1 Technical notes on version 1.39
5 kes Initialize msg_type to M_INFO in migration. Pointed out by
7 kes Add some fflush() statements for debug output. This should not
8 really be necessary and defeats buffering but users continue
11 kes More copyright changes.
12 kes Make sure we don't detach from the despool read device since it
13 is a temporary structure where the condition variables are not
14 initialized. Bug #711.
16 kes Add Bacula version+date to Client record. This is a very minor
17 security problem in that passing the version facilitates a hacker's
18 life, but it will make support easier.
19 kes Implement fixes to make disk seeking work. Currently turned
20 off in version.h pending reserch on what problems it will cause
21 because of the previous bsnprinf() sign extension bug.
23 kes Add Landon's refactor of restore Feature request to the
25 kes Tweak debug levels and messages for examining the disk
28 kes Cleanup some of the error termination code in migration.
29 kes Separate read/write source strings to keep track of where
30 storage devices are used in a job.
31 kes Implement a new method of keeping track of which storage
32 device is used in a Job. USTORE keeps both a pointer to the
33 resource and to the source string.
34 kes Modify all code to use new storage set subroutines in job.c
35 kes Modify migrate.c so that the definitive selection of the storage
36 resource is done in the do_migration_init() routine prior to
37 the job going into the job queue. This permits accurate
38 deadlock detection (same read and write storage resource).
39 kes Remove bfill from btape (I think it was a left over stub).
41 kes Make sure that the storage for a job is pulled first from
42 the Pool and if not from the Job.
43 kes Ensure that either the Pool or the Job specifies a Storage
46 kes Start applying new FSFE copyright.
48 kes Add additional error messages in acquiring a drive for read.
49 kes Make WritePartAfterJob the default so that the last DVD part
50 always gets written to the DVD by default.
51 kes Add additional error messages in migration.
52 kes Suppress redundant error messages in migration (possibly more to do).
53 kes Apply Martin's fix (updated to 1.39) that takes into account
54 run storage overrides in the Director status display.
55 kes Implement, but turn off the submitted code that sets the EOT
56 model on FreeBSD machines. Turning on this code is too risky at
57 this point in the development.
59 kes Implement unique dbid routine for migration to prevent the same
60 JobId from being migrated twice. This should fix bug #709.
62 kes Apply Jaime Ventura's 'mail on success' patch.
63 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
64 if memory usage gets too big.
65 kes Tweak migration to ensure that read/write devices are different.
67 kes Create an AUTHORS file to list Bacula contributors.
68 kes Add Richard Stallman's four GPL freedoms to LICENSE
69 kes Require the conf file to have a valid NextPool for writing the
72 ebl Enable RecycleCount in catalog.
73 ebl Fix "echo python | bconsole" segfault
75 kes Implement code to pass the MediaId to the SD. The SD then uses
76 this MediaId when creating JobMedia records. This fixes a bug
77 with Migration where the MediaId got set to the second Volume
78 read rather than the write Volume. Possibly (unlikely) fixes
80 kes Remove NextPool from Job resource.
81 kes Edit a few numbers in the restore dialog with commas.
82 kes Note, the DIR<->SD protocol has changed.
84 kes Replace () by {} in configure.in for proper HP configuration.
85 kes Shorten some lines over 80 characters in filed/backup.c
86 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
88 Version 1.39.28 released:
90 kes Change error message 'illegal' to 'invalid' -- bug #707
91 kes Add rather primitive device resource deadlock detection in
92 the job queue handler. It detects the same read and write device
93 for migration and cancels the job.
94 kes Start adding a unique_dbid_hander() routine in migration to avoid
95 duplicate mediaids and duplicate jobids.
96 kes Add patch from bug #708 to permit relative paths such as ../xxx
97 in the restore tree routine.
98 kes Add Eric Bollengier's patch to reduce locking time in the SD after
99 despooling, and thus many jobs finish faster.
100 kes Correct locking order of reservations lock and device mutex in
101 reserve.c -- this should correct Arno's deadlock that occurred
102 when doing mount/unmount at the same time a job is reserving a
105 rbn Fixed problems with encryption when combined with compression
106 or sparse files. Unfortunately this means that all previous
107 encrypted backups can't be restored.
108 rbn Fixed problem in bfgets with Windows and Mac end of lines.
109 rbn Fixed bug in Windows version of close_bpipe() that cause programs
110 like bsmtp() to hang waiting for the pipe to be closed. Fixed
111 binary file type problems in open_bpipe().
112 rbn Fixed a number of bugs in the mysql DB scripts.
114 ebl Fix broken runscript on director. (RunBefore, RunAfter)
115 ebl Use M_ERROR instead of M_FATAL in runscript.c
117 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
118 rbn Ignore UTF-8 marker at the start of .conf files.
119 rbn Add stab2cv to 3rd party dependencies. This is a utility I
120 wrote that is licensed under the GPL and available on SourceForge.
121 It converts the stab debugging info generated by gcc into Codeview
122 format. Currently it just translates function names to global
123 symbols. This is sufficient to get reasonable stack traces from
124 Dr Watson and to look at minidumps.
125 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
126 rbn Enable Windows XP look and feel for the tray icons and wx-console.
127 rbn Add Windows specific FileSet example to bacula-dir.conf.
128 rbn Reorganize Start menu so that documentation and configuration are
131 rbn Change daemons and utilities so that if -c is omitted from the
132 command line AND there is no configuration file in the current
133 directory then the 'standard' configuration file (eg
134 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
135 doesn't contain any path separators AND there is no configuration
136 file by that name in the current directory then the 'standard'
137 configuration file directory will be searched for a file by that
139 rbn Fixed restore on Windows so that backslashes as path separators works.
140 rbn Add missing query.sql file to Windows installer.
141 rbn Fixed Windows versions of catalog backup scripts.
143 kes Fix optional files in Makefile.in of src/filed that caused
144 a syntax error when using no optional files.
146 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
147 messages; there is no reason to attempt to load a private key.
148 from master key files.
150 Version 1.39.26 released:
152 kes Apply the three patches from Richard Mortimer.
153 bacula-reposition.patch, bacula-tape-reopen.patch, and
154 bacula-eod.patch. This corrects tape positioning on older devices,
155 and also a problem with btape.
156 kes Apply fix from bug report #696 where writing to a FIFO does not
157 work due to a dumb typo.
158 kes Unlock the tape door before the file descriptor is released. This
159 should fix lots of somewhat subtle failures when using an autochanger.
161 kes Correct mtx-changer bug that I introduced in a recent commit, and
162 pointed out by Robert Nelson -- thanks.
163 rbn Fix Windows' daemons so that messages print to stdout if not
164 running as a service.
165 rbn Add daemon name to trace file name (eg bacula-dir.trace).
166 rbn Fix environment variable expansion in directory names on Windows.
167 rbn Fix autochanger support in fill command.
168 rbn Update SQL scripts to match Unix versions.
169 rbn Fix daemon usage displays.
170 rbn Cleanup bacula-dir.conf template.
171 rbn Install openssl.cnf so that the openssl.exe installed in the
172 Bacula\bin directory can be used to generate keys and
173 certificates for TLS and encryption.
174 rbn Fix cleanup of spool files on Windows.
175 rbn Remove /silent option from daemons on Windows. The new default
176 is the same as the old /silent. To enable the message boxes that
177 previously were suppressed by /silent you must add /debug instead.
178 NOTE: As a result of this change, the first time you upgrade from
179 a previous version of 1.39.x you will receive the message
180 boxes when the remove of the old services succeeds. This
181 is the same behaviour as when migrating from a version prior
183 However, going forward, these message boxes will not appear on
184 upgrades or new installs.
185 rbn Add new /debug option. This option enables the message boxes that
186 previously were suppressed by the /silent option. In addition the
187 daemons running as services will open a console window if this
189 rbn Fix bug with service not being removed on migrated installs. This
190 should correct those cases where the file daemon install was failing
191 when upgrading from versions prior to 1.39.x.
