1 Technical notes on version 1.39
5 kes Add code in catreq.c to reject volumes not marked Enabled.
6 kes Add a few more ACL access checks.
7 kes Add \n in gnome2-console restore command so that output prints
8 nicer -- i.e. lines do not run together.
9 kes Fix autolabeling so that it will not mark a volume in error
10 if the volume was not actually opened. This should fix bugs
12 kes Require tape drive to be open before autolabeling.
13 kes Require explicit mount command on non-tapes before autolabeling.
14 kes Implement an open_client_db() that searches the keywords for
15 either a catolg or client, and opens the appropriate catalog.
16 This makes Bacula adjust better to multiple catalogs.
17 kes Use more name() methods for resources rather than hdr.name.
19 kes Fix code to check for two resources of same name. It forgot
20 to check the last entry. Fixes bug #734.
21 kes Apply scanvolume patch from Richard Mortimer that fixes bug
23 kes Apply Eric's patch for recycling the Scratch pool.
24 kes Note, for the tray-monitor (or almost any restricted console_
25 to work, in version 1.39.x you must add CatalogACL = catalog-name
26 kes Add appropriate new #undefs to autoconf/acconfig.h so that
27 configure works correctly.
28 kes Implement configure code to allow the user to disable IPv6 with
30 kes Apply Richard Mortimer's patch to prevent seg fault if mount point
31 not specified -- SD refuses to start.
32 kes Add magic.bacula from bug #715 to the scripts directory along with
33 Arno's explanation of how to install it.
34 kes Convert a bunch of hdr.name into name() method calls.
35 kes Fix the code to remove .bsr files. Fixes bug #736 -- Martin.
37 Version 1.39.32 released:
39 kes Take first catalog if gui is set, or if using dotcmd.
40 kes Fix a couple of compiler warnings in wx-console
41 kes Apply the immutable patch for FreeBSD hardlinked files supplied
43 kes Add Volume name to Forward spacing message.
44 kes Update migration job start time (so it is not zero) to prevent
45 immediate recycling of the job. This *should* fix bug #733.
47 ebl Fix runscript configuration parsing bug.
49 kes Add ENABLE_NLS (as suggested by Eric) to correct NLS problems.
50 Remove NLS kludge from baconfig.h. This fixes bug #729.
51 kes Allow seeking on DVD.
52 kes Add additional messages when Job canceled automatically for
53 max run time or max start wait exceeded. This fixes bug #621.
54 kes Update maxruntime-test in regression script to properly test
55 max run time -- from info given in bug #621.
56 kes Simplify automatic cancel code.
57 kes Add check for job_canceled() in FD when contacting SD so that if
58 job is canceled from max runtime, it terminates faster.
60 kes Save and restore volume name in stored/mount.c fixed bug #712
61 where wrong tape was requested in a mount.
62 kes Implement cleaner orphan buffer dumping with buf address.
63 kes Fix orphaned buffer when canceling job waiting on op intervention.
64 kes Update projects file for next vote.
65 kes Implement a fix (more could be done) for bug #728 where a double
66 EOF is writing on the Volume when spooling is enabled and the
67 connection with the FD fails (FD crash, comm error).
68 kes Disable attempting to autolabel when polling and device is not
69 a tape. This fixes bug #730 where polling with a removable disk
70 not mounted caused lots of new Volumes to be created then marked
73 kes Enable VSS by default.
75 Version 1.39.30 released:
77 kes Complete hopefully the last of the copyright transfer changes.
78 kes Separate NumVolumes in SD to NumReadVolumes and NumWrite volumes so
79 that migration writing to multiple volumes doesn't mess up reading
80 Volumes. This should fix bug #720 -- multivol migration fails.
81 kes Make migration SQL look only for Type='B' jobs to migrate. This should
82 fix bug #724 jobs getting migrated twice.
83 kes Convert remaining dev_cap(dev, ...) to use dev->has_cap().
84 kes Implement dev->clear_cap() and dev->set_cap() methods.
85 kes Turn off disk seeking on restore for DVDs since I am not 100%
88 kes Implement code that should properly set that a job was migrated,
89 if the migration was successful even if there were no file to
91 kes Apply Richard's patch to fix building or filed/restore.c without
93 kes Ensure that at least one block is written by the SD even if the
94 FD dies or fails -- should fix bug #728.
95 kes Convert stored/record.c ASSERT into a soft fail if the length of
96 a record is too insanely long. This should fix bug #???
98 kes Fix automatic labeling of File volumes, which was broken by new
99 removable device code.
101 kes Remove typedef uLong for HP in baconfig.h. It broke things.
102 lf Fix job byte reporting -- the digest code runs in verify.c and
103 increases this value. The better solution is to digest the
104 stream as we receive it, thus removing the need to re-read
105 from disk at all, but that requires more extensive and
106 potentially destabilizing changes.
107 lf This commit fixes backup and restore of HFS+ resource forks.
108 lf Add a long-missing 'break' statement in HFS+ attribute
109 handling that resulted in restore failures.
111 ebl Fix runscript to always execute command after all job type.
113 Version 1.39.30 released:
115 kes Mark build-depkgs-mingw3 executable in configure process.
116 kes Update autoconf/config.h.in to include LOCALEDIR
117 kes Undefine NLS settings for wxWidgets as there is a conflict with
118 their way of doing things.
119 kes Implement a rpool and rpool_source in jcr.h for Migration jobs.
120 kes Change a bunch of ->hdr.name to ->name()
121 kes Straighten out handling of read and write pools for Migration, including
122 getting the code in the proper order.
123 kes Improve migration error messages and debug output.
124 kes Shorten code path in migration if nothing found to do.
125 kes Implement read/write pool in migration job report.
126 kes Move ua_run.c select_job_level code into a subroutine (readability).
127 kes Move ua_run.c display_job_parameters into a subroutine.
128 kes Do not bash dcr->VolumeName in get_volume_info() because it makes
129 restore dependent on a valid catalog containing the Volume name.
131 kes Put make_catalog_backup SQL_BINDIR in an environment variable to
132 make it easier for the user to change.
133 kes Fail any backup job that tries to use encryption and sparse options.
134 Hopefully this is a temporary change.
135 kes Correct the EndJob return string for non-backup jobs.
136 kes Review the encryption restore code.
137 kes Implement a new encryption regression test with compression.
138 kes Modify migrate not to fail if nothing found to migrate.
139 kes Add #undef HAVE_OPENSSL, HAVE_TLS, HAVE_CYRPTO to autoconf/config.h.in
140 because they were not always set correctly.
142 kes Update configure.in to include python 2.5 search.
143 kes Back out unwanted migration change reported by Richard Mortimer.
145 kes Make migration with no files to migrate set normal termination.
146 kes Change message when job manually started to say Job queued. ...
147 kes Add job report indication of whether or not VSS and Encryption were
149 kes Modify sparseBlock variable name to make the code clearer.
150 kes Add more sparse tests to regress using gigaslam sparse file
152 kes Enable data encryption code.
153 kes Add gigaslam.c to src/tools. It creates a 1GB file that contains
154 only two blocks -- i.e. it is a real sparse file.
156 kes Enable disk seeking on restore.
157 kes Implement the SD 'Block Positioning = yes|no' directive. This
158 allows the user to turn off block level seeking, but restores
160 kes Change the word illegal to read invalid in a few places.
161 kes Fix Win32 build, which broke when I added parse_args_only in
162 lib. I'm not sure I got the entry point right for msvc.
163 kes Turn off data encryption. It can be enabled by defining
164 DATA_ENCRYPTION in src/version.h and recompiling.
165 kes Implement flag to turn off data encryption feature.
166 kes Move unserial code in restore.c to a subroutine. Add a bit of debug
168 kes Rework a bit of code in backup.c to handle sparse blocks correctly.
169 The main problem was that signatures were being generated on blocks
170 of zeros, which is unnecessary.
172 kes Fix scanner (next_arg) to handle leading double quote correctly.
173 kes Modify cd command in restore tree to look at full argument without
174 keywords. This fixes bug #716.
176 kes Do not update Migrated Job type if migration does not terminate
177 normally. This fixes bug #719.
178 kes Update ReleaseNotes
179 kes Purge Job records from the catalog for Migration. This was
180 not properly done previously. This fixes bug #718.
182 kes Initialize msg_type to M_INFO in migration. Pointed out by
184 kes Add some fflush() statements for debug output. This should not
185 really be necessary and defeats buffering but users continue
188 kes More copyright changes.
189 kes Make sure we don't detach from the despool read device since it
190 is a temporary structure where the condition variables are not
191 initialized. Bug #711.
193 kes Add Bacula version+date to Client record. This is a very minor
194 security problem in that passing the version facilitates a hacker's
195 life, but it will make support easier.
196 kes Implement fixes to make disk seeking work. Currently turned
197 off in version.h pending reserch on what problems it will cause
198 because of the previous bsnprinf() sign extension bug.
200 kes Add Landon's refactor of restore Feature request to the
202 kes Tweak debug levels and messages for examining the disk
205 kes Cleanup some of the error termination code in migration.
