1 Technical notes on version 1.39
5 kes Update projects file for next vote.
6 kes Implement a fix (more could be done) for bug #728 where a double
7 EOF is writing on the Volume when spooling is enabled and the
8 connection with the FD fails (FD crash, comm error).
9 kes Disable attempting to autolabel when polling and device is not
10 a tape. This fixes bug #730 where polling with a removable disk
11 not mounted caused lots of new Volumes to be created then marked
14 kes Enable VSS by default.
16 kes Complete hopefully the last of the copyright transfer changes.
17 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
18 that migration writing to multiple volumes doesn't mess up reading
19 Volumes. This should fix bug #720 -- multivol migration fails.
20 kes Make migration SQL look only for Type='B' jobs to migrate. This should
21 fix bug #724 jobs getting migrated twice.
22 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
23 kes Implement dev->clear_cap() and dev->set_cap() methods.
24 kes Turn off disk seeking on restore for DVDs since I am not 100%
27 kes Implement code that should properly set that a job was migrated,
28 if the migration was successful even if there were no file to
30 kes Apply Richard's patch to fix building or filed/restore.c without
32 kes Ensure that at least one block is written by the SD even if the
33 FD dies or fails -- should fix bug #728.
34 kes Convert stored/record.c ASSERT into a soft fail if the length of
35 a record is too insanely long. This should fix bug #???
37 kes Fix automatic labeling of File volumes, which was broken by new
38 removable device code.
40 kes Remove typedef uLong for HP in baconfig.h. It broke things.
41 lf Fix job byte reporting -- the digest code runs in verify.c and
42 increases this value. The better solution is to digest the
43 stream as we receive it, thus removing the need to re-read
44 from disk at all, but that requires more extensive and
45 potentially destabilizing changes.
46 lf This commit fixes backup and restore of HFS+ resource forks.
47 lf Add a long-missing 'break' statement in HFS+ attribute
48 handling that resulted in restore failures.
50 ebl Fix runscript to always execute command after all job type.
52 Version 1.39.30 released:
54 kes Mark build-depkgs-mingw3 executable in configure process.
55 kes Update autoconf/config.h.in to include LOCALEDIR
56 kes Undefine NLS settings for wxWidgets as there is a conflict with
57 their way of doing things.
58 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
59 kes Change a bunch of ->hdr.name to ->name()
60 kes Straighten out handling of read and write pools for Migration, including
61 getting the code in the proper order.
62 kes Improve migration error messages and debug output.
63 kes Shorten code path in migration if nothing found to do.
64 kes Implement read/write pool in migration job report.
65 kes Move ua_run.c select_job_level code into a subroutine (readability).
66 kes Move ua_run.c display_job_parameters into a subroutine.
67 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
68 restore dependent on a valid catalog containing the Volume name.
70 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
71 make it easier for the user to change.
72 kes Fail any backup job that tries to use encryption and sparse options.
73 Hopefully this is a temporary change.
74 kes Correct the EndJob return string for non-backup jobs.
75 kes Review the encryption restore code.
76 kes Implement a new encryption regression test with compression.
77 kes Modify migrate not to fail if nothing found to migrate.
78 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
79 because they were not always set correctly.
81 kes Update configure.in to include python 2.5 search.
82 kes Back out unwanted migration change reported by Richard Mortimer.
84 kes Make migration with no files to migrate set normal termination.
85 kes Change message when job manually started to say Job queued. ...
86 kes Add job report indication of whether or not VSS and Encryption were
88 kes Modify sparseBlock variable name to make the code clearer.
89 kes Add more sparse tests to regress using gigaslam sparse file
91 kes Enable data encryption code.
92 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
93 only two blocks -- i.e. it is a real sparse file.
95 kes Enable disk seeking on restore.
96 kes Implement the SD 'Block Positioning = yes|no' directive. This
97 allows the user to turn off block level seeking, but restores
99 kes Change the word illegal to read invalid in a few places.
100 kes Fix Win32 build, which broke when I added parse_args_only in
101 lib. I'm not sure I got the entry point right for msvc.
102 kes Turn off data encryption. It can be enabled by defining
103 DATA_ENCRYPTION in src/version.h and recompiling.
104 kes Implement flag to turn off data encryption feature.
105 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
107 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
108 The main problem was that signatures were being generated on blocks
109 of zeros, which is unnecessary.
111 kes Fix scanner (next_arg) to handle leading double quote correctly.
112 kes Modify cd command in restore tree to look at full argument without
113 keywords. This fixes bug #716.
115 kes Do not update Migrated Job type if migration does not terminate
116 normally. This fixes bug #719.
117 kes Update ReleaseNotes
118 kes Purge Job records from the catalog for Migration. This was
119 not properly done previously. This fixes bug #718.
121 kes Initialize msg_type to M_INFO in migration. Pointed out by
123 kes Add some fflush() statements for debug output. This should not
124 really be necessary and defeats buffering but users continue
127 kes More copyright changes.
128 kes Make sure we don't detach from the despool read device since it
129 is a temporary structure where the condition variables are not
130 initialized. Bug #711.
132 kes Add Bacula version+date to Client record. This is a very minor
133 security problem in that passing the version facilitates a hacker's
134 life, but it will make support easier.
135 kes Implement fixes to make disk seeking work. Currently turned
136 off in version.h pending reserch on what problems it will cause
137 because of the previous bsnprinf() sign extension bug.
139 kes Add Landon's refactor of restore Feature request to the
141 kes Tweak debug levels and messages for examining the disk
144 kes Cleanup some of the error termination code in migration.
145 kes Separate read/write source strings to keep track of where
146 storage devices are used in a job.
147 kes Implement a new method of keeping track of which storage
148 device is used in a Job. USTORE keeps both a pointer to the
149 resource and to the source string.
150 kes Modify all code to use new storage set subroutines in job.c
151 kes Modify migrate.c so that the definitive selection of the storage
152 resource is done in the do_migration_init() routine prior to
153 the job going into the job queue. This permits accurate
154 deadlock detection (same read and write storage resource).
155 kes Remove bfill from btape (I think it was a left over stub).
157 kes Make sure that the storage for a job is pulled first from
158 the Pool and if not from the Job.
159 kes Ensure that either the Pool or the Job specifies a Storage
162 kes Start applying new FSFE copyright.
164 kes Add additional error messages in acquiring a drive for read.
165 kes Make WritePartAfterJob the default so that the last DVD part
166 always gets written to the DVD by default.
167 kes Add additional error messages in migration.
168 kes Suppress redundant error messages in migration (possibly more to do).
169 kes Apply Martin's fix (updated to 1.39) that takes into account
170 run storage overrides in the Director status display.
171 kes Implement, but turn off the submitted code that sets the EOT
172 model on FreeBSD machines. Turning on this code is too risky at
173 this point in the development.
175 kes Implement unique dbid routine for migration to prevent the same
176 JobId from being migrated twice. This should fix bug #709.
178 kes Apply Jaime Ventura's 'mail on success' patch.
179 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
180 if memory usage gets too big.
181 kes Tweak migration to ensure that read/write devices are different.
183 kes Create an AUTHORS file to list Bacula contributors.
184 kes Add Richard Stallman's four GPL freedoms to LICENSE
185 kes Require the conf file to have a valid NextPool for writing the
188 ebl Enable RecycleCount in catalog.
189 ebl Fix "echo python | bconsole" segfault
191 kes Implement code to pass the MediaId to the SD. The SD then uses
192 this MediaId when creating JobMedia records. This fixes a bug
193 with Migration where the MediaId got set to the second Volume
194 read rather than the write Volume. Possibly (unlikely) fixes
196 kes Remove NextPool from Job resource.
197 kes Edit a few numbers in the restore dialog with commas.
198 kes Note, the DIR<->SD protocol has changed.
200 kes Replace () by {} in configure.in for proper HP configuration.
201 kes Shorten some lines over 80 characters in filed/backup.c
202 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
204 Version 1.39.28 released:
206 kes Change error message 'illegal' to 'invalid' -- bug #707
207 kes Add rather primitive device resource deadlock detection in
208 the job queue handler. It detects the same read and write device
209 for migration and cancels the job.
210 kes Start adding a unique_dbid_hander() routine in migration to avoid
211 duplicate mediaids and duplicate jobids.
212 kes Add patch from bug #708 to permit relative paths such as ../xxx
213 in the restore tree routine.
214 kes Add Eric Bollengier's patch to reduce locking time in the SD after
215 despooling, and thus many jobs finish faster.
