1 Technical notes on version 1.39
5 ebl Add support of encrypted data stream to bscan.
6 display data_len instead of data content (may be binary)
8 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
9 bcopy. Fixes bug #669 reported by Eric.
10 kes Fix incorrect number of arguments in SQL statement in
11 sql_get.c as reported by Eric.
13 kes Update examples directory.
14 kes Remove unused variable in winservice.cpp
15 kes Make Win32 make command build installer.
17 kes Correct dvd code that breaks tape labeling.
18 kes Implement Enabled on update slots.
20 kes When doing a label, pass the VolBytes back to the Director,
21 which puts it in the catalog.
22 kes Print an error message if the user attempts to prune an
24 kes Need to start using %ld when sscanfing 32 bit values.
26 kes Correct the counting of VolCatBytes for DVDs.
27 kes Add code to mount.c to require that VolCatBytes corresponds to
28 what is actually found when doing an append.
29 kes Update freespace only after writing on the DVD.
30 kes Remove code that blows away the current part in the spool file.
32 kes Apply new dvd-handler patch from Richard Mortimer.
33 kes Tweak so that debug level 20 shows only DVD commands.
34 kes Correct spooled_part flag in dev.c close() so that it is cleared
35 when the spool file is deleted or does not exist.
36 kes Print part number in read_records when eof hit (restore).
38 kes Make find with no args in tree restore return error rather than
39 stopping the selection. Fixes bug #665
40 kes Rework DVD writing to ensure that the last part is written
41 on open_next_part when dealing with a spool file.
42 kes Correct the lseek_dev() routine to handle end point correctly
43 (bug introduced by me).
44 kes Allow part number to exceed num_dvd_parts in lseek_dev().
46 kes Apply dvd-handler patch from Richard Mortimer.
47 kes Apply dvd error check patch from Richard Mortimer.
48 kes Apply bpipe race patch from Richard Mortimer.
49 kes Rework how DVD labels are handled and set append only
50 when part > num_dvd_parts.
52 kes Rework many features of DVD writing and reading. Added many error
53 messages. Most importantly changed part to represent the current
54 part number base zero. This makes current DVD writing incompatible
55 with previous version.
57 kes Add host:port to connect failure messages to FD and SD from Dir.
58 kes Add WhereACL to console ACL list. If nothing is specified, only
59 the default is permitted for restore. Otherwise, *all* allows any
60 path, or you can specify permitted paths. This should allow control
61 over where users can restore files. This is untested.
62 kes Modified message to add a ? (as in loaded?) when querying the autochanger
63 for what Slot is loaded.
64 kes Fixed the use of Slot, so that is more correctly maintained, thus
65 eliminating unneeded duplicate calls to determine what Slot is loaded.
68 kes Install man pages with 'make install'
69 kes wx-console crashes because of differences between Bacula and wxWidgets
70 malloc()/free(). Tweek wx-console to use bmalloc()/bfree() for Bacula
72 kes correct improper indenting in wx-console/console_conf.c
73 kes update wx-console header copyrights
74 kes Fix bug #658 where wx-console mangles file/directory names containing
77 kes Add Media.Enabled flag to client backups for dotcmds.c
78 kes Enforce Media.Enabled=1 for a current restore to work.
79 kes Require restore case 3 to have sqlquery permission to work.
80 kes Remove obsolete del_MAC sql command.
81 kes Ensure that bscan creates Volumes with Enabled=1.
83 Version 1.39.20 beta released:
85 kes Correct missing Client table reference in SQL pointed out by
88 kes Fix Win32 build (new entrypoint, start baculafd).
90 kes Add -n option to bconsole to turn off conio.
91 kes Print JobIds to be migrated in Job Report.
92 kes Add additional user supplied notes to the messages part of
93 bacula-dir.conf concerning multiple email addresses.
94 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
95 kes Add more recent Feature requests to Projects file.
97 kes Apply Maritn's fix to src/win32/Makefile.
98 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
99 kes Implement pruning for Migration and migrated jobs.
100 kes Implement PoolOccupancy migration.
101 kes Implement PoolTime migration.
103 kes If doing a mount, look for a slot, and if specified pass it to
104 the SD so that it can load the autochanger.
105 kes Return DVD=1 flag if a label command is done to a DVD. This
106 permits setting VolParts to 1.
107 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
108 rework ua_label code based on DVD media type to use DVD flag returned.
110 kes Eliminate some compile warnings in dird_conf.c
111 kes Format the bytes field in the terminated jobs part of the status
112 command for the three daemons with suffixes to reduce print size
113 of backup bytes. Suggested by a user.
114 kes When not descending into a directory, print the File= name that
115 triggered it -- makes why not descending a bit clearer.
116 kes Do not unload autochanger when doing a list command -- basic code
117 from Eric Bollengier.
119 kes Fix bug #462 incorrect error message printed when client script called
120 from File= was not found.
121 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
122 do a rewind on Solaris when no tape is in the drive (Solaris does not
123 have the detailed errno found on Linux). Added Solaris specific code.
124 Note, this may apply to other OSes as well.
126 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
127 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
128 fix bug 648 - update sqlite script patches, lock out gnome2console
129 builds for platforms with gtk+ < 2.4.
130 Updated build_rpm.sh - add remote source directory, add switch for
131 signing, refine file names.
132 Updated spec file again for Mandriva build as they have this curious
133 custom of silently converting all manpages to bzip2 format just before
134 the final packaging step.
136 rbn Fixed the Windows Makefiles so that they won't accidently try and
137 pickup binaries for the Unix build. This allows both the Unix
138 build and the Windows build to be built in the same tree without
139 interfering with each other.
140 rbn Fixed error handling and cleaned up mtx-changer.cmd.
