1 Technical notes on version 1.39
5 kes Add Landon's refactor of restore Feature request to the
7 kes Tweak debug levels and messages for examining the disk
10 kes Cleanup some of the error termination code in migration.
11 kes Separate read/write source strings to keep track of where
12 storage devices are used in a job.
13 kes Implement a new method of keeping track of which storage
14 device is used in a Job. USTORE keeps both a pointer to the
15 resource and to the source string.
16 kes Modify all code to use new storage set subroutines in job.c
17 kes Modify migrate.c so that the definitive selection of the storage
18 resource is done in the do_migration_init() routine prior to
19 the job going into the job queue. This permits accurate
20 deadlock detection (same read and write storage resource).
21 kes Remove bfill from btape (I think it was a left over stub).
23 kes Make sure that the storage for a job is pulled first from
24 the Pool and if not from the Job.
25 kes Ensure that either the Pool or the Job specifies a Storage
28 kes Start applying new FSFE copyright.
30 kes Add additional error messages in acquiring a drive for read.
31 kes Make WritePartAfterJob the default so that the last DVD part
32 always gets written to the DVD by default.
33 kes Add additional error messages in migration.
34 kes Suppress redundant error messages in migration (possibly more to do).
35 kes Apply Martin's fix (updated to 1.39) that takes into account
36 run storage overrides in the Director status display.
37 kes Implement, but turn off the submitted code that sets the EOT
38 model on FreeBSD machines. Turning on this code is too risky at
39 this point in the development.
41 kes Implement unique dbid routine for migration to prevent the same
42 JobId from being migrated twice. This should fix bug #709.
44 kes Apply Jaime Ventura's 'mail on success' patch.
45 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
46 if memory usage gets too big.
47 kes Tweak migration to ensure that read/write devices are different.
49 kes Create an AUTHORS file to list Bacula contributors.
50 kes Add Richard Stallman's four GPL freedoms to LICENSE
51 kes Require the conf file to have a valid NextPool for writing the
54 ebl Enable RecycleCount in catalog.
55 ebl Fix "echo python | bconsole" segfault
57 kes Implement code to pass the MediaId to the SD. The SD then uses
58 this MediaId when creating JobMedia records. This fixes a bug
59 with Migration where the MediaId got set to the second Volume
60 read rather than the write Volume. Possibly (unlikely) fixes
62 kes Remove NextPool from Job resource.
63 kes Edit a few numbers in the restore dialog with commas.
64 kes Note, the DIR<->SD protocol has changed.
66 kes Replace () by {} in configure.in for proper HP configuration.
67 kes Shorten some lines over 80 characters in filed/backup.c
68 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
70 Version 1.39.28 released:
72 kes Change error message 'illegal' to 'invalid' -- bug #707
73 kes Add rather primitive device resource deadlock detection in
74 the job queue handler. It detects the same read and write device
75 for migration and cancels the job.
76 kes Start adding a unique_dbid_hander() routine in migration to avoid
77 duplicate mediaids and duplicate jobids.
78 kes Add patch from bug #708 to permit relative paths such as ../xxx
79 in the restore tree routine.
80 kes Add Eric Bollengier's patch to reduce locking time in the SD after
81 despooling, and thus many jobs finish faster.
82 kes Correct locking order of reservations lock and device mutex in
83 reserve.c -- this should correct Arno's deadlock that occurred
84 when doing mount/unmount at the same time a job is reserving a
87 rbn Fixed problems with encryption when combined with compression
88 or sparse files. Unfortunately this means that all previous
89 encrypted backups can't be restored.
90 rbn Fixed problem in bfgets with Windows and Mac end of lines.
91 rbn Fixed bug in Windows version of close_bpipe() that cause programs
92 like bsmtp() to hang waiting for the pipe to be closed. Fixed
93 binary file type problems in open_bpipe().
94 rbn Fixed a number of bugs in the mysql DB scripts.
96 ebl Fix broken runscript on director. (RunBefore, RunAfter)
97 ebl Use M_ERROR instead of M_FATAL in runscript.c
99 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
100 rbn Ignore UTF-8 marker at the start of .conf files.
101 rbn Add stab2cv to 3rd party dependencies. This is a utility I
102 wrote that is licensed under the GPL and available on SourceForge.
103 It converts the stab debugging info generated by gcc into Codeview
104 format. Currently it just translates function names to global
105 symbols. This is sufficient to get reasonable stack traces from
106 Dr Watson and to look at minidumps.
107 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
108 rbn Enable Windows XP look and feel for the tray icons and wx-console.
109 rbn Add Windows specific FileSet example to bacula-dir.conf.
110 rbn Reorganize Start menu so that documentation and configuration are
113 rbn Change daemons and utilities so that if -c is omitted from the
114 command line AND there is no configuration file in the current
115 directory then the 'standard' configuration file (eg
116 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
117 doesn't contain any path separators AND there is no configuration
118 file by that name in the current directory then the 'standard'
119 configuration file directory will be searched for a file by that
121 rbn Fixed restore on Windows so that backslashes as path separators works.
122 rbn Add missing query.sql file to Windows installer.
123 rbn Fixed Windows versions of catalog backup scripts.
125 kes Fix optional files in Makefile.in of src/filed that caused
126 a syntax error when using no optional files.
128 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
129 messages; there is no reason to attempt to load a private key.
130 from master key files.
132 Version 1.39.26 released:
134 kes Apply the three patches from Richard Mortimer.
135 bacula-reposition.patch, bacula-tape-reopen.patch, and
136 bacula-eod.patch. This corrects tape positioning on older devices,
137 and also a problem with btape.
138 kes Apply fix from bug report #696 where writing to a FIFO does not
139 work due to a dumb typo.
140 kes Unlock the tape door before the file descriptor is released. This
141 should fix lots of somewhat subtle failures when using an autochanger.
143 kes Correct mtx-changer bug that I introduced in a recent commit, and
144 pointed out by Robert Nelson -- thanks.
145 rbn Fix Windows' daemons so that messages print to stdout if not
146 running as a service.
147 rbn Add daemon name to trace file name (eg bacula-dir.trace).
148 rbn Fix environment variable expansion in directory names on Windows.
149 rbn Fix autochanger support in fill command.
150 rbn Update SQL scripts to match Unix versions.
151 rbn Fix daemon usage displays.
152 rbn Cleanup bacula-dir.conf template.
153 rbn Install openssl.cnf so that the openssl.exe installed in the
154 Bacula\bin directory can be used to generate keys and
155 certificates for TLS and encryption.
156 rbn Fix cleanup of spool files on Windows.
157 rbn Remove /silent option from daemons on Windows. The new default
158 is the same as the old /silent. To enable the message boxes that
159 previously were suppressed by /silent you must add /debug instead.
160 NOTE: As a result of this change, the first time you upgrade from
161 a previous version of 1.39.x you will receive the message
162 boxes when the remove of the old services succeeds. This
163 is the same behaviour as when migrating from a version prior
165 However, going forward, these message boxes will not appear on
166 upgrades or new installs.
167 rbn Add new /debug option. This option enables the message boxes that
168 previously were suppressed by the /silent option. In addition the
169 daemons running as services will open a console window if this
171 rbn Fix bug with service not being removed on migrated installs. This
172 should correct those cases where the file daemon install was failing
173 when upgrading from versions prior to 1.39.x.
175 kes Turn on heap reporting in Dir with zero debug level.
176 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
177 send the same message to stdout.
179 kes Begin work on new GUI 'console'.
180 kes Make configure look in non-standard MySQL library directory
182 kes Make mtx-changer automatically configure the autochanger wait
183 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
185 kes Correct drop_sqlite_tables.in script to not delete the database.
186 kes When writing to a log file, close and reopen the file descriptor
187 if there is an error writing the file.
188 kes Modify the autochanger loaded?, load, and unload commands to print
189 the full text of any mtx output if there is an error. Helps to
190 ease diagnosis of autochanger problems.
