1 Technical notes on version 1.39
6 kes Fix optional files in Makefile.in of src/filed that caused
7 a syntax error when using no optional files.
9 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
10 messages; there is no reason to attempt to load a private key.
11 from master key files.
13 Version 1.39.24 released:
15 kes Apply the three patches from Richard Mortimer.
16 bacula-reposition.patch, bacula-tape-reopen.patch, and
17 bacula-eod.patch. This corrects tape positioning on older devices,
18 and also a problem with btape.
19 kes Apply fix from bug report #696 where writing to a FIFO does not
20 work due to a dumb typo.
21 kes Unlock the tape door before the file descriptor is released. This
22 should fix lots of somewhat subtle failures when using an autochanger.
24 kes Correct mtx-changer bug that I introduced in a recent commit, and
25 pointed out by Robert Nelson -- thanks.
26 rbn Fix Windows' daemons so that messages print to stdout if not
28 rbn Add daemon name to trace file name (eg bacula-dir.trace).
29 rbn Fix environment variable expansion in directory names on Windows.
30 rbn Fix autochanger support in fill command.
31 rbn Update SQL scripts to match Unix versions.
32 rbn Fix daemon usage displays.
33 rbn Cleanup bacula-dir.conf template.
34 rbn Install openssl.cnf so that the openssl.exe installed in the
35 Bacula\bin directory can be used to generate keys and
36 certificates for TLS and encryption.
37 rbn Fix cleanup of spool files on Windows.
38 rbn Remove /silent option from daemons on Windows. The new default
39 is the same as the old /silent. To enable the message boxes that
40 previously were suppressed by /silent you must add /debug instead.
41 NOTE: As a result of this change, the first time you upgrade from
42 a previous version of 1.39.x you will receive the message
43 boxes when the remove of the old services succeeds. This
44 is the same behaviour as when migrating from a version prior
46 However, going forward, these message boxes will not appear on
47 upgrades or new installs.
48 rbn Add new /debug option. This option enables the message boxes that
49 previously were suppressed by the /silent option. In addition the
50 daemons running as services will open a console window if this
52 rbn Fix bug with service not being removed on migrated installs. This
53 should correct those cases where the file daemon install was failing
54 when upgrading from versions prior to 1.39.x.
57 kes Turn on heap reporting in Dir with zero debug level.
58 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
59 send the same message to stdout.
61 kes Begin work on new GUI "console".
62 kes Make configure look in non-standard MySQL library directory
64 kes Make mtx-changer automatically configure the autochanger wait
65 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
67 kes Correct drop_sqlite_tables.in script to not delete the database.
68 kes When writing to a log file, close and reopen the file descriptor
69 if there is an error writing the file.
70 kes Modify the autochanger loaded?, load, and unload commands to print
71 the full text of any mtx output if there is an error. Helps to
72 ease diagnosis of autochanger problems.
73 kes Correct a few Win32 errno returns in the VSS code so that hopefully
74 a resonable Win32 error message will be printed.
75 kes Convert a few strcat()... to bstrncat() in the Win32 code.
77 rbn Added Windows version of bsmtp.
78 rbn Fixed path search for Windows so that Bacula\bin is automatically
79 searched for programs and scripts.
80 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
83 Version 1.39.24 released:
85 kes Apply dvd find volume patch from Richard Mortimer.
86 kes Eliminate the dvd specific mount routines using only the
88 kes Make update_free_space a method of DEVICE and rename
91 kes Require a messages command acl to be able to receive messages
93 kes Add console, system, and scan job types in util.c.
95 kes Print the Volume purged message only for real jobs to keep
96 from cluttering up the daemon messages.
97 kes Lock the tape drive door while Bacula is using the device.
98 kes Add back the 'No Jobs running' message to FD and SD status because
99 my regression script depends on it, and I'm too lazy to change the
101 kes Start using structure assignments (not too happy about it ...).
102 kes Fix a bug in the tools Makefile that broke on Solaris.
103 kes Unload any autochanger drive during a 'release' command.
105 kes Enhance error message when restoring without bootstrap file.
106 kes Check restored size only for regular files.
107 kes Store Python job level in job record in Dir.
108 kes Add back code to open tape device nonblocking, but if rewind fails
109 release file descriptor.
110 kes Modify acquire.c to first try autoloading the device. Also, ask operator
111 to mount tape if drive cannot be opened.
112 rbn Made Windows service tray status windows resizable.
113 rbn Fixed horizontal scrolling of text in status window.
114 rbn Preserve horizontal and vertical scroll position while
115 updating. This prevents the display being reset to the
116 top line every 5 seconds.
117 rbn Fix Windows cross-compile compatibilty problems with
118 *nix variants such as OS X without the zic command.
119 rbn Eliminate dependency on man2html.
121 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
123 kes Fix a compiler warning in compat.cpp
124 kes Change strcpy to bstrncpy in compat.cpp
125 kes Remove some broken code in bdb_list.c
126 kes Fix, hopefully the last, ACL problem in the restore command.
127 kes Update the README.mingw32
128 kes Add new version of upgrade-win32-client.txt to examples directory.
129 Submitted by Michel Meyers.
130 kes Print an INFO message in the job report when a Volume is marked Purged.
131 rbn Fixed handling of external program and script execution
132 so that the format of the command line is more flexible.
133 Now executable path names containing spaces are translated
134 to the equivalent short name automatically. The result is
135 passed to cmd.exe with the quotes removed.
137 kes Apply the recycle patch from Richard Mortimer.
138 kes Convert a few if statements in dev.c to switch statements.
139 kes Start using print_errmsg instead of bstrerror().
140 kes Print a job message in SD when a job is marked to be canceled.
142 kes All code added back. Fixed block.c read/write to loop only 3
143 times. This apparently keeps the OS from crashing (at least
145 kes The kernel bug still persists. Backup something then immediately
146 do a bscan on the same tape, and the kernel will crash.
147 kes Simplifed tape open(). It no longer uses nonblocking mode, which
148 means that opening with no tape loaded will probably take at least
149 6 minutes before an error is reported.
150 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
151 when doing set_os_device_parameters.
152 kes Report open error in mount.c
153 kes Remove all .exe files from the installer directory on make clean.
155 kes Start adding back removed code.
156 kes Back out a number of changes because backups to tape crash my
158 kes Remove the inetd code from the File daemon.
160 kes Add -c option to pg_dump so that it initializes tables when
162 kes Fix FirstWritten time on Volume to be obtained from SD so that
163 it is the actual time the volume was first written.
164 kes Minor Makefile changes.
165 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
166 ebl Add yes keyword to prune/purge command
168 kes Correct a test in block.c that prevented restore of a DVD from
169 looking at the last part in the spool directory.
170 kes Make some error messages clearer mostly by using the word DVD
171 in the message. Improve infor message in read_record for DVDs.
172 kes Remove DVD kludges in dircmd.c label/relabel.
173 kes Move the dvd relabel code from dircmd.c into
174 write_new_volume_label_to_dvd() adding a relabel argument.
175 kes Rewrite the truncate_dvd() code to be much simpler and
176 more logical. First blow away any spool part, then create a
177 new empty part and write to the DVD.
178 kes Rewrite the can_write_on_non_blank_dvd() code making it
179 only ensure that no valid data is on the DVD -- i.e. it
182 kes Minor Makefile fixes.
