1 Technical notes on version 1.39
5 kes Make WritePartAfterJob the default so that the last DVD part
6 always gets written to the DVD by default.
7 kes Add additional error messages in migration.
8 kes Suppress redundant error messages in migration (possibly more to do).
9 kes Apply Martin's fix (updated to 1.39) that takes into account
10 run storage overrides in the Director status display.
11 kes Implement, but turn off the submitted code that sets the EOT
12 model on FreeBSD machines. Turning on this code is too risky at
13 this point in the development.
15 kes Implement unique dbid routine for migration to prevent the same
16 JobId from being migrated twice. This should fix bug #709.
18 kes Apply Jaime Ventura's 'mail on success' patch.
19 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
20 if memory usage gets too big.
21 kes Tweak migration to ensure that read/write devices are different.
23 kes Create an AUTHORS file to list Bacula contributors.
24 kes Add Richard Stallman's four GPL freedoms to LICENSE
25 kes Require the conf file to have a valid NextPool for writing the
28 ebl Enable RecycleCount in catalog.
29 ebl Fix "echo python | bconsole" segfault
31 kes Implement code to pass the MediaId to the SD. The SD then uses
32 this MediaId when creating JobMedia records. This fixes a bug
33 with Migration where the MediaId got set to the second Volume
34 read rather than the write Volume. Possibly (unlikely) fixes
36 kes Remove NextPool from Job resource.
37 kes Edit a few numbers in the restore dialog with commas.
38 kes Note, the DIR<->SD protocol has changed.
40 kes Replace () by {} in configure.in for proper HP configuration.
41 kes Shorten some lines over 80 characters in filed/backup.c
42 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
44 Version 1.39.28 released:
46 kes Change error message 'illegal' to 'invalid' -- bug #707
47 kes Add rather primitive device resource deadlock detection in
48 the job queue handler. It detects the same read and write device
49 for migration and cancels the job.
50 kes Start adding a unique_dbid_hander() routine in migration to avoid
51 duplicate mediaids and duplicate jobids.
52 kes Add patch from bug #708 to permit relative paths such as ../xxx
53 in the restore tree routine.
54 kes Add Eric Bollengier's patch to reduce locking time in the SD after
55 despooling, and thus many jobs finish faster.
56 kes Correct locking order of reservations lock and device mutex in
57 reserve.c -- this should correct Arno's deadlock that occurred
58 when doing mount/unmount at the same time a job is reserving a
61 rbn Fixed problems with encryption when combined with compression
62 or sparse files. Unfortunately this means that all previous
63 encrypted backups can't be restored.
64 rbn Fixed problem in bfgets with Windows and Mac end of lines.
65 rbn Fixed bug in Windows version of close_bpipe() that cause programs
66 like bsmtp() to hang waiting for the pipe to be closed. Fixed
67 binary file type problems in open_bpipe().
68 rbn Fixed a number of bugs in the mysql DB scripts.
70 ebl Fix broken runscript on director. (RunBefore, RunAfter)
71 ebl Use M_ERROR instead of M_FATAL in runscript.c
73 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
74 rbn Ignore UTF-8 marker at the start of .conf files.
75 rbn Add stab2cv to 3rd party dependencies. This is a utility I
76 wrote that is licensed under the GPL and available on SourceForge.
77 It converts the stab debugging info generated by gcc into Codeview
78 format. Currently it just translates function names to global
79 symbols. This is sufficient to get reasonable stack traces from
80 Dr Watson and to look at minidumps.
81 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
82 rbn Enable Windows XP look and feel for the tray icons and wx-console.
83 rbn Add Windows specific FileSet example to bacula-dir.conf.
84 rbn Reorganize Start menu so that documentation and configuration are
87 rbn Change daemons and utilities so that if -c is omitted from the
88 command line AND there is no configuration file in the current
89 directory then the 'standard' configuration file (eg
90 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
91 doesn't contain any path separators AND there is no configuration
92 file by that name in the current directory then the 'standard'
93 configuration file directory will be searched for a file by that
95 rbn Fixed restore on Windows so that backslashes as path separators works.
96 rbn Add missing query.sql file to Windows installer.
97 rbn Fixed Windows versions of catalog backup scripts.
99 kes Fix optional files in Makefile.in of src/filed that caused
100 a syntax error when using no optional files.
102 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
103 messages; there is no reason to attempt to load a private key.
104 from master key files.
106 Version 1.39.26 released:
108 kes Apply the three patches from Richard Mortimer.
109 bacula-reposition.patch, bacula-tape-reopen.patch, and
110 bacula-eod.patch. This corrects tape positioning on older devices,
111 and also a problem with btape.
112 kes Apply fix from bug report #696 where writing to a FIFO does not
113 work due to a dumb typo.
114 kes Unlock the tape door before the file descriptor is released. This
115 should fix lots of somewhat subtle failures when using an autochanger.
117 kes Correct mtx-changer bug that I introduced in a recent commit, and
118 pointed out by Robert Nelson -- thanks.
119 rbn Fix Windows' daemons so that messages print to stdout if not
120 running as a service.
121 rbn Add daemon name to trace file name (eg bacula-dir.trace).
122 rbn Fix environment variable expansion in directory names on Windows.
123 rbn Fix autochanger support in fill command.
124 rbn Update SQL scripts to match Unix versions.
125 rbn Fix daemon usage displays.
126 rbn Cleanup bacula-dir.conf template.
127 rbn Install openssl.cnf so that the openssl.exe installed in the
128 Bacula\bin directory can be used to generate keys and
129 certificates for TLS and encryption.
130 rbn Fix cleanup of spool files on Windows.
131 rbn Remove /silent option from daemons on Windows. The new default
132 is the same as the old /silent. To enable the message boxes that
133 previously were suppressed by /silent you must add /debug instead.
134 NOTE: As a result of this change, the first time you upgrade from
135 a previous version of 1.39.x you will receive the message
136 boxes when the remove of the old services succeeds. This
137 is the same behaviour as when migrating from a version prior
139 However, going forward, these message boxes will not appear on
140 upgrades or new installs.
141 rbn Add new /debug option. This option enables the message boxes that
142 previously were suppressed by the /silent option. In addition the
143 daemons running as services will open a console window if this
145 rbn Fix bug with service not being removed on migrated installs. This
146 should correct those cases where the file daemon install was failing
147 when upgrading from versions prior to 1.39.x.
149 kes Turn on heap reporting in Dir with zero debug level.
150 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
151 send the same message to stdout.
153 kes Begin work on new GUI 'console'.
154 kes Make configure look in non-standard MySQL library directory
156 kes Make mtx-changer automatically configure the autochanger wait
157 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
159 kes Correct drop_sqlite_tables.in script to not delete the database.
160 kes When writing to a log file, close and reopen the file descriptor
161 if there is an error writing the file.
162 kes Modify the autochanger loaded?, load, and unload commands to print
163 the full text of any mtx output if there is an error. Helps to
164 ease diagnosis of autochanger problems.
165 kes Correct a few Win32 errno returns in the VSS code so that hopefully
166 a resonable Win32 error message will be printed.
167 kes Convert a few strcat()... to bstrncat() in the Win32 code.
169 rbn Added Windows version of bsmtp.
170 rbn Fixed path search for Windows so that Bacula\bin is automatically
171 searched for programs and scripts.
172 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
175 Version 1.39.24 released:
177 kes Apply dvd find volume patch from Richard Mortimer.
178 kes Eliminate the dvd specific mount routines using only the
180 kes Make update_free_space a method of DEVICE and rename
183 kes Require a messages command acl to be able to receive messages
185 kes Add console, system, and scan job types in util.c.
187 kes Print the Volume purged message only for real jobs to keep
188 from cluttering up the daemon messages.
189 kes Lock the tape drive door while Bacula is using the device.