141 rbn Added the rest of the database scripts. These are installed but are
142 not yet editted for variable replacement.
143 rbn Broke out the cats functionality from bacula.dll and put into new
144 separate dlls for each database type. At installation time the
145 correct one is copied to bacula_cats.dll.
146 rbn Eliminate the need to install the mysql.dll on client only builds.
147 rbn Moved dird/sql_cmds.c into the cats directory so all the database
148 specific #ifdefs were in the cats directory.
149 rbn Added a new sql_cmds.h with all the declarations for the variables
150 exported from sql_cmds.c.
151 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
152 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
154 kes Correct improperly formated list command output reported by Dan.
156 kes Correct despool time calculation.
158 kes Remove previous changes to compat.cpp as they create problems.
159 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
160 kes Attempt to fix problems with the msg_queue crashing on Solaris
161 when Bacula is terminating, but problems remain.
162 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
163 name editing problems with too many \\?\es.
164 kes Fix some Bacula source code stlye problems in compat.cpp.
165 kes Add debug code to compat.cpp and convert non-Bacula debug code
168 kes Change the name of the technical notes file from kes-1.39 to
169 technotes-1.39. Prefix my messages with 'kes '.
170 kes Allow dequeue_messages() to be called twice. Should fix bug
172 kes Add Job type to bscan Job information output.
174 kes Update copyright date in program files, and for the most part
176 kes Implement %q in bsnprintf.c apparently I forgot it.
178 kes Make disk-changer sed command compatible with FreeBSD.
179 kes Make a first cut at a ReleaseNotes and ChangeLog for a
181 kes Make make clean decend into the src/win32 directory.
182 kes Fix some #ifdefing so that Solaris and FreeBSD compile
183 sys/stat.h was turned off.
184 kes Use suffix editing for new transfer rate messages.
185 kes Attempt to come up with a workaround which seems to be an OS
186 bug where write() returns EBUSY. IMO this should not happen.
187 It triggered in truncatebug test. The workaround retries using
189 kes Eliminate a strerror() call in a class method that failed with
191 kes Use rm -rf rather than rmdir to delete the src/win32/release
192 directory during make clean.
194 kes Make bscan ignore ACL streams.
195 kes Update projects files with new Feature Requests.
196 kes Generate current English and French manuals and upload
198 kes Update the home page to include the new British/French flags to
199 switch between translations. Work done by Alexandre Baron.
200 kes Make disk-changer script print an error message if the changer
201 directory is not defined.
202 kes Create a generic DB routine for getting an int (32/64 bit) from
204 kes Add more migration code.
205 kes Add a few more files to .cvsignore here and there.
206 kes Minor fixes for SD write rate and despooling rate.
207 kes Turn off new test code in src/console.c
211 kes Incremented the version number to signify that all of Robert's code
212 for Win32 that was in the branch is now integrated into the HEAD,
213 and that Eric has submitted code that we hope will provide limited
214 backward compatibility with 1.38 file daemons (more testing to be
216 kes I rationalized a few of the names of the variables (mainly jcr names)
217 that are used during migration as keeping three different jcrs at the
218 same time clear in one's head is not easy.
222 eb Tweak new runscript feature to work with 1.38.x FDs.
223 eb Correct crypto.c to fix segfault when restoring an encrypted stream
224 on fd which don't use rsa keys.
225 eb Add yes/no english keywords on localised yes/no questions.
227 kes Several important commits from Robert Nelson for code cleanup and
229 kes Modify console.c so that when conio is enabled, it converts \n to
230 \n\r before outputting to the console. Hopefully this will fix
231 the problems with expect in Perl that Eric saw.
233 kes Change cats/sql.c to elimate %-*s format, which I think is turned
235 kes Add Comment field to llist of a volume.
236 kes Allow true/false in some yes/no questions.
237 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
238 kes Remove a few /n's when scanning commands from another daemon. This
239 permits adding additional fields later.
240 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
241 kes Update README.mingw
243 kes Tweak authentication to work with 1.38.x FDs.
244 kes Tweak catalog make scripts.
245 kes Fix catalog upgrade scripts so that they work.
246 kes Correct despooling debug code to eliminate race condition.
248 kes Add additional fields as specified by Arno to LocationLog.
249 kes Add comment field to the Media record.
250 kes Add Time field to the Log record.
251 kes Correct migration SQL (thanks to Bill Moran) so that it
252 runs with PostgreSQL also.
253 kes Add spooling/despooling info in status output of SD.
255 kes Spend a lot of time integrating mkcdrec with the rescue disk.
256 kes Add VOLMGMT message class for volume management messages (none yet).
257 kes Add CATALOG as a destination. It goes into the LOG table.
258 kes Implement the Log table in the DB.
259 kes Implement the Location Log table in the DB (for user use).
260 kes At Eric's request add a run_scripts() just after blast_data in
263 kes Add Enabled column to Location, correct some typos in DB schemas.
264 kes Correct bug I introduced into RunScripts enum.
265 kes Add log table to Catalog
266 kes Purge original job migrated if the migration terminates normally.
267 kes Cleanup purging of files/jobs so that it is done only in a
269 kes Add new VOLMGMT message class.
270 kes Add Catalog message destination (user conf code remains to be written).
272 kes Modify read_record and friends to properly deal with migration
274 kes Update debug code in read_record.
276 ======================= Warning ==========================
277 Separate read and write storage in Jobs in the Director. This
278 is a major rewrite of some of the low level code and hence has
279 a high probability of introducing bugs.
280 ==========================================================
282 kes Move the job init code up to *before* the job is put into
283 the job queue (resource allocation queue). This permits the
284 job to establish whether it will read or write or do both.
285 kes Add name() methods to all the resource classes.
