1 Technical notes on version 1.39
6 kes Update examples directory.
7 kes Remove unused variable in winservice.cpp
8 kes Make Win32 make command build installer.
10 kes Correct dvd code that breaks tape labeling.
11 kes Implement Enabled on update slots.
13 kes When doing a label, pass the VolBytes back to the Director,
14 which puts it in the catalog.
15 kes Print an error message if the user attempts to prune an
17 kes Need to start using %ld when sscanfing 32 bit values.
19 kes Correct the counting of VolCatBytes for DVDs.
20 kes Add code to mount.c to require that VolCatBytes corresponds to
21 what is actually found when doing an append.
22 kes Update freespace only after writing on the DVD.
23 kes Remove code that blows away the current part in the spool file.
25 kes Apply new dvd-handler patch from Richard Mortimer.
26 kes Tweak so that debug level 20 shows only DVD commands.
27 kes Correct spooled_part flag in dev.c close() so that it is cleared
28 when the spool file is deleted or does not exist.
29 kes Print part number in read_records when eof hit (restore).
31 kes Make find with no args in tree restore return error rather than
32 stopping the selection. Fixes bug #665
33 kes Rework DVD writing to ensure that the last part is written
34 on open_next_part when dealing with a spool file.
35 kes Correct the lseek_dev() routine to handle end point correctly
36 (bug introduced by me).
37 kes Allow part number to exceed num_dvd_parts in lseek_dev().
39 kes Apply dvd-handler patch from Richard Mortimer.
40 kes Apply dvd error check patch from Richard Mortimer.
41 kes Apply bpipe race patch from Richard Mortimer.
42 kes Rework how DVD labels are handled and set append only
43 when part > num_dvd_parts.
45 kes Rework many features of DVD writing and reading. Added many error
46 messages. Most importantly changed part to represent the current
47 part number base zero. This makes current DVD writing incompatible
48 with previous version.
50 kes Add host:port to connect failure messages to FD and SD from Dir.
51 kes Add WhereACL to console ACL list. If nothing is specified, only
52 the default is permitted for restore. Otherwise, *all* allows any
53 path, or you can specify permitted paths. This should allow control
54 over where users can restore files. This is untested.
55 kes Modified message to add a ? (as in loaded?) when querying the autochanger
56 for what Slot is loaded.
57 kes Fixed the use of Slot, so that is more correctly maintained, thus
58 eliminating unneeded duplicate calls to determine what Slot is loaded.
61 kes Install man pages with 'make install'
62 kes wx-console crashes because of differences between Bacula and wxWidgets
63 malloc()/free(). Tweek wx-console to use bmalloc()/bfree() for Bacula
65 kes correct improper indenting in wx-console/console_conf.c
66 kes update wx-console header copyrights
67 kes Fix bug #658 where wx-console mangles file/directory names containing
70 kes Add Media.Enabled flag to client backups for dotcmds.c
71 kes Enforce Media.Enabled=1 for a current restore to work.
72 kes Require restore case 3 to have sqlquery permission to work.
73 kes Remove obsolete del_MAC sql command.
74 kes Ensure that bscan creates Volumes with Enabled=1.
76 Version 1.39.20 beta released:
78 kes Correct missing Client table reference in SQL pointed out by
81 kes Fix Win32 build (new entrypoint, start baculafd).
83 kes Add -n option to bconsole to turn off conio.
84 kes Print JobIds to be migrated in Job Report.
85 kes Add additional user supplied notes to the messages part of
86 bacula-dir.conf concerning multiple email addresses.
87 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
88 kes Add more recent Feature requests to Projects file.
90 kes Apply Maritn's fix to src/win32/Makefile.
91 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
92 kes Implement pruning for Migration and migrated jobs.
93 kes Implement PoolOccupancy migration.
94 kes Implement PoolTime migration.
96 kes If doing a mount, look for a slot, and if specified pass it to
97 the SD so that it can load the autochanger.
98 kes Return DVD=1 flag if a label command is done to a DVD. This
99 permits setting VolParts to 1.
100 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
101 rework ua_label code based on DVD media type to use DVD flag returned.
103 kes Eliminate some compile warnings in dird_conf.c
104 kes Format the bytes field in the terminated jobs part of the status
105 command for the three daemons with suffixes to reduce print size
106 of backup bytes. Suggested by a user.
107 kes When not descending into a directory, print the File= name that
108 triggered it -- makes why not descending a bit clearer.
109 kes Do not unload autochanger when doing a list command -- basic code
110 from Eric Bollengier.
112 kes Fix bug #462 incorrect error message printed when client script called
113 from File= was not found.
114 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
115 do a rewind on Solaris when no tape is in the drive (Solaris does not
116 have the detailed errno found on Linux). Added Solaris specific code.
117 Note, this may apply to other OSes as well.
119 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
120 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
121 fix bug 648 - update sqlite script patches, lock out gnome2console
122 builds for platforms with gtk+ < 2.4.
123 Updated build_rpm.sh - add remote source directory, add switch for
124 signing, refine file names.
125 Updated spec file again for Mandriva build as they have this curious
126 custom of silently converting all manpages to bzip2 format just before
127 the final packaging step.
129 rbn Fixed the Windows Makefiles so that they won't accidently try and
130 pickup binaries for the Unix build. This allows both the Unix
131 build and the Windows build to be built in the same tree without
132 interfering with each other.
133 rbn Fixed error handling and cleaned up mtx-changer.cmd.
134 rbn Added the rest of the database scripts. These are installed but are
135 not yet editted for variable replacement.
136 rbn Broke out the cats functionality from bacula.dll and put into new
137 separate dlls for each database type. At installation time the
138 correct one is copied to bacula_cats.dll.
139 rbn Eliminate the need to install the mysql.dll on client only builds.
140 rbn Moved dird/sql_cmds.c into the cats directory so all the database
141 specific #ifdefs were in the cats directory.
142 rbn Added a new sql_cmds.h with all the declarations for the variables
143 exported from sql_cmds.c.
144 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
145 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
147 kes Correct improperly formated list command output reported by Dan.
149 kes Correct despool time calculation.
151 kes Remove previous changes to compat.cpp as they create problems.
152 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
153 kes Attempt to fix problems with the msg_queue crashing on Solaris
154 when Bacula is terminating, but problems remain.
155 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
156 name editing problems with too many \\?\es.
157 kes Fix some Bacula source code stlye problems in compat.cpp.
158 kes Add debug code to compat.cpp and convert non-Bacula debug code
161 kes Change the name of the technical notes file from kes-1.39 to
162 technotes-1.39. Prefix my messages with 'kes '.
163 kes Allow dequeue_messages() to be called twice. Should fix bug
165 kes Add Job type to bscan Job information output.
167 kes Update copyright date in program files, and for the most part
169 kes Implement %q in bsnprintf.c apparently I forgot it.
171 kes Make disk-changer sed command compatible with FreeBSD.
172 kes Make a first cut at a ReleaseNotes and ChangeLog for a
174 kes Make make clean decend into the src/win32 directory.
175 kes Fix some #ifdefing so that Solaris and FreeBSD compile
176 sys/stat.h was turned off.
177 kes Use suffix editing for new transfer rate messages.
178 kes Attempt to come up with a workaround which seems to be an OS
179 bug where write() returns EBUSY. IMO this should not happen.
180 It triggered in truncatebug test. The workaround retries using
182 kes Eliminate a strerror() call in a class method that failed with
184 kes Use rm -rf rather than rmdir to delete the src/win32/release
185 directory during make clean.
187 kes Make bscan ignore ACL streams.
188 kes Update projects files with new Feature Requests.
189 kes Generate current English and French manuals and upload
191 kes Update the home page to include the new British/French flags to
192 switch between translations. Work done by Alexandre Baron.
193 kes Make disk-changer script print an error message if the changer
194 directory is not defined.
195 kes Create a generic DB routine for getting an int (32/64 bit) from
197 kes Add more migration code.
198 kes Add a few more files to .cvsignore here and there.
199 kes Minor fixes for SD write rate and despooling rate.
200 kes Turn off new test code in src/console.c
204 kes Incremented the version number to signify that all of Robert's code
205 for Win32 that was in the branch is now integrated into the HEAD,
206 and that Eric has submitted code that we hope will provide limited
207 backward compatibility with 1.38 file daemons (more testing to be
209 kes I rationalized a few of the names of the variables (mainly jcr names)
210 that are used during migration as keeping three different jcrs at the
211 same time clear in one's head is not easy.
215 eb Tweak new runscript feature to work with 1.38.x FDs.
216 eb Correct crypto.c to fix segfault when restoring an encrypted stream
217 on fd which don't use rsa keys.
218 eb Add yes/no english keywords on localised yes/no questions.
220 kes Several important commits from Robert Nelson for code cleanup and
222 kes Modify console.c so that when conio is enabled, it converts \n to
223 \n\r before outputting to the console. Hopefully this will fix
224 the problems with expect in Perl that Eric saw.
226 kes Change cats/sql.c to elimate %-*s format, which I think is turned
228 kes Add Comment field to llist of a volume.
229 kes Allow true/false in some yes/no questions.
230 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
231 kes Remove a few /n's when scanning commands from another daemon. This
232 permits adding additional fields later.
233 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
234 kes Update README.mingw
236 kes Tweak authentication to work with 1.38.x FDs.
237 kes Tweak catalog make scripts.
238 kes Fix catalog upgrade scripts so that they work.
239 kes Correct despooling debug code to eliminate race condition.
241 kes Add additional fields as specified by Arno to LocationLog.
242 kes Add comment field to the Media record.
243 kes Add Time field to the Log record.
244 kes Correct migration SQL (thanks to Bill Moran) so that it
245 runs with PostgreSQL also.
246 kes Add spooling/despooling info in status output of SD.
248 kes Spend a lot of time integrating mkcdrec with the rescue disk.
249 kes Add VOLMGMT message class for volume management messages (none yet).
250 kes Add CATALOG as a destination. It goes into the LOG table.
251 kes Implement the Log table in the DB.
252 kes Implement the Location Log table in the DB (for user use).
253 kes At Eric's request add a run_scripts() just after blast_data in
256 kes Add Enabled column to Location, correct some typos in DB schemas.
257 kes Correct bug I introduced into RunScripts enum.
258 kes Add log table to Catalog
259 kes Purge original job migrated if the migration terminates normally.
260 kes Cleanup purging of files/jobs so that it is done only in a
262 kes Add new VOLMGMT message class.
263 kes Add Catalog message destination (user conf code remains to be written).
265 kes Modify read_record and friends to properly deal with migration
267 kes Update debug code in read_record.
269 ======================= Warning ==========================
270 Separate read and write storage in Jobs in the Director. This
271 is a major rewrite of some of the low level code and hence has
272 a high probability of introducing bugs.
273 ==========================================================
275 kes Move the job init code up to *before* the job is put into
276 the job queue (resource allocation queue). This permits the
277 job to establish whether it will read or write or do both.
278 kes Add name() methods to all the resource classes.
279 kes Implement separate read and write storage resource
280 allocation/deallocation in jobq.c
282 ======================= Warning ==========================
283 Implemented new method of getting the default Storage from the Media
284 record rather than from the MediaType for restore. As a fall
285 back, if no Storage is defined, use the MediaType. This
286 eliminates most all prompts if there are multiple MediaTypes
287 used. This is an important and fundamental change.
288 ==========================================================
290 kes Add more detail (Storage, Device) to list of volumes printed
292 kes More code in migrate. In particular start multiple jobs if
294 kes Probably overkill, but ensure that the bsr is unique even within a
296 kes Rework bsys.c drop() so that it now should work as expected.
297 kes Update a bunch of old copyrights -kes particularly in .h files.
298 kes Remove src/lib/bshm.c/h
302 ======================= Warning ==========================
303 All hash codes in the database are now kept in world
304 compatible base64 format (no = filling). This means that
305 all FileSets will be updated and if you are running
306 verify jobs, you must do an InitCatalog.
307 Authentication uses the new algorithm, but should be
308 backward compatible with 1.38.x
309 ===========================================================
311 kes Modify the authentication routines so that the 1.39.15 Director
312 always runs with the compatible binary to base64 code (same as
313 the rest of the world). It will however detect if an SD or
314 FD is running the old code and if that is the case, will use
315 the old algorithm for authentication. However, all consoles must
316 use the compatible algorithm, and all data entered into the database
317 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
318 use the compatible algorithm.
319 kes Rename the cram_md5 routine names to be slightly more appropriate
320 to what they are doing (challenge and respond).
321 kes Robert committed his #ifdef and header cleanup.
323 kes Fix a complier warning in files/backup.c
324 kes Cleanup NOT NULL vs DEFALT 0 in database creation.
326 kes Robert committed his low impact changes.
327 kes I removed a size_t from the jcr.h definition.
328 kes Update the tape regression scripts (still to be tested).
329 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
330 kes Require done or quit to exit from in memory tree restore.
332 kes Write install/uninstall of new manpages. There are now a
333 pile of man pages. Some of which need a lot of work.
335 ======================= Warning ==========================
336 The --mandir ./configure option now points to the top level
337 man directory. The man files will be installed under
338 mandir/man8 and mandir/man1 as appropriate.
339 ==========================================================
341 kes Add complete text of GPL to LICENSE.
342 kes Implement job report that indicates where Storage and Pool
343 came from -kes with overrides and Pool storage and NextPool,
344 it is all very complicated.
345 kes Create a few common subroutines for backup.c and migrate.c
346 kes Eliminate warning messages from tray-monitor.c
348 kes Apply fix for scheduler for missing unlock_jobs().
349 kes Clean out autoconf caches before rebuilding configure
350 kes Fix the FreeBSD pthreads lib define updated by Dan.
351 kes Add missing semicolon in src/console/console.c
352 kes Add Robert's enhanced version of build-win32-cross-tools
353 as well as his patch file.
354 kes Note, the new gcc options are likely to break building of
355 wx-console or the tray-monitor ...
357 kes Implement Robert's suggestion to suppress printing compile lines.
358 kes Detect GCC correctly (I hope)
359 kes If using GCC (actually g++) add the following compiler flags
360 -fno-strict-aliasing -fno-exceptions -fno-rtti
362 ===================== Warning =============================
363 Turn on new bsnprintf() code. This could cause print output
365 ===========================================================
367 kes Fix crypto when not using openssl. I previously overlooked this.
368 kes Eliminate crypto type punning problems by eliminating void * and
369 using uint8_t * instead.
370 kes Harden authentication failure in FD by single threading errors
371 and forcing a 6 second wait.
373 ===================== Warning =============================
374 Removed "Accept Any Volume" directive.
375 ===========================================================
377 kes Major cleanup and simplification of regress using shell functions
378 (more tests to be converted to new format)
379 kes Add detection of 64 bit Irix as indicated by user.
380 kes Increment catalog database id from 9 to 10.
381 kes Add a few of the new database fields to the various C++
383 kes Implement code to fill in the most important new fields (e.g.
385 kes Ensure that most of the new fields are in create/get/insert/update.
386 More work to be done.
388 kes Update some very old licenses in src/cats.
389 kes Modify the database format for handling Migration jobs:
390 Add PriorJobId, RealEndTime to Job table
392 Remove Stripe from JobMedia record (not used, wasting space)
393 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
394 Add Cost to Location table.
395 kes Delete mac_record subroutines.
396 kes Add new table values to create/update/get routines as appropriate.
397 kes Update the update_tables and make_tables scripts.
398 kes Make a first cut in using a union where multiple pointers (actually
399 pointers to pointers) are stored.
400 kes Make some changes to base64.c suggested by Robert and others and add
401 a small amount of documentation.
402 kes Add some changes suggested by Peter for Solaris (bregex...)
403 kes Make runscript.h always built because it needs to be pulled into
404 more places. In particular its RES was left out of a union.
405 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
406 This makes it slightly easier to detect uninitialized variables.
408 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
409 sometimes creates install problems.
410 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
411 Nelson's code. More to do.
412 kes Convert a few store_bit to store_bool in filed_conf.c.
413 kes DVD tweak to block.c as supplied by Uwe Muessel.
415 kes Modify configure.in to check for typeof().
416 kes In findlib/attribs.c use typeof instead of templates if possible.
418 kes Implement partial error messages for src/filed/acl.c
419 kes Fix return code to fail when doing update barcodes and
420 Pool resource is not found. This previously caused Volumes
421 to be labeled as cleaning tapes.
422 kes Small updates to projects.
424 kes Add Eric Bollengier patch for new RunScript directive. It breaks
425 compatibility between dird and fd.
427 kes Prevent DVD code from rewriting label if the device cannot be
429 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
430 fix Debian build bug.
431 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
432 kes Integrate manpages contributed by Jose Luis.
433 kes Update projects file.
434 kes Add manpages Makefile.in to configure.in
435 kes Remove installation of bacula.8 in scripts directory.
437 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
439 O_NOATIME is a open() flag which makes it possible to read a file without
440 updating the inode atime (and also without the inode ctime update which
441 happens if you try to set the atime back to its previous value). It also
442 prevents a race condition when two programs are reading the same file, but
443 only one does not want to change the atime. It's most useful for backup
444 programs and file integrity checkers (and bacula can fit on both
447 Recent versions of the Linux kernel and glibc have support for it (the
448 glibc support being mostly copying the O_NOATIME definition to
449 bits/fcntl.h). If there's no support for it on the kernel, trying to use
450 it does nothing (since the kernel ignores unknown flags).
452 If the kernel has support for it, trying to use it either works, fails
453 silently (mostly in remote filesystems), or returns errno=EPERM (if you
454 are not either the owner of the file or root). A simple way to prevent the
455 failure is to open the file without the flag and set it later with
456 fcntl(F_SETFL), ignoring any EPERM errors.
457 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
458 of restarted jobs to complete (due to a destroyed pthreads conditional
459 variable used by the message thread).
460 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
462 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
463 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
464 colons in query.sql file.
465 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
466 not to create orphans.
467 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
468 in restore long listing.
469 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
470 of incorrect MarkedId.
471 kes Apply patch from adioso bug #616 to correct text in manual (replace
472 Director with File daemon).
473 kes Rework a few of the zlib changes so that they build properly.
476 kes Move DIR "run" command to SD before starting the message thread
477 as suggested by Cristopher Hull to avoid a race deadlock from
478 two threads using the bsock structure.
479 kes Modify LICENSE to correct some problems pointed out by Debian.
481 kes Correct EOF with no \n lex.c problem.
482 kes Tweak compat.h compat.cpp and merge with apcupsd
483 kes Add additional INFO messages if autochanger cannot be used.
486 kes Simplify Win32 Makefile
487 kes Correct count of buffers/bytes used by smartall.c
488 kes Updated compat.h after porting apcupsd to MinGW.
490 kes Work on getting wx-console building on MinGW. wxWidgets now builds
491 started adding Makefile ...
492 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
494 kes Reloading a bad configuration file doesn't kill director any more.
495 Thanks to fix from Eric Bollengier.
497 kes Fix problem of accents with new Win32 code.
498 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
499 works in the MinGW build with the exception that there
500 is a problem with accented characters -kes i.e. there is
501 some mapping problem with wide characters.
502 kes The code no longer compiles with Microsoft VC++.
504 kes Start implementing Christopher's St.Bernard code.
505 kes Add Christopher's mods for opening files.
506 kes Strip \r \n from Win32 error messages (Christopher)
507 kes Add more info about Win32 system if unknown (Christopher)
508 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
509 kes Fix a number of incorrect strings marked for translation, when
510 they should not be (e.g. commands).
511 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
512 Patches supplied by user in bugs #608 and #599.
513 kes Use most recent of st_ctime and st_mtime in restore tree DIR
514 listing. This fixes some problems with Win32 printing incorrect
516 kes Correct the clock shift comm time calculation between the DIR
517 and the FD. It was added rather than subtracted.
518 kes Strip all backslashes in filenames to be restored on Win32
519 machines -kes the names should all be in Unix format, and if
520 there are any backslashes it is most likely due to an improper
521 FileSet definition, and the files will not otherwise be
523 kes Remove lib/regex.c (replaced by bregex.c).
524 kes Delete src/win32/License.txt
525 kes Modify installer to install LICENSE
527 kes Fix bug in build-win32-cross-tools script reported by Howard
528 kes Implement cross compiled bconsole
530 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
531 kes Write first cut of README.mingw32
532 kes Add back ua_label barcode fix from Rufolf Cejka.
533 kes Integrate the majority of the Mingw cross-tools submission
534 made by Howard Thomson. Everything compiles, with zlib, openssl,
535 and VSS turned off. Linking needs a pthreads library ...
537 kes Add 'Dir Status' button to the gnome console.
538 kes More work on migration.
539 kes Restore non-compatible base64 coding to permit compatibility.
540 kes Display heap stats in Storage daemon without debug level.
542 kes Integrate most of the MinGW changes -kes more to do.
544 kes Implement using pg_config for finding PostgreSQL files.
545 Fixes bug #600. Patch supplied by user.
546 kes Remove -t option from mktemp in mtx_changer.in and use
547 working directory. Fixes bug #578.
548 kes Update job start time after the any run before job so that
549 files created by the script are only backed up once. Fixes
551 kes Strip trailing newline only from filenames entered in
552 the restore command when reading a file. This permits
553 the user to enter filenames with trailing spaces. Fixes
554 bug #549. The user supplied a patch that I modified slightly.
555 kes Use the most recent time (st_mtime, st_ctime) in the dir
556 command in restore. This gives the user a better idea of what
557 the newest file really is. This fixes bug #574. The fix
558 was suggested by the user.
559 kes Implement a compatible version of base64. This permits external
560 programs to duplicate Bacula's base64 algorithm using standard
561 routines. This fixes bugs #296, and 565. Patch submitted by
563 ================= Note ========================
564 Previous Signatures stored in the database are no longer
565 compatible with this. The main downside is for Verify jobs,
566 and doing an InitCatalog run will fix the problem. Also, the
567 authentication between the deamons is changed, so all daemons
568 must be simultaneously upgraded.
569 ==============================================
570 If you don't like this fix, set:
571 const bool compatible = true;
573 const bool compatible = false;
576 kes Ensure that DB signature is never NULL.
577 kes Ensure that DB table names are not translated.
578 kes Fix scheduler to handle time skew (eg daylight savings).
579 kes Fix scheduler to use lock_jobs() to avoid most problems
580 with reload. Window is now milliseconds.
582 kes Apply patch from Christopher Hull
583 kes Allow multiple connections to database with different
585 kes Invalidate the scheduler when doing a reload. Fixes seg
586 fault, but still 60 second window.
587 kes Additional info in Reschedule message.
588 kes Use set_jcr_job_status() everywhere to prevent loss of
590 kes Display peer IP in FD if error from connecting DIR.
591 kes Don't increment file count for DIRBEGIN.
592 kes Replace illegal characters in Win32 filename by _.
593 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
594 kes Hash hard link filenames rather than linked list.
595 kes Fix for security failure in chdir on Win32.
596 kes Add CreateDirectoryA/W win32 API entry points.
597 kes Add /silent option to Win32 FD for Install/Remove service.
598 kes Always print Heap statistics in FD.
600 kes Remove the -f option from the chown in Makefile.in for more
602 kes Change setting the group in Makefile.in to use chgrp for
604 kes Implement a write_store and read_store to replace
605 dirstore in reserve.c
606 kes Implement a Bacula read/write lock for Python rather
607 than using the Python lock to avoid recursive problems.
608 kes Correct the uninstall directory names in filed/Makefile.in
609 as reported by a user.
611 kes Correct some problems with database creation (new tables).
612 kes Replace a bunch of old 0x%x by %p.
613 kes Get first cut of Migration with Job selection working.
615 kes Change store_bit() to store_bool() for the Spooling in
616 dird_conf.c -kes bug reported by Robert Nelson.
618 kes Correct Makefile bug found by Dan Langille.
620 kes Correct Makefile for Solaris /bin/sh
621 kes Correct mtx-changer.in for Solaris /bin/sh
622 kes Abort if a conf resource does not have a Name =
624 kes Change the name of the regex program to bregex.
625 kes Add the bwild program to the tools directory. It is similar
626 to the bregex program.
627 kes Implement create bregex.h and bregex.c in src/lib from the
628 Python regexp program.
629 kes Use the new bregex.c to implement Regex expressions on Win32.
631 kes More work on migration.
632 kes Implement wild program in tools directory for testing
633 wild-cards. Almost identical to the regex program.
634 kes Up port VSS single thread locking code.
635 kes Replace N_(..) by NT_(...) to inhibit translation of
637 kes Modify Makefile to change the permissions on Working Directory
638 to 770 if the directory is created.
639 kes Do not fail the Makefile if changing the permissions or
640 owner/group on WorkingDir fails.
641 kes Remove early selection of Scratch Volumes in the recycling
643 kes Correct the old recycling algorithm so that Scratch Volumes
644 are selected when looking for a Volume in the changer.
645 kes Correct a typo in the Verify SQL reported by Joe Park.
647 kes Remove automatic case folding on Windows FDs. You must
648 explictly use the 'Ignore Case = yes' option.
649 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
650 scratch volume in an Autochanger early in the 'recycling'
653 kes Make weof() and clrerror() methods of class DEVICE.
655 kes Tweak license to include Microsoft restrictions.
656 kes Move mysql.reconnect to after real_connect(). Thanks to
657 Frank Sweetser for the patch.
658 kes Disallow a backslash in a File = directive (Windows junk)
659 unless the string is quoted.
660 kes Apply Eric's patch to ua_label.c so that daemon protocol
662 kes Add NT_ definition for strings that should not be translated.
663 kes Apply NT_() to ua_label.c
664 kes Remove timed wait for VSS on Win2K3 as it is not yet
666 kes Correct bacula.in script to reference bacula-ctl-xx in the
667 sysconfig directory rather than the bin directory.
669 kes Fix a long standing bug in the bacula start/stop scripts.
670 kes Attempt to add the new bacula-ctl-* files to the rpm.
671 kes Switch to using typeof() for list traversing to avoid
672 as many FC5 g++ compiler warnings as possible.
674 kes Split the bacula start/start script into four files:
675 bacula -kes starts and stops calling other scripts
676 bacula-ctl-dir -kes starts/stops the director
677 bacula-ctl-fd -kes starts/stops the File daemon
678 bacula-ctl-sd -kes starts/stops the Storage daemon
680 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
681 kes Correct editing of JobId from int to int64 in fd_cmds.c
682 kes Eliminate FileSet name race with bash_spaces() and multiple
683 threads by bashing in a local.
684 kes Fix error return from 'use storage' to print a correct error
685 message rather than nothing.
686 kes Correct false re-read last block error message when two jobs
687 are simultaneously writing at the end of a tape.
688 kes Simplify exit conditions in the reserve.c code to avoid
689 possible non-release of reservation_lock().
690 kes Suffle lock order in reserve to avoid deadlock between
691 reservation lock and device mutex.
693 kes Initialize jcr mutex before first use. Thanks to Thorsten for
694 tracking this down for me !!!! as it broke the Win32 build.
696 kes Integrate addition of line count limitation to bsmtp -l from
697 Sebastian Stark <stark at tuebingen.mpg.de>
699 kes Implement regex test program in tools directory.
700 kes Attempt to fix time problem with bsmtp with foreign langs.
701 kes Add strip_trailing_newline() submitted by user.
702 kes Implement regex matching in migrate.c
704 kes Fix bug #537 to allow arbitrary time to mount a volume for
705 restore, if polling is turned on.
706 kes If dir_user or dir-group is specified in ./configure apply it to
707 the working-dir. Fixes bug #533.
708 kes If rescheduling a job cancel the previous incarnation with the SD.
709 Fixes bugs #566 and 557.
710 kes Fix bug #567 do_message() definition type conflict.
713 kes Add more jcr methods and make mutex and use_count private.
714 kes Create lock/unlock methods for jcr.
715 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
716 records to get to seek position.
717 kes Integrate patch from bug #561 to correct conio.c signal definitions.
718 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
719 terminates correctly by doing pthread_kill(). Do not destroy
720 SD cond wait variable between executions of the job. Use local
721 mutex for cond variable to avoid blocking jcr chain. Fix poor
722 use of jcr use count in jobq.c for restarted jobs.
723 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
724 lib/jcr.c -kes prevents locking the jcr chaing.
725 kes Apply patch from bug #564, which corrects listing volumes with
726 multiple autochangers. Apply same fix to next volume list.
727 kes Fix bug #562 where restore bootstrap file is not unique.
728 kes More details in implementing David's migration syntax proposal.
729 kes Save and restore dcr when swapping drives so that if we have
730 a write dcr it is not lost.
731 kes Use new routine lock_reservations() to lock the reservations
732 system, and call it while looking for a volume in askdir.c.
733 This could possibly fix bug #543.
734 kes Stop SD command loop if job is canceled.
737 kes Remove old code from findlib/create_file.c
738 kes Rename mac.c migrate.c
739 kes Add user friendly display of VolBytes in job report.
740 kes Rename target... to previous... to make it a bit easier to
742 kes Add selection type and selection pattern to Migration (idea
743 given by David Boyes).
746 kes The po files should now be current.
747 kes Fix new sql_use_result() code to properly release the
748 buffers in all cases.
749 kes Use the keyword ujobid to mean the unique job id; job or jobname
750 to mean the Job name given on the Name directive, and jobid to
751 be the numeric (non-unique) job id.
752 kes Allow listing by any of the above.
753 kes Add the user friendly job report code for reporting job elapsed time
754 and rates with suffexes from John Kodis <kodis at comcast.net>.
755 kes Add Priority and JobLevel as Python settable items.
756 kes Use TEMPORARY table creation where the table is created by
758 kes Add new code submitted by Eric for waiting on specific jobid.
759 kes Add ACL checking for the dot commands.
760 kes Fix restore of writable FIFOs.
761 kes Fix a bug in bpipe where the string was freed too early.
763 kes Modify the Python class examples to inherit object -kes new way
764 of defining classes. Patch from Felix Schwarz.
765 kes Implement jobuid to replace old usage of job in keywords as
766 suggested by Eric Bollengier.
767 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
768 wait (wait for all jobs to stop)
770 wait jobuid=unique id
772 kes Implement write variables for Python to set Priority (anytime), and
773 Job Level, only during JobInit event.
775 kes Fix the block listing bug pointed out by Arno.
776 kes Update the po files at Eric's request.
778 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
779 accept time qualifiers.
780 kes Make catalog respect ACL.
781 kes Add recycle count to Media record.
783 Changes to 1.39.6-beta1 24Feb04
785 kes Add Rudolf Cejka's new rc-chio-changer.
786 kes Implement pulling Volume from Scratch Pool if the
787 Volume is in the autochanger.
788 kes Implement additional command arguments for update Volume.
792 kes Back port changes to 1.38.5
793 kes Fix recycle SQL for StorageId.
794 kes Fix misplaced quote in mtx-changer script.
796 kes Note. Your database must be updated, or you must create
797 a new database. I have not yet incremented the database level.
798 kes Add Location table.
799 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
801 kes Implement create/get mac record in database for adding extended
802 Migration data to the job record.
803 kes Add new MAC table to update/make database scripts.
804 kes Return Storage name used when getting VolumeNames for a job.
805 kes Change bsr file keyword Storage to Device, which is more accurate.
806 kes Ensure that Mac records are pruned/purged.
807 kes Tweak SD tools to deal with changing media type.
808 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
809 kes Pass pointer to dcr pointer to acquire_device_for_read() so
810 that the subroutine can switch devices, and hence dcrs.
811 kes Modify the multiple MediaType read code to re-use the same
812 dcr when switching devices. This makes the code much more
814 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
815 from a table for restore.
816 kes Add Storage name to VolParams, but it really should be Device.
818 kes Add disk-changer to scripts directory + configure/Makefile
819 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
820 kes Implement store_bit scanner to replace store_yesno. Mostly done.
821 kes Implement new store_bool that stores in a bool.
822 kes Add true/false to yes/no conf directives.
823 kes Make first cut at changing appropriate store_yesno to store_bool.
824 kes Complete implementation of Pool storage devices.
825 kes Move starting clones to job.c
826 kes Move create_restore_bootstrap_file() to job.c
827 kes Make copy_storage() more general to be able to handle
829 kes Cleanup a lot of migration code for manual running, including
831 kes Move getting a scratch Volume into a subroutine.
832 kes Make all places a Volume that is added to a pool to
834 kes Fix bug in autochanger recycle code (improper edit 64 bit).
835 kes Fix segfault in restore command when no value specified.
836 kes Start adding code to handle multiple MediaTypes in restore.
837 kes Eliminate race condition in getting Volume name for
838 two drive autochanger.
839 kes More debug code in autochanger.
840 kes Add storage keyword to bootstrap file, add parsing.
841 kes Move slot in bsr file into Volume record as there will be
842 a different slot for each Volume.
845 kes Implement Pool storage overrides.
847 kes Implement first cut of Migration.
848 kes Implement mysql_use_result() from patch by Karl Hakimian.
849 This reduces significantly the memory consumption during
850 the restore tree building, and hence runs faster too.
851 kes Implement StorageId patch supplied by user (reggie) in bug
852 #536. This should permit Bacula to work correctly with two
854 kes Implement Job listing variations suggested by a user.
855 kes Move updating bootstrap code in backup.c to subroutine
856 update_bootstrap_file().
857 kes Add new job status elapsed time and bytes written user
858 friendly job report output patch sent by John Kodis
859 <kodis at comcast.ne>.
860 kes Implement a storage list in Pools.
861 kes Separate out setup_job() code from run_job().
862 kes Get migration working -kes lots of changes in mac.c in both
864 kes Apply patch from user (Eric Bollengier I think) that fixes a
865 DIR crash when no arguments are supplied to a dot command.
866 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
867 kes Fix command arg name->volume in label command of gnome-console.
868 kes Fix SD acquire.c to release correct DCR by explicitly testing
869 on the dcr address rather than trying to devine if it is a read
870 or write dcr. This failed in error conditions when the device was
874 kes Apply user supplied patch for more readable rate output
876 kes Continue implementing migration.
877 kes Implement support for removable filesystems in SD.
878 kes Ensure that btraceback scripts can be read by anyone.
879 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
880 kes Correct bug where canceling restore before the FD contacts
881 the SD causes the drive to be left in read mode.
882 kes Move ofline_or_rewind into DEVICE::close().
883 kes Eliminate close_device.
884 kes Convert several dev subroutines to methods (e.g. bsf,
886 kes Eliminate force_close_device().
887 kes Implement Device Type directive in Device resource that
888 can have values File, Tape, Fifo, DVD, or Prog.
889 kes Add has_cap() method to Device.
892 kes Add patch from bug #527 to allow RedHat user to specify
893 options/user/group for starting each daemon in
896 kes Add two new queries to query.sql provided by Arno. One
897 list volumes known to the Storage device, and the other
898 lists volumes possibly needing replacement (error, ...).
900 kes Add periodic (every 24 hours) garbage collection of memory
901 pool by releasing free buffers.
903 kes Correct bug counting sized (for display only) in smartall.c
904 kes Print FD mempool stats if debug > 0 rather than 5.
906 kes Make db_lock() mutex error fail the job rather than abort
907 Bacula. Canceling the job caused the mutex to fail.
908 kes Correct bug in alist.c that re-allocated the list if the
909 number of items goes to zero.
910 kes Move the reservation system thread locking to the top level
911 so that one job at a time tries all possible drives before
913 kes Implement a reservation 'fail' message queue that is built
914 and destroyed on each pass through the reservation system.
915 These messages are displayed in a 'Jobs waiting to reserve
916 a drive' list during a 'status storage='. Note, multiple
917 messages will generally print for each JobId because they
918 represent the different problems with either the same drive
919 or different drives. If this output proves too confusing
920 of voluminous, I will display it only when debug level 1
921 or greater is enabled in the SD.
923 kes Add enable/disable job=<job-name>. This command prevents
924 the specified job from being scheduled. Even when disabled,
925 the job can be manually started from the console.
926 kes During 'update slots' clear all InChanger flags where the
927 StorageId is zero (old Media records).
931 kes Fix autochanger code to strip leading spaces from returned
932 slots number. Remove bc from chio-changer.
933 kes Back port a bit of 1.39 crypto code to reduce diffs.
934 kes Fix first call to autochanger that missed close()ing the
935 drive. Put close() just before each run_program(). Fixes
938 kes Add PoolId to Job record when updating it at job start time.
940 kes Pull in more code from 1.39 so that there are fewer file
941 differences (the new ua_dotcmds.c, base64.h, crypto.h
942 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
943 util.c. Aside from ua_dotcmds.c these are mostly crypto
945 kes Implement new method of walking the jcr chain. The
946 incr/dec of the use_count is done within the walking
947 routines. This should prevent a jcr from being freed
948 from under the walk routines.
953 kes Start implementing Verify list output.
954 kes Move the suitable_drive flag to a better place to prevent
955 premature termination of the reservation if all drives
956 are busy -kes should fix Arno's diff/inc pool failures.
958 kes Add mutex to single thread VSS code in Win32.
960 kes Simplify code in askdir.c that waits for creating an appendable
961 volume so that it can handle multiple returns from the wait
963 kes Modify the wait code to permit multiple returns.
964 kes Return a zero when "autochanger drives" is called and
965 it is not an autochanger.
966 kes Make rewind_dev() a method taking a DCR as an argument.
967 This permits closing and reopening the drive if the
968 rewind fails as happens if the drive was loaded while the
969 file descriptor was open. This refreshes the file descriptor.
970 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
971 if the device is open or not. This should eliminate
973 kes Return error if reserve cannot find at least one suitable device.
974 kes Make wait_for_sysop() return correct state information.
975 kes Fix Win32 state file problem. write was not using compat
976 code. This should fix bug #500.
978 kes Modify gui on command to set only GUI mode and not batch.
979 kes Modify .messages command to always print messages regardless
981 kes If GUI mode is on, suppress automatic printing of
983 kes Delete old bnet packet code.
984 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
985 wx-console. -kes not implemented because bconsole must be updated.
986 kes Modify restore command in wx-console to set gui on and to use
987 only .messages instead of messages. Hopefully this fixes bug
989 kes Fix seg fault in exit of acquire when canceling a job --
990 reported by Wolfgang Denk
991 kes Pull in latest reservation system changes from 1.38
992 kes Make .messages command always print messages regardless
993 of the automessages flag.
995 kes Fix seg fault if user labels a drive directory bug #513
996 kes Remove quotes around Version as it breaks things.
998 kes Merge in Aleksandar Milivojevic's mods to the spec file.
999 kes Apply sparse code fix for raw drives and fifos. Bug 506
1000 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1002 kes Correct reservation system to do a last ditch try
1003 for any mounted volume, then anyone anywhere.
1004 kes Add quotes around table Version because of
1005 error in MySQL 4.1.15 -kes bug report submitted.
1006 kes Correct some minor problems with btape in the fill
1008 kes Updates to ssh-tunnel from Joshua Kugler.
1009 kes Added a report.pl program from Jonas Bjorklund.
1010 kes Simplify the O_NONBLOCK open() code for tape drives,
1011 and always open nonblocking.
1012 kes Do not wait for open() if EIO returned (shouldn't happen).
1013 kes Eliminate 3 argument to tape open().
1014 kes Correct the slot # edited in the 3995 Bad autochanger unload
1016 kes With -S on bscan (show progress) do not divide by zero.
1018 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1019 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1020 kes Remove unused code in wait_for_device.
1021 kes Make wait_for_device() always return after 60 seconds of wait.
1025 kes Add stubs for non-crypto build.
1027 kes Use localhost if no network configured
1029 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1030 kes Remove debug print.
1031 kes Add bail_out in error during state file reading.
1033 kes Merge changes made to 1.38.3 into HEAD
1034 kes Add stubs for pygtk-console code
1035 kes Create Makefile.in for pygtk-console code
1037 kes Merge updates into 1.38 branch
1038 kes Update specs to include mysql4 define.
1039 kes Fix when attributes are sent, must be after binit().
1040 kes Stop read_record() if status not ok in second loop.
1041 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1042 and partial records in read_record(). This allows bscan
1043 to get FileIndex at EOT correct.
1044 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1046 kes Fix Win32 built to work with new crypto code.
1047 kes Apply patch supplied by user (slightly modified) to fix
1048 correct detection of holes in block devices and FIFOs.
1050 kes Apply patch supplied by user (slightly modified)
1051 to fix SD hang with multiple pools and bad client
1052 IP. Fixes bug # 508.
1054 kes Add nagios plugin to the examples directory. Submitted by
1056 kes Remove warning message about multiple saves of hardlinked files
1057 from find_one.c as it can generate too many warning messages.
1058 kes Modify most restore error messages to be queued so that they
1059 appear at the end of the job rather than mixted with the restore
1060 listing where they could be "lost".
1062 kes Reset timeout values before select() per patch from
1063 Frank Sweetser for problems with non-blocking sockets.
1064 kes Unlink the state file if either reading or writing it gets
1065 errors. Hopefully this will fix Win32 exit problems.
1066 kes Add sanity check in append.c to ensure that dcr is not NULL.
1067 This can happen if multiple drive autochanger SCSI control
1068 channel and drive indicies do not correspond.
1070 kes Get next volume from Scratch pool before creating a volume.
1071 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1072 kes Remove argument from create_bacula_database for SQLite as it
1074 kes Add back index code so that two drive autochangers can get
1076 kes Change a bunch of debug levels to aid debugging autochangers.
1077 kes Fix reservation so that mutexes are properly applied.
1078 kes Rework reservation algorithm so that two drives can be used
1081 kes Landon merged his data encription changes into the HEAD
1082 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1083 If this patch is applied, the number of days can be specified with
1084 "list nextvol days=xx"
1086 "status dir days=xx"
1087 My use case is to be able to preview the next scheduled job (and the
1088 next tape to be used) on fridays if there are no scheduled jobs during
1092 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1093 kes Fix malformatted bnet error message that caused seg fault
1095 kes Applied user patch to improve README.vc8 in src/win32.
1097 kes Add Migrate, Copy, Archive Job types (some where there)
1098 kes Correct some more editing of JobId's (for 64 bit compatibility).
1099 kes Ensure that StorageId is stored in Media record when ever possible.
1100 kes Add Migration Job to Job.
1101 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1102 Next Pool to Pool resource.
1103 kes Add more code to mac.c (migration archive copy).
1104 kes Change Start Storage daemon job to require read and write storage
1106 kes Pass read storage data to SD as well as write storage data.
1107 kes Remove old code from winservice.cpp
1108 kes Break on error in scan.
1109 kes Fix typo in signal.c
1110 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1111 kes Cleanup how find_device() works.
1112 kes Add read output to Status in SD.
1115 kes Add red-black btree routines
1117 kes Remove abs() in bfile.c so that it compiles on Solaris.
1120 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1121 kes Fix bnet-server bug found on OpenBSD. Bug #486
1122 kes Fix cancel failure bug. Bug #481
1123 kes Fix failure when Pool name has spaces. Bug #487
1124 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1125 kes Fix a couple of free()s in src/filed/acl.c
1126 kes Fix memory overrun in bfile.c in building OS X resource
1127 fork filename. Bug #489
1128 kes Add Pool name to SD status output.
1130 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1131 kes Make sure to set storage before trying to set drive.
1132 kes Add bacula_mail_summary.sh to examples directory. It makes
1133 a single email summary of any number of jobs. Submitted
1135 kes Make sure when we do a mount to unblock the device even
1136 if the drive could not be opened.
1138 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1139 and correct a few minor problems to make it build on Linux.
1141 kes Remove delete of CVS from all Makefiles
1142 kes Fix seg fault when clicking on Add button in wx-console
1143 restore panel. Bug #470.
1144 kes Fix copyright date and URL typo -kes bug #468.
1145 kes Change autostart install for FreeBSD to look for rc.conf
1146 rather than rc.local as suggested fix for bug #466.
1147 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1148 grant on status. Bug #465
1149 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1150 update script. Bug #464
1151 kes Tweak #ifdefing a bit in new Win32 stream code.
1152 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1153 kes Add documentation of performance #defines
projects / bacula / bacula / blob