1 Technical notes on version 1.39
5 kes When doing a label, pass the VolBytes back to the Director,
6 which puts it in the catalog.
7 kes Print an error message if the user attempts to prune an
9 kes Need to start using %ld when sscanfing 32 bit values.
11 kes Correct the counting of VolCatBytes for DVDs.
12 kes Add code to mount.c to require that VolCatBytes corresponds to
13 what is actually found when doing an append.
14 kes Update freespace only after writing on the DVD.
15 kes Remove code that blows away the current part in the spool file.
17 kes Apply new dvd-handler patch from Richard Mortimer.
18 kes Tweak so that debug level 20 shows only DVD commands.
19 kes Correct spooled_part flag in dev.c close() so that it is cleared
20 when the spool file is deleted or does not exist.
21 kes Print part number in read_records when eof hit (restore).
23 kes Make find with no args in tree restore return error rather than
24 stopping the selection. Fixes bug #665
25 kes Rework DVD writing to ensure that the last part is written
26 on open_next_part when dealing with a spool file.
27 kes Correct the lseek_dev() routine to handle end point correctly
28 (bug introduced by me).
29 kes Allow part number to exceed num_dvd_parts in lseek_dev().
31 kes Apply dvd-handler patch from Richard Mortimer.
32 kes Apply dvd error check patch from Richard Mortimer.
33 kes Apply bpipe race patch from Richard Mortimer.
34 kes Rework how DVD labels are handled and set append only
35 when part > num_dvd_parts.
37 kes Rework many features of DVD writing and reading. Added many error
38 messages. Most importantly changed part to represent the current
39 part number base zero. This makes current DVD writing incompatible
40 with previous version.
42 kes Add host:port to connect failure messages to FD and SD from Dir.
43 kes Add WhereACL to console ACL list. If nothing is specified, only
44 the default is permitted for restore. Otherwise, *all* allows any
45 path, or you can specify permitted paths. This should allow control
46 over where users can restore files. This is untested.
47 kes Modified message to add a ? (as in loaded?) when querying the autochanger
48 for what Slot is loaded.
49 kes Fixed the use of Slot, so that is more correctly maintained, thus
50 eliminating unneeded duplicate calls to determine what Slot is loaded.
53 kes Install man pages with 'make install'
54 kes wx-console crashes because of differences between Bacula and wxWidgets
55 malloc()/free(). Tweek wx-console to use bmalloc()/bfree() for Bacula
57 kes correct improper indenting in wx-console/console_conf.c
58 kes update wx-console header copyrights
59 kes Fix bug #658 where wx-console mangles file/directory names containing
62 kes Add Media.Enabled flag to client backups for dotcmds.c
63 kes Enforce Media.Enabled=1 for a current restore to work.
64 kes Require restore case 3 to have sqlquery permission to work.
65 kes Remove obsolete del_MAC sql command.
66 kes Ensure that bscan creates Volumes with Enabled=1.
68 Version 1.39.20 beta released:
70 kes Correct missing Client table reference in SQL pointed out by
73 kes Fix Win32 build (new entrypoint, start baculafd).
75 kes Add -n option to bconsole to turn off conio.
76 kes Print JobIds to be migrated in Job Report.
77 kes Add additional user supplied notes to the messages part of
78 bacula-dir.conf concerning multiple email addresses.
79 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
80 kes Add more recent Feature requests to Projects file.
82 kes Apply Maritn's fix to src/win32/Makefile.
83 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
84 kes Implement pruning for Migration and migrated jobs.
85 kes Implement PoolOccupancy migration.
86 kes Implement PoolTime migration.
88 kes If doing a mount, look for a slot, and if specified pass it to
89 the SD so that it can load the autochanger.
90 kes Return DVD=1 flag if a label command is done to a DVD. This
91 permits setting VolParts to 1.
92 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
93 rework ua_label code based on DVD media type to use DVD flag returned.
95 kes Eliminate some compile warnings in dird_conf.c
96 kes Format the bytes field in the terminated jobs part of the status
97 command for the three daemons with suffixes to reduce print size
98 of backup bytes. Suggested by a user.
99 kes When not descending into a directory, print the File= name that
100 triggered it -- makes why not descending a bit clearer.
101 kes Do not unload autochanger when doing a list command -- basic code
102 from Eric Bollengier.
104 kes Fix bug #462 incorrect error message printed when client script called
105 from File= was not found.
106 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
107 do a rewind on Solaris when no tape is in the drive (Solaris does not
108 have the detailed errno found on Linux). Added Solaris specific code.
109 Note, this may apply to other OSes as well.
111 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
112 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
113 fix bug 648 - update sqlite script patches, lock out gnome2console
114 builds for platforms with gtk+ < 2.4.
115 Updated build_rpm.sh - add remote source directory, add switch for
116 signing, refine file names.
117 Updated spec file again for Mandriva build as they have this curious
118 custom of silently converting all manpages to bzip2 format just before
119 the final packaging step.
121 rbn Fixed the Windows Makefiles so that they won't accidently try and
122 pickup binaries for the Unix build. This allows both the Unix
123 build and the Windows build to be built in the same tree without
124 interfering with each other.
125 rbn Fixed error handling and cleaned up mtx-changer.cmd.
126 rbn Added the rest of the database scripts. These are installed but are
127 not yet editted for variable replacement.
128 rbn Broke out the cats functionality from bacula.dll and put into new
129 separate dlls for each database type. At installation time the
130 correct one is copied to bacula_cats.dll.
131 rbn Eliminate the need to install the mysql.dll on client only builds.
132 rbn Moved dird/sql_cmds.c into the cats directory so all the database
133 specific #ifdefs were in the cats directory.