183 kes Put attach_dcr_to_dev in a subroutine.
184 kes Make attaching/detaching to/from a device use a flag and
185 only detach if actually attached.
186 kes Add dvd-simulator.in to scripts directory and add to configure.
187 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
188 This could be a cause of a number of drive reservation problems.
189 Note, this code is now in attach_dcr_to_dev().
190 kes Suppress doing Volume updates if it is a system job. This should
191 prevent the DVD label blocking.
192 kes Clear the freespace ok flag in a couple of strategic places.
194 kes Put removing zero sized spool part file in subroutine and
195 call from release_device().
196 kes Add Richard's patch for relabel to dircmd.c, but save and restore
198 kes Rework a lot of subroutines in dev.c to take dcr as an
199 argument. This is done to eliminate the usage of attached_dcrs
201 kes Change truncated_dvd to blank_dvd, which seems more suitable.
202 kes Apply most of Richard Mortimer's truncate patch.
203 kes Create lseek() method for DEVICE that takes dcr as an
204 argument. This is to eliminate the use of attached_dcrs in
205 lseek(). The calls to lseek_dev() must still be changed.
207 kes Apply Richard Mortimer's patches for printing an error
208 message in btape when a DVD is used, and to initialize traceback.
209 kes Added error message to btape when trying to access a file.
210 kes Move prototype of update_slots() to protos.h.
212 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
213 and FDJobStatus to the Director Python variables.
214 kes Make sure valid argument passed to str_to_utime() where Arno
216 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
217 I.e. part of two different patches.
219 kes Modify disk changer to simulate some of the error conditions
221 kes Make sure the close() call in the SD tools is just before the
223 kes Implement dir_get_volume_info() in bls using the patch from
224 Richard Mortimer but call find_num_dvd_parts().
225 kes Implement find_num_dvd_parts() that mounts and scans a DVD
226 and counts the parts.
227 kes Move the omode code in open_dvd() up so that the cannot
228 write on blank disk can check can be bypassed for read mode.
231 kes Disable normal data spooling for DVD writing which uses
232 a different spooling mechanism.
233 kes Apply patch from Richard Mortimer to ensure that the number
234 of DVD parts is correctly updated.
235 rbn Save installer details log in the Bacula directory as
237 rbn Add installer generation of client and storage templates
238 suitable for @inclusion on the director.
239 rbn Mark previously installed Win32 components read-only since
240 deselection doesn't do anything.
242 Version 1.39.22 beta released:
244 kes Fix logic error in handling error return from mtx-changer
246 kes Make status from SD aware of -1 (unknown) Slot status.
247 kes At Eric's suggestion make both the 'slots' and 'drive' commands
248 to the Storage daemon work even if the drive is busy.
249 kes Make two separate Win32 menu links for starting bconsole and
250 wx-console in winbacula.nsi
251 kes Apply DVD part_spooled patch from Richard Mortimer
252 richm@oldelvet.org.uk
253 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
254 rbn Fixed problems migrating settings from previous releases in
255 Win32 installer. Add Readme.txt with an option to show it on
256 the installer Finish page.
258 kes Use get_catalog_resource() to open catalog database
259 to ensure that ACLs are respected and that user is
260 correctly prompted for database.
261 kes Integrate multiple console/director patch from
262 Carsten Paeth calle@calle.in-berlin.de
263 ebl Add character substitution in Job/JobDefs WriteBootStrap.
264 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
265 kes Apply patch supplied in bug #656 to pass priority field
266 in the run dialog to the Director in gnome console
267 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
268 this will fix bug #627 where Bacula eventually gets
269 confused about what Volume it wants.
270 kes Add a new close_part() class in the SD to save the device
271 state around open/close_part/open for DVD writing. This
272 should fix the num_dvd_parts getting zeroed as reported by
274 kes Apply patch from Richard Mortimer that correct edit code
275 for debug output of st_size.
276 ebl Add support of encrypted data stream to bscan.
277 display data_len instead of data content (may be binary)
279 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
280 bcopy. Fixes bug #669 reported by Eric.
281 kes Fix incorrect number of arguments in SQL statement in
282 sql_get.c as reported by Eric.
284 kes Update examples directory.
285 kes Remove unused variable in winservice.cpp
286 kes Make Win32 make command build installer.
287 rbn Add new Install Type page, used to select between Automatic
288 and Custom installs. Automatic installs only prompt for
289 configuration items that can't be reasonably defaulted.
290 rbn Added Bacula logo to page headers.
291 rbn Added Upgrade support
292 - Configuration and component selection are migrated from
294 - Configuration of upgraded components is preserved and
296 - Configuration of new components is handled according to
297 the Automatic / Custom selection.
298 - Component selection is defaulted to previously selected
300 rbn Installation of Server components is disabled on
301 Windows 95, 98 and ME.
302 rbn Added URLs for support, info and upgrades to Bacula entry
303 in Add/Remove Programs.
304 rbn Added Version info to Bacula entry in Add/Remove Programs.
306 kes Correct dvd code that breaks tape labeling.
307 kes Implement Enabled on update slots.
309 kes When doing a label, pass the VolBytes back to the Director,
310 which puts it in the catalog.
311 kes Print an error message if the user attempts to prune an
313 kes Need to start using %ld when sscanfing 32 bit values.
315 kes Correct the counting of VolCatBytes for DVDs.
316 kes Add code to mount.c to require that VolCatBytes corresponds to
317 what is actually found when doing an append.
318 kes Update freespace only after writing on the DVD.
319 kes Remove code that blows away the current part in the spool file.
321 kes Apply new dvd-handler patch from Richard Mortimer.
322 kes Tweak so that debug level 20 shows only DVD commands.
323 kes Correct spooled_part flag in dev.c close() so that it is cleared
324 when the spool file is deleted or does not exist.
325 kes Print part number in read_records when eof hit (restore).
326 rbn Installer default changed to start services on new install.
328 kes Make find with no args in tree restore return error rather than
329 stopping the selection. Fixes bug #665
330 kes Rework DVD writing to ensure that the last part is written
331 on open_next_part when dealing with a spool file.
332 kes Correct the lseek_dev() routine to handle end point correctly
333 (bug introduced by me).
334 kes Allow part number to exceed num_dvd_parts in lseek_dev().
335 rbn Change make_session_key on Windows to use WIN32 APIs to produce
337 rbn Add new tool scsilist.exe which displays the changer, tape and
338 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
339 to add them to bacula-sd.conf.
341 kes Apply dvd-handler patch from Richard Mortimer.
342 kes Apply dvd error check patch from Richard Mortimer.
343 kes Apply bpipe race patch from Richard Mortimer.
344 kes Rework how DVD labels are handled and set append only
345 when part > num_dvd_parts.
347 kes Rework many features of DVD writing and reading. Added many error
348 messages. Most importantly changed part to represent the current
349 part number base zero. This makes current DVD writing incompatible
350 with previous version.
352 kes Add host:port to connect failure messages to FD and SD from Dir.
353 kes Add WhereACL to console ACL list. If nothing is specified, only
354 the default is permitted for restore. Otherwise, *all* allows any
355 path, or you can specify permitted paths. This should allow control
356 over where users can restore files. This is untested.