286 kes Implement separate read and write storage resource
287 allocation/deallocation in jobq.c
289 ======================= Warning ==========================
290 Implemented new method of getting the default Storage from the Media
291 record rather than from the MediaType for restore. As a fall
292 back, if no Storage is defined, use the MediaType. This
293 eliminates most all prompts if there are multiple MediaTypes
294 used. This is an important and fundamental change.
295 ==========================================================
297 kes Add more detail (Storage, Device) to list of volumes printed
299 kes More code in migrate. In particular start multiple jobs if
301 kes Probably overkill, but ensure that the bsr is unique even within a
303 kes Rework bsys.c drop() so that it now should work as expected.
304 kes Update a bunch of old copyrights -kes particularly in .h files.
305 kes Remove src/lib/bshm.c/h
309 ======================= Warning ==========================
310 All hash codes in the database are now kept in world
311 compatible base64 format (no = filling). This means that
312 all FileSets will be updated and if you are running
313 verify jobs, you must do an InitCatalog.
314 Authentication uses the new algorithm, but should be
315 backward compatible with 1.38.x
316 ===========================================================
318 kes Modify the authentication routines so that the 1.39.15 Director
319 always runs with the compatible binary to base64 code (same as
320 the rest of the world). It will however detect if an SD or
321 FD is running the old code and if that is the case, will use
322 the old algorithm for authentication. However, all consoles must
323 use the compatible algorithm, and all data entered into the database
324 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
325 use the compatible algorithm.
326 kes Rename the cram_md5 routine names to be slightly more appropriate
327 to what they are doing (challenge and respond).
328 kes Robert committed his #ifdef and header cleanup.
330 kes Fix a complier warning in files/backup.c
331 kes Cleanup NOT NULL vs DEFALT 0 in database creation.
333 kes Robert committed his low impact changes.
334 kes I removed a size_t from the jcr.h definition.
335 kes Update the tape regression scripts (still to be tested).
336 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
337 kes Require done or quit to exit from in memory tree restore.
339 kes Write install/uninstall of new manpages. There are now a
340 pile of man pages. Some of which need a lot of work.
342 ======================= Warning ==========================
343 The --mandir ./configure option now points to the top level
344 man directory. The man files will be installed under
345 mandir/man8 and mandir/man1 as appropriate.
346 ==========================================================
348 kes Add complete text of GPL to LICENSE.
349 kes Implement job report that indicates where Storage and Pool
350 came from -kes with overrides and Pool storage and NextPool,
351 it is all very complicated.
352 kes Create a few common subroutines for backup.c and migrate.c
353 kes Eliminate warning messages from tray-monitor.c
355 kes Apply fix for scheduler for missing unlock_jobs().
356 kes Clean out autoconf caches before rebuilding configure
357 kes Fix the FreeBSD pthreads lib define updated by Dan.
358 kes Add missing semicolon in src/console/console.c
359 kes Add Robert's enhanced version of build-win32-cross-tools
360 as well as his patch file.
361 kes Note, the new gcc options are likely to break building of
362 wx-console or the tray-monitor ...
364 kes Implement Robert's suggestion to suppress printing compile lines.
365 kes Detect GCC correctly (I hope)
366 kes If using GCC (actually g++) add the following compiler flags
367 -fno-strict-aliasing -fno-exceptions -fno-rtti
369 ===================== Warning =============================
370 Turn on new bsnprintf() code. This could cause print output
372 ===========================================================
374 kes Fix crypto when not using openssl. I previously overlooked this.
375 kes Eliminate crypto type punning problems by eliminating void * and
376 using uint8_t * instead.
377 kes Harden authentication failure in FD by single threading errors
378 and forcing a 6 second wait.
380 ===================== Warning =============================
381 Removed "Accept Any Volume" directive.
382 ===========================================================
384 kes Major cleanup and simplification of regress using shell functions
385 (more tests to be converted to new format)
386 kes Add detection of 64 bit Irix as indicated by user.
387 kes Increment catalog database id from 9 to 10.
388 kes Add a few of the new database fields to the various C++
390 kes Implement code to fill in the most important new fields (e.g.
392 kes Ensure that most of the new fields are in create/get/insert/update.
393 More work to be done.
395 kes Update some very old licenses in src/cats.
396 kes Modify the database format for handling Migration jobs:
397 Add PriorJobId, RealEndTime to Job table
399 Remove Stripe from JobMedia record (not used, wasting space)
400 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
401 Add Cost to Location table.
402 kes Delete mac_record subroutines.
403 kes Add new table values to create/update/get routines as appropriate.
404 kes Update the update_tables and make_tables scripts.
405 kes Make a first cut in using a union where multiple pointers (actually
406 pointers to pointers) are stored.
407 kes Make some changes to base64.c suggested by Robert and others and add
408 a small amount of documentation.
409 kes Add some changes suggested by Peter for Solaris (bregex...)
410 kes Make runscript.h always built because it needs to be pulled into
411 more places. In particular its RES was left out of a union.
412 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
413 This makes it slightly easier to detect uninitialized variables.
415 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
416 sometimes creates install problems.
417 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
418 Nelson's code. More to do.
419 kes Convert a few store_bit to store_bool in filed_conf.c.
420 kes DVD tweak to block.c as supplied by Uwe Muessel.
422 kes Modify configure.in to check for typeof().
423 kes In findlib/attribs.c use typeof instead of templates if possible.
425 kes Implement partial error messages for src/filed/acl.c
426 kes Fix return code to fail when doing update barcodes and
427 Pool resource is not found. This previously caused Volumes
428 to be labeled as cleaning tapes.
429 kes Small updates to projects.
431 kes Add Eric Bollengier patch for new RunScript directive. It breaks
432 compatibility between dird and fd.