134 rbn Added a new sql_cmds.h with all the declarations for the variables
135 exported from sql_cmds.c.
136 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
137 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
139 kes Correct improperly formated list command output reported by Dan.
141 kes Correct despool time calculation.
143 kes Remove previous changes to compat.cpp as they create problems.
144 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
145 kes Attempt to fix problems with the msg_queue crashing on Solaris
146 when Bacula is terminating, but problems remain.
147 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
148 name editing problems with too many \\?\es.
149 kes Fix some Bacula source code stlye problems in compat.cpp.
150 kes Add debug code to compat.cpp and convert non-Bacula debug code
153 kes Change the name of the technical notes file from kes-1.39 to
154 technotes-1.39. Prefix my messages with 'kes '.
155 kes Allow dequeue_messages() to be called twice. Should fix bug
157 kes Add Job type to bscan Job information output.
159 kes Update copyright date in program files, and for the most part
161 kes Implement %q in bsnprintf.c apparently I forgot it.
163 kes Make disk-changer sed command compatible with FreeBSD.
164 kes Make a first cut at a ReleaseNotes and ChangeLog for a
166 kes Make make clean decend into the src/win32 directory.
167 kes Fix some #ifdefing so that Solaris and FreeBSD compile
168 sys/stat.h was turned off.
169 kes Use suffix editing for new transfer rate messages.
170 kes Attempt to come up with a workaround which seems to be an OS
171 bug where write() returns EBUSY. IMO this should not happen.
172 It triggered in truncatebug test. The workaround retries using
174 kes Eliminate a strerror() call in a class method that failed with
176 kes Use rm -rf rather than rmdir to delete the src/win32/release
177 directory during make clean.
179 kes Make bscan ignore ACL streams.
180 kes Update projects files with new Feature Requests.
181 kes Generate current English and French manuals and upload
183 kes Update the home page to include the new British/French flags to
184 switch between translations. Work done by Alexandre Baron.
185 kes Make disk-changer script print an error message if the changer
186 directory is not defined.
187 kes Create a generic DB routine for getting an int (32/64 bit) from
189 kes Add more migration code.
190 kes Add a few more files to .cvsignore here and there.
191 kes Minor fixes for SD write rate and despooling rate.
192 kes Turn off new test code in src/console.c
196 kes Incremented the version number to signify that all of Robert's code
197 for Win32 that was in the branch is now integrated into the HEAD,
198 and that Eric has submitted code that we hope will provide limited
199 backward compatibility with 1.38 file daemons (more testing to be
201 kes I rationalized a few of the names of the variables (mainly jcr names)
202 that are used during migration as keeping three different jcrs at the
203 same time clear in one's head is not easy.
207 eb Tweak new runscript feature to work with 1.38.x FDs.
208 eb Correct crypto.c to fix segfault when restoring an encrypted stream
209 on fd which don't use rsa keys.
210 eb Add yes/no english keywords on localised yes/no questions.
212 kes Several important commits from Robert Nelson for code cleanup and
214 kes Modify console.c so that when conio is enabled, it converts \n to
215 \n\r before outputting to the console. Hopefully this will fix
216 the problems with expect in Perl that Eric saw.
218 kes Change cats/sql.c to elimate %-*s format, which I think is turned
220 kes Add Comment field to llist of a volume.
221 kes Allow true/false in some yes/no questions.
222 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
223 kes Remove a few /n's when scanning commands from another daemon. This
224 permits adding additional fields later.
225 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
226 kes Update README.mingw
228 kes Tweak authentication to work with 1.38.x FDs.
229 kes Tweak catalog make scripts.
230 kes Fix catalog upgrade scripts so that they work.
231 kes Correct despooling debug code to eliminate race condition.
233 kes Add additional fields as specified by Arno to LocationLog.
234 kes Add comment field to the Media record.
235 kes Add Time field to the Log record.
236 kes Correct migration SQL (thanks to Bill Moran) so that it
237 runs with PostgreSQL also.
238 kes Add spooling/despooling info in status output of SD.
240 kes Spend a lot of time integrating mkcdrec with the rescue disk.
241 kes Add VOLMGMT message class for volume management messages (none yet).
242 kes Add CATALOG as a destination. It goes into the LOG table.
243 kes Implement the Log table in the DB.
244 kes Implement the Location Log table in the DB (for user use).
245 kes At Eric's request add a run_scripts() just after blast_data in
248 kes Add Enabled column to Location, correct some typos in DB schemas.
249 kes Correct bug I introduced into RunScripts enum.
250 kes Add log table to Catalog
251 kes Purge original job migrated if the migration terminates normally.
252 kes Cleanup purging of files/jobs so that it is done only in a
254 kes Add new VOLMGMT message class.
255 kes Add Catalog message destination (user conf code remains to be written).
257 kes Modify read_record and friends to properly deal with migration
259 kes Update debug code in read_record.
261 ======================= Warning ==========================
262 Separate read and write storage in Jobs in the Director. This
263 is a major rewrite of some of the low level code and hence has
264 a high probability of introducing bugs.
265 ==========================================================
267 kes Move the job init code up to *before* the job is put into
268 the job queue (resource allocation queue). This permits the
269 job to establish whether it will read or write or do both.
270 kes Add name() methods to all the resource classes.
271 kes Implement separate read and write storage resource
272 allocation/deallocation in jobq.c
274 ======================= Warning ==========================
275 Implemented new method of getting the default Storage from the Media
276 record rather than from the MediaType for restore. As a fall
277 back, if no Storage is defined, use the MediaType. This
278 eliminates most all prompts if there are multiple MediaTypes
279 used. This is an important and fundamental change.