206 kes Separate read/write source strings to keep track of where
207 storage devices are used in a job.
208 kes Implement a new method of keeping track of which storage
209 device is used in a Job. USTORE keeps both a pointer to the
210 resource and to the source string.
211 kes Modify all code to use new storage set subroutines in job.c
212 kes Modify migrate.c so that the definitive selection of the storage
213 resource is done in the do_migration_init() routine prior to
214 the job going into the job queue. This permits accurate
215 deadlock detection (same read and write storage resource).
216 kes Remove bfill from btape (I think it was a left over stub).
218 kes Make sure that the storage for a job is pulled first from
219 the Pool and if not from the Job.
220 kes Ensure that either the Pool or the Job specifies a Storage
223 kes Start applying new FSFE copyright.
225 kes Add additional error messages in acquiring a drive for read.
226 kes Make WritePartAfterJob the default so that the last DVD part
227 always gets written to the DVD by default.
228 kes Add additional error messages in migration.
229 kes Suppress redundant error messages in migration (possibly more to do).
230 kes Apply Martin's fix (updated to 1.39) that takes into account
231 run storage overrides in the Director status display.
232 kes Implement, but turn off the submitted code that sets the EOT
233 model on FreeBSD machines. Turning on this code is too risky at
234 this point in the development.
236 kes Implement unique dbid routine for migration to prevent the same
237 JobId from being migrated twice. This should fix bug #709.
239 kes Apply Jaime Ventura's 'mail on success' patch.
240 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
241 if memory usage gets too big.
242 kes Tweak migration to ensure that read/write devices are different.
244 kes Create an AUTHORS file to list Bacula contributors.
245 kes Add Richard Stallman's four GPL freedoms to LICENSE
246 kes Require the conf file to have a valid NextPool for writing the
249 ebl Enable RecycleCount in catalog.
250 ebl Fix "echo python | bconsole" segfault
252 kes Implement code to pass the MediaId to the SD. The SD then uses
253 this MediaId when creating JobMedia records. This fixes a bug
254 with Migration where the MediaId got set to the second Volume
255 read rather than the write Volume. Possibly (unlikely) fixes
257 kes Remove NextPool from Job resource.
258 kes Edit a few numbers in the restore dialog with commas.
259 kes Note, the DIR<->SD protocol has changed.
261 kes Replace () by {} in configure.in for proper HP configuration.
262 kes Shorten some lines over 80 characters in filed/backup.c
263 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
265 Version 1.39.28 released:
267 kes Change error message 'illegal' to 'invalid' -- bug #707
268 kes Add rather primitive device resource deadlock detection in
269 the job queue handler. It detects the same read and write device
270 for migration and cancels the job.
271 kes Start adding a unique_dbid_hander() routine in migration to avoid
272 duplicate mediaids and duplicate jobids.
273 kes Add patch from bug #708 to permit relative paths such as ../xxx
274 in the restore tree routine.
275 kes Add Eric Bollengier's patch to reduce locking time in the SD after
276 despooling, and thus many jobs finish faster.
277 kes Correct locking order of reservations lock and device mutex in
278 reserve.c -- this should correct Arno's deadlock that occurred
279 when doing mount/unmount at the same time a job is reserving a
282 rbn Fixed problems with encryption when combined with compression
283 or sparse files. Unfortunately this means that all previous
284 encrypted backups can't be restored.
285 rbn Fixed problem in bfgets with Windows and Mac end of lines.
286 rbn Fixed bug in Windows version of close_bpipe() that cause programs
287 like bsmtp() to hang waiting for the pipe to be closed. Fixed
288 binary file type problems in open_bpipe().
289 rbn Fixed a number of bugs in the mysql DB scripts.
291 ebl Fix broken runscript on director. (RunBefore, RunAfter)
292 ebl Use M_ERROR instead of M_FATAL in runscript.c
294 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
295 rbn Ignore UTF-8 marker at the start of .conf files.
296 rbn Add stab2cv to 3rd party dependencies. This is a utility I
297 wrote that is licensed under the GPL and available on SourceForge.
298 It converts the stab debugging info generated by gcc into Codeview
299 format. Currently it just translates function names to global
300 symbols. This is sufficient to get reasonable stack traces from
301 Dr Watson and to look at minidumps.
302 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
303 rbn Enable Windows XP look and feel for the tray icons and wx-console.
304 rbn Add Windows specific FileSet example to bacula-dir.conf.
305 rbn Reorganize Start menu so that documentation and configuration are
308 rbn Change daemons and utilities so that if -c is omitted from the
309 command line AND there is no configuration file in the current
310 directory then the 'standard' configuration file (eg
311 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
312 doesn't contain any path separators AND there is no configuration
313 file by that name in the current directory then the 'standard'
314 configuration file directory will be searched for a file by that
316 rbn Fixed restore on Windows so that backslashes as path separators works.
317 rbn Add missing query.sql file to Windows installer.
318 rbn Fixed Windows versions of catalog backup scripts.
320 kes Fix optional files in Makefile.in of src/filed that caused
321 a syntax error when using no optional files.
323 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
324 messages; there is no reason to attempt to load a private key.
325 from master key files.
327 Version 1.39.26 released:
329 kes Apply the three patches from Richard Mortimer.
330 bacula-reposition.patch, bacula-tape-reopen.patch, and
331 bacula-eod.patch. This corrects tape positioning on older devices,
332 and also a problem with btape.
333 kes Apply fix from bug report #696 where writing to a FIFO does not
334 work due to a dumb typo.
335 kes Unlock the tape door before the file descriptor is released. This
336 should fix lots of somewhat subtle failures when using an autochanger.
338 kes Correct mtx-changer bug that I introduced in a recent commit, and
339 pointed out by Robert Nelson -- thanks.
340 rbn Fix Windows' daemons so that messages print to stdout if not
341 running as a service.
342 rbn Add daemon name to trace file name (eg bacula-dir.trace).
343 rbn Fix environment variable expansion in directory names on Windows.
344 rbn Fix autochanger support in fill command.
345 rbn Update SQL scripts to match Unix versions.
346 rbn Fix daemon usage displays.
347 rbn Cleanup bacula-dir.conf template.
348 rbn Install openssl.cnf so that the openssl.exe installed in the
349 Bacula\bin directory can be used to generate keys and
350 certificates for TLS and encryption.
351 rbn Fix cleanup of spool files on Windows.
352 rbn Remove /silent option from daemons on Windows. The new default
353 is the same as the old /silent. To enable the message boxes that
354 previously were suppressed by /silent you must add /debug instead.
355 NOTE: As a result of this change, the first time you upgrade from
356 a previous version of 1.39.x you will receive the message
357 boxes when the remove of the old services succeeds. This
358 is the same behaviour as when migrating from a version prior
360 However, going forward, these message boxes will not appear on
361 upgrades or new installs.
362 rbn Add new /debug option. This option enables the message boxes that
363 previously were suppressed by the /silent option. In addition the
364 daemons running as services will open a console window if this
366 rbn Fix bug with service not being removed on migrated installs. This
367 should correct those cases where the file daemon install was failing
368 when upgrading from versions prior to 1.39.x.
370 kes Turn on heap reporting in Dir with zero debug level.
371 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
372 send the same message to stdout.
374 kes Begin work on new GUI 'console'.
375 kes Make configure look in non-standard MySQL library directory
377 kes Make mtx-changer automatically configure the autochanger wait
378 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
380 kes Correct drop_sqlite_tables.in script to not delete the database.
381 kes When writing to a log file, close and reopen the file descriptor
382 if there is an error writing the file.
383 kes Modify the autochanger loaded?, load, and unload commands to print
384 the full text of any mtx output if there is an error. Helps to
385 ease diagnosis of autochanger problems.
386 kes Correct a few Win32 errno returns in the VSS code so that hopefully
387 a resonable Win32 error message will be printed.
388 kes Convert a few strcat()... to bstrncat() in the Win32 code.
390 rbn Added Windows version of bsmtp.
391 rbn Fixed path search for Windows so that Bacula\bin is automatically
392 searched for programs and scripts.
393 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
396 Version 1.39.24 released:
398 kes Apply dvd find volume patch from Richard Mortimer.
399 kes Eliminate the dvd specific mount routines using only the
401 kes Make update_free_space a method of DEVICE and rename
404 kes Require a messages command acl to be able to receive messages
406 kes Add console, system, and scan job types in util.c.
408 kes Print the Volume purged message only for real jobs to keep
409 from cluttering up the daemon messages.
410 kes Lock the tape drive door while Bacula is using the device.
411 kes Add back the 'No Jobs running' message to FD and SD status because
412 my regression script depends on it, and I'm too lazy to change the
414 kes Start using structure assignments (not too happy about it ...).
415 kes Fix a bug in the tools Makefile that broke on Solaris.
416 kes Unload any autochanger drive during a 'release' command.
418 kes Enhance error message when restoring without bootstrap file.
419 kes Check restored size only for regular files.
420 kes Store Python job level in job record in Dir.
421 kes Add back code to open tape device nonblocking, but if rewind fails
422 release file descriptor.
