note ========================
1157 Previous Signatures stored in the database are no longer
1158 compatible with this. The main downside is for Verify jobs,
1159 and doing an InitCatalog run will fix the problem. Also, the
1160 authentication between the deamons is changed, so all daemons
1161 must be simultaneously upgraded.
1162 ==============================================
1163 If you don't like this fix, set:
1164 const bool compatible = true;
1166 const bool compatible = false;
1169 kes Ensure that DB signature is never NULL.
1170 kes Ensure that DB table names are not translated.
1171 kes Fix scheduler to handle time skew (eg daylight savings).
1172 kes Fix scheduler to use lock_jobs() to avoid most problems
1173 with reload. Window is now milliseconds.
1175 kes Apply patch from Christopher Hull
1176 kes Allow multiple connections to database with different
1178 kes Invalidate the scheduler when doing a reload. Fixes seg
1179 fault, but still 60 second window.
1180 kes Additional info in Reschedule message.
1181 kes Use set_jcr_job_status() everywhere to prevent loss of
1183 kes Display peer IP in FD if error from connecting DIR.
1184 kes Don't increment file count for DIRBEGIN.
1185 kes Replace illegal characters in Win32 filename by _.
1186 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1187 kes Hash hard link filenames rather than linked list.
1188 kes Fix for security failure in chdir on Win32.
1189 kes Add CreateDirectoryA/W win32 API entry points.
1190 kes Add /silent option to Win32 FD for Install/Remove service.
1191 kes Always print Heap statistics in FD.
1193 kes Remove the -f option from the chown in Makefile.in for more
1195 kes Change setting the group in Makefile.in to use chgrp for
1197 kes Implement a write_store and read_store to replace
1198 dirstore in reserve.c
1199 kes Implement a Bacula read/write lock for Python rather
1200 than using the Python lock to avoid recursive problems.
1201 kes Correct the uninstall directory names in filed/Makefile.in
1202 as reported by a user.
1204 kes Correct some problems with database creation (new tables).
1205 kes Replace a bunch of old 0x%x by %p.
1206 kes Get first cut of Migration with Job selection working.
1208 kes Change store_bit() to store_bool() for the Spooling in
1209 dird_conf.c -kes bug reported by Robert Nelson.
1211 kes Correct Makefile bug found by Dan Langille.
1213 kes Correct Makefile for Solaris /bin/sh
1214 kes Correct mtx-changer.in for Solaris /bin/sh
1215 kes Abort if a conf resource does not have a Name =
1217 kes Change the name of the regex program to bregex.
1218 kes Add the bwild program to the tools directory. It is similar
1219 to the bregex program.
1220 kes Implement create bregex.h and bregex.c in src/lib from the
1221 Python regexp program.
1222 kes Use the new bregex.c to implement Regex expressions on Win32.
1224 kes More work on migration.
1225 kes Implement wild program in tools directory for testing
1226 wild-cards. Almost identical to the regex program.
1227 kes Up port VSS single thread locking code.
1228 kes Replace N_(..) by NT_(...) to inhibit translation of
1230 kes Modify Makefile to change the permissions on Working Directory
1231 to 770 if the directory is created.
1232 kes Do not fail the Makefile if changing the permissions or
1233 owner/group on WorkingDir fails.
1234 kes Remove early selection of Scratch Volumes in the recycling
1236 kes Correct the old recycling algorithm so that Scratch Volumes
1237 are selected when looking for a Volume in the changer.
1238 kes Correct a typo in the Verify SQL reported by Joe Park.
1240 kes Remove automatic case folding on Windows FDs. You must
1241 explictly use the 'Ignore Case = yes' option.
1242 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1243 scratch volume in an Autochanger early in the 'recycling'
1246 kes Make weof() and clrerror() methods of class DEVICE.
1248 kes Tweak license to include Microsoft restrictions.
1249 kes Move mysql.reconnect to after real_connect(). Thanks to
1250 Frank Sweetser for the patch.
1251 kes Disallow a backslash in a File = directive (Windows junk)
1252 unless the string is quoted.