280 ==========================================================
282 kes Add more detail (Storage, Device) to list of volumes printed
284 kes More code in migrate. In particular start multiple jobs if
286 kes Probably overkill, but ensure that the bsr is unique even within a
288 kes Rework bsys.c drop() so that it now should work as expected.
289 kes Update a bunch of old copyrights -kes particularly in .h files.
290 kes Remove src/lib/bshm.c/h
294 ======================= Warning ==========================
295 All hash codes in the database are now kept in world
296 compatible base64 format (no = filling). This means that
297 all FileSets will be updated and if you are running
298 verify jobs, you must do an InitCatalog.
299 Authentication uses the new algorithm, but should be
300 backward compatible with 1.38.x
301 ===========================================================
303 kes Modify the authentication routines so that the 1.39.15 Director
304 always runs with the compatible binary to base64 code (same as
305 the rest of the world). It will however detect if an SD or
306 FD is running the old code and if that is the case, will use
307 the old algorithm for authentication. However, all consoles must
308 use the compatible algorithm, and all data entered into the database
309 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
310 use the compatible algorithm.
311 kes Rename the cram_md5 routine names to be slightly more appropriate
312 to what they are doing (challenge and respond).
313 kes Robert committed his #ifdef and header cleanup.
315 kes Fix a complier warning in files/backup.c
316 kes Cleanup NOT NULL vs DEFALT 0 in database creation.
318 kes Robert committed his low impact changes.
319 kes I removed a size_t from the jcr.h definition.
320 kes Update the tape regression scripts (still to be tested).
321 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
322 kes Require done or quit to exit from in memory tree restore.
324 kes Write install/uninstall of new manpages. There are now a
325 pile of man pages. Some of which need a lot of work.
327 ======================= Warning ==========================
328 The --mandir ./configure option now points to the top level
329 man directory. The man files will be installed under
330 mandir/man8 and mandir/man1 as appropriate.
331 ==========================================================
333 kes Add complete text of GPL to LICENSE.
334 kes Implement job report that indicates where Storage and Pool
335 came from -kes with overrides and Pool storage and NextPool,
336 it is all very complicated.
337 kes Create a few common subroutines for backup.c and migrate.c
338 kes Eliminate warning messages from tray-monitor.c
340 kes Apply fix for scheduler for missing unlock_jobs().
341 kes Clean out autoconf caches before rebuilding configure
342 kes Fix the FreeBSD pthreads lib define updated by Dan.
343 kes Add missing semicolon in src/console/console.c
344 kes Add Robert's enhanced version of build-win32-cross-tools
345 as well as his patch file.
346 kes Note, the new gcc options are likely to break building of
347 wx-console or the tray-monitor ...
349 kes Implement Robert's suggestion to suppress printing compile lines.
350 kes Detect GCC correctly (I hope)
351 kes If using GCC (actually g++) add the following compiler flags
352 -fno-strict-aliasing -fno-exceptions -fno-rtti
354 ===================== Warning =============================
355 Turn on new bsnprintf() code. This could cause print output
357 ===========================================================
359 kes Fix crypto when not using openssl. I previously overlooked this.
360 kes Eliminate crypto type punning problems by eliminating void * and
361 using uint8_t * instead.
362 kes Harden authentication failure in FD by single threading errors
363 and forcing a 6 second wait.
365 ===================== Warning =============================
366 Removed "Accept Any Volume" directive.
367 ===========================================================
369 kes Major cleanup and simplification of regress using shell functions
370 (more tests to be converted to new format)
371 kes Add detection of 64 bit Irix as indicated by user.
372 kes Increment catalog database id from 9 to 10.
373 kes Add a few of the new database fields to the various C++
375 kes Implement code to fill in the most important new fields (e.g.
377 kes Ensure that most of the new fields are in create/get/insert/update.
378 More work to be done.
380 kes Update some very old licenses in src/cats.
381 kes Modify the database format for handling Migration jobs:
382 Add PriorJobId, RealEndTime to Job table
384 Remove Stripe from JobMedia record (not used, wasting space)
385 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
386 Add Cost to Location table.
387 kes Delete mac_record subroutines.
388 kes Add new table values to create/update/get routines as appropriate.
389 kes Update the update_tables and make_tables scripts.
390 kes Make a first cut in using a union where multiple pointers (actually
391 pointers to pointers) are stored.
392 kes Make some changes to base64.c suggested by Robert and others and add
393 a small amount of documentation.
394 kes Add some changes suggested by Peter for Solaris (bregex...)
395 kes Make runscript.h always built because it needs to be pulled into
396 more places. In particular its RES was left out of a union.
397 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
398 This makes it slightly easier to detect uninitialized variables.
400 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
401 sometimes creates install problems.
402 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
403 Nelson's code. More to do.
404 kes Convert a few store_bit to store_bool in filed_conf.c.
405 kes DVD tweak to block.c as supplied by Uwe Muessel.
407 kes Modify configure.in to check for typeof().
408 kes In findlib/attribs.c use typeof instead of templates if possible.
410 kes Implement partial error messages for src/filed/acl.c
411 kes Fix return code to fail when doing update barcodes and
412 Pool resource is not found. This previously caused Volumes
413 to be labeled as cleaning tapes.
414 kes Small updates to projects.
416 kes Add Eric Bollengier patch for new RunScript directive. It breaks
417 compatibility between dird and fd.
419 kes Prevent DVD code from rewriting label if the device cannot be
421 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
422 fix Debian build bug.
423 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
424 kes Integrate manpages contributed by Jose Luis.
425 kes Update projects file.
426 kes Add manpages Makefile.in to configure.in
427 kes Remove installation of bacula.8 in scripts directory.