357 kes Modified message to add a ? (as in loaded?) when querying the autochanger
358 for what Slot is loaded.
359 kes Fixed the use of Slot, so that is more correctly maintained, thus
360 eliminating unneeded duplicate calls to determine what Slot is loaded.
362 kes Install man pages with 'make install'
363 kes wx-console crashes because of differences between Bacula and wxWidgets
364 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
366 kes correct improper indenting in wx-console/console_conf.c
367 kes update wx-console header copyrights
368 kes Fix bug #658 where wx-console mangles file/directory names containing
371 kes Add Media.Enabled flag to client backups for dotcmds.c
372 kes Enforce Media.Enabled=1 for a current restore to work.
373 kes Require restore case 3 to have sqlquery permission to work.
374 kes Remove obsolete del_MAC sql command.
375 kes Ensure that bscan creates Volumes with Enabled=1.
377 Version 1.39.20 beta released:
379 kes Correct missing Client table reference in SQL pointed out by
382 kes Fix Win32 build (new entrypoint, start baculafd).
384 kes Add -n option to bconsole to turn off conio.
385 kes Print JobIds to be migrated in Job Report.
386 kes Add additional user supplied notes to the messages part of
387 bacula-dir.conf concerning multiple email addresses.
388 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
389 kes Add more recent Feature requests to Projects file.
391 kes Apply Maritn's fix to src/win32/Makefile.
392 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
393 kes Implement pruning for Migration and migrated jobs.
394 kes Implement PoolOccupancy migration.
395 kes Implement PoolTime migration.
397 kes If doing a mount, look for a slot, and if specified pass it to
398 the SD so that it can load the autochanger.
399 kes Return DVD=1 flag if a label command is done to a DVD. This
400 permits setting VolParts to 1.
401 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
402 rework ua_label code based on DVD media type to use DVD flag returned.
404 kes Eliminate some compile warnings in dird_conf.c
405 kes Format the bytes field in the terminated jobs part of the status
406 command for the three daemons with suffixes to reduce print size
407 of backup bytes. Suggested by a user.
408 kes When not descending into a directory, print the File= name that
409 triggered it -- makes why not descending a bit clearer.
410 kes Do not unload autochanger when doing a list command -- basic code
411 from Eric Bollengier.
413 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
414 to build-depkgs-mingw32. It now handles two options -h to display
415 help and -C to reextract the source and apply the patches. The -C
416 option is useful for updating the source after new patches are
418 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
419 This allows updating to new versions without having to modify the
420 script and makes it easier to figure out which packages and which
422 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
423 as build-depkgs-mingw32 except they are built using Microsoft Visual C
424 and placed in the depkgs-msvc directory. There is also an
425 External-msvc file to describe the packages.
427 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
429 kes Fix bug #462 incorrect error message printed when client script called
430 from File= was not found.
431 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
432 do a rewind on Solaris when no tape is in the drive (Solaris does not
433 have the detailed errno found on Linux). Added Solaris specific code.
434 Note, this may apply to other OSes as well.
436 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
437 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
438 fix bug 648 - update sqlite script patches, lock out gnome2console
439 builds for platforms with gtk+ < 2.4.
440 Updated build_rpm.sh - add remote source directory, add switch for
441 signing, refine file names.
442 Updated spec file again for Mandriva build as they have this curious
443 custom of silently converting all manpages to bzip2 format just before
444 the final packaging step.
446 rbn Fixed the Windows Makefiles so that they won't accidentally try and
447 pickup binaries for the Unix build. This allows both the Unix
448 build and the Windows build to be built in the same tree without
449 interfering with each other.
450 rbn Fixed error handling and cleaned up mtx-changer.cmd.
451 rbn Added the rest of the database scripts. These are installed but are
452 not yet edited for variable replacement.
453 rbn Broke out the cats functionality from bacula.dll and put into new
454 separate dlls for each database type. At installation time the
455 correct one is copied to bacula_cats.dll.
456 rbn Eliminate the need to install the mysql.dll on client only builds.
457 rbn Moved dird/sql_cmds.c into the cats directory so all the database
458 specific #ifdefs were in the cats directory.
459 rbn Added a new sql_cmds.h with all the declarations for the variables
460 exported from sql_cmds.c.
461 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
462 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
464 kes Correct improperly formatted list command output reported by Dan.
466 kes Correct despool time calculation.
468 kes Remove previous changes to compat.cpp as they create problems.
469 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
470 kes Attempt to fix problems with the msg_queue crashing on Solaris
471 when Bacula is terminating, but problems remain.
472 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
473 name editing problems with too many \\?\es.
474 kes Fix some Bacula source code style problems in compat.cpp.
475 kes Add debug code to compat.cpp and convert non-Bacula debug code
478 kes Change the name of the technical notes file from kes-1.39 to
479 technotes-1.39. Prefix my messages with 'kes '.
480 kes Allow dequeue_messages() to be called twice. Should fix bug
482 kes Add Job type to bscan Job information output.
484 kes Update copyright date in program files, and for the most part
486 kes Implement %q in bsnprintf.c apparently I forgot it.
488 kes Make disk-changer sed command compatible with FreeBSD.
489 kes Make a first cut at a ReleaseNotes and ChangeLog for a
491 kes Make make clean descend into the src/win32 directory.
492 kes Fix some #ifdefing so that Solaris and FreeBSD compile
493 sys/stat.h was turned off.
494 kes Use suffix editing for new transfer rate messages.
495 kes Attempt to come up with a workaround which seems to be an OS
496 bug where write() returns EBUSY. IMO this should not happen.
497 It triggered in truncatebug test. The workaround retries using
499 kes Eliminate a strerror() call in a class method that failed with
501 kes Use rm -rf rather than rmdir to delete the src/win32/release
502 directory during make clean.
504 kes Make bscan ignore ACL streams.
505 kes Update projects files with new Feature Requests.
506 kes Generate current English and French manuals and upload
508 kes Update the home page to include the new British/French flags to
509 switch between translations. Work done by Alexandre Baron.
510 kes Make disk-changer script print an error message if the changer
511 directory is not defined.
512 kes Create a generic DB routine for getting an int (32/64 bit) from
514 kes Add more migration code.
515 kes Add a few more files to .cvsignore here and there.
516 kes Minor fixes for SD write rate and despooling rate.
517 kes Turn off new test code in src/console.c
521 kes Incremented the version number to signify that all of Robert's code
522 for Win32 that was in the branch is now integrated into the HEAD,
523 and that Eric has submitted code that we hope will provide limited
524 backward compatibility with 1.38 file daemons (more testing to be
526 kes I rationalized a few of the names of the variables (mainly jcr names)
527 that are used during migration as keeping three different jcrs at the
528 same time clear in ones head is not easy.
532 eb Tweak new runscript feature to work with 1.38.x FDs.
533 eb Correct crypto.c to fix segfault when restoring an encrypted stream
534 on fd which don't use rsa keys.
535 eb Add yes/no English keywords on localized yes/no questions.
537 kes Several important commits from Robert Nelson for code cleanup and
539 kes Modify console.c so that when conio is enabled, it converts \n to
540 \n\r before outputting to the console. Hopefully this will fix
541 the problems with expect in Perl that Eric saw.
543 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
545 kes Add Comment field to llist of a volume.
