1 Technical notes on version 1.39
5 kes Start applying new FSFE copyright.
7 kes Add additional error messages in acquiring a drive for read.
8 kes Make WritePartAfterJob the default so that the last DVD part
9 always gets written to the DVD by default.
10 kes Add additional error messages in migration.
11 kes Suppress redundant error messages in migration (possibly more to do).
12 kes Apply Martin's fix (updated to 1.39) that takes into account
13 run storage overrides in the Director status display.
14 kes Implement, but turn off the submitted code that sets the EOT
15 model on FreeBSD machines. Turning on this code is too risky at
16 this point in the development.
18 kes Implement unique dbid routine for migration to prevent the same
19 JobId from being migrated twice. This should fix bug #709.
21 kes Apply Jaime Ventura's 'mail on success' patch.
22 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
23 if memory usage gets too big.
24 kes Tweak migration to ensure that read/write devices are different.
26 kes Create an AUTHORS file to list Bacula contributors.
27 kes Add Richard Stallman's four GPL freedoms to LICENSE
28 kes Require the conf file to have a valid NextPool for writing the
31 ebl Enable RecycleCount in catalog.
32 ebl Fix "echo python | bconsole" segfault
34 kes Implement code to pass the MediaId to the SD. The SD then uses
35 this MediaId when creating JobMedia records. This fixes a bug
36 with Migration where the MediaId got set to the second Volume
37 read rather than the write Volume. Possibly (unlikely) fixes
39 kes Remove NextPool from Job resource.
40 kes Edit a few numbers in the restore dialog with commas.
41 kes Note, the DIR<->SD protocol has changed.
43 kes Replace () by {} in configure.in for proper HP configuration.
44 kes Shorten some lines over 80 characters in filed/backup.c
45 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
47 Version 1.39.28 released:
49 kes Change error message 'illegal' to 'invalid' -- bug #707
50 kes Add rather primitive device resource deadlock detection in
51 the job queue handler. It detects the same read and write device
52 for migration and cancels the job.
53 kes Start adding a unique_dbid_hander() routine in migration to avoid
54 duplicate mediaids and duplicate jobids.
55 kes Add patch from bug #708 to permit relative paths such as ../xxx
56 in the restore tree routine.
57 kes Add Eric Bollengier's patch to reduce locking time in the SD after
58 despooling, and thus many jobs finish faster.
59 kes Correct locking order of reservations lock and device mutex in
60 reserve.c -- this should correct Arno's deadlock that occurred
61 when doing mount/unmount at the same time a job is reserving a
64 rbn Fixed problems with encryption when combined with compression
65 or sparse files. Unfortunately this means that all previous
66 encrypted backups can't be restored.
67 rbn Fixed problem in bfgets with Windows and Mac end of lines.
68 rbn Fixed bug in Windows version of close_bpipe() that cause programs
69 like bsmtp() to hang waiting for the pipe to be closed. Fixed
70 binary file type problems in open_bpipe().
71 rbn Fixed a number of bugs in the mysql DB scripts.
73 ebl Fix broken runscript on director. (RunBefore, RunAfter)
74 ebl Use M_ERROR instead of M_FATAL in runscript.c
76 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
77 rbn Ignore UTF-8 marker at the start of .conf files.
78 rbn Add stab2cv to 3rd party dependencies. This is a utility I
79 wrote that is licensed under the GPL and available on SourceForge.
80 It converts the stab debugging info generated by gcc into Codeview
81 format. Currently it just translates function names to global
82 symbols. This is sufficient to get reasonable stack traces from
83 Dr Watson and to look at minidumps.
84 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
85 rbn Enable Windows XP look and feel for the tray icons and wx-console.
86 rbn Add Windows specific FileSet example to bacula-dir.conf.
87 rbn Reorganize Start menu so that documentation and configuration are
90 rbn Change daemons and utilities so that if -c is omitted from the
91 command line AND there is no configuration file in the current
92 directory then the 'standard' configuration file (eg
93 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
94 doesn't contain any path separators AND there is no configuration
95 file by that name in the current directory then the 'standard'
96 configuration file directory will be searched for a file by that
98 rbn Fixed restore on Windows so that backslashes as path separators works.
99 rbn Add missing query.sql file to Windows installer.
100 rbn Fixed Windows versions of catalog backup scripts.
102 kes Fix optional files in Makefile.in of src/filed that caused
103 a syntax error when using no optional files.
105 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
106 messages; there is no reason to attempt to load a private key.
107 from master key files.
109 Version 1.39.26 released:
111 kes Apply the three patches from Richard Mortimer.
112 bacula-reposition.patch, bacula-tape-reopen.patch, and
113 bacula-eod.patch. This corrects tape positioning on older devices,
114 and also a problem with btape.
115 kes Apply fix from bug report #696 where writing to a FIFO does not
116 work due to a dumb typo.
117 kes Unlock the tape door before the file descriptor is released. This
118 should fix lots of somewhat subtle failures when using an autochanger.
120 kes Correct mtx-changer bug that I introduced in a recent commit, and
121 pointed out by Robert Nelson -- thanks.
122 rbn Fix Windows' daemons so that messages print to stdout if not
123 running as a service.
124 rbn Add daemon name to trace file name (eg bacula-dir.trace).
125 rbn Fix environment variable expansion in directory names on Windows.
126 rbn Fix autochanger support in fill command.
127 rbn Update SQL scripts to match Unix versions.
128 rbn Fix daemon usage displays.
129 rbn Cleanup bacula-dir.conf template.
130 rbn Install openssl.cnf so that the openssl.exe installed in the
131 Bacula\bin directory can be used to generate keys and
132 certificates for TLS and encryption.
133 rbn Fix cleanup of spool files on Windows.
134 rbn Remove /silent option from daemons on Windows. The new default
135 is the same as the old /silent. To enable the message boxes that
136 previously were suppressed by /silent you must add /debug instead.
137 NOTE: As a result of this change, the first time you upgrade from
138 a previous version of 1.39.x you will receive the message
139 boxes when the remove of the old services succeeds. This
140 is the same behaviour as when migrating from a version prior
142 However, going forward, these message boxes will not appear on
143 upgrades or new installs.
144 rbn Add new /debug option. This option enables the message boxes that
145 previously were suppressed by the /silent option. In addition the
146 daemons running as services will open a console window if this
148 rbn Fix bug with service not being removed on migrated installs. This
149 should correct those cases where the file daemon install was failing
150 when upgrading from versions prior to 1.39.x.
152 kes Turn on heap reporting in Dir with zero debug level.
153 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
154 send the same message to stdout.
156 kes Begin work on new GUI 'console'.
157 kes Make configure look in non-standard MySQL library directory
159 kes Make mtx-changer automatically configure the autochanger wait
160 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
162 kes Correct drop_sqlite_tables.in script to not delete the database.
163 kes When writing to a log file, close and reopen the file descriptor
164 if there is an error writing the file.
165 kes Modify the autochanger loaded?, load, and unload commands to print
166 the full text of any mtx output if there is an error. Helps to
167 ease diagnosis of autochanger problems.
168 kes Correct a few Win32 errno returns in the VSS code so that hopefully
169 a resonable Win32 error message will be printed.
170 kes Convert a few strcat()... to bstrncat() in the Win32 code.
172 rbn Added Windows version of bsmtp.
173 rbn Fixed path search for Windows so that Bacula\bin is automatically
174 searched for programs and scripts.
175 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
178 Version 1.39.24 released:
180 kes Apply dvd find volume patch from Richard Mortimer.
181 kes Eliminate the dvd specific mount routines using only the
183 kes Make update_free_space a method of DEVICE and rename
186 kes Require a messages command acl to be able to receive messages
188 kes Add console, system, and scan job types in util.c.
190 kes Print the Volume purged message only for real jobs to keep
191 from cluttering up the daemon messages.