191 kes Correct a few Win32 errno returns in the VSS code so that hopefully
192 a resonable Win32 error message will be printed.
193 kes Convert a few strcat()... to bstrncat() in the Win32 code.
195 rbn Added Windows version of bsmtp.
196 rbn Fixed path search for Windows so that Bacula\bin is automatically
197 searched for programs and scripts.
198 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
201 Version 1.39.24 released:
203 kes Apply dvd find volume patch from Richard Mortimer.
204 kes Eliminate the dvd specific mount routines using only the
206 kes Make update_free_space a method of DEVICE and rename
209 kes Require a messages command acl to be able to receive messages
211 kes Add console, system, and scan job types in util.c.
213 kes Print the Volume purged message only for real jobs to keep
214 from cluttering up the daemon messages.
215 kes Lock the tape drive door while Bacula is using the device.
216 kes Add back the 'No Jobs running' message to FD and SD status because
217 my regression script depends on it, and I'm too lazy to change the
219 kes Start using structure assignments (not too happy about it ...).
220 kes Fix a bug in the tools Makefile that broke on Solaris.
221 kes Unload any autochanger drive during a 'release' command.
223 kes Enhance error message when restoring without bootstrap file.
224 kes Check restored size only for regular files.
225 kes Store Python job level in job record in Dir.
226 kes Add back code to open tape device nonblocking, but if rewind fails
227 release file descriptor.
228 kes Modify acquire.c to first try autoloading the device. Also, ask operator
229 to mount tape if drive cannot be opened.
230 rbn Made Windows service tray status windows resizable.
231 rbn Fixed horizontal scrolling of text in status window.
232 rbn Preserve horizontal and vertical scroll position while
233 updating. This prevents the display being reset to the
234 top line every 5 seconds.
235 rbn Fix Windows cross-compile compatibilty problems with
236 *nix variants such as OS X without the zic command.
237 rbn Eliminate dependency on man2html.
239 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
241 kes Fix a compiler warning in compat.cpp
242 kes Change strcpy to bstrncpy in compat.cpp
243 kes Remove some broken code in bdb_list.c
244 kes Fix, hopefully the last, ACL problem in the restore command.
245 kes Update the README.mingw32
246 kes Add new version of upgrade-win32-client.txt to examples directory.
247 Submitted by Michel Meyers.
248 kes Print an INFO message in the job report when a Volume is marked Purged.
249 rbn Fixed handling of external program and script execution
250 so that the format of the command line is more flexible.
251 Now executable path names containing spaces are translated
252 to the equivalent short name automatically. The result is
253 passed to cmd.exe with the quotes removed.
255 kes Apply the recycle patch from Richard Mortimer.
256 kes Convert a few if statements in dev.c to switch statements.
257 kes Start using print_errmsg instead of bstrerror().
258 kes Print a job message in SD when a job is marked to be canceled.
260 kes All code added back. Fixed block.c read/write to loop only 3
261 times. This apparently keeps the OS from crashing (at least
263 kes The kernel bug still persists. Backup something then immediately
264 do a bscan on the same tape, and the kernel will crash.
265 kes Simplifed tape open(). It no longer uses nonblocking mode, which
266 means that opening with no tape loaded will probably take at least
267 6 minutes before an error is reported.
268 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
269 when doing set_os_device_parameters.
270 kes Report open error in mount.c
271 kes Remove all .exe files from the installer directory on make clean.
273 kes Start adding back removed code.
274 kes Back out a number of changes because backups to tape crash my
276 kes Remove the inetd code from the File daemon.
278 kes Add -c option to pg_dump so that it initializes tables when
280 kes Fix FirstWritten time on Volume to be obtained from SD so that
281 it is the actual time the volume was first written.
282 kes Minor Makefile changes.
283 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
284 ebl Add yes keyword to prune/purge command
286 kes Correct a test in block.c that prevented restore of a DVD from
287 looking at the last part in the spool directory.
288 kes Make some error messages clearer mostly by using the word DVD
289 in the message. Improve infor message in read_record for DVDs.
290 kes Remove DVD kludges in dircmd.c label/relabel.
291 kes Move the dvd relabel code from dircmd.c into
292 write_new_volume_label_to_dvd() adding a relabel argument.
293 kes Rewrite the truncate_dvd() code to be much simpler and
294 more logical. First blow away any spool part, then create a
295 new empty part and write to the DVD.
296 kes Rewrite the can_write_on_non_blank_dvd() code making it
297 only ensure that no valid data is on the DVD -- i.e. it
300 kes Minor Makefile fixes.
301 kes Put attach_dcr_to_dev in a subroutine.
302 kes Make attaching/detaching to/from a device use a flag and
303 only detach if actually attached.
304 kes Add dvd-simulator.in to scripts directory and add to configure.
305 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
306 This could be a cause of a number of drive reservation problems.
307 Note, this code is now in attach_dcr_to_dev().
308 kes Suppress doing Volume updates if it is a system job. This should
309 prevent the DVD label blocking.
310 kes Clear the freespace ok flag in a couple of strategic places.
312 kes Put removing zero sized spool part file in subroutine and
313 call from release_device().
314 kes Add Richard's patch for relabel to dircmd.c, but save and restore
316 kes Rework a lot of subroutines in dev.c to take dcr as an
317 argument. This is done to eliminate the usage of attached_dcrs
319 kes Change truncated_dvd to blank_dvd, which seems more suitable.
320 kes Apply most of Richard Mortimer's truncate patch.
321 kes Create lseek() method for DEVICE that takes dcr as an
322 argument. This is to eliminate the use of attached_dcrs in
323 lseek(). The calls to lseek_dev() must still be changed.
325 kes Apply Richard Mortimer's patches for printing an error
326 message in btape when a DVD is used, and to initialize traceback.
327 kes Added error message to btape when trying to access a file.
328 kes Move prototype of update_slots() to protos.h.
330 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
331 and FDJobStatus to the Director Python variables.
332 kes Make sure valid argument passed to str_to_utime() where Arno
334 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
335 I.e. part of two different patches.
337 kes Modify disk changer to simulate some of the error conditions
339 kes Make sure the close() call in the SD tools is just before the
341 kes Implement dir_get_volume_info() in bls using the patch from
342 Richard Mortimer but call find_num_dvd_parts().
343 kes Implement find_num_dvd_parts() that mounts and scans a DVD
344 and counts the parts.
345 kes Move the omode code in open_dvd() up so that the cannot
346 write on blank disk can check can be bypassed for read mode.
349 kes Disable normal data spooling for DVD writing which uses
350 a different spooling mechanism.
351 kes Apply patch from Richard Mortimer to ensure that the number
352 of DVD parts is correctly updated.
353 rbn Save installer details log in the Bacula directory as
355 rbn Add installer generation of client and storage templates
356 suitable for @inclusion on the director.
357 rbn Mark previously installed Win32 components read-only since
358 deselection doesn't do anything.
360 Version 1.39.22 beta released:
362 kes Fix logic error in handling error return from mtx-changer
364 kes Make status from SD aware of -1 (unknown) Slot status.
365 kes At Eric's suggestion make both the 'slots' and 'drive' commands
366 to the Storage daemon work even if the drive is busy.
367 kes Make two separate Win32 menu links for starting bconsole and
368 wx-console in winbacula.nsi
369 kes Apply DVD part_spooled patch from Richard Mortimer
370 richm@oldelvet.org.uk
371 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
372 rbn Fixed problems migrating settings from previous releases in
373 Win32 installer. Add Readme.txt with an option to show it on
374 the installer Finish page.
376 kes Use get_catalog_resource() to open catalog database
377 to ensure that ACLs are respected and that user is
378 correctly prompted for database.
379 kes Integrate multiple console/director patch from
380 Carsten Paeth calle@calle.in-berlin.de
381 ebl Add character substitution in Job/JobDefs WriteBootStrap.