546 kes Allow true/false in some yes/no questions.
547 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
548 kes Remove a few /n's when scanning commands from another daemon. This
549 permits adding additional fields later.
550 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
551 kes Update README.mingw
553 kes Tweak authentication to work with 1.38.x FDs.
554 kes Tweak catalog make scripts.
555 kes Fix catalog upgrade scripts so that they work.
556 kes Correct despooling debug code to eliminate race condition.
558 kes Add additional fields as specified by Arno to LocationLog.
559 kes Add comment field to the Media record.
560 kes Add Time field to the Log record.
561 kes Correct migration SQL (thanks to Bill Moran) so that it
562 runs with PostgreSQL also.
563 kes Add spooling/despooling info in status output of SD.
565 kes Spend a lot of time integrating mkcdrec with the rescue disk.
566 kes Add VOLMGMT message class for volume management messages (none yet).
567 kes Add CATALOG as a destination. It goes into the LOG table.
568 kes Implement the Log table in the DB.
569 kes Implement the Location Log table in the DB (for user use).
570 kes At Eric's request add a run_scripts() just after blast_data in
573 kes Add Enabled column to Location, correct some typos in DB schemas.
574 kes Correct bug I introduced into RunScripts enum.
575 kes Add log table to Catalog
576 kes Purge original job migrated if the migration terminates normally.
577 kes Cleanup purging of files/jobs so that it is done only in a
579 kes Add new VOLMGMT message class.
580 kes Add Catalog message destination (user conf code remains to be written).
582 kes Modify read_record and friends to properly deal with migration
584 kes Update debug code in read_record.
586 ======================= Warning ==========================
587 Separate read and write storage in Jobs in the Director. This
588 is a major rewrite of some of the low level code and hence has
589 a high probability of introducing bugs.
590 ==========================================================
592 kes Move the job init code up to *before* the job is put into
593 the job queue (resource allocation queue). This permits the
594 job to establish whether it will read or write or do both.
595 kes Add name() methods to all the resource classes.
596 kes Implement separate read and write storage resource
597 allocation/deallocation in jobq.c
599 ======================= Warning ==========================
600 Implemented new method of getting the default Storage from the Media
601 record rather than from the MediaType for restore. As a fall
602 back, if no Storage is defined, use the MediaType. This
603 eliminates most all prompts if there are multiple MediaTypes
604 used. This is an important and fundamental change.
605 ==========================================================
607 kes Add more detail (Storage, Device) to list of volumes printed
609 kes More code in migrate. In particular start multiple jobs if
611 kes Probably overkill, but ensure that the bsr is unique even within a
613 kes Rework bsys.c drop() so that it now should work as expected.
614 kes Update a bunch of old copyrights -kes particularly in .h files.
615 kes Remove src/lib/bshm.c/h
619 ======================= Warning ==========================
620 All hash codes in the database are now kept in world
621 compatible base64 format (no = filling). This means that
622 all FileSets will be updated and if you are running
623 verify jobs, you must do an InitCatalog.
624 Authentication uses the new algorithm, but should be
625 backward compatible with 1.38.x
626 ===========================================================
628 kes Modify the authentication routines so that the 1.39.15 Director
629 always runs with the compatible binary to base64 code (same as
630 the rest of the world). It will however detect if an SD or
631 FD is running the old code and if that is the case, will use
632 the old algorithm for authentication. However, all consoles must
633 use the compatible algorithm, and all data entered into the database
634 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
635 use the compatible algorithm.
636 kes Rename the cram_md5 routine names to be slightly more appropriate
637 to what they are doing (challenge and respond).
638 kes Robert committed his #ifdef and header cleanup.
640 kes Fix a compiler warning in files/backup.c
641 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
643 kes Robert committed his low impact changes.
644 kes I removed a size_t from the jcr.h definition.
645 kes Update the tape regression scripts (still to be tested).
646 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
647 kes Require done or quit to exit from in memory tree restore.
649 kes Write install/uninstall of new manpages. There are now a
650 pile of man pages. Some of which need a lot of work.
652 ======================= Warning ==========================
653 The --mandir ./configure option now points to the top level
654 man directory. The man files will be installed under
655 mandir/man8 and mandir/man1 as appropriate.
656 ==========================================================
658 kes Add complete text of GPL to LICENSE.
659 kes Implement job report that indicates where Storage and Pool
660 came from -kes with overrides and Pool storage and NextPool,
661 it is all very complicated.
662 kes Create a few common subroutines for backup.c and migrate.c
663 kes Eliminate warning messages from tray-monitor.c
665 kes Apply fix for scheduler for missing unlock_jobs().
666 kes Clean out autoconf caches before rebuilding configure
667 kes Fix the FreeBSD pthreads lib define updated by Dan.
668 kes Add missing semicolon in src/console/console.c
669 kes Add Robert's enhanced version of build-win32-cross-tools
670 as well as his patch file.
671 kes Note, the new gcc options are likely to break building of
672 wx-console or the tray-monitor ...
674 kes Implement Robert's suggestion to suppress printing compile lines.
675 kes Detect GCC correctly (I hope)
676 kes If using GCC (actually g++) add the following compiler flags
677 -fno-strict-aliasing -fno-exceptions -fno-rtti
679 ===================== Warning =============================
680 Turn on new bsnprintf() code. This could cause print output
682 ===========================================================
684 kes Fix crypto when not using openssl. I previously overlooked this.
685 kes Eliminate crypto type punning problems by eliminating void * and
686 using uint8_t * instead.
687 kes Harden authentication failure in FD by single threading errors
688 and forcing a 6 second wait.
690 ===================== Warning =============================
691 Removed 'Accept Any Volume' directive.
692 ===========================================================
694 kes Major cleanup and simplification of regress using shell functions
695 (more tests to be converted to new format)
696 kes Add detection of 64 bit Irix as indicated by user.
697 kes Increment catalog database id from 9 to 10.
698 kes Add a few of the new database fields to the various C++
700 kes Implement code to fill in the most important new fields (e.g.
702 kes Ensure that most of the new fields are in create/get/insert/update.
703 More work to be done.
705 kes Update some very old licenses in src/cats.
706 kes Modify the database format for handling Migration jobs:
707 Add PriorJobId, RealEndTime to Job table
709 Remove Stripe from JobMedia record (not used, wasting space)
710 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
711 Add Cost to Location table.
712 kes Delete mac_record subroutines.
713 kes Add new table values to create/update/get routines as appropriate.
714 kes Update the update_tables and make_tables scripts.
715 kes Make a first cut in using a union where multiple pointers (actually
716 pointers to pointers) are stored.
717 kes Make some changes to base64.c suggested by Robert and others and add
718 a small amount of documentation.
719 kes Add some changes suggested by Peter for Solaris (bregex...)
720 kes Make runscript.h always built because it needs to be pulled into
721 more places. In particular its RES was left out of a union.
722 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
723 This makes it slightly easier to detect uninitialized variables.
725 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
726 sometimes creates install problems.
727 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
728 Nelson's code. More to do.
729 kes Convert a few store_bit to store_bool in filed_conf.c.
730 kes DVD tweak to block.c as supplied by Uwe Muessel.
732 kes Modify configure.in to check for typeof().
733 kes In findlib/attribs.c use typeof instead of templates if possible.