423 kes Modify acquire.c to first try autoloading the device. Also, ask operator
424 to mount tape if drive cannot be opened.
425 rbn Made Windows service tray status windows resizable.
426 rbn Fixed horizontal scrolling of text in status window.
427 rbn Preserve horizontal and vertical scroll position while
428 updating. This prevents the display being reset to the
429 top line every 5 seconds.
430 rbn Fix Windows cross-compile compatibilty problems with
431 *nix variants such as OS X without the zic command.
432 rbn Eliminate dependency on man2html.
434 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
436 kes Fix a compiler warning in compat.cpp
437 kes Change strcpy to bstrncpy in compat.cpp
438 kes Remove some broken code in bdb_list.c
439 kes Fix, hopefully the last, ACL problem in the restore command.
440 kes Update the README.mingw32
441 kes Add new version of upgrade-win32-client.txt to examples directory.
442 Submitted by Michel Meyers.
443 kes Print an INFO message in the job report when a Volume is marked Purged.
444 rbn Fixed handling of external program and script execution
445 so that the format of the command line is more flexible.
446 Now executable path names containing spaces are translated
447 to the equivalent short name automatically. The result is
448 passed to cmd.exe with the quotes removed.
450 kes Apply the recycle patch from Richard Mortimer.
451 kes Convert a few if statements in dev.c to switch statements.
452 kes Start using print_errmsg instead of bstrerror().
453 kes Print a job message in SD when a job is marked to be canceled.
455 kes All code added back. Fixed block.c read/write to loop only 3
456 times. This apparently keeps the OS from crashing (at least
458 kes The kernel bug still persists. Backup something then immediately
459 do a bscan on the same tape, and the kernel will crash.
460 kes Simplifed tape open(). It no longer uses nonblocking mode, which
461 means that opening with no tape loaded will probably take at least
462 6 minutes before an error is reported.
463 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
464 when doing set_os_device_parameters.
465 kes Report open error in mount.c
466 kes Remove all .exe files from the installer directory on make clean.
468 kes Start adding back removed code.
469 kes Back out a number of changes because backups to tape crash my
471 kes Remove the inetd code from the File daemon.
473 kes Add -c option to pg_dump so that it initializes tables when
475 kes Fix FirstWritten time on Volume to be obtained from SD so that
476 it is the actual time the volume was first written.
477 kes Minor Makefile changes.
478 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
479 ebl Add yes keyword to prune/purge command
481 kes Correct a test in block.c that prevented restore of a DVD from
482 looking at the last part in the spool directory.
483 kes Make some error messages clearer mostly by using the word DVD
484 in the message. Improve infor message in read_record for DVDs.
485 kes Remove DVD kludges in dircmd.c label/relabel.
486 kes Move the dvd relabel code from dircmd.c into
487 write_new_volume_label_to_dvd() adding a relabel argument.
488 kes Rewrite the truncate_dvd() code to be much simpler and
489 more logical. First blow away any spool part, then create a
490 new empty part and write to the DVD.
491 kes Rewrite the can_write_on_non_blank_dvd() code making it
492 only ensure that no valid data is on the DVD -- i.e. it
495 kes Minor Makefile fixes.
496 kes Put attach_dcr_to_dev in a subroutine.
497 kes Make attaching/detaching to/from a device use a flag and
498 only detach if actually attached.
499 kes Add dvd-simulator.in to scripts directory and add to configure.
500 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
501 This could be a cause of a number of drive reservation problems.
502 Note, this code is now in attach_dcr_to_dev().
503 kes Suppress doing Volume updates if it is a system job. This should
504 prevent the DVD label blocking.
505 kes Clear the freespace ok flag in a couple of strategic places.
507 kes Put removing zero sized spool part file in subroutine and
508 call from release_device().
509 kes Add Richard's patch for relabel to dircmd.c, but save and restore
511 kes Rework a lot of subroutines in dev.c to take dcr as an
512 argument. This is done to eliminate the usage of attached_dcrs
514 kes Change truncated_dvd to blank_dvd, which seems more suitable.
515 kes Apply most of Richard Mortimer's truncate patch.
516 kes Create lseek() method for DEVICE that takes dcr as an
517 argument. This is to eliminate the use of attached_dcrs in
518 lseek(). The calls to lseek_dev() must still be changed.
520 kes Apply Richard Mortimer's patches for printing an error
521 message in btape when a DVD is used, and to initialize traceback.
522 kes Added error message to btape when trying to access a file.
523 kes Move prototype of update_slots() to protos.h.
525 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
526 and FDJobStatus to the Director Python variables.
527 kes Make sure valid argument passed to str_to_utime() where Arno
529 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
530 I.e. part of two different patches.
532 kes Modify disk changer to simulate some of the error conditions
534 kes Make sure the close() call in the SD tools is just before the
536 kes Implement dir_get_volume_info() in bls using the patch from
537 Richard Mortimer but call find_num_dvd_parts().
538 kes Implement find_num_dvd_parts() that mounts and scans a DVD
539 and counts the parts.
540 kes Move the omode code in open_dvd() up so that the cannot
541 write on blank disk can check can be bypassed for read mode.
544 kes Disable normal data spooling for DVD writing which uses
545 a different spooling mechanism.
546 kes Apply patch from Richard Mortimer to ensure that the number
547 of DVD parts is correctly updated.
548 rbn Save installer details log in the Bacula directory as
550 rbn Add installer generation of client and storage templates
551 suitable for @inclusion on the director.
552 rbn Mark previously installed Win32 components read-only since
553 deselection doesn't do anything.
555 Version 1.39.22 beta released:
557 kes Fix logic error in handling error return from mtx-changer
559 kes Make status from SD aware of -1 (unknown) Slot status.
560 kes At Eric's suggestion make both the 'slots' and 'drive' commands
561 to the Storage daemon work even if the drive is busy.
562 kes Make two separate Win32 menu links for starting bconsole and
563 wx-console in winbacula.nsi
564 kes Apply DVD part_spooled patch from Richard Mortimer
565 richm@oldelvet.org.uk
566 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
567 rbn Fixed problems migrating settings from previous releases in
568 Win32 installer. Add Readme.txt with an option to show it on
569 the installer Finish page.
571 kes Use get_catalog_resource() to open catalog database
572 to ensure that ACLs are respected and that user is
573 correctly prompted for database.
574 kes Integrate multiple console/director patch from
575 Carsten Paeth calle@calle.in-berlin.de
576 ebl Add character substitution in Job/JobDefs WriteBootStrap.
577 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
578 kes Apply patch supplied in bug #656 to pass priority field
579 in the run dialog to the Director in gnome console
580 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
581 this will fix bug #627 where Bacula eventually gets
582 confused about what Volume it wants.
583 kes Add a new close_part() class in the SD to save the device
584 state around open/close_part/open for DVD writing. This
585 should fix the num_dvd_parts getting zeroed as reported by
587 kes Apply patch from Richard Mortimer that correct edit code
588 for debug output of st_size.
589 ebl Add support of encrypted data stream to bscan.
590 display data_len instead of data content (may be binary)
592 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
593 bcopy. Fixes bug #669 reported by Eric.
594 kes Fix incorrect number of arguments in SQL statement in
595 sql_get.c as reported by Eric.
597 kes Update examples directory.
598 kes Remove unused variable in winservice.cpp
599 kes Make Win32 make command build installer.
600 rbn Add new Install Type page, used to select between Automatic
601 and Custom installs. Automatic installs only prompt for
602 configuration items that can't be reasonably defaulted.
603 rbn Added Bacula logo to page headers.
604 rbn Added Upgrade support
605 - Configuration and component selection are migrated from
607 - Configuration of upgraded components is preserved and
609 - Configuration of new components is handled according to
610 the Automatic / Custom selection.
611 - Component selection is defaulted to previously selected
613 rbn Installation of Server components is disabled on
614 Windows 95, 98 and ME.
615 rbn Added URLs for support, info and upgrades to Bacula entry
616 in Add/Remove Programs.
617 rbn Added Version info to Bacula entry in Add/Remove Programs.
619 kes Correct dvd code that breaks tape labeling.
620 kes Implement Enabled on update slots.
622 kes When doing a label, pass the VolBytes back to the Director,
623 which puts it in the catalog.
624 kes Print an error message if the user attempts to prune an
626 kes Need to start using %ld when sscanfing 32 bit values.
628 kes Correct the counting of VolCatBytes for DVDs.
629 kes Add code to mount.c to require that VolCatBytes corresponds to
630 what is actually found when doing an append.
631 kes Update freespace only after writing on the DVD.
632 kes Remove code that blows away the current part in the spool file.
634 kes Apply new dvd-handler patch from Richard Mortimer.
635 kes Tweak so that debug level 20 shows only DVD commands.
636 kes Correct spooled_part flag in dev.c close() so that it is cleared
637 when the spool file is deleted or does not exist.
638 kes Print part number in read_records when eof hit (restore).
639 rbn Installer default changed to start services on new install.