192 kes Lock the tape drive door while Bacula is using the device.
193 kes Add back the 'No Jobs running' message to FD and SD status because
194 my regression script depends on it, and I'm too lazy to change the
196 kes Start using structure assignments (not too happy about it ...).
197 kes Fix a bug in the tools Makefile that broke on Solaris.
198 kes Unload any autochanger drive during a 'release' command.
200 kes Enhance error message when restoring without bootstrap file.
201 kes Check restored size only for regular files.
202 kes Store Python job level in job record in Dir.
203 kes Add back code to open tape device nonblocking, but if rewind fails
204 release file descriptor.
205 kes Modify acquire.c to first try autoloading the device. Also, ask operator
206 to mount tape if drive cannot be opened.
207 rbn Made Windows service tray status windows resizable.
208 rbn Fixed horizontal scrolling of text in status window.
209 rbn Preserve horizontal and vertical scroll position while
210 updating. This prevents the display being reset to the
211 top line every 5 seconds.
212 rbn Fix Windows cross-compile compatibilty problems with
213 *nix variants such as OS X without the zic command.
214 rbn Eliminate dependency on man2html.
216 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
218 kes Fix a compiler warning in compat.cpp
219 kes Change strcpy to bstrncpy in compat.cpp
220 kes Remove some broken code in bdb_list.c
221 kes Fix, hopefully the last, ACL problem in the restore command.
222 kes Update the README.mingw32
223 kes Add new version of upgrade-win32-client.txt to examples directory.
224 Submitted by Michel Meyers.
225 kes Print an INFO message in the job report when a Volume is marked Purged.
226 rbn Fixed handling of external program and script execution
227 so that the format of the command line is more flexible.
228 Now executable path names containing spaces are translated
229 to the equivalent short name automatically. The result is
230 passed to cmd.exe with the quotes removed.
232 kes Apply the recycle patch from Richard Mortimer.
233 kes Convert a few if statements in dev.c to switch statements.
234 kes Start using print_errmsg instead of bstrerror().
235 kes Print a job message in SD when a job is marked to be canceled.
237 kes All code added back. Fixed block.c read/write to loop only 3
238 times. This apparently keeps the OS from crashing (at least
240 kes The kernel bug still persists. Backup something then immediately
241 do a bscan on the same tape, and the kernel will crash.
242 kes Simplifed tape open(). It no longer uses nonblocking mode, which
243 means that opening with no tape loaded will probably take at least
244 6 minutes before an error is reported.
245 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
246 when doing set_os_device_parameters.
247 kes Report open error in mount.c
248 kes Remove all .exe files from the installer directory on make clean.
250 kes Start adding back removed code.
251 kes Back out a number of changes because backups to tape crash my
253 kes Remove the inetd code from the File daemon.
255 kes Add -c option to pg_dump so that it initializes tables when
257 kes Fix FirstWritten time on Volume to be obtained from SD so that
258 it is the actual time the volume was first written.
259 kes Minor Makefile changes.
260 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
261 ebl Add yes keyword to prune/purge command
263 kes Correct a test in block.c that prevented restore of a DVD from
264 looking at the last part in the spool directory.
265 kes Make some error messages clearer mostly by using the word DVD
266 in the message. Improve infor message in read_record for DVDs.
267 kes Remove DVD kludges in dircmd.c label/relabel.
268 kes Move the dvd relabel code from dircmd.c into
269 write_new_volume_label_to_dvd() adding a relabel argument.
270 kes Rewrite the truncate_dvd() code to be much simpler and
271 more logical. First blow away any spool part, then create a
272 new empty part and write to the DVD.
273 kes Rewrite the can_write_on_non_blank_dvd() code making it
274 only ensure that no valid data is on the DVD -- i.e. it
277 kes Minor Makefile fixes.
278 kes Put attach_dcr_to_dev in a subroutine.
279 kes Make attaching/detaching to/from a device use a flag and
280 only detach if actually attached.
281 kes Add dvd-simulator.in to scripts directory and add to configure.
282 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
283 This could be a cause of a number of drive reservation problems.
284 Note, this code is now in attach_dcr_to_dev().
285 kes Suppress doing Volume updates if it is a system job. This should
286 prevent the DVD label blocking.
287 kes Clear the freespace ok flag in a couple of strategic places.
289 kes Put removing zero sized spool part file in subroutine and
290 call from release_device().
291 kes Add Richard's patch for relabel to dircmd.c, but save and restore
293 kes Rework a lot of subroutines in dev.c to take dcr as an
294 argument. This is done to eliminate the usage of attached_dcrs
296 kes Change truncated_dvd to blank_dvd, which seems more suitable.
297 kes Apply most of Richard Mortimer's truncate patch.
298 kes Create lseek() method for DEVICE that takes dcr as an
299 argument. This is to eliminate the use of attached_dcrs in
300 lseek(). The calls to lseek_dev() must still be changed.
302 kes Apply Richard Mortimer's patches for printing an error
303 message in btape when a DVD is used, and to initialize traceback.
304 kes Added error message to btape when trying to access a file.
305 kes Move prototype of update_slots() to protos.h.
307 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
308 and FDJobStatus to the Director Python variables.
309 kes Make sure valid argument passed to str_to_utime() where Arno
311 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
312 I.e. part of two different patches.
314 kes Modify disk changer to simulate some of the error conditions
316 kes Make sure the close() call in the SD tools is just before the
318 kes Implement dir_get_volume_info() in bls using the patch from
319 Richard Mortimer but call find_num_dvd_parts().
320 kes Implement find_num_dvd_parts() that mounts and scans a DVD
321 and counts the parts.
322 kes Move the omode code in open_dvd() up so that the cannot
323 write on blank disk can check can be bypassed for read mode.
326 kes Disable normal data spooling for DVD writing which uses
327 a different spooling mechanism.
328 kes Apply patch from Richard Mortimer to ensure that the number
329 of DVD parts is correctly updated.
330 rbn Save installer details log in the Bacula directory as
332 rbn Add installer generation of client and storage templates
333 suitable for @inclusion on the director.
334 rbn Mark previously installed Win32 components read-only since
335 deselection doesn't do anything.
337 Version 1.39.22 beta released:
339 kes Fix logic error in handling error return from mtx-changer
341 kes Make status from SD aware of -1 (unknown) Slot status.
342 kes At Eric's suggestion make both the 'slots' and 'drive' commands
343 to the Storage daemon work even if the drive is busy.
344 kes Make two separate Win32 menu links for starting bconsole and
345 wx-console in winbacula.nsi
346 kes Apply DVD part_spooled patch from Richard Mortimer
347 richm@oldelvet.org.uk
348 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
349 rbn Fixed problems migrating settings from previous releases in
350 Win32 installer. Add Readme.txt with an option to show it on
351 the installer Finish page.
353 kes Use get_catalog_resource() to open catalog database
354 to ensure that ACLs are respected and that user is
355 correctly prompted for database.
356 kes Integrate multiple console/director patch from
357 Carsten Paeth calle@calle.in-berlin.de
358 ebl Add character substitution in Job/JobDefs WriteBootStrap.
359 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
360 kes Apply patch supplied in bug #656 to pass priority field
361 in the run dialog to the Director in gnome console
362 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
363 this will fix bug #627 where Bacula eventually gets
364 confused about what Volume it wants.
365 kes Add a new close_part() class in the SD to save the device
366 state around open/close_part/open for DVD writing. This
367 should fix the num_dvd_parts getting zeroed as reported by
369 kes Apply patch from Richard Mortimer that correct edit code
370 for debug output of st_size.
371 ebl Add support of encrypted data stream to bscan.
372 display data_len instead of data content (may be binary)
374 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
375 bcopy. Fixes bug #669 reported by Eric.