735 kes Implement partial error messages for src/filed/acl.c
736 kes Fix return code to fail when doing update barcodes and
737 Pool resource is not found. This previously caused Volumes
738 to be labeled as cleaning tapes.
739 kes Small updates to projects.
741 kes Add Eric Bollengier patch for new RunScript directive. It breaks
742 compatibility between dird and fd.
744 kes Prevent DVD code from rewriting label if the device cannot be
746 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
747 fix Debian build bug.
748 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
749 kes Integrate manpages contributed by Jose Luis.
750 kes Update projects file.
751 kes Add manpages Makefile.in to configure.in
752 kes Remove installation of bacula.8 in scripts directory.
754 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
756 O_NOATIME is a open() flag which makes it possible to read a file without
757 updating the inode atime (and also without the inode ctime update which
758 happens if you try to set the atime back to its previous value). It also
759 prevents a race condition when two programs are reading the same file, but
760 only one does not want to change the atime. It's most useful for backup
761 programs and file integrity checkers (and bacula can fit on both
764 Recent versions of the Linux kernel and glibc have support for it (the
765 glibc support being mostly copying the O_NOATIME definition to
766 bits/fcntl.h). If there's no support for it on the kernel, trying to use
767 it does nothing (since the kernel ignores unknown flags).
769 If the kernel has support for it, trying to use it either works, fails
770 silently (mostly in remote filesystems), or returns errno=EPERM (if you
771 are not either the owner of the file or root). A simple way to prevent the
772 failure is to open the file without the flag and set it later with
773 fcntl(F_SETFL), ignoring any EPERM errors.
774 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
775 of restarted jobs to complete (due to a destroyed pthreads conditional
776 variable used by the message thread).
777 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
779 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
780 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
781 colons in query.sql file.
782 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
783 not to create orphans.
784 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
785 in restore long listing.
786 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
787 of incorrect MarkedId.
788 kes Apply patch from adioso bug #616 to correct text in manual (replace
789 Director with File daemon).
790 kes Rework a few of the zlib changes so that they build properly.
793 kes Move DIR 'run' command to SD before starting the message thread
794 as suggested by Cristopher Hull to avoid a race deadlock from
795 two threads using the bsock structure.
796 kes Modify LICENSE to correct some problems pointed out by Debian.
798 kes Correct EOF with no \n lex.c problem.
799 kes Tweak compat.h compat.cpp and merge with apcupsd
800 kes Add additional INFO messages if autochanger cannot be used.
803 kes Simplify Win32 Makefile
804 kes Correct count of buffers/bytes used by smartall.c
805 kes Updated compat.h after porting apcupsd to MinGW.
807 kes Work on getting wx-console building on MinGW. wxWidgets now builds
808 started adding Makefile ...
809 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
811 kes Reloading a bad configuration file doesn't kill director any more.
812 Thanks to fix from Eric Bollengier.
814 kes Fix problem of accents with new Win32 code.
815 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
816 works in the MinGW build with the exception that there
817 is a problem with accented characters -kes i.e. there is
818 some mapping problem with wide characters.
819 kes The code no longer compiles with Microsoft VC++.
821 kes Start implementing Christopher's St.Bernard code.
822 kes Add Christopher's mods for opening files.
823 kes Strip \r \n from Win32 error messages (Christopher)
824 kes Add more info about Win32 system if unknown (Christopher)
825 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
826 kes Fix a number of incorrect strings marked for translation, when
827 they should not be (e.g. commands).
828 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
829 Patches supplied by user in bugs #608 and #599.
830 kes Use most recent of st_ctime and st_mtime in restore tree DIR
831 listing. This fixes some problems with Win32 printing incorrect
833 kes Correct the clock shift comm time calculation between the DIR
834 and the FD. It was added rather than subtracted.
835 kes Strip all backslashes in filenames to be restored on Win32
836 machines -kes the names should all be in Unix format, and if
837 there are any backslashes it is most likely due to an improper
838 FileSet definition, and the files will not otherwise be
840 kes Remove lib/regex.c (replaced by bregex.c).
841 kes Delete src/win32/License.txt
842 kes Modify installer to install LICENSE
844 kes Fix bug in build-win32-cross-tools script reported by Howard
845 kes Implement cross compiled bconsole
847 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
848 kes Write first cut of README.mingw32
849 kes Add back ua_label barcode fix from Rufolf Cejka.
850 kes Integrate the majority of the Mingw cross-tools submission
851 made by Howard Thomson. Everything compiles, with zlib, openssl,
852 and VSS turned off. Linking needs a pthreads library ...
854 kes Add 'Dir Status' button to the gnome console.
855 kes More work on migration.
856 kes Restore non-compatible base64 coding to permit compatibility.
857 kes Display heap stats in Storage daemon without debug level.
859 kes Integrate most of the MinGW changes -kes more to do.
861 kes Implement using pg_config for finding PostgreSQL files.
862 Fixes bug #600. Patch supplied by user.
863 kes Remove -t option from mktemp in mtx_changer.in and use
864 working directory. Fixes bug #578.
865 kes Update job start time after the any run before job so that
866 files created by the script are only backed up once. Fixes
868 kes Strip trailing newline only from filenames entered in
869 the restore command when reading a file. This permits
870 the user to enter filenames with trailing spaces. Fixes
871 bug #549. The user supplied a patch that I modified slightly.
872 kes Use the most recent time (st_mtime, st_ctime) in the dir
873 command in restore. This gives the user a better idea of what
874 the newest file really is. This fixes bug #574. The fix
875 was suggested by the user.
876 kes Implement a compatible version of base64. This permits external
877 programs to duplicate Bacula's base64 algorithm using standard
878 routines. This fixes bugs #296, and 565. Patch submitted by
880 ================= Note ========================
881 Previous Signatures stored in the database are no longer
882 compatible with this. The main downside is for Verify jobs,
883 and doing an InitCatalog run will fix the problem. Also, the
884 authentication between the deamons is changed, so all daemons
885 must be simultaneously upgraded.
886 ==============================================
887 If you don't like this fix, set:
888 const bool compatible = true;
890 const bool compatible = false;
893 kes Ensure that DB signature is never NULL.
894 kes Ensure that DB table names are not translated.
895 kes Fix scheduler to handle time skew (eg daylight savings).
896 kes Fix scheduler to use lock_jobs() to avoid most problems
897 with reload. Window is now milliseconds.
899 kes Apply patch from Christopher Hull
900 kes Allow multiple connections to database with different
902 kes Invalidate the scheduler when doing a reload. Fixes seg
903 fault, but still 60 second window.
904 kes Additional info in Reschedule message.
905 kes Use set_jcr_job_status() everywhere to prevent loss of
907 kes Display peer IP in FD if error from connecting DIR.
908 kes Don't increment file count for DIRBEGIN.
909 kes Replace illegal characters in Win32 filename by _.
910 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
911 kes Hash hard link filenames rather than linked list.
912 kes Fix for security failure in chdir on Win32.
913 kes Add CreateDirectoryA/W win32 API entry points.
914 kes Add /silent option to Win32 FD for Install/Remove service.
915 kes Always print Heap statistics in FD.