1253 kes Apply Eric's patch to ua_label.c so that daemon protocol
1255 kes Add NT_ definition for strings that should not be translated.
1256 kes Apply NT_() to ua_label.c
1257 kes Remove timed wait for VSS on Win2K3 as it is not yet
1259 kes Correct bacula.in script to reference bacula-ctl-xx in the
1260 sysconfig directory rather than the bin directory.
1262 kes Fix a long standing bug in the bacula start/stop scripts.
1263 kes Attempt to add the new bacula-ctl-* files to the rpm.
1264 kes Switch to using typeof() for list traversing to avoid
1265 as many FC5 g++ compiler warnings as possible.
1267 kes Split the bacula start/start script into four files:
1268 bacula -kes starts and stops calling other scripts
1269 bacula-ctl-dir -kes starts/stops the director
1270 bacula-ctl-fd -kes starts/stops the File daemon
1271 bacula-ctl-sd -kes starts/stops the Storage daemon
1273 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1274 kes Correct editing of JobId from int to int64 in fd_cmds.c
1275 kes Eliminate FileSet name race with bash_spaces() and multiple
1276 threads by bashing in a local.
1277 kes Fix error return from 'use storage' to print a correct error
1278 message rather than nothing.
1279 kes Correct false re-read last block error message when two jobs
1280 are simultaneously writing at the end of a tape.
1281 kes Simplify exit conditions in the reserve.c code to avoid
1282 possible non-release of reservation_lock().
1283 kes Suffle lock order in reserve to avoid deadlock between
1284 reservation lock and device mutex.
1286 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1287 tracking this down for me !!!! as it broke the Win32 build.
1289 kes Integrate addition of line count limitation to bsmtp -l from
1290 Sebastian Stark <stark at tuebingen.mpg.de>
1292 kes Implement regex test program in tools directory.
1293 kes Attempt to fix time problem with bsmtp with foreign langs.
1294 kes Add strip_trailing_newline() submitted by user.
1295 kes Implement regex matching in migrate.c
1297 kes Fix bug #537 to allow arbitrary time to mount a volume for
1298 restore, if polling is turned on.
1299 kes If dir_user or dir-group is specified in ./configure apply it to
1300 the working-dir. Fixes bug #533.
1301 kes If rescheduling a job cancel the previous incarnation with the SD.
1302 Fixes bugs #566 and 557.
1303 kes Fix bug #567 do_message() definition type conflict.
1306 kes Add more jcr methods and make mutex and use_count private.
1307 kes Create lock/unlock methods for jcr.
1308 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1309 records to get to seek position.
1310 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1311 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1312 terminates correctly by doing pthread_kill(). Do not destroy
1313 SD cond wait variable between executions of the job. Use local
1314 mutex for cond variable to avoid blocking jcr chain. Fix poor
1315 use of jcr use count in jobq.c for restarted jobs.
1316 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1317 lib/jcr.c -kes prevents locking the jcr chaing.
1318 kes Apply patch from bug #564, which corrects listing volumes with
1319 multiple autochangers. Apply same fix to next volume list.
1320 kes Fix bug #562 where restore bootstrap file is not unique.
1321 kes More details in implementing David's migration syntax proposal.
1322 kes Save and restore dcr when swapping drives so that if we have
1323 a write dcr it is not lost.
1324 kes Use new routine lock_reservations() to lock the reservations
1325 system, and call it while looking for a volume in askdir.c.
1326 This could possibly fix bug #543.
1327 kes Stop SD command loop if job is canceled.
1330 kes Remove old code from findlib/create_file.c
1331 kes Rename mac.c migrate.c
1332 kes Add user friendly display of VolBytes in job report.
1333 kes Rename target... to previous... to make it a bit easier to
1335 kes Add selection type and selection pattern to Migration (idea
1336 given by David Boyes).
1339 kes The po files should now be current.