641 kes Make find with no args in tree restore return error rather than
642 stopping the selection. Fixes bug #665
643 kes Rework DVD writing to ensure that the last part is written
644 on open_next_part when dealing with a spool file.
645 kes Correct the lseek_dev() routine to handle end point correctly
646 (bug introduced by me).
647 kes Allow part number to exceed num_dvd_parts in lseek_dev().
648 rbn Change make_session_key on Windows to use WIN32 APIs to produce
650 rbn Add new tool scsilist.exe which displays the changer, tape and
651 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
652 to add them to bacula-sd.conf.
654 kes Apply dvd-handler patch from Richard Mortimer.
655 kes Apply dvd error check patch from Richard Mortimer.
656 kes Apply bpipe race patch from Richard Mortimer.
657 kes Rework how DVD labels are handled and set append only
658 when part > num_dvd_parts.
660 kes Rework many features of DVD writing and reading. Added many error
661 messages. Most importantly changed part to represent the current
662 part number base zero. This makes current DVD writing incompatible
663 with previous version.
665 kes Add host:port to connect failure messages to FD and SD from Dir.
666 kes Add WhereACL to console ACL list. If nothing is specified, only
667 the default is permitted for restore. Otherwise, *all* allows any
668 path, or you can specify permitted paths. This should allow control
669 over where users can restore files. This is untested.
670 kes Modified message to add a ? (as in loaded?) when querying the autochanger
671 for what Slot is loaded.
672 kes Fixed the use of Slot, so that is more correctly maintained, thus
673 eliminating unneeded duplicate calls to determine what Slot is loaded.
675 kes Install man pages with 'make install'
676 kes wx-console crashes because of differences between Bacula and wxWidgets
677 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
679 kes correct improper indenting in wx-console/console_conf.c
680 kes update wx-console header copyrights
681 kes Fix bug #658 where wx-console mangles file/directory names containing
684 kes Add Media.Enabled flag to client backups for dotcmds.c
685 kes Enforce Media.Enabled=1 for a current restore to work.
686 kes Require restore case 3 to have sqlquery permission to work.
687 kes Remove obsolete del_MAC sql command.
688 kes Ensure that bscan creates Volumes with Enabled=1.
690 Version 1.39.20 beta released:
692 kes Correct missing Client table reference in SQL pointed out by
695 kes Fix Win32 build (new entrypoint, start baculafd).
697 kes Add -n option to bconsole to turn off conio.
698 kes Print JobIds to be migrated in Job Report.
699 kes Add additional user supplied notes to the messages part of
700 bacula-dir.conf concerning multiple email addresses.
701 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
702 kes Add more recent Feature requests to Projects file.
704 kes Apply Maritn's fix to src/win32/Makefile.
705 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
706 kes Implement pruning for Migration and migrated jobs.
707 kes Implement PoolOccupancy migration.
708 kes Implement PoolTime migration.
710 kes If doing a mount, look for a slot, and if specified pass it to
711 the SD so that it can load the autochanger.
712 kes Return DVD=1 flag if a label command is done to a DVD. This
713 permits setting VolParts to 1.
714 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
715 rework ua_label code based on DVD media type to use DVD flag returned.
717 kes Eliminate some compile warnings in dird_conf.c
718 kes Format the bytes field in the terminated jobs part of the status
719 command for the three daemons with suffixes to reduce print size
720 of backup bytes. Suggested by a user.
721 kes When not descending into a directory, print the File= name that
722 triggered it -- makes why not descending a bit clearer.
723 kes Do not unload autochanger when doing a list command -- basic code
724 from Eric Bollengier.
726 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
727 to build-depkgs-mingw32. It now handles two options -h to display
728 help and -C to reextract the source and apply the patches. The -C
729 option is useful for updating the source after new patches are
731 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
732 This allows updating to new versions without having to modify the
733 script and makes it easier to figure out which packages and which
735 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
736 as build-depkgs-mingw32 except they are built using Microsoft Visual C
737 and placed in the depkgs-msvc directory. There is also an
738 External-msvc file to describe the packages.
740 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
742 kes Fix bug #462 incorrect error message printed when client script called
743 from File= was not found.
744 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
745 do a rewind on Solaris when no tape is in the drive (Solaris does not
746 have the detailed errno found on Linux). Added Solaris specific code.
747 Note, this may apply to other OSes as well.
749 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
750 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
751 fix bug 648 - update sqlite script patches, lock out gnome2console
752 builds for platforms with gtk+ < 2.4.
753 Updated build_rpm.sh - add remote source directory, add switch for
754 signing, refine file names.
755 Updated spec file again for Mandriva build as they have this curious
756 custom of silently converting all manpages to bzip2 format just before
757 the final packaging step.
759 rbn Fixed the Windows Makefiles so that they won't accidentally try and
760 pickup binaries for the Unix build. This allows both the Unix
761 build and the Windows build to be built in the same tree without
762 interfering with each other.
763 rbn Fixed error handling and cleaned up mtx-changer.cmd.
764 rbn Added the rest of the database scripts. These are installed but are
765 not yet edited for variable replacement.
766 rbn Broke out the cats functionality from bacula.dll and put into new
767 separate dlls for each database type. At installation time the
768 correct one is copied to bacula_cats.dll.
769 rbn Eliminate the need to install the mysql.dll on client only builds.
770 rbn Moved dird/sql_cmds.c into the cats directory so all the database
771 specific #ifdefs were in the cats directory.
772 rbn Added a new sql_cmds.h with all the declarations for the variables
773 exported from sql_cmds.c.
774 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
775 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
777 kes Correct improperly formatted list command output reported by Dan.
779 kes Correct despool time calculation.
781 kes Remove previous changes to compat.cpp as they create problems.
782 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
783 kes Attempt to fix problems with the msg_queue crashing on Solaris
784 when Bacula is terminating, but problems remain.
785 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
786 name editing problems with too many \\?\es.
787 kes Fix some Bacula source code style problems in compat.cpp.
788 kes Add debug code to compat.cpp and convert non-Bacula debug code
791 kes Change the name of the technical notes file from kes-1.39 to
792 technotes-1.39. Prefix my messages with 'kes '.
793 kes Allow dequeue_messages() to be called twice. Should fix bug
795 kes Add Job type to bscan Job information output.
797 kes Update copyright date in program files, and for the most part
799 kes Implement %q in bsnprintf.c apparently I forgot it.
801 kes Make disk-changer sed command compatible with FreeBSD.
802 kes Make a first cut at a ReleaseNotes and ChangeLog for a
804 kes Make make clean descend into the src/win32 directory.
805 kes Fix some #ifdefing so that Solaris and FreeBSD compile
806 sys/stat.h was turned off.
807 kes Use suffix editing for new transfer rate messages.
808 kes Attempt to come up with a workaround which seems to be an OS
809 bug where write() returns EBUSY. IMO this should not happen.
810 It triggered in truncatebug test. The workaround retries using
812 kes Eliminate a strerror() call in a class method that failed with
814 kes Use rm -rf rather than rmdir to delete the src/win32/release
815 directory during make clean.
817 kes Make bscan ignore ACL streams.
818 kes Update projects files with new Feature Requests.
819 kes Generate current English and French manuals and upload
821 kes Update the home page to include the new British/French flags to
822 switch between translations. Work done by Alexandre Baron.
823 kes Make disk-changer script print an error message if the changer
824 directory is not defined.
825 kes Create a generic DB routine for getting an int (32/64 bit) from
827 kes Add more migration code.
828 kes Add a few more files to .cvsignore here and there.
829 kes Minor fixes for SD write rate and despooling rate.
830 kes Turn off new test code in src/console.c
834 kes Incremented the version number to signify that all of Robert's code
835 for Win32 that was in the branch is now integrated into the HEAD,
836 and that Eric has submitted code that we hope will provide limited
837 backward compatibility with 1.38 file daemons (more testing to be
839 kes I rationalized a few of the names of the variables (mainly jcr names)
840 that are used during migration as keeping three different jcrs at the
841 same time clear in ones head is not easy.
845 eb Tweak new runscript feature to work with 1.38.x FDs.
846 eb Correct crypto.c to fix segfault when restoring an encrypted stream
847 on fd which don't use rsa keys.
848 eb Add yes/no English keywords on localized yes/no questions.
850 kes Several important commits from Robert Nelson for code cleanup and
852 kes Modify console.c so that when conio is enabled, it converts \n to
853 \n\r before outputting to the console. Hopefully this will fix
854 the problems with expect in Perl that Eric saw.
856 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
858 kes Add Comment field to llist of a volume.
859 kes Allow true/false in some yes/no questions.
860 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
861 kes Remove a few /n's when scanning commands from another daemon. This
862 permits adding additional fields later.
863 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
864 kes Update README.mingw
866 kes Tweak authentication to work with 1.38.x FDs.
867 kes Tweak catalog make scripts.
868 kes Fix catalog upgrade scripts so that they work.
869 kes Correct despooling debug code to eliminate race condition.
871 kes Add additional fields as specified by Arno to LocationLog.
872 kes Add comment field to the Media record.
873 kes Add Time field to the Log record.