382 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
383 kes Apply patch supplied in bug #656 to pass priority field
384 in the run dialog to the Director in gnome console
385 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
386 this will fix bug #627 where Bacula eventually gets
387 confused about what Volume it wants.
388 kes Add a new close_part() class in the SD to save the device
389 state around open/close_part/open for DVD writing. This
390 should fix the num_dvd_parts getting zeroed as reported by
392 kes Apply patch from Richard Mortimer that correct edit code
393 for debug output of st_size.
394 ebl Add support of encrypted data stream to bscan.
395 display data_len instead of data content (may be binary)
397 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
398 bcopy. Fixes bug #669 reported by Eric.
399 kes Fix incorrect number of arguments in SQL statement in
400 sql_get.c as reported by Eric.
402 kes Update examples directory.
403 kes Remove unused variable in winservice.cpp
404 kes Make Win32 make command build installer.
405 rbn Add new Install Type page, used to select between Automatic
406 and Custom installs. Automatic installs only prompt for
407 configuration items that can't be reasonably defaulted.
408 rbn Added Bacula logo to page headers.
409 rbn Added Upgrade support
410 - Configuration and component selection are migrated from
412 - Configuration of upgraded components is preserved and
414 - Configuration of new components is handled according to
415 the Automatic / Custom selection.
416 - Component selection is defaulted to previously selected
418 rbn Installation of Server components is disabled on
419 Windows 95, 98 and ME.
420 rbn Added URLs for support, info and upgrades to Bacula entry
421 in Add/Remove Programs.
422 rbn Added Version info to Bacula entry in Add/Remove Programs.
424 kes Correct dvd code that breaks tape labeling.
425 kes Implement Enabled on update slots.
427 kes When doing a label, pass the VolBytes back to the Director,
428 which puts it in the catalog.
429 kes Print an error message if the user attempts to prune an
431 kes Need to start using %ld when sscanfing 32 bit values.
433 kes Correct the counting of VolCatBytes for DVDs.
434 kes Add code to mount.c to require that VolCatBytes corresponds to
435 what is actually found when doing an append.
436 kes Update freespace only after writing on the DVD.
437 kes Remove code that blows away the current part in the spool file.
439 kes Apply new dvd-handler patch from Richard Mortimer.
440 kes Tweak so that debug level 20 shows only DVD commands.
441 kes Correct spooled_part flag in dev.c close() so that it is cleared
442 when the spool file is deleted or does not exist.
443 kes Print part number in read_records when eof hit (restore).
444 rbn Installer default changed to start services on new install.
446 kes Make find with no args in tree restore return error rather than
447 stopping the selection. Fixes bug #665
448 kes Rework DVD writing to ensure that the last part is written
449 on open_next_part when dealing with a spool file.
450 kes Correct the lseek_dev() routine to handle end point correctly
451 (bug introduced by me).
452 kes Allow part number to exceed num_dvd_parts in lseek_dev().
453 rbn Change make_session_key on Windows to use WIN32 APIs to produce
455 rbn Add new tool scsilist.exe which displays the changer, tape and
456 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
457 to add them to bacula-sd.conf.
459 kes Apply dvd-handler patch from Richard Mortimer.
460 kes Apply dvd error check patch from Richard Mortimer.
461 kes Apply bpipe race patch from Richard Mortimer.
462 kes Rework how DVD labels are handled and set append only
463 when part > num_dvd_parts.
465 kes Rework many features of DVD writing and reading. Added many error
466 messages. Most importantly changed part to represent the current
467 part number base zero. This makes current DVD writing incompatible
468 with previous version.
470 kes Add host:port to connect failure messages to FD and SD from Dir.
471 kes Add WhereACL to console ACL list. If nothing is specified, only
472 the default is permitted for restore. Otherwise, *all* allows any
473 path, or you can specify permitted paths. This should allow control
474 over where users can restore files. This is untested.
475 kes Modified message to add a ? (as in loaded?) when querying the autochanger
476 for what Slot is loaded.
477 kes Fixed the use of Slot, so that is more correctly maintained, thus
478 eliminating unneeded duplicate calls to determine what Slot is loaded.
480 kes Install man pages with 'make install'
481 kes wx-console crashes because of differences between Bacula and wxWidgets
482 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
484 kes correct improper indenting in wx-console/console_conf.c
485 kes update wx-console header copyrights
486 kes Fix bug #658 where wx-console mangles file/directory names containing
489 kes Add Media.Enabled flag to client backups for dotcmds.c
490 kes Enforce Media.Enabled=1 for a current restore to work.
491 kes Require restore case 3 to have sqlquery permission to work.
492 kes Remove obsolete del_MAC sql command.
493 kes Ensure that bscan creates Volumes with Enabled=1.
495 Version 1.39.20 beta released:
497 kes Correct missing Client table reference in SQL pointed out by
500 kes Fix Win32 build (new entrypoint, start baculafd).
502 kes Add -n option to bconsole to turn off conio.
503 kes Print JobIds to be migrated in Job Report.
504 kes Add additional user supplied notes to the messages part of
505 bacula-dir.conf concerning multiple email addresses.
506 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
507 kes Add more recent Feature requests to Projects file.
509 kes Apply Maritn's fix to src/win32/Makefile.
510 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
511 kes Implement pruning for Migration and migrated jobs.
512 kes Implement PoolOccupancy migration.
513 kes Implement PoolTime migration.
515 kes If doing a mount, look for a slot, and if specified pass it to
516 the SD so that it can load the autochanger.
517 kes Return DVD=1 flag if a label command is done to a DVD. This
518 permits setting VolParts to 1.
519 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
520 rework ua_label code based on DVD media type to use DVD flag returned.
522 kes Eliminate some compile warnings in dird_conf.c
523 kes Format the bytes field in the terminated jobs part of the status
524 command for the three daemons with suffixes to reduce print size
525 of backup bytes. Suggested by a user.
526 kes When not descending into a directory, print the File= name that
527 triggered it -- makes why not descending a bit clearer.
528 kes Do not unload autochanger when doing a list command -- basic code
529 from Eric Bollengier.
531 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
532 to build-depkgs-mingw32. It now handles two options -h to display
533 help and -C to reextract the source and apply the patches. The -C
534 option is useful for updating the source after new patches are
536 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
537 This allows updating to new versions without having to modify the
538 script and makes it easier to figure out which packages and which
540 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
541 as build-depkgs-mingw32 except they are built using Microsoft Visual C
542 and placed in the depkgs-msvc directory. There is also an
543 External-msvc file to describe the packages.
545 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
547 kes Fix bug #462 incorrect error message printed when client script called
548 from File= was not found.
549 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
550 do a rewind on Solaris when no tape is in the drive (Solaris does not
551 have the detailed errno found on Linux). Added Solaris specific code.
552 Note, this may apply to other OSes as well.
554 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
555 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
556 fix bug 648 - update sqlite script patches, lock out gnome2console
557 builds for platforms with gtk+ < 2.4.
558 Updated build_rpm.sh - add remote source directory, add switch for
559 signing, refine file names.
560 Updated spec file again for Mandriva build as they have this curious
561 custom of silently converting all manpages to bzip2 format just before
562 the final packaging step.
564 rbn Fixed the Windows Makefiles so that they won't accidentally try and
565 pickup binaries for the Unix build. This allows both the Unix
566 build and the Windows build to be built in the same tree without
567 interfering with each other.
568 rbn Fixed error handling and cleaned up mtx-changer.cmd.
569 rbn Added the rest of the database scripts. These are installed but are
570 not yet edited for variable replacement.
571 rbn Broke out the cats functionality from bacula.dll and put into new
572 separate dlls for each database type. At installation time the
573 correct one is copied to bacula_cats.dll.
574 rbn Eliminate the need to install the mysql.dll on client only builds.
575 rbn Moved dird/sql_cmds.c into the cats directory so all the database
576 specific #ifdefs were in the cats directory.
577 rbn Added a new sql_cmds.h with all the declarations for the variables
578 exported from sql_cmds.c.