429 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
431 O_NOATIME is a open() flag which makes it possible to read a file without
432 updating the inode atime (and also without the inode ctime update which
433 happens if you try to set the atime back to its previous value). It also
434 prevents a race condition when two programs are reading the same file, but
435 only one does not want to change the atime. It's most useful for backup
436 programs and file integrity checkers (and bacula can fit on both
439 Recent versions of the Linux kernel and glibc have support for it (the
440 glibc support being mostly copying the O_NOATIME definition to
441 bits/fcntl.h). If there's no support for it on the kernel, trying to use
442 it does nothing (since the kernel ignores unknown flags).
444 If the kernel has support for it, trying to use it either works, fails
445 silently (mostly in remote filesystems), or returns errno=EPERM (if you
446 are not either the owner of the file or root). A simple way to prevent the
447 failure is to open the file without the flag and set it later with
448 fcntl(F_SETFL), ignoring any EPERM errors.
449 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
450 of restarted jobs to complete (due to a destroyed pthreads conditional
451 variable used by the message thread).
452 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
454 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
455 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
456 colons in query.sql file.
457 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
458 not to create orphans.
459 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
460 in restore long listing.
461 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
462 of incorrect MarkedId.
463 kes Apply patch from adioso bug #616 to correct text in manual (replace
464 Director with File daemon).
465 kes Rework a few of the zlib changes so that they build properly.
468 kes Move DIR "run" command to SD before starting the message thread
469 as suggested by Cristopher Hull to avoid a race deadlock from
470 two threads using the bsock structure.
471 kes Modify LICENSE to correct some problems pointed out by Debian.
473 kes Correct EOF with no \n lex.c problem.
474 kes Tweak compat.h compat.cpp and merge with apcupsd
475 kes Add additional INFO messages if autochanger cannot be used.
478 kes Simplify Win32 Makefile
479 kes Correct count of buffers/bytes used by smartall.c
480 kes Updated compat.h after porting apcupsd to MinGW.
482 kes Work on getting wx-console building on MinGW. wxWidgets now builds
483 started adding Makefile ...
484 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
486 kes Reloading a bad configuration file doesn't kill director any more.
487 Thanks to fix from Eric Bollengier.
489 kes Fix problem of accents with new Win32 code.
490 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
491 works in the MinGW build with the exception that there
492 is a problem with accented characters -kes i.e. there is
493 some mapping problem with wide characters.
494 kes The code no longer compiles with Microsoft VC++.
496 kes Start implementing Christopher's St.Bernard code.
497 kes Add Christopher's mods for opening files.
498 kes Strip \r \n from Win32 error messages (Christopher)
499 kes Add more info about Win32 system if unknown (Christopher)
500 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
501 kes Fix a number of incorrect strings marked for translation, when
502 they should not be (e.g. commands).
503 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
504 Patches supplied by user in bugs #608 and #599.
505 kes Use most recent of st_ctime and st_mtime in restore tree DIR
506 listing. This fixes some problems with Win32 printing incorrect
508 kes Correct the clock shift comm time calculation between the DIR
509 and the FD. It was added rather than subtracted.
510 kes Strip all backslashes in filenames to be restored on Win32
511 machines -kes the names should all be in Unix format, and if
512 there are any backslashes it is most likely due to an improper
513 FileSet definition, and the files will not otherwise be
515 kes Remove lib/regex.c (replaced by bregex.c).
516 kes Delete src/win32/License.txt
517 kes Modify installer to install LICENSE
519 kes Fix bug in build-win32-cross-tools script reported by Howard
520 kes Implement cross compiled bconsole
522 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
523 kes Write first cut of README.mingw32
524 kes Add back ua_label barcode fix from Rufolf Cejka.
525 kes Integrate the majority of the Mingw cross-tools submission
526 made by Howard Thomson. Everything compiles, with zlib, openssl,
527 and VSS turned off. Linking needs a pthreads library ...
529 kes Add 'Dir Status' button to the gnome console.
530 kes More work on migration.
531 kes Restore non-compatible base64 coding to permit compatibility.
532 kes Display heap stats in Storage daemon without debug level.
534 kes Integrate most of the MinGW changes -kes more to do.
536 kes Implement using pg_config for finding PostgreSQL files.
537 Fixes bug #600. Patch supplied by user.
538 kes Remove -t option from mktemp in mtx_changer.in and use
539 working directory. Fixes bug #578.
540 kes Update job start time after the any run before job so that
541 files created by the script are only backed up once. Fixes
543 kes Strip trailing newline only from filenames entered in
544 the restore command when reading a file. This permits
545 the user to enter filenames with trailing spaces. Fixes
546 bug #549. The user supplied a patch that I modified slightly.
547 kes Use the most recent time (st_mtime, st_ctime) in the dir
548 command in restore. This gives the user a better idea of what
549 the newest file really is. This fixes bug #574. The fix
550 was suggested by the user.
551 kes Implement a compatible version of base64. This permits external
552 programs to duplicate Bacula's base64 algorithm using standard
553 routines. This fixes bugs #296, and 565. Patch submitted by
555 ================= Note ========================
556 Previous Signatures stored in the database are no longer
557 compatible with this. The main downside is for Verify jobs,
558 and doing an InitCatalog run will fix the problem. Also, the
559 authentication between the deamons is changed, so all daemons
560 must be simultaneously upgraded.
561 ==============================================
562 If you don't like this fix, set:
563 const bool compatible = true;
565 const bool compatible = false;
568 kes Ensure that DB signature is never NULL.
569 kes Ensure that DB table names are not translated.
570 kes Fix scheduler to handle time skew (eg daylight savings).