376 kes Fix incorrect number of arguments in SQL statement in
377 sql_get.c as reported by Eric.
379 kes Update examples directory.
380 kes Remove unused variable in winservice.cpp
381 kes Make Win32 make command build installer.
382 rbn Add new Install Type page, used to select between Automatic
383 and Custom installs. Automatic installs only prompt for
384 configuration items that can't be reasonably defaulted.
385 rbn Added Bacula logo to page headers.
386 rbn Added Upgrade support
387 - Configuration and component selection are migrated from
389 - Configuration of upgraded components is preserved and
391 - Configuration of new components is handled according to
392 the Automatic / Custom selection.
393 - Component selection is defaulted to previously selected
395 rbn Installation of Server components is disabled on
396 Windows 95, 98 and ME.
397 rbn Added URLs for support, info and upgrades to Bacula entry
398 in Add/Remove Programs.
399 rbn Added Version info to Bacula entry in Add/Remove Programs.
401 kes Correct dvd code that breaks tape labeling.
402 kes Implement Enabled on update slots.
404 kes When doing a label, pass the VolBytes back to the Director,
405 which puts it in the catalog.
406 kes Print an error message if the user attempts to prune an
408 kes Need to start using %ld when sscanfing 32 bit values.
410 kes Correct the counting of VolCatBytes for DVDs.
411 kes Add code to mount.c to require that VolCatBytes corresponds to
412 what is actually found when doing an append.
413 kes Update freespace only after writing on the DVD.
414 kes Remove code that blows away the current part in the spool file.
416 kes Apply new dvd-handler patch from Richard Mortimer.
417 kes Tweak so that debug level 20 shows only DVD commands.
418 kes Correct spooled_part flag in dev.c close() so that it is cleared
419 when the spool file is deleted or does not exist.
420 kes Print part number in read_records when eof hit (restore).
421 rbn Installer default changed to start services on new install.
423 kes Make find with no args in tree restore return error rather than
424 stopping the selection. Fixes bug #665
425 kes Rework DVD writing to ensure that the last part is written
426 on open_next_part when dealing with a spool file.
427 kes Correct the lseek_dev() routine to handle end point correctly
428 (bug introduced by me).
429 kes Allow part number to exceed num_dvd_parts in lseek_dev().
430 rbn Change make_session_key on Windows to use WIN32 APIs to produce
432 rbn Add new tool scsilist.exe which displays the changer, tape and
433 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
434 to add them to bacula-sd.conf.
436 kes Apply dvd-handler patch from Richard Mortimer.
437 kes Apply dvd error check patch from Richard Mortimer.
438 kes Apply bpipe race patch from Richard Mortimer.
439 kes Rework how DVD labels are handled and set append only
440 when part > num_dvd_parts.
442 kes Rework many features of DVD writing and reading. Added many error
443 messages. Most importantly changed part to represent the current
444 part number base zero. This makes current DVD writing incompatible
445 with previous version.
447 kes Add host:port to connect failure messages to FD and SD from Dir.
448 kes Add WhereACL to console ACL list. If nothing is specified, only
449 the default is permitted for restore. Otherwise, *all* allows any
450 path, or you can specify permitted paths. This should allow control
451 over where users can restore files. This is untested.
452 kes Modified message to add a ? (as in loaded?) when querying the autochanger
453 for what Slot is loaded.
454 kes Fixed the use of Slot, so that is more correctly maintained, thus
455 eliminating unneeded duplicate calls to determine what Slot is loaded.
457 kes Install man pages with 'make install'
458 kes wx-console crashes because of differences between Bacula and wxWidgets
459 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
461 kes correct improper indenting in wx-console/console_conf.c
462 kes update wx-console header copyrights
463 kes Fix bug #658 where wx-console mangles file/directory names containing
466 kes Add Media.Enabled flag to client backups for dotcmds.c
467 kes Enforce Media.Enabled=1 for a current restore to work.
468 kes Require restore case 3 to have sqlquery permission to work.
469 kes Remove obsolete del_MAC sql command.
470 kes Ensure that bscan creates Volumes with Enabled=1.
472 Version 1.39.20 beta released:
474 kes Correct missing Client table reference in SQL pointed out by
477 kes Fix Win32 build (new entrypoint, start baculafd).
479 kes Add -n option to bconsole to turn off conio.
480 kes Print JobIds to be migrated in Job Report.
481 kes Add additional user supplied notes to the messages part of
482 bacula-dir.conf concerning multiple email addresses.
483 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
484 kes Add more recent Feature requests to Projects file.
486 kes Apply Maritn's fix to src/win32/Makefile.
487 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
488 kes Implement pruning for Migration and migrated jobs.
489 kes Implement PoolOccupancy migration.
490 kes Implement PoolTime migration.
492 kes If doing a mount, look for a slot, and if specified pass it to
493 the SD so that it can load the autochanger.
494 kes Return DVD=1 flag if a label command is done to a DVD. This
495 permits setting VolParts to 1.
496 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
497 rework ua_label code based on DVD media type to use DVD flag returned.
499 kes Eliminate some compile warnings in dird_conf.c
500 kes Format the bytes field in the terminated jobs part of the status
501 command for the three daemons with suffixes to reduce print size
502 of backup bytes. Suggested by a user.
503 kes When not descending into a directory, print the File= name that
504 triggered it -- makes why not descending a bit clearer.
505 kes Do not unload autochanger when doing a list command -- basic code
506 from Eric Bollengier.
508 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
509 to build-depkgs-mingw32. It now handles two options -h to display
510 help and -C to reextract the source and apply the patches. The -C
511 option is useful for updating the source after new patches are
513 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
514 This allows updating to new versions without having to modify the
515 script and makes it easier to figure out which packages and which
517 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
518 as build-depkgs-mingw32 except they are built using Microsoft Visual C
519 and placed in the depkgs-msvc directory. There is also an
520 External-msvc file to describe the packages.
522 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
524 kes Fix bug #462 incorrect error message printed when client script called
525 from File= was not found.
526 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
527 do a rewind on Solaris when no tape is in the drive (Solaris does not
528 have the detailed errno found on Linux). Added Solaris specific code.
529 Note, this may apply to other OSes as well.
531 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
532 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
533 fix bug 648 - update sqlite script patches, lock out gnome2console
534 builds for platforms with gtk+ < 2.4.
535 Updated build_rpm.sh - add remote source directory, add switch for
536 signing, refine file names.
537 Updated spec file again for Mandriva build as they have this curious
538 custom of silently converting all manpages to bzip2 format just before
539 the final packaging step.
541 rbn Fixed the Windows Makefiles so that they won't accidentally try and
542 pickup binaries for the Unix build. This allows both the Unix
543 build and the Windows build to be built in the same tree without
544 interfering with each other.
545 rbn Fixed error handling and cleaned up mtx-changer.cmd.
546 rbn Added the rest of the database scripts. These are installed but are
547 not yet edited for variable replacement.
548 rbn Broke out the cats functionality from bacula.dll and put into new
549 separate dlls for each database type. At installation time the
550 correct one is copied to bacula_cats.dll.
551 rbn Eliminate the need to install the mysql.dll on client only builds.
552 rbn Moved dird/sql_cmds.c into the cats directory so all the database
553 specific #ifdefs were in the cats directory.
554 rbn Added a new sql_cmds.h with all the declarations for the variables
555 exported from sql_cmds.c.
556 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
557 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
559 kes Correct improperly formatted list command output reported by Dan.
561 kes Correct despool time calculation.
563 kes Remove previous changes to compat.cpp as they create problems.
564 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
565 kes Attempt to fix problems with the msg_queue crashing on Solaris
566 when Bacula is terminating, but problems remain.
567 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
568 name editing problems with too many \\?\es.
569 kes Fix some Bacula source code style problems in compat.cpp.