190 kes Add back the 'No Jobs running' message to FD and SD status because
191 my regression script depends on it, and I'm too lazy to change the
193 kes Start using structure assignments (not too happy about it ...).
194 kes Fix a bug in the tools Makefile that broke on Solaris.
195 kes Unload any autochanger drive during a 'release' command.
197 kes Enhance error message when restoring without bootstrap file.
198 kes Check restored size only for regular files.
199 kes Store Python job level in job record in Dir.
200 kes Add back code to open tape device nonblocking, but if rewind fails
201 release file descriptor.
202 kes Modify acquire.c to first try autoloading the device. Also, ask operator
203 to mount tape if drive cannot be opened.
204 rbn Made Windows service tray status windows resizable.
205 rbn Fixed horizontal scrolling of text in status window.
206 rbn Preserve horizontal and vertical scroll position while
207 updating. This prevents the display being reset to the
208 top line every 5 seconds.
209 rbn Fix Windows cross-compile compatibilty problems with
210 *nix variants such as OS X without the zic command.
211 rbn Eliminate dependency on man2html.
213 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
215 kes Fix a compiler warning in compat.cpp
216 kes Change strcpy to bstrncpy in compat.cpp
217 kes Remove some broken code in bdb_list.c
218 kes Fix, hopefully the last, ACL problem in the restore command.
219 kes Update the README.mingw32
220 kes Add new version of upgrade-win32-client.txt to examples directory.
221 Submitted by Michel Meyers.
222 kes Print an INFO message in the job report when a Volume is marked Purged.
223 rbn Fixed handling of external program and script execution
224 so that the format of the command line is more flexible.
225 Now executable path names containing spaces are translated
226 to the equivalent short name automatically. The result is
227 passed to cmd.exe with the quotes removed.
229 kes Apply the recycle patch from Richard Mortimer.
230 kes Convert a few if statements in dev.c to switch statements.
231 kes Start using print_errmsg instead of bstrerror().
232 kes Print a job message in SD when a job is marked to be canceled.
234 kes All code added back. Fixed block.c read/write to loop only 3
235 times. This apparently keeps the OS from crashing (at least
237 kes The kernel bug still persists. Backup something then immediately
238 do a bscan on the same tape, and the kernel will crash.
239 kes Simplifed tape open(). It no longer uses nonblocking mode, which
240 means that opening with no tape loaded will probably take at least
241 6 minutes before an error is reported.
242 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
243 when doing set_os_device_parameters.
244 kes Report open error in mount.c
245 kes Remove all .exe files from the installer directory on make clean.
247 kes Start adding back removed code.
248 kes Back out a number of changes because backups to tape crash my
250 kes Remove the inetd code from the File daemon.
252 kes Add -c option to pg_dump so that it initializes tables when
254 kes Fix FirstWritten time on Volume to be obtained from SD so that
255 it is the actual time the volume was first written.
256 kes Minor Makefile changes.
257 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
258 ebl Add yes keyword to prune/purge command
260 kes Correct a test in block.c that prevented restore of a DVD from
261 looking at the last part in the spool directory.
262 kes Make some error messages clearer mostly by using the word DVD
263 in the message. Improve infor message in read_record for DVDs.
264 kes Remove DVD kludges in dircmd.c label/relabel.
265 kes Move the dvd relabel code from dircmd.c into
266 write_new_volume_label_to_dvd() adding a relabel argument.
267 kes Rewrite the truncate_dvd() code to be much simpler and
268 more logical. First blow away any spool part, then create a
269 new empty part and write to the DVD.
270 kes Rewrite the can_write_on_non_blank_dvd() code making it
271 only ensure that no valid data is on the DVD -- i.e. it
274 kes Minor Makefile fixes.
275 kes Put attach_dcr_to_dev in a subroutine.
276 kes Make attaching/detaching to/from a device use a flag and
277 only detach if actually attached.
278 kes Add dvd-simulator.in to scripts directory and add to configure.
279 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
280 This could be a cause of a number of drive reservation problems.
281 Note, this code is now in attach_dcr_to_dev().
282 kes Suppress doing Volume updates if it is a system job. This should
283 prevent the DVD label blocking.
284 kes Clear the freespace ok flag in a couple of strategic places.
286 kes Put removing zero sized spool part file in subroutine and
287 call from release_device().
288 kes Add Richard's patch for relabel to dircmd.c, but save and restore
290 kes Rework a lot of subroutines in dev.c to take dcr as an
291 argument. This is done to eliminate the usage of attached_dcrs
293 kes Change truncated_dvd to blank_dvd, which seems more suitable.
294 kes Apply most of Richard Mortimer's truncate patch.
295 kes Create lseek() method for DEVICE that takes dcr as an
296 argument. This is to eliminate the use of attached_dcrs in
297 lseek(). The calls to lseek_dev() must still be changed.
299 kes Apply Richard Mortimer's patches for printing an error
300 message in btape when a DVD is used, and to initialize traceback.
301 kes Added error message to btape when trying to access a file.
302 kes Move prototype of update_slots() to protos.h.
304 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
305 and FDJobStatus to the Director Python variables.
306 kes Make sure valid argument passed to str_to_utime() where Arno
308 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
309 I.e. part of two different patches.
311 kes Modify disk changer to simulate some of the error conditions
313 kes Make sure the close() call in the SD tools is just before the
315 kes Implement dir_get_volume_info() in bls using the patch from
316 Richard Mortimer but call find_num_dvd_parts().
317 kes Implement find_num_dvd_parts() that mounts and scans a DVD
318 and counts the parts.
319 kes Move the omode code in open_dvd() up so that the cannot
320 write on blank disk can check can be bypassed for read mode.
323 kes Disable normal data spooling for DVD writing which uses
324 a different spooling mechanism.
325 kes Apply patch from Richard Mortimer to ensure that the number
326 of DVD parts is correctly updated.
327 rbn Save installer details log in the Bacula directory as
329 rbn Add installer generation of client and storage templates
330 suitable for @inclusion on the director.
331 rbn Mark previously installed Win32 components read-only since
332 deselection doesn't do anything.
334 Version 1.39.22 beta released:
336 kes Fix logic error in handling error return from mtx-changer
338 kes Make status from SD aware of -1 (unknown) Slot status.
339 kes At Eric's suggestion make both the 'slots' and 'drive' commands
340 to the Storage daemon work even if the drive is busy.
341 kes Make two separate Win32 menu links for starting bconsole and
342 wx-console in winbacula.nsi
343 kes Apply DVD part_spooled patch from Richard Mortimer
344 richm@oldelvet.org.uk
345 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
346 rbn Fixed problems migrating settings from previous releases in
347 Win32 installer. Add Readme.txt with an option to show it on
348 the installer Finish page.
350 kes Use get_catalog_resource() to open catalog database
351 to ensure that ACLs are respected and that user is
352 correctly prompted for database.
353 kes Integrate multiple console/director patch from
354 Carsten Paeth calle@calle.in-berlin.de
355 ebl Add character substitution in Job/JobDefs WriteBootStrap.
356 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
357 kes Apply patch supplied in bug #656 to pass priority field
358 in the run dialog to the Director in gnome console
359 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
360 this will fix bug #627 where Bacula eventually gets
361 confused about what Volume it wants.
362 kes Add a new close_part() class in the SD to save the device
363 state around open/close_part/open for DVD writing. This
364 should fix the num_dvd_parts getting zeroed as reported by
366 kes Apply patch from Richard Mortimer that correct edit code
367 for debug output of st_size.
368 ebl Add support of encrypted data stream to bscan.
369 display data_len instead of data content (may be binary)
371 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
372 bcopy. Fixes bug #669 reported by Eric.
373 kes Fix incorrect number of arguments in SQL statement in
374 sql_get.c as reported by Eric.
376 kes Update examples directory.