571 kes Fix scheduler to use lock_jobs() to avoid most problems
572 with reload. Window is now milliseconds.
574 kes Apply patch from Christopher Hull
575 kes Allow multiple connections to database with different
577 kes Invalidate the scheduler when doing a reload. Fixes seg
578 fault, but still 60 second window.
579 kes Additional info in Reschedule message.
580 kes Use set_jcr_job_status() everywhere to prevent loss of
582 kes Display peer IP in FD if error from connecting DIR.
583 kes Don't increment file count for DIRBEGIN.
584 kes Replace illegal characters in Win32 filename by _.
585 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
586 kes Hash hard link filenames rather than linked list.
587 kes Fix for security failure in chdir on Win32.
588 kes Add CreateDirectoryA/W win32 API entry points.
589 kes Add /silent option to Win32 FD for Install/Remove service.
590 kes Always print Heap statistics in FD.
592 kes Remove the -f option from the chown in Makefile.in for more
594 kes Change setting the group in Makefile.in to use chgrp for
596 kes Implement a write_store and read_store to replace
597 dirstore in reserve.c
598 kes Implement a Bacula read/write lock for Python rather
599 than using the Python lock to avoid recursive problems.
600 kes Correct the uninstall directory names in filed/Makefile.in
601 as reported by a user.
603 kes Correct some problems with database creation (new tables).
604 kes Replace a bunch of old 0x%x by %p.
605 kes Get first cut of Migration with Job selection working.
607 kes Change store_bit() to store_bool() for the Spooling in
608 dird_conf.c -kes bug reported by Robert Nelson.
610 kes Correct Makefile bug found by Dan Langille.
612 kes Correct Makefile for Solaris /bin/sh
613 kes Correct mtx-changer.in for Solaris /bin/sh
614 kes Abort if a conf resource does not have a Name =
616 kes Change the name of the regex program to bregex.
617 kes Add the bwild program to the tools directory. It is similar
618 to the bregex program.
619 kes Implement create bregex.h and bregex.c in src/lib from the
620 Python regexp program.
621 kes Use the new bregex.c to implement Regex expressions on Win32.
623 kes More work on migration.
624 kes Implement wild program in tools directory for testing
625 wild-cards. Almost identical to the regex program.
626 kes Up port VSS single thread locking code.
627 kes Replace N_(..) by NT_(...) to inhibit translation of
629 kes Modify Makefile to change the permissions on Working Directory
630 to 770 if the directory is created.
631 kes Do not fail the Makefile if changing the permissions or
632 owner/group on WorkingDir fails.
633 kes Remove early selection of Scratch Volumes in the recycling
635 kes Correct the old recycling algorithm so that Scratch Volumes
636 are selected when looking for a Volume in the changer.
637 kes Correct a typo in the Verify SQL reported by Joe Park.
639 kes Remove automatic case folding on Windows FDs. You must
640 explictly use the 'Ignore Case = yes' option.
641 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
642 scratch volume in an Autochanger early in the 'recycling'
645 kes Make weof() and clrerror() methods of class DEVICE.
647 kes Tweak license to include Microsoft restrictions.
648 kes Move mysql.reconnect to after real_connect(). Thanks to
649 Frank Sweetser for the patch.
650 kes Disallow a backslash in a File = directive (Windows junk)
651 unless the string is quoted.
652 kes Apply Eric's patch to ua_label.c so that daemon protocol
654 kes Add NT_ definition for strings that should not be translated.
655 kes Apply NT_() to ua_label.c
656 kes Remove timed wait for VSS on Win2K3 as it is not yet
658 kes Correct bacula.in script to reference bacula-ctl-xx in the
659 sysconfig directory rather than the bin directory.
661 kes Fix a long standing bug in the bacula start/stop scripts.
662 kes Attempt to add the new bacula-ctl-* files to the rpm.
663 kes Switch to using typeof() for list traversing to avoid
664 as many FC5 g++ compiler warnings as possible.
666 kes Split the bacula start/start script into four files:
667 bacula -kes starts and stops calling other scripts
668 bacula-ctl-dir -kes starts/stops the director
669 bacula-ctl-fd -kes starts/stops the File daemon
670 bacula-ctl-sd -kes starts/stops the Storage daemon
672 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
673 kes Correct editing of JobId from int to int64 in fd_cmds.c
674 kes Eliminate FileSet name race with bash_spaces() and multiple
675 threads by bashing in a local.
676 kes Fix error return from 'use storage' to print a correct error
677 message rather than nothing.
678 kes Correct false re-read last block error message when two jobs
679 are simultaneously writing at the end of a tape.
680 kes Simplify exit conditions in the reserve.c code to avoid
681 possible non-release of reservation_lock().
682 kes Suffle lock order in reserve to avoid deadlock between
683 reservation lock and device mutex.
685 kes Initialize jcr mutex before first use. Thanks to Thorsten for
686 tracking this down for me !!!! as it broke the Win32 build.
688 kes Integrate addition of line count limitation to bsmtp -l from
689 Sebastian Stark <stark at tuebingen.mpg.de>
691 kes Implement regex test program in tools directory.
692 kes Attempt to fix time problem with bsmtp with foreign langs.
693 kes Add strip_trailing_newline() submitted by user.
694 kes Implement regex matching in migrate.c
696 kes Fix bug #537 to allow arbitrary time to mount a volume for
697 restore, if polling is turned on.
698 kes If dir_user or dir-group is specified in ./configure apply it to
699 the working-dir. Fixes bug #533.
700 kes If rescheduling a job cancel the previous incarnation with the SD.
701 Fixes bugs #566 and 557.
702 kes Fix bug #567 do_message() definition type conflict.