434 kes Prevent DVD code from rewriting label if the device cannot be
436 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
437 fix Debian build bug.
438 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
439 kes Integrate manpages contributed by Jose Luis.
440 kes Update projects file.
441 kes Add manpages Makefile.in to configure.in
442 kes Remove installation of bacula.8 in scripts directory.
444 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
446 O_NOATIME is a open() flag which makes it possible to read a file without
447 updating the inode atime (and also without the inode ctime update which
448 happens if you try to set the atime back to its previous value). It also
449 prevents a race condition when two programs are reading the same file, but
450 only one does not want to change the atime. It's most useful for backup
451 programs and file integrity checkers (and bacula can fit on both
454 Recent versions of the Linux kernel and glibc have support for it (the
455 glibc support being mostly copying the O_NOATIME definition to
456 bits/fcntl.h). If there's no support for it on the kernel, trying to use
457 it does nothing (since the kernel ignores unknown flags).
459 If the kernel has support for it, trying to use it either works, fails
460 silently (mostly in remote filesystems), or returns errno=EPERM (if you
461 are not either the owner of the file or root). A simple way to prevent the
462 failure is to open the file without the flag and set it later with
463 fcntl(F_SETFL), ignoring any EPERM errors.
464 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
465 of restarted jobs to complete (due to a destroyed pthreads conditional
466 variable used by the message thread).
467 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
469 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
470 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
471 colons in query.sql file.
472 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
473 not to create orphans.
474 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
475 in restore long listing.
476 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
477 of incorrect MarkedId.
478 kes Apply patch from adioso bug #616 to correct text in manual (replace
479 Director with File daemon).
480 kes Rework a few of the zlib changes so that they build properly.
483 kes Move DIR "run" command to SD before starting the message thread
484 as suggested by Cristopher Hull to avoid a race deadlock from
485 two threads using the bsock structure.
486 kes Modify LICENSE to correct some problems pointed out by Debian.
488 kes Correct EOF with no \n lex.c problem.
489 kes Tweak compat.h compat.cpp and merge with apcupsd
490 kes Add additional INFO messages if autochanger cannot be used.
493 kes Simplify Win32 Makefile
494 kes Correct count of buffers/bytes used by smartall.c
495 kes Updated compat.h after porting apcupsd to MinGW.
497 kes Work on getting wx-console building on MinGW. wxWidgets now builds
498 started adding Makefile ...
499 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
501 kes Reloading a bad configuration file doesn't kill director any more.
502 Thanks to fix from Eric Bollengier.
504 kes Fix problem of accents with new Win32 code.
505 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
506 works in the MinGW build with the exception that there
507 is a problem with accented characters -kes i.e. there is
508 some mapping problem with wide characters.
509 kes The code no longer compiles with Microsoft VC++.
511 kes Start implementing Christopher's St.Bernard code.
512 kes Add Christopher's mods for opening files.
513 kes Strip \r \n from Win32 error messages (Christopher)
514 kes Add more info about Win32 system if unknown (Christopher)
515 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
516 kes Fix a number of incorrect strings marked for translation, when
517 they should not be (e.g. commands).
518 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
519 Patches supplied by user in bugs #608 and #599.
520 kes Use most recent of st_ctime and st_mtime in restore tree DIR
521 listing. This fixes some problems with Win32 printing incorrect
523 kes Correct the clock shift comm time calculation between the DIR
524 and the FD. It was added rather than subtracted.
525 kes Strip all backslashes in filenames to be restored on Win32
526 machines -kes the names should all be in Unix format, and if
527 there are any backslashes it is most likely due to an improper
528 FileSet definition, and the files will not otherwise be
530 kes Remove lib/regex.c (replaced by bregex.c).
531 kes Delete src/win32/License.txt
532 kes Modify installer to install LICENSE
534 kes Fix bug in build-win32-cross-tools script reported by Howard
535 kes Implement cross compiled bconsole
537 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
538 kes Write first cut of README.mingw32
539 kes Add back ua_label barcode fix from Rufolf Cejka.
540 kes Integrate the majority of the Mingw cross-tools submission
541 made by Howard Thomson. Everything compiles, with zlib, openssl,
542 and VSS turned off. Linking needs a pthreads library ...
544 kes Add 'Dir Status' button to the gnome console.
545 kes More work on migration.
546 kes Restore non-compatible base64 coding to permit compatibility.
547 kes Display heap stats in Storage daemon without debug level.
549 kes Integrate most of the MinGW changes -kes more to do.
551 kes Implement using pg_config for finding PostgreSQL files.
552 Fixes bug #600. Patch supplied by user.
553 kes Remove -t option from mktemp in mtx_changer.in and use
554 working directory. Fixes bug #578.
555 kes Update job start time after the any run before job so that
556 files created by the script are only backed up once. Fixes
558 kes Strip trailing newline only from filenames entered in
559 the restore command when reading a file. This permits
560 the user to enter filenames with trailing spaces. Fixes
561 bug #549. The user supplied a patch that I modified slightly.
562 kes Use the most recent time (st_mtime, st_ctime) in the dir
563 command in restore. This gives the user a better idea of what
564 the newest file really is. This fixes bug #574. The fix
565 was suggested by the user.
566 kes Implement a compatible version of base64. This permits external
567 programs to duplicate Bacula's base64 algorithm using standard
568 routines. This fixes bugs #296, and 565. Patch submitted by
570 ================= Note ========================
571 Previous Signatures stored in the database are no longer
572 compatible with this. The main downside is for Verify jobs,
573 and doing an InitCatalog run will fix the problem. Also, the
574 authentication between the deamons is changed, so all daemons
575 must be simultaneously upgraded.