917 kes Remove the -f option from the chown in Makefile.in for more
919 kes Change setting the group in Makefile.in to use chgrp for
921 kes Implement a write_store and read_store to replace
922 dirstore in reserve.c
923 kes Implement a Bacula read/write lock for Python rather
924 than using the Python lock to avoid recursive problems.
925 kes Correct the uninstall directory names in filed/Makefile.in
926 as reported by a user.
928 kes Correct some problems with database creation (new tables).
929 kes Replace a bunch of old 0x%x by %p.
930 kes Get first cut of Migration with Job selection working.
932 kes Change store_bit() to store_bool() for the Spooling in
933 dird_conf.c -kes bug reported by Robert Nelson.
935 kes Correct Makefile bug found by Dan Langille.
937 kes Correct Makefile for Solaris /bin/sh
938 kes Correct mtx-changer.in for Solaris /bin/sh
939 kes Abort if a conf resource does not have a Name =
941 kes Change the name of the regex program to bregex.
942 kes Add the bwild program to the tools directory. It is similar
943 to the bregex program.
944 kes Implement create bregex.h and bregex.c in src/lib from the
945 Python regexp program.
946 kes Use the new bregex.c to implement Regex expressions on Win32.
948 kes More work on migration.
949 kes Implement wild program in tools directory for testing
950 wild-cards. Almost identical to the regex program.
951 kes Up port VSS single thread locking code.
952 kes Replace N_(..) by NT_(...) to inhibit translation of
954 kes Modify Makefile to change the permissions on Working Directory
955 to 770 if the directory is created.
956 kes Do not fail the Makefile if changing the permissions or
957 owner/group on WorkingDir fails.
958 kes Remove early selection of Scratch Volumes in the recycling
960 kes Correct the old recycling algorithm so that Scratch Volumes
961 are selected when looking for a Volume in the changer.
962 kes Correct a typo in the Verify SQL reported by Joe Park.
964 kes Remove automatic case folding on Windows FDs. You must
965 explictly use the 'Ignore Case = yes' option.
966 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
967 scratch volume in an Autochanger early in the 'recycling'
970 kes Make weof() and clrerror() methods of class DEVICE.
972 kes Tweak license to include Microsoft restrictions.
973 kes Move mysql.reconnect to after real_connect(). Thanks to
974 Frank Sweetser for the patch.
975 kes Disallow a backslash in a File = directive (Windows junk)
976 unless the string is quoted.
977 kes Apply Eric's patch to ua_label.c so that daemon protocol
979 kes Add NT_ definition for strings that should not be translated.
980 kes Apply NT_() to ua_label.c
981 kes Remove timed wait for VSS on Win2K3 as it is not yet
983 kes Correct bacula.in script to reference bacula-ctl-xx in the
984 sysconfig directory rather than the bin directory.
986 kes Fix a long standing bug in the bacula start/stop scripts.
987 kes Attempt to add the new bacula-ctl-* files to the rpm.
988 kes Switch to using typeof() for list traversing to avoid
989 as many FC5 g++ compiler warnings as possible.
991 kes Split the bacula start/start script into four files:
992 bacula -kes starts and stops calling other scripts
993 bacula-ctl-dir -kes starts/stops the director
994 bacula-ctl-fd -kes starts/stops the File daemon
995 bacula-ctl-sd -kes starts/stops the Storage daemon
997 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
998 kes Correct editing of JobId from int to int64 in fd_cmds.c
999 kes Eliminate FileSet name race with bash_spaces() and multiple
1000 threads by bashing in a local.
1001 kes Fix error return from 'use storage' to print a correct error
1002 message rather than nothing.
1003 kes Correct false re-read last block error message when two jobs
1004 are simultaneously writing at the end of a tape.
1005 kes Simplify exit conditions in the reserve.c code to avoid
1006 possible non-release of reservation_lock().
1007 kes Suffle lock order in reserve to avoid deadlock between
1008 reservation lock and device mutex.
1010 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1011 tracking this down for me !!!! as it broke the Win32 build.
1013 kes Integrate addition of line count limitation to bsmtp -l from
1014 Sebastian Stark <stark at tuebingen.mpg.de>
1016 kes Implement regex test program in tools directory.
1017 kes Attempt to fix time problem with bsmtp with foreign langs.
1018 kes Add strip_trailing_newline() submitted by user.
1019 kes Implement regex matching in migrate.c
1021 kes Fix bug #537 to allow arbitrary time to mount a volume for
1022 restore, if polling is turned on.
1023 kes If dir_user or dir-group is specified in ./configure apply it to
1024 the working-dir. Fixes bug #533.
1025 kes If rescheduling a job cancel the previous incarnation with the SD.
1026 Fixes bugs #566 and 557.
1027 kes Fix bug #567 do_message() definition type conflict.
1030 kes Add more jcr methods and make mutex and use_count private.
1031 kes Create lock/unlock methods for jcr.
1032 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1033 records to get to seek position.
1034 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1035 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1036 terminates correctly by doing pthread_kill(). Do not destroy
1037 SD cond wait variable between executions of the job. Use local
1038 mutex for cond variable to avoid blocking jcr chain. Fix poor
1039 use of jcr use count in jobq.c for restarted jobs.
1040 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1041 lib/jcr.c -kes prevents locking the jcr chaing.
1042 kes Apply patch from bug #564, which corrects listing volumes with
1043 multiple autochangers. Apply same fix to next volume list.
1044 kes Fix bug #562 where restore bootstrap file is not unique.
1045 kes More details in implementing David's migration syntax proposal.
1046 kes Save and restore dcr when swapping drives so that if we have
1047 a write dcr it is not lost.
1048 kes Use new routine lock_reservations() to lock the reservations
1049 system, and call it while looking for a volume in askdir.c.
1050 This could possibly fix bug #543.
1051 kes Stop SD command loop if job is canceled.
1054 kes Remove old code from findlib/create_file.c
1055 kes Rename mac.c migrate.c
1056 kes Add user friendly display of VolBytes in job report.
1057 kes Rename target... to previous... to make it a bit easier to
1059 kes Add selection type and selection pattern to Migration (idea
1060 given by David Boyes).
1063 kes The po files should now be current.
1064 kes Fix new sql_use_result() code to properly release the
1065 buffers in all cases.
1066 kes Use the keyword ujobid to mean the unique job id; job or jobname
1067 to mean the Job name given on the Name directive, and jobid to
1068 be the numeric (non-unique) job id.
1069 kes Allow listing by any of the above.
1070 kes Add the user friendly job report code for reporting job elapsed time
1071 and rates with suffexes from John Kodis <kodis at comcast.net>.
1072 kes Add Priority and JobLevel as Python settable items.
1073 kes Use TEMPORARY table creation where the table is created by
1075 kes Add new code submitted by Eric for waiting on specific jobid.
1076 kes Add ACL checking for the dot commands.
1077 kes Fix restore of writable FIFOs.
1078 kes Fix a bug in bpipe where the string was freed too early.
1080 kes Modify the Python class examples to inherit object -kes new way
1081 of defining classes. Patch from Felix Schwarz.
1082 kes Implement jobuid to replace old usage of job in keywords as
1083 suggested by Eric Bollengier.
1084 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1085 wait (wait for all jobs to stop)
1087 wait jobuid=unique id
1089 kes Implement write variables for Python to set Priority (anytime), and
1090 Job Level, only during JobInit event.
1092 kes Fix the block listing bug pointed out by Arno.