216 kes Correct locking order of reservations lock and device mutex in
217 reserve.c -- this should correct Arno's deadlock that occurred
218 when doing mount/unmount at the same time a job is reserving a
221 rbn Fixed problems with encryption when combined with compression
222 or sparse files. Unfortunately this means that all previous
223 encrypted backups can't be restored.
224 rbn Fixed problem in bfgets with Windows and Mac end of lines.
225 rbn Fixed bug in Windows version of close_bpipe() that cause programs
226 like bsmtp() to hang waiting for the pipe to be closed. Fixed
227 binary file type problems in open_bpipe().
228 rbn Fixed a number of bugs in the mysql DB scripts.
230 ebl Fix broken runscript on director. (RunBefore, RunAfter)
231 ebl Use M_ERROR instead of M_FATAL in runscript.c
233 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
234 rbn Ignore UTF-8 marker at the start of .conf files.
235 rbn Add stab2cv to 3rd party dependencies. This is a utility I
236 wrote that is licensed under the GPL and available on SourceForge.
237 It converts the stab debugging info generated by gcc into Codeview
238 format. Currently it just translates function names to global
239 symbols. This is sufficient to get reasonable stack traces from
240 Dr Watson and to look at minidumps.
241 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
242 rbn Enable Windows XP look and feel for the tray icons and wx-console.
243 rbn Add Windows specific FileSet example to bacula-dir.conf.
244 rbn Reorganize Start menu so that documentation and configuration are
247 rbn Change daemons and utilities so that if -c is omitted from the
248 command line AND there is no configuration file in the current
249 directory then the 'standard' configuration file (eg
250 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
251 doesn't contain any path separators AND there is no configuration
252 file by that name in the current directory then the 'standard'
253 configuration file directory will be searched for a file by that
255 rbn Fixed restore on Windows so that backslashes as path separators works.
256 rbn Add missing query.sql file to Windows installer.
257 rbn Fixed Windows versions of catalog backup scripts.
259 kes Fix optional files in Makefile.in of src/filed that caused
260 a syntax error when using no optional files.
262 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
263 messages; there is no reason to attempt to load a private key.
264 from master key files.
266 Version 1.39.26 released:
268 kes Apply the three patches from Richard Mortimer.
269 bacula-reposition.patch, bacula-tape-reopen.patch, and
270 bacula-eod.patch. This corrects tape positioning on older devices,
271 and also a problem with btape.
272 kes Apply fix from bug report #696 where writing to a FIFO does not
273 work due to a dumb typo.
274 kes Unlock the tape door before the file descriptor is released. This
275 should fix lots of somewhat subtle failures when using an autochanger.
277 kes Correct mtx-changer bug that I introduced in a recent commit, and
278 pointed out by Robert Nelson -- thanks.
279 rbn Fix Windows' daemons so that messages print to stdout if not
280 running as a service.
281 rbn Add daemon name to trace file name (eg bacula-dir.trace).
282 rbn Fix environment variable expansion in directory names on Windows.
283 rbn Fix autochanger support in fill command.
284 rbn Update SQL scripts to match Unix versions.
285 rbn Fix daemon usage displays.
286 rbn Cleanup bacula-dir.conf template.
287 rbn Install openssl.cnf so that the openssl.exe installed in the
288 Bacula\bin directory can be used to generate keys and
289 certificates for TLS and encryption.
290 rbn Fix cleanup of spool files on Windows.
291 rbn Remove /silent option from daemons on Windows. The new default
292 is the same as the old /silent. To enable the message boxes that
293 previously were suppressed by /silent you must add /debug instead.
294 NOTE: As a result of this change, the first time you upgrade from
295 a previous version of 1.39.x you will receive the message
296 boxes when the remove of the old services succeeds. This
297 is the same behaviour as when migrating from a version prior
299 However, going forward, these message boxes will not appear on
300 upgrades or new installs.
301 rbn Add new /debug option. This option enables the message boxes that
302 previously were suppressed by the /silent option. In addition the
303 daemons running as services will open a console window if this
305 rbn Fix bug with service not being removed on migrated installs. This
306 should correct those cases where the file daemon install was failing
307 when upgrading from versions prior to 1.39.x.
309 kes Turn on heap reporting in Dir with zero debug level.
310 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
311 send the same message to stdout.
313 kes Begin work on new GUI 'console'.
314 kes Make configure look in non-standard MySQL library directory
316 kes Make mtx-changer automatically configure the autochanger wait
317 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
319 kes Correct drop_sqlite_tables.in script to not delete the database.
320 kes When writing to a log file, close and reopen the file descriptor
321 if there is an error writing the file.
322 kes Modify the autochanger loaded?, load, and unload commands to print
323 the full text of any mtx output if there is an error. Helps to
324 ease diagnosis of autochanger problems.
325 kes Correct a few Win32 errno returns in the VSS code so that hopefully
326 a resonable Win32 error message will be printed.
327 kes Convert a few strcat()... to bstrncat() in the Win32 code.
329 rbn Added Windows version of bsmtp.
330 rbn Fixed path search for Windows so that Bacula\bin is automatically
331 searched for programs and scripts.
332 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
335 Version 1.39.24 released:
337 kes Apply dvd find volume patch from Richard Mortimer.
338 kes Eliminate the dvd specific mount routines using only the
340 kes Make update_free_space a method of DEVICE and rename
343 kes Require a messages command acl to be able to receive messages
345 kes Add console, system, and scan job types in util.c.
347 kes Print the Volume purged message only for real jobs to keep
348 from cluttering up the daemon messages.
349 kes Lock the tape drive door while Bacula is using the device.
350 kes Add back the 'No Jobs running' message to FD and SD status because
351 my regression script depends on it, and I'm too lazy to change the
353 kes Start using structure assignments (not too happy about it ...).
354 kes Fix a bug in the tools Makefile that broke on Solaris.
355 kes Unload any autochanger drive during a 'release' command.
357 kes Enhance error message when restoring without bootstrap file.
358 kes Check restored size only for regular files.
359 kes Store Python job level in job record in Dir.
360 kes Add back code to open tape device nonblocking, but if rewind fails
361 release file descriptor.
362 kes Modify acquire.c to first try autoloading the device. Also, ask operator
363 to mount tape if drive cannot be opened.
364 rbn Made Windows service tray status windows resizable.
365 rbn Fixed horizontal scrolling of text in status window.
366 rbn Preserve horizontal and vertical scroll position while
367 updating. This prevents the display being reset to the
368 top line every 5 seconds.
369 rbn Fix Windows cross-compile compatibilty problems with
370 *nix variants such as OS X without the zic command.
371 rbn Eliminate dependency on man2html.
373 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
375 kes Fix a compiler warning in compat.cpp
376 kes Change strcpy to bstrncpy in compat.cpp
377 kes Remove some broken code in bdb_list.c
378 kes Fix, hopefully the last, ACL problem in the restore command.
379 kes Update the README.mingw32
380 kes Add new version of upgrade-win32-client.txt to examples directory.
381 Submitted by Michel Meyers.
382 kes Print an INFO message in the job report when a Volume is marked Purged.
383 rbn Fixed handling of external program and script execution
384 so that the format of the command line is more flexible.
385 Now executable path names containing spaces are translated
386 to the equivalent short name automatically. The result is
387 passed to cmd.exe with the quotes removed.
389 kes Apply the recycle patch from Richard Mortimer.
390 kes Convert a few if statements in dev.c to switch statements.
391 kes Start using print_errmsg instead of bstrerror().
392 kes Print a job message in SD when a job is marked to be canceled.
394 kes All code added back. Fixed block.c read/write to loop only 3
395 times. This apparently keeps the OS from crashing (at least
397 kes The kernel bug still persists. Backup something then immediately
398 do a bscan on the same tape, and the kernel will crash.
399 kes Simplifed tape open(). It no longer uses nonblocking mode, which
400 means that opening with no tape loaded will probably take at least
401 6 minutes before an error is reported.
402 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
403 when doing set_os_device_parameters.
404 kes Report open error in mount.c
405 kes Remove all .exe files from the installer directory on make clean.
407 kes Start adding back removed code.
408 kes Back out a number of changes because backups to tape crash my
410 kes Remove the inetd code from the File daemon.
412 kes Add -c option to pg_dump so that it initializes tables when
414 kes Fix FirstWritten time on Volume to be obtained from SD so that
415 it is the actual time the volume was first written.
416 kes Minor Makefile changes.
417 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
418 ebl Add yes keyword to prune/purge command
420 kes Correct a test in block.c that prevented restore of a DVD from
421 looking at the last part in the spool directory.