377 kes Remove unused variable in winservice.cpp
378 kes Make Win32 make command build installer.
379 rbn Add new Install Type page, used to select between Automatic
380 and Custom installs. Automatic installs only prompt for
381 configuration items that can't be reasonably defaulted.
382 rbn Added Bacula logo to page headers.
383 rbn Added Upgrade support
384 - Configuration and component selection are migrated from
386 - Configuration of upgraded components is preserved and
388 - Configuration of new components is handled according to
389 the Automatic / Custom selection.
390 - Component selection is defaulted to previously selected
392 rbn Installation of Server components is disabled on
393 Windows 95, 98 and ME.
394 rbn Added URLs for support, info and upgrades to Bacula entry
395 in Add/Remove Programs.
396 rbn Added Version info to Bacula entry in Add/Remove Programs.
398 kes Correct dvd code that breaks tape labeling.
399 kes Implement Enabled on update slots.
401 kes When doing a label, pass the VolBytes back to the Director,
402 which puts it in the catalog.
403 kes Print an error message if the user attempts to prune an
405 kes Need to start using %ld when sscanfing 32 bit values.
407 kes Correct the counting of VolCatBytes for DVDs.
408 kes Add code to mount.c to require that VolCatBytes corresponds to
409 what is actually found when doing an append.
410 kes Update freespace only after writing on the DVD.
411 kes Remove code that blows away the current part in the spool file.
413 kes Apply new dvd-handler patch from Richard Mortimer.
414 kes Tweak so that debug level 20 shows only DVD commands.
415 kes Correct spooled_part flag in dev.c close() so that it is cleared
416 when the spool file is deleted or does not exist.
417 kes Print part number in read_records when eof hit (restore).
418 rbn Installer default changed to start services on new install.
420 kes Make find with no args in tree restore return error rather than
421 stopping the selection. Fixes bug #665
422 kes Rework DVD writing to ensure that the last part is written
423 on open_next_part when dealing with a spool file.
424 kes Correct the lseek_dev() routine to handle end point correctly
425 (bug introduced by me).
426 kes Allow part number to exceed num_dvd_parts in lseek_dev().
427 rbn Change make_session_key on Windows to use WIN32 APIs to produce
429 rbn Add new tool scsilist.exe which displays the changer, tape and
430 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
431 to add them to bacula-sd.conf.
433 kes Apply dvd-handler patch from Richard Mortimer.
434 kes Apply dvd error check patch from Richard Mortimer.
435 kes Apply bpipe race patch from Richard Mortimer.
436 kes Rework how DVD labels are handled and set append only
437 when part > num_dvd_parts.
439 kes Rework many features of DVD writing and reading. Added many error
440 messages. Most importantly changed part to represent the current
441 part number base zero. This makes current DVD writing incompatible
442 with previous version.
444 kes Add host:port to connect failure messages to FD and SD from Dir.
445 kes Add WhereACL to console ACL list. If nothing is specified, only
446 the default is permitted for restore. Otherwise, *all* allows any
447 path, or you can specify permitted paths. This should allow control
448 over where users can restore files. This is untested.
449 kes Modified message to add a ? (as in loaded?) when querying the autochanger
450 for what Slot is loaded.
451 kes Fixed the use of Slot, so that is more correctly maintained, thus
452 eliminating unneeded duplicate calls to determine what Slot is loaded.
454 kes Install man pages with 'make install'
455 kes wx-console crashes because of differences between Bacula and wxWidgets
456 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
458 kes correct improper indenting in wx-console/console_conf.c
459 kes update wx-console header copyrights
460 kes Fix bug #658 where wx-console mangles file/directory names containing
463 kes Add Media.Enabled flag to client backups for dotcmds.c
464 kes Enforce Media.Enabled=1 for a current restore to work.
465 kes Require restore case 3 to have sqlquery permission to work.
466 kes Remove obsolete del_MAC sql command.
467 kes Ensure that bscan creates Volumes with Enabled=1.
469 Version 1.39.20 beta released:
471 kes Correct missing Client table reference in SQL pointed out by
474 kes Fix Win32 build (new entrypoint, start baculafd).
476 kes Add -n option to bconsole to turn off conio.
477 kes Print JobIds to be migrated in Job Report.
478 kes Add additional user supplied notes to the messages part of
479 bacula-dir.conf concerning multiple email addresses.
480 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
481 kes Add more recent Feature requests to Projects file.
483 kes Apply Maritn's fix to src/win32/Makefile.
484 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
485 kes Implement pruning for Migration and migrated jobs.
486 kes Implement PoolOccupancy migration.
487 kes Implement PoolTime migration.
489 kes If doing a mount, look for a slot, and if specified pass it to
490 the SD so that it can load the autochanger.
491 kes Return DVD=1 flag if a label command is done to a DVD. This
492 permits setting VolParts to 1.
493 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
494 rework ua_label code based on DVD media type to use DVD flag returned.
496 kes Eliminate some compile warnings in dird_conf.c
497 kes Format the bytes field in the terminated jobs part of the status
498 command for the three daemons with suffixes to reduce print size
499 of backup bytes. Suggested by a user.
500 kes When not descending into a directory, print the File= name that
501 triggered it -- makes why not descending a bit clearer.
502 kes Do not unload autochanger when doing a list command -- basic code
503 from Eric Bollengier.
505 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
506 to build-depkgs-mingw32. It now handles two options -h to display
507 help and -C to reextract the source and apply the patches. The -C
508 option is useful for updating the source after new patches are
510 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
511 This allows updating to new versions without having to modify the
512 script and makes it easier to figure out which packages and which
514 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
515 as build-depkgs-mingw32 except they are built using Microsoft Visual C
516 and placed in the depkgs-msvc directory. There is also an
517 External-msvc file to describe the packages.
519 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
521 kes Fix bug #462 incorrect error message printed when client script called
522 from File= was not found.
523 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
524 do a rewind on Solaris when no tape is in the drive (Solaris does not
525 have the detailed errno found on Linux). Added Solaris specific code.
526 Note, this may apply to other OSes as well.
528 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
529 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
530 fix bug 648 - update sqlite script patches, lock out gnome2console
531 builds for platforms with gtk+ < 2.4.
532 Updated build_rpm.sh - add remote source directory, add switch for
533 signing, refine file names.
534 Updated spec file again for Mandriva build as they have this curious
535 custom of silently converting all manpages to bzip2 format just before
536 the final packaging step.
538 rbn Fixed the Windows Makefiles so that they won't accidentally try and
539 pickup binaries for the Unix build. This allows both the Unix
540 build and the Windows build to be built in the same tree without
541 interfering with each other.
542 rbn Fixed error handling and cleaned up mtx-changer.cmd.
543 rbn Added the rest of the database scripts. These are installed but are
544 not yet edited for variable replacement.
545 rbn Broke out the cats functionality from bacula.dll and put into new
546 separate dlls for each database type. At installation time the
547 correct one is copied to bacula_cats.dll.
548 rbn Eliminate the need to install the mysql.dll on client only builds.
549 rbn Moved dird/sql_cmds.c into the cats directory so all the database
550 specific #ifdefs were in the cats directory.
551 rbn Added a new sql_cmds.h with all the declarations for the variables
552 exported from sql_cmds.c.
553 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
554 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
556 kes Correct improperly formatted list command output reported by Dan.
558 kes Correct despool time calculation.
560 kes Remove previous changes to compat.cpp as they create problems.
561 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
562 kes Attempt to fix problems with the msg_queue crashing on Solaris
563 when Bacula is terminating, but problems remain.
564 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
565 name editing problems with too many \\?\es.
566 kes Fix some Bacula source code style problems in compat.cpp.
567 kes Add debug code to compat.cpp and convert non-Bacula debug code
570 kes Change the name of the technical notes file from kes-1.39 to
571 technotes-1.39. Prefix my messages with 'kes '.