570 kes Add debug code to compat.cpp and convert non-Bacula debug code
573 kes Change the name of the technical notes file from kes-1.39 to
574 technotes-1.39. Prefix my messages with 'kes '.
575 kes Allow dequeue_messages() to be called twice. Should fix bug
577 kes Add Job type to bscan Job information output.
579 kes Update copyright date in program files, and for the most part
581 kes Implement %q in bsnprintf.c apparently I forgot it.
583 kes Make disk-changer sed command compatible with FreeBSD.
584 kes Make a first cut at a ReleaseNotes and ChangeLog for a
586 kes Make make clean descend into the src/win32 directory.
587 kes Fix some #ifdefing so that Solaris and FreeBSD compile
588 sys/stat.h was turned off.
589 kes Use suffix editing for new transfer rate messages.
590 kes Attempt to come up with a workaround which seems to be an OS
591 bug where write() returns EBUSY. IMO this should not happen.
592 It triggered in truncatebug test. The workaround retries using
594 kes Eliminate a strerror() call in a class method that failed with
596 kes Use rm -rf rather than rmdir to delete the src/win32/release
597 directory during make clean.
599 kes Make bscan ignore ACL streams.
600 kes Update projects files with new Feature Requests.
601 kes Generate current English and French manuals and upload
603 kes Update the home page to include the new British/French flags to
604 switch between translations. Work done by Alexandre Baron.
605 kes Make disk-changer script print an error message if the changer
606 directory is not defined.
607 kes Create a generic DB routine for getting an int (32/64 bit) from
609 kes Add more migration code.
610 kes Add a few more files to .cvsignore here and there.
611 kes Minor fixes for SD write rate and despooling rate.
612 kes Turn off new test code in src/console.c
616 kes Incremented the version number to signify that all of Robert's code
617 for Win32 that was in the branch is now integrated into the HEAD,
618 and that Eric has submitted code that we hope will provide limited
619 backward compatibility with 1.38 file daemons (more testing to be
621 kes I rationalized a few of the names of the variables (mainly jcr names)
622 that are used during migration as keeping three different jcrs at the
623 same time clear in ones head is not easy.
627 eb Tweak new runscript feature to work with 1.38.x FDs.
628 eb Correct crypto.c to fix segfault when restoring an encrypted stream
629 on fd which don't use rsa keys.
630 eb Add yes/no English keywords on localized yes/no questions.
632 kes Several important commits from Robert Nelson for code cleanup and
634 kes Modify console.c so that when conio is enabled, it converts \n to
635 \n\r before outputting to the console. Hopefully this will fix
636 the problems with expect in Perl that Eric saw.
638 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
640 kes Add Comment field to llist of a volume.
641 kes Allow true/false in some yes/no questions.
642 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
643 kes Remove a few /n's when scanning commands from another daemon. This
644 permits adding additional fields later.
645 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
646 kes Update README.mingw
648 kes Tweak authentication to work with 1.38.x FDs.
649 kes Tweak catalog make scripts.
650 kes Fix catalog upgrade scripts so that they work.
651 kes Correct despooling debug code to eliminate race condition.
653 kes Add additional fields as specified by Arno to LocationLog.
654 kes Add comment field to the Media record.
655 kes Add Time field to the Log record.
656 kes Correct migration SQL (thanks to Bill Moran) so that it
657 runs with PostgreSQL also.
658 kes Add spooling/despooling info in status output of SD.
660 kes Spend a lot of time integrating mkcdrec with the rescue disk.
661 kes Add VOLMGMT message class for volume management messages (none yet).
662 kes Add CATALOG as a destination. It goes into the LOG table.
663 kes Implement the Log table in the DB.
664 kes Implement the Location Log table in the DB (for user use).
665 kes At Eric's request add a run_scripts() just after blast_data in
668 kes Add Enabled column to Location, correct some typos in DB schemas.
669 kes Correct bug I introduced into RunScripts enum.
670 kes Add log table to Catalog
671 kes Purge original job migrated if the migration terminates normally.
672 kes Cleanup purging of files/jobs so that it is done only in a
674 kes Add new VOLMGMT message class.
675 kes Add Catalog message destination (user conf code remains to be written).
677 kes Modify read_record and friends to properly deal with migration
679 kes Update debug code in read_record.
681 ======================= Warning ==========================
682 Separate read and write storage in Jobs in the Director. This
683 is a major rewrite of some of the low level code and hence has
684 a high probability of introducing bugs.
685 ==========================================================
687 kes Move the job init code up to *before* the job is put into
688 the job queue (resource allocation queue). This permits the
689 job to establish whether it will read or write or do both.
690 kes Add name() methods to all the resource classes.
691 kes Implement separate read and write storage resource
692 allocation/deallocation in jobq.c
694 ======================= Warning ==========================
695 Implemented new method of getting the default Storage from the Media
696 record rather than from the MediaType for restore. As a fall
697 back, if no Storage is defined, use the MediaType. This
698 eliminates most all prompts if there are multiple MediaTypes
699 used. This is an important and fundamental change.
700 ==========================================================
702 kes Add more detail (Storage, Device) to list of volumes printed
704 kes More code in migrate. In particular start multiple jobs if
706 kes Probably overkill, but ensure that the bsr is unique even within a
708 kes Rework bsys.c drop() so that it now should work as expected.
709 kes Update a bunch of old copyrights -kes particularly in .h files.
710 kes Remove src/lib/bshm.c/h
714 ======================= Warning ==========================
715 All hash codes in the database are now kept in world
716 compatible base64 format (no = filling). This means that
717 all FileSets will be updated and if you are running
718 verify jobs, you must do an InitCatalog.
719 Authentication uses the new algorithm, but should be
720 backward compatible with 1.38.x
721 ===========================================================
723 kes Modify the authentication routines so that the 1.39.15 Director
724 always runs with the compatible binary to base64 code (same as
725 the rest of the world). It will however detect if an SD or
726 FD is running the old code and if that is the case, will use
727 the old algorithm for authentication. However, all consoles must
728 use the compatible algorithm, and all data entered into the database
729 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
730 use the compatible algorithm.
731 kes Rename the cram_md5 routine names to be slightly more appropriate
732 to what they are doing (challenge and respond).
733 kes Robert committed his #ifdef and header cleanup.
735 kes Fix a compiler warning in files/backup.c
736 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
738 kes Robert committed his low impact changes.
739 kes I removed a size_t from the jcr.h definition.
740 kes Update the tape regression scripts (still to be tested).
741 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
742 kes Require done or quit to exit from in memory tree restore.
744 kes Write install/uninstall of new manpages. There are now a
745 pile of man pages. Some of which need a lot of work.
747 ======================= Warning ==========================
748 The --mandir ./configure option now points to the top level
749 man directory. The man files will be installed under
750 mandir/man8 and mandir/man1 as appropriate.
751 ==========================================================
753 kes Add complete text of GPL to LICENSE.
754 kes Implement job report that indicates where Storage and Pool
755 came from -kes with overrides and Pool storage and NextPool,
756 it is all very complicated.
757 kes Create a few common subroutines for backup.c and migrate.c
758 kes Eliminate warning messages from tray-monitor.c
760 kes Apply fix for scheduler for missing unlock_jobs().
761 kes Clean out autoconf caches before rebuilding configure
762 kes Fix the FreeBSD pthreads lib define updated by Dan.
763 kes Add missing semicolon in src/console/console.c
764 kes Add Robert's enhanced version of build-win32-cross-tools
765 as well as his patch file.
766 kes Note, the new gcc options are likely to break building of
767 wx-console or the tray-monitor ...
769 kes Implement Robert's suggestion to suppress printing compile lines.
770 kes Detect GCC correctly (I hope)
771 kes If using GCC (actually g++) add the following compiler flags
772 -fno-strict-aliasing -fno-exceptions -fno-rtti
774 ===================== Warning =============================
775 Turn on new bsnprintf() code. This could cause print output
777 ===========================================================
779 kes Fix crypto when not using openssl. I previously overlooked this.