1093 kes Update the po files at Eric's request.
1095 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1096 accept time qualifiers.
1097 kes Make catalog respect ACL.
1098 kes Add recycle count to Media record.
1100 Changes to 1.39.6-beta1 24Feb04
1102 kes Add Rudolf Cejka's new rc-chio-changer.
1103 kes Implement pulling Volume from Scratch Pool if the
1104 Volume is in the autochanger.
1105 kes Implement additional command arguments for update Volume.
1109 kes Back port changes to 1.38.5
1110 kes Fix recycle SQL for StorageId.
1111 kes Fix misplaced quote in mtx-changer script.
1113 kes Note. Your database must be updated, or you must create
1114 a new database. I have not yet incremented the database level.
1115 kes Add Location table.
1116 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1118 kes Implement create/get mac record in database for adding extended
1119 Migration data to the job record.
1120 kes Add new MAC table to update/make database scripts.
1121 kes Return Storage name used when getting VolumeNames for a job.
1122 kes Change bsr file keyword Storage to Device, which is more accurate.
1123 kes Ensure that Mac records are pruned/purged.
1124 kes Tweak SD tools to deal with changing media type.
1125 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1126 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1127 that the subroutine can switch devices, and hence dcrs.
1128 kes Modify the multiple MediaType read code to re-use the same
1129 dcr when switching devices. This makes the code much more
1131 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1132 from a table for restore.
1133 kes Add Storage name to VolParams, but it really should be Device.
1135 kes Add disk-changer to scripts directory + configure/Makefile
1136 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1137 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1138 kes Implement new store_bool that stores in a bool.
1139 kes Add true/false to yes/no conf directives.
1140 kes Make first cut at changing appropriate store_yesno to store_bool.
1141 kes Complete implementation of Pool storage devices.
1142 kes Move starting clones to job.c
1143 kes Move create_restore_bootstrap_file() to job.c
1144 kes Make copy_storage() more general to be able to handle
1146 kes Cleanup a lot of migration code for manual running, including
1148 kes Move getting a scratch Volume into a subroutine.
1149 kes Make all places a Volume that is added to a pool to
1151 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1152 kes Fix segfault in restore command when no value specified.
1153 kes Start adding code to handle multiple MediaTypes in restore.
1154 kes Eliminate race condition in getting Volume name for
1155 two drive autochanger.
1156 kes More debug code in autochanger.
1157 kes Add storage keyword to bootstrap file, add parsing.
1158 kes Move slot in bsr file into Volume record as there will be
1159 a different slot for each Volume.
1160 kes Create reserve.h
1162 kes Implement Pool storage overrides.
1164 kes Implement first cut of Migration.
1165 kes Implement mysql_use_result() from patch by Karl Hakimian.
1166 This reduces significantly the memory consumption during
1167 the restore tree building, and hence runs faster too.
1168 kes Implement StorageId patch supplied by user (reggie) in bug
1169 #536. This should permit Bacula to work correctly with two
1171 kes Implement Job listing variations suggested by a user.
1172 kes Move updating bootstrap code in backup.c to subroutine
1173 update_bootstrap_file().
1174 kes Add new job status elapsed time and bytes written user
1175 friendly job report output patch sent by John Kodis
1176 <kodis at comcast.ne>.
1177 kes Implement a storage list in Pools.
1178 kes Separate out setup_job() code from run_job().
1179 kes Get migration working -kes lots of changes in mac.c in both
1181 kes Apply patch from user (Eric Bollengier I think) that fixes a
1182 DIR crash when no arguments are supplied to a dot command.
1183 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1184 kes Fix command arg name->volume in label command of gnome-console.
1185 kes Fix SD acquire.c to release correct DCR by explicitly testing
1186 on the dcr address rather than trying to devine if it is a read
1187 or write dcr. This failed in error conditions when the device was
1191 kes Apply user supplied patch for more readable rate output
1193 kes Continue implementing migration.
1194 kes Implement support for removable filesystems in SD.
1195 kes Ensure that btraceback scripts can be read by anyone.
1196 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1197 kes Correct bug where canceling restore before the FD contacts
1198 the SD causes the drive to be left in read mode.
1199 kes Move ofline_or_rewind into DEVICE::close().
1200 kes Eliminate close_device.
1201 kes Convert several dev subroutines to methods (e.g. bsf,
1203 kes Eliminate force_close_device().
1204 kes Implement Device Type directive in Device resource that
1205 can have values File, Tape, Fifo, DVD, or Prog.
1206 kes Add has_cap() method to Device.
1209 kes Add patch from bug #527 to allow RedHat user to specify
1210 options/user/group for starting each daemon in
1211 /etc/sysconf/bacula.
1213 kes Add two new queries to query.sql provided by Arno. One
1214 list volumes known to the Storage device, and the other
1215 lists volumes possibly needing replacement (error, ...).
1217 kes Add periodic (every 24 hours) garbage collection of memory
1218 pool by releasing free buffers.
1220 kes Correct bug counting sized (for display only) in smartall.c
1221 kes Print FD mempool stats if debug > 0 rather than 5.
1223 kes Make db_lock() mutex error fail the job rather than abort
1224 Bacula. Canceling the job caused the mutex to fail.
1225 kes Correct bug in alist.c that re-allocated the list if the
1226 number of items goes to zero.
1227 kes Move the reservation system thread locking to the top level
1228 so that one job at a time tries all possible drives before
1230 kes Implement a reservation 'fail' message queue that is built
1231 and destroyed on each pass through the reservation system.
1232 These messages are displayed in a 'Jobs waiting to reserve
1233 a drive' list during a 'status storage='. Note, multiple
1234 messages will generally print for each JobId because they
1235 represent the different problems with either the same drive
1236 or different drives. If this output proves too confusing
1237 of voluminous, I will display it only when debug level 1
1238 or greater is enabled in the SD.
1240 kes Add enable/disable job=<job-name>. This command prevents
1241 the specified job from being scheduled. Even when disabled,
1242 the job can be manually started from the console.
1243 kes During 'update slots' clear all InChanger flags where the
1244 StorageId is zero (old Media records).
1246 Beta release 1.38.4:
1248 kes Fix autochanger code to strip leading spaces from returned
1249 slots number. Remove bc from chio-changer.
1250 kes Back port a bit of 1.39 crypto code to reduce diffs.
1251 kes Fix first call to autochanger that missed close()ing the
1252 drive. Put close() just before each run_program(). Fixes
1255 kes Add PoolId to Job record when updating it at job start time.
1257 kes Pull in more code from 1.39 so that there are fewer file
1258 differences (the new ua_dotcmds.c, base64.h, crypto.h
1259 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1260 util.c. Aside from ua_dotcmds.c these are mostly crypto
1262 kes Implement new method of walking the jcr chain. The
1263 incr/dec of the use_count is done within the walking
1264 routines. This should prevent a jcr from being freed
1265 from under the walk routines.
1270 kes Start implementing Verify list output.
1271 kes Move the suitable_drive flag to a better place to prevent
1272 premature termination of the reservation if all drives
1273 are busy -kes should fix Arno's diff/inc pool failures.
1275 kes Add mutex to single thread VSS code in Win32.