193 kes Turn on heap reporting in Dir with zero debug level.
194 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
195 send the same message to stdout.
197 kes Begin work on new GUI 'console'.
198 kes Make configure look in non-standard MySQL library directory
200 kes Make mtx-changer automatically configure the autochanger wait
201 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
203 kes Correct drop_sqlite_tables.in script to not delete the database.
204 kes When writing to a log file, close and reopen the file descriptor
205 if there is an error writing the file.
206 kes Modify the autochanger loaded?, load, and unload commands to print
207 the full text of any mtx output if there is an error. Helps to
208 ease diagnosis of autochanger problems.
209 kes Correct a few Win32 errno returns in the VSS code so that hopefully
210 a resonable Win32 error message will be printed.
211 kes Convert a few strcat()... to bstrncat() in the Win32 code.
213 rbn Added Windows version of bsmtp.
214 rbn Fixed path search for Windows so that Bacula\bin is automatically
215 searched for programs and scripts.
216 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
219 Version 1.39.24 released:
221 kes Apply dvd find volume patch from Richard Mortimer.
222 kes Eliminate the dvd specific mount routines using only the
224 kes Make update_free_space a method of DEVICE and rename
227 kes Require a messages command acl to be able to receive messages
229 kes Add console, system, and scan job types in util.c.
231 kes Print the Volume purged message only for real jobs to keep
232 from cluttering up the daemon messages.
233 kes Lock the tape drive door while Bacula is using the device.
234 kes Add back the 'No Jobs running' message to FD and SD status because
235 my regression script depends on it, and I'm too lazy to change the
237 kes Start using structure assignments (not too happy about it ...).
238 kes Fix a bug in the tools Makefile that broke on Solaris.
239 kes Unload any autochanger drive during a 'release' command.
241 kes Enhance error message when restoring without bootstrap file.
242 kes Check restored size only for regular files.
243 kes Store Python job level in job record in Dir.
244 kes Add back code to open tape device nonblocking, but if rewind fails
245 release file descriptor.
246 kes Modify acquire.c to first try autoloading the device. Also, ask operator
247 to mount tape if drive cannot be opened.
248 rbn Made Windows service tray status windows resizable.
249 rbn Fixed horizontal scrolling of text in status window.
250 rbn Preserve horizontal and vertical scroll position while
251 updating. This prevents the display being reset to the
252 top line every 5 seconds.
253 rbn Fix Windows cross-compile compatibilty problems with
254 *nix variants such as OS X without the zic command.
255 rbn Eliminate dependency on man2html.
257 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
259 kes Fix a compiler warning in compat.cpp
260 kes Change strcpy to bstrncpy in compat.cpp
261 kes Remove some broken code in bdb_list.c
262 kes Fix, hopefully the last, ACL problem in the restore command.
263 kes Update the README.mingw32
264 kes Add new version of upgrade-win32-client.txt to examples directory.
265 Submitted by Michel Meyers.
266 kes Print an INFO message in the job report when a Volume is marked Purged.
267 rbn Fixed handling of external program and script execution
268 so that the format of the command line is more flexible.
269 Now executable path names containing spaces are translated
270 to the equivalent short name automatically. The result is
271 passed to cmd.exe with the quotes removed.
273 kes Apply the recycle patch from Richard Mortimer.
274 kes Convert a few if statements in dev.c to switch statements.
275 kes Start using print_errmsg instead of bstrerror().
276 kes Print a job message in SD when a job is marked to be canceled.
278 kes All code added back. Fixed block.c read/write to loop only 3
279 times. This apparently keeps the OS from crashing (at least
281 kes The kernel bug still persists. Backup something then immediately
282 do a bscan on the same tape, and the kernel will crash.
283 kes Simplifed tape open(). It no longer uses nonblocking mode, which
284 means that opening with no tape loaded will probably take at least
285 6 minutes before an error is reported.
286 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
287 when doing set_os_device_parameters.
288 kes Report open error in mount.c
289 kes Remove all .exe files from the installer directory on make clean.
291 kes Start adding back removed code.
292 kes Back out a number of changes because backups to tape crash my
294 kes Remove the inetd code from the File daemon.
296 kes Add -c option to pg_dump so that it initializes tables when
298 kes Fix FirstWritten time on Volume to be obtained from SD so that
299 it is the actual time the volume was first written.
300 kes Minor Makefile changes.
301 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
302 ebl Add yes keyword to prune/purge command
304 kes Correct a test in block.c that prevented restore of a DVD from
305 looking at the last part in the spool directory.
306 kes Make some error messages clearer mostly by using the word DVD
307 in the message. Improve infor message in read_record for DVDs.
308 kes Remove DVD kludges in dircmd.c label/relabel.
309 kes Move the dvd relabel code from dircmd.c into
310 write_new_volume_label_to_dvd() adding a relabel argument.
311 kes Rewrite the truncate_dvd() code to be much simpler and
312 more logical. First blow away any spool part, then create a
313 new empty part and write to the DVD.
314 kes Rewrite the can_write_on_non_blank_dvd() code making it
315 only ensure that no valid data is on the DVD -- i.e. it
318 kes Minor Makefile fixes.
319 kes Put attach_dcr_to_dev in a subroutine.
320 kes Make attaching/detaching to/from a device use a flag and
321 only detach if actually attached.
322 kes Add dvd-simulator.in to scripts directory and add to configure.
323 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
324 This could be a cause of a number of drive reservation problems.
325 Note, this code is now in attach_dcr_to_dev().
326 kes Suppress doing Volume updates if it is a system job. This should
327 prevent the DVD label blocking.
328 kes Clear the freespace ok flag in a couple of strategic places.
330 kes Put removing zero sized spool part file in subroutine and
331 call from release_device().
332 kes Add Richard's patch for relabel to dircmd.c, but save and restore
334 kes Rework a lot of subroutines in dev.c to take dcr as an
335 argument. This is done to eliminate the usage of attached_dcrs
337 kes Change truncated_dvd to blank_dvd, which seems more suitable.
338 kes Apply most of Richard Mortimer's truncate patch.
339 kes Create lseek() method for DEVICE that takes dcr as an
340 argument. This is to eliminate the use of attached_dcrs in
341 lseek(). The calls to lseek_dev() must still be changed.
343 kes Apply Richard Mortimer's patches for printing an error
344 message in btape when a DVD is used, and to initialize traceback.
345 kes Added error message to btape when trying to access a file.
346 kes Move prototype of update_slots() to protos.h.
348 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
349 and FDJobStatus to the Director Python variables.
350 kes Make sure valid argument passed to str_to_utime() where Arno
352 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
353 I.e. part of two different patches.
355 kes Modify disk changer to simulate some of the error conditions
357 kes Make sure the close() call in the SD tools is just before the
359 kes Implement dir_get_volume_info() in bls using the patch from
360 Richard Mortimer but call find_num_dvd_parts().
361 kes Implement find_num_dvd_parts() that mounts and scans a DVD
362 and counts the parts.
363 kes Move the omode code in open_dvd() up so that the cannot
364 write on blank disk can check can be bypassed for read mode.
367 kes Disable normal data spooling for DVD writing which uses
368 a different spooling mechanism.
369 kes Apply patch from Richard Mortimer to ensure that the number
370 of DVD parts is correctly updated.
371 rbn Save installer details log in the Bacula directory as
373 rbn Add installer generation of client and storage templates
374 suitable for @inclusion on the director.
375 rbn Mark previously installed Win32 components read-only since
376 deselection doesn't do anything.
378 Version 1.39.22 beta released:
380 kes Fix logic error in handling error return from mtx-changer
382 kes Make status from SD aware of -1 (unknown) Slot status.
383 kes At Eric's suggestion make both the 'slots' and 'drive' commands
384 to the Storage daemon work even if the drive is busy.
385 kes Make two separate Win32 menu links for starting bconsole and
386 wx-console in winbacula.nsi
387 kes Apply DVD part_spooled patch from Richard Mortimer
388 richm@oldelvet.org.uk
389 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
390 rbn Fixed problems migrating settings from previous releases in
391 Win32 installer. Add Readme.txt with an option to show it on
392 the installer Finish page.