572 kes Allow dequeue_messages() to be called twice. Should fix bug
574 kes Add Job type to bscan Job information output.
576 kes Update copyright date in program files, and for the most part
578 kes Implement %q in bsnprintf.c apparently I forgot it.
580 kes Make disk-changer sed command compatible with FreeBSD.
581 kes Make a first cut at a ReleaseNotes and ChangeLog for a
583 kes Make make clean descend into the src/win32 directory.
584 kes Fix some #ifdefing so that Solaris and FreeBSD compile
585 sys/stat.h was turned off.
586 kes Use suffix editing for new transfer rate messages.
587 kes Attempt to come up with a workaround which seems to be an OS
588 bug where write() returns EBUSY. IMO this should not happen.
589 It triggered in truncatebug test. The workaround retries using
591 kes Eliminate a strerror() call in a class method that failed with
593 kes Use rm -rf rather than rmdir to delete the src/win32/release
594 directory during make clean.
596 kes Make bscan ignore ACL streams.
597 kes Update projects files with new Feature Requests.
598 kes Generate current English and French manuals and upload
600 kes Update the home page to include the new British/French flags to
601 switch between translations. Work done by Alexandre Baron.
602 kes Make disk-changer script print an error message if the changer
603 directory is not defined.
604 kes Create a generic DB routine for getting an int (32/64 bit) from
606 kes Add more migration code.
607 kes Add a few more files to .cvsignore here and there.
608 kes Minor fixes for SD write rate and despooling rate.
609 kes Turn off new test code in src/console.c
613 kes Incremented the version number to signify that all of Robert's code
614 for Win32 that was in the branch is now integrated into the HEAD,
615 and that Eric has submitted code that we hope will provide limited
616 backward compatibility with 1.38 file daemons (more testing to be
618 kes I rationalized a few of the names of the variables (mainly jcr names)
619 that are used during migration as keeping three different jcrs at the
620 same time clear in ones head is not easy.
624 eb Tweak new runscript feature to work with 1.38.x FDs.
625 eb Correct crypto.c to fix segfault when restoring an encrypted stream
626 on fd which don't use rsa keys.
627 eb Add yes/no English keywords on localized yes/no questions.
629 kes Several important commits from Robert Nelson for code cleanup and
631 kes Modify console.c so that when conio is enabled, it converts \n to
632 \n\r before outputting to the console. Hopefully this will fix
633 the problems with expect in Perl that Eric saw.
635 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
637 kes Add Comment field to llist of a volume.
638 kes Allow true/false in some yes/no questions.
639 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
640 kes Remove a few /n's when scanning commands from another daemon. This
641 permits adding additional fields later.
642 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
643 kes Update README.mingw
645 kes Tweak authentication to work with 1.38.x FDs.
646 kes Tweak catalog make scripts.
647 kes Fix catalog upgrade scripts so that they work.
648 kes Correct despooling debug code to eliminate race condition.
650 kes Add additional fields as specified by Arno to LocationLog.
651 kes Add comment field to the Media record.
652 kes Add Time field to the Log record.
653 kes Correct migration SQL (thanks to Bill Moran) so that it
654 runs with PostgreSQL also.
655 kes Add spooling/despooling info in status output of SD.
657 kes Spend a lot of time integrating mkcdrec with the rescue disk.
658 kes Add VOLMGMT message class for volume management messages (none yet).
659 kes Add CATALOG as a destination. It goes into the LOG table.
660 kes Implement the Log table in the DB.
661 kes Implement the Location Log table in the DB (for user use).
662 kes At Eric's request add a run_scripts() just after blast_data in
665 kes Add Enabled column to Location, correct some typos in DB schemas.
666 kes Correct bug I introduced into RunScripts enum.
667 kes Add log table to Catalog
668 kes Purge original job migrated if the migration terminates normally.
669 kes Cleanup purging of files/jobs so that it is done only in a
671 kes Add new VOLMGMT message class.
672 kes Add Catalog message destination (user conf code remains to be written).
674 kes Modify read_record and friends to properly deal with migration
676 kes Update debug code in read_record.
678 ======================= Warning ==========================
679 Separate read and write storage in Jobs in the Director. This
680 is a major rewrite of some of the low level code and hence has
681 a high probability of introducing bugs.
682 ==========================================================
684 kes Move the job init code up to *before* the job is put into
685 the job queue (resource allocation queue). This permits the
686 job to establish whether it will read or write or do both.
687 kes Add name() methods to all the resource classes.
688 kes Implement separate read and write storage resource
689 allocation/deallocation in jobq.c
691 ======================= Warning ==========================
692 Implemented new method of getting the default Storage from the Media
693 record rather than from the MediaType for restore. As a fall
694 back, if no Storage is defined, use the MediaType. This
695 eliminates most all prompts if there are multiple MediaTypes
696 used. This is an important and fundamental change.
697 ==========================================================
699 kes Add more detail (Storage, Device) to list of volumes printed
701 kes More code in migrate. In particular start multiple jobs if
703 kes Probably overkill, but ensure that the bsr is unique even within a
705 kes Rework bsys.c drop() so that it now should work as expected.
706 kes Update a bunch of old copyrights -kes particularly in .h files.
707 kes Remove src/lib/bshm.c/h
711 ======================= Warning ==========================
712 All hash codes in the database are now kept in world
713 compatible base64 format (no = filling). This means that
714 all FileSets will be updated and if you are running
715 verify jobs, you must do an InitCatalog.
716 Authentication uses the new algorithm, but should be
717 backward compatible with 1.38.x
718 ===========================================================
720 kes Modify the authentication routines so that the 1.39.15 Director
721 always runs with the compatible binary to base64 code (same as
722 the rest of the world). It will however detect if an SD or
723 FD is running the old code and if that is the case, will use
724 the old algorithm for authentication. However, all consoles must
725 use the compatible algorithm, and all data entered into the database
726 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
727 use the compatible algorithm.
728 kes Rename the cram_md5 routine names to be slightly more appropriate
729 to what they are doing (challenge and respond).
730 kes Robert committed his #ifdef and header cleanup.
732 kes Fix a compiler warning in files/backup.c
733 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
735 kes Robert committed his low impact changes.
736 kes I removed a size_t from the jcr.h definition.
737 kes Update the tape regression scripts (still to be tested).
738 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
739 kes Require done or quit to exit from in memory tree restore.
741 kes Write install/uninstall of new manpages. There are now a
742 pile of man pages. Some of which need a lot of work.
744 ======================= Warning ==========================
745 The --mandir ./configure option now points to the top level
746 man directory. The man files will be installed under
747 mandir/man8 and mandir/man1 as appropriate.
748 ==========================================================
750 kes Add complete text of GPL to LICENSE.
751 kes Implement job report that indicates where Storage and Pool
752 came from -kes with overrides and Pool storage and NextPool,
753 it is all very complicated.
754 kes Create a few common subroutines for backup.c and migrate.c
755 kes Eliminate warning messages from tray-monitor.c
757 kes Apply fix for scheduler for missing unlock_jobs().
758 kes Clean out autoconf caches before rebuilding configure
759 kes Fix the FreeBSD pthreads lib define updated by Dan.
760 kes Add missing semicolon in src/console/console.c
761 kes Add Robert's enhanced version of build-win32-cross-tools
762 as well as his patch file.
763 kes Note, the new gcc options are likely to break building of
764 wx-console or the tray-monitor ...
766 kes Implement Robert's suggestion to suppress printing compile lines.
767 kes Detect GCC correctly (I hope)
768 kes If using GCC (actually g++) add the following compiler flags
769 -fno-strict-aliasing -fno-exceptions -fno-rtti
771 ===================== Warning =============================
772 Turn on new bsnprintf() code. This could cause print output
774 ===========================================================
776 kes Fix crypto when not using openssl. I previously overlooked this.