874 kes Correct migration SQL (thanks to Bill Moran) so that it
875 runs with PostgreSQL also.
876 kes Add spooling/despooling info in status output of SD.
878 kes Spend a lot of time integrating mkcdrec with the rescue disk.
879 kes Add VOLMGMT message class for volume management messages (none yet).
880 kes Add CATALOG as a destination. It goes into the LOG table.
881 kes Implement the Log table in the DB.
882 kes Implement the Location Log table in the DB (for user use).
883 kes At Eric's request add a run_scripts() just after blast_data in
886 kes Add Enabled column to Location, correct some typos in DB schemas.
887 kes Correct bug I introduced into RunScripts enum.
888 kes Add log table to Catalog
889 kes Purge original job migrated if the migration terminates normally.
890 kes Cleanup purging of files/jobs so that it is done only in a
892 kes Add new VOLMGMT message class.
893 kes Add Catalog message destination (user conf code remains to be written).
895 kes Modify read_record and friends to properly deal with migration
897 kes Update debug code in read_record.
899 ======================= Warning ==========================
900 Separate read and write storage in Jobs in the Director. This
901 is a major rewrite of some of the low level code and hence has
902 a high probability of introducing bugs.
903 ==========================================================
905 kes Move the job init code up to *before* the job is put into
906 the job queue (resource allocation queue). This permits the
907 job to establish whether it will read or write or do both.
908 kes Add name() methods to all the resource classes.
909 kes Implement separate read and write storage resource
910 allocation/deallocation in jobq.c
912 ======================= Warning ==========================
913 Implemented new method of getting the default Storage from the Media
914 record rather than from the MediaType for restore. As a fall
915 back, if no Storage is defined, use the MediaType. This
916 eliminates most all prompts if there are multiple MediaTypes
917 used. This is an important and fundamental change.
918 ==========================================================
920 kes Add more detail (Storage, Device) to list of volumes printed
922 kes More code in migrate. In particular start multiple jobs if
924 kes Probably overkill, but ensure that the bsr is unique even within a
926 kes Rework bsys.c drop() so that it now should work as expected.
927 kes Update a bunch of old copyrights -kes particularly in .h files.
928 kes Remove src/lib/bshm.c/h
932 ======================= Warning ==========================
933 All hash codes in the database are now kept in world
934 compatible base64 format (no = filling). This means that
935 all FileSets will be updated and if you are running
936 verify jobs, you must do an InitCatalog.
937 Authentication uses the new algorithm, but should be
938 backward compatible with 1.38.x
939 ===========================================================
941 kes Modify the authentication routines so that the 1.39.15 Director
942 always runs with the compatible binary to base64 code (same as
943 the rest of the world). It will however detect if an SD or
944 FD is running the old code and if that is the case, will use
945 the old algorithm for authentication. However, all consoles must
946 use the compatible algorithm, and all data entered into the database
947 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
948 use the compatible algorithm.
949 kes Rename the cram_md5 routine names to be slightly more appropriate
950 to what they are doing (challenge and respond).
951 kes Robert committed his #ifdef and header cleanup.
953 kes Fix a compiler warning in files/backup.c
954 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
956 kes Robert committed his low impact changes.
957 kes I removed a size_t from the jcr.h definition.
958 kes Update the tape regression scripts (still to be tested).
959 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
960 kes Require done or quit to exit from in memory tree restore.
962 kes Write install/uninstall of new manpages. There are now a
963 pile of man pages. Some of which need a lot of work.
965 ======================= Warning ==========================
966 The --mandir ./configure option now points to the top level
967 man directory. The man files will be installed under
968 mandir/man8 and mandir/man1 as appropriate.
969 ==========================================================
971 kes Add complete text of GPL to LICENSE.
972 kes Implement job report that indicates where Storage and Pool
973 came from -kes with overrides and Pool storage and NextPool,
974 it is all very complicated.
975 kes Create a few common subroutines for backup.c and migrate.c
976 kes Eliminate warning messages from tray-monitor.c
978 kes Apply fix for scheduler for missing unlock_jobs().
979 kes Clean out autoconf caches before rebuilding configure
980 kes Fix the FreeBSD pthreads lib define updated by Dan.
981 kes Add missing semicolon in src/console/console.c
982 kes Add Robert's enhanced version of build-win32-cross-tools
983 as well as his patch file.
984 kes Note, the new gcc options are likely to break building of
985 wx-console or the tray-monitor ...
987 kes Implement Robert's suggestion to suppress printing compile lines.
988 kes Detect GCC correctly (I hope)
989 kes If using GCC (actually g++) add the following compiler flags
990 -fno-strict-aliasing -fno-exceptions -fno-rtti
992 ===================== Warning =============================
993 Turn on new bsnprintf() code. This could cause print output
995 ===========================================================
997 kes Fix crypto when not using openssl. I previously overlooked this.
998 kes Eliminate crypto type punning problems by eliminating void * and
999 using uint8_t * instead.
1000 kes Harden authentication failure in FD by single threading errors
1001 and forcing a 6 second wait.
1003 ===================== Warning =============================
1004 Removed 'Accept Any Volume' directive.
1005 ===========================================================
1007 kes Major cleanup and simplification of regress using shell functions
1008 (more tests to be converted to new format)
1009 kes Add detection of 64 bit Irix as indicated by user.
1010 kes Increment catalog database id from 9 to 10.
1011 kes Add a few of the new database fields to the various C++
1013 kes Implement code to fill in the most important new fields (e.g.
1015 kes Ensure that most of the new fields are in create/get/insert/update.
1016 More work to be done.
1018 kes Update some very old licenses in src/cats.
1019 kes Modify the database format for handling Migration jobs:
1020 Add PriorJobId, RealEndTime to Job table
1022 Remove Stripe from JobMedia record (not used, wasting space)
1023 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
1024 Add Cost to Location table.
1025 kes Delete mac_record subroutines.
1026 kes Add new table values to create/update/get routines as appropriate.
1027 kes Update the update_tables and make_tables scripts.
1028 kes Make a first cut in using a union where multiple pointers (actually
1029 pointers to pointers) are stored.
1030 kes Make some changes to base64.c suggested by Robert and others and add
1031 a small amount of documentation.
1032 kes Add some changes suggested by Peter for Solaris (bregex...)
1033 kes Make runscript.h always built because it needs to be pulled into
1034 more places. In particular its RES was left out of a union.
1035 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
1036 This makes it slightly easier to detect uninitialized variables.
1038 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
1039 sometimes creates install problems.
1040 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
1041 Nelson's code. More to do.
1042 kes Convert a few store_bit to store_bool in filed_conf.c.
1043 kes DVD tweak to block.c as supplied by Uwe Muessel.
1045 kes Modify configure.in to check for typeof().
1046 kes In findlib/attribs.c use typeof instead of templates if possible.
1048 kes Implement partial error messages for src/filed/acl.c
1049 kes Fix return code to fail when doing update barcodes and
1050 Pool resource is not found. This previously caused Volumes
1051 to be labeled as cleaning tapes.
1052 kes Small updates to projects.
1054 kes Add Eric Bollengier patch for new RunScript directive. It breaks
1055 compatibility between dird and fd.
1057 kes Prevent DVD code from rewriting label if the device cannot be
1059 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
1060 fix Debian build bug.
1061 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
1062 kes Integrate manpages contributed by Jose Luis.
1063 kes Update projects file.
1064 kes Add manpages Makefile.in to configure.in
1065 kes Remove installation of bacula.8 in scripts directory.
1067 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
1069 O_NOATIME is a open() flag which makes it possible to read a file without
1070 updating the inode atime (and also without the inode ctime update which
1071 happens if you try to set the atime back to its previous value). It also
1072 prevents a race condition when two programs are reading the same file, but
1073 only one does not want to change the atime. It's most useful for backup
1074 programs and file integrity checkers (and bacula can fit on both
1077 Recent versions of the Linux kernel and glibc have support for it (the
1078 glibc support being mostly copying the O_NOATIME definition to
1079 bits/fcntl.h). If there's no support for it on the kernel, trying to use
1080 it does nothing (since the kernel ignores unknown flags).
1082 If the kernel has support for it, trying to use it either works, fails
1083 silently (mostly in remote filesystems), or returns errno=EPERM (if you
1084 are not either the owner of the file or root). A simple way to prevent the
1085 failure is to open the file without the flag and set it later with
1086 fcntl(F_SETFL), ignoring any EPERM errors.
1087 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
1088 of restarted jobs to complete (due to a destroyed pthreads conditional
1089 variable used by the message thread).
1090 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
1092 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
1093 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
1094 colons in query.sql file.
1095 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
1096 not to create orphans.
1097 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
1098 in restore long listing.
1099 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
1100 of incorrect MarkedId.
1101 kes Apply patch from adioso bug #616 to correct text in manual (replace
1102 Director with File daemon).
1103 kes Rework a few of the zlib changes so that they build properly.
1106 kes Move DIR 'run' command to SD before starting the message thread
1107 as suggested by Cristopher Hull to avoid a race deadlock from
1108 two threads using the bsock structure.