1340 kes Fix new sql_use_result() code to properly release the
1341 buffers in all cases.
1342 kes Use the keyword ujobid to mean the unique job id; job or jobname
1343 to mean the Job name given on the Name directive, and jobid to
1344 be the numeric (non-unique) job id.
1345 kes Allow listing by any of the above.
1346 kes Add the user friendly job report code for reporting job elapsed time
1347 and rates with suffexes from John Kodis <kodis at comcast.net>.
1348 kes Add Priority and JobLevel as Python settable items.
1349 kes Use TEMPORARY table creation where the table is created by
1351 kes Add new code submitted by Eric for waiting on specific jobid.
1352 kes Add ACL checking for the dot commands.
1353 kes Fix restore of writable FIFOs.
1354 kes Fix a bug in bpipe where the string was freed too early.
1356 kes Modify the Python class examples to inherit object -kes new way
1357 of defining classes. Patch from Felix Schwarz.
1358 kes Implement jobuid to replace old usage of job in keywords as
1359 suggested by Eric Bollengier.
1360 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1361 wait (wait for all jobs to stop)
1363 wait jobuid=unique id
1365 kes Implement write variables for Python to set Priority (anytime), and
1366 Job Level, only during JobInit event.
1368 kes Fix the block listing bug pointed out by Arno.
1369 kes Update the po files at Eric's request.
1371 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1372 accept time qualifiers.
1373 kes Make catalog respect ACL.
1374 kes Add recycle count to Media record.
1376 Changes to 1.39.6-beta1 24Feb04
1378 kes Add Rudolf Cejka's new rc-chio-changer.
1379 kes Implement pulling Volume from Scratch Pool if the
1380 Volume is in the autochanger.
1381 kes Implement additional command arguments for update Volume.
1385 kes Back port changes to 1.38.5
1386 kes Fix recycle SQL for StorageId.
1387 kes Fix misplaced quote in mtx-changer script.
1389 kes Note. Your database must be updated, or you must create
1390 a new database. I have not yet incremented the database level.
1391 kes Add Location table.
1392 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1394 kes Implement create/get mac record in database for adding extended
1395 Migration data to the job record.
1396 kes Add new MAC table to update/make database scripts.
1397 kes Return Storage name used when getting VolumeNames for a job.
1398 kes Change bsr file keyword Storage to Device, which is more accurate.
1399 kes Ensure that Mac records are pruned/purged.
1400 kes Tweak SD tools to deal with changing media type.
1401 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1402 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1403 that the subroutine can switch devices, and hence dcrs.
1404 kes Modify the multiple MediaType read code to re-use the same
1405 dcr when switching devices. This makes the code much more
1407 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1408 from a table for restore.
1409 kes Add Storage name to VolParams, but it really should be Device.
1411 kes Add disk-changer to scripts directory + configure/Makefile
1412 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1413 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1414 kes Implement new store_bool that stores in a bool.
1415 kes Add true/false to yes/no conf directives.
1416 kes Make first cut at changing appropriate store_yesno to store_bool.
1417 kes Complete implementation of Pool storage devices.
1418 kes Move starting clones to job.c
1419 kes Move create_restore_bootstrap_file() to job.c
1420 kes Make copy_storage() more general to be able to handle
1422 kes Cleanup a lot of migration code for manual running, including
1424 kes Move getting a scratch Volume into a subroutine.
1425 kes Make all places a Volume that is added to a pool to
1427 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1428 kes Fix segfault in restore command when no value specified.
1429 kes Start adding code to handle multiple MediaTypes in restore.
1430 kes Eliminate race condition in getting Volume name for
1431 two drive autochanger.
1432 kes More debug code in autochanger.
1433 kes Add storage keyword to bootstrap file, add parsing.
1434 kes Move slot in bsr file into Volume record as there will be
1435 a different slot for each Volume.
1436 kes Create reserve.h
1438 kes Implement Pool storage overrides.
1440 kes Implement first cut of Migration.
1441 kes Implement mysql_use_result() from patch by Karl Hakimian.