576 ==============================================
577 If you don't like this fix, set:
578 const bool compatible = true;
580 const bool compatible = false;
583 kes Ensure that DB signature is never NULL.
584 kes Ensure that DB table names are not translated.
585 kes Fix scheduler to handle time skew (eg daylight savings).
586 kes Fix scheduler to use lock_jobs() to avoid most problems
587 with reload. Window is now milliseconds.
589 kes Apply patch from Christopher Hull
590 kes Allow multiple connections to database with different
592 kes Invalidate the scheduler when doing a reload. Fixes seg
593 fault, but still 60 second window.
594 kes Additional info in Reschedule message.
595 kes Use set_jcr_job_status() everywhere to prevent loss of
597 kes Display peer IP in FD if error from connecting DIR.
598 kes Don't increment file count for DIRBEGIN.
599 kes Replace illegal characters in Win32 filename by _.
600 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
601 kes Hash hard link filenames rather than linked list.
602 kes Fix for security failure in chdir on Win32.
603 kes Add CreateDirectoryA/W win32 API entry points.
604 kes Add /silent option to Win32 FD for Install/Remove service.
605 kes Always print Heap statistics in FD.
607 kes Remove the -f option from the chown in Makefile.in for more
609 kes Change setting the group in Makefile.in to use chgrp for
611 kes Implement a write_store and read_store to replace
612 dirstore in reserve.c
613 kes Implement a Bacula read/write lock for Python rather
614 than using the Python lock to avoid recursive problems.
615 kes Correct the uninstall directory names in filed/Makefile.in
616 as reported by a user.
618 kes Correct some problems with database creation (new tables).
619 kes Replace a bunch of old 0x%x by %p.
620 kes Get first cut of Migration with Job selection working.
622 kes Change store_bit() to store_bool() for the Spooling in
623 dird_conf.c -kes bug reported by Robert Nelson.
625 kes Correct Makefile bug found by Dan Langille.
627 kes Correct Makefile for Solaris /bin/sh
628 kes Correct mtx-changer.in for Solaris /bin/sh
629 kes Abort if a conf resource does not have a Name =
631 kes Change the name of the regex program to bregex.
632 kes Add the bwild program to the tools directory. It is similar
633 to the bregex program.
634 kes Implement create bregex.h and bregex.c in src/lib from the
635 Python regexp program.
636 kes Use the new bregex.c to implement Regex expressions on Win32.
638 kes More work on migration.
639 kes Implement wild program in tools directory for testing
640 wild-cards. Almost identical to the regex program.
641 kes Up port VSS single thread locking code.
642 kes Replace N_(..) by NT_(...) to inhibit translation of
644 kes Modify Makefile to change the permissions on Working Directory
645 to 770 if the directory is created.
646 kes Do not fail the Makefile if changing the permissions or
647 owner/group on WorkingDir fails.
648 kes Remove early selection of Scratch Volumes in the recycling
650 kes Correct the old recycling algorithm so that Scratch Volumes
651 are selected when looking for a Volume in the changer.
652 kes Correct a typo in the Verify SQL reported by Joe Park.
654 kes Remove automatic case folding on Windows FDs. You must
655 explictly use the 'Ignore Case = yes' option.
656 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
657 scratch volume in an Autochanger early in the 'recycling'
660 kes Make weof() and clrerror() methods of class DEVICE.
662 kes Tweak license to include Microsoft restrictions.
663 kes Move mysql.reconnect to after real_connect(). Thanks to
664 Frank Sweetser for the patch.
665 kes Disallow a backslash in a File = directive (Windows junk)
666 unless the string is quoted.
667 kes Apply Eric's patch to ua_label.c so that daemon protocol
669 kes Add NT_ definition for strings that should not be translated.
670 kes Apply NT_() to ua_label.c
671 kes Remove timed wait for VSS on Win2K3 as it is not yet
673 kes Correct bacula.in script to reference bacula-ctl-xx in the
674 sysconfig directory rather than the bin directory.
676 kes Fix a long standing bug in the bacula start/stop scripts.
677 kes Attempt to add the new bacula-ctl-* files to the rpm.
678 kes Switch to using typeof() for list traversing to avoid
679 as many FC5 g++ compiler warnings as possible.
681 kes Split the bacula start/start script into four files:
682 bacula -kes starts and stops calling other scripts
683 bacula-ctl-dir -kes starts/stops the director
684 bacula-ctl-fd -kes starts/stops the File daemon
685 bacula-ctl-sd -kes starts/stops the Storage daemon
687 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
688 kes Correct editing of JobId from int to int64 in fd_cmds.c
689 kes Eliminate FileSet name race with bash_spaces() and multiple
690 threads by bashing in a local.
691 kes Fix error return from 'use storage' to print a correct error
692 message rather than nothing.
693 kes Correct false re-read last block error message when two jobs
694 are simultaneously writing at the end of a tape.
695 kes Simplify exit conditions in the reserve.c code to avoid
696 possible non-release of reservation_lock().
697 kes Suffle lock order in reserve to avoid deadlock between
698 reservation lock and device mutex.
700 kes Initialize jcr mutex before first use. Thanks to Thorsten for
701 tracking this down for me !!!! as it broke the Win32 build.
703 kes Integrate addition of line count limitation to bsmtp -l from
704 Sebastian Stark <stark at tuebingen.mpg.de>
706 kes Implement regex test program in tools directory.
707 kes Attempt to fix time problem with bsmtp with foreign langs.
708 kes Add strip_trailing_newline() submitted by user.
709 kes Implement regex matching in migrate.c
711 kes Fix bug #537 to allow arbitrary time to mount a volume for
712 restore, if polling is turned on.