1109 kes Modify LICENSE to correct some problems pointed out by Debian.
1111 kes Correct EOF with no \n lex.c problem.
1112 kes Tweak compat.h compat.cpp and merge with apcupsd
1113 kes Add additional INFO messages if autochanger cannot be used.
1116 kes Simplify Win32 Makefile
1117 kes Correct count of buffers/bytes used by smartall.c
1118 kes Updated compat.h after porting apcupsd to MinGW.
1120 kes Work on getting wx-console building on MinGW. wxWidgets now builds
1121 started adding Makefile ...
1122 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
1124 kes Reloading a bad configuration file doesn't kill director any more.
1125 Thanks to fix from Eric Bollengier.
1127 kes Fix problem of accents with new Win32 code.
1128 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
1129 works in the MinGW build with the exception that there
1130 is a problem with accented characters -kes i.e. there is
1131 some mapping problem with wide characters.
1132 kes The code no longer compiles with Microsoft VC++.
1134 kes Start implementing Christopher's St.Bernard code.
1135 kes Add Christopher's mods for opening files.
1136 kes Strip \r \n from Win32 error messages (Christopher)
1137 kes Add more info about Win32 system if unknown (Christopher)
1138 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
1139 kes Fix a number of incorrect strings marked for translation, when
1140 they should not be (e.g. commands).
1141 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
1142 Patches supplied by user in bugs #608 and #599.
1143 kes Use most recent of st_ctime and st_mtime in restore tree DIR
1144 listing. This fixes some problems with Win32 printing incorrect
1146 kes Correct the clock shift comm time calculation between the DIR
1147 and the FD. It was added rather than subtracted.
1148 kes Strip all backslashes in filenames to be restored on Win32
1149 machines -kes the names should all be in Unix format, and if
1150 there are any backslashes it is most likely due to an improper
1151 FileSet definition, and the files will not otherwise be
1153 kes Remove lib/regex.c (replaced by bregex.c).
1154 kes Delete src/win32/License.txt
1155 kes Modify installer to install LICENSE
1157 kes Fix bug in build-win32-cross-tools script reported by Howard
1158 kes Implement cross compiled bconsole
1160 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
1161 kes Write first cut of README.mingw32
1162 kes Add back ua_label barcode fix from Rufolf Cejka.
1163 kes Integrate the majority of the Mingw cross-tools submission
1164 made by Howard Thomson. Everything compiles, with zlib, openssl,
1165 and VSS turned off. Linking needs a pthreads library ...
1167 kes Add 'Dir Status' button to the gnome console.
1168 kes More work on migration.
1169 kes Restore non-compatible base64 coding to permit compatibility.
1170 kes Display heap stats in Storage daemon without debug level.
1172 kes Integrate most of the MinGW changes -kes more to do.
1174 kes Implement using pg_config for finding PostgreSQL files.
1175 Fixes bug #600. Patch supplied by user.
1176 kes Remove -t option from mktemp in mtx_changer.in and use
1177 working directory. Fixes bug #578.
1178 kes Update job start time after the any run before job so that
1179 files created by the script are only backed up once. Fixes
1181 kes Strip trailing newline only from filenames entered in
1182 the restore command when reading a file. This permits
1183 the user to enter filenames with trailing spaces. Fixes
1184 bug #549. The user supplied a patch that I modified slightly.
1185 kes Use the most recent time (st_mtime, st_ctime) in the dir
1186 command in restore. This gives the user a better idea of what
1187 the newest file really is. This fixes bug #574. The fix
1188 was suggested by the user.
1189 kes Implement a compatible version of base64. This permits external
1190 programs to duplicate Bacula's base64 algorithm using standard
1191 routines. This fixes bugs #296, and 565. Patch submitted by
1193 ================= Note ========================
1194 Previous Signatures stored in the database are no longer
1195 compatible with this. The main downside is for Verify jobs,
1196 and doing an InitCatalog run will fix the problem. Also, the
1197 authentication between the deamons is changed, so all daemons
1198 must be simultaneously upgraded.
1199 ==============================================
1200 If you don't like this fix, set:
1201 const bool compatible = true;
1203 const bool compatible = false;
1206 kes Ensure that DB signature is never NULL.
1207 kes Ensure that DB table names are not translated.
1208 kes Fix scheduler to handle time skew (eg daylight savings).
1209 kes Fix scheduler to use lock_jobs() to avoid most problems
1210 with reload. Window is now milliseconds.
1212 kes Apply patch from Christopher Hull
1213 kes Allow multiple connections to database with different
1215 kes Invalidate the scheduler when doing a reload. Fixes seg
1216 fault, but still 60 second window.
1217 kes Additional info in Reschedule message.
1218 kes Use set_jcr_job_status() everywhere to prevent loss of
1220 kes Display peer IP in FD if error from connecting DIR.
1221 kes Don't increment file count for DIRBEGIN.
1222 kes Replace illegal characters in Win32 filename by _.
1223 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1224 kes Hash hard link filenames rather than linked list.
1225 kes Fix for security failure in chdir on Win32.
1226 kes Add CreateDirectoryA/W win32 API entry points.
1227 kes Add /silent option to Win32 FD for Install/Remove service.
1228 kes Always print Heap statistics in FD.
1230 kes Remove the -f option from the chown in Makefile.in for more
1232 kes Change setting the group in Makefile.in to use chgrp for
1234 kes Implement a write_store and read_store to replace
1235 dirstore in reserve.c
1236 kes Implement a Bacula read/write lock for Python rather
1237 than using the Python lock to avoid recursive problems.
1238 kes Correct the uninstall directory names in filed/Makefile.in
1239 as reported by a user.
1241 kes Correct some problems with database creation (new tables).
1242 kes Replace a bunch of old 0x%x by %p.
1243 kes Get first cut of Migration with Job selection working.
1245 kes Change store_bit() to store_bool() for the Spooling in
1246 dird_conf.c -kes bug reported by Robert Nelson.
1248 kes Correct Makefile bug found by Dan Langille.
1250 kes Correct Makefile for Solaris /bin/sh
1251 kes Correct mtx-changer.in for Solaris /bin/sh
1252 kes Abort if a conf resource does not have a Name =
1254 kes Change the name of the regex program to bregex.
1255 kes Add the bwild program to the tools directory. It is similar
1256 to the bregex program.
1257 kes Implement create bregex.h and bregex.c in src/lib from the
1258 Python regexp program.
1259 kes Use the new bregex.c to implement Regex expressions on Win32.
1261 kes More work on migration.
1262 kes Implement wild program in tools directory for testing
1263 wild-cards. Almost identical to the regex program.
1264 kes Up port VSS single thread locking code.
1265 kes Replace N_(..) by NT_(...) to inhibit translation of
1267 kes Modify Makefile to change the permissions on Working Directory
1268 to 770 if the directory is created.
1269 kes Do not fail the Makefile if changing the permissions or
1270 owner/group on WorkingDir fails.
1271 kes Remove early selection of Scratch Volumes in the recycling
1273 kes Correct the old recycling algorithm so that Scratch Volumes
1274 are selected when looking for a Volume in the changer.
1275 kes Correct a typo in the Verify SQL reported by Joe Park.
1277 kes Remove automatic case folding on Windows FDs. You must
1278 explictly use the 'Ignore Case = yes' option.
1279 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1280 scratch volume in an Autochanger early in the 'recycling'
1283 kes Make weof() and clrerror() methods of class DEVICE.
1285 kes Tweak license to include Microsoft restrictions.
1286 kes Move mysql.reconnect to after real_connect(). Thanks to
1287 Frank Sweetser for the patch.
1288 kes Disallow a backslash in a File = directive (Windows junk)
1289 unless the string is quoted.
1290 kes Apply Eric's patch to ua_label.c so that daemon protocol
1292 kes Add NT_ definition for strings that should not be translated.
1293 kes Apply NT_() to ua_label.c
1294 kes Remove timed wait for VSS on Win2K3 as it is not yet
1296 kes Correct bacula.in script to reference bacula-ctl-xx in the
1297 sysconfig directory rather than the bin directory.
1299 kes Fix a long standing bug in the bacula start/stop scripts.
1300 kes Attempt to add the new bacula-ctl-* files to the rpm.
1301 kes Switch to using typeof() for list traversing to avoid
1302 as many FC5 g++ compiler warnings as possible.
1304 kes Split the bacula start/start script into four files:
1305 bacula -kes starts and stops calling other scripts
1306 bacula-ctl-dir -kes starts/stops the director
1307 bacula-ctl-fd -kes starts/stops the File daemon
1308 bacula-ctl-sd -kes starts/stops the Storage daemon
1310 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1311 kes Correct editing of JobId from int to int64 in fd_cmds.c
1312 kes Eliminate FileSet name race with bash_spaces() and multiple
1313 threads by bashing in a local.
1314 kes Fix error return from 'use storage' to print a correct error
1315 message rather than nothing.
1316 kes Correct false re-read last block error message when two jobs
1317 are simultaneously writing at the end of a tape.