1442 This reduces significantly the memory consumption during
1443 the restore tree building, and hence runs faster too.
1444 kes Implement StorageId patch supplied by user (reggie) in bug
1445 #536. This should permit Bacula to work correctly with two
1447 kes Implement Job listing variations suggested by a user.
1448 kes Move updating bootstrap code in backup.c to subroutine
1449 update_bootstrap_file().
1450 kes Add new job status elapsed time and bytes written user
1451 friendly job report output patch sent by John Kodis
1452 <kodis at comcast.ne>.
1453 kes Implement a storage list in Pools.
1454 kes Separate out setup_job() code from run_job().
1455 kes Get migration working -kes lots of changes in mac.c in both
1457 kes Apply patch from user (Eric Bollengier I think) that fixes a
1458 DIR crash when no arguments are supplied to a dot command.
1459 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1460 kes Fix command arg name->volume in label command of gnome-console.
1461 kes Fix SD acquire.c to release correct DCR by explicitly testing
1462 on the dcr address rather than trying to devine if it is a read
1463 or write dcr. This failed in error conditions when the device was
1467 kes Apply user supplied patch for more readable rate output
1469 kes Continue implementing migration.
1470 kes Implement support for removable filesystems in SD.
1471 kes Ensure that btraceback scripts can be read by anyone.
1472 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1473 kes Correct bug where canceling restore before the FD contacts
1474 the SD causes the drive to be left in read mode.
1475 kes Move ofline_or_rewind into DEVICE::close().
1476 kes Eliminate close_device.
1477 kes Convert several dev subroutines to methods (e.g. bsf,
1479 kes Eliminate force_close_device().
1480 kes Implement Device Type directive in Device resource that
1481 can have values File, Tape, Fifo, DVD, or Prog.
1482 kes Add has_cap() method to Device.
1485 kes Add patch from bug #527 to allow RedHat user to specify
1486 options/user/group for starting each daemon in
1487 /etc/sysconf/bacula.
1489 kes Add two new queries to query.sql provided by Arno. One
1490 list volumes known to the Storage device, and the other
1491 lists volumes possibly needing replacement (error, ...).
1493 kes Add periodic (every 24 hours) garbage collection of memory
1494 pool by releasing free buffers.
1496 kes Correct bug counting sized (for display only) in smartall.c
1497 kes Print FD mempool stats if debug > 0 rather than 5.
1499 kes Make db_lock() mutex error fail the job rather than abort
1500 Bacula. Canceling the job caused the mutex to fail.
1501 kes Correct bug in alist.c that re-allocated the list if the
1502 number of items goes to zero.
1503 kes Move the reservation system thread locking to the top level
1504 so that one job at a time tries all possible drives before
1506 kes Implement a reservation 'fail' message queue that is built
1507 and destroyed on each pass through the reservation system.
1508 These messages are displayed in a 'Jobs waiting to reserve
1509 a drive' list during a 'status storage='. Note, multiple
1510 messages will generally print for each JobId because they
1511 represent the different problems with either the same drive
1512 or different drives. If this output proves too confusing
1513 of voluminous, I will display it only when debug level 1
1514 or greater is enabled in the SD.
1516 kes Add enable/disable job=<job-name>. This command prevents
1517 the specified job from being scheduled. Even when disabled,
1518 the job can be manually started from the console.
1519 kes During 'update slots' clear all InChanger flags where the
1520 StorageId is zero (old Media records).
1522 Beta release 1.38.4:
1524 kes Fix autochanger code to strip leading spaces from returned
1525 slots number. Remove bc from chio-changer.
1526 kes Back port a bit of 1.39 crypto code to reduce diffs.
1527 kes Fix first call to autochanger that missed close()ing the
1528 drive. Put close() just before each run_program(). Fixes
1531 kes Add PoolId to Job record when updating it at job start time.