777 kes Eliminate crypto type punning problems by eliminating void * and
778 using uint8_t * instead.
779 kes Harden authentication failure in FD by single threading errors
780 and forcing a 6 second wait.
782 ===================== Warning =============================
783 Removed 'Accept Any Volume' directive.
784 ===========================================================
786 kes Major cleanup and simplification of regress using shell functions
787 (more tests to be converted to new format)
788 kes Add detection of 64 bit Irix as indicated by user.
789 kes Increment catalog database id from 9 to 10.
790 kes Add a few of the new database fields to the various C++
792 kes Implement code to fill in the most important new fields (e.g.
794 kes Ensure that most of the new fields are in create/get/insert/update.
795 More work to be done.
797 kes Update some very old licenses in src/cats.
798 kes Modify the database format for handling Migration jobs:
799 Add PriorJobId, RealEndTime to Job table
801 Remove Stripe from JobMedia record (not used, wasting space)
802 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
803 Add Cost to Location table.
804 kes Delete mac_record subroutines.
805 kes Add new table values to create/update/get routines as appropriate.
806 kes Update the update_tables and make_tables scripts.
807 kes Make a first cut in using a union where multiple pointers (actually
808 pointers to pointers) are stored.
809 kes Make some changes to base64.c suggested by Robert and others and add
810 a small amount of documentation.
811 kes Add some changes suggested by Peter for Solaris (bregex...)
812 kes Make runscript.h always built because it needs to be pulled into
813 more places. In particular its RES was left out of a union.
814 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
815 This makes it slightly easier to detect uninitialized variables.
817 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
818 sometimes creates install problems.
819 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
820 Nelson's code. More to do.
821 kes Convert a few store_bit to store_bool in filed_conf.c.
822 kes DVD tweak to block.c as supplied by Uwe Muessel.
824 kes Modify configure.in to check for typeof().
825 kes In findlib/attribs.c use typeof instead of templates if possible.
827 kes Implement partial error messages for src/filed/acl.c
828 kes Fix return code to fail when doing update barcodes and
829 Pool resource is not found. This previously caused Volumes
830 to be labeled as cleaning tapes.
831 kes Small updates to projects.
833 kes Add Eric Bollengier patch for new RunScript directive. It breaks
834 compatibility between dird and fd.
836 kes Prevent DVD code from rewriting label if the device cannot be
838 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
839 fix Debian build bug.
840 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
841 kes Integrate manpages contributed by Jose Luis.
842 kes Update projects file.
843 kes Add manpages Makefile.in to configure.in
844 kes Remove installation of bacula.8 in scripts directory.
846 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
848 O_NOATIME is a open() flag which makes it possible to read a file without
849 updating the inode atime (and also without the inode ctime update which
850 happens if you try to set the atime back to its previous value). It also
851 prevents a race condition when two programs are reading the same file, but
852 only one does not want to change the atime. It's most useful for backup
853 programs and file integrity checkers (and bacula can fit on both
856 Recent versions of the Linux kernel and glibc have support for it (the
857 glibc support being mostly copying the O_NOATIME definition to
858 bits/fcntl.h). If there's no support for it on the kernel, trying to use
859 it does nothing (since the kernel ignores unknown flags).
861 If the kernel has support for it, trying to use it either works, fails
862 silently (mostly in remote filesystems), or returns errno=EPERM (if you
863 are not either the owner of the file or root). A simple way to prevent the
864 failure is to open the file without the flag and set it later with
865 fcntl(F_SETFL), ignoring any EPERM errors.
866 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
867 of restarted jobs to complete (due to a destroyed pthreads conditional
868 variable used by the message thread).
869 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
871 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
872 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
873 colons in query.sql file.
874 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
875 not to create orphans.
876 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
877 in restore long listing.
878 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
879 of incorrect MarkedId.
880 kes Apply patch from adioso bug #616 to correct text in manual (replace
881 Director with File daemon).
882 kes Rework a few of the zlib changes so that they build properly.
885 kes Move DIR 'run' command to SD before starting the message thread
886 as suggested by Cristopher Hull to avoid a race deadlock from
887 two threads using the bsock structure.
888 kes Modify LICENSE to correct some problems pointed out by Debian.
890 kes Correct EOF with no \n lex.c problem.
891 kes Tweak compat.h compat.cpp and merge with apcupsd
892 kes Add additional INFO messages if autochanger cannot be used.
895 kes Simplify Win32 Makefile
896 kes Correct count of buffers/bytes used by smartall.c
897 kes Updated compat.h after porting apcupsd to MinGW.
899 kes Work on getting wx-console building on MinGW. wxWidgets now builds
900 started adding Makefile ...
901 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
903 kes Reloading a bad configuration file doesn't kill director any more.
904 Thanks to fix from Eric Bollengier.
906 kes Fix problem of accents with new Win32 code.
907 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
908 works in the MinGW build with the exception that there
909 is a problem with accented characters -kes i.e. there is
910 some mapping problem with wide characters.
911 kes The code no longer compiles with Microsoft VC++.
913 kes Start implementing Christopher's St.Bernard code.
914 kes Add Christopher's mods for opening files.
915 kes Strip \r \n from Win32 error messages (Christopher)
916 kes Add more info about Win32 system if unknown (Christopher)
917 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
918 kes Fix a number of incorrect strings marked for translation, when
919 they should not be (e.g. commands).
920 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
921 Patches supplied by user in bugs #608 and #599.
922 kes Use most recent of st_ctime and st_mtime in restore tree DIR
923 listing. This fixes some problems with Win32 printing incorrect
925 kes Correct the clock shift comm time calculation between the DIR
926 and the FD. It was added rather than subtracted.
927 kes Strip all backslashes in filenames to be restored on Win32
928 machines -kes the names should all be in Unix format, and if
929 there are any backslashes it is most likely due to an improper
930 FileSet definition, and the files will not otherwise be
932 kes Remove lib/regex.c (replaced by bregex.c).
933 kes Delete src/win32/License.txt
934 kes Modify installer to install LICENSE
936 kes Fix bug in build-win32-cross-tools script reported by Howard
937 kes Implement cross compiled bconsole
939 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
940 kes Write first cut of README.mingw32
941 kes Add back ua_label barcode fix from Rufolf Cejka.
942 kes Integrate the majority of the Mingw cross-tools submission
943 made by Howard Thomson. Everything compiles, with zlib, openssl,
944 and VSS turned off. Linking needs a pthreads library ...
946 kes Add 'Dir Status' button to the gnome console.
947 kes More work on migration.
948 kes Restore non-compatible base64 coding to permit compatibility.
949 kes Display heap stats in Storage daemon without debug level.
951 kes Integrate most of the MinGW changes -kes more to do.
953 kes Implement using pg_config for finding PostgreSQL files.
954 Fixes bug #600. Patch supplied by user.
955 kes Remove -t option from mktemp in mtx_changer.in and use
956 working directory. Fixes bug #578.
957 kes Update job start time after the any run before job so that
958 files created by the script are only backed up once. Fixes
960 kes Strip trailing newline only from filenames entered in
961 the restore command when reading a file. This permits
962 the user to enter filenames with trailing spaces. Fixes
963 bug #549. The user supplied a patch that I modified slightly.
964 kes Use the most recent time (st_mtime, st_ctime) in the dir
965 command in restore. This gives the user a better idea of what
966 the newest file really is. This fixes bug #574. The fix
967 was suggested by the user.
968 kes Implement a compatible version of base64. This permits external
969 programs to duplicate Bacula's base64 algorithm using standard
970 routines. This fixes bugs #296, and 565. Patch submitted by
972 ================= Note ========================
973 Previous Signatures stored in the database are no longer
974 compatible with this. The main downside is for Verify jobs,
975 and doing an InitCatalog run will fix the problem. Also, the
976 authentication between the deamons is changed, so all daemons
977 must be simultaneously upgraded.