780 kes Eliminate crypto type punning problems by eliminating void * and
781 using uint8_t * instead.
782 kes Harden authentication failure in FD by single threading errors
783 and forcing a 6 second wait.
785 ===================== Warning =============================
786 Removed 'Accept Any Volume' directive.
787 ===========================================================
789 kes Major cleanup and simplification of regress using shell functions
790 (more tests to be converted to new format)
791 kes Add detection of 64 bit Irix as indicated by user.
792 kes Increment catalog database id from 9 to 10.
793 kes Add a few of the new database fields to the various C++
795 kes Implement code to fill in the most important new fields (e.g.
797 kes Ensure that most of the new fields are in create/get/insert/update.
798 More work to be done.
800 kes Update some very old licenses in src/cats.
801 kes Modify the database format for handling Migration jobs:
802 Add PriorJobId, RealEndTime to Job table
804 Remove Stripe from JobMedia record (not used, wasting space)
805 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
806 Add Cost to Location table.
807 kes Delete mac_record subroutines.
808 kes Add new table values to create/update/get routines as appropriate.
809 kes Update the update_tables and make_tables scripts.
810 kes Make a first cut in using a union where multiple pointers (actually
811 pointers to pointers) are stored.
812 kes Make some changes to base64.c suggested by Robert and others and add
813 a small amount of documentation.
814 kes Add some changes suggested by Peter for Solaris (bregex...)
815 kes Make runscript.h always built because it needs to be pulled into
816 more places. In particular its RES was left out of a union.
817 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
818 This makes it slightly easier to detect uninitialized variables.
820 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
821 sometimes creates install problems.
822 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
823 Nelson's code. More to do.
824 kes Convert a few store_bit to store_bool in filed_conf.c.
825 kes DVD tweak to block.c as supplied by Uwe Muessel.
827 kes Modify configure.in to check for typeof().
828 kes In findlib/attribs.c use typeof instead of templates if possible.
830 kes Implement partial error messages for src/filed/acl.c
831 kes Fix return code to fail when doing update barcodes and
832 Pool resource is not found. This previously caused Volumes
833 to be labeled as cleaning tapes.
834 kes Small updates to projects.
836 kes Add Eric Bollengier patch for new RunScript directive. It breaks
837 compatibility between dird and fd.
839 kes Prevent DVD code from rewriting label if the device cannot be
841 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
842 fix Debian build bug.
843 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
844 kes Integrate manpages contributed by Jose Luis.
845 kes Update projects file.
846 kes Add manpages Makefile.in to configure.in
847 kes Remove installation of bacula.8 in scripts directory.
849 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
851 O_NOATIME is a open() flag which makes it possible to read a file without
852 updating the inode atime (and also without the inode ctime update which
853 happens if you try to set the atime back to its previous value). It also
854 prevents a race condition when two programs are reading the same file, but
855 only one does not want to change the atime. It's most useful for backup
856 programs and file integrity checkers (and bacula can fit on both
859 Recent versions of the Linux kernel and glibc have support for it (the
860 glibc support being mostly copying the O_NOATIME definition to
861 bits/fcntl.h). If there's no support for it on the kernel, trying to use
862 it does nothing (since the kernel ignores unknown flags).
864 If the kernel has support for it, trying to use it either works, fails
865 silently (mostly in remote filesystems), or returns errno=EPERM (if you
866 are not either the owner of the file or root). A simple way to prevent the
867 failure is to open the file without the flag and set it later with
868 fcntl(F_SETFL), ignoring any EPERM errors.
869 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
870 of restarted jobs to complete (due to a destroyed pthreads conditional
871 variable used by the message thread).
872 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
874 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
875 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
876 colons in query.sql file.
877 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
878 not to create orphans.
879 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
880 in restore long listing.
881 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
882 of incorrect MarkedId.
883 kes Apply patch from adioso bug #616 to correct text in manual (replace
884 Director with File daemon).
885 kes Rework a few of the zlib changes so that they build properly.
888 kes Move DIR 'run' command to SD before starting the message thread
889 as suggested by Cristopher Hull to avoid a race deadlock from
890 two threads using the bsock structure.
891 kes Modify LICENSE to correct some problems pointed out by Debian.
893 kes Correct EOF with no \n lex.c problem.
894 kes Tweak compat.h compat.cpp and merge with apcupsd
895 kes Add additional INFO messages if autochanger cannot be used.
898 kes Simplify Win32 Makefile
899 kes Correct count of buffers/bytes used by smartall.c
900 kes Updated compat.h after porting apcupsd to MinGW.
902 kes Work on getting wx-console building on MinGW. wxWidgets now builds
903 started adding Makefile ...
904 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
906 kes Reloading a bad configuration file doesn't kill director any more.
907 Thanks to fix from Eric Bollengier.
909 kes Fix problem of accents with new Win32 code.
910 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
911 works in the MinGW build with the exception that there
912 is a problem with accented characters -kes i.e. there is
913 some mapping problem with wide characters.
914 kes The code no longer compiles with Microsoft VC++.
916 kes Start implementing Christopher's St.Bernard code.
917 kes Add Christopher's mods for opening files.
918 kes Strip \r \n from Win32 error messages (Christopher)
919 kes Add more info about Win32 system if unknown (Christopher)
920 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
921 kes Fix a number of incorrect strings marked for translation, when
922 they should not be (e.g. commands).
923 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
924 Patches supplied by user in bugs #608 and #599.
925 kes Use most recent of st_ctime and st_mtime in restore tree DIR
926 listing. This fixes some problems with Win32 printing incorrect
928 kes Correct the clock shift comm time calculation between the DIR
929 and the FD. It was added rather than subtracted.
930 kes Strip all backslashes in filenames to be restored on Win32
931 machines -kes the names should all be in Unix format, and if
932 there are any backslashes it is most likely due to an improper
933 FileSet definition, and the files will not otherwise be
935 kes Remove lib/regex.c (replaced by bregex.c).
936 kes Delete src/win32/License.txt
937 kes Modify installer to install LICENSE
939 kes Fix bug in build-win32-cross-tools script reported by Howard
940 kes Implement cross compiled bconsole
942 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
943 kes Write first cut of README.mingw32
944 kes Add back ua_label barcode fix from Rufolf Cejka.
945 kes Integrate the majority of the Mingw cross-tools submission
946 made by Howard Thomson. Everything compiles, with zlib, openssl,
947 and VSS turned off. Linking needs a pthreads library ...
949 kes Add 'Dir Status' button to the gnome console.
950 kes More work on migration.
951 kes Restore non-compatible base64 coding to permit compatibility.
952 kes Display heap stats in Storage daemon without debug level.
954 kes Integrate most of the MinGW changes -kes more to do.
956 kes Implement using pg_config for finding PostgreSQL files.
957 Fixes bug #600. Patch supplied by user.
958 kes Remove -t option from mktemp in mtx_changer.in and use
959 working directory. Fixes bug #578.
960 kes Update job start time after the any run before job so that
961 files created by the script are only backed up once. Fixes
963 kes Strip trailing newline only from filenames entered in
964 the restore command when reading a file. This permits
965 the user to enter filenames with trailing spaces. Fixes
966 bug #549. The user supplied a patch that I modified slightly.
967 kes Use the most recent time (st_mtime, st_ctime) in the dir
968 command in restore. This gives the user a better idea of what
969 the newest file really is. This fixes bug #574. The fix
970 was suggested by the user.
971 kes Implement a compatible version of base64. This permits external
972 programs to duplicate Bacula's base64 algorithm using standard
973 routines. This fixes bugs #296, and 565. Patch submitted by
975 ================= Note ========================
976 Previous Signatures stored in the database are no longer
977 compatible with this. The main downside is for Verify jobs,
978 and doing an InitCatalog run will fix the problem. Also, the
979 authentication between the deamons is changed, so all daemons
980 must be simultaneously upgraded.