579 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
580 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
582 kes Correct improperly formatted list command output reported by Dan.
584 kes Correct despool time calculation.
586 kes Remove previous changes to compat.cpp as they create problems.
587 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
588 kes Attempt to fix problems with the msg_queue crashing on Solaris
589 when Bacula is terminating, but problems remain.
590 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
591 name editing problems with too many \\?\es.
592 kes Fix some Bacula source code style problems in compat.cpp.
593 kes Add debug code to compat.cpp and convert non-Bacula debug code
596 kes Change the name of the technical notes file from kes-1.39 to
597 technotes-1.39. Prefix my messages with 'kes '.
598 kes Allow dequeue_messages() to be called twice. Should fix bug
600 kes Add Job type to bscan Job information output.
602 kes Update copyright date in program files, and for the most part
604 kes Implement %q in bsnprintf.c apparently I forgot it.
606 kes Make disk-changer sed command compatible with FreeBSD.
607 kes Make a first cut at a ReleaseNotes and ChangeLog for a
609 kes Make make clean descend into the src/win32 directory.
610 kes Fix some #ifdefing so that Solaris and FreeBSD compile
611 sys/stat.h was turned off.
612 kes Use suffix editing for new transfer rate messages.
613 kes Attempt to come up with a workaround which seems to be an OS
614 bug where write() returns EBUSY. IMO this should not happen.
615 It triggered in truncatebug test. The workaround retries using
617 kes Eliminate a strerror() call in a class method that failed with
619 kes Use rm -rf rather than rmdir to delete the src/win32/release
620 directory during make clean.
622 kes Make bscan ignore ACL streams.
623 kes Update projects files with new Feature Requests.
624 kes Generate current English and French manuals and upload
626 kes Update the home page to include the new British/French flags to
627 switch between translations. Work done by Alexandre Baron.
628 kes Make disk-changer script print an error message if the changer
629 directory is not defined.
630 kes Create a generic DB routine for getting an int (32/64 bit) from
632 kes Add more migration code.
633 kes Add a few more files to .cvsignore here and there.
634 kes Minor fixes for SD write rate and despooling rate.
635 kes Turn off new test code in src/console.c
639 kes Incremented the version number to signify that all of Robert's code
640 for Win32 that was in the branch is now integrated into the HEAD,
641 and that Eric has submitted code that we hope will provide limited
642 backward compatibility with 1.38 file daemons (more testing to be
644 kes I rationalized a few of the names of the variables (mainly jcr names)
645 that are used during migration as keeping three different jcrs at the
646 same time clear in ones head is not easy.
650 eb Tweak new runscript feature to work with 1.38.x FDs.
651 eb Correct crypto.c to fix segfault when restoring an encrypted stream
652 on fd which don't use rsa keys.
653 eb Add yes/no English keywords on localized yes/no questions.
655 kes Several important commits from Robert Nelson for code cleanup and
657 kes Modify console.c so that when conio is enabled, it converts \n to
658 \n\r before outputting to the console. Hopefully this will fix
659 the problems with expect in Perl that Eric saw.
661 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
663 kes Add Comment field to llist of a volume.
664 kes Allow true/false in some yes/no questions.
665 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
666 kes Remove a few /n's when scanning commands from another daemon. This
667 permits adding additional fields later.
668 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
669 kes Update README.mingw
671 kes Tweak authentication to work with 1.38.x FDs.
672 kes Tweak catalog make scripts.
673 kes Fix catalog upgrade scripts so that they work.
674 kes Correct despooling debug code to eliminate race condition.
676 kes Add additional fields as specified by Arno to LocationLog.
677 kes Add comment field to the Media record.
678 kes Add Time field to the Log record.
679 kes Correct migration SQL (thanks to Bill Moran) so that it
680 runs with PostgreSQL also.
681 kes Add spooling/despooling info in status output of SD.
683 kes Spend a lot of time integrating mkcdrec with the rescue disk.
684 kes Add VOLMGMT message class for volume management messages (none yet).
685 kes Add CATALOG as a destination. It goes into the LOG table.
686 kes Implement the Log table in the DB.
687 kes Implement the Location Log table in the DB (for user use).
688 kes At Eric's request add a run_scripts() just after blast_data in
691 kes Add Enabled column to Location, correct some typos in DB schemas.
692 kes Correct bug I introduced into RunScripts enum.
693 kes Add log table to Catalog
694 kes Purge original job migrated if the migration terminates normally.
695 kes Cleanup purging of files/jobs so that it is done only in a
697 kes Add new VOLMGMT message class.
698 kes Add Catalog message destination (user conf code remains to be written).
700 kes Modify read_record and friends to properly deal with migration
702 kes Update debug code in read_record.
704 ======================= Warning ==========================
705 Separate read and write storage in Jobs in the Director. This
706 is a major rewrite of some of the low level code and hence has
707 a high probability of introducing bugs.
708 ==========================================================
710 kes Move the job init code up to *before* the job is put into
711 the job queue (resource allocation queue). This permits the
712 job to establish whether it will read or write or do both.
713 kes Add name() methods to all the resource classes.
714 kes Implement separate read and write storage resource
715 allocation/deallocation in jobq.c
717 ======================= Warning ==========================
718 Implemented new method of getting the default Storage from the Media
719 record rather than from the MediaType for restore. As a fall
720 back, if no Storage is defined, use the MediaType. This
721 eliminates most all prompts if there are multiple MediaTypes
722 used. This is an important and fundamental change.
723 ==========================================================
725 kes Add more detail (Storage, Device) to list of volumes printed
727 kes More code in migrate. In particular start multiple jobs if
729 kes Probably overkill, but ensure that the bsr is unique even within a
731 kes Rework bsys.c drop() so that it now should work as expected.
732 kes Update a bunch of old copyrights -kes particularly in .h files.
733 kes Remove src/lib/bshm.c/h
737 ======================= Warning ==========================
738 All hash codes in the database are now kept in world
739 compatible base64 format (no = filling). This means that
740 all FileSets will be updated and if you are running
741 verify jobs, you must do an InitCatalog.
742 Authentication uses the new algorithm, but should be
743 backward compatible with 1.38.x
744 ===========================================================
746 kes Modify the authentication routines so that the 1.39.15 Director
747 always runs with the compatible binary to base64 code (same as
748 the rest of the world). It will however detect if an SD or
749 FD is running the old code and if that is the case, will use
750 the old algorithm for authentication. However, all consoles must
751 use the compatible algorithm, and all data entered into the database
752 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
753 use the compatible algorithm.
754 kes Rename the cram_md5 routine names to be slightly more appropriate
755 to what they are doing (challenge and respond).
756 kes Robert committed his #ifdef and header cleanup.
758 kes Fix a compiler warning in files/backup.c
759 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
761 kes Robert committed his low impact changes.
762 kes I removed a size_t from the jcr.h definition.
763 kes Update the tape regression scripts (still to be tested).
764 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
765 kes Require done or quit to exit from in memory tree restore.
767 kes Write install/uninstall of new manpages. There are now a
768 pile of man pages. Some of which need a lot of work.
770 ======================= Warning ==========================
771 The --mandir ./configure option now points to the top level
772 man directory. The man files will be installed under
773 mandir/man8 and mandir/man1 as appropriate.
774 ==========================================================
776 kes Add complete text of GPL to LICENSE.
777 kes Implement job report that indicates where Storage and Pool
778 came from -kes with overrides and Pool storage and NextPool,
779 it is all very complicated.
780 kes Create a few common subroutines for backup.c and migrate.c
781 kes Eliminate warning messages from tray-monitor.c
783 kes Apply fix for scheduler for missing unlock_jobs().
784 kes Clean out autoconf caches before rebuilding configure
785 kes Fix the FreeBSD pthreads lib define updated by Dan.
786 kes Add missing semicolon in src/console/console.c
787 kes Add Robert's enhanced version of build-win32-cross-tools
788 as well as his patch file.