978 ==============================================
979 If you don't like this fix, set:
980 const bool compatible = true;
982 const bool compatible = false;
985 kes Ensure that DB signature is never NULL.
986 kes Ensure that DB table names are not translated.
987 kes Fix scheduler to handle time skew (eg daylight savings).
988 kes Fix scheduler to use lock_jobs() to avoid most problems
989 with reload. Window is now milliseconds.
991 kes Apply patch from Christopher Hull
992 kes Allow multiple connections to database with different
994 kes Invalidate the scheduler when doing a reload. Fixes seg
995 fault, but still 60 second window.
996 kes Additional info in Reschedule message.
997 kes Use set_jcr_job_status() everywhere to prevent loss of
999 kes Display peer IP in FD if error from connecting DIR.
1000 kes Don't increment file count for DIRBEGIN.
1001 kes Replace illegal characters in Win32 filename by _.
1002 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1003 kes Hash hard link filenames rather than linked list.
1004 kes Fix for security failure in chdir on Win32.
1005 kes Add CreateDirectoryA/W win32 API entry points.
1006 kes Add /silent option to Win32 FD for Install/Remove service.
1007 kes Always print Heap statistics in FD.
1009 kes Remove the -f option from the chown in Makefile.in for more
1011 kes Change setting the group in Makefile.in to use chgrp for
1013 kes Implement a write_store and read_store to replace
1014 dirstore in reserve.c
1015 kes Implement a Bacula read/write lock for Python rather
1016 than using the Python lock to avoid recursive problems.
1017 kes Correct the uninstall directory names in filed/Makefile.in
1018 as reported by a user.
1020 kes Correct some problems with database creation (new tables).
1021 kes Replace a bunch of old 0x%x by %p.
1022 kes Get first cut of Migration with Job selection working.
1024 kes Change store_bit() to store_bool() for the Spooling in
1025 dird_conf.c -kes bug reported by Robert Nelson.
1027 kes Correct Makefile bug found by Dan Langille.
1029 kes Correct Makefile for Solaris /bin/sh
1030 kes Correct mtx-changer.in for Solaris /bin/sh
1031 kes Abort if a conf resource does not have a Name =
1033 kes Change the name of the regex program to bregex.
1034 kes Add the bwild program to the tools directory. It is similar
1035 to the bregex program.
1036 kes Implement create bregex.h and bregex.c in src/lib from the
1037 Python regexp program.
1038 kes Use the new bregex.c to implement Regex expressions on Win32.
1040 kes More work on migration.
1041 kes Implement wild program in tools directory for testing
1042 wild-cards. Almost identical to the regex program.
1043 kes Up port VSS single thread locking code.
1044 kes Replace N_(..) by NT_(...) to inhibit translation of
1046 kes Modify Makefile to change the permissions on Working Directory
1047 to 770 if the directory is created.
1048 kes Do not fail the Makefile if changing the permissions or
1049 owner/group on WorkingDir fails.
1050 kes Remove early selection of Scratch Volumes in the recycling
1052 kes Correct the old recycling algorithm so that Scratch Volumes
1053 are selected when looking for a Volume in the changer.
1054 kes Correct a typo in the Verify SQL reported by Joe Park.
1056 kes Remove automatic case folding on Windows FDs. You must
1057 explictly use the 'Ignore Case = yes' option.
1058 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1059 scratch volume in an Autochanger early in the 'recycling'
1062 kes Make weof() and clrerror() methods of class DEVICE.
1064 kes Tweak license to include Microsoft restrictions.
1065 kes Move mysql.reconnect to after real_connect(). Thanks to
1066 Frank Sweetser for the patch.
1067 kes Disallow a backslash in a File = directive (Windows junk)
1068 unless the string is quoted.
1069 kes Apply Eric's patch to ua_label.c so that daemon protocol
1071 kes Add NT_ definition for strings that should not be translated.
1072 kes Apply NT_() to ua_label.c
1073 kes Remove timed wait for VSS on Win2K3 as it is not yet
1075 kes Correct bacula.in script to reference bacula-ctl-xx in the
1076 sysconfig directory rather than the bin directory.
1078 kes Fix a long standing bug in the bacula start/stop scripts.
1079 kes Attempt to add the new bacula-ctl-* files to the rpm.
1080 kes Switch to using typeof() for list traversing to avoid
1081 as many FC5 g++ compiler warnings as possible.
1083 kes Split the bacula start/start script into four files:
1084 bacula -kes starts and stops calling other scripts
1085 bacula-ctl-dir -kes starts/stops the director
1086 bacula-ctl-fd -kes starts/stops the File daemon
1087 bacula-ctl-sd -kes starts/stops the Storage daemon
1089 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1090 kes Correct editing of JobId from int to int64 in fd_cmds.c
1091 kes Eliminate FileSet name race with bash_spaces() and multiple
1092 threads by bashing in a local.
1093 kes Fix error return from 'use storage' to print a correct error
1094 message rather than nothing.
1095 kes Correct false re-read last block error message when two jobs
1096 are simultaneously writing at the end of a tape.
1097 kes Simplify exit conditions in the reserve.c code to avoid
1098 possible non-release of reservation_lock().
1099 kes Suffle lock order in reserve to avoid deadlock between
1100 reservation lock and device mutex.
1102 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1103 tracking this down for me !!!! as it broke the Win32 build.
1105 kes Integrate addition of line count limitation to bsmtp -l from
1106 Sebastian Stark <stark at tuebingen.mpg.de>
1108 kes Implement regex test program in tools directory.
1109 kes Attempt to fix time problem with bsmtp with foreign langs.
1110 kes Add strip_trailing_newline() submitted by user.
1111 kes Implement regex matching in migrate.c
1113 kes Fix bug #537 to allow arbitrary time to mount a volume for
1114 restore, if polling is turned on.
1115 kes If dir_user or dir-group is specified in ./configure apply it to
1116 the working-dir. Fixes bug #533.
1117 kes If rescheduling a job cancel the previous incarnation with the SD.
1118 Fixes bugs #566 and 557.
1119 kes Fix bug #567 do_message() definition type conflict.
1122 kes Add more jcr methods and make mutex and use_count private.
1123 kes Create lock/unlock methods for jcr.
1124 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1125 records to get to seek position.
1126 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1127 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1128 terminates correctly by doing pthread_kill(). Do not destroy
1129 SD cond wait variable between executions of the job. Use local
1130 mutex for cond variable to avoid blocking jcr chain. Fix poor
1131 use of jcr use count in jobq.c for restarted jobs.
1132 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1133 lib/jcr.c -kes prevents locking the jcr chaing.
1134 kes Apply patch from bug #564, which corrects listing volumes with
1135 multiple autochangers. Apply same fix to next volume list.
1136 kes Fix bug #562 where restore bootstrap file is not unique.
1137 kes More details in implementing David's migration syntax proposal.
1138 kes Save and restore dcr when swapping drives so that if we have
1139 a write dcr it is not lost.
1140 kes Use new routine lock_reservations() to lock the reservations
1141 system, and call it while looking for a volume in askdir.c.
1142 This could possibly fix bug #543.
1143 kes Stop SD command loop if job is canceled.
1146 kes Remove old code from findlib/create_file.c
1147 kes Rename mac.c migrate.c
1148 kes Add user friendly display of VolBytes in job report.
1149 kes Rename target... to previous... to make it a bit easier to
1151 kes Add selection type and selection pattern to Migration (idea
1152 given by David Boyes).
1155 kes The po files should now be current.
1156 kes Fix new sql_use_result() code to properly release the
1157 buffers in all cases.