981 ==============================================
982 If you don't like this fix, set:
983 const bool compatible = true;
985 const bool compatible = false;
988 kes Ensure that DB signature is never NULL.
989 kes Ensure that DB table names are not translated.
990 kes Fix scheduler to handle time skew (eg daylight savings).
991 kes Fix scheduler to use lock_jobs() to avoid most problems
992 with reload. Window is now milliseconds.
994 kes Apply patch from Christopher Hull
995 kes Allow multiple connections to database with different
997 kes Invalidate the scheduler when doing a reload. Fixes seg
998 fault, but still 60 second window.
999 kes Additional info in Reschedule message.
1000 kes Use set_jcr_job_status() everywhere to prevent loss of
1002 kes Display peer IP in FD if error from connecting DIR.
1003 kes Don't increment file count for DIRBEGIN.
1004 kes Replace illegal characters in Win32 filename by _.
1005 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1006 kes Hash hard link filenames rather than linked list.
1007 kes Fix for security failure in chdir on Win32.
1008 kes Add CreateDirectoryA/W win32 API entry points.
1009 kes Add /silent option to Win32 FD for Install/Remove service.
1010 kes Always print Heap statistics in FD.
1012 kes Remove the -f option from the chown in Makefile.in for more
1014 kes Change setting the group in Makefile.in to use chgrp for
1016 kes Implement a write_store and read_store to replace
1017 dirstore in reserve.c
1018 kes Implement a Bacula read/write lock for Python rather
1019 than using the Python lock to avoid recursive problems.
1020 kes Correct the uninstall directory names in filed/Makefile.in
1021 as reported by a user.
1023 kes Correct some problems with database creation (new tables).
1024 kes Replace a bunch of old 0x%x by %p.
1025 kes Get first cut of Migration with Job selection working.
1027 kes Change store_bit() to store_bool() for the Spooling in
1028 dird_conf.c -kes bug reported by Robert Nelson.
1030 kes Correct Makefile bug found by Dan Langille.
1032 kes Correct Makefile for Solaris /bin/sh
1033 kes Correct mtx-changer.in for Solaris /bin/sh
1034 kes Abort if a conf resource does not have a Name =
1036 kes Change the name of the regex program to bregex.
1037 kes Add the bwild program to the tools directory. It is similar
1038 to the bregex program.
1039 kes Implement create bregex.h and bregex.c in src/lib from the
1040 Python regexp program.
1041 kes Use the new bregex.c to implement Regex expressions on Win32.
1043 kes More work on migration.
1044 kes Implement wild program in tools directory for testing
1045 wild-cards. Almost identical to the regex program.
1046 kes Up port VSS single thread locking code.
1047 kes Replace N_(..) by NT_(...) to inhibit translation of
1049 kes Modify Makefile to change the permissions on Working Directory
1050 to 770 if the directory is created.
1051 kes Do not fail the Makefile if changing the permissions or
1052 owner/group on WorkingDir fails.
1053 kes Remove early selection of Scratch Volumes in the recycling
1055 kes Correct the old recycling algorithm so that Scratch Volumes
1056 are selected when looking for a Volume in the changer.
1057 kes Correct a typo in the Verify SQL reported by Joe Park.
1059 kes Remove automatic case folding on Windows FDs. You must
1060 explictly use the 'Ignore Case = yes' option.
1061 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1062 scratch volume in an Autochanger early in the 'recycling'
1065 kes Make weof() and clrerror() methods of class DEVICE.
1067 kes Tweak license to include Microsoft restrictions.
1068 kes Move mysql.reconnect to after real_connect(). Thanks to
1069 Frank Sweetser for the patch.
1070 kes Disallow a backslash in a File = directive (Windows junk)
1071 unless the string is quoted.
1072 kes Apply Eric's patch to ua_label.c so that daemon protocol
1074 kes Add NT_ definition for strings that should not be translated.
1075 kes Apply NT_() to ua_label.c
1076 kes Remove timed wait for VSS on Win2K3 as it is not yet
1078 kes Correct bacula.in script to reference bacula-ctl-xx in the
1079 sysconfig directory rather than the bin directory.
1081 kes Fix a long standing bug in the bacula start/stop scripts.
1082 kes Attempt to add the new bacula-ctl-* files to the rpm.
1083 kes Switch to using typeof() for list traversing to avoid
1084 as many FC5 g++ compiler warnings as possible.
1086 kes Split the bacula start/start script into four files:
1087 bacula -kes starts and stops calling other scripts
1088 bacula-ctl-dir -kes starts/stops the director
1089 bacula-ctl-fd -kes starts/stops the File daemon
1090 bacula-ctl-sd -kes starts/stops the Storage daemon
1092 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1093 kes Correct editing of JobId from int to int64 in fd_cmds.c
1094 kes Eliminate FileSet name race with bash_spaces() and multiple
1095 threads by bashing in a local.
1096 kes Fix error return from 'use storage' to print a correct error
1097 message rather than nothing.
1098 kes Correct false re-read last block error message when two jobs
1099 are simultaneously writing at the end of a tape.
1100 kes Simplify exit conditions in the reserve.c code to avoid
1101 possible non-release of reservation_lock().
1102 kes Suffle lock order in reserve to avoid deadlock between
1103 reservation lock and device mutex.
1105 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1106 tracking this down for me !!!! as it broke the Win32 build.
1108 kes Integrate addition of line count limitation to bsmtp -l from
1109 Sebastian Stark <stark at tuebingen.mpg.de>
1111 kes Implement regex test program in tools directory.
1112 kes Attempt to fix time problem with bsmtp with foreign langs.
1113 kes Add strip_trailing_newline() submitted by user.
1114 kes Implement regex matching in migrate.c
1116 kes Fix bug #537 to allow arbitrary time to mount a volume for
1117 restore, if polling is turned on.
1118 kes If dir_user or dir-group is specified in ./configure apply it to
1119 the working-dir. Fixes bug #533.
1120 kes If rescheduling a job cancel the previous incarnation with the SD.
1121 Fixes bugs #566 and 557.
1122 kes Fix bug #567 do_message() definition type conflict.
1125 kes Add more jcr methods and make mutex and use_count private.
1126 kes Create lock/unlock methods for jcr.
1127 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1128 records to get to seek position.
1129 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1130 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1131 terminates correctly by doing pthread_kill(). Do not destroy
1132 SD cond wait variable between executions of the job. Use local
1133 mutex for cond variable to avoid blocking jcr chain. Fix poor
1134 use of jcr use count in jobq.c for restarted jobs.
1135 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1136 lib/jcr.c -kes prevents locking the jcr chaing.
1137 kes Apply patch from bug #564, which corrects listing volumes with
1138 multiple autochangers. Apply same fix to next volume list.
1139 kes Fix bug #562 where restore bootstrap file is not unique.
1140 kes More details in implementing David's migration syntax proposal.
1141 kes Save and restore dcr when swapping drives so that if we have
1142 a write dcr it is not lost.
1143 kes Use new routine lock_reservations() to lock the reservations
1144 system, and call it while looking for a volume in askdir.c.
1145 This could possibly fix bug #543.
1146 kes Stop SD command loop if job is canceled.
1149 kes Remove old code from findlib/create_file.c
1150 kes Rename mac.c migrate.c
1151 kes Add user friendly display of VolBytes in job report.
1152 kes Rename target... to previous... to make it a bit easier to
1154 kes Add selection type and selection pattern to Migration (idea
1155 given by David Boyes).
1158 kes The po files should now be current.
1159 kes Fix new sql_use_result() code to properly release the
1160 buffers in all cases.