422 kes Make some error messages clearer mostly by using the word DVD
423 in the message. Improve infor message in read_record for DVDs.
424 kes Remove DVD kludges in dircmd.c label/relabel.
425 kes Move the dvd relabel code from dircmd.c into
426 write_new_volume_label_to_dvd() adding a relabel argument.
427 kes Rewrite the truncate_dvd() code to be much simpler and
428 more logical. First blow away any spool part, then create a
429 new empty part and write to the DVD.
430 kes Rewrite the can_write_on_non_blank_dvd() code making it
431 only ensure that no valid data is on the DVD -- i.e. it
434 kes Minor Makefile fixes.
435 kes Put attach_dcr_to_dev in a subroutine.
436 kes Make attaching/detaching to/from a device use a flag and
437 only detach if actually attached.
438 kes Add dvd-simulator.in to scripts directory and add to configure.
439 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
440 This could be a cause of a number of drive reservation problems.
441 Note, this code is now in attach_dcr_to_dev().
442 kes Suppress doing Volume updates if it is a system job. This should
443 prevent the DVD label blocking.
444 kes Clear the freespace ok flag in a couple of strategic places.
446 kes Put removing zero sized spool part file in subroutine and
447 call from release_device().
448 kes Add Richard's patch for relabel to dircmd.c, but save and restore
450 kes Rework a lot of subroutines in dev.c to take dcr as an
451 argument. This is done to eliminate the usage of attached_dcrs
453 kes Change truncated_dvd to blank_dvd, which seems more suitable.
454 kes Apply most of Richard Mortimer's truncate patch.
455 kes Create lseek() method for DEVICE that takes dcr as an
456 argument. This is to eliminate the use of attached_dcrs in
457 lseek(). The calls to lseek_dev() must still be changed.
459 kes Apply Richard Mortimer's patches for printing an error
460 message in btape when a DVD is used, and to initialize traceback.
461 kes Added error message to btape when trying to access a file.
462 kes Move prototype of update_slots() to protos.h.
464 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
465 and FDJobStatus to the Director Python variables.
466 kes Make sure valid argument passed to str_to_utime() where Arno
468 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
469 I.e. part of two different patches.
471 kes Modify disk changer to simulate some of the error conditions
473 kes Make sure the close() call in the SD tools is just before the
475 kes Implement dir_get_volume_info() in bls using the patch from
476 Richard Mortimer but call find_num_dvd_parts().
477 kes Implement find_num_dvd_parts() that mounts and scans a DVD
478 and counts the parts.
479 kes Move the omode code in open_dvd() up so that the cannot
480 write on blank disk can check can be bypassed for read mode.
483 kes Disable normal data spooling for DVD writing which uses
484 a different spooling mechanism.
485 kes Apply patch from Richard Mortimer to ensure that the number
486 of DVD parts is correctly updated.
487 rbn Save installer details log in the Bacula directory as
489 rbn Add installer generation of client and storage templates
490 suitable for @inclusion on the director.
491 rbn Mark previously installed Win32 components read-only since
492 deselection doesn't do anything.
494 Version 1.39.22 beta released:
496 kes Fix logic error in handling error return from mtx-changer
498 kes Make status from SD aware of -1 (unknown) Slot status.
499 kes At Eric's suggestion make both the 'slots' and 'drive' commands
500 to the Storage daemon work even if the drive is busy.
501 kes Make two separate Win32 menu links for starting bconsole and
502 wx-console in winbacula.nsi
503 kes Apply DVD part_spooled patch from Richard Mortimer
504 richm@oldelvet.org.uk
505 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
506 rbn Fixed problems migrating settings from previous releases in
507 Win32 installer. Add Readme.txt with an option to show it on
508 the installer Finish page.
510 kes Use get_catalog_resource() to open catalog database
511 to ensure that ACLs are respected and that user is
512 correctly prompted for database.
513 kes Integrate multiple console/director patch from
514 Carsten Paeth calle@calle.in-berlin.de
515 ebl Add character substitution in Job/JobDefs WriteBootStrap.
516 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
517 kes Apply patch supplied in bug #656 to pass priority field
518 in the run dialog to the Director in gnome console
519 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
520 this will fix bug #627 where Bacula eventually gets
521 confused about what Volume it wants.
522 kes Add a new close_part() class in the SD to save the device
523 state around open/close_part/open for DVD writing. This
524 should fix the num_dvd_parts getting zeroed as reported by
526 kes Apply patch from Richard Mortimer that correct edit code
527 for debug output of st_size.
528 ebl Add support of encrypted data stream to bscan.
529 display data_len instead of data content (may be binary)
531 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
532 bcopy. Fixes bug #669 reported by Eric.
533 kes Fix incorrect number of arguments in SQL statement in
534 sql_get.c as reported by Eric.
536 kes Update examples directory.
537 kes Remove unused variable in winservice.cpp
538 kes Make Win32 make command build installer.
539 rbn Add new Install Type page, used to select between Automatic
540 and Custom installs. Automatic installs only prompt for
541 configuration items that can't be reasonably defaulted.
542 rbn Added Bacula logo to page headers.
543 rbn Added Upgrade support
544 - Configuration and component selection are migrated from
546 - Configuration of upgraded components is preserved and
548 - Configuration of new components is handled according to
549 the Automatic / Custom selection.
550 - Component selection is defaulted to previously selected
552 rbn Installation of Server components is disabled on
553 Windows 95, 98 and ME.
554 rbn Added URLs for support, info and upgrades to Bacula entry
555 in Add/Remove Programs.
556 rbn Added Version info to Bacula entry in Add/Remove Programs.
558 kes Correct dvd code that breaks tape labeling.
559 kes Implement Enabled on update slots.
561 kes When doing a label, pass the VolBytes back to the Director,
562 which puts it in the catalog.
563 kes Print an error message if the user attempts to prune an
565 kes Need to start using %ld when sscanfing 32 bit values.
567 kes Correct the counting of VolCatBytes for DVDs.
568 kes Add code to mount.c to require that VolCatBytes corresponds to
569 what is actually found when doing an append.
570 kes Update freespace only after writing on the DVD.
571 kes Remove code that blows away the current part in the spool file.
573 kes Apply new dvd-handler patch from Richard Mortimer.
574 kes Tweak so that debug level 20 shows only DVD commands.
575 kes Correct spooled_part flag in dev.c close() so that it is cleared
576 when the spool file is deleted or does not exist.
577 kes Print part number in read_records when eof hit (restore).
578 rbn Installer default changed to start services on new install.
580 kes Make find with no args in tree restore return error rather than
581 stopping the selection. Fixes bug #665
582 kes Rework DVD writing to ensure that the last part is written
583 on open_next_part when dealing with a spool file.
584 kes Correct the lseek_dev() routine to handle end point correctly
585 (bug introduced by me).
586 kes Allow part number to exceed num_dvd_parts in lseek_dev().
587 rbn Change make_session_key on Windows to use WIN32 APIs to produce
589 rbn Add new tool scsilist.exe which displays the changer, tape and
590 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
591 to add them to bacula-sd.conf.
593 kes Apply dvd-handler patch from Richard Mortimer.
594 kes Apply dvd error check patch from Richard Mortimer.
595 kes Apply bpipe race patch from Richard Mortimer.
596 kes Rework how DVD labels are handled and set append only
597 when part > num_dvd_parts.
599 kes Rework many features of DVD writing and reading. Added many error
600 messages. Most importantly changed part to represent the current
601 part number base zero. This makes current DVD writing incompatible
602 with previous version.
604 kes Add host:port to connect failure messages to FD and SD from Dir.
605 kes Add WhereACL to console ACL list. If nothing is specified, only
606 the default is permitted for restore. Otherwise, *all* allows any
607 path, or you can specify permitted paths. This should allow control
608 over where users can restore files. This is untested.
609 kes Modified message to add a ? (as in loaded?) when querying the autochanger
610 for what Slot is loaded.
611 kes Fixed the use of Slot, so that is more correctly maintained, thus
612 eliminating unneeded duplicate calls to determine what Slot is loaded.
614 kes Install man pages with 'make install'
615 kes wx-console crashes because of differences between Bacula and wxWidgets
616 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
618 kes correct improper indenting in wx-console/console_conf.c
619 kes update wx-console header copyrights
620 kes Fix bug #658 where wx-console mangles file/directory names containing
623 kes Add Media.Enabled flag to client backups for dotcmds.c
624 kes Enforce Media.Enabled=1 for a current restore to work.
625 kes Require restore case 3 to have sqlquery permission to work.
626 kes Remove obsolete del_MAC sql command.