1158 kes Use the keyword ujobid to mean the unique job id; job or jobname
1159 to mean the Job name given on the Name directive, and jobid to
1160 be the numeric (non-unique) job id.
1161 kes Allow listing by any of the above.
1162 kes Add the user friendly job report code for reporting job elapsed time
1163 and rates with suffexes from John Kodis <kodis at comcast.net>.
1164 kes Add Priority and JobLevel as Python settable items.
1165 kes Use TEMPORARY table creation where the table is created by
1167 kes Add new code submitted by Eric for waiting on specific jobid.
1168 kes Add ACL checking for the dot commands.
1169 kes Fix restore of writable FIFOs.
1170 kes Fix a bug in bpipe where the string was freed too early.
1172 kes Modify the Python class examples to inherit object -kes new way
1173 of defining classes. Patch from Felix Schwarz.
1174 kes Implement jobuid to replace old usage of job in keywords as
1175 suggested by Eric Bollengier.
1176 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1177 wait (wait for all jobs to stop)
1179 wait jobuid=unique id
1181 kes Implement write variables for Python to set Priority (anytime), and
1182 Job Level, only during JobInit event.
1184 kes Fix the block listing bug pointed out by Arno.
1185 kes Update the po files at Eric's request.
1187 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1188 accept time qualifiers.
1189 kes Make catalog respect ACL.
1190 kes Add recycle count to Media record.
1192 Changes to 1.39.6-beta1 24Feb04
1194 kes Add Rudolf Cejka's new rc-chio-changer.
1195 kes Implement pulling Volume from Scratch Pool if the
1196 Volume is in the autochanger.
1197 kes Implement additional command arguments for update Volume.
1201 kes Back port changes to 1.38.5
1202 kes Fix recycle SQL for StorageId.
1203 kes Fix misplaced quote in mtx-changer script.
1205 kes Note. Your database must be updated, or you must create
1206 a new database. I have not yet incremented the database level.
1207 kes Add Location table.
1208 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1210 kes Implement create/get mac record in database for adding extended
1211 Migration data to the job record.
1212 kes Add new MAC table to update/make database scripts.
1213 kes Return Storage name used when getting VolumeNames for a job.
1214 kes Change bsr file keyword Storage to Device, which is more accurate.
1215 kes Ensure that Mac records are pruned/purged.
1216 kes Tweak SD tools to deal with changing media type.
1217 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1218 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1219 that the subroutine can switch devices, and hence dcrs.
1220 kes Modify the multiple MediaType read code to re-use the same
1221 dcr when switching devices. This makes the code much more
1223 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1224 from a table for restore.
1225 kes Add Storage name to VolParams, but it really should be Device.
1227 kes Add disk-changer to scripts directory + configure/Makefile
1228 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1229 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1230 kes Implement new store_bool that stores in a bool.
1231 kes Add true/false to yes/no conf directives.
1232 kes Make first cut at changing appropriate store_yesno to store_bool.
1233 kes Complete implementation of Pool storage devices.
1234 kes Move starting clones to job.c
1235 kes Move create_restore_bootstrap_file() to job.c
1236 kes Make copy_storage() more general to be able to handle
1238 kes Cleanup a lot of migration code for manual running, including
1240 kes Move getting a scratch Volume into a subroutine.
1241 kes Make all places a Volume that is added to a pool to
1243 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1244 kes Fix segfault in restore command when no value specified.
1245 kes Start adding code to handle multiple MediaTypes in restore.
1246 kes Eliminate race condition in getting Volume name for
1247 two drive autochanger.
1248 kes More debug code in autochanger.
1249 kes Add storage keyword to bootstrap file, add parsing.
1250 kes Move slot in bsr file into Volume record as there will be
1251 a different slot for each Volume.
1252 kes Create reserve.h
1254 kes Implement Pool storage overrides.
1256 kes Implement first cut of Migration.
1257 kes Implement mysql_use_result() from patch by Karl Hakimian.
1258 This reduces significantly the memory consumption during
1259 the restore tree building, and hence runs faster too.
1260 kes Implement StorageId patch supplied by user (reggie) in bug
1261 #536. This should permit Bacula to work correctly with two
1263 kes Implement Job listing variations suggested by a user.
1264 kes Move updating bootstrap code in backup.c to subroutine
1265 update_bootstrap_file().
1266 kes Add new job status elapsed time and bytes written user
1267 friendly job report output patch sent by John Kodis
1268 <kodis at comcast.ne>.
1269 kes Implement a storage list in Pools.
1270 kes Separate out setup_job() code from run_job().
1271 kes Get migration working -kes lots of changes in mac.c in both
1273 kes Apply patch from user (Eric Bollengier I think) that fixes a
1274 DIR crash when no arguments are supplied to a dot command.
1275 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1276 kes Fix command arg name->volume in label command of gnome-console.
1277 kes Fix SD acquire.c to release correct DCR by explicitly testing
1278 on the dcr address rather than trying to devine if it is a read
1279 or write dcr. This failed in error conditions when the device was
1283 kes Apply user supplied patch for more readable rate output
1285 kes Continue implementing migration.
1286 kes Implement support for removable filesystems in SD.
1287 kes Ensure that btraceback scripts can be read by anyone.
1288 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1289 kes Correct bug where canceling restore before the FD contacts
1290 the SD causes the drive to be left in read mode.
1291 kes Move ofline_or_rewind into DEVICE::close().
1292 kes Eliminate close_device.
1293 kes Convert several dev subroutines to methods (e.g. bsf,
1295 kes Eliminate force_close_device().
1296 kes Implement Device Type directive in Device resource that
1297 can have values File, Tape, Fifo, DVD, or Prog.
1298 kes Add has_cap() method to Device.
1301 kes Add patch from bug #527 to allow RedHat user to specify
1302 options/user/group for starting each daemon in
1303 /etc/sysconf/bacula.
1305 kes Add two new queries to query.sql provided by Arno. One
1306 list volumes known to the Storage device, and the other
1307 lists volumes possibly needing replacement (error, ...).
1309 kes Add periodic (every 24 hours) garbage collection of memory
1310 pool by releasing free buffers.
1312 kes Correct bug counting sized (for display only) in smartall.c
1313 kes Print FD mempool stats if debug > 0 rather than 5.
1315 kes Make db_lock() mutex error fail the job rather than abort
1316 Bacula. Canceling the job caused the mutex to fail.
1317 kes Correct bug in alist.c that re-allocated the list if the
1318 number of items goes to zero.
1319 kes Move the reservation system thread locking to the top level
1320 so that one job at a time tries all possible drives before
1322 kes Implement a reservation 'fail' message queue that is built
1323 and destroyed on each pass through the reservation system.
1324 These messages are displayed in a 'Jobs waiting to reserve
1325 a drive' list during a 'status storage='. Note, multiple
1326 messages will generally print for each JobId because they
1327 represent the different problems with either the same drive
1328 or different drives. If this output proves too confusing
1329 of voluminous, I will display it only when debug level 1
1330 or greater is enabled in the SD.
1332 kes Add enable/disable job=<job-name>. This command prevents
1333 the specified job from being scheduled. Even when disabled,
1334 the job can be manually started from the console.
1335 kes During 'update slots' clear all InChanger flags where the
1336 StorageId is zero (old Media records).
1338 Beta release 1.38.4:
1340 kes Fix autochanger code to strip leading spaces from returned
1341 slots number. Remove bc from chio-changer.
1342 kes Back port a bit of 1.39 crypto code to reduce diffs.
1343 kes Fix first call to autochanger that missed close()ing the
1344 drive. Put close() just before each run_program(). Fixes
1347 kes Add PoolId to Job record when updating it at job start time.