713 kes If dir_user or dir-group is specified in ./configure apply it to
714 the working-dir. Fixes bug #533.
715 kes If rescheduling a job cancel the previous incarnation with the SD.
716 Fixes bugs #566 and 557.
717 kes Fix bug #567 do_message() definition type conflict.
720 kes Add more jcr methods and make mutex and use_count private.
721 kes Create lock/unlock methods for jcr.
722 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
723 records to get to seek position.
724 kes Integrate patch from bug #561 to correct conio.c signal definitions.
725 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
726 terminates correctly by doing pthread_kill(). Do not destroy
727 SD cond wait variable between executions of the job. Use local
728 mutex for cond variable to avoid blocking jcr chain. Fix poor
729 use of jcr use count in jobq.c for restarted jobs.
730 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
731 lib/jcr.c -kes prevents locking the jcr chaing.
732 kes Apply patch from bug #564, which corrects listing volumes with
733 multiple autochangers. Apply same fix to next volume list.
734 kes Fix bug #562 where restore bootstrap file is not unique.
735 kes More details in implementing David's migration syntax proposal.
736 kes Save and restore dcr when swapping drives so that if we have
737 a write dcr it is not lost.
738 kes Use new routine lock_reservations() to lock the reservations
739 system, and call it while looking for a volume in askdir.c.
740 This could possibly fix bug #543.
741 kes Stop SD command loop if job is canceled.
744 kes Remove old code from findlib/create_file.c
745 kes Rename mac.c migrate.c
746 kes Add user friendly display of VolBytes in job report.
747 kes Rename target... to previous... to make it a bit easier to
749 kes Add selection type and selection pattern to Migration (idea
750 given by David Boyes).
753 kes The po files should now be current.
754 kes Fix new sql_use_result() code to properly release the
755 buffers in all cases.
756 kes Use the keyword ujobid to mean the unique job id; job or jobname
757 to mean the Job name given on the Name directive, and jobid to
758 be the numeric (non-unique) job id.
759 kes Allow listing by any of the above.
760 kes Add the user friendly job report code for reporting job elapsed time
761 and rates with suffexes from John Kodis <kodis at comcast.net>.
762 kes Add Priority and JobLevel as Python settable items.
763 kes Use TEMPORARY table creation where the table is created by
765 kes Add new code submitted by Eric for waiting on specific jobid.
766 kes Add ACL checking for the dot commands.
767 kes Fix restore of writable FIFOs.
768 kes Fix a bug in bpipe where the string was freed too early.
770 kes Modify the Python class examples to inherit object -kes new way
771 of defining classes. Patch from Felix Schwarz.
772 kes Implement jobuid to replace old usage of job in keywords as
773 suggested by Eric Bollengier.
774 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
775 wait (wait for all jobs to stop)
777 wait jobuid=unique id
779 kes Implement write variables for Python to set Priority (anytime), and
780 Job Level, only during JobInit event.
782 kes Fix the block listing bug pointed out by Arno.
783 kes Update the po files at Eric's request.
785 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
786 accept time qualifiers.
787 kes Make catalog respect ACL.
788 kes Add recycle count to Media record.
790 Changes to 1.39.6-beta1 24Feb04
792 kes Add Rudolf Cejka's new rc-chio-changer.
793 kes Implement pulling Volume from Scratch Pool if the
794 Volume is in the autochanger.
795 kes Implement additional command arguments for update Volume.
799 kes Back port changes to 1.38.5
800 kes Fix recycle SQL for StorageId.
801 kes Fix misplaced quote in mtx-changer script.
803 kes Note. Your database must be updated, or you must create
804 a new database. I have not yet incremented the database level.
805 kes Add Location table.
806 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
808 kes Implement create/get mac record in database for adding extended
809 Migration data to the job record.
810 kes Add new MAC table to update/make database scripts.
811 kes Return Storage name used when getting VolumeNames for a job.
812 kes Change bsr file keyword Storage to Device, which is more accurate.
813 kes Ensure that Mac records are pruned/purged.
814 kes Tweak SD tools to deal with changing media type.
815 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
816 kes Pass pointer to dcr pointer to acquire_device_for_read() so
817 that the subroutine can switch devices, and hence dcrs.
818 kes Modify the multiple MediaType read code to re-use the same
819 dcr when switching devices. This makes the code much more
821 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
822 from a table for restore.
823 kes Add Storage name to VolParams, but it really should be Device.
825 kes Add disk-changer to scripts directory + configure/Makefile
826 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
827 kes Implement store_bit scanner to replace store_yesno. Mostly done.
828 kes Implement new store_bool that stores in a bool.
829 kes Add true/false to yes/no conf directives.
830 kes Make first cut at changing appropriate store_yesno to store_bool.
831 kes Complete implementation of Pool storage devices.
832 kes Move starting clones to job.c
833 kes Move create_restore_bootstrap_file() to job.c
834 kes Make copy_storage() more general to be able to handle
836 kes Cleanup a lot of migration code for manual running, including
838 kes Move getting a scratch Volume into a subroutine.
839 kes Make all places a Volume that is added to a pool to
841 kes Fix bug in autochanger recycle code (improper edit 64 bit).
842 kes Fix segfault in restore command when no value specified.
843 kes Start adding code to handle multiple MediaTypes in restore.
844 kes Eliminate race condition in getting Volume name for
845 two drive autochanger.
846 kes More debug code in autochanger.
847 kes Add storage keyword to bootstrap file, add parsing.
848 kes Move slot in bsr file into Volume record as there will be
849 a different slot for each Volume.
852 kes Implement Pool storage overrides.
854 kes Implement first cut of Migration.
855 kes Implement mysql_use_result() from patch by Karl Hakimian.
856 This reduces significantly the memory consumption during
857 the restore tree building, and hence runs faster too.