627 kes Ensure that bscan creates Volumes with Enabled=1.
629 Version 1.39.20 beta released:
631 kes Correct missing Client table reference in SQL pointed out by
634 kes Fix Win32 build (new entrypoint, start baculafd).
636 kes Add -n option to bconsole to turn off conio.
637 kes Print JobIds to be migrated in Job Report.
638 kes Add additional user supplied notes to the messages part of
639 bacula-dir.conf concerning multiple email addresses.
640 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
641 kes Add more recent Feature requests to Projects file.
643 kes Apply Maritn's fix to src/win32/Makefile.
644 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
645 kes Implement pruning for Migration and migrated jobs.
646 kes Implement PoolOccupancy migration.
647 kes Implement PoolTime migration.
649 kes If doing a mount, look for a slot, and if specified pass it to
650 the SD so that it can load the autochanger.
651 kes Return DVD=1 flag if a label command is done to a DVD. This
652 permits setting VolParts to 1.
653 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
654 rework ua_label code based on DVD media type to use DVD flag returned.
656 kes Eliminate some compile warnings in dird_conf.c
657 kes Format the bytes field in the terminated jobs part of the status
658 command for the three daemons with suffixes to reduce print size
659 of backup bytes. Suggested by a user.
660 kes When not descending into a directory, print the File= name that
661 triggered it -- makes why not descending a bit clearer.
662 kes Do not unload autochanger when doing a list command -- basic code
663 from Eric Bollengier.
665 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
666 to build-depkgs-mingw32. It now handles two options -h to display
667 help and -C to reextract the source and apply the patches. The -C
668 option is useful for updating the source after new patches are
670 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
671 This allows updating to new versions without having to modify the
672 script and makes it easier to figure out which packages and which
674 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
675 as build-depkgs-mingw32 except they are built using Microsoft Visual C
676 and placed in the depkgs-msvc directory. There is also an
677 External-msvc file to describe the packages.
679 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
681 kes Fix bug #462 incorrect error message printed when client script called
682 from File= was not found.
683 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
684 do a rewind on Solaris when no tape is in the drive (Solaris does not
685 have the detailed errno found on Linux). Added Solaris specific code.
686 Note, this may apply to other OSes as well.
688 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
689 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
690 fix bug 648 - update sqlite script patches, lock out gnome2console
691 builds for platforms with gtk+ < 2.4.
692 Updated build_rpm.sh - add remote source directory, add switch for
693 signing, refine file names.
694 Updated spec file again for Mandriva build as they have this curious
695 custom of silently converting all manpages to bzip2 format just before
696 the final packaging step.
698 rbn Fixed the Windows Makefiles so that they won't accidentally try and
699 pickup binaries for the Unix build. This allows both the Unix
700 build and the Windows build to be built in the same tree without
701 interfering with each other.
702 rbn Fixed error handling and cleaned up mtx-changer.cmd.
703 rbn Added the rest of the database scripts. These are installed but are
704 not yet edited for variable replacement.
705 rbn Broke out the cats functionality from bacula.dll and put into new
706 separate dlls for each database type. At installation time the
707 correct one is copied to bacula_cats.dll.
708 rbn Eliminate the need to install the mysql.dll on client only builds.
709 rbn Moved dird/sql_cmds.c into the cats directory so all the database
710 specific #ifdefs were in the cats directory.
711 rbn Added a new sql_cmds.h with all the declarations for the variables
712 exported from sql_cmds.c.
713 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
714 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
716 kes Correct improperly formatted list command output reported by Dan.
718 kes Correct despool time calculation.
720 kes Remove previous changes to compat.cpp as they create problems.
721 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
722 kes Attempt to fix problems with the msg_queue crashing on Solaris
723 when Bacula is terminating, but problems remain.
724 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
725 name editing problems with too many \\?\es.
726 kes Fix some Bacula source code style problems in compat.cpp.
727 kes Add debug code to compat.cpp and convert non-Bacula debug code
730 kes Change the name of the technical notes file from kes-1.39 to
731 technotes-1.39. Prefix my messages with 'kes '.
732 kes Allow dequeue_messages() to be called twice. Should fix bug
734 kes Add Job type to bscan Job information output.
736 kes Update copyright date in program files, and for the most part
738 kes Implement %q in bsnprintf.c apparently I forgot it.
740 kes Make disk-changer sed command compatible with FreeBSD.
741 kes Make a first cut at a ReleaseNotes and ChangeLog for a
743 kes Make make clean descend into the src/win32 directory.
744 kes Fix some #ifdefing so that Solaris and FreeBSD compile
745 sys/stat.h was turned off.
746 kes Use suffix editing for new transfer rate messages.
747 kes Attempt to come up with a workaround which seems to be an OS
748 bug where write() returns EBUSY. IMO this should not happen.
749 It triggered in truncatebug test. The workaround retries using
751 kes Eliminate a strerror() call in a class method that failed with
753 kes Use rm -rf rather than rmdir to delete the src/win32/release
754 directory during make clean.
756 kes Make bscan ignore ACL streams.
757 kes Update projects files with new Feature Requests.
758 kes Generate current English and French manuals and upload
760 kes Update the home page to include the new British/French flags to
761 switch between translations. Work done by Alexandre Baron.
762 kes Make disk-changer script print an error message if the changer
763 directory is not defined.
764 kes Create a generic DB routine for getting an int (32/64 bit) from
766 kes Add more migration code.
767 kes Add a few more files to .cvsignore here and there.
768 kes Minor fixes for SD write rate and despooling rate.
769 kes Turn off new test code in src/console.c
773 kes Incremented the version number to signify that all of Robert's code
774 for Win32 that was in the branch is now integrated into the HEAD,
775 and that Eric has submitted code that we hope will provide limited
776 backward compatibility with 1.38 file daemons (more testing to be
778 kes I rationalized a few of the names of the variables (mainly jcr names)
779 that are used during migration as keeping three different jcrs at the
780 same time clear in ones head is not easy.
784 eb Tweak new runscript feature to work with 1.38.x FDs.
785 eb Correct crypto.c to fix segfault when restoring an encrypted stream
786 on fd which don't use rsa keys.
787 eb Add yes/no English keywords on localized yes/no questions.
789 kes Several important commits from Robert Nelson for code cleanup and
791 kes Modify console.c so that when conio is enabled, it converts \n to
792 \n\r before outputting to the console. Hopefully this will fix
793 the problems with expect in Perl that Eric saw.
795 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
797 kes Add Comment field to llist of a volume.
798 kes Allow true/false in some yes/no questions.
799 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
800 kes Remove a few /n's when scanning commands from another daemon. This
801 permits adding additional fields later.
802 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
803 kes Update README.mingw
805 kes Tweak authentication to work with 1.38.x FDs.
806 kes Tweak catalog make scripts.
807 kes Fix catalog upgrade scripts so that they work.
808 kes Correct despooling debug code to eliminate race condition.
810 kes Add additional fields as specified by Arno to LocationLog.
811 kes Add comment field to the Media record.
812 kes Add Time field to the Log record.
813 kes Correct migration SQL (thanks to Bill Moran) so that it
814 runs with PostgreSQL also.
815 kes Add spooling/despooling info in status output of SD.
817 kes Spend a lot of time integrating mkcdrec with the rescue disk.
818 kes Add VOLMGMT message class for volume management messages (none yet).
819 kes Add CATALOG as a destination. It goes into the LOG table.
820 kes Implement the Log table in the DB.
821 kes Implement the Location Log table in the DB (for user use).
822 kes At Eric's request add a run_scripts() just after blast_data in
825 kes Add Enabled column to Location, correct some typos in DB schemas.
826 kes Correct bug I introduced into RunScripts enum.
827 kes Add log table to Catalog
828 kes Purge original job migrated if the migration terminates normally.
829 kes Cleanup purging of files/jobs so that it is done only in a
831 kes Add new VOLMGMT message class.
832 kes Add Catalog message destination (user conf code remains to be written).
834 kes Modify read_record and friends to properly deal with migration
836 kes Update debug code in read_record.
838 ======================= Warning ==========================
839 Separate read and write storage in Jobs in the Director. This
840 is a major rewrite of some of the low level code and hence has
841 a high probability of introducing bugs.
842 ==========================================================
844 kes Move the job init code up to *before* the job is put into
845 the job queue (resource allocation queue). This permits the
846 job to establish whether it will read or write or do both.
847 kes Add name() methods to all the resource classes.