1161 kes Use the keyword ujobid to mean the unique job id; job or jobname
1162 to mean the Job name given on the Name directive, and jobid to
1163 be the numeric (non-unique) job id.
1164 kes Allow listing by any of the above.
1165 kes Add the user friendly job report code for reporting job elapsed time
1166 and rates with suffexes from John Kodis <kodis at comcast.net>.
1167 kes Add Priority and JobLevel as Python settable items.
1168 kes Use TEMPORARY table creation where the table is created by
1170 kes Add new code submitted by Eric for waiting on specific jobid.
1171 kes Add ACL checking for the dot commands.
1172 kes Fix restore of writable FIFOs.
1173 kes Fix a bug in bpipe where the string was freed too early.
1175 kes Modify the Python class examples to inherit object -kes new way
1176 of defining classes. Patch from Felix Schwarz.
1177 kes Implement jobuid to replace old usage of job in keywords as
1178 suggested by Eric Bollengier.
1179 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1180 wait (wait for all jobs to stop)
1182 wait jobuid=unique id
1184 kes Implement write variables for Python to set Priority (anytime), and
1185 Job Level, only during JobInit event.
1187 kes Fix the block listing bug pointed out by Arno.
1188 kes Update the po files at Eric's request.
1190 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1191 accept time qualifiers.
1192 kes Make catalog respect ACL.
1193 kes Add recycle count to Media record.
1195 Changes to 1.39.6-beta1 24Feb04
1197 kes Add Rudolf Cejka's new rc-chio-changer.
1198 kes Implement pulling Volume from Scratch Pool if the
1199 Volume is in the autochanger.
1200 kes Implement additional command arguments for update Volume.
1204 kes Back port changes to 1.38.5
1205 kes Fix recycle SQL for StorageId.
1206 kes Fix misplaced quote in mtx-changer script.
1208 kes Note. Your database must be updated, or you must create
1209 a new database. I have not yet incremented the database level.
1210 kes Add Location table.
1211 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1213 kes Implement create/get mac record in database for adding extended
1214 Migration data to the job record.
1215 kes Add new MAC table to update/make database scripts.
1216 kes Return Storage name used when getting VolumeNames for a job.
1217 kes Change bsr file keyword Storage to Device, which is more accurate.
1218 kes Ensure that Mac records are pruned/purged.
1219 kes Tweak SD tools to deal with changing media type.
1220 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1221 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1222 that the subroutine can switch devices, and hence dcrs.
1223 kes Modify the multiple MediaType read code to re-use the same
1224 dcr when switching devices. This makes the code much more
1226 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1227 from a table for restore.
1228 kes Add Storage name to VolParams, but it really should be Device.
1230 kes Add disk-changer to scripts directory + configure/Makefile
1231 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1232 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1233 kes Implement new store_bool that stores in a bool.
1234 kes Add true/false to yes/no conf directives.
1235 kes Make first cut at changing appropriate store_yesno to store_bool.
1236 kes Complete implementation of Pool storage devices.
1237 kes Move starting clones to job.c
1238 kes Move create_restore_bootstrap_file() to job.c
1239 kes Make copy_storage() more general to be able to handle
1241 kes Cleanup a lot of migration code for manual running, including
1243 kes Move getting a scratch Volume into a subroutine.
1244 kes Make all places a Volume that is added to a pool to
1246 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1247 kes Fix segfault in restore command when no value specified.
1248 kes Start adding code to handle multiple MediaTypes in restore.
1249 kes Eliminate race condition in getting Volume name for
1250 two drive autochanger.
1251 kes More debug code in autochanger.
1252 kes Add storage keyword to bootstrap file, add parsing.
1253 kes Move slot in bsr file into Volume record as there will be
1254 a different slot for each Volume.
1255 kes Create reserve.h
1257 kes Implement Pool storage overrides.
1259 kes Implement first cut of Migration.
1260 kes Implement mysql_use_result() from patch by Karl Hakimian.
1261 This reduces significantly the memory consumption during
1262 the restore tree building, and hence runs faster too.
1263 kes Implement StorageId patch supplied by user (reggie) in bug
1264 #536. This should permit Bacula to work correctly with two
1266 kes Implement Job listing variations suggested by a user.
1267 kes Move updating bootstrap code in backup.c to subroutine
1268 update_bootstrap_file().
1269 kes Add new job status elapsed time and bytes written user
1270 friendly job report output patch sent by John Kodis
1271 <kodis at comcast.ne>.
1272 kes Implement a storage list in Pools.
1273 kes Separate out setup_job() code from run_job().
1274 kes Get migration working -kes lots of changes in mac.c in both
1276 kes Apply patch from user (Eric Bollengier I think) that fixes a
1277 DIR crash when no arguments are supplied to a dot command.
1278 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1279 kes Fix command arg name->volume in label command of gnome-console.
1280 kes Fix SD acquire.c to release correct DCR by explicitly testing
1281 on the dcr address rather than trying to devine if it is a read
1282 or write dcr. This failed in error conditions when the device was
1286 kes Apply user supplied patch for more readable rate output
1288 kes Continue implementing migration.
1289 kes Implement support for removable filesystems in SD.
1290 kes Ensure that btraceback scripts can be read by anyone.
1291 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1292 kes Correct bug where canceling restore before the FD contacts
1293 the SD causes the drive to be left in read mode.
1294 kes Move ofline_or_rewind into DEVICE::close().
1295 kes Eliminate close_device.
1296 kes Convert several dev subroutines to methods (e.g. bsf,
1298 kes Eliminate force_close_device().
1299 kes Implement Device Type directive in Device resource that
1300 can have values File, Tape, Fifo, DVD, or Prog.
1301 kes Add has_cap() method to Device.
1304 kes Add patch from bug #527 to allow RedHat user to specify
1305 options/user/group for starting each daemon in
1306 /etc/sysconf/bacula.
1308 kes Add two new queries to query.sql provided by Arno. One
1309 list volumes known to the Storage device, and the other
1310 lists volumes possibly needing replacement (error, ...).
1312 kes Add periodic (every 24 hours) garbage collection of memory
1313 pool by releasing free buffers.
1315 kes Correct bug counting sized (for display only) in smartall.c
1316 kes Print FD mempool stats if debug > 0 rather than 5.
1318 kes Make db_lock() mutex error fail the job rather than abort
1319 Bacula. Canceling the job caused the mutex to fail.
1320 kes Correct bug in alist.c that re-allocated the list if the
1321 number of items goes to zero.
1322 kes Move the reservation system thread locking to the top level
1323 so that one job at a time tries all possible drives before
1325 kes Implement a reservation 'fail' message queue that is built
1326 and destroyed on each pass through the reservation system.
1327 These messages are displayed in a 'Jobs waiting to reserve
1328 a drive' list during a 'status storage='. Note, multiple
1329 messages will generally print for each JobId because they
1330 represent the different problems with either the same drive
1331 or different drives. If this output proves too confusing
1332 of voluminous, I will display it only when debug level 1
1333 or greater is enabled in the SD.
1335 kes Add enable/disable job=<job-name>. This command prevents
1336 the specified job from being scheduled. Even when disabled,
1337 the job can be manually started from the console.
1338 kes During 'update slots' clear all InChanger flags where the
1339 StorageId is zero (old Media records).
1341 Beta release 1.38.4:
1343 kes Fix autochanger code to strip leading spaces from returned
1344 slots number. Remove bc from chio-changer.
1345 kes Back port a bit of 1.39 crypto code to reduce diffs.
1346 kes Fix first call to autochanger that missed close()ing the
1347 drive. Put close() just before each run_program(). Fixes
1350 kes Add PoolId to Job record when updating it at job start time.