1277 kes Simplify code in askdir.c that waits for creating an appendable
1278 volume so that it can handle multiple returns from the wait
1280 kes Modify the wait code to permit multiple returns.
1281 kes Return a zero when 'autochanger drives' is called and
1282 it is not an autochanger.
1283 kes Make rewind_dev() a method taking a DCR as an argument.
1284 This permits closing and reopening the drive if the
1285 rewind fails as happens if the drive was loaded while the
1286 file descriptor was open. This refreshes the file descriptor.
1287 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1288 if the device is open or not. This should eliminate
1290 kes Return error if reserve cannot find at least one suitable device.
1291 kes Make wait_for_sysop() return correct state information.
1292 kes Fix Win32 state file problem. write was not using compat
1293 code. This should fix bug #500.
1295 kes Modify gui on command to set only GUI mode and not batch.
1296 kes Modify .messages command to always print messages regardless
1298 kes If GUI mode is on, suppress automatic printing of
1300 kes Delete old bnet packet code.
1301 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1302 wx-console. -kes not implemented because bconsole must be updated.
1303 kes Modify restore command in wx-console to set gui on and to use
1304 only .messages instead of messages. Hopefully this fixes bug
1306 kes Fix seg fault in exit of acquire when canceling a job --
1307 reported by Wolfgang Denk
1308 kes Pull in latest reservation system changes from 1.38
1309 kes Make .messages command always print messages regardless
1310 of the automessages flag.
1312 kes Fix seg fault if user labels a drive directory bug #513
1313 kes Remove quotes around Version as it breaks things.
1315 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1316 kes Apply sparse code fix for raw drives and fifos. Bug 506
1317 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1319 kes Correct reservation system to do a last ditch try
1320 for any mounted volume, then anyone anywhere.
1321 kes Add quotes around table Version because of
1322 error in MySQL 4.1.15 -kes bug report submitted.
1323 kes Correct some minor problems with btape in the fill
1325 kes Updates to ssh-tunnel from Joshua Kugler.
1326 kes Added a report.pl program from Jonas Bjorklund.
1327 kes Simplify the O_NONBLOCK open() code for tape drives,
1328 and always open nonblocking.
1329 kes Do not wait for open() if EIO returned (shouldn't happen).
1330 kes Eliminate 3 argument to tape open().
1331 kes Correct the slot # edited in the 3995 Bad autochanger unload
1333 kes With -S on bscan (show progress) do not divide by zero.
1335 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1336 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1337 kes Remove unused code in wait_for_device.
1338 kes Make wait_for_device() always return after 60 seconds of wait.
1342 kes Add stubs for non-crypto build.
1344 kes Use localhost if no network configured
1346 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1347 kes Remove debug print.
1348 kes Add bail_out in error during state file reading.
1350 kes Merge changes made to 1.38.3 into HEAD
1351 kes Add stubs for pygtk-console code
1352 kes Create Makefile.in for pygtk-console code
1354 kes Merge updates into 1.38 branch
1355 kes Update specs to include mysql4 define.
1356 kes Fix when attributes are sent, must be after binit().
1357 kes Stop read_record() if status not ok in second loop.
1358 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1359 and partial records in read_record(). This allows bscan
1360 to get FileIndex at EOT correct.
1361 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1363 kes Fix Win32 built to work with new crypto code.
1364 kes Apply patch supplied by user (slightly modified) to fix
1365 correct detection of holes in block devices and FIFOs.
1367 kes Apply patch supplied by user (slightly modified)
1368 to fix SD hang with multiple pools and bad client
1369 IP. Fixes bug # 508.
1371 kes Add nagios plugin to the examples directory. Submitted by
1373 kes Remove warning message about multiple saves of hardlinked files
1374 from find_one.c as it can generate too many warning messages.
1375 kes Modify most restore error messages to be queued so that they
1376 appear at the end of the job rather than mixted with the restore
1377 listing where they could be 'lost'.
1379 kes Reset timeout values before select() per patch from
1380 Frank Sweetser for problems with non-blocking sockets.
1381 kes Unlink the state file if either reading or writing it gets
1382 errors. Hopefully this will fix Win32 exit problems.
1383 kes Add sanity check in append.c to ensure that dcr is not NULL.
1384 This can happen if multiple drive autochanger SCSI control
1385 channel and drive indicies do not correspond.
1387 kes Get next volume from Scratch pool before creating a volume.
1388 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1389 kes Remove argument from create_bacula_database for SQLite as it
1391 kes Add back index code so that two drive autochangers can get
1393 kes Change a bunch of debug levels to aid debugging autochangers.
1394 kes Fix reservation so that mutexes are properly applied.
1395 kes Rework reservation algorithm so that two drives can be used
1398 kes Landon merged his data encription changes into the HEAD
1399 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1400 If this patch is applied, the number of days can be specified with
1401 'list nextvol days=xx'
1403 'status dir days=xx'
1404 My use case is to be able to preview the next scheduled job (and the
1405 next tape to be used) on fridays if there are no scheduled jobs during
1409 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1410 kes Fix malformatted bnet error message that caused seg fault
1412 kes Applied user patch to improve README.vc8 in src/win32.
1414 kes Add Migrate, Copy, Archive Job types (some where there)
1415 kes Correct some more editing of JobId's (for 64 bit compatibility).
1416 kes Ensure that StorageId is stored in Media record when ever possible.
1417 kes Add Migration Job to Job.
1418 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1419 Next Pool to Pool resource.
1420 kes Add more code to mac.c (migration archive copy).
1421 kes Change Start Storage daemon job to require read and write storage
1423 kes Pass read storage data to SD as well as write storage data.
1424 kes Remove old code from winservice.cpp
1425 kes Break on error in scan.
1426 kes Fix typo in signal.c
1427 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1428 kes Cleanup how find_device() works.
1429 kes Add read output to Status in SD.
1432 kes Add red-black btree routines
1434 kes Remove abs() in bfile.c so that it compiles on Solaris.
1437 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1438 kes Fix bnet-server bug found on OpenBSD. Bug #486
1439 kes Fix cancel failure bug. Bug #481
1440 kes Fix failure when Pool name has spaces. Bug #487
1441 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1442 kes Fix a couple of free()s in src/filed/acl.c
1443 kes Fix memory overrun in bfile.c in building OS X resource
1444 fork filename. Bug #489
1445 kes Add Pool name to SD status output.
1447 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1448 kes Make sure to set storage before trying to set drive.
1449 kes Add bacula_mail_summary.sh to examples directory. It makes
1450 a single email summary of any number of jobs. Submitted
1452 kes Make sure when we do a mount to unblock the device even
1453 if the drive could not be opened.
1455 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1456 and correct a few minor problems to make it build on Linux.
1458 kes Remove delete of CVS from all Makefiles
1459 kes Fix seg fault when clicking on Add button in wx-console
1460 restore panel. Bug #470.
1461 kes Fix copyright date and URL typo -kes bug #468.
1462 kes Change autostart install for FreeBSD to look for rc.conf
1463 rather than rc.local as suggested fix for bug #466.
1464 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1465 grant on status. Bug #465
1466 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1467 update script. Bug #464
1468 kes Tweak #ifdefing a bit in new Win32 stream code.
1469 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1470 kes Add documentation of performance #defines
projects / bacula / bacula / blob