848 kes Implement separate read and write storage resource
849 allocation/deallocation in jobq.c
851 ======================= Warning ==========================
852 Implemented new method of getting the default Storage from the Media
853 record rather than from the MediaType for restore. As a fall
854 back, if no Storage is defined, use the MediaType. This
855 eliminates most all prompts if there are multiple MediaTypes
856 used. This is an important and fundamental change.
857 ==========================================================
859 kes Add more detail (Storage, Device) to list of volumes printed
861 kes More code in migrate. In particular start multiple jobs if
863 kes Probably overkill, but ensure that the bsr is unique even within a
865 kes Rework bsys.c drop() so that it now should work as expected.
866 kes Update a bunch of old copyrights -kes particularly in .h files.
867 kes Remove src/lib/bshm.c/h
871 ======================= Warning ==========================
872 All hash codes in the database are now kept in world
873 compatible base64 format (no = filling). This means that
874 all FileSets will be updated and if you are running
875 verify jobs, you must do an InitCatalog.
876 Authentication uses the new algorithm, but should be
877 backward compatible with 1.38.x
878 ===========================================================
880 kes Modify the authentication routines so that the 1.39.15 Director
881 always runs with the compatible binary to base64 code (same as
882 the rest of the world). It will however detect if an SD or
883 FD is running the old code and if that is the case, will use
884 the old algorithm for authentication. However, all consoles must
885 use the compatible algorithm, and all data entered into the database
886 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
887 use the compatible algorithm.
888 kes Rename the cram_md5 routine names to be slightly more appropriate
889 to what they are doing (challenge and respond).
890 kes Robert committed his #ifdef and header cleanup.
892 kes Fix a compiler warning in files/backup.c
893 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
895 kes Robert committed his low impact changes.
896 kes I removed a size_t from the jcr.h definition.
897 kes Update the tape regression scripts (still to be tested).
898 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
899 kes Require done or quit to exit from in memory tree restore.
901 kes Write install/uninstall of new manpages. There are now a
902 pile of man pages. Some of which need a lot of work.
904 ======================= Warning ==========================
905 The --mandir ./configure option now points to the top level
906 man directory. The man files will be installed under
907 mandir/man8 and mandir/man1 as appropriate.
908 ==========================================================
910 kes Add complete text of GPL to LICENSE.
911 kes Implement job report that indicates where Storage and Pool
912 came from -kes with overrides and Pool storage and NextPool,
913 it is all very complicated.
914 kes Create a few common subroutines for backup.c and migrate.c
915 kes Eliminate warning messages from tray-monitor.c
917 kes Apply fix for scheduler for missing unlock_jobs().
918 kes Clean out autoconf caches before rebuilding configure
919 kes Fix the FreeBSD pthreads lib define updated by Dan.
920 kes Add missing semicolon in src/console/console.c
921 kes Add Robert's enhanced version of build-win32-cross-tools
922 as well as his patch file.
923 kes Note, the new gcc options are likely to break building of
924 wx-console or the tray-monitor ...
926 kes Implement Robert's suggestion to suppress printing compile lines.
927 kes Detect GCC correctly (I hope)
928 kes If using GCC (actually g++) add the following compiler flags
929 -fno-strict-aliasing -fno-exceptions -fno-rtti
931 ===================== Warning =============================
932 Turn on new bsnprintf() code. This could cause print output
934 ===========================================================
936 kes Fix crypto when not using openssl. I previously overlooked this.
937 kes Eliminate crypto type punning problems by eliminating void * and
938 using uint8_t * instead.
939 kes Harden authentication failure in FD by single threading errors
940 and forcing a 6 second wait.
942 ===================== Warning =============================
943 Removed 'Accept Any Volume' directive.
944 ===========================================================
946 kes Major cleanup and simplification of regress using shell functions
947 (more tests to be converted to new format)
948 kes Add detection of 64 bit Irix as indicated by user.
949 kes Increment catalog database id from 9 to 10.
950 kes Add a few of the new database fields to the various C++
952 kes Implement code to fill in the most important new fields (e.g.
954 kes Ensure that most of the new fields are in create/get/insert/update.
955 More work to be done.
957 kes Update some very old licenses in src/cats.
958 kes Modify the database format for handling Migration jobs:
959 Add PriorJobId, RealEndTime to Job table
961 Remove Stripe from JobMedia record (not used, wasting space)
962 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
963 Add Cost to Location table.
964 kes Delete mac_record subroutines.
965 kes Add new table values to create/update/get routines as appropriate.
966 kes Update the update_tables and make_tables scripts.
967 kes Make a first cut in using a union where multiple pointers (actually
968 pointers to pointers) are stored.
969 kes Make some changes to base64.c suggested by Robert and others and add
970 a small amount of documentation.
971 kes Add some changes suggested by Peter for Solaris (bregex...)
972 kes Make runscript.h always built because it needs to be pulled into
973 more places. In particular its RES was left out of a union.
974 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
975 This makes it slightly easier to detect uninitialized variables.
977 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
978 sometimes creates install problems.
979 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
980 Nelson's code. More to do.
981 kes Convert a few store_bit to store_bool in filed_conf.c.
982 kes DVD tweak to block.c as supplied by Uwe Muessel.
984 kes Modify configure.in to check for typeof().
985 kes In findlib/attribs.c use typeof instead of templates if possible.
987 kes Implement partial error messages for src/filed/acl.c
988 kes Fix return code to fail when doing update barcodes and
989 Pool resource is not found. This previously caused Volumes
990 to be labeled as cleaning tapes.
991 kes Small updates to projects.
993 kes Add Eric Bollengier patch for new RunScript directive. It breaks
994 compatibility between dird and fd.
996 kes Prevent DVD code from rewriting label if the device cannot be
998 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
999 fix Debian build bug.
1000 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1001 kes Integrate manpages contributed by Jose Luis.
1002 kes Update projects file.
1003 kes Add manpages Makefile.in to configure.in
1004 kes Remove installation of bacula.8 in scripts directory.
1006 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1008 O_NOATIME is a open() flag which makes it possible to read a file without
1009 updating the inode atime (and also without the inode ctime update which
1010 happens if you try to set the atime back to its previous value). It also
1011 prevents a race condition when two programs are reading the same file, but
1012 only one does not want to change the atime. It's most useful for backup
1013 programs and file integrity checkers (and bacula can fit on both
1016 Recent versions of the Linux kernel and glibc have support for it (the
1017 glibc support being mostly copying the O_NOATIME definition to
1018 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1019 it does nothing (since the kernel ignores unknown flags).
1021 If the kernel has support for it, trying to use it either works, fails
1022 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1023 are not either the owner of the file or root). A simple way to prevent the
1024 failure is to open the file without the flag and set it later with
1025 fcntl(F_SETFL), ignoring any EPERM errors.
1026 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1027 of restarted jobs to complete (due to a destroyed pthreads conditional
1028 variable used by the message thread).
1029 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1031 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1032 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1033 colons in query.sql file.
1034 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1035 not to create orphans.
1036 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1037 in restore long listing.
1038 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1039 of incorrect MarkedId.
1040 kes Apply patch from adioso bug #616 to correct text in manual (replace
1041 Director with File daemon).
1042 kes Rework a few of the zlib changes so that they build properly.
1045 kes Move DIR 'run' command to SD before starting the message thread
1046 as suggested by Cristopher Hull to avoid a race deadlock from
1047 two threads using the bsock structure.
1048 kes Modify LICENSE to correct some problems pointed out by Debian.
1050 kes Correct EOF with no \n lex.c problem.
1051 kes Tweak compat.h compat.cpp and merge with apcupsd
1052 kes Add additional INFO messages if autochanger cannot be used.
1055 kes Simplify Win32 Makefile
1056 kes Correct count of buffers/bytes used by smartall.c
1057 kes Updated compat.h after porting apcupsd to MinGW.
1059 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1060 started adding Makefile ...
1061 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1063 kes Reloading a bad configuration file doesn't kill director any more.
1064 Thanks to fix from Eric Bollengier.
1066 kes Fix problem of accents with new Win32 code.
1067 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1068 works in the MinGW build with the exception that there
1069 is a problem with accented characters -kes i.e. there is
1070 some mapping problem with wide characters.
1071 kes The code no longer compiles with Microsoft VC++.
1073 kes Start implementing Christopher's St.Bernard code.
1074 kes Add Christopher's mods for opening files.
1075 kes Strip \r \n from Win32 error messages (Christopher)
1076 kes Add more info about Win32 system if unknown (Christopher)
1077 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1078 kes Fix a number of incorrect strings marked for translation, when
1079 they should not be (e.g. commands).
1080 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1081 Patches supplied by user in bugs #608 and #599.