789 kes Note, the new gcc options are likely to break building of
790 wx-console or the tray-monitor ...
792 kes Implement Robert's suggestion to suppress printing compile lines.
793 kes Detect GCC correctly (I hope)
794 kes If using GCC (actually g++) add the following compiler flags
795 -fno-strict-aliasing -fno-exceptions -fno-rtti
797 ===================== Warning =============================
798 Turn on new bsnprintf() code. This could cause print output
800 ===========================================================
802 kes Fix crypto when not using openssl. I previously overlooked this.
803 kes Eliminate crypto type punning problems by eliminating void * and
804 using uint8_t * instead.
805 kes Harden authentication failure in FD by single threading errors
806 and forcing a 6 second wait.
808 ===================== Warning =============================
809 Removed 'Accept Any Volume' directive.
810 ===========================================================
812 kes Major cleanup and simplification of regress using shell functions
813 (more tests to be converted to new format)
814 kes Add detection of 64 bit Irix as indicated by user.
815 kes Increment catalog database id from 9 to 10.
816 kes Add a few of the new database fields to the various C++
818 kes Implement code to fill in the most important new fields (e.g.
820 kes Ensure that most of the new fields are in create/get/insert/update.
821 More work to be done.
823 kes Update some very old licenses in src/cats.
824 kes Modify the database format for handling Migration jobs:
825 Add PriorJobId, RealEndTime to Job table
827 Remove Stripe from JobMedia record (not used, wasting space)
828 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
829 Add Cost to Location table.
830 kes Delete mac_record subroutines.
831 kes Add new table values to create/update/get routines as appropriate.
832 kes Update the update_tables and make_tables scripts.
833 kes Make a first cut in using a union where multiple pointers (actually
834 pointers to pointers) are stored.
835 kes Make some changes to base64.c suggested by Robert and others and add
836 a small amount of documentation.
837 kes Add some changes suggested by Peter for Solaris (bregex...)
838 kes Make runscript.h always built because it needs to be pulled into
839 more places. In particular its RES was left out of a union.
840 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
841 This makes it slightly easier to detect uninitialized variables.
843 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
844 sometimes creates install problems.
845 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
846 Nelson's code. More to do.
847 kes Convert a few store_bit to store_bool in filed_conf.c.
848 kes DVD tweak to block.c as supplied by Uwe Muessel.
850 kes Modify configure.in to check for typeof().
851 kes In findlib/attribs.c use typeof instead of templates if possible.
853 kes Implement partial error messages for src/filed/acl.c
854 kes Fix return code to fail when doing update barcodes and
855 Pool resource is not found. This previously caused Volumes
856 to be labeled as cleaning tapes.
857 kes Small updates to projects.
859 kes Add Eric Bollengier patch for new RunScript directive. It breaks
860 compatibility between dird and fd.
862 kes Prevent DVD code from rewriting label if the device cannot be
864 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
865 fix Debian build bug.
866 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
867 kes Integrate manpages contributed by Jose Luis.
868 kes Update projects file.
869 kes Add manpages Makefile.in to configure.in
870 kes Remove installation of bacula.8 in scripts directory.
872 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
874 O_NOATIME is a open() flag which makes it possible to read a file without
875 updating the inode atime (and also without the inode ctime update which
876 happens if you try to set the atime back to its previous value). It also
877 prevents a race condition when two programs are reading the same file, but
878 only one does not want to change the atime. It's most useful for backup
879 programs and file integrity checkers (and bacula can fit on both
882 Recent versions of the Linux kernel and glibc have support for it (the
883 glibc support being mostly copying the O_NOATIME definition to
884 bits/fcntl.h). If there's no support for it on the kernel, trying to use
885 it does nothing (since the kernel ignores unknown flags).
887 If the kernel has support for it, trying to use it either works, fails
888 silently (mostly in remote filesystems), or returns errno=EPERM (if you
889 are not either the owner of the file or root). A simple way to prevent the
890 failure is to open the file without the flag and set it later with
891 fcntl(F_SETFL), ignoring any EPERM errors.
892 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
893 of restarted jobs to complete (due to a destroyed pthreads conditional
894 variable used by the message thread).
895 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
897 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
898 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
899 colons in query.sql file.
900 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
901 not to create orphans.
902 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
903 in restore long listing.
904 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
905 of incorrect MarkedId.
906 kes Apply patch from adioso bug #616 to correct text in manual (replace
907 Director with File daemon).
908 kes Rework a few of the zlib changes so that they build properly.
911 kes Move DIR 'run' command to SD before starting the message thread
912 as suggested by Cristopher Hull to avoid a race deadlock from
913 two threads using the bsock structure.
914 kes Modify LICENSE to correct some problems pointed out by Debian.
916 kes Correct EOF with no \n lex.c problem.
917 kes Tweak compat.h compat.cpp and merge with apcupsd
918 kes Add additional INFO messages if autochanger cannot be used.
921 kes Simplify Win32 Makefile
922 kes Correct count of buffers/bytes used by smartall.c
923 kes Updated compat.h after porting apcupsd to MinGW.
925 kes Work on getting wx-console building on MinGW. wxWidgets now builds
926 started adding Makefile ...
927 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
929 kes Reloading a bad configuration file doesn't kill director any more.
930 Thanks to fix from Eric Bollengier.
932 kes Fix problem of accents with new Win32 code.
933 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
934 works in the MinGW build with the exception that there
935 is a problem with accented characters -kes i.e. there is
936 some mapping problem with wide characters.
937 kes The code no longer compiles with Microsoft VC++.
939 kes Start implementing Christopher's St.Bernard code.
940 kes Add Christopher's mods for opening files.
941 kes Strip \r \n from Win32 error messages (Christopher)
942 kes Add more info about Win32 system if unknown (Christopher)
943 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
944 kes Fix a number of incorrect strings marked for translation, when
945 they should not be (e.g. commands).
946 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
947 Patches supplied by user in bugs #608 and #599.
948 kes Use most recent of st_ctime and st_mtime in restore tree DIR
949 listing. This fixes some problems with Win32 printing incorrect
951 kes Correct the clock shift comm time calculation between the DIR
952 and the FD. It was added rather than subtracted.
953 kes Strip all backslashes in filenames to be restored on Win32
954 machines -kes the names should all be in Unix format, and if
955 there are any backslashes it is most likely due to an improper
956 FileSet definition, and the files will not otherwise be
958 kes Remove lib/regex.c (replaced by bregex.c).
959 kes Delete src/win32/License.txt
960 kes Modify installer to install LICENSE
962 kes Fix bug in build-win32-cross-tools script reported by Howard
963 kes Implement cross compiled bconsole
965 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
966 kes Write first cut of README.mingw32
967 kes Add back ua_label barcode fix from Rufolf Cejka.
968 kes Integrate the majority of the Mingw cross-tools submission
969 made by Howard Thomson. Everything compiles, with zlib, openssl,
970 and VSS turned off. Linking needs a pthreads library ...
972 kes Add 'Dir Status' button to the gnome console.
973 kes More work on migration.
974 kes Restore non-compatible base64 coding to permit compatibility.
975 kes Display heap stats in Storage daemon without debug level.
977 kes Integrate most of the MinGW changes -kes more to do.
979 kes Implement using pg_config for finding PostgreSQL files.
980 Fixes bug #600. Patch supplied by user.
981 kes Remove -t option from mktemp in mtx_changer.in and use
982 working directory. Fixes bug #578.
983 kes Update job start time after the any run before job so that
984 files created by the script are only backed up once. Fixes
986 kes Strip trailing newline only from filenames entered in
987 the restore command when reading a file. This permits
988 the user to enter filenames with trailing spaces. Fixes
989 bug #549. The user supplied a patch that I modified slightly.
990 kes Use the most recent time (st_mtime, st_ctime) in the dir
991 command in restore. This gives the user a better idea of what
992 the newest file really is. This fixes bug #574. The fix
993 was suggested by the user.