1533 kes Pull in more code from 1.39 so that there are fewer file
1534 differences (the new ua_dotcmds.c, base64.h, crypto.h
1535 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1536 util.c. Aside from ua_dotcmds.c these are mostly crypto
1538 kes Implement new method of walking the jcr chain. The
1539 incr/dec of the use_count is done within the walking
1540 routines. This should prevent a jcr from being freed
1541 from under the walk routines.
1546 kes Start implementing Verify list output.
1547 kes Move the suitable_drive flag to a better place to prevent
1548 premature termination of the reservation if all drives
1549 are busy -kes should fix Arno's diff/inc pool failures.
1551 kes Add mutex to single thread VSS code in Win32.
1553 kes Simplify code in askdir.c that waits for creating an appendable
1554 volume so that it can handle multiple returns from the wait
1556 kes Modify the wait code to permit multiple returns.
1557 kes Return a zero when 'autochanger drives' is called and
1558 it is not an autochanger.
1559 kes Make rewind_dev() a method taking a DCR as an argument.
1560 This permits closing and reopening the drive if the
1561 rewind fails as happens if the drive was loaded while the
1562 file descriptor was open. This refreshes the file descriptor.
1563 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1564 if the device is open or not. This should eliminate
1566 kes Return error if reserve cannot find at least one suitable device.
1567 kes Make wait_for_sysop() return correct state information.
1568 kes Fix Win32 state file problem. write was not using compat
1569 code. This should fix bug #500.
1571 kes Modify gui on command to set only GUI mode and not batch.
1572 kes Modify .messages command to always print messages regardless
1574 kes If GUI mode is on, suppress automatic printing of
1576 kes Delete old bnet packet code.
1577 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1578 wx-console. -kes not implemented because bconsole must be updated.
1579 kes Modify restore command in wx-console to set gui on and to use
1580 only .messages instead of messages. Hopefully this fixes bug
1582 kes Fix seg fault in exit of acquire when canceling a job --
1583 reported by Wolfgang Denk
1584 kes Pull in latest reservation system changes from 1.38
1585 kes Make .messages command always print messages regardless
1586 of the automessages flag.
1588 kes Fix seg fault if user labels a drive directory bug #513
1589 kes Remove quotes around Version as it breaks things.
1591 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1592 kes Apply sparse code fix for raw drives and fifos. Bug 506
1593 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1595 kes Correct reservation system to do a last ditch try
1596 for any mounted volume, then anyone anywhere.
1597 kes Add quotes around table Version because of
1598 error in MySQL 4.1.15 -kes bug report submitted.
1599 kes Correct some minor problems with btape in the fill
1601 kes Updates to ssh-tunnel from Joshua Kugler.
1602 kes Added a report.pl program from Jonas Bjorklund.
1603 kes Simplify the O_NONBLOCK open() code for tape drives,
1604 and always open nonblocking.
1605 kes Do not wait for open() if EIO returned (shouldn't happen).
1606 kes Eliminate 3 argument to tape open().
1607 kes Correct the slot # edited in the 3995 Bad autochanger unload
1609 kes With -S on bscan (show progress) do not divide by zero.
1611 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1612 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1613 kes Remove unused code in wait_for_device.
1614 kes Make wait_for_device() always return after 60 seconds of wait.
1618 kes Add stubs for non-crypto build.
1620 kes Use localhost if no network configured
1622 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1623 kes Remove debug print.
1624 kes Add bail_out in error during state file reading.
1626 kes Merge changes made to 1.38.3 into HEAD
1627 kes Add stubs for pygtk-console code
1628 kes Create Makefile.in for pygtk-console code
1630 kes Merge updates into 1.38 branch
1631 kes Update specs to include mysql4 define.
1632 kes Fix when attributes are sent, must be after binit().
1633 kes Stop read_record() if status not ok in second loop.
1634 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1635 and partial records in read_record(). This allows bscan
1636 to get FileIndex at EOT correct.
1637 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1639 kes Fix Win32 built to work with new crypto code.
1640 kes Apply patch supplied by user (slightly modified) to fix
1641 correct detection of holes in block devices and FIFOs.