1349 kes Pull in more code from 1.39 so that there are fewer file
1350 differences (the new ua_dotcmds.c, base64.h, crypto.h
1351 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1352 util.c. Aside from ua_dotcmds.c these are mostly crypto
1354 kes Implement new method of walking the jcr chain. The
1355 incr/dec of the use_count is done within the walking
1356 routines. This should prevent a jcr from being freed
1357 from under the walk routines.
1362 kes Start implementing Verify list output.
1363 kes Move the suitable_drive flag to a better place to prevent
1364 premature termination of the reservation if all drives
1365 are busy -kes should fix Arno's diff/inc pool failures.
1367 kes Add mutex to single thread VSS code in Win32.
1369 kes Simplify code in askdir.c that waits for creating an appendable
1370 volume so that it can handle multiple returns from the wait
1372 kes Modify the wait code to permit multiple returns.
1373 kes Return a zero when 'autochanger drives' is called and
1374 it is not an autochanger.
1375 kes Make rewind_dev() a method taking a DCR as an argument.
1376 This permits closing and reopening the drive if the
1377 rewind fails as happens if the drive was loaded while the
1378 file descriptor was open. This refreshes the file descriptor.
1379 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1380 if the device is open or not. This should eliminate
1382 kes Return error if reserve cannot find at least one suitable device.
1383 kes Make wait_for_sysop() return correct state information.
1384 kes Fix Win32 state file problem. write was not using compat
1385 code. This should fix bug #500.
1387 kes Modify gui on command to set only GUI mode and not batch.
1388 kes Modify .messages command to always print messages regardless
1390 kes If GUI mode is on, suppress automatic printing of
1392 kes Delete old bnet packet code.
1393 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1394 wx-console. -kes not implemented because bconsole must be updated.
1395 kes Modify restore command in wx-console to set gui on and to use
1396 only .messages instead of messages. Hopefully this fixes bug
1398 kes Fix seg fault in exit of acquire when canceling a job --
1399 reported by Wolfgang Denk
1400 kes Pull in latest reservation system changes from 1.38
1401 kes Make .messages command always print messages regardless
1402 of the automessages flag.
1404 kes Fix seg fault if user labels a drive directory bug #513
1405 kes Remove quotes around Version as it breaks things.
1407 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1408 kes Apply sparse code fix for raw drives and fifos. Bug 506
1409 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1411 kes Correct reservation system to do a last ditch try
1412 for any mounted volume, then anyone anywhere.
1413 kes Add quotes around table Version because of
1414 error in MySQL 4.1.15 -kes bug report submitted.
1415 kes Correct some minor problems with btape in the fill
1417 kes Updates to ssh-tunnel from Joshua Kugler.
1418 kes Added a report.pl program from Jonas Bjorklund.
1419 kes Simplify the O_NONBLOCK open() code for tape drives,
1420 and always open nonblocking.
1421 kes Do not wait for open() if EIO returned (shouldn't happen).
1422 kes Eliminate 3 argument to tape open().
1423 kes Correct the slot # edited in the 3995 Bad autochanger unload
1425 kes With -S on bscan (show progress) do not divide by zero.
1427 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1428 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1429 kes Remove unused code in wait_for_device.
1430 kes Make wait_for_device() always return after 60 seconds of wait.
1434 kes Add stubs for non-crypto build.
1436 kes Use localhost if no network configured
1438 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1439 kes Remove debug print.
1440 kes Add bail_out in error during state file reading.
1442 kes Merge changes made to 1.38.3 into HEAD
1443 kes Add stubs for pygtk-console code
1444 kes Create Makefile.in for pygtk-console code
1446 kes Merge updates into 1.38 branch
1447 kes Update specs to include mysql4 define.
1448 kes Fix when attributes are sent, must be after binit().
1449 kes Stop read_record() if status not ok in second loop.
1450 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1451 and partial records in read_record(). This allows bscan
1452 to get FileIndex at EOT correct.
1453 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1455 kes Fix Win32 built to work with new crypto code.
1456 kes Apply patch supplied by user (slightly modified) to fix
1457 correct detection of holes in block devices and FIFOs.
1459 kes Apply patch supplied by user (slightly modified)
1460 to fix SD hang with multiple pools and bad client
1461 IP. Fixes bug # 508.
1463 kes Add nagios plugin to the examples directory. Submitted by
1465 kes Remove warning message about multiple saves of hardlinked files
1466 from find_one.c as it can generate too many warning messages.
1467 kes Modify most restore error messages to be queued so that they
1468 appear at the end of the job rather than mixted with the restore
1469 listing where they could be 'lost'.
1471 kes Reset timeout values before select() per patch from
1472 Frank Sweetser for problems with non-blocking sockets.
1473 kes Unlink the state file if either reading or writing it gets
1474 errors. Hopefully this will fix Win32 exit problems.
1475 kes Add sanity check in append.c to ensure that dcr is not NULL.
1476 This can happen if multiple drive autochanger SCSI control
1477 channel and drive indicies do not correspond.
1479 kes Get next volume from Scratch pool before creating a volume.
1480 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1481 kes Remove argument from create_bacula_database for SQLite as it
1483 kes Add back index code so that two drive autochangers can get
1485 kes Change a bunch of debug levels to aid debugging autochangers.
1486 kes Fix reservation so that mutexes are properly applied.
1487 kes Rework reservation algorithm so that two drives can be used
1490 kes Landon merged his data encription changes into the HEAD
1491 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1492 If this patch is applied, the number of days can be specified with
1493 'list nextvol days=xx'
1495 'status dir days=xx'
1496 My use case is to be able to preview the next scheduled job (and the
1497 next tape to be used) on fridays if there are no scheduled jobs during
1501 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1502 kes Fix malformatted bnet error message that caused seg fault
1504 kes Applied user patch to improve README.vc8 in src/win32.
1506 kes Add Migrate, Copy, Archive Job types (some where there)
1507 kes Correct some more editing of JobId's (for 64 bit compatibility).
1508 kes Ensure that StorageId is stored in Media record when ever possible.
1509 kes Add Migration Job to Job.
1510 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1511 Next Pool to Pool resource.
1512 kes Add more code to mac.c (migration archive copy).
1513 kes Change Start Storage daemon job to require read and write storage
1515 kes Pass read storage data to SD as well as write storage data.
1516 kes Remove old code from winservice.cpp
1517 kes Break on error in scan.
1518 kes Fix typo in signal.c
1519 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1520 kes Cleanup how find_device() works.
1521 kes Add read output to Status in SD.
1524 kes Add red-black btree routines
1526 kes Remove abs() in bfile.c so that it compiles on Solaris.
1529 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1530 kes Fix bnet-server bug found on OpenBSD. Bug #486
1531 kes Fix cancel failure bug. Bug #481
1532 kes Fix failure when Pool name has spaces. Bug #487
1533 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1534 kes Fix a couple of free()s in src/filed/acl.c
1535 kes Fix memory overrun in bfile.c in building OS X resource
1536 fork filename. Bug #489
1537 kes Add Pool name to SD status output.
1539 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1540 kes Make sure to set storage before trying to set drive.
1541 kes Add bacula_mail_summary.sh to examples directory. It makes
1542 a single email summary of any number of jobs. Submitted
1544 kes Make sure when we do a mount to unblock the device even
1545 if the drive could not be opened.
1547 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1548 and correct a few minor problems to make it build on Linux.
1550 kes Remove delete of CVS from all Makefiles
1551 kes Fix seg fault when clicking on Add button in wx-console
1552 restore panel. Bug #470.
1553 kes Fix copyright date and URL typo -kes bug #468.
1554 kes Change autostart install for FreeBSD to look for rc.conf
1555 rather than rc.local as suggested fix for bug #466.
1556 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1557 grant on status. Bug #465
1558 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1559 update script. Bug #464
1560 kes Tweak #ifdefing a bit in new Win32 stream code.
1561 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1562 kes Add documentation of performance #defines