994 kes Implement a compatible version of base64. This permits external
995 programs to duplicate Bacula's base64 algorithm using standard
996 routines. This fixes bugs #296, and 565. Patch submitted by
998 ================= Note ========================
999 Previous Signatures stored in the database are no longer
1000 compatible with this. The main downside is for Verify jobs,
1001 and doing an InitCatalog run will fix the problem. Also, the
1002 authentication between the deamons is changed, so all daemons
1003 must be simultaneously upgraded.
1004 ==============================================
1005 If you don't like this fix, set:
1006 const bool compatible = true;
1008 const bool compatible = false;
1011 kes Ensure that DB signature is never NULL.
1012 kes Ensure that DB table names are not translated.
1013 kes Fix scheduler to handle time skew (eg daylight savings).
1014 kes Fix scheduler to use lock_jobs() to avoid most problems
1015 with reload. Window is now milliseconds.
1017 kes Apply patch from Christopher Hull
1018 kes Allow multiple connections to database with different
1020 kes Invalidate the scheduler when doing a reload. Fixes seg
1021 fault, but still 60 second window.
1022 kes Additional info in Reschedule message.
1023 kes Use set_jcr_job_status() everywhere to prevent loss of
1025 kes Display peer IP in FD if error from connecting DIR.
1026 kes Don't increment file count for DIRBEGIN.
1027 kes Replace illegal characters in Win32 filename by _.
1028 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1029 kes Hash hard link filenames rather than linked list.
1030 kes Fix for security failure in chdir on Win32.
1031 kes Add CreateDirectoryA/W win32 API entry points.
1032 kes Add /silent option to Win32 FD for Install/Remove service.
1033 kes Always print Heap statistics in FD.
1035 kes Remove the -f option from the chown in Makefile.in for more
1037 kes Change setting the group in Makefile.in to use chgrp for
1039 kes Implement a write_store and read_store to replace
1040 dirstore in reserve.c
1041 kes Implement a Bacula read/write lock for Python rather
1042 than using the Python lock to avoid recursive problems.
1043 kes Correct the uninstall directory names in filed/Makefile.in
1044 as reported by a user.
1046 kes Correct some problems with database creation (new tables).
1047 kes Replace a bunch of old 0x%x by %p.
1048 kes Get first cut of Migration with Job selection working.
1050 kes Change store_bit() to store_bool() for the Spooling in
1051 dird_conf.c -kes bug reported by Robert Nelson.
1053 kes Correct Makefile bug found by Dan Langille.
1055 kes Correct Makefile for Solaris /bin/sh
1056 kes Correct mtx-changer.in for Solaris /bin/sh
1057 kes Abort if a conf resource does not have a Name =
1059 kes Change the name of the regex program to bregex.
1060 kes Add the bwild program to the tools directory. It is similar
1061 to the bregex program.
1062 kes Implement create bregex.h and bregex.c in src/lib from the
1063 Python regexp program.
1064 kes Use the new bregex.c to implement Regex expressions on Win32.
1066 kes More work on migration.
1067 kes Implement wild program in tools directory for testing
1068 wild-cards. Almost identical to the regex program.
1069 kes Up port VSS single thread locking code.
1070 kes Replace N_(..) by NT_(...) to inhibit translation of
1072 kes Modify Makefile to change the permissions on Working Directory
1073 to 770 if the directory is created.
1074 kes Do not fail the Makefile if changing the permissions or
1075 owner/group on WorkingDir fails.
1076 kes Remove early selection of Scratch Volumes in the recycling
1078 kes Correct the old recycling algorithm so that Scratch Volumes
1079 are selected when looking for a Volume in the changer.
1080 kes Correct a typo in the Verify SQL reported by Joe Park.
1082 kes Remove automatic case folding on Windows FDs. You must
1083 explictly use the 'Ignore Case = yes' option.
1084 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1085 scratch volume in an Autochanger early in the 'recycling'
1088 kes Make weof() and clrerror() methods of class DEVICE.
1090 kes Tweak license to include Microsoft restrictions.
1091 kes Move mysql.reconnect to after real_connect(). Thanks to
1092 Frank Sweetser for the patch.
1093 kes Disallow a backslash in a File = directive (Windows junk)
1094 unless the string is quoted.
1095 kes Apply Eric's patch to ua_label.c so that daemon protocol
1097 kes Add NT_ definition for strings that should not be translated.
1098 kes Apply NT_() to ua_label.c
1099 kes Remove timed wait for VSS on Win2K3 as it is not yet
1101 kes Correct bacula.in script to reference bacula-ctl-xx in the
1102 sysconfig directory rather than the bin directory.
1104 kes Fix a long standing bug in the bacula start/stop scripts.
1105 kes Attempt to add the new bacula-ctl-* files to the rpm.
1106 kes Switch to using typeof() for list traversing to avoid
1107 as many FC5 g++ compiler warnings as possible.
1109 kes Split the bacula start/start script into four files:
1110 bacula -kes starts and stops calling other scripts
1111 bacula-ctl-dir -kes starts/stops the director
1112 bacula-ctl-fd -kes starts/stops the File daemon
1113 bacula-ctl-sd -kes starts/stops the Storage daemon
1115 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1116 kes Correct editing of JobId from int to int64 in fd_cmds.c
1117 kes Eliminate FileSet name race with bash_spaces() and multiple
1118 threads by bashing in a local.
1119 kes Fix error return from 'use storage' to print a correct error
1120 message rather than nothing.
1121 kes Correct false re-read last block error message when two jobs
1122 are simultaneously writing at the end of a tape.
1123 kes Simplify exit conditions in the reserve.c code to avoid
1124 possible non-release of reservation_lock().
1125 kes Suffle lock order in reserve to avoid deadlock between
1126 reservation lock and device mutex.
1128 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1129 tracking this down for me !!!! as it broke the Win32 build.
1131 kes Integrate addition of line count limitation to bsmtp -l from
1132 Sebastian Stark <stark at tuebingen.mpg.de>
1134 kes Implement regex test program in tools directory.
1135 kes Attempt to fix time problem with bsmtp with foreign langs.
1136 kes Add strip_trailing_newline() submitted by user.
1137 kes Implement regex matching in migrate.c
1139 kes Fix bug #537 to allow arbitrary time to mount a volume for
1140 restore, if polling is turned on.
1141 kes If dir_user or dir-group is specified in ./configure apply it to
1142 the working-dir. Fixes bug #533.
1143 kes If rescheduling a job cancel the previous incarnation with the SD.
1144 Fixes bugs #566 and 557.
1145 kes Fix bug #567 do_message() definition type conflict.
1148 kes Add more jcr methods and make mutex and use_count private.
1149 kes Create lock/unlock methods for jcr.
1150 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1151 records to get to seek position.
1152 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1153 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1154 terminates correctly by doing pthread_kill(). Do not destroy
1155 SD cond wait variable between executions of the job. Use local
1156 mutex for cond variable to avoid blocking jcr chain. Fix poor
1157 use of jcr use count in jobq.c for restarted jobs.
1158 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1159 lib/jcr.c -kes prevents locking the jcr chaing.
1160 kes Apply patch from bug #564, which corrects listing volumes with
1161 multiple autochangers. Apply same fix to next volume list.
1162 kes Fix bug #562 where restore bootstrap file is not unique.
1163 kes More details in implementing David's migration syntax proposal.
1164 kes Save and restore dcr when swapping drives so that if we have
1165 a write dcr it is not lost.
1166 kes Use new routine lock_reservations() to lock the reservations
1167 system, and call it while looking for a volume in askdir.c.
1168 This could possibly fix bug #543.
1169 kes Stop SD command loop if job is canceled.
1172 kes Remove old code from findlib/create_file.c
1173 kes Rename mac.c migrate.c
1174 kes Add user friendly display of VolBytes in job report.