1643 kes Apply patch supplied by user (slightly modified)
1644 to fix SD hang with multiple pools and bad client
1645 IP. Fixes bug # 508.
1647 kes Add nagios plugin to the examples directory. Submitted by
1649 kes Remove warning message about multiple saves of hardlinked files
1650 from find_one.c as it can generate too many warning messages.
1651 kes Modify most restore error messages to be queued so that they
1652 appear at the end of the job rather than mixted with the restore
1653 listing where they could be 'lost'.
1655 kes Reset timeout values before select() per patch from
1656 Frank Sweetser for problems with non-blocking sockets.
1657 kes Unlink the state file if either reading or writing it gets
1658 errors. Hopefully this will fix Win32 exit problems.
1659 kes Add sanity check in append.c to ensure that dcr is not NULL.
1660 This can happen if multiple drive autochanger SCSI control
1661 channel and drive indicies do not correspond.
1663 kes Get next volume from Scratch pool before creating a volume.
1664 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1665 kes Remove argument from create_bacula_database for SQLite as it
1667 kes Add back index code so that two drive autochangers can get
1669 kes Change a bunch of debug levels to aid debugging autochangers.
1670 kes Fix reservation so that mutexes are properly applied.
1671 kes Rework reservation algorithm so that two drives can be used
1674 kes Landon merged his data encription changes into the HEAD
1675 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1676 If this patch is applied, the number of days can be specified with
1677 'list nextvol days=xx'
1679 'status dir days=xx'
1680 My use case is to be able to preview the next scheduled job (and the
1681 next tape to be used) on fridays if there are no scheduled jobs during
1685 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1686 kes Fix malformatted bnet error message that caused seg fault
1688 kes Applied user patch to improve README.vc8 in src/win32.
1690 kes Add Migrate, Copy, Archive Job types (some where there)
1691 kes Correct some more editing of JobId's (for 64 bit compatibility).
1692 kes Ensure that StorageId is stored in Media record when ever possible.
1693 kes Add Migration Job to Job.
1694 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1695 Next Pool to Pool resource.
1696 kes Add more code to mac.c (migration archive copy).
1697 kes Change Start Storage daemon job to require read and write storage
1699 kes Pass read storage data to SD as well as write storage data.
1700 kes Remove old code from winservice.cpp
1701 kes Break on error in scan.
1702 kes Fix typo in signal.c
1703 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1704 kes Cleanup how find_device() works.
1705 kes Add read output to Status in SD.
1708 kes Add red-black btree routines
1710 kes Remove abs() in bfile.c so that it compiles on Solaris.
1713 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1714 kes Fix bnet-server bug found on OpenBSD. Bug #486
1715 kes Fix cancel failure bug. Bug #481
1716 kes Fix failure when Pool name has spaces. Bug #487
1717 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1718 kes Fix a couple of free()s in src/filed/acl.c
1719 kes Fix memory overrun in bfile.c in building OS X resource
1720 fork filename. Bug #489
1721 kes Add Pool name to SD status output.
1723 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1724 kes Make sure to set storage before trying to set drive.
1725 kes Add bacula_mail_summary.sh to examples directory. It makes
1726 a single email summary of any number of jobs. Submitted
1728 kes Make sure when we do a mount to unblock the device even
1729 if the drive could not be opened.
1731 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1732 and correct a few minor problems to make it build on Linux.
1734 kes Remove delete of CVS from all Makefiles
1735 kes Fix seg fault when clicking on Add button in wx-console
1736 restore panel. Bug #470.
1737 kes Fix copyright date and URL typo -kes bug #468.
1738 kes Change autostart install for FreeBSD to look for rc.conf
1739 rather than rc.local as suggested fix for bug #466.
1740 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1741 grant on status. Bug #465
1742 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1743 update script. Bug #464
1744 kes Tweak #ifdefing a bit in new Win32 stream code.
1745 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1746 kes Add documentation of performance #defines
projects / bacula / bacula / blob