858 kes Implement StorageId patch supplied by user (reggie) in bug
859 #536. This should permit Bacula to work correctly with two
861 kes Implement Job listing variations suggested by a user.
862 kes Move updating bootstrap code in backup.c to subroutine
863 update_bootstrap_file().
864 kes Add new job status elapsed time and bytes written user
865 friendly job report output patch sent by John Kodis
866 <kodis at comcast.ne>.
867 kes Implement a storage list in Pools.
868 kes Separate out setup_job() code from run_job().
869 kes Get migration working -kes lots of changes in mac.c in both
871 kes Apply patch from user (Eric Bollengier I think) that fixes a
872 DIR crash when no arguments are supplied to a dot command.
873 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
874 kes Fix command arg name->volume in label command of gnome-console.
875 kes Fix SD acquire.c to release correct DCR by explicitly testing
876 on the dcr address rather than trying to devine if it is a read
877 or write dcr. This failed in error conditions when the device was
881 kes Apply user supplied patch for more readable rate output
883 kes Continue implementing migration.
884 kes Implement support for removable filesystems in SD.
885 kes Ensure that btraceback scripts can be read by anyone.
886 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
887 kes Correct bug where canceling restore before the FD contacts
888 the SD causes the drive to be left in read mode.
889 kes Move ofline_or_rewind into DEVICE::close().
890 kes Eliminate close_device.
891 kes Convert several dev subroutines to methods (e.g. bsf,
893 kes Eliminate force_close_device().
894 kes Implement Device Type directive in Device resource that
895 can have values File, Tape, Fifo, DVD, or Prog.
896 kes Add has_cap() method to Device.
899 kes Add patch from bug #527 to allow RedHat user to specify
900 options/user/group for starting each daemon in
903 kes Add two new queries to query.sql provided by Arno. One
904 list volumes known to the Storage device, and the other
905 lists volumes possibly needing replacement (error, ...).
907 kes Add periodic (every 24 hours) garbage collection of memory
908 pool by releasing free buffers.
910 kes Correct bug counting sized (for display only) in smartall.c
911 kes Print FD mempool stats if debug > 0 rather than 5.
913 kes Make db_lock() mutex error fail the job rather than abort
914 Bacula. Canceling the job caused the mutex to fail.
915 kes Correct bug in alist.c that re-allocated the list if the
916 number of items goes to zero.
917 kes Move the reservation system thread locking to the top level
918 so that one job at a time tries all possible drives before
920 kes Implement a reservation 'fail' message queue that is built
921 and destroyed on each pass through the reservation system.
922 These messages are displayed in a 'Jobs waiting to reserve
923 a drive' list during a 'status storage='. Note, multiple
924 messages will generally print for each JobId because they
925 represent the different problems with either the same drive
926 or different drives. If this output proves too confusing
927 of voluminous, I will display it only when debug level 1
928 or greater is enabled in the SD.
930 kes Add enable/disable job=<job-name>. This command prevents
931 the specified job from being scheduled. Even when disabled,
932 the job can be manually started from the console.
933 kes During 'update slots' clear all InChanger flags where the
934 StorageId is zero (old Media records).
938 kes Fix autochanger code to strip leading spaces from returned
939 slots number. Remove bc from chio-changer.
940 kes Back port a bit of 1.39 crypto code to reduce diffs.
941 kes Fix first call to autochanger that missed close()ing the
942 drive. Put close() just before each run_program(). Fixes
945 kes Add PoolId to Job record when updating it at job start time.
947 kes Pull in more code from 1.39 so that there are fewer file
948 differences (the new ua_dotcmds.c, base64.h, crypto.h
949 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
950 util.c. Aside from ua_dotcmds.c these are mostly crypto
952 kes Implement new method of walking the jcr chain. The
953 incr/dec of the use_count is done within the walking
954 routines. This should prevent a jcr from being freed
955 from under the walk routines.
960 kes Start implementing Verify list output.
961 kes Move the suitable_drive flag to a better place to prevent
962 premature termination of the reservation if all drives
963 are busy -kes should fix Arno's diff/inc pool failures.
965 kes Add mutex to single thread VSS code in Win32.
967 kes Simplify code in askdir.c that waits for creating an appendable
968 volume so that it can handle multiple returns from the wait
970 kes Modify the wait code to permit multiple returns.
971 kes Return a zero when "autochanger drives" is called and
972 it is not an autochanger.
973 kes Make rewind_dev() a method taking a DCR as an argument.
974 This permits closing and reopening the drive if the
975 rewind fails as happens if the drive was loaded while the
976 file descriptor was open. This refreshes the file descriptor.
977 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
978 if the device is open or not. This should eliminate
980 kes Return error if reserve cannot find at least one suitable device.
981 kes Make wait_for_sysop() return correct state information.
982 kes Fix Win32 state file problem. write was not using compat
983 code. This should fix bug #500.
985 kes Modify gui on command to set only GUI mode and not batch.
986 kes Modify .messages command to always print messages regardless
988 kes If GUI mode is on, suppress automatic printing of
990 kes Delete old bnet packet code.
991 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
992 wx-console. -kes not implemented because bconsole must be updated.
993 kes Modify restore command in wx-console to set gui on and to use
994 only .messages instead of messages. Hopefully this fixes bug
996 kes Fix seg fault in exit of acquire when canceling a job --
997 reported by Wolfgang Denk
998 kes Pull in latest reservation system changes from 1.38
999 kes Make .messages command always print messages regardless
1000 of the automessages flag.
1002 kes Fix seg fault if user labels a drive directory bug #513
1003 kes Remove quotes around Version as it breaks things.