1175 kes Rename target... to previous... to make it a bit easier to
1177 kes Add selection type and selection pattern to Migration (idea
1178 given by David Boyes).
1181 kes The po files should now be current.
1182 kes Fix new sql_use_result() code to properly release the
1183 buffers in all cases.
1184 kes Use the keyword ujobid to mean the unique job id; job or jobname
1185 to mean the Job name given on the Name directive, and jobid to
1186 be the numeric (non-unique) job id.
1187 kes Allow listing by any of the above.
1188 kes Add the user friendly job report code for reporting job elapsed time
1189 and rates with suffexes from John Kodis <kodis at comcast.net>.
1190 kes Add Priority and JobLevel as Python settable items.
1191 kes Use TEMPORARY table creation where the table is created by
1193 kes Add new code submitted by Eric for waiting on specific jobid.
1194 kes Add ACL checking for the dot commands.
1195 kes Fix restore of writable FIFOs.
1196 kes Fix a bug in bpipe where the string was freed too early.
1198 kes Modify the Python class examples to inherit object -kes new way
1199 of defining classes. Patch from Felix Schwarz.
1200 kes Implement jobuid to replace old usage of job in keywords as
1201 suggested by Eric Bollengier.
1202 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1203 wait (wait for all jobs to stop)
1205 wait jobuid=unique id
1207 kes Implement write variables for Python to set Priority (anytime), and
1208 Job Level, only during JobInit event.
1210 kes Fix the block listing bug pointed out by Arno.
1211 kes Update the po files at Eric's request.
1213 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1214 accept time qualifiers.
1215 kes Make catalog respect ACL.
1216 kes Add recycle count to Media record.
1218 Changes to 1.39.6-beta1 24Feb04
1220 kes Add Rudolf Cejka's new rc-chio-changer.
1221 kes Implement pulling Volume from Scratch Pool if the
1222 Volume is in the autochanger.
1223 kes Implement additional command arguments for update Volume.
1227 kes Back port changes to 1.38.5
1228 kes Fix recycle SQL for StorageId.
1229 kes Fix misplaced quote in mtx-changer script.
1231 kes Note. Your database must be updated, or you must create
1232 a new database. I have not yet incremented the database level.
1233 kes Add Location table.
1234 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1236 kes Implement create/get mac record in database for adding extended
1237 Migration data to the job record.
1238 kes Add new MAC table to update/make database scripts.
1239 kes Return Storage name used when getting VolumeNames for a job.
1240 kes Change bsr file keyword Storage to Device, which is more accurate.
1241 kes Ensure that Mac records are pruned/purged.
1242 kes Tweak SD tools to deal with changing media type.
1243 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1244 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1245 that the subroutine can switch devices, and hence dcrs.
1246 kes Modify the multiple MediaType read code to re-use the same
1247 dcr when switching devices. This makes the code much more
1249 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1250 from a table for restore.
1251 kes Add Storage name to VolParams, but it really should be Device.
1253 kes Add disk-changer to scripts directory + configure/Makefile
1254 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1255 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1256 kes Implement new store_bool that stores in a bool.
1257 kes Add true/false to yes/no conf directives.
1258 kes Make first cut at changing appropriate store_yesno to store_bool.
1259 kes Complete implementation of Pool storage devices.
1260 kes Move starting clones to job.c
1261 kes Move create_restore_bootstrap_file() to job.c
1262 kes Make copy_storage() more general to be able to handle
1264 kes Cleanup a lot of migration code for manual running, including
1266 kes Move getting a scratch Volume into a subroutine.
1267 kes Make all places a Volume that is added to a pool to
1269 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1270 kes Fix segfault in restore command when no value specified.
1271 kes Start adding code to handle multiple MediaTypes in restore.
1272 kes Eliminate race condition in getting Volume name for
1273 two drive autochanger.
1274 kes More debug code in autochanger.
1275 kes Add storage keyword to bootstrap file, add parsing.
1276 kes Move slot in bsr file into Volume record as there will be
1277 a different slot for each Volume.
1278 kes Create reserve.h
1280 kes Implement Pool storage overrides.
1282 kes Implement first cut of Migration.
1283 kes Implement mysql_use_result() from patch by Karl Hakimian.
1284 This reduces significantly the memory consumption during
1285 the restore tree building, and hence runs faster too.
1286 kes Implement StorageId patch supplied by user (reggie) in bug
1287 #536. This should permit Bacula to work correctly with two
1289 kes Implement Job listing variations suggested by a user.
1290 kes Move updating bootstrap code in backup.c to subroutine
1291 update_bootstrap_file().
1292 kes Add new job status elapsed time and bytes written user
1293 friendly job report output patch sent by John Kodis
1294 <kodis at comcast.ne>.
1295 kes Implement a storage list in Pools.
1296 kes Separate out setup_job() code from run_job().
1297 kes Get migration working -kes lots of changes in mac.c in both
1299 kes Apply patch from user (Eric Bollengier I think) that fixes a
1300 DIR crash when no arguments are supplied to a dot command.
1301 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1302 kes Fix command arg name->volume in label command of gnome-console.
1303 kes Fix SD acquire.c to release correct DCR by explicitly testing
1304 on the dcr address rather than trying to devine if it is a read
1305 or write dcr. This failed in error conditions when the device was
1309 kes Apply user supplied patch for more readable rate output
1311 kes Continue implementing migration.
1312 kes Implement support for removable filesystems in SD.
1313 kes Ensure that btraceback scripts can be read by anyone.
1314 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1315 kes Correct bug where canceling restore before the FD contacts
1316 the SD causes the drive to be left in read mode.
1317 kes Move ofline_or_rewind into DEVICE::close().
1318 kes Eliminate close_device.
1319 kes Convert several dev subroutines to methods (e.g. bsf,
1321 kes Eliminate force_close_device().
1322 kes Implement Device Type directive in Device resource that
1323 can have values File, Tape, Fifo, DVD, or Prog.
1324 kes Add has_cap() method to Device.
1327 kes Add patch from bug #527 to allow RedHat user to specify
1328 options/user/group for starting each daemon in
1329 /etc/sysconf/bacula.
1331 kes Add two new queries to query.sql provided by Arno. One
1332 list volumes known to the Storage device, and the other
1333 lists volumes possibly needing replacement (error, ...).
1335 kes Add periodic (every 24 hours) garbage collection of memory
1336 pool by releasing free buffers.
1338 kes Correct bug counting sized (for display only) in smartall.c
1339 kes Print FD mempool stats if debug > 0 rather than 5.
1341 kes Make db_lock() mutex error fail the job rather than abort
1342 Bacula. Canceling the job caused the mutex to fail.
1343 kes Correct bug in alist.c that re-allocated the list if the
1344 number of items goes to zero.
1345 kes Move the reservation system thread locking to the top level
1346 so that one job at a time tries all possible drives before
1348 kes Implement a reservation 'fail' message queue that is built
1349 and destroyed on each pass through the reservation system.
1350 These messages are displayed in a 'Jobs waiting to reserve
1351 a drive' list during a 'status storage='. Note, multiple
1352 messages will generally print for each JobId because they
1353 represent the different problems with either the same drive
1354 or different drives. If this output proves too confusing
1355 of voluminous, I will display it only when debug level 1
1356 or greater is enabled in the SD.
1358 kes Add enable/disable job=<job-name>. This command prevents
1359 the specified job from being scheduled. Even when disabled,
1360 the job can be manually started from the console.
1361 kes During 'update slots' clear all InChanger flags where the
1362 StorageId is zero (old Media records).
1364 Beta release 1.38.4:
1366 kes Fix autochanger code to strip leading spaces from returned
1367 slots number. Remove bc from chio-changer.
1368 kes Back port a bit of 1.39 crypto code to reduce diffs.
1369 kes Fix first call to autochanger that missed close()ing the
1370 drive. Put close() just before each run_program(). Fixes
1373 kes Add PoolId to Job record when updating it at job start time.