1082 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1083 listing. This fixes some problems with Win32 printing incorrect
1085 kes Correct the clock shift comm time calculation between the DIR
1086 and the FD. It was added rather than subtracted.
1087 kes Strip all backslashes in filenames to be restored on Win32
1088 machines -kes the names should all be in Unix format, and if
1089 there are any backslashes it is most likely due to an improper
1090 FileSet definition, and the files will not otherwise be
1092 kes Remove lib/regex.c (replaced by bregex.c).
1093 kes Delete src/win32/License.txt
1094 kes Modify installer to install LICENSE
1096 kes Fix bug in build-win32-cross-tools script reported by Howard
1097 kes Implement cross compiled bconsole
1099 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1100 kes Write first cut of README.mingw32
1101 kes Add back ua_label barcode fix from Rufolf Cejka.
1102 kes Integrate the majority of the Mingw cross-tools submission
1103 made by Howard Thomson. Everything compiles, with zlib, openssl,
1104 and VSS turned off. Linking needs a pthreads library ...
1106 kes Add 'Dir Status' button to the gnome console.
1107 kes More work on migration.
1108 kes Restore non-compatible base64 coding to permit compatibility.
1109 kes Display heap stats in Storage daemon without debug level.
1111 kes Integrate most of the MinGW changes -kes more to do.
1113 kes Implement using pg_config for finding PostgreSQL files.
1114 Fixes bug #600. Patch supplied by user.
1115 kes Remove -t option from mktemp in mtx_changer.in and use
1116 working directory. Fixes bug #578.
1117 kes Update job start time after the any run before job so that
1118 files created by the script are only backed up once. Fixes
1120 kes Strip trailing newline only from filenames entered in
1121 the restore command when reading a file. This permits
1122 the user to enter filenames with trailing spaces. Fixes
1123 bug #549. The user supplied a patch that I modified slightly.
1124 kes Use the most recent time (st_mtime, st_ctime) in the dir
1125 command in restore. This gives the user a better idea of what
1126 the newest file really is. This fixes bug #574. The fix
1127 was suggested by the user.
1128 kes Implement a compatible version of base64. This permits external
1129 programs to duplicate Bacula's base64 algorithm using standard
1130 routines. This fixes bugs #296, and 565. Patch submitted by
1132 ================= Note ========================
1133 Previous Signatures stored in the database are no longer
1134 compatible with this. The main downside is for Verify jobs,
1135 and doing an InitCatalog run will fix the problem. Also, the
1136 authentication between the deamons is changed, so all daemons
1137 must be simultaneously upgraded.
1138 ==============================================
1139 If you don't like this fix, set:
1140 const bool compatible = true;
1142 const bool compatible = false;
1145 kes Ensure that DB signature is never NULL.
1146 kes Ensure that DB table names are not translated.
1147 kes Fix scheduler to handle time skew (eg daylight savings).
1148 kes Fix scheduler to use lock_jobs() to avoid most problems
1149 with reload. Window is now milliseconds.
1151 kes Apply patch from Christopher Hull
1152 kes Allow multiple connections to database with different
1154 kes Invalidate the scheduler when doing a reload. Fixes seg
1155 fault, but still 60 second window.
1156 kes Additional info in Reschedule message.
1157 kes Use set_jcr_job_status() everywhere to prevent loss of
1159 kes Display peer IP in FD if error from connecting DIR.
1160 kes Don't increment file count for DIRBEGIN.
1161 kes Replace illegal characters in Win32 filename by _.
1162 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1163 kes Hash hard link filenames rather than linked list.
1164 kes Fix for security failure in chdir on Win32.
1165 kes Add CreateDirectoryA/W win32 API entry points.
1166 kes Add /silent option to Win32 FD for Install/Remove service.
1167 kes Always print Heap statistics in FD.
1169 kes Remove the -f option from the chown in Makefile.in for more
1171 kes Change setting the group in Makefile.in to use chgrp for
1173 kes Implement a write_store and read_store to replace
1174 dirstore in reserve.c
1175 kes Implement a Bacula read/write lock for Python rather
1176 than using the Python lock to avoid recursive problems.
1177 kes Correct the uninstall directory names in filed/Makefile.in
1178 as reported by a user.
1180 kes Correct some problems with database creation (new tables).
1181 kes Replace a bunch of old 0x%x by %p.
1182 kes Get first cut of Migration with Job selection working.
1184 kes Change store_bit() to store_bool() for the Spooling in
1185 dird_conf.c -kes bug reported by Robert Nelson.
1187 kes Correct Makefile bug found by Dan Langille.
1189 kes Correct Makefile for Solaris /bin/sh
1190 kes Correct mtx-changer.in for Solaris /bin/sh
1191 kes Abort if a conf resource does not have a Name =
1193 kes Change the name of the regex program to bregex.
1194 kes Add the bwild program to the tools directory. It is similar
1195 to the bregex program.
1196 kes Implement create bregex.h and bregex.c in src/lib from the
1197 Python regexp program.
1198 kes Use the new bregex.c to implement Regex expressions on Win32.
1200 kes More work on migration.
1201 kes Implement wild program in tools directory for testing
1202 wild-cards. Almost identical to the regex program.
1203 kes Up port VSS single thread locking code.
1204 kes Replace N_(..) by NT_(...) to inhibit translation of
1206 kes Modify Makefile to change the permissions on Working Directory
1207 to 770 if the directory is created.
1208 kes Do not fail the Makefile if changing the permissions or
1209 owner/group on WorkingDir fails.
1210 kes Remove early selection of Scratch Volumes in the recycling
1212 kes Correct the old recycling algorithm so that Scratch Volumes
1213 are selected when looking for a Volume in the changer.
1214 kes Correct a typo in the Verify SQL reported by Joe Park.
1216 kes Remove automatic case folding on Windows FDs. You must
1217 explictly use the 'Ignore Case = yes' option.
1218 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1219 scratch volume in an Autochanger early in the 'recycling'
1222 kes Make weof() and clrerror() methods of class DEVICE.
1224 kes Tweak license to include Microsoft restrictions.
1225 kes Move mysql.reconnect to after real_connect(). Thanks to
1226 Frank Sweetser for the patch.
1227 kes Disallow a backslash in a File = directive (Windows junk)
1228 unless the string is quoted.
1229 kes Apply Eric's patch to ua_label.c so that daemon protocol
1231 kes Add NT_ definition for strings that should not be translated.
1232 kes Apply NT_() to ua_label.c
1233 kes Remove timed wait for VSS on Win2K3 as it is not yet
1235 kes Correct bacula.in script to reference bacula-ctl-xx in the
1236 sysconfig directory rather than the bin directory.
1238 kes Fix a long standing bug in the bacula start/stop scripts.
1239 kes Attempt to add the new bacula-ctl-* files to the rpm.
1240 kes Switch to using typeof() for list traversing to avoid
1241 as many FC5 g++ compiler warnings as possible.
1243 kes Split the bacula start/start script into four files:
1244 bacula -kes starts and stops calling other scripts
1245 bacula-ctl-dir -kes starts/stops the director
1246 bacula-ctl-fd -kes starts/stops the File daemon
1247 bacula-ctl-sd -kes starts/stops the Storage daemon
1249 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1250 kes Correct editing of JobId from int to int64 in fd_cmds.c
1251 kes Eliminate FileSet name race with bash_spaces() and multiple
1252 threads by bashing in a local.
1253 kes Fix error return from 'use storage' to print a correct error
1254 message rather than nothing.
1255 kes Correct false re-read last block error message when two jobs
1256 are simultaneously writing at the end of a tape.
1257 kes Simplify exit conditions in the reserve.c code to avoid
1258 possible non-release of reservation_lock().
1259 kes Suffle lock order in reserve to avoid deadlock between
1260 reservation lock and device mutex.
1262 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1263 tracking this down for me !!!! as it broke the Win32 build.
1265 kes Integrate addition of line count limitation to bsmtp -l from
1266 Sebastian Stark <stark at tuebingen.mpg.de>
1268 kes Implement regex test program in tools directory.
1269 kes Attempt to fix time problem with bsmtp with foreign langs.
1270 kes Add strip_trailing_newline() submitted by user.
1271 kes Implement regex matching in migrate.c
1273 kes Fix bug #537 to allow arbitrary time to mount a volume for
1274 restore, if polling is turned on.
1275 kes If dir_user or dir-group is specified in ./configure apply it to
1276 the working-dir. Fixes bug #533.
1277 kes If rescheduling a job cancel the previous incarnation with the SD.
1278 Fixes bugs #566 and 557.
1279 kes Fix bug #567 do_message() definition type conflict.