705 kes Add more jcr methods and make mutex and use_count private.
706 kes Create lock/unlock methods for jcr.
707 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
708 records to get to seek position.
709 kes Integrate patch from bug #561 to correct conio.c signal definitions.
710 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
711 terminates correctly by doing pthread_kill(). Do not destroy
712 SD cond wait variable between executions of the job. Use local
713 mutex for cond variable to avoid blocking jcr chain. Fix poor
714 use of jcr use count in jobq.c for restarted jobs.
715 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
716 lib/jcr.c -kes prevents locking the jcr chaing.
717 kes Apply patch from bug #564, which corrects listing volumes with
718 multiple autochangers. Apply same fix to next volume list.
719 kes Fix bug #562 where restore bootstrap file is not unique.
720 kes More details in implementing David's migration syntax proposal.
721 kes Save and restore dcr when swapping drives so that if we have
722 a write dcr it is not lost.
723 kes Use new routine lock_reservations() to lock the reservations
724 system, and call it while looking for a volume in askdir.c.
725 This could possibly fix bug #543.
726 kes Stop SD command loop if job is canceled.
729 kes Remove old code from findlib/create_file.c
730 kes Rename mac.c migrate.c
731 kes Add user friendly display of VolBytes in job report.
732 kes Rename target... to previous... to make it a bit easier to
734 kes Add selection type and selection pattern to Migration (idea
735 given by David Boyes).
738 kes The po files should now be current.
739 kes Fix new sql_use_result() code to properly release the
740 buffers in all cases.
741 kes Use the keyword ujobid to mean the unique job id; job or jobname
742 to mean the Job name given on the Name directive, and jobid to
743 be the numeric (non-unique) job id.
744 kes Allow listing by any of the above.
745 kes Add the user friendly job report code for reporting job elapsed time
746 and rates with suffexes from John Kodis <kodis at comcast.net>.
747 kes Add Priority and JobLevel as Python settable items.
748 kes Use TEMPORARY table creation where the table is created by
750 kes Add new code submitted by Eric for waiting on specific jobid.
751 kes Add ACL checking for the dot commands.
752 kes Fix restore of writable FIFOs.
753 kes Fix a bug in bpipe where the string was freed too early.
755 kes Modify the Python class examples to inherit object -kes new way
756 of defining classes. Patch from Felix Schwarz.
757 kes Implement jobuid to replace old usage of job in keywords as
758 suggested by Eric Bollengier.
759 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
760 wait (wait for all jobs to stop)
762 wait jobuid=unique id
764 kes Implement write variables for Python to set Priority (anytime), and
765 Job Level, only during JobInit event.
767 kes Fix the block listing bug pointed out by Arno.
768 kes Update the po files at Eric's request.
770 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
771 accept time qualifiers.
772 kes Make catalog respect ACL.
773 kes Add recycle count to Media record.
775 Changes to 1.39.6-beta1 24Feb04
777 kes Add Rudolf Cejka's new rc-chio-changer.
778 kes Implement pulling Volume from Scratch Pool if the
779 Volume is in the autochanger.
780 kes Implement additional command arguments for update Volume.
784 kes Back port changes to 1.38.5
785 kes Fix recycle SQL for StorageId.
786 kes Fix misplaced quote in mtx-changer script.
788 kes Note. Your database must be updated, or you must create
789 a new database. I have not yet incremented the database level.
790 kes Add Location table.
791 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
793 kes Implement create/get mac record in database for adding extended
794 Migration data to the job record.
795 kes Add new MAC table to update/make database scripts.
796 kes Return Storage name used when getting VolumeNames for a job.
797 kes Change bsr file keyword Storage to Device, which is more accurate.
798 kes Ensure that Mac records are pruned/purged.
799 kes Tweak SD tools to deal with changing media type.
800 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
801 kes Pass pointer to dcr pointer to acquire_device_for_read() so
802 that the subroutine can switch devices, and hence dcrs.
803 kes Modify the multiple MediaType read code to re-use the same
804 dcr when switching devices. This makes the code much more
806 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
807 from a table for restore.
808 kes Add Storage name to VolParams, but it really should be Device.
810 kes Add disk-changer to scripts directory + configure/Makefile
811 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
812 kes Implement store_bit scanner to replace store_yesno. Mostly done.
813 kes Implement new store_bool that stores in a bool.
814 kes Add true/false to yes/no conf directives.
815 kes Make first cut at changing appropriate store_yesno to store_bool.
816 kes Complete implementation of Pool storage devices.
817 kes Move starting clones to job.c
818 kes Move create_restore_bootstrap_file() to job.c
819 kes Make copy_storage() more general to be able to handle
821 kes Cleanup a lot of migration code for manual running, including
823 kes Move getting a scratch Volume into a subroutine.
824 kes Make all places a Volume that is added to a pool to
826 kes Fix bug in autochanger recycle code (improper edit 64 bit).
827 kes Fix segfault in restore command when no value specified.
828 kes Start adding code to handle multiple MediaTypes in restore.
829 kes Eliminate race condition in getting Volume name for
830 two drive autochanger.
831 kes More debug code in autochanger.
832 kes Add storage keyword to bootstrap file, add parsing.
833 kes Move slot in bsr file into Volume record as there will be
834 a different slot for each Volume.
837 kes Implement Pool storage overrides.
839 kes Implement first cut of Migration.
840 kes Implement mysql_use_result() from patch by Karl Hakimian.
841 This reduces significantly the memory consumption during
842 the restore tree building, and hence runs faster too.
843 kes Implement StorageId patch supplied by user (reggie) in bug
844 #536. This should permit Bacula to work correctly with two
846 kes Implement Job listing variations suggested by a user.