1375 kes Pull in more code from 1.39 so that there are fewer file
1376 differences (the new ua_dotcmds.c, base64.h, crypto.h
1377 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1378 util.c. Aside from ua_dotcmds.c these are mostly crypto
1380 kes Implement new method of walking the jcr chain. The
1381 incr/dec of the use_count is done within the walking
1382 routines. This should prevent a jcr from being freed
1383 from under the walk routines.
1388 kes Start implementing Verify list output.
1389 kes Move the suitable_drive flag to a better place to prevent
1390 premature termination of the reservation if all drives
1391 are busy -kes should fix Arno's diff/inc pool failures.
1393 kes Add mutex to single thread VSS code in Win32.
1395 kes Simplify code in askdir.c that waits for creating an appendable
1396 volume so that it can handle multiple returns from the wait
1398 kes Modify the wait code to permit multiple returns.
1399 kes Return a zero when 'autochanger drives' is called and
1400 it is not an autochanger.
1401 kes Make rewind_dev() a method taking a DCR as an argument.
1402 This permits closing and reopening the drive if the
1403 rewind fails as happens if the drive was loaded while the
1404 file descriptor was open. This refreshes the file descriptor.
1405 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1406 if the device is open or not. This should eliminate
1408 kes Return error if reserve cannot find at least one suitable device.
1409 kes Make wait_for_sysop() return correct state information.
1410 kes Fix Win32 state file problem. write was not using compat
1411 code. This should fix bug #500.
1413 kes Modify gui on command to set only GUI mode and not batch.
1414 kes Modify .messages command to always print messages regardless
1416 kes If GUI mode is on, suppress automatic printing of
1418 kes Delete old bnet packet code.
1419 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1420 wx-console. -kes not implemented because bconsole must be updated.
1421 kes Modify restore command in wx-console to set gui on and to use
1422 only .messages instead of messages. Hopefully this fixes bug
1424 kes Fix seg fault in exit of acquire when canceling a job --
1425 reported by Wolfgang Denk
1426 kes Pull in latest reservation system changes from 1.38
1427 kes Make .messages command always print messages regardless
1428 of the automessages flag.
1430 kes Fix seg fault if user labels a drive directory bug #513
1431 kes Remove quotes around Version as it breaks things.
1433 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1434 kes Apply sparse code fix for raw drives and fifos. Bug 506
1435 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1437 kes Correct reservation system to do a last ditch try
1438 for any mounted volume, then anyone anywhere.
1439 kes Add quotes around table Version because of
1440 error in MySQL 4.1.15 -kes bug report submitted.
1441 kes Correct some minor problems with btape in the fill
1443 kes Updates to ssh-tunnel from Joshua Kugler.
1444 kes Added a report.pl program from Jonas Bjorklund.
1445 kes Simplify the O_NONBLOCK open() code for tape drives,
1446 and always open nonblocking.
1447 kes Do not wait for open() if EIO returned (shouldn't happen).
1448 kes Eliminate 3 argument to tape open().
1449 kes Correct the slot # edited in the 3995 Bad autochanger unload
1451 kes With -S on bscan (show progress) do not divide by zero.
1453 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1454 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1455 kes Remove unused code in wait_for_device.
1456 kes Make wait_for_device() always return after 60 seconds of wait.
1460 kes Add stubs for non-crypto build.
1462 kes Use localhost if no network configured
1464 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1465 kes Remove debug print.
1466 kes Add bail_out in error during state file reading.
1468 kes Merge changes made to 1.38.3 into HEAD
1469 kes Add stubs for pygtk-console code
1470 kes Create Makefile.in for pygtk-console code
1472 kes Merge updates into 1.38 branch
1473 kes Update specs to include mysql4 define.
1474 kes Fix when attributes are sent, must be after binit().
1475 kes Stop read_record() if status not ok in second loop.
1476 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1477 and partial records in read_record(). This allows bscan
1478 to get FileIndex at EOT correct.
1479 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1481 kes Fix Win32 built to work with new crypto code.
1482 kes Apply patch supplied by user (slightly modified) to fix
1483 correct detection of holes in block devices and FIFOs.
1485 kes Apply patch supplied by user (slightly modified)
1486 to fix SD hang with multiple pools and bad client
1487 IP. Fixes bug # 508.
1489 kes Add nagios plugin to the examples directory. Submitted by
1491 kes Remove warning message about multiple saves of hardlinked files
1492 from find_one.c as it can generate too many warning messages.
1493 kes Modify most restore error messages to be queued so that they
1494 appear at the end of the job rather than mixted with the restore
1495 listing where they could be 'lost'.
1497 kes Reset timeout values before select() per patch from
1498 Frank Sweetser for problems with non-blocking sockets.
1499 kes Unlink the state file if either reading or writing it gets
1500 errors. Hopefully this will fix Win32 exit problems.
1501 kes Add sanity check in append.c to ensure that dcr is not NULL.
1502 This can happen if multiple drive autochanger SCSI control
1503 channel and drive indicies do not correspond.
1505 kes Get next volume from Scratch pool before creating a volume.
1506 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1507 kes Remove argument from create_bacula_database for SQLite as it
1509 kes Add back index code so that two drive autochangers can get
1511 kes Change a bunch of debug levels to aid debugging autochangers.
1512 kes Fix reservation so that mutexes are properly applied.
1513 kes Rework reservation algorithm so that two drives can be used
1516 kes Landon merged his data encription changes into the HEAD
1517 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1518 If this patch is applied, the number of days can be specified with
1519 'list nextvol days=xx'
1521 'status dir days=xx'
1522 My use case is to be able to preview the next scheduled job (and the
1523 next tape to be used) on fridays if there are no scheduled jobs during
1527 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1528 kes Fix malformatted bnet error message that caused seg fault
1530 kes Applied user patch to improve README.vc8 in src/win32.
1532 kes Add Migrate, Copy, Archive Job types (some where there)
1533 kes Correct some more editing of JobId's (for 64 bit compatibility).
1534 kes Ensure that StorageId is stored in Media record when ever possible.
1535 kes Add Migration Job to Job.
1536 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1537 Next Pool to Pool resource.
1538 kes Add more code to mac.c (migration archive copy).
1539 kes Change Start Storage daemon job to require read and write storage
1541 kes Pass read storage data to SD as well as write storage data.
1542 kes Remove old code from winservice.cpp
1543 kes Break on error in scan.
1544 kes Fix typo in signal.c
1545 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1546 kes Cleanup how find_device() works.
1547 kes Add read output to Status in SD.
1550 kes Add red-black btree routines
1552 kes Remove abs() in bfile.c so that it compiles on Solaris.
1555 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1556 kes Fix bnet-server bug found on OpenBSD. Bug #486
1557 kes Fix cancel failure bug. Bug #481
1558 kes Fix failure when Pool name has spaces. Bug #487
1559 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1560 kes Fix a couple of free()s in src/filed/acl.c
1561 kes Fix memory overrun in bfile.c in building OS X resource
1562 fork filename. Bug #489
1563 kes Add Pool name to SD status output.
1565 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1566 kes Make sure to set storage before trying to set drive.
1567 kes Add bacula_mail_summary.sh to examples directory. It makes
1568 a single email summary of any number of jobs. Submitted
1570 kes Make sure when we do a mount to unblock the device even
1571 if the drive could not be opened.
1573 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1574 and correct a few minor problems to make it build on Linux.
1576 kes Remove delete of CVS from all Makefiles
1577 kes Fix seg fault when clicking on Add button in wx-console
1578 restore panel. Bug #470.
1579 kes Fix copyright date and URL typo -kes bug #468.
1580 kes Change autostart install for FreeBSD to look for rc.conf
1581 rather than rc.local as suggested fix for bug #466.
1582 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1583 grant on status. Bug #465
1584 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1585 update script. Bug #464
1586 kes Tweak #ifdefing a bit in new Win32 stream code.
1587 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1588 kes Add documentation of performance #defines