1282 kes Add more jcr methods and make mutex and use_count private.
1283 kes Create lock/unlock methods for jcr.
1284 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1285 records to get to seek position.
1286 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1287 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1288 terminates correctly by doing pthread_kill(). Do not destroy
1289 SD cond wait variable between executions of the job. Use local
1290 mutex for cond variable to avoid blocking jcr chain. Fix poor
1291 use of jcr use count in jobq.c for restarted jobs.
1292 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1293 lib/jcr.c -kes prevents locking the jcr chaing.
1294 kes Apply patch from bug #564, which corrects listing volumes with
1295 multiple autochangers. Apply same fix to next volume list.
1296 kes Fix bug #562 where restore bootstrap file is not unique.
1297 kes More details in implementing David's migration syntax proposal.
1298 kes Save and restore dcr when swapping drives so that if we have
1299 a write dcr it is not lost.
1300 kes Use new routine lock_reservations() to lock the reservations
1301 system, and call it while looking for a volume in askdir.c.
1302 This could possibly fix bug #543.
1303 kes Stop SD command loop if job is canceled.
1306 kes Remove old code from findlib/create_file.c
1307 kes Rename mac.c migrate.c
1308 kes Add user friendly display of VolBytes in job report.
1309 kes Rename target... to previous... to make it a bit easier to
1311 kes Add selection type and selection pattern to Migration (idea
1312 given by David Boyes).
1315 kes The po files should now be current.
1316 kes Fix new sql_use_result() code to properly release the
1317 buffers in all cases.
1318 kes Use the keyword ujobid to mean the unique job id; job or jobname
1319 to mean the Job name given on the Name directive, and jobid to
1320 be the numeric (non-unique) job id.
1321 kes Allow listing by any of the above.
1322 kes Add the user friendly job report code for reporting job elapsed time
1323 and rates with suffexes from John Kodis <kodis at comcast.net>.
1324 kes Add Priority and JobLevel as Python settable items.
1325 kes Use TEMPORARY table creation where the table is created by
1327 kes Add new code submitted by Eric for waiting on specific jobid.
1328 kes Add ACL checking for the dot commands.
1329 kes Fix restore of writable FIFOs.
1330 kes Fix a bug in bpipe where the string was freed too early.
1332 kes Modify the Python class examples to inherit object -kes new way
1333 of defining classes. Patch from Felix Schwarz.
1334 kes Implement jobuid to replace old usage of job in keywords as
1335 suggested by Eric Bollengier.
1336 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1337 wait (wait for all jobs to stop)
1339 wait jobuid=unique id
1341 kes Implement write variables for Python to set Priority (anytime), and
1342 Job Level, only during JobInit event.
1344 kes Fix the block listing bug pointed out by Arno.
1345 kes Update the po files at Eric's request.
1347 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1348 accept time qualifiers.
1349 kes Make catalog respect ACL.
1350 kes Add recycle count to Media record.
1352 Changes to 1.39.6-beta1 24Feb04
1354 kes Add Rudolf Cejka's new rc-chio-changer.
1355 kes Implement pulling Volume from Scratch Pool if the
1356 Volume is in the autochanger.
1357 kes Implement additional command arguments for update Volume.
1361 kes Back port changes to 1.38.5
1362 kes Fix recycle SQL for StorageId.
1363 kes Fix misplaced quote in mtx-changer script.
1365 kes Note. Your database must be updated, or you must create
1366 a new database. I have not yet incremented the database level.
1367 kes Add Location table.
1368 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1370 kes Implement create/get mac record in database for adding extended
1371 Migration data to the job record.
1372 kes Add new MAC table to update/make database scripts.
1373 kes Return Storage name used when getting VolumeNames for a job.
1374 kes Change bsr file keyword Storage to Device, which is more accurate.
1375 kes Ensure that Mac records are pruned/purged.
1376 kes Tweak SD tools to deal with changing media type.
1377 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1378 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1379 that the subroutine can switch devices, and hence dcrs.
1380 kes Modify the multiple MediaType read code to re-use the same
1381 dcr when switching devices. This makes the code much more
1383 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1384 from a table for restore.
1385 kes Add Storage name to VolParams, but it really should be Device.
1387 kes Add disk-changer to scripts directory + configure/Makefile
1388 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1389 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1390 kes Implement new store_bool that stores in a bool.
1391 kes Add true/false to yes/no conf directives.
1392 kes Make first cut at changing appropriate store_yesno to store_bool.
1393 kes Complete implementation of Pool storage devices.
1394 kes Move starting clones to job.c
1395 kes Move create_restore_bootstrap_file() to job.c
1396 kes Make copy_storage() more general to be able to handle
1398 kes Cleanup a lot of migration code for manual running, including
1400 kes Move getting a scratch Volume into a subroutine.
1401 kes Make all places a Volume that is added to a pool to
1403 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1404 kes Fix segfault in restore command when no value specified.
1405 kes Start adding code to handle multiple MediaTypes in restore.
1406 kes Eliminate race condition in getting Volume name for
1407 two drive autochanger.
1408 kes More debug code in autochanger.
1409 kes Add storage keyword to bootstrap file, add parsing.
1410 kes Move slot in bsr file into Volume record as there will be
1411 a different slot for each Volume.
1412 kes Create reserve.h
1414 kes Implement Pool storage overrides.
1416 kes Implement first cut of Migration.
1417 kes Implement mysql_use_result() from patch by Karl Hakimian.
1418 This reduces significantly the memory consumption during
1419 the restore tree building, and hence runs faster too.
1420 kes Implement StorageId patch supplied by user (reggie) in bug
1421 #536. This should permit Bacula to work correctly with two
1423 kes Implement Job listing variations suggested by a user.
1424 kes Move updating bootstrap code in backup.c to subroutine
1425 update_bootstrap_file().
1426 kes Add new job status elapsed time and bytes written user
1427 friendly job report output patch sent by John Kodis
1428 <kodis at comcast.ne>.
1429 kes Implement a storage list in Pools.
1430 kes Separate out setup_job() code from run_job().
1431 kes Get migration working -kes lots of changes in mac.c in both
1433 kes Apply patch from user (Eric Bollengier I think) that fixes a
1434 DIR crash when no arguments are supplied to a dot command.
1435 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1436 kes Fix command arg name->volume in label command of gnome-console.
1437 kes Fix SD acquire.c to release correct DCR by explicitly testing
1438 on the dcr address rather than trying to devine if it is a read
1439 or write dcr. This failed in error conditions when the device was
1443 kes Apply user supplied patch for more readable rate output
1445 kes Continue implementing migration.
1446 kes Implement support for removable filesystems in SD.
1447 kes Ensure that btraceback scripts can be read by anyone.
1448 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1449 kes Correct bug where canceling restore before the FD contacts
1450 the SD causes the drive to be left in read mode.
1451 kes Move ofline_or_rewind into DEVICE::close().
1452 kes Eliminate close_device.
1453 kes Convert several dev subroutines to methods (e.g. bsf,
1455 kes Eliminate force_close_device().
1456 kes Implement Device Type directive in Device resource that
1457 can have values File, Tape, Fifo, DVD, or Prog.
1458 kes Add has_cap() method to Device.
1461 kes Add patch from bug #527 to allow RedHat user to specify
1462 options/user/group for starting each daemon in
1463 /etc/sysconf/bacula.
1465 kes Add two new queries to query.sql provided by Arno. One
1466 list volumes known to the Storage device, and the other
1467 lists volumes possibly needing replacement (error, ...).
1469 kes Add periodic (every 24 hours) garbage collection of memory
1470 pool by releasing free buffers.
1472 kes Correct bug counting sized (for display only) in smartall.c
1473 kes Print FD mempool stats if debug > 0 rather than 5.
1475 kes Make db_lock() mutex error fail the job rather than abort
1476 Bacula. Canceling the job caused the mutex to fail.
1477 kes Correct bug in alist.c that re-allocated the list if the
1478 number of items goes to zero.
1479 kes Move the reservation system thread locking to the top level
1480 so that one job at a time tries all possible drives before
1482 kes Implement a reservation 'fail' message queue that is built
1483 and destroyed on each pass through the reservation system.
1484 These messages are displayed in a 'Jobs waiting to reserve
1485 a drive' list during a 'status storage='. Note, multiple
1486 messages will generally print for each JobId because they
1487 represent the different problems with either the same drive
1488 or different drives. If this output proves too confusing
1489 of voluminous, I will display it only when debug level 1
1490 or greater is enabled in the SD.