847 kes Move updating bootstrap code in backup.c to subroutine
848 update_bootstrap_file().
849 kes Add new job status elapsed time and bytes written user
850 friendly job report output patch sent by John Kodis
851 <kodis at comcast.ne>.
852 kes Implement a storage list in Pools.
853 kes Separate out setup_job() code from run_job().
854 kes Get migration working -kes lots of changes in mac.c in both
856 kes Apply patch from user (Eric Bollengier I think) that fixes a
857 DIR crash when no arguments are supplied to a dot command.
858 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
859 kes Fix command arg name->volume in label command of gnome-console.
860 kes Fix SD acquire.c to release correct DCR by explicitly testing
861 on the dcr address rather than trying to devine if it is a read
862 or write dcr. This failed in error conditions when the device was
866 kes Apply user supplied patch for more readable rate output
868 kes Continue implementing migration.
869 kes Implement support for removable filesystems in SD.
870 kes Ensure that btraceback scripts can be read by anyone.
871 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
872 kes Correct bug where canceling restore before the FD contacts
873 the SD causes the drive to be left in read mode.
874 kes Move ofline_or_rewind into DEVICE::close().
875 kes Eliminate close_device.
876 kes Convert several dev subroutines to methods (e.g. bsf,
878 kes Eliminate force_close_device().
879 kes Implement Device Type directive in Device resource that
880 can have values File, Tape, Fifo, DVD, or Prog.
881 kes Add has_cap() method to Device.
884 kes Add patch from bug #527 to allow RedHat user to specify
885 options/user/group for starting each daemon in
888 kes Add two new queries to query.sql provided by Arno. One
889 list volumes known to the Storage device, and the other
890 lists volumes possibly needing replacement (error, ...).
892 kes Add periodic (every 24 hours) garbage collection of memory
893 pool by releasing free buffers.
895 kes Correct bug counting sized (for display only) in smartall.c
896 kes Print FD mempool stats if debug > 0 rather than 5.
898 kes Make db_lock() mutex error fail the job rather than abort
899 Bacula. Canceling the job caused the mutex to fail.
900 kes Correct bug in alist.c that re-allocated the list if the
901 number of items goes to zero.
902 kes Move the reservation system thread locking to the top level
903 so that one job at a time tries all possible drives before
905 kes Implement a reservation 'fail' message queue that is built
906 and destroyed on each pass through the reservation system.
907 These messages are displayed in a 'Jobs waiting to reserve
908 a drive' list during a 'status storage='. Note, multiple
909 messages will generally print for each JobId because they
910 represent the different problems with either the same drive
911 or different drives. If this output proves too confusing
912 of voluminous, I will display it only when debug level 1
913 or greater is enabled in the SD.
915 kes Add enable/disable job=<job-name>. This command prevents
916 the specified job from being scheduled. Even when disabled,
917 the job can be manually started from the console.
918 kes During 'update slots' clear all InChanger flags where the
919 StorageId is zero (old Media records).
923 kes Fix autochanger code to strip leading spaces from returned
924 slots number. Remove bc from chio-changer.
925 kes Back port a bit of 1.39 crypto code to reduce diffs.
926 kes Fix first call to autochanger that missed close()ing the
927 drive. Put close() just before each run_program(). Fixes
930 kes Add PoolId to Job record when updating it at job start time.
932 kes Pull in more code from 1.39 so that there are fewer file
933 differences (the new ua_dotcmds.c, base64.h, crypto.h
934 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
935 util.c. Aside from ua_dotcmds.c these are mostly crypto
937 kes Implement new method of walking the jcr chain. The
938 incr/dec of the use_count is done within the walking
939 routines. This should prevent a jcr from being freed
940 from under the walk routines.
945 kes Start implementing Verify list output.
946 kes Move the suitable_drive flag to a better place to prevent
947 premature termination of the reservation if all drives
948 are busy -kes should fix Arno's diff/inc pool failures.
950 kes Add mutex to single thread VSS code in Win32.
952 kes Simplify code in askdir.c that waits for creating an appendable
953 volume so that it can handle multiple returns from the wait
955 kes Modify the wait code to permit multiple returns.
956 kes Return a zero when "autochanger drives" is called and
957 it is not an autochanger.
958 kes Make rewind_dev() a method taking a DCR as an argument.
959 This permits closing and reopening the drive if the
960 rewind fails as happens if the drive was loaded while the
961 file descriptor was open. This refreshes the file descriptor.
962 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
963 if the device is open or not. This should eliminate
965 kes Return error if reserve cannot find at least one suitable device.
966 kes Make wait_for_sysop() return correct state information.
967 kes Fix Win32 state file problem. write was not using compat
968 code. This should fix bug #500.
970 kes Modify gui on command to set only GUI mode and not batch.
971 kes Modify .messages command to always print messages regardless
973 kes If GUI mode is on, suppress automatic printing of
975 kes Delete old bnet packet code.
976 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
977 wx-console. -kes not implemented because bconsole must be updated.
978 kes Modify restore command in wx-console to set gui on and to use
979 only .messages instead of messages. Hopefully this fixes bug
981 kes Fix seg fault in exit of acquire when canceling a job --
982 reported by Wolfgang Denk
983 kes Pull in latest reservation system changes from 1.38
984 kes Make .messages command always print messages regardless
985 of the automessages flag.
987 kes Fix seg fault if user labels a drive directory bug #513
988 kes Remove quotes around Version as it breaks things.
990 kes Merge in Aleksandar Milivojevic's mods to the spec file.
991 kes Apply sparse code fix for raw drives and fifos. Bug 506
992 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
994 kes Correct reservation system to do a last ditch try
995 for any mounted volume, then anyone anywhere.