1318 kes Simplify exit conditions in the reserve.c code to avoid
1319 possible non-release of reservation_lock().
1320 kes Suffle lock order in reserve to avoid deadlock between
1321 reservation lock and device mutex.
1323 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1324 tracking this down for me !!!! as it broke the Win32 build.
1326 kes Integrate addition of line count limitation to bsmtp -l from
1327 Sebastian Stark <stark at tuebingen.mpg.de>
1329 kes Implement regex test program in tools directory.
1330 kes Attempt to fix time problem with bsmtp with foreign langs.
1331 kes Add strip_trailing_newline() submitted by user.
1332 kes Implement regex matching in migrate.c
1334 kes Fix bug #537 to allow arbitrary time to mount a volume for
1335 restore, if polling is turned on.
1336 kes If dir_user or dir-group is specified in ./configure apply it to
1337 the working-dir. Fixes bug #533.
1338 kes If rescheduling a job cancel the previous incarnation with the SD.
1339 Fixes bugs #566 and 557.
1340 kes Fix bug #567 do_message() definition type conflict.
1343 kes Add more jcr methods and make mutex and use_count private.
1344 kes Create lock/unlock methods for jcr.
1345 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1346 records to get to seek position.
1347 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1348 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1349 terminates correctly by doing pthread_kill(). Do not destroy
1350 SD cond wait variable between executions of the job. Use local
1351 mutex for cond variable to avoid blocking jcr chain. Fix poor
1352 use of jcr use count in jobq.c for restarted jobs.
1353 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1354 lib/jcr.c -kes prevents locking the jcr chaing.
1355 kes Apply patch from bug #564, which corrects listing volumes with
1356 multiple autochangers. Apply same fix to next volume list.
1357 kes Fix bug #562 where restore bootstrap file is not unique.
1358 kes More details in implementing David's migration syntax proposal.
1359 kes Save and restore dcr when swapping drives so that if we have
1360 a write dcr it is not lost.
1361 kes Use new routine lock_reservations() to lock the reservations
1362 system, and call it while looking for a volume in askdir.c.
1363 This could possibly fix bug #543.
1364 kes Stop SD command loop if job is canceled.
1367 kes Remove old code from findlib/create_file.c
1368 kes Rename mac.c migrate.c
1369 kes Add user friendly display of VolBytes in job report.
1370 kes Rename target... to previous... to make it a bit easier to
1372 kes Add selection type and selection pattern to Migration (idea
1373 given by David Boyes).
1376 kes The po files should now be current.
1377 kes Fix new sql_use_result() code to properly release the
1378 buffers in all cases.
1379 kes Use the keyword ujobid to mean the unique job id; job or jobname
1380 to mean the Job name given on the Name directive, and jobid to
1381 be the numeric (non-unique) job id.
1382 kes Allow listing by any of the above.
1383 kes Add the user friendly job report code for reporting job elapsed time
1384 and rates with suffexes from John Kodis <kodis at comcast.net>.
1385 kes Add Priority and JobLevel as Python settable items.
1386 kes Use TEMPORARY table creation where the table is created by
1388 kes Add new code submitted by Eric for waiting on specific jobid.
1389 kes Add ACL checking for the dot commands.
1390 kes Fix restore of writable FIFOs.
1391 kes Fix a bug in bpipe where the string was freed too early.
1393 kes Modify the Python class examples to inherit object -kes new way
1394 of defining classes. Patch from Felix Schwarz.
1395 kes Implement jobuid to replace old usage of job in keywords as
1396 suggested by Eric Bollengier.
1397 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1398 wait (wait for all jobs to stop)
1400 wait jobuid=unique id
1402 kes Implement write variables for Python to set Priority (anytime), and
1403 Job Level, only during JobInit event.
1405 kes Fix the block listing bug pointed out by Arno.
1406 kes Update the po files at Eric's request.
1408 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1409 accept time qualifiers.
1410 kes Make catalog respect ACL.
1411 kes Add recycle count to Media record.
1413 Changes to 1.39.6-beta1 24Feb04
1415 kes Add Rudolf Cejka's new rc-chio-changer.
1416 kes Implement pulling Volume from Scratch Pool if the
1417 Volume is in the autochanger.
1418 kes Implement additional command arguments for update Volume.
1422 kes Back port changes to 1.38.5
1423 kes Fix recycle SQL for StorageId.
1424 kes Fix misplaced quote in mtx-changer script.
1426 kes Note. Your database must be updated, or you must create
1427 a new database. I have not yet incremented the database level.
1428 kes Add Location table.
1429 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1431 kes Implement create/get mac record in database for adding extended
1432 Migration data to the job record.
1433 kes Add new MAC table to update/make database scripts.
1434 kes Return Storage name used when getting VolumeNames for a job.
1435 kes Change bsr file keyword Storage to Device, which is more accurate.
1436 kes Ensure that Mac records are pruned/purged.
1437 kes Tweak SD tools to deal with changing media type.
1438 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1439 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1440 that the subroutine can switch devices, and hence dcrs.
1441 kes Modify the multiple MediaType read code to re-use the same
1442 dcr when switching devices. This makes the code much more
1444 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1445 from a table for restore.
1446 kes Add Storage name to VolParams, but it really should be Device.
1448 kes Add disk-changer to scripts directory + configure/Makefile
1449 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1450 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1451 kes Implement new store_bool that stores in a bool.
1452 kes Add true/false to yes/no conf directives.
1453 kes Make first cut at changing appropriate store_yesno to store_bool.
1454 kes Complete implementation of Pool storage devices.
1455 kes Move starting clones to job.c
1456 kes Move create_restore_bootstrap_file() to job.c
1457 kes Make copy_storage() more general to be able to handle
1459 kes Cleanup a lot of migration code for manual running, including
1461 kes Move getting a scratch Volume into a subroutine.
1462 kes Make all places a Volume that is added to a pool to
1464 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1465 kes Fix segfault in restore command when no value specified.
1466 kes Start adding code to handle multiple MediaTypes in restore.
1467 kes Eliminate race condition in getting Volume name for
1468 two drive autochanger.
1469 kes More debug code in autochanger.
1470 kes Add storage keyword to bootstrap file, add parsing.
1471 kes Move slot in bsr file into Volume record as there will be
1472 a different slot for each Volume.
1473 kes Create reserve.h
1475 kes Implement Pool storage overrides.
1477 kes Implement first cut of Migration.
1478 kes Implement mysql_use_result() from patch by Karl Hakimian.
1479 This reduces significantly the memory consumption during
1480 the restore tree building, and hence runs faster too.
1481 kes Implement StorageId patch supplied by user (reggie) in bug
1482 #536. This should permit Bacula to work correctly with two
1484 kes Implement Job listing variations suggested by a user.
1485 kes Move updating bootstrap code in backup.c to subroutine
1486 update_bootstrap_file().
1487 kes Add new job status elapsed time and bytes written user
1488 friendly job report output patch sent by John Kodis
1489 <kodis at comcast.ne>.
1490 kes Implement a storage list in Pools.
1491 kes Separate out setup_job() code from run_job().
1492 kes Get migration working -kes lots of changes in mac.c in both
1494 kes Apply patch from user (Eric Bollengier I think) that fixes a
1495 DIR crash when no arguments are supplied to a dot command.
1496 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1497 kes Fix command arg name->volume in label command of gnome-console.
1498 kes Fix SD acquire.c to release correct DCR by explicitly testing
1499 on the dcr address rather than trying to devine if it is a read
1500 or write dcr. This failed in error conditions when the device was
1504 kes Apply user supplied patch for more readable rate output
1506 kes Continue implementing migration.
1507 kes Implement support for removable filesystems in SD.
1508 kes Ensure that btraceback scripts can be read by anyone.
1509 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1510 kes Correct bug where canceling restore before the FD contacts
1511 the SD causes the drive to be left in read mode.
1512 kes Move ofline_or_rewind into DEVICE::close().
1513 kes Eliminate close_device.
1514 kes Convert several dev subroutines to methods (e.g. bsf,
1516 kes Eliminate force_close_device().
1517 kes Implement Device Type directive in Device resource that
1518 can have values File, Tape, Fifo, DVD, or Prog.
1519 kes Add has_cap() method to Device.
1522 kes Add patch from bug #527 to allow RedHat user to specify
1523 options/user/group for starting each daemon in
1524 /etc/sysconf/bacula.
1526 kes Add two new queries to query.sql provided by Arno. One
1527 list volumes known to the Storage device, and the other
1528 lists volumes possibly needing replacement (error, ...).
1530 kes Add periodic (every 24 hours) garbage collection of memory
1531 pool by releasing free buffers.
1533 kes Correct bug counting sized (for display only) in smartall.c
1534 kes Print FD mempool stats if debug > 0 rather than 5.
1536 kes Make db_lock() mutex error fail the job rather than abort
1537 Bacula. Canceling the job caused the mutex to fail.
1538 kes Correct bug in alist.c that re-allocated the list if the
1539 number of items goes to zero.