1492 kes Add enable/disable job=<job-name>. This command prevents
1493 the specified job from being scheduled. Even when disabled,
1494 the job can be manually started from the console.
1495 kes During 'update slots' clear all InChanger flags where the
1496 StorageId is zero (old Media records).
1498 Beta release 1.38.4:
1500 kes Fix autochanger code to strip leading spaces from returned
1501 slots number. Remove bc from chio-changer.
1502 kes Back port a bit of 1.39 crypto code to reduce diffs.
1503 kes Fix first call to autochanger that missed close()ing the
1504 drive. Put close() just before each run_program(). Fixes
1507 kes Add PoolId to Job record when updating it at job start time.
1509 kes Pull in more code from 1.39 so that there are fewer file
1510 differences (the new ua_dotcmds.c, base64.h, crypto.h
1511 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1512 util.c. Aside from ua_dotcmds.c these are mostly crypto
1514 kes Implement new method of walking the jcr chain. The
1515 incr/dec of the use_count is done within the walking
1516 routines. This should prevent a jcr from being freed
1517 from under the walk routines.
1522 kes Start implementing Verify list output.
1523 kes Move the suitable_drive flag to a better place to prevent
1524 premature termination of the reservation if all drives
1525 are busy -kes should fix Arno's diff/inc pool failures.
1527 kes Add mutex to single thread VSS code in Win32.
1529 kes Simplify code in askdir.c that waits for creating an appendable
1530 volume so that it can handle multiple returns from the wait
1532 kes Modify the wait code to permit multiple returns.
1533 kes Return a zero when 'autochanger drives' is called and
1534 it is not an autochanger.
1535 kes Make rewind_dev() a method taking a DCR as an argument.
1536 This permits closing and reopening the drive if the
1537 rewind fails as happens if the drive was loaded while the
1538 file descriptor was open. This refreshes the file descriptor.
1539 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1540 if the device is open or not. This should eliminate
1542 kes Return error if reserve cannot find at least one suitable device.
1543 kes Make wait_for_sysop() return correct state information.
1544 kes Fix Win32 state file problem. write was not using compat
1545 code. This should fix bug #500.
1547 kes Modify gui on command to set only GUI mode and not batch.
1548 kes Modify .messages command to always print messages regardless
1550 kes If GUI mode is on, suppress automatic printing of
1552 kes Delete old bnet packet code.
1553 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1554 wx-console. -kes not implemented because bconsole must be updated.
1555 kes Modify restore command in wx-console to set gui on and to use
1556 only .messages instead of messages. Hopefully this fixes bug
1558 kes Fix seg fault in exit of acquire when canceling a job --
1559 reported by Wolfgang Denk
1560 kes Pull in latest reservation system changes from 1.38
1561 kes Make .messages command always print messages regardless
1562 of the automessages flag.
1564 kes Fix seg fault if user labels a drive directory bug #513
1565 kes Remove quotes around Version as it breaks things.
1567 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1568 kes Apply sparse code fix for raw drives and fifos. Bug 506
1569 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1571 kes Correct reservation system to do a last ditch try
1572 for any mounted volume, then anyone anywhere.
1573 kes Add quotes around table Version because of
1574 error in MySQL 4.1.15 -kes bug report submitted.
1575 kes Correct some minor problems with btape in the fill
1577 kes Updates to ssh-tunnel from Joshua Kugler.
1578 kes Added a report.pl program from Jonas Bjorklund.
1579 kes Simplify the O_NONBLOCK open() code for tape drives,
1580 and always open nonblocking.
1581 kes Do not wait for open() if EIO returned (shouldn't happen).
1582 kes Eliminate 3 argument to tape open().
1583 kes Correct the slot # edited in the 3995 Bad autochanger unload
1585 kes With -S on bscan (show progress) do not divide by zero.
1587 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1588 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1589 kes Remove unused code in wait_for_device.
1590 kes Make wait_for_device() always return after 60 seconds of wait.
1594 kes Add stubs for non-crypto build.
1596 kes Use localhost if no network configured
1598 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1599 kes Remove debug print.
1600 kes Add bail_out in error during state file reading.
1602 kes Merge changes made to 1.38.3 into HEAD
1603 kes Add stubs for pygtk-console code
1604 kes Create Makefile.in for pygtk-console code
1606 kes Merge updates into 1.38 branch
1607 kes Update specs to include mysql4 define.
1608 kes Fix when attributes are sent, must be after binit().
1609 kes Stop read_record() if status not ok in second loop.
1610 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1611 and partial records in read_record(). This allows bscan
1612 to get FileIndex at EOT correct.
1613 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1615 kes Fix Win32 built to work with new crypto code.
1616 kes Apply patch supplied by user (slightly modified) to fix
1617 correct detection of holes in block devices and FIFOs.
1619 kes Apply patch supplied by user (slightly modified)
1620 to fix SD hang with multiple pools and bad client
1621 IP. Fixes bug # 508.
1623 kes Add nagios plugin to the examples directory. Submitted by
1625 kes Remove warning message about multiple saves of hardlinked files
1626 from find_one.c as it can generate too many warning messages.
1627 kes Modify most restore error messages to be queued so that they
1628 appear at the end of the job rather than mixted with the restore
1629 listing where they could be 'lost'.
1631 kes Reset timeout values before select() per patch from
1632 Frank Sweetser for problems with non-blocking sockets.
1633 kes Unlink the state file if either reading or writing it gets
1634 errors. Hopefully this will fix Win32 exit problems.
1635 kes Add sanity check in append.c to ensure that dcr is not NULL.
1636 This can happen if multiple drive autochanger SCSI control
1637 channel and drive indicies do not correspond.
1639 kes Get next volume from Scratch pool before creating a volume.
1640 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1641 kes Remove argument from create_bacula_database for SQLite as it
1643 kes Add back index code so that two drive autochangers can get
1645 kes Change a bunch of debug levels to aid debugging autochangers.
1646 kes Fix reservation so that mutexes are properly applied.
1647 kes Rework reservation algorithm so that two drives can be used
1650 kes Landon merged his data encription changes into the HEAD
1651 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1652 If this patch is applied, the number of days can be specified with
1653 'list nextvol days=xx'
1655 'status dir days=xx'
1656 My use case is to be able to preview the next scheduled job (and the
1657 next tape to be used) on fridays if there are no scheduled jobs during
1661 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1662 kes Fix malformatted bnet error message that caused seg fault
1664 kes Applied user patch to improve README.vc8 in src/win32.
1666 kes Add Migrate, Copy, Archive Job types (some where there)
1667 kes Correct some more editing of JobId's (for 64 bit compatibility).
1668 kes Ensure that StorageId is stored in Media record when ever possible.
1669 kes Add Migration Job to Job.
1670 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1671 Next Pool to Pool resource.
1672 kes Add more code to mac.c (migration archive copy).
1673 kes Change Start Storage daemon job to require read and write storage
1675 kes Pass read storage data to SD as well as write storage data.
1676 kes Remove old code from winservice.cpp
1677 kes Break on error in scan.
1678 kes Fix typo in signal.c
1679 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1680 kes Cleanup how find_device() works.
1681 kes Add read output to Status in SD.
1684 kes Add red-black btree routines
1686 kes Remove abs() in bfile.c so that it compiles on Solaris.
1689 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1690 kes Fix bnet-server bug found on OpenBSD. Bug #486
1691 kes Fix cancel failure bug. Bug #481
1692 kes Fix failure when Pool name has spaces. Bug #487
1693 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1694 kes Fix a couple of free()s in src/filed/acl.c
1695 kes Fix memory overrun in bfile.c in building OS X resource
1696 fork filename. Bug #489
1697 kes Add Pool name to SD status output.
1699 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1700 kes Make sure to set storage before trying to set drive.
1701 kes Add bacula_mail_summary.sh to examples directory. It makes
1702 a single email summary of any number of jobs. Submitted
1704 kes Make sure when we do a mount to unblock the device even
1705 if the drive could not be opened.
1707 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1708 and correct a few minor problems to make it build on Linux.
1710 kes Remove delete of CVS from all Makefiles
1711 kes Fix seg fault when clicking on Add button in wx-console
1712 restore panel. Bug #470.
1713 kes Fix copyright date and URL typo -kes bug #468.
1714 kes Change autostart install for FreeBSD to look for rc.conf
1715 rather than rc.local as suggested fix for bug #466.
1716 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1717 grant on status. Bug #465
1718 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1719 update script. Bug #464
1720 kes Tweak #ifdefing a bit in new Win32 stream code.
1721 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1722 kes Add documentation of performance #defines
projects / bacula / bacula / blob