996 kes Add quotes around table Version because of
997 error in MySQL 4.1.15 -kes bug report submitted.
998 kes Correct some minor problems with btape in the fill
1000 kes Updates to ssh-tunnel from Joshua Kugler.
1001 kes Added a report.pl program from Jonas Bjorklund.
1002 kes Simplify the O_NONBLOCK open() code for tape drives,
1003 and always open nonblocking.
1004 kes Do not wait for open() if EIO returned (shouldn't happen).
1005 kes Eliminate 3 argument to tape open().
1006 kes Correct the slot # edited in the 3995 Bad autochanger unload
1008 kes With -S on bscan (show progress) do not divide by zero.
1010 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1011 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1012 kes Remove unused code in wait_for_device.
1013 kes Make wait_for_device() always return after 60 seconds of wait.
1017 kes Add stubs for non-crypto build.
1019 kes Use localhost if no network configured
1021 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1022 kes Remove debug print.
1023 kes Add bail_out in error during state file reading.
1025 kes Merge changes made to 1.38.3 into HEAD
1026 kes Add stubs for pygtk-console code
1027 kes Create Makefile.in for pygtk-console code
1029 kes Merge updates into 1.38 branch
1030 kes Update specs to include mysql4 define.
1031 kes Fix when attributes are sent, must be after binit().
1032 kes Stop read_record() if status not ok in second loop.
1033 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1034 and partial records in read_record(). This allows bscan
1035 to get FileIndex at EOT correct.
1036 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1038 kes Fix Win32 built to work with new crypto code.
1039 kes Apply patch supplied by user (slightly modified) to fix
1040 correct detection of holes in block devices and FIFOs.
1042 kes Apply patch supplied by user (slightly modified)
1043 to fix SD hang with multiple pools and bad client
1044 IP. Fixes bug # 508.
1046 kes Add nagios plugin to the examples directory. Submitted by
1048 kes Remove warning message about multiple saves of hardlinked files
1049 from find_one.c as it can generate too many warning messages.
1050 kes Modify most restore error messages to be queued so that they
1051 appear at the end of the job rather than mixted with the restore
1052 listing where they could be "lost".
1054 kes Reset timeout values before select() per patch from
1055 Frank Sweetser for problems with non-blocking sockets.
1056 kes Unlink the state file if either reading or writing it gets
1057 errors. Hopefully this will fix Win32 exit problems.
1058 kes Add sanity check in append.c to ensure that dcr is not NULL.
1059 This can happen if multiple drive autochanger SCSI control
1060 channel and drive indicies do not correspond.
1062 kes Get next volume from Scratch pool before creating a volume.
1063 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1064 kes Remove argument from create_bacula_database for SQLite as it
1066 kes Add back index code so that two drive autochangers can get
1068 kes Change a bunch of debug levels to aid debugging autochangers.
1069 kes Fix reservation so that mutexes are properly applied.
1070 kes Rework reservation algorithm so that two drives can be used
1073 kes Landon merged his data encription changes into the HEAD
1074 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1075 If this patch is applied, the number of days can be specified with
1076 "list nextvol days=xx"
1078 "status dir days=xx"
1079 My use case is to be able to preview the next scheduled job (and the
1080 next tape to be used) on fridays if there are no scheduled jobs during
1084 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1085 kes Fix malformatted bnet error message that caused seg fault
1087 kes Applied user patch to improve README.vc8 in src/win32.
1089 kes Add Migrate, Copy, Archive Job types (some where there)
1090 kes Correct some more editing of JobId's (for 64 bit compatibility).
1091 kes Ensure that StorageId is stored in Media record when ever possible.
1092 kes Add Migration Job to Job.
1093 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1094 Next Pool to Pool resource.
1095 kes Add more code to mac.c (migration archive copy).
1096 kes Change Start Storage daemon job to require read and write storage
1098 kes Pass read storage data to SD as well as write storage data.
1099 kes Remove old code from winservice.cpp
1100 kes Break on error in scan.
1101 kes Fix typo in signal.c
1102 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1103 kes Cleanup how find_device() works.
1104 kes Add read output to Status in SD.
1107 kes Add red-black btree routines
1109 kes Remove abs() in bfile.c so that it compiles on Solaris.
1112 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1113 kes Fix bnet-server bug found on OpenBSD. Bug #486
1114 kes Fix cancel failure bug. Bug #481
1115 kes Fix failure when Pool name has spaces. Bug #487
1116 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1117 kes Fix a couple of free()s in src/filed/acl.c
1118 kes Fix memory overrun in bfile.c in building OS X resource
1119 fork filename. Bug #489
1120 kes Add Pool name to SD status output.
1122 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1123 kes Make sure to set storage before trying to set drive.
1124 kes Add bacula_mail_summary.sh to examples directory. It makes
1125 a single email summary of any number of jobs. Submitted
1127 kes Make sure when we do a mount to unblock the device even
1128 if the drive could not be opened.
1130 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1131 and correct a few minor problems to make it build on Linux.
1133 kes Remove delete of CVS from all Makefiles
1134 kes Fix seg fault when clicking on Add button in wx-console
1135 restore panel. Bug #470.
1136 kes Fix copyright date and URL typo -kes bug #468.
1137 kes Change autostart install for FreeBSD to look for rc.conf
1138 rather than rc.local as suggested fix for bug #466.
1139 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1140 grant on status. Bug #465
1141 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1142 update script. Bug #464
1143 kes Tweak #ifdefing a bit in new Win32 stream code.
1144 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1145 kes Add documentation of performance #defines
projects / bacula / bacula / blob