1540 kes Move the reservation system thread locking to the top level
1541 so that one job at a time tries all possible drives before
1543 kes Implement a reservation 'fail' message queue that is built
1544 and destroyed on each pass through the reservation system.
1545 These messages are displayed in a 'Jobs waiting to reserve
1546 a drive' list during a 'status storage='. Note, multiple
1547 messages will generally print for each JobId because they
1548 represent the different problems with either the same drive
1549 or different drives. If this output proves too confusing
1550 of voluminous, I will display it only when debug level 1
1551 or greater is enabled in the SD.
1553 kes Add enable/disable job=<job-name>. This command prevents
1554 the specified job from being scheduled. Even when disabled,
1555 the job can be manually started from the console.
1556 kes During 'update slots' clear all InChanger flags where the
1557 StorageId is zero (old Media records).
1559 Beta release 1.38.4:
1561 kes Fix autochanger code to strip leading spaces from returned
1562 slots number. Remove bc from chio-changer.
1563 kes Back port a bit of 1.39 crypto code to reduce diffs.
1564 kes Fix first call to autochanger that missed close()ing the
1565 drive. Put close() just before each run_program(). Fixes
1568 kes Add PoolId to Job record when updating it at job start time.
1570 kes Pull in more code from 1.39 so that there are fewer file
1571 differences (the new ua_dotcmds.c, base64.h, crypto.h
1572 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1573 util.c. Aside from ua_dotcmds.c these are mostly crypto
1575 kes Implement new method of walking the jcr chain. The
1576 incr/dec of the use_count is done within the walking
1577 routines. This should prevent a jcr from being freed
1578 from under the walk routines.
1583 kes Start implementing Verify list output.
1584 kes Move the suitable_drive flag to a better place to prevent
1585 premature termination of the reservation if all drives
1586 are busy -kes should fix Arno's diff/inc pool failures.
1588 kes Add mutex to single thread VSS code in Win32.
1590 kes Simplify code in askdir.c that waits for creating an appendable
1591 volume so that it can handle multiple returns from the wait
1593 kes Modify the wait code to permit multiple returns.
1594 kes Return a zero when 'autochanger drives' is called and
1595 it is not an autochanger.
1596 kes Make rewind_dev() a method taking a DCR as an argument.
1597 This permits closing and reopening the drive if the
1598 rewind fails as happens if the drive was loaded while the
1599 file descriptor was open. This refreshes the file descriptor.
1600 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1601 if the device is open or not. This should eliminate
1603 kes Return error if reserve cannot find at least one suitable device.
1604 kes Make wait_for_sysop() return correct state information.
1605 kes Fix Win32 state file problem. write was not using compat
1606 code. This should fix bug #500.
1608 kes Modify gui on command to set only GUI mode and not batch.
1609 kes Modify .messages command to always print messages regardless
1611 kes If GUI mode is on, suppress automatic printing of
1613 kes Delete old bnet packet code.
1614 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1615 wx-console. -kes not implemented because bconsole must be updated.
1616 kes Modify restore command in wx-console to set gui on and to use
1617 only .messages instead of messages. Hopefully this fixes bug
1619 kes Fix seg fault in exit of acquire when canceling a job --
1620 reported by Wolfgang Denk
1621 kes Pull in latest reservation system changes from 1.38
1622 kes Make .messages command always print messages regardless
1623 of the automessages flag.
1625 kes Fix seg fault if user labels a drive directory bug #513
1626 kes Remove quotes around Version as it breaks things.
1628 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1629 kes Apply sparse code fix for raw drives and fifos. Bug 506
1630 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1632 kes Correct reservation system to do a last ditch try
1633 for any mounted volume, then anyone anywhere.
1634 kes Add quotes around table Version because of
1635 error in MySQL 4.1.15 -kes bug report submitted.
1636 kes Correct some minor problems with btape in the fill
1638 kes Updates to ssh-tunnel from Joshua Kugler.
1639 kes Added a report.pl program from Jonas Bjorklund.
1640 kes Simplify the O_NONBLOCK open() code for tape drives,
1641 and always open nonblocking.
1642 kes Do not wait for open() if EIO returned (shouldn't happen).
1643 kes Eliminate 3 argument to tape open().
1644 kes Correct the slot # edited in the 3995 Bad autochanger unload
1646 kes With -S on bscan (show progress) do not divide by zero.
1648 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1649 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1650 kes Remove unused code in wait_for_device.
1651 kes Make wait_for_device() always return after 60 seconds of wait.
1655 kes Add stubs for non-crypto build.
1657 kes Use localhost if no network configured
1659 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1660 kes Remove debug print.
1661 kes Add bail_out in error during state file reading.
1663 kes Merge changes made to 1.38.3 into HEAD
1664 kes Add stubs for pygtk-console code
1665 kes Create Makefile.in for pygtk-console code
1667 kes Merge updates into 1.38 branch
1668 kes Update specs to include mysql4 define.
1669 kes Fix when attributes are sent, must be after binit().
1670 kes Stop read_record() if status not ok in second loop.
1671 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1672 and partial records in read_record(). This allows bscan
1673 to get FileIndex at EOT correct.
1674 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1676 kes Fix Win32 built to work with new crypto code.
1677 kes Apply patch supplied by user (slightly modified) to fix
1678 correct detection of holes in block devices and FIFOs.
1680 kes Apply patch supplied by user (slightly modified)
1681 to fix SD hang with multiple pools and bad client
1682 IP. Fixes bug # 508.
1684 kes Add nagios plugin to the examples directory. Submitted by
1686 kes Remove warning message about multiple saves of hardlinked files
1687 from find_one.c as it can generate too many warning messages.
1688 kes Modify most restore error messages to be queued so that they
1689 appear at the end of the job rather than mixted with the restore
1690 listing where they could be 'lost'.
1692 kes Reset timeout values before select() per patch from
1693 Frank Sweetser for problems with non-blocking sockets.
1694 kes Unlink the state file if either reading or writing it gets
1695 errors. Hopefully this will fix Win32 exit problems.
1696 kes Add sanity check in append.c to ensure that dcr is not NULL.
1697 This can happen if multiple drive autochanger SCSI control
1698 channel and drive indicies do not correspond.
1700 kes Get next volume from Scratch pool before creating a volume.
1701 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1702 kes Remove argument from create_bacula_database for SQLite as it
1704 kes Add back index code so that two drive autochangers can get
1706 kes Change a bunch of debug levels to aid debugging autochangers.
1707 kes Fix reservation so that mutexes are properly applied.
1708 kes Rework reservation algorithm so that two drives can be used
1711 kes Landon merged his data encription changes into the HEAD
1712 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1713 If this patch is applied, the number of days can be specified with
1714 'list nextvol days=xx'
1716 'status dir days=xx'
1717 My use case is to be able to preview the next scheduled job (and the
1718 next tape to be used) on fridays if there are no scheduled jobs during
1722 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1723 kes Fix malformatted bnet error message that caused seg fault
1725 kes Applied user patch to improve README.vc8 in src/win32.
1727 kes Add Migrate, Copy, Archive Job types (some where there)
1728 kes Correct some more editing of JobId's (for 64 bit compatibility).
1729 kes Ensure that StorageId is stored in Media record when ever possible.
1730 kes Add Migration Job to Job.
1731 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1732 Next Pool to Pool resource.
1733 kes Add more code to mac.c (migration archive copy).
1734 kes Change Start Storage daemon job to require read and write storage
1736 kes Pass read storage data to SD as well as write storage data.
1737 kes Remove old code from winservice.cpp
1738 kes Break on error in scan.
1739 kes Fix typo in signal.c
1740 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1741 kes Cleanup how find_device() works.
1742 kes Add read output to Status in SD.
1745 kes Add red-black btree routines
1747 kes Remove abs() in bfile.c so that it compiles on Solaris.
1750 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1751 kes Fix bnet-server bug found on OpenBSD. Bug #486
1752 kes Fix cancel failure bug. Bug #481
1753 kes Fix failure when Pool name has spaces. Bug #487
1754 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1755 kes Fix a couple of free()s in src/filed/acl.c
1756 kes Fix memory overrun in bfile.c in building OS X resource
1757 fork filename. Bug #489
1758 kes Add Pool name to SD status output.
1760 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1761 kes Make sure to set storage before trying to set drive.
1762 kes Add bacula_mail_summary.sh to examples directory. It makes
1763 a single email summary of any number of jobs. Submitted
1765 kes Make sure when we do a mount to unblock the device even
1766 if the drive could not be opened.
1768 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1769 and correct a few minor problems to make it build on Linux.
1771 kes Remove delete of CVS from all Makefiles
1772 kes Fix seg fault when clicking on Add button in wx-console
1773 restore panel. Bug #470.
1774 kes Fix copyright date and URL typo -kes bug #468.
1775 kes Change autostart install for FreeBSD to look for rc.conf
1776 rather than rc.local as suggested fix for bug #466.
1777 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1778 grant on status. Bug #465
1779 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1780 update script. Bug #464
1781 kes Tweak #ifdefing a bit in new Win32 stream code.
1782 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1783 kes Add documentation of performance #defines
projects / bacula / bacula / blob