1005 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1006 kes Apply sparse code fix for raw drives and fifos. Bug 506
1007 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1009 kes Correct reservation system to do a last ditch try
1010 for any mounted volume, then anyone anywhere.
1011 kes Add quotes around table Version because of
1012 error in MySQL 4.1.15 -kes bug report submitted.
1013 kes Correct some minor problems with btape in the fill
1015 kes Updates to ssh-tunnel from Joshua Kugler.
1016 kes Added a report.pl program from Jonas Bjorklund.
1017 kes Simplify the O_NONBLOCK open() code for tape drives,
1018 and always open nonblocking.
1019 kes Do not wait for open() if EIO returned (shouldn't happen).
1020 kes Eliminate 3 argument to tape open().
1021 kes Correct the slot # edited in the 3995 Bad autochanger unload
1023 kes With -S on bscan (show progress) do not divide by zero.
1025 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1026 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1027 kes Remove unused code in wait_for_device.
1028 kes Make wait_for_device() always return after 60 seconds of wait.
1032 kes Add stubs for non-crypto build.
1034 kes Use localhost if no network configured
1036 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1037 kes Remove debug print.
1038 kes Add bail_out in error during state file reading.
1040 kes Merge changes made to 1.38.3 into HEAD
1041 kes Add stubs for pygtk-console code
1042 kes Create Makefile.in for pygtk-console code
1044 kes Merge updates into 1.38 branch
1045 kes Update specs to include mysql4 define.
1046 kes Fix when attributes are sent, must be after binit().
1047 kes Stop read_record() if status not ok in second loop.
1048 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1049 and partial records in read_record(). This allows bscan
1050 to get FileIndex at EOT correct.
1051 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1053 kes Fix Win32 built to work with new crypto code.
1054 kes Apply patch supplied by user (slightly modified) to fix
1055 correct detection of holes in block devices and FIFOs.
1057 kes Apply patch supplied by user (slightly modified)
1058 to fix SD hang with multiple pools and bad client
1059 IP. Fixes bug # 508.
1061 kes Add nagios plugin to the examples directory. Submitted by
1063 kes Remove warning message about multiple saves of hardlinked files
1064 from find_one.c as it can generate too many warning messages.
1065 kes Modify most restore error messages to be queued so that they
1066 appear at the end of the job rather than mixted with the restore
1067 listing where they could be "lost".
1069 kes Reset timeout values before select() per patch from
1070 Frank Sweetser for problems with non-blocking sockets.
1071 kes Unlink the state file if either reading or writing it gets
1072 errors. Hopefully this will fix Win32 exit problems.
1073 kes Add sanity check in append.c to ensure that dcr is not NULL.
1074 This can happen if multiple drive autochanger SCSI control
1075 channel and drive indicies do not correspond.
1077 kes Get next volume from Scratch pool before creating a volume.
1078 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1079 kes Remove argument from create_bacula_database for SQLite as it
1081 kes Add back index code so that two drive autochangers can get
1083 kes Change a bunch of debug levels to aid debugging autochangers.
1084 kes Fix reservation so that mutexes are properly applied.
1085 kes Rework reservation algorithm so that two drives can be used
1088 kes Landon merged his data encription changes into the HEAD
1089 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1090 If this patch is applied, the number of days can be specified with
1091 "list nextvol days=xx"
1093 "status dir days=xx"
1094 My use case is to be able to preview the next scheduled job (and the
1095 next tape to be used) on fridays if there are no scheduled jobs during
1099 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1100 kes Fix malformatted bnet error message that caused seg fault
1102 kes Applied user patch to improve README.vc8 in src/win32.
1104 kes Add Migrate, Copy, Archive Job types (some where there)
1105 kes Correct some more editing of JobId's (for 64 bit compatibility).
1106 kes Ensure that StorageId is stored in Media record when ever possible.
1107 kes Add Migration Job to Job.
1108 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1109 Next Pool to Pool resource.
1110 kes Add more code to mac.c (migration archive copy).
1111 kes Change Start Storage daemon job to require read and write storage
1113 kes Pass read storage data to SD as well as write storage data.
1114 kes Remove old code from winservice.cpp
1115 kes Break on error in scan.
1116 kes Fix typo in signal.c
1117 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1118 kes Cleanup how find_device() works.
1119 kes Add read output to Status in SD.
1122 kes Add red-black btree routines
1124 kes Remove abs() in bfile.c so that it compiles on Solaris.
1127 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1128 kes Fix bnet-server bug found on OpenBSD. Bug #486
1129 kes Fix cancel failure bug. Bug #481
1130 kes Fix failure when Pool name has spaces. Bug #487
1131 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1132 kes Fix a couple of free()s in src/filed/acl.c
1133 kes Fix memory overrun in bfile.c in building OS X resource
1134 fork filename. Bug #489
1135 kes Add Pool name to SD status output.
1137 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1138 kes Make sure to set storage before trying to set drive.
1139 kes Add bacula_mail_summary.sh to examples directory. It makes
1140 a single email summary of any number of jobs. Submitted
1142 kes Make sure when we do a mount to unblock the device even
1143 if the drive could not be opened.
1145 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1146 and correct a few minor problems to make it build on Linux.
1148 kes Remove delete of CVS from all Makefiles
1149 kes Fix seg fault when clicking on Add button in wx-console
1150 restore panel. Bug #470.
1151 kes Fix copyright date and URL typo -kes bug #468.
1152 kes Change autostart install for FreeBSD to look for rc.conf
1153 rather than rc.local as suggested fix for bug #466.
1154 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1155 grant on status. Bug #465
1156 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1157 update script. Bug #464
1158 kes Tweak #ifdefing a bit in new Win32 stream code.
1159 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1160 kes Add documentation of performance #defines
projects / bacula / bacula / blob