394 kes Use get_catalog_resource() to open catalog database
395 to ensure that ACLs are respected and that user is
396 correctly prompted for database.
397 kes Integrate multiple console/director patch from
398 Carsten Paeth calle@calle.in-berlin.de
399 ebl Add character substitution in Job/JobDefs WriteBootStrap.
400 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
401 kes Apply patch supplied in bug #656 to pass priority field
402 in the run dialog to the Director in gnome console
403 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
404 this will fix bug #627 where Bacula eventually gets
405 confused about what Volume it wants.
406 kes Add a new close_part() class in the SD to save the device
407 state around open/close_part/open for DVD writing. This
408 should fix the num_dvd_parts getting zeroed as reported by
410 kes Apply patch from Richard Mortimer that correct edit code
411 for debug output of st_size.
412 ebl Add support of encrypted data stream to bscan.
413 display data_len instead of data content (may be binary)
415 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
416 bcopy. Fixes bug #669 reported by Eric.
417 kes Fix incorrect number of arguments in SQL statement in
418 sql_get.c as reported by Eric.
420 kes Update examples directory.
421 kes Remove unused variable in winservice.cpp
422 kes Make Win32 make command build installer.
423 rbn Add new Install Type page, used to select between Automatic
424 and Custom installs. Automatic installs only prompt for
425 configuration items that can't be reasonably defaulted.
426 rbn Added Bacula logo to page headers.
427 rbn Added Upgrade support
428 - Configuration and component selection are migrated from
430 - Configuration of upgraded components is preserved and
432 - Configuration of new components is handled according to
433 the Automatic / Custom selection.
434 - Component selection is defaulted to previously selected
436 rbn Installation of Server components is disabled on
437 Windows 95, 98 and ME.
438 rbn Added URLs for support, info and upgrades to Bacula entry
439 in Add/Remove Programs.
440 rbn Added Version info to Bacula entry in Add/Remove Programs.
442 kes Correct dvd code that breaks tape labeling.
443 kes Implement Enabled on update slots.
445 kes When doing a label, pass the VolBytes back to the Director,
446 which puts it in the catalog.
447 kes Print an error message if the user attempts to prune an
449 kes Need to start using %ld when sscanfing 32 bit values.
451 kes Correct the counting of VolCatBytes for DVDs.
452 kes Add code to mount.c to require that VolCatBytes corresponds to
453 what is actually found when doing an append.
454 kes Update freespace only after writing on the DVD.
455 kes Remove code that blows away the current part in the spool file.
457 kes Apply new dvd-handler patch from Richard Mortimer.
458 kes Tweak so that debug level 20 shows only DVD commands.
459 kes Correct spooled_part flag in dev.c close() so that it is cleared
460 when the spool file is deleted or does not exist.
461 kes Print part number in read_records when eof hit (restore).
462 rbn Installer default changed to start services on new install.
464 kes Make find with no args in tree restore return error rather than
465 stopping the selection. Fixes bug #665
466 kes Rework DVD writing to ensure that the last part is written
467 on open_next_part when dealing with a spool file.
468 kes Correct the lseek_dev() routine to handle end point correctly
469 (bug introduced by me).
470 kes Allow part number to exceed num_dvd_parts in lseek_dev().
471 rbn Change make_session_key on Windows to use WIN32 APIs to produce
473 rbn Add new tool scsilist.exe which displays the changer, tape and
474 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
475 to add them to bacula-sd.conf.
477 kes Apply dvd-handler patch from Richard Mortimer.
478 kes Apply dvd error check patch from Richard Mortimer.
479 kes Apply bpipe race patch from Richard Mortimer.
480 kes Rework how DVD labels are handled and set append only
481 when part > num_dvd_parts.
483 kes Rework many features of DVD writing and reading. Added many error
484 messages. Most importantly changed part to represent the current
485 part number base zero. This makes current DVD writing incompatible
486 with previous version.
488 kes Add host:port to connect failure messages to FD and SD from Dir.
489 kes Add WhereACL to console ACL list. If nothing is specified, only
490 the default is permitted for restore. Otherwise, *all* allows any
491 path, or you can specify permitted paths. This should allow control
492 over where users can restore files. This is untested.
493 kes Modified message to add a ? (as in loaded?) when querying the autochanger
494 for what Slot is loaded.
495 kes Fixed the use of Slot, so that is more correctly maintained, thus
496 eliminating unneeded duplicate calls to determine what Slot is loaded.
498 kes Install man pages with 'make install'
499 kes wx-console crashes because of differences between Bacula and wxWidgets
500 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
502 kes correct improper indenting in wx-console/console_conf.c
503 kes update wx-console header copyrights
504 kes Fix bug #658 where wx-console mangles file/directory names containing
507 kes Add Media.Enabled flag to client backups for dotcmds.c
508 kes Enforce Media.Enabled=1 for a current restore to work.
509 kes Require restore case 3 to have sqlquery permission to work.
510 kes Remove obsolete del_MAC sql command.
511 kes Ensure that bscan creates Volumes with Enabled=1.
513 Version 1.39.20 beta released:
515 kes Correct missing Client table reference in SQL pointed out by
518 kes Fix Win32 build (new entrypoint, start baculafd).
520 kes Add -n option to bconsole to turn off conio.
521 kes Print JobIds to be migrated in Job Report.
522 kes Add additional user supplied notes to the messages part of
523 bacula-dir.conf concerning multiple email addresses.
524 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
525 kes Add more recent Feature requests to Projects file.
527 kes Apply Maritn's fix to src/win32/Makefile.
528 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
529 kes Implement pruning for Migration and migrated jobs.
530 kes Implement PoolOccupancy migration.
531 kes Implement PoolTime migration.
533 kes If doing a mount, look for a slot, and if specified pass it to
534 the SD so that it can load the autochanger.
535 kes Return DVD=1 flag if a label command is done to a DVD. This
536 permits setting VolParts to 1.
537 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
538 rework ua_label code based on DVD media type to use DVD flag returned.
540 kes Eliminate some compile warnings in dird_conf.c
541 kes Format the bytes field in the terminated jobs part of the status
542 command for the three daemons with suffixes to reduce print size
543 of backup bytes. Suggested by a user.
544 kes When not descending into a directory, print the File= name that
545 triggered it -- makes why not descending a bit clearer.
546 kes Do not unload autochanger when doing a list command -- basic code
547 from Eric Bollengier.
549 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
550 to build-depkgs-mingw32. It now handles two options -h to display
551 help and -C to reextract the source and apply the patches. The -C
552 option is useful for updating the source after new patches are
554 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
555 This allows updating to new versions without having to modify the
556 script and makes it easier to figure out which packages and which
558 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
559 as build-depkgs-mingw32 except they are built using Microsoft Visual C
560 and placed in the depkgs-msvc directory. There is also an
561 External-msvc file to describe the packages.
563 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
565 kes Fix bug #462 incorrect error message printed when client script called
566 from File= was not found.
567 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
568 do a rewind on Solaris when no tape is in the drive (Solaris does not
569 have the detailed errno found on Linux). Added Solaris specific code.
570 Note, this may apply to other OSes as well.
572 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
573 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
574 fix bug 648 - update sqlite script patches, lock out gnome2console
575 builds for platforms with gtk+ < 2.4.
576 Updated build_rpm.sh - add remote source directory, add switch for
577 signing, refine file names.
578 Updated spec file again for Mandriva build as they have this curious
579 custom of silently converting all manpages to bzip2 format just before
580 the final packaging step.
582 rbn Fixed the Windows Makefiles so that they won't accidentally try and
583 pickup binaries for the Unix build. This allows both the Unix
584 build and the Windows build to be built in the same tree without
585 interfering with each other.
586 rbn Fixed error handling and cleaned up mtx-changer.cmd.
587 rbn Added the rest of the database scripts. These are installed but are
588 not yet edited for variable replacement.
589 rbn Broke out the cats functionality from bacula.dll and put into new
590 separate dlls for each database type. At installation time the
591 correct one is copied to bacula_cats.dll.
592 rbn Eliminate the need to install the mysql.dll on client only builds.
593 rbn Moved dird/sql_cmds.c into the cats directory so all the database
594 specific #ifdefs were in the cats directory.
595 rbn Added a new sql_cmds.h with all the declarations for the variables
596 exported from sql_cmds.c.
597 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
598 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
600 kes Correct improperly formatted list command output reported by Dan.
602 kes Correct despool time calculation.
604 kes Remove previous changes to compat.cpp as they create problems.
605 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
606 kes Attempt to fix problems with the msg_queue crashing on Solaris
607 when Bacula is terminating, but problems remain.
608 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
609 name editing problems with too many \\?\es.
610 kes Fix some Bacula source code style problems in compat.cpp.
611 kes Add debug code to compat.cpp and convert non-Bacula debug code
614 kes Change the name of the technical notes file from kes-1.39 to
615 technotes-1.39. Prefix my messages with 'kes '.
616 kes Allow dequeue_messages() to be called twice. Should fix bug
618 kes Add Job type to bscan Job information output.
620 kes Update copyright date in program files, and for the most part
622 kes Implement %q in bsnprintf.c apparently I forgot it.
624 kes Make disk-changer sed command compatible with FreeBSD.
625 kes Make a first cut at a ReleaseNotes and ChangeLog for a
627 kes Make make clean descend into the src/win32 directory.
628 kes Fix some #ifdefing so that Solaris and FreeBSD compile
629 sys/stat.h was turned off.
630 kes Use suffix editing for new transfer rate messages.
631 kes Attempt to come up with a workaround which seems to be an OS
632 bug where write() returns EBUSY. IMO this should not happen.
633 It triggered in truncatebug test. The workaround retries using
635 kes Eliminate a strerror() call in a class method that failed with
637 kes Use rm -rf rather than rmdir to delete the src/win32/release
638 directory during make clean.
640 kes Make bscan ignore ACL streams.
641 kes Update projects files with new Feature Requests.
642 kes Generate current English and French manuals and upload
644 kes Update the home page to include the new British/French flags to
645 switch between translations. Work done by Alexandre Baron.
646 kes Make disk-changer script print an error message if the changer
647 directory is not defined.
648 kes Create a generic DB routine for getting an int (32/64 bit) from
650 kes Add more migration code.
651 kes Add a few more files to .cvsignore here and there.
652 kes Minor fixes for SD write rate and despooling rate.
653 kes Turn off new test code in src/console.c
657 kes Incremented the version number to signify that all of Robert's code
658 for Win32 that was in the branch is now integrated into the HEAD,
659 and that Eric has submitted code that we hope will provide limited
660 backward compatibility with 1.38 file daemons (more testing to be
662 kes I rationalized a few of the names of the variables (mainly jcr names)
663 that are used during migration as keeping three different jcrs at the
664 same time clear in ones head is not easy.
668 eb Tweak new runscript feature to work with 1.38.x FDs.
669 eb Correct crypto.c to fix segfault when restoring an encrypted stream
670 on fd which don't use rsa keys.
671 eb Add yes/no English keywords on localized yes/no questions.
673 kes Several important commits from Robert Nelson for code cleanup and
675 kes Modify console.c so that when conio is enabled, it converts \n to
676 \n\r before outputting to the console. Hopefully this will fix
677 the problems with expect in Perl that Eric saw.
679 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
681 kes Add Comment field to llist of a volume.
682 kes Allow true/false in some yes/no questions.
683 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
684 kes Remove a few /n's when scanning commands from another daemon. This
685 permits adding additional fields later.
686 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
687 kes Update README.mingw
689 kes Tweak authentication to work with 1.38.x FDs.
690 kes Tweak catalog make scripts.
691 kes Fix catalog upgrade scripts so that they work.
692 kes Correct despooling debug code to eliminate race condition.
694 kes Add additional fields as specified by Arno to LocationLog.
695 kes Add comment field to the Media record.
696 kes Add Time field to the Log record.
697 kes Correct migration SQL (thanks to Bill Moran) so that it
698 runs with PostgreSQL also.
699 kes Add spooling/despooling info in status output of SD.
701 kes Spend a lot of time integrating mkcdrec with the rescue disk.
702 kes Add VOLMGMT message class for volume management messages (none yet).
703 kes Add CATALOG as a destination. It goes into the LOG table.
704 kes Implement the Log table in the DB.
705 kes Implement the Location Log table in the DB (for user use).
706 kes At Eric's request add a run_scripts() just after blast_data in
709 kes Add Enabled column to Location, correct some typos in DB schemas.
710 kes Correct bug I introduced into RunScripts enum.
711 kes Add log table to Catalog
712 kes Purge original job migrated if the migration terminates normally.
713 kes Cleanup purging of files/jobs so that it is done only in a
715 kes Add new VOLMGMT message class.
716 kes Add Catalog message destination (user conf code remains to be written).
718 kes Modify read_record and friends to properly deal with migration
720 kes Update debug code in read_record.
722 ======================= Warning ==========================
723 Separate read and write storage in Jobs in the Director. This
724 is a major rewrite of some of the low level code and hence has
725 a high probability of introducing bugs.
726 ==========================================================
728 kes Move the job init code up to *before* the job is put into
729 the job queue (resource allocation queue). This permits the
730 job to establish whether it will read or write or do both.
731 kes Add name() methods to all the resource classes.
732 kes Implement separate read and write storage resource
733 allocation/deallocation in jobq.c
735 ======================= Warning ==========================
736 Implemented new method of getting the default Storage from the Media
737 record rather than from the MediaType for restore. As a fall
738 back, if no Storage is defined, use the MediaType. This
739 eliminates most all prompts if there are multiple MediaTypes
740 used. This is an important and fundamental change.
741 ==========================================================
743 kes Add more detail (Storage, Device) to list of volumes printed
745 kes More code in migrate. In particular start multiple jobs if
747 kes Probably overkill, but ensure that the bsr is unique even within a
749 kes Rework bsys.c drop() so that it now should work as expected.
750 kes Update a bunch of old copyrights -kes particularly in .h files.
751 kes Remove src/lib/bshm.c/h
755 ======================= Warning ==========================
756 All hash codes in the database are now kept in world
757 compatible base64 format (no = filling). This means that
758 all FileSets will be updated and if you are running
759 verify jobs, you must do an InitCatalog.
760 Authentication uses the new algorithm, but should be
761 backward compatible with 1.38.x
762 ===========================================================
764 kes Modify the authentication routines so that the 1.39.15 Director
765 always runs with the compatible binary to base64 code (same as
766 the rest of the world). It will however detect if an SD or
767 FD is running the old code and if that is the case, will use
768 the old algorithm for authentication. However, all consoles must
769 use the compatible algorithm, and all data entered into the database
770 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
771 use the compatible algorithm.
772 kes Rename the cram_md5 routine names to be slightly more appropriate
773 to what they are doing (challenge and respond).
774 kes Robert committed his #ifdef and header cleanup.
776 kes Fix a compiler warning in files/backup.c
777 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
779 kes Robert committed his low impact changes.
780 kes I removed a size_t from the jcr.h definition.
781 kes Update the tape regression scripts (still to be tested).
782 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
783 kes Require done or quit to exit from in memory tree restore.
785 kes Write install/uninstall of new manpages. There are now a
786 pile of man pages. Some of which need a lot of work.
788 ======================= Warning ==========================
789 The --mandir ./configure option now points to the top level
790 man directory. The man files will be installed under
791 mandir/man8 and mandir/man1 as appropriate.
792 ==========================================================
794 kes Add complete text of GPL to LICENSE.
795 kes Implement job report that indicates where Storage and Pool
796 came from -kes with overrides and Pool storage and NextPool,
797 it is all very complicated.
798 kes Create a few common subroutines for backup.c and migrate.c
799 kes Eliminate warning messages from tray-monitor.c
801 kes Apply fix for scheduler for missing unlock_jobs().
802 kes Clean out autoconf caches before rebuilding configure
803 kes Fix the FreeBSD pthreads lib define updated by Dan.
804 kes Add missing semicolon in src/console/console.c
805 kes Add Robert's enhanced version of build-win32-cross-tools
806 as well as his patch file.
807 kes Note, the new gcc options are likely to break building of
808 wx-console or the tray-monitor ...
810 kes Implement Robert's suggestion to suppress printing compile lines.
811 kes Detect GCC correctly (I hope)
812 kes If using GCC (actually g++) add the following compiler flags
813 -fno-strict-aliasing -fno-exceptions -fno-rtti
815 ===================== Warning =============================
816 Turn on new bsnprintf() code. This could cause print output
818 ===========================================================
820 kes Fix crypto when not using openssl. I previously overlooked this.
821 kes Eliminate crypto type punning problems by eliminating void * and
822 using uint8_t * instead.
823 kes Harden authentication failure in FD by single threading errors
824 and forcing a 6 second wait.
826 ===================== Warning =============================
827 Removed 'Accept Any Volume' directive.
828 ===========================================================
830 kes Major cleanup and simplification of regress using shell functions
831 (more tests to be converted to new format)
832 kes Add detection of 64 bit Irix as indicated by user.
833 kes Increment catalog database id from 9 to 10.
834 kes Add a few of the new database fields to the various C++
836 kes Implement code to fill in the most important new fields (e.g.
838 kes Ensure that most of the new fields are in create/get/insert/update.
839 More work to be done.
841 kes Update some very old licenses in src/cats.
842 kes Modify the database format for handling Migration jobs:
843 Add PriorJobId, RealEndTime to Job table
845 Remove Stripe from JobMedia record (not used, wasting space)
846 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
847 Add Cost to Location table.
848 kes Delete mac_record subroutines.
849 kes Add new table values to create/update/get routines as appropriate.
850 kes Update the update_tables and make_tables scripts.
851 kes Make a first cut in using a union where multiple pointers (actually
852 pointers to pointers) are stored.
853 kes Make some changes to base64.c suggested by Robert and others and add
854 a small amount of documentation.
855 kes Add some changes suggested by Peter for Solaris (bregex...)
856 kes Make runscript.h always built because it needs to be pulled into
857 more places. In particular its RES was left out of a union.
858 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
859 This makes it slightly easier to detect uninitialized variables.
861 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
862 sometimes creates install problems.
863 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
864 Nelson's code. More to do.
865 kes Convert a few store_bit to store_bool in filed_conf.c.
866 kes DVD tweak to block.c as supplied by Uwe Muessel.
868 kes Modify configure.in to check for typeof().
869 kes In findlib/attribs.c use typeof instead of templates if possible.
871 kes Implement partial error messages for src/filed/acl.c
872 kes Fix return code to fail when doing update barcodes and
873 Pool resource is not found. This previously caused Volumes
874 to be labeled as cleaning tapes.
875 kes Small updates to projects.
877 kes Add Eric Bollengier patch for new RunScript directive. It breaks
878 compatibility between dird and fd.
880 kes Prevent DVD code from rewriting label if the device cannot be
882 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
883 fix Debian build bug.
884 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
885 kes Integrate manpages contributed by Jose Luis.
886 kes Update projects file.
887 kes Add manpages Makefile.in to configure.in
888 kes Remove installation of bacula.8 in scripts directory.
890 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
892 O_NOATIME is a open() flag which makes it possible to read a file without
893 updating the inode atime (and also without the inode ctime update which
894 happens if you try to set the atime back to its previous value). It also
895 prevents a race condition when two programs are reading the same file, but
896 only one does not want to change the atime. It's most useful for backup
897 programs and file integrity checkers (and bacula can fit on both
900 Recent versions of the Linux kernel and glibc have support for it (the
901 glibc support being mostly copying the O_NOATIME definition to
902 bits/fcntl.h). If there's no support for it on the kernel, trying to use
903 it does nothing (since the kernel ignores unknown flags).
905 If the kernel has support for it, trying to use it either works, fails
906 silently (mostly in remote filesystems), or returns errno=EPERM (if you
907 are not either the owner of the file or root). A simple way to prevent the
908 failure is to open the file without the flag and set it later with
909 fcntl(F_SETFL), ignoring any EPERM errors.
910 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
911 of restarted jobs to complete (due to a destroyed pthreads conditional
912 variable used by the message thread).
913 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
915 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
916 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
917 colons in query.sql file.
918 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
919 not to create orphans.
920 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
921 in restore long listing.
922 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
923 of incorrect MarkedId.
924 kes Apply patch from adioso bug #616 to correct text in manual (replace
925 Director with File daemon).
926 kes Rework a few of the zlib changes so that they build properly.
929 kes Move DIR 'run' command to SD before starting the message thread
930 as suggested by Cristopher Hull to avoid a race deadlock from
931 two threads using the bsock structure.
932 kes Modify LICENSE to correct some problems pointed out by Debian.
934 kes Correct EOF with no \n lex.c problem.
935 kes Tweak compat.h compat.cpp and merge with apcupsd
936 kes Add additional INFO messages if autochanger cannot be used.
939 kes Simplify Win32 Makefile
940 kes Correct count of buffers/bytes used by smartall.c
941 kes Updated compat.h after porting apcupsd to MinGW.
943 kes Work on getting wx-console building on MinGW. wxWidgets now builds
944 started adding Makefile ...
945 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
947 kes Reloading a bad configuration file doesn't kill director any more.
948 Thanks to fix from Eric Bollengier.
950 kes Fix problem of accents with new Win32 code.
951 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
952 works in the MinGW build with the exception that there
953 is a problem with accented characters -kes i.e. there is
954 some mapping problem with wide characters.
955 kes The code no longer compiles with Microsoft VC++.
957 kes Start implementing Christopher's St.Bernard code.
958 kes Add Christopher's mods for opening files.
959 kes Strip \r \n from Win32 error messages (Christopher)
960 kes Add more info about Win32 system if unknown (Christopher)
961 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
962 kes Fix a number of incorrect strings marked for translation, when
963 they should not be (e.g. commands).
964 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
965 Patches supplied by user in bugs #608 and #599.
966 kes Use most recent of st_ctime and st_mtime in restore tree DIR
967 listing. This fixes some problems with Win32 printing incorrect
969 kes Correct the clock shift comm time calculation between the DIR
970 and the FD. It was added rather than subtracted.
971 kes Strip all backslashes in filenames to be restored on Win32
972 machines -kes the names should all be in Unix format, and if
973 there are any backslashes it is most likely due to an improper
974 FileSet definition, and the files will not otherwise be
976 kes Remove lib/regex.c (replaced by bregex.c).
977 kes Delete src/win32/License.txt
978 kes Modify installer to install LICENSE
980 kes Fix bug in build-win32-cross-tools script reported by Howard
981 kes Implement cross compiled bconsole
983 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
984 kes Write first cut of README.mingw32
985 kes Add back ua_label barcode fix from Rufolf Cejka.
986 kes Integrate the majority of the Mingw cross-tools submission
987 made by Howard Thomson. Everything compiles, with zlib, openssl,
988 and VSS turned off. Linking needs a pthreads library ...
990 kes Add 'Dir Status' button to the gnome console.
991 kes More work on migration.
992 kes Restore non-compatible base64 coding to permit compatibility.
993 kes Display heap stats in Storage daemon without debug level.
995 kes Integrate most of the MinGW changes -kes more to do.
997 kes Implement using pg_config for finding PostgreSQL files.
998 Fixes bug #600. Patch supplied by user.
999 kes Remove -t option from mktemp in mtx_changer.in and use
1000 working directory. Fixes bug #578.
1001 kes Update job start time after the any run before job so that
1002 files created by the script are only backed up once. Fixes
1004 kes Strip trailing newline only from filenames entered in
1005 the restore command when reading a file. This permits
1006 the user to enter filenames with trailing spaces. Fixes
1007 bug #549. The user supplied a patch that I modified slightly.
1008 kes Use the most recent time (st_mtime, st_ctime) in the dir
1009 command in restore. This gives the user a better idea of what
1010 the newest file really is. This fixes bug #574. The fix
1011 was suggested by the user.
1012 kes Implement a compatible version of base64. This permits external
1013 programs to duplicate Bacula's base64 algorithm using standard
1014 routines. This fixes bugs #296, and 565. Patch submitted by
1016 ================= Note ========================
1017 Previous Signatures stored in the database are no longer
1018 compatible with this. The main downside is for Verify jobs,
1019 and doing an InitCatalog run will fix the problem. Also, the
1020 authentication between the deamons is changed, so all daemons
1021 must be simultaneously upgraded.
1022 ==============================================
1023 If you don't like this fix, set:
1024 const bool compatible = true;
1026 const bool compatible = false;
1029 kes Ensure that DB signature is never NULL.
1030 kes Ensure that DB table names are not translated.
1031 kes Fix scheduler to handle time skew (eg daylight savings).
1032 kes Fix scheduler to use lock_jobs() to avoid most problems
1033 with reload. Window is now milliseconds.
1035 kes Apply patch from Christopher Hull
1036 kes Allow multiple connections to database with different
1038 kes Invalidate the scheduler when doing a reload. Fixes seg
1039 fault, but still 60 second window.
1040 kes Additional info in Reschedule message.
1041 kes Use set_jcr_job_status() everywhere to prevent loss of
1043 kes Display peer IP in FD if error from connecting DIR.
1044 kes Don't increment file count for DIRBEGIN.
1045 kes Replace illegal characters in Win32 filename by _.
1046 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1047 kes Hash hard link filenames rather than linked list.
1048 kes Fix for security failure in chdir on Win32.
1049 kes Add CreateDirectoryA/W win32 API entry points.
1050 kes Add /silent option to Win32 FD for Install/Remove service.
1051 kes Always print Heap statistics in FD.
1053 kes Remove the -f option from the chown in Makefile.in for more
1055 kes Change setting the group in Makefile.in to use chgrp for
1057 kes Implement a write_store and read_store to replace
1058 dirstore in reserve.c
1059 kes Implement a Bacula read/write lock for Python rather
1060 than using the Python lock to avoid recursive problems.
1061 kes Correct the uninstall directory names in filed/Makefile.in
1062 as reported by a user.
1064 kes Correct some problems with database creation (new tables).
1065 kes Replace a bunch of old 0x%x by %p.
1066 kes Get first cut of Migration with Job selection working.
1068 kes Change store_bit() to store_bool() for the Spooling in
1069 dird_conf.c -kes bug reported by Robert Nelson.
1071 kes Correct Makefile bug found by Dan Langille.
1073 kes Correct Makefile for Solaris /bin/sh
1074 kes Correct mtx-changer.in for Solaris /bin/sh
1075 kes Abort if a conf resource does not have a Name =
1077 kes Change the name of the regex program to bregex.
1078 kes Add the bwild program to the tools directory. It is similar
1079 to the bregex program.
1080 kes Implement create bregex.h and bregex.c in src/lib from the
1081 Python regexp program.
1082 kes Use the new bregex.c to implement Regex expressions on Win32.
1084 kes More work on migration.
1085 kes Implement wild program in tools directory for testing
1086 wild-cards. Almost identical to the regex program.
1087 kes Up port VSS single thread locking code.
1088 kes Replace N_(..) by NT_(...) to inhibit translation of
1090 kes Modify Makefile to change the permissions on Working Directory
1091 to 770 if the directory is created.
1092 kes Do not fail the Makefile if changing the permissions or
1093 owner/group on WorkingDir fails.
1094 kes Remove early selection of Scratch Volumes in the recycling
1096 kes Correct the old recycling algorithm so that Scratch Volumes
1097 are selected when looking for a Volume in the changer.
1098 kes Correct a typo in the Verify SQL reported by Joe Park.
1100 kes Remove automatic case folding on Windows FDs. You must
1101 explictly use the 'Ignore Case = yes' option.
1102 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1103 scratch volume in an Autochanger early in the 'recycling'
1106 kes Make weof() and clrerror() methods of class DEVICE.
1108 kes Tweak license to include Microsoft restrictions.
1109 kes Move mysql.reconnect to after real_connect(). Thanks to
1110 Frank Sweetser for the patch.
1111 kes Disallow a backslash in a File = directive (Windows junk)
1112 unless the string is quoted.
1113 kes Apply Eric's patch to ua_label.c so that daemon protocol
1115 kes Add NT_ definition for strings that should not be translated.
1116 kes Apply NT_() to ua_label.c
1117 kes Remove timed wait for VSS on Win2K3 as it is not yet
1119 kes Correct bacula.in script to reference bacula-ctl-xx in the
1120 sysconfig directory rather than the bin directory.
1122 kes Fix a long standing bug in the bacula start/stop scripts.
1123 kes Attempt to add the new bacula-ctl-* files to the rpm.
1124 kes Switch to using typeof() for list traversing to avoid
1125 as many FC5 g++ compiler warnings as possible.
1127 kes Split the bacula start/start script into four files:
1128 bacula -kes starts and stops calling other scripts
1129 bacula-ctl-dir -kes starts/stops the director
1130 bacula-ctl-fd -kes starts/stops the File daemon
1131 bacula-ctl-sd -kes starts/stops the Storage daemon
1133 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1134 kes Correct editing of JobId from int to int64 in fd_cmds.c
1135 kes Eliminate FileSet name race with bash_spaces() and multiple
1136 threads by bashing in a local.
1137 kes Fix error return from 'use storage' to print a correct error
1138 message rather than nothing.
1139 kes Correct false re-read last block error message when two jobs
1140 are simultaneously writing at the end of a tape.
1141 kes Simplify exit conditions in the reserve.c code to avoid
1142 possible non-release of reservation_lock().
1143 kes Suffle lock order in reserve to avoid deadlock between
1144 reservation lock and device mutex.
1146 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1147 tracking this down for me !!!! as it broke the Win32 build.
1149 kes Integrate addition of line count limitation to bsmtp -l from
1150 Sebastian Stark <stark at tuebingen.mpg.de>
1152 kes Implement regex test program in tools directory.
1153 kes Attempt to fix time problem with bsmtp with foreign langs.
1154 kes Add strip_trailing_newline() submitted by user.
1155 kes Implement regex matching in migrate.c
1157 kes Fix bug #537 to allow arbitrary time to mount a volume for
1158 restore, if polling is turned on.
1159 kes If dir_user or dir-group is specified in ./configure apply it to
1160 the working-dir. Fixes bug #533.
1161 kes If rescheduling a job cancel the previous incarnation with the SD.
1162 Fixes bugs #566 and 557.
1163 kes Fix bug #567 do_message() definition type conflict.
1166 kes Add more jcr methods and make mutex and use_count private.
1167 kes Create lock/unlock methods for jcr.
1168 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1169 records to get to seek position.
1170 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1171 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1172 terminates correctly by doing pthread_kill(). Do not destroy
1173 SD cond wait variable between executions of the job. Use local
1174 mutex for cond variable to avoid blocking jcr chain. Fix poor
1175 use of jcr use count in jobq.c for restarted jobs.
1176 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1177 lib/jcr.c -kes prevents locking the jcr chaing.
1178 kes Apply patch from bug #564, which corrects listing volumes with
1179 multiple autochangers. Apply same fix to next volume list.
1180 kes Fix bug #562 where restore bootstrap file is not unique.
1181 kes More details in implementing David's migration syntax proposal.
1182 kes Save and restore dcr when swapping drives so that if we have
1183 a write dcr it is not lost.
1184 kes Use new routine lock_reservations() to lock the reservations
1185 system, and call it while looking for a volume in askdir.c.
1186 This could possibly fix bug #543.
1187 kes Stop SD command loop if job is canceled.
1190 kes Remove old code from findlib/create_file.c
1191 kes Rename mac.c migrate.c
1192 kes Add user friendly display of VolBytes in job report.
1193 kes Rename target... to previous... to make it a bit easier to
1195 kes Add selection type and selection pattern to Migration (idea
1196 given by David Boyes).
1199 kes The po files should now be current.
1200 kes Fix new sql_use_result() code to properly release the
1201 buffers in all cases.
1202 kes Use the keyword ujobid to mean the unique job id; job or jobname
1203 to mean the Job name given on the Name directive, and jobid to
1204 be the numeric (non-unique) job id.
1205 kes Allow listing by any of the above.
1206 kes Add the user friendly job report code for reporting job elapsed time
1207 and rates with suffexes from John Kodis <kodis at comcast.net>.
1208 kes Add Priority and JobLevel as Python settable items.
1209 kes Use TEMPORARY table creation where the table is created by
1211 kes Add new code submitted by Eric for waiting on specific jobid.
1212 kes Add ACL checking for the dot commands.
1213 kes Fix restore of writable FIFOs.
1214 kes Fix a bug in bpipe where the string was freed too early.
1216 kes Modify the Python class examples to inherit object -kes new way
1217 of defining classes. Patch from Felix Schwarz.
1218 kes Implement jobuid to replace old usage of job in keywords as
1219 suggested by Eric Bollengier.
1220 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1221 wait (wait for all jobs to stop)
1223 wait jobuid=unique id
1225 kes Implement write variables for Python to set Priority (anytime), and
1226 Job Level, only during JobInit event.
1228 kes Fix the block listing bug pointed out by Arno.
1229 kes Update the po files at Eric's request.
1231 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1232 accept time qualifiers.
1233 kes Make catalog respect ACL.
1234 kes Add recycle count to Media record.
1236 Changes to 1.39.6-beta1 24Feb04
1238 kes Add Rudolf Cejka's new rc-chio-changer.
1239 kes Implement pulling Volume from Scratch Pool if the
1240 Volume is in the autochanger.
1241 kes Implement additional command arguments for update Volume.
1245 kes Back port changes to 1.38.5
1246 kes Fix recycle SQL for StorageId.
1247 kes Fix misplaced quote in mtx-changer script.
1249 kes Note. Your database must be updated, or you must create
1250 a new database. I have not yet incremented the database level.
1251 kes Add Location table.
1252 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1254 kes Implement create/get mac record in database for adding extended
1255 Migration data to the job record.
1256 kes Add new MAC table to update/make database scripts.
1257 kes Return Storage name used when getting VolumeNames for a job.
1258 kes Change bsr file keyword Storage to Device, which is more accurate.
1259 kes Ensure that Mac records are pruned/purged.
1260 kes Tweak SD tools to deal with changing media type.
1261 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1262 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1263 that the subroutine can switch devices, and hence dcrs.
1264 kes Modify the multiple MediaType read code to re-use the same
1265 dcr when switching devices. This makes the code much more
1267 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1268 from a table for restore.
1269 kes Add Storage name to VolParams, but it really should be Device.
1271 kes Add disk-changer to scripts directory + configure/Makefile
1272 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1273 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1274 kes Implement new store_bool that stores in a bool.
1275 kes Add true/false to yes/no conf directives.
1276 kes Make first cut at changing appropriate store_yesno to store_bool.
1277 kes Complete implementation of Pool storage devices.
1278 kes Move starting clones to job.c
1279 kes Move create_restore_bootstrap_file() to job.c
1280 kes Make copy_storage() more general to be able to handle
1282 kes Cleanup a lot of migration code for manual running, including
1284 kes Move getting a scratch Volume into a subroutine.
1285 kes Make all places a Volume that is added to a pool to
1287 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1288 kes Fix segfault in restore command when no value specified.
1289 kes Start adding code to handle multiple MediaTypes in restore.
1290 kes Eliminate race condition in getting Volume name for
1291 two drive autochanger.
1292 kes More debug code in autochanger.
1293 kes Add storage keyword to bootstrap file, add parsing.
1294 kes Move slot in bsr file into Volume record as there will be
1295 a different slot for each Volume.
1296 kes Create reserve.h
1298 kes Implement Pool storage overrides.
1300 kes Implement first cut of Migration.
1301 kes Implement mysql_use_result() from patch by Karl Hakimian.
1302 This reduces significantly the memory consumption during
1303 the restore tree building, and hence runs faster too.
1304 kes Implement StorageId patch supplied by user (reggie) in bug
1305 #536. This should permit Bacula to work correctly with two
1307 kes Implement Job listing variations suggested by a user.
1308 kes Move updating bootstrap code in backup.c to subroutine
1309 update_bootstrap_file().
1310 kes Add new job status elapsed time and bytes written user
1311 friendly job report output patch sent by John Kodis
1312 <kodis at comcast.ne>.
1313 kes Implement a storage list in Pools.
1314 kes Separate out setup_job() code from run_job().
1315 kes Get migration working -kes lots of changes in mac.c in both
1317 kes Apply patch from user (Eric Bollengier I think) that fixes a
1318 DIR crash when no arguments are supplied to a dot command.
1319 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1320 kes Fix command arg name->volume in label command of gnome-console.
1321 kes Fix SD acquire.c to release correct DCR by explicitly testing
1322 on the dcr address rather than trying to devine if it is a read
1323 or write dcr. This failed in error conditions when the device was
1327 kes Apply user supplied patch for more readable rate output
1329 kes Continue implementing migration.
1330 kes Implement support for removable filesystems in SD.
1331 kes Ensure that btraceback scripts can be read by anyone.
1332 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1333 kes Correct bug where canceling restore before the FD contacts
1334 the SD causes the drive to be left in read mode.
1335 kes Move ofline_or_rewind into DEVICE::close().
1336 kes Eliminate close_device.
1337 kes Convert several dev subroutines to methods (e.g. bsf,
1339 kes Eliminate force_close_device().
1340 kes Implement Device Type directive in Device resource that
1341 can have values File, Tape, Fifo, DVD, or Prog.
1342 kes Add has_cap() method to Device.
1345 kes Add patch from bug #527 to allow RedHat user to specify
1346 options/user/group for starting each daemon in
1347 /etc/sysconf/bacula.
1349 kes Add two new queries to query.sql provided by Arno. One
1350 list volumes known to the Storage device, and the other
1351 lists volumes possibly needing replacement (error, ...).
1353 kes Add periodic (every 24 hours) garbage collection of memory
1354 pool by releasing free buffers.
1356 kes Correct bug counting sized (for display only) in smartall.c
1357 kes Print FD mempool stats if debug > 0 rather than 5.
1359 kes Make db_lock() mutex error fail the job rather than abort
1360 Bacula. Canceling the job caused the mutex to fail.
1361 kes Correct bug in alist.c that re-allocated the list if the
1362 number of items goes to zero.
1363 kes Move the reservation system thread locking to the top level
1364 so that one job at a time tries all possible drives before
1366 kes Implement a reservation 'fail' message queue that is built
1367 and destroyed on each pass through the reservation system.
1368 These messages are displayed in a 'Jobs waiting to reserve
1369 a drive' list during a 'status storage='. Note, multiple
1370 messages will generally print for each JobId because they
1371 represent the different problems with either the same drive
1372 or different drives. If this output proves too confusing
1373 of voluminous, I will display it only when debug level 1
1374 or greater is enabled in the SD.
1376 kes Add enable/disable job=<job-name>. This command prevents
1377 the specified job from being scheduled. Even when disabled,
1378 the job can be manually started from the console.
1379 kes During 'update slots' clear all InChanger flags where the
1380 StorageId is zero (old Media records).
1382 Beta release 1.38.4:
1384 kes Fix autochanger code to strip leading spaces from returned
1385 slots number. Remove bc from chio-changer.
1386 kes Back port a bit of 1.39 crypto code to reduce diffs.
1387 kes Fix first call to autochanger that missed close()ing the
1388 drive. Put close() just before each run_program(). Fixes
1391 kes Add PoolId to Job record when updating it at job start time.
1393 kes Pull in more code from 1.39 so that there are fewer file
1394 differences (the new ua_dotcmds.c, base64.h, crypto.h
1395 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1396 util.c. Aside from ua_dotcmds.c these are mostly crypto
1398 kes Implement new method of walking the jcr chain. The
1399 incr/dec of the use_count is done within the walking
1400 routines. This should prevent a jcr from being freed
1401 from under the walk routines.
1406 kes Start implementing Verify list output.
1407 kes Move the suitable_drive flag to a better place to prevent
1408 premature termination of the reservation if all drives
1409 are busy -kes should fix Arno's diff/inc pool failures.
1411 kes Add mutex to single thread VSS code in Win32.
1413 kes Simplify code in askdir.c that waits for creating an appendable
1414 volume so that it can handle multiple returns from the wait
1416 kes Modify the wait code to permit multiple returns.
1417 kes Return a zero when 'autochanger drives' is called and
1418 it is not an autochanger.
1419 kes Make rewind_dev() a method taking a DCR as an argument.
1420 This permits closing and reopening the drive if the
1421 rewind fails as happens if the drive was loaded while the
1422 file descriptor was open. This refreshes the file descriptor.
1423 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1424 if the device is open or not. This should eliminate
1426 kes Return error if reserve cannot find at least one suitable device.
1427 kes Make wait_for_sysop() return correct state information.
1428 kes Fix Win32 state file problem. write was not using compat
1429 code. This should fix bug #500.
1431 kes Modify gui on command to set only GUI mode and not batch.
1432 kes Modify .messages command to always print messages regardless
1434 kes If GUI mode is on, suppress automatic printing of
1436 kes Delete old bnet packet code.
1437 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1438 wx-console. -kes not implemented because bconsole must be updated.
1439 kes Modify restore command in wx-console to set gui on and to use
1440 only .messages instead of messages. Hopefully this fixes bug
1442 kes Fix seg fault in exit of acquire when canceling a job --
1443 reported by Wolfgang Denk
1444 kes Pull in latest reservation system changes from 1.38
1445 kes Make .messages command always print messages regardless
1446 of the automessages flag.
1448 kes Fix seg fault if user labels a drive directory bug #513
1449 kes Remove quotes around Version as it breaks things.
1451 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1452 kes Apply sparse code fix for raw drives and fifos. Bug 506
1453 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1455 kes Correct reservation system to do a last ditch try
1456 for any mounted volume, then anyone anywhere.
1457 kes Add quotes around table Version because of
1458 error in MySQL 4.1.15 -kes bug report submitted.
1459 kes Correct some minor problems with btape in the fill
1461 kes Updates to ssh-tunnel from Joshua Kugler.
1462 kes Added a report.pl program from Jonas Bjorklund.
1463 kes Simplify the O_NONBLOCK open() code for tape drives,
1464 and always open nonblocking.
1465 kes Do not wait for open() if EIO returned (shouldn't happen).
1466 kes Eliminate 3 argument to tape open().
1467 kes Correct the slot # edited in the 3995 Bad autochanger unload
1469 kes With -S on bscan (show progress) do not divide by zero.
1471 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1472 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1473 kes Remove unused code in wait_for_device.
1474 kes Make wait_for_device() always return after 60 seconds of wait.
1478 kes Add stubs for non-crypto build.
1480 kes Use localhost if no network configured
1482 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1483 kes Remove debug print.
1484 kes Add bail_out in error during state file reading.
1486 kes Merge changes made to 1.38.3 into HEAD
1487 kes Add stubs for pygtk-console code
1488 kes Create Makefile.in for pygtk-console code
1490 kes Merge updates into 1.38 branch
1491 kes Update specs to include mysql4 define.
1492 kes Fix when attributes are sent, must be after binit().
1493 kes Stop read_record() if status not ok in second loop.
1494 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1495 and partial records in read_record(). This allows bscan
1496 to get FileIndex at EOT correct.
1497 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1499 kes Fix Win32 built to work with new crypto code.
1500 kes Apply patch supplied by user (slightly modified) to fix
1501 correct detection of holes in block devices and FIFOs.
1503 kes Apply patch supplied by user (slightly modified)
1504 to fix SD hang with multiple pools and bad client
1505 IP. Fixes bug # 508.
1507 kes Add nagios plugin to the examples directory. Submitted by
1509 kes Remove warning message about multiple saves of hardlinked files
1510 from find_one.c as it can generate too many warning messages.
1511 kes Modify most restore error messages to be queued so that they
1512 appear at the end of the job rather than mixted with the restore
1513 listing where they could be 'lost'.
1515 kes Reset timeout values before select() per patch from
1516 Frank Sweetser for problems with non-blocking sockets.
1517 kes Unlink the state file if either reading or writing it gets
1518 errors. Hopefully this will fix Win32 exit problems.
1519 kes Add sanity check in append.c to ensure that dcr is not NULL.
1520 This can happen if multiple drive autochanger SCSI control
1521 channel and drive indicies do not correspond.
1523 kes Get next volume from Scratch pool before creating a volume.
1524 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1525 kes Remove argument from create_bacula_database for SQLite as it
1527 kes Add back index code so that two drive autochangers can get
1529 kes Change a bunch of debug levels to aid debugging autochangers.
1530 kes Fix reservation so that mutexes are properly applied.
1531 kes Rework reservation algorithm so that two drives can be used
1534 kes Landon merged his data encription changes into the HEAD
1535 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1536 If this patch is applied, the number of days can be specified with
1537 'list nextvol days=xx'
1539 'status dir days=xx'
1540 My use case is to be able to preview the next scheduled job (and the
1541 next tape to be used) on fridays if there are no scheduled jobs during
1545 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1546 kes Fix malformatted bnet error message that caused seg fault
1548 kes Applied user patch to improve README.vc8 in src/win32.
1550 kes Add Migrate, Copy, Archive Job types (some where there)
1551 kes Correct some more editing of JobId's (for 64 bit compatibility).
1552 kes Ensure that StorageId is stored in Media record when ever possible.
1553 kes Add Migration Job to Job.
1554 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1555 Next Pool to Pool resource.
1556 kes Add more code to mac.c (migration archive copy).
1557 kes Change Start Storage daemon job to require read and write storage
1559 kes Pass read storage data to SD as well as write storage data.
1560 kes Remove old code from winservice.cpp
1561 kes Break on error in scan.
1562 kes Fix typo in signal.c
1563 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1564 kes Cleanup how find_device() works.
1565 kes Add read output to Status in SD.
1568 kes Add red-black btree routines
1570 kes Remove abs() in bfile.c so that it compiles on Solaris.
1573 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1574 kes Fix bnet-server bug found on OpenBSD. Bug #486
1575 kes Fix cancel failure bug. Bug #481
1576 kes Fix failure when Pool name has spaces. Bug #487
1577 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1578 kes Fix a couple of free()s in src/filed/acl.c
1579 kes Fix memory overrun in bfile.c in building OS X resource
1580 fork filename. Bug #489
1581 kes Add Pool name to SD status output.
1583 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1584 kes Make sure to set storage before trying to set drive.
1585 kes Add bacula_mail_summary.sh to examples directory. It makes
1586 a single email summary of any number of jobs. Submitted
1588 kes Make sure when we do a mount to unblock the device even
1589 if the drive could not be opened.
1591 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1592 and correct a few minor problems to make it build on Linux.
1594 kes Remove delete of CVS from all Makefiles
1595 kes Fix seg fault when clicking on Add button in wx-console
1596 restore panel. Bug #470.
1597 kes Fix copyright date and URL typo -kes bug #468.
1598 kes Change autostart install for FreeBSD to look for rc.conf
1599 rather than rc.local as suggested fix for bug #466.
1600 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1601 grant on status. Bug #465
1602 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1603 update script. Bug #464
1604 kes Tweak #ifdefing a bit in new Win32 stream code.
1605 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1606 kes Add documentation of performance #defines
projects / bacula / bacula / blob