1352 kes Pull in more code from 1.39 so that there are fewer file
1353 differences (the new ua_dotcmds.c, base64.h, crypto.h
1354 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1355 util.c. Aside from ua_dotcmds.c these are mostly crypto
1357 kes Implement new method of walking the jcr chain. The
1358 incr/dec of the use_count is done within the walking
1359 routines. This should prevent a jcr from being freed
1360 from under the walk routines.
1365 kes Start implementing Verify list output.
1366 kes Move the suitable_drive flag to a better place to prevent
1367 premature termination of the reservation if all drives
1368 are busy -kes should fix Arno's diff/inc pool failures.
1370 kes Add mutex to single thread VSS code in Win32.
1372 kes Simplify code in askdir.c that waits for creating an appendable
1373 volume so that it can handle multiple returns from the wait
1375 kes Modify the wait code to permit multiple returns.
1376 kes Return a zero when 'autochanger drives' is called and
1377 it is not an autochanger.
1378 kes Make rewind_dev() a method taking a DCR as an argument.
1379 This permits closing and reopening the drive if the
1380 rewind fails as happens if the drive was loaded while the
1381 file descriptor was open. This refreshes the file descriptor.
1382 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1383 if the device is open or not. This should eliminate
1385 kes Return error if reserve cannot find at least one suitable device.
1386 kes Make wait_for_sysop() return correct state information.
1387 kes Fix Win32 state file problem. write was not using compat
1388 code. This should fix bug #500.
1390 kes Modify gui on command to set only GUI mode and not batch.
1391 kes Modify .messages command to always print messages regardless
1393 kes If GUI mode is on, suppress automatic printing of
1395 kes Delete old bnet packet code.
1396 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1397 wx-console. -kes not implemented because bconsole must be updated.
1398 kes Modify restore command in wx-console to set gui on and to use
1399 only .messages instead of messages. Hopefully this fixes bug
1401 kes Fix seg fault in exit of acquire when canceling a job --
1402 reported by Wolfgang Denk
1403 kes Pull in latest reservation system changes from 1.38
1404 kes Make .messages command always print messages regardless
1405 of the automessages flag.
1407 kes Fix seg fault if user labels a drive directory bug #513
1408 kes Remove quotes around Version as it breaks things.
1410 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1411 kes Apply sparse code fix for raw drives and fifos. Bug 506
1412 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1414 kes Correct reservation system to do a last ditch try
1415 for any mounted volume, then anyone anywhere.
1416 kes Add quotes around table Version because of
1417 error in MySQL 4.1.15 -kes bug report submitted.
1418 kes Correct some minor problems with btape in the fill
1420 kes Updates to ssh-tunnel from Joshua Kugler.
1421 kes Added a report.pl program from Jonas Bjorklund.
1422 kes Simplify the O_NONBLOCK open() code for tape drives,
1423 and always open nonblocking.
1424 kes Do not wait for open() if EIO returned (shouldn't happen).
1425 kes Eliminate 3 argument to tape open().
1426 kes Correct the slot # edited in the 3995 Bad autochanger unload
1428 kes With -S on bscan (show progress) do not divide by zero.
1430 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1431 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1432 kes Remove unused code in wait_for_device.
1433 kes Make wait_for_device() always return after 60 seconds of wait.
1437 kes Add stubs for non-crypto build.
1439 kes Use localhost if no network configured
1441 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1442 kes Remove debug print.
1443 kes Add bail_out in error during state file reading.
1445 kes Merge changes made to 1.38.3 into HEAD
1446 kes Add stubs for pygtk-console code
1447 kes Create Makefile.in for pygtk-console code
1449 kes Merge updates into 1.38 branch
1450 kes Update specs to include mysql4 define.
1451 kes Fix when attributes are sent, must be after binit().
1452 kes Stop read_record() if status not ok in second loop.
1453 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1454 and partial records in read_record(). This allows bscan
1455 to get FileIndex at EOT correct.
1456 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1458 kes Fix Win32 built to work with new crypto code.
1459 kes Apply patch supplied by user (slightly modified) to fix
1460 correct detection of holes in block devices and FIFOs.
1462 kes Apply patch supplied by user (slightly modified)
1463 to fix SD hang with multiple pools and bad client
1464 IP. Fixes bug # 508.
1466 kes Add nagios plugin to the examples directory. Submitted by
1468 kes Remove warning message about multiple saves of hardlinked files
1469 from find_one.c as it can generate too many warning messages.
1470 kes Modify most restore error messages to be queued so that they
1471 appear at the end of the job rather than mixted with the restore
1472 listing where they could be 'lost'.
1474 kes Reset timeout values before select() per patch from
1475 Frank Sweetser for problems with non-blocking sockets.
1476 kes Unlink the state file if either reading or writing it gets
1477 errors. Hopefully this will fix Win32 exit problems.
1478 kes Add sanity check in append.c to ensure that dcr is not NULL.
1479 This can happen if multiple drive autochanger SCSI control
1480 channel and drive indicies do not correspond.
1482 kes Get next volume from Scratch pool before creating a volume.
1483 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1484 kes Remove argument from create_bacula_database for SQLite as it
1486 kes Add back index code so that two drive autochangers can get
1488 kes Change a bunch of debug levels to aid debugging autochangers.
1489 kes Fix reservation so that mutexes are properly applied.
1490 kes Rework reservation algorithm so that two drives can be used
1493 kes Landon merged his data encription changes into the HEAD
1494 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1495 If this patch is applied, the number of days can be specified with
1496 'list nextvol days=xx'
1498 'status dir days=xx'
1499 My use case is to be able to preview the next scheduled job (and the
1500 next tape to be used) on fridays if there are no scheduled jobs during
1504 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1505 kes Fix malformatted bnet error message that caused seg fault
1507 kes Applied user patch to improve README.vc8 in src/win32.
1509 kes Add Migrate, Copy, Archive Job types (some where there)
1510 kes Correct some more editing of JobId's (for 64 bit compatibility).
1511 kes Ensure that StorageId is stored in Media record when ever possible.
1512 kes Add Migration Job to Job.
1513 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1514 Next Pool to Pool resource.
1515 kes Add more code to mac.c (migration archive copy).
1516 kes Change Start Storage daemon job to require read and write storage
1518 kes Pass read storage data to SD as well as write storage data.
1519 kes Remove old code from winservice.cpp
1520 kes Break on error in scan.
1521 kes Fix typo in signal.c
1522 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1523 kes Cleanup how find_device() works.
1524 kes Add read output to Status in SD.
1527 kes Add red-black btree routines
1529 kes Remove abs() in bfile.c so that it compiles on Solaris.
1532 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1533 kes Fix bnet-server bug found on OpenBSD. Bug #486
1534 kes Fix cancel failure bug. Bug #481
1535 kes Fix failure when Pool name has spaces. Bug #487
1536 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1537 kes Fix a couple of free()s in src/filed/acl.c
1538 kes Fix memory overrun in bfile.c in building OS X resource
1539 fork filename. Bug #489
1540 kes Add Pool name to SD status output.
1542 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1543 kes Make sure to set storage before trying to set drive.
1544 kes Add bacula_mail_summary.sh to examples directory. It makes
1545 a single email summary of any number of jobs. Submitted
1547 kes Make sure when we do a mount to unblock the device even
1548 if the drive could not be opened.
1550 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1551 and correct a few minor problems to make it build on Linux.
1553 kes Remove delete of CVS from all Makefiles
1554 kes Fix seg fault when clicking on Add button in wx-console
1555 restore panel. Bug #470.
1556 kes Fix copyright date and URL typo -kes bug #468.
1557 kes Change autostart install for FreeBSD to look for rc.conf
1558 rather than rc.local as suggested fix for bug #466.
1559 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1560 grant on status. Bug #465
1561 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1562 update script. Bug #464
1563 kes Tweak #ifdefing a bit in new Win32 stream code.
1564 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1565 kes Add